Related
hi everyone,
I am actually a long time custom ROM flasher started since Desire days, but registered recently because of this problem I have with the Tab 10.1 Wifi.
Despite me trying everything I can think of, I couldn't flash any other ROMs now, including GalaxyTask, Overcome, AOKP CM9, except the stock Honeycomb sans TouchWiz ROM, and of course PhantomTask. I am pretty sure PhantomTask is the last ROM I've flashed until this problem comes up.
I have made sure that I have done a full clean wipe every time before I flash any of them, wipe data -> cache -> dalvik cache, I even format /system partition, but still none of them works. They always get stuck at boot screen, unless the either one of the two ROMs I've mentioned, stock or PhantomTask.
I am sure that my downloads are complete too, as I've checked MD5 for each of them.
So I really don't know what to do now, any ideas?
I'd really want to test out AOKP
How much time are you giving it to boot up?
I've tried flashing CM9 yesterday, and I left it overnight to boot, it still didn't boot pass the logo, and the battery drained out.
I'll give it another try later
Which version of CWM are you using? If you aren't using one of these try updating:
ClockworkMod - 5.0.2.7
http://forum.xda-developers.com/showthread.php?t=1090289
Overcome Recovery v5.1.2.6
http://forum.xda-developers.com/showthread.php?t=1348533
ok I've tried everything I can, and still can't get this to work.
Then finally I've decided to try to unroot and restore everything to stock.
I've followed each and every step of this guide
http://forum.xda-developers.com/showthread.php?t=1474971
After everything is done, Odin is showing the pass sign, according to the video its suppose to reboot into Android, but weirdly its stuck at a black screen. So I unplugged it from the PC rebooted it by holding down power button. But now its stuck at the boot logo, and won't proceed, its been more than 10 mins.
I am still able to boot into download mode, but when I boot into recovery wanting to do a factory reset, it shows a black screen and nothing else.
any idea what's going on?
try using the overcome recovery posted above. there's a link in the post that will take you to the over come site. look for the restore yet tab section and use Odin to restore. follow their instructions exactly an make sure it's relevant to your device first.
this has helped MANY people who had some of the strangest problem start fresh. if you want or need specific links just ask I'll go to my PC where its easier to show you.
hth
Sent from my GT-P7510 using one stinky finger.
OMG
Benzoman said:
try using the overcome recovery posted above. there's a link in the post that will take you to the over come site. look for the restore yet tab section and use Odin to restore. follow their instructions exactly an make sure it's relevant to your device first.
this has helped MANY people who had some of the strangest problem start fresh. if you want or need specific links just ask I'll go to my PC where its easier to show you.
hth
Sent from my GT-P7510 using one stinky finger.
Click to expand...
Click to collapse
I can't believe it WORKED!! THANKS MAN!!
j3nnning said:
I can't believe it WORKED!! THANKS MAN!!
Click to expand...
Click to collapse
COOL! Thanks to you for posting that it worked. Knowing we help is one reason we keep trying to help.
For me personally it's the self gratification of just knowing.
It's kinda selfish I know but it makes me feel good and keeps me trying to help even in the littlest ways my limited knowledge allows.
Again thanks back at you.
Sent from my GT-P7510 using XDA Premium HD app
Just doing a sanity check: using TiBu to restore system data should work (in theory) so long as you restore data that has been backed up from the same ROM, correct?
Thanks for any help.
EDIT: Having power key problems, please see posts #3 and #16 for updated information.
In case it really backs up and restores EVERYTHING - theoretically you're right.
Practically, I'm not sure it's the case. Since you're restoring while running a ROM, I'm not sure you can get everything to exactly the same state.
Thanks for your help, but this question was hiding a bigger one.
So until today, my phone has been working just fine. I'm still running an old, now outdated and unsupported ROM: ShirshirROM pre-alpha ICS. It's been my daily driver for almost a whole year now, works perfectly with Entropy's old ICS kernel.
