[Q] Xperia Sola Bricked, I guess please help :) - Sony Xperia P, U, Sola, Go

Hey there, I know there is couple of thread's about this already but neither of the solutions seem to work for me. I tried to flash stock 6.1.1.B.1.10 into my xperia sola using Flashtool. Everything seemed to go allright but after that I got stuck with black screen. Tried hard reset and hard shutdown but even if I do that the phone wont go to flash mode neither fastboot mode. The led doesn't respond in any way. Only thing I managed to get out of the phone is the vibration indicating hard reset and three vibrations indicating hard shutdown Please help, I already spent 2 days trying to root this little *****.

This link might help u..
http://forum.xda-developers.com/showthread.php?t=2432633&page=2

Related

I need help

Recently I tried to root my Xperia Neo L and now Im having trouble I cant seem to get on to flashmode/fastboot mode after I did the part where DooMLoRD_v1_Xperia-2011-ICS-ROOT was needed and I cant flash the last ftf which is supposingly to boot my phone back to normal Im stuck with a flashing red light can anyone help me asap?
BakaTeddy said:
Recently I tried to root my Xperia Neo L and now Im having trouble I cant seem to get on to flashmode/fastboot mode after I did the part where DooMLoRD_v1_Xperia-2011-ICS-ROOT was needed and I cant flash the last ftf which is supposingly to boot my phone back to normal Im stuck with a flashing red light can anyone help me asap?
Click to expand...
Click to collapse
If all else fails, repair your phone with PCCompanion.
Google and download it
Please write thread title which reflects your problem. Edit your post in advanced mode.
Are you sure that your battery is charged?
Did the rooting process finished fine?
Root process involve few restarts, possible that your battery got to 0%..
What happens when you connect your phone to charger(wall charger, not usb) and leave it for some time?

[Q]Any KATA T2 user's here? Need help!

Hello thanks for dropping by on my thread.
Please do help me to unbrick my tablet it's Kata T2 (Fish Tablet).
I've been reading through google for 5hours unfortunately didn't had any best results.
So maybe someone here or if there are any alternative steps to unbrick my tablet that you would recommend. Please do give advice or suggestion.
The problem is I have a "lying android with red triangle logo".
Tried to wipe data & wipe cache and everytime I do a reboot the fish logo appear (default logo) and proceed again to the lying android logo. Could you help me what to do?
If you're asking for a "backup" thing. the answer is NO.I don't have those.. And you might ask for the stock ROM too .. the answer is NO..
So please help me with this.. Thanks!..
same here
i also have a problem with kata t2. i rooted it with vroot then after it rebooted. the logo comes out but after that the screen goes to black. i know its turned on because i can see the light in the lcd but the problem is it wont reboot normally. i have tried to go to recovery mode data erased it to factory setting even deleted the cache but the problem still remains it wont boot normally and stays in black screen. if somebody would help us it will greatly appreciated. :good:
PS: i ask them if they can provide a stock firmware and the answer is they cant. any tips on how can i get it to boot back to normal? the stock firmware by the way is 4.1.1 jellybean... Happy new year
just return go to the nearest service center... i have also bricked mine and said to the technician some lies (virus) . trust me they dont know that you bricked it becauese of rooting it... maybe they just dont care..
Join the Kata T2 group in facebook.. they might help you there..
hey i found a new way to unbrick your kata t2. havnt tried it yet but try it!
1. turn off your kata t2
2. press power button and volume down until kata logo (fish) comes out
3. press again power button and volume down you will see the android logo with exclamation point
4. press power button and volume UP and you will go to recovery.... there you would find recover system from back up. click on it.
Just a suggestion ^_^

[Q] Help ! My phone restarts in a loop.

When I was installing a font at first, I had to reboot my phone for the font to appear on my phone. When i reboot, it shows the sony logo. Then it shows the XPERIA logo. On the xperia logo, it faded off in red blue and green. And then it just keeps restarting and restarting the whole process all over again. My phone is an xperia SP and rooted. No roms were installed, just the stock rom. And also, previously when i reboot to change my other fonts, it worked perfectly before. Please Help !
I did try to find other threads but, can't find any. Maybe i cant search the right keywords. Any suggestions? or Any way to recover my phone? Or is it just bricked?
:| Please Reply ASAP. Thank you and have a great day ahead ! |:
I did checked other forums, threads and etc. but they did not have this same exact problem. Please Help !!!