Yesterday, I got tired of shell errors with Superuser (which I had been dealing with since the latest binary update), so I finally switched to SuperSU. Everything seemed to work fine afterwards, though I noticed some trouble with the power button being a little wonky, i.e. showing up the power menu when I hadn't pressed it or not immediately responding.
Today, my power button doesn't work correctly at all. I tried wiping cache, dalvik, then restoring a Nandroid of the same ROM/Kernel combo from way earlier this year. Key test in CWM also shows that all buttons register when pressed, EXCEPT the power one. Otherwise phone functions are perfect; I can make calls, send/receive texts, etc, I just have to plug in my phone or have something happen for the screen to turn on, and then I have access to everything. My question is, is this (God forbid) a hardware failure? That would be my worst nightmare, seeing as I'm almost exactly one full year out from contract renewal, and I don't have a lot of money to spend on a new one, nor do I have nowhere near enough expertise to try to fix it myself. What can I do?
P.S. The TiBu question was because in case the Nandroid fixed the problem, I could just restore contacts and SMS from TiBu since it is the same ROM, and be back up and running immediately.
P.P.S. As mentioned, I can get into CWM. This is done by pulling battery, sticking it in, and holding all physical keys until boot screen shows twice. But I can't use the power key to select any options, I have to use home. And key test shows the power button not registering. I'm hoping that that means power key may still work, but that's just me praying this is fixable.
So this problem didn't occur at all prior to installing supersu ?
Phalanx7621 said:
So this problem didn't occur at all prior to installing supersu ?
Click to expand...
Click to collapse
No, as far as I recall. I'm not using supersu anymore since I'm on a Nandroid but power button still doesn't work. I have to find alternate ways of activating the screen, like plugging it into a charger or pulling the battery to restart :/
Sent from my SGH-I777
karate104 said:
No, as far as I recall. I'm not using supersu anymore since I'm on a Nandroid but power button still doesn't work. I have to find alternate ways of activating the screen, like plugging it into a charger or pulling the battery to restart :/
Sent from my SGH-I777
Click to expand...
Click to collapse
Run a Rom that will support siyah 4.3.3 or siyah 5.0.1 and enable swipe to wake.
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
Run a Rom that will support siyah 4.3.3 or siyah 5.0.1 and enable swipe to wake.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Is that my only option? How can I test for sure that it's a hardware failure and my power button is completely useless?
Sent from my SGH-I777
Full wipe and return to out of the box stock. If the issue persists, it's hardware.
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
Full wipe and return to out of the box stock. If the issue persists, it's hardware.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
After full wiping, if the problem is fixed I should be able to restore the Nandroid from earlier this year without retriggering it, right? Or is that out of the question now?
Sent from my SGH-I777
karate104 said:
After full wiping, if the problem is fixed I should be able to restore the Nandroid from earlier this year without retriggering it, right? Or is that out of the question now?
Sent from my SGH-I777
Click to expand...
Click to collapse
No one will know until you try it, as yours appears to be a unique issue if it is being caused by software/firmware.
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
No one will know until you try it, as yours appears to be a unique issue if it is being caused by software/firmware.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
So I backed up stuff, then went ahead and flashed bone stock using the Odin3 One-Click from 2a in creepy's guide. I can't get past the initial setup wizard though, because Google Services Framework (process com.google.process.gapps), Calendar Storage (process.com.android.providers.calendar), and other Google apps processes keep force closing when I click the Android to start. I was able to boot into stock e3 recovery (again using three-button combo), but I can't select anything using the power key.
I didn't do a full data wipe/factory reset before flashing, and I can't get to the main menus to do so because my phone won't get past the setup wizard, which keeps crashing. What do I try next?
EDIT: I know that I was able to make selections using a CWM-enabled ICS kernel; home key functioned as select. I have the CWM-flashable zip, and I wanted to know if there's anyway to flash this kernel using Odin. I know it won't boot (custom ICS kernel with Gingerbread stock rom), but if I can get into recovery, I can use the home key to do a full data wipe/factory reset, then I'd Odin stock kernel+ROM again and see if that fixes things. So my question is, how do I flash a CWM-zipped kernel in Odin? (You can tell I never use Odin)
EDIT2: I'd still like to know how I can flash a CWM-zipped kernel in Odin, but I'm gonna hold off on it as it would trip the counter and I found out my phone is still under warranty, hooray! They're sending a refurb'ed replacement that should be here in a couple days, I can test that out and see if I can get me up and running again before I decide to do something really rash like trip the counter. It sucks cause I'm going out of town on Thursday but the replacement is arriving Friday, and I won't be back until next Wednesday. I'm stuck using my old iPhone 3G until then :/
I do know you can't flash this from Odim. You'll need another kind of file. Tar file... I don't remember.
Don't know where to find it.
I don't think you should back to stock. Just wipe and formating everything could test it.
Find an app that allow you to get recovery from android like rom toolbox lite.
Download mrRobinson AeSedai Aroma.
After formating and wiped everything, flash your rom and don't get out of recovery. Flash AeSedai just after. Flash gapps and KERNEL from AeSedai.
Must be an cm10 or aokp rom... Any rom from that source.
Sent from my SGH-I777 using xda app-developers app
RatusNatus said:
I do know you can't flash this from Odim. You'll need another kind of file. Tar file... I don't remember.
Don't know where to find it.
I don't think you should back to stock. Just wipe and formating everything could test it.
Find an app that allow you to get recovery from android like rom toolbox lite.
Download mrRobinson AeSedai Aroma.
After formating and wiped everything, flash your rom and don't get out of recovery. Flash AeSedai just after. Flash gapps and KERNEL from AeSedai.
Must be an cm10 or aokp rom... Any rom from that source.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
How would I format and wipe everything if I can't get past the setup wizard on bone stock 2.3.4? I can't install apps, make calls or texts, nothing. All I can do is select the language and make emergency calls. I can't wipe in stock e3 recovery either because the power button doesn't work.
I need a way to either Odin a kernel from which I can use the home button to make selections, or find some other way to remotely format and wipe my phone. Is there a way for me to put my phone in USB debugging mode so I can maybe use ADB? I can't access the settings menu...
Don't u use home button to select things in stock recovery?
Phalanx7621 said:
Don't u use home button to select things in stock recovery?
Click to expand...
Click to collapse
Nah, it's power key. I double checked again this morning. Oh, and I guess it's called 3e recovery, not e3 xD.
One other note, when pulling battery, then putting it back in, phone autoboots. I have to hold buttons then place battery in to boot to recovery, and for download mode, I have to have it plugged in, buttons held, then place battery in to get to download mode.
EDIT: Would anyone be willing to do me a huge favor? I want to find out if Entropy's DD GB kernel, the Odin-flashable tar one, can use home as select in CWM. Would someone be willing to temporarily flash DD_01242012 from here to check for me? It's a CWM zip, the changes are very tiny between it and the previous 01232012 Odin one. I just don't want to Odin it myself and trip the counter to find out it was useless, especially since I don't have a jig to reset the counter.
So an update:
While looking around for a way to root my new refurb model which came shipped with stock ICS, I found creepy's Stock ICS with root package, and I thought, "I told AT&T I was on ICS, I guess I should actually put ICS on my phone instead of leaving GB (UCKH7) on there. Maybe since I was on ICS before I can get past the gapps force closing too and do a factory reset from the settings menu." Sure enough, after flashing stock ICS, I was able to get past the darn wizard and toy with it. I do have problems of course: calendar still force closes, and the phone will randomly reboot after some period of using it. But at least I was able to access stuff.