[HELP][bricked] Please anyone Help i've bricked my lenovo a5000

Hello everyone , today i received a notification from lenovo that there is a new lenovo firmware update , i got so excited and i pressed ddownload buytton then it said that u can brick our device because this phone is rooted , so i unrooted the device completly and downloaded the firmware update wheni pressed the install button it restarted to the recover and showed an android toy laying down and the software upgrade percentage as a bar on the android phone screen, i thaught its normal and then it showed a little text under android logo that said "error" i thaught its just a normal failure and i will now just start the phone to normal mode and when i realised its been a lot of time phone is not turning on , found out im stuck at the bootloop, now i dont know how to ubrick it plz help, ill be thankful to you, plz repl and help now before it's battery dies and becomes dead phone. plz tell me a quick way to fix that ive tried to factory reset via recovery mode i am only able to visit the recovery screen my phone is unrooted, and i can also connect it to pc, plz tell me how to flash stock firmware
,EDITED : NOW I CANT turn on my device it is not turning on,now im unable to go to recover manu all i can do is when i connect it to my pc i hear a sound from my computer that something is connected and i cant turn on it's screen i tried all types of key combinations i cant turn it on plzzzzz help. Anyone?
not bricked
alihassan1397 said:
Hello everyone , today i received a notification from lenovo that there is a new lenovo firmware update , i got so excited and i pressed ddownload buytton then it said that u can brick our device because this phone is rooted , so i unrooted the device completly and downloaded the firmware update wheni pressed the install button it restarted to the recover and showed an android toy laying down and the software upgrade percentage as a bar on the android phone screen, i thaught its normal and then it showed a little text under android logo that said "error" i thaught its just a normal failure and i will now just start the phone to normal mode and when i realised its been a lot of time phone is not turning on , found out im stuck at the bootloop, now i dont know how to ubrick it plz help, ill be thankful to you, plz repl and help now before it's battery dies and becomes dead phone. plz tell me a quick way to fix that ive tried to factory reset via recovery mode i am only able to visit the recovery screen my phone is unrooted, and i can also connect it to pc, plz tell me how to flash stock firmware
,EDITED : NOW I CANT turn on my device it is not turning on,now im unable to go to recover manu all i can do is when i connect it to my pc i hear a sound from my computer that something is connected and i cant turn on it's screen i tried all types of key combinations i cant turn it on plzzzzz help. Anyone?
Click to expand...
Click to collapse
hey there ,sorry for the late reply ,but i just read the question .
if you can log into bootloop then your phone isn't really bricked .
can you get into the recovery ? if so ,you should just delete the cash and the delvic cash and reboot .you'll be able to get out of bootloop .
amr elfiky said:
hey there ,sorry for the late reply ,but i just read the question .
if you can log into bootloop then your phone isn't really bricked .
can you get into the recovery ? if so ,you should just delete the cash and the delvic cash and reboot .you'll be able to get out of bootloop .
Click to expand...
Click to collapse
hey buddy, mine is somewhat similar but i did hard reset and cleared cache partitions but when i try to switch it on, still says no command. any help please,.
you can reach me at [email protected]
thanks in advanced!
kasmotsadamori said:
hey buddy, mine is somewhat similar but i did hard reset and cleared cache partitions but when i try to switch it on, still says no command. any help please,.
you can reach me at [email protected]
thanks in advanced!
Click to expand...
Click to collapse
what do you mean it says no command. ? can you please elaborate ?
Same problem to me, need help
http://ainotech.com/how-to-flash-lenovo-a5000-receive-root-custom-recovery/
It worked for me now my phone is working better then it was before , I think it will work for you too,

anyone please help me. i just bricked my phone

the phone's model is nubia Z5s mini nx404h. the thing is this model is only sold to Philippines and Russia and its pretty outdated its jelly bean 4.3 but the thing is i rooted it. flashed the suitable TWRP for my device. and i accidentally wiped cache/dalvik then it restarted to recovery thrice even if i choose to reboot to system. the information about this device is so scarce that i had to spend 29 hours just trying to find a way to unlock the bootloader. i succeeded but now this. after certain reboots to recovery i shut it down. and tried to restart it, next thing that's happened its stuck with ZTE logo. buttons dont work. the battery cannot be removed, and its past the 2 weeks handset warranty so im doomed. now every time i try to charge it and connect it into a computer logo will show, again. and it computer says usb not recognized, then thats it. buttons not working nothing is working. please help. im trying everything, almost everything. thanks to anyone who will be kind enough to help me.

Categories

Resources