My data was all still there, all pictures, contacts, settings, etc. I realized that before I do a data wipe/factory reset, I should heed the emmc superbrick bug warning and NOT do that with stock ICS kernel. I still had ES file explorer and root access, so I went in and manually deleted all data as much as possible, to make it look like my phone did have a factory reset done as I said to the AT&T representative. I've deleted wifi access points, browser history/cookies/cache, all contacts, texts, pictures/videos, downloads, all CWM zips and backups, all installed apps, all accounts that were signed in...
My newest questions are:
1) is there anything I'm missing that I should delete so that my phone does not look like it's been modified in any way? Also, any personal data I'm missing that needs to be deleted? I still have root access so I can delete anything I want.
2) Should I go ahead and risk the brickbug and actually do a factory reset/data wipe, or should I just let it be since I've deleted most things manually (and not potentially send them a useless brick lol)? Actually, since I'm rooted, I can install Mobile Odin to flash a CWM-enabled kernel, then wipe data/factory reset safely from there; that is, assuming my phone doesn't do a random reboot in the middle of flashing the kernel. I do run the risk of it rebooting while flashing and possibly bricking something else. So should I do that and take that risk, should I take the risk of wiping data from the stock kernel, or is there no reason to take either risk anymore?
3) Is there anywhere I can find a non-rooted stock UCLE5 ICS Odin-flashable tar, that I can flash before sending the phone back?
How about:
1. Flash back to stock GB
2. Wipe Data
3. Upgrade to stock ICS via kies or OTA
Sent from my SGH-I777 using xda premium
Red_81 said:
How about:
1. Flash back to stock GB
2. Wipe Data
3. Upgrade to stock ICS via kies or OTA
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Thanks for your help, but I can't do that. If I could, I wouldn't be stuck in this predicament.
Power key doesn't work at all, but it is necessary to make selections in stock 3e recovery. Hence, I can't wipe from recovery, either on stock GB or ICS.
Stock GB rom doesn't boot past Setup Launcher due to gapps force-closes. These force closes prevent me from reaching the settings menu within stock GB to do a wipe there.
My two options for wiping data are using stock ICS ROM (under settings menu), or flashing a custom kernel using Mobile Odin, then wiping with the home key in CWM. Both are risky: stock ICS ROM uses the stock kernel to wipe, possible brickbug there. My phone currently experiences random reboots without warning; a reboot during a Mobile Odin flash could also brick something. My question is, should I do either one, or neither at all?
What about wiping through ADB?
Adb shell
Wipe data
Or
Adb recovery --wipe-data
Sent from my SGH-I777 using xda premium
Red_81 said:
What about wiping through ADB?
Adb shell
Wipe data
Or
Adb recovery --wipe-data
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Well, that previously wasn't an option on GB since I couldn't put the phone in debugging mode, but I can now in ICS so in theory it should work. The question now is, will the phone do one of its random reboots while I'm working with it in ADB...
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I have a T-Mobile Galaxy Vibrant that was running Android 2.1. I rooted the phone (successfully), and installed Slim Bean 4.2.2 plus Google apps. Everything was going smoothly and I was reinstalling apps and data when I noticed that I had no network phone connection. Slim Beam did not seem to recognize the sim, and I came up empty searching for networks. I removed the sim and put it in another phone, and everything was fine.
I decided to restore the previous android 2.1 (which I had backed up) using ClockWorkMod Recovery. I did restore, then reboot. Now the only thing I get is the initial screen ... Vibrant and Samsung in bold white letters. I have tried repeatedly to launch CWM Recovery, without success.
Is it time for a new phone?
Thanks!
MaydayMalone said:
I have a T-Mobile Galaxy Vibrant that was running Android 2.1. I rooted the phone (successfully), and installed Slim Bean 4.2.2 plus Google apps. Everything was going smoothly and I was reinstalling apps and data when I noticed that I had no network phone connection. Slim Beam did not seem to recognize the sim, and I came up empty searching for networks. I removed the sim and put it in another phone, and everything was fine.
I decided to restore the previous android 2.1 (which I had backed up) using ClockWorkMod Recovery. I did restore, then reboot. Now the only thing I get is the initial screen ... Vibrant and Samsung in bold white letters. I have tried repeatedly to launch CWM Recovery, without success.
Is it time for a new phone?
Thanks!
Click to expand...
Click to collapse
If you can't go to cwm menu as well than I guess a jtag is needed. Or there may be some other solution, try digging through the net... or the experts in here can help u as well
Sent from my Micromax A87 using xda premium
MaydayMalone said:
Is it time for a new phone?
Thanks!
Click to expand...
Click to collapse
Are you able to get into download mode? I would recommend taking a look at this video if your unsure how to get into download mode https://www.google.com/url?sa=t&sou...f1zo4TtaBqqpMHcnw&sig2=u29A32xeMmrpJpMo2hwuxA.
Sent from my SCH-I535 using xda premium
Thanks for the suggestions
Thanks for the suggestions, but my phone is somewhat "challenged." I got it for free (that's the good news). The previous owner gave it to me after the power port/usb connector got damaged (that's the bad news). As I understand it, all the suggestions require a usb connection ... something I've been able to live without for the last year. Maybe I should give it a shot and get the usb port repaired, or maybe it would be cheaper/smarter to go shopping. I'm going to need time to think about that.
Thanks again to both of you.
MM
MaydayMalone said:
Thanks for the suggestions, but my phone is somewhat "challenged." I got it for free (that's the good news). The previous owner gave it to me after the power port/usb connector got damaged (that's the bad news). As I understand it, all the suggestions require a usb connection ... something I've been able to live without for the last year. Maybe I should give it a shot and get the usb port repaired, or maybe it would be cheaper/smarter to go shopping. I'm going to need time to think about that.
Thanks again to both of you.
MM
Click to expand...
Click to collapse
If there's any way you can get into cwm mode then you can first add the zip file of the custom rom from your pc to your sd card via a card reader and then try to flash a new rom. I think the problem you are getting at the moment is because you did not format dalvik cache and some other things before flashing
Sent from my Micromax A87 using xda premium
RazaVakil7995 said:
If there's any way you can get into cwm mode then you can first add the zip file of the custom rom from your pc to your sd card via a card reader and then try to flash a new rom. I think the problem you are getting at the moment is because you did not format dalvik cache and some other things before flashing
Sent from my Micromax A87 using xda premium
Click to expand...
Click to collapse
I keep trying to launch CWM Recovery, but no such luck. The initial screen with Samsung and Vibrant appears, then nothing. I have to pull the battery to turn the phone off. I did wipe the dalvik cache before installing Slim Bean, but not before the reboot. Thanks for following up, but I've got a bad feeling about this.
MM
MaydayMalone said:
I keep trying to launch CWM Recovery, but no such luck. The initial screen with Samsung and Vibrant appears, then nothing. I have to pull the battery to turn the phone off. I did wipe the dalvik cache before installing Slim Bean, but not before the reboot. Thanks for following up, but I've got a bad feeling about this.
MM
Click to expand...
Click to collapse
The last resort is probably the samsung service center. They'll repair it for a hefty price but that'll be less than the price of a whole new phone..... sorry about your loss
Sent from my Micromax A87 using xda premium
Hello everyone, Forgive me if I seem a bit flustered, but I am. I was adding a few fonts with an app from the play store. It would restart after each fine, and there was no issue. On the final one, it restarted, but then got hung up for 10 minutes on the ATT logo. I have restarted it with the power button numerous times now, and it has done nothing different. I have only rooted the phone, I have no custom recovery or anything. I booted into the LG stock recovery, canceled the reset, and it still hung up at the ATT logo.
What might have happened, and how can I fix this? I would rather not hard reset, but if I have to, I have to. Please respond with anything at all that might help me. I'm using my old GSII right now, and the newer sim doesn't fit quite right in it. I can make calls and stuff, but i want to get back on the OG as fast as possible. PLEASE respond with anything helpful. Thanks.
I am running stock Jellybean (The initial jellybean we got, I think it was 4.1.1), rooted. No custom roms, no custom recovery.
UPDATE: I did a factory reset (by holding power and volume down). It is still doing the same thing. It gets to the ATT logo and plays the music "Dee dee dee dee 'click'", then stops. Nothing more happens. At all. I've let it sit for a while and nothing is happening. So now the question is, how can I save it with that in mind?
chrisphoenix7 said:
UPDATE: I did a factory reset (by holding power and volume down). It is still doing the same thing. It gets to the ATT logo and plays the music "Dee dee dee dee 'click'", then stops. Nothing more happens. At all. I've let it sit for a while and nothing is happening. So now the question is, how can I save it with that in mind?
Click to expand...
Click to collapse
Sound like you need to use LGNPST or use a teenybin then flash a custom ROM. Factory reseting ( I think) only clears out the /data partition which is where all user and app data is saved. If something in the /system partition is not allowing it to boot, that is why the factory reset didn't work. To fix you have to restore the /system partition back to stock.
To do so, flash a full bin. Which will reset the phone to complete stock (no root, no unlocked bootloader).
Or you can flash a teenybin. Which is smaller and safer. Flashing a teenybin unlocks the bootloader and puts a custom recovery. From there you can just flash a new ROM.
Joecascio2000 said:
Sound like you need to use LGNPST or use a teenybin then flash a custom ROM. Factory reseting ( I think) only clears out the /data partition which is where all user and app data is saved. If something in the /system partition is not allowing it to boot, that is why the factory reset didn't work. To fix you have to restore the /system partition back to stock.
To do so, flash a full bin. Which will reset the phone to complete stock (no root, no unlocked bootloader).
Or you can flash a teenybin. Which is smaller and safer. Flashing a teenybin unlocks the bootloader and puts a custom recovery. From there you can just flash a new ROM.
Click to expand...
Click to collapse
Thanks. Do you know if there's an accurate guide on how to do the teenybin? It's been ages since I've done anything more than root, and I'm not sure what to search for.
chrisphoenix7 said:
Thanks. Do you know if there's an accurate guide on how to do the teenybin? It's been ages since I've done anything more than root, and I'm not sure what to search for.
Click to expand...
Click to collapse
The directions to use the Teenybin are in the OP found here: http://forum.xda-developers.com/showthread.php?t=2230994
The hardest part is getting LGNPST working properly. But that's easy now thanks to the auto install.
Did u fix your phone?
Going to assume teeney bin worked for op. It did for me when I had issues
Sent from my LG-E970
Apologies all, yes I got it working... Mostly. WiFi quit working completely (refused to connect), phone calls took forever to go through, and other odd issues. I'm running it off an old backup of ICS on my external SD. The issues were too much for me to handle, and I was scared to do anything more, so I've got a Moto x. I'm going to try to correctly fix the OG now, so hopefully by documenting the process I can help someone else.
Sent from my XT1058 using xda app-developers app
chrisphoenix7 said:
Apologies all, yes I got it working... Mostly. WiFi quit working completely (refused to connect), phone calls took forever to go through, and other odd issues. I'm running it off an old backup of ICS on my external SD. The issues were too much for me to handle, and I was scared to do anything more, so I've got a Moto x. I'm going to try to correctly fix the OG now, so hopefully by documenting the process I can help someone else.
Sent from my XT1058 using xda app-developers app
Click to expand...
Click to collapse
i was scared to use teenybin like you but 4.4 lured me into trying. Give teenybin a try its not that bad. you just need to install it, download the teenybin, launch the program, boot your phone into download mode and run the program with the dll and bin files selected.
optimusv45 said:
i was scared to use teenybin like you but 4.4 lured me into trying. Give teenybin a try its not that bad. you just need to install it, download the teenybin, launch the program, boot your phone into download mode and run the program with the dll and bin files selected.
Click to expand...
Click to collapse
I used the Teenybin. It worked enough so I could install my backup. The OS got wiped completely, so I think the kernel just couldn't handle all the stuff it had to anymore.
Sent from my XT1058 using xda app-developers app
I used LGNPST to make full recovery and i dont have any problems with this software.. if want help just ask me.. i will guide you..
Is there a way to unroot the GS4 MJ7 if I've rooted it with the Vroot method in the General forum?
My wife's GS4 has lost core functionality ever since the 4.3 OTA push from Samsung. She couldn't even open the dialer up and place a call, it simply crashes.
I decided to root her phone for her with the Vroot method, after doing a factory reset. (The Verizon rep in store said the 4.3 software was conflicting with the 4.2.2 and that a factory reset would be necessary.)
Alas that neither rooting nor the factory reset fixed the dialer issue. She still can't dial a call. Obviously at this point I need to take it into Verizon and have them give her a new phone. Pretty unacceptable that an OTA before even being rooted caused this issue for her.
So, is there an image I can put on for MJ7 with Odin?
Check this thread for a complete device wipe/repartition and emergency recovery image you can flash with Odin. I would bet that this may solve your problem. You will obviously lose all your data, so take the necessary precautions. Good luck.
larue05 said:
Is there a way to unroot the GS4 MJ7 if I've rooted it with the Vroot method in the General forum?
My wife's GS4 has lost core functionality ever since the 4.3 OTA push from Samsung. She couldn't even open the dialer up and place a call, it simply crashes.
I decided to root her phone for her with the Vroot method, after doing a factory reset. (The Verizon rep in store said the 4.3 software was conflicting with the 4.2.2 and that a factory reset would be necessary.)
Alas that neither rooting nor the factory reset fixed the dialer issue. She still can't dial a call. Obviously at this point I need to take it into Verizon and have them give her a new phone. Pretty unacceptable that an OTA before even being rooted caused this issue for her.
So, is there an image I can put on for MJ7 with Odin?
Click to expand...
Click to collapse
If your a Verizon customer you can use the software tool to restore to factory after using Vroot to root your s4. I did backed up everything as well.
Sent from my SCH-I545 using xda app-developers app
Chris-M. said:
If your a Verizon customer you can use the software tool to restore to factory after using Vroot to root your s4. I did backed up everything as well.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Do you have link where I can DL software tools.
Sent from my SCH-I545 using Tapatalk
Kchitown1977 said:
Do you have link where I can DL software tools.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Plug your phone in to your PC. A drive will show up with the Verizon Recovery Agent.
Yea just plug into pc
Sent from my SCH-I545 using xda app-developers app
k1mu said:
Plug your phone in to your PC. A drive will show up with the Verizon Recovery Agent.
Click to expand...
Click to collapse
I'll try again not at comp right now. Tried last night kept getting error...ty
Sent from my SCH-I545 using Tapatalk
Kchitown1977 said:
I'll try again not at comp right now. Tried last night kept getting error...ty
Click to expand...
Click to collapse
No problem. This recovery will wipe the phone, but it does avoid the whole ODIN thing.
If you can't get it to work, PM me and I'll get you a copy of the software.
A video of this would be awesome! But does this method remove the lock on bootup?
Sent from my SCH-I545 using XDA Premium 4 mobile app
ksteele123 said:
A video of this would be awesome! But does this method remove the lock on bootup?
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Making a video would require me to wipe my phone. Not happening.
Yes, this will remove the "Custom" flag that shows up at boot time.
Thank you, great info
Sent from my SCH-I545 using XDA Premium 4 mobile app
The verizon software works great. Just to let people know, after its done the phone will reboot. It will show 'custom' when it reboots. Once its finished booting up, turn off your phone and then turn it on again. The 'custom' text and icon will be gone.
Thanks to those who shared this method
k1mu said:
Plug your phone in to your PC. A drive will show up with the Verizon Recovery Agent.
Click to expand...
Click to collapse
Hmm.
I wish I could say that I see that Recovery Agent. When I connect to my PC all I see is the S4 Portable Media Player -- which when opened shows the Card and the Phone.
And oddly enough the device is listed as an S4 Active -- which it is not it is a plain vanilla S4 (Rooted)
Where might I find the Recovery Agent?
thanks
maplewood said:
Hmm.
I wish I could say that I see that Recovery Agent. When I connect to my PC all I see is the S4 Portable Media Player -- which when opened shows the Card and the Phone.
And oddly enough the device is listed as an S4 Active -- which it is not it is a plain vanilla S4 (Rooted)
Where might I find the Recovery Agent?
thanks
Click to expand...
Click to collapse
Are you running a fully stock ROM? If so, the drive should show up when you plug in your phone. At least that's the case with mine.
I just tried it on my MJ7 phone - the drive shows up for a minute or so then disappears. Disabling USB debugging doesn't seem to change that.
Sounds like Kies may be your only choice.
k1mu said:
Are you running a fully stock ROM? If so, the drive should show up when you plug in your phone. At least that's the case with mine.
I just tried it on my MJ7 phone - the drive shows up for a minute or so then disappears. Disabling USB debugging doesn't seem to change that.
Sounds like Kies may be your only choice.
Click to expand...
Click to collapse
yes, stock rom.
A drive does show up -- but there is not Agent on it.
The device shows up as a separate entry but that doesn't have it either.
No big deal. There is a .99 app and if I've got ten minutes Kies or Odin will do it I suspect.
Sorry to bring up an older thread, but I'm having a peculiar issue that has to do with this thread.
I'm trying to upgrade to MK2 on my VZW S4 (which is currently rooted via VROOT on MJ7), but I keep reading that I need to unroot my phone before taking the upgrade and rooting again. Well, that's all fine and dandy, especially when I ran across this thread saying I could simply use the Verizon Recovery Agent. The only problem is, When I follow the instructions to get to the recovery agent, I instead get a "VZW Upgrade Assistant".
Is there a way to bypass the upgrade assistant to get to the recovery agent?
Is it actually necessary to unroot prior to taking the upgrade? Can I do a system recovery from the phone itself and then do the upgrade?
Thanks!
Drychembrehm said:
Sorry to bring up an older thread, but I'm having a peculiar issue that has to do with this thread.
I'm trying to upgrade to MK2 on my VZW S4 (which is currently rooted via VROOT on MJ7), but I keep reading that I need to unroot my phone before taking the upgrade and rooting again. Well, that's all fine and dandy, especially when I ran across this thread saying I could simply use the Verizon Recovery Agent. The only problem is, When I follow the instructions to get to the recovery agent, I instead get a "VZW Upgrade Assistant".
Is there a way to bypass the upgrade assistant to get to the recovery agent?
Is it actually necessary to unroot prior to taking the upgrade? Can I do a system recovery from the phone itself and then do the upgrade?
Thanks!
Click to expand...
Click to collapse
Can't say I know the answer to your direct question but running MJ7 I too do not get the Recovery Agent.
maplewood said:
Can't say I know the answer to your direct question but running MJ7 I too do not get the Recovery Agent.
Click to expand...
Click to collapse
When I plug in my (MK2) phone, I get a drive offering the Upgrade Assistant. I assume that's what it's currently called.
so here is the deal go throught with the software assistant and it istall it after it is installed then it will give u 2 options to upgrade assistant and software repair assistant use that one one of my recommendations is to use back of pc usb ports it kept freezing at 66 percent and that seemed to have solved it good luck i am at 73 percent and moving...