Hey guys,
Recently switched from AT&T to Straight Talk and I have no HPSA+ nor LTE. I just see the H icon (I am on CFXE). I've flashed a bunch of stuff but before the most recent ROM installation I installed the AT&T JB radio (from the radios thread). In addition, a Straight Talk APN appeared automatically which lines up with the values they suggest you put in:
Name: StraightTalk ATT
APN: tfdata
Port: 80
MMSC: http://mms-tf.net
MMS Proxy: mms3.tracfone.com
MMS Port: 80
MCC: 310
MNC: 410
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled (grayed out, box checked)
Any suggestions? Anyone on ST have LTE working?
Thanks!
You need to call their customer service, ask to be transferred since you have a being your own device) tell them you need lte provisioned in your lte phone... it took me 4 calls but they finally did it for me... otherwise use the old apn
Also buying a new sim will unlock lte
Sent from my LG Optimus G using Tapatalk
I just joined, so I ought to have the right SIM right? I'll try calling them
carrett said:
I just joined, so I ought to have the right SIM right? I'll try calling them
Click to expand...
Click to collapse
Yeah I bought my sim back in December but they were able to add it so you should be good.... They will all tell you that they don't offer lte on art Sims then they will tell you to change the apn to the old one... Just be persistent lol most of them are clueless...
Sent from my LG Optimus G using Tapatalk
Did you make sure that LTE is enabled in Network Mode? For some reason, I change it to GSM/WCDMA/LTE and it changes right back to WCDMA only. I can't figure it out.
Straight Talk has awful customer swervice
That awful customer service is largely why it is so inexpensive.
Sent from my LG Optimus G using XDA Premium 4 mobile app
Straight talk like net 10 which I am on are similar try to use an Att straight talk sim you won't even have to unlock the phone and you will also get LTE as I am.
Sent from my LG-E970 using XDA Premium 4 mobile app
Related
so i rooted and flashed the generic global 2.1
noticed i only had edge
under network operators i have ATT DR listed
H works when i switch to gsm/wcdma
but the DR has me worried, is that roaming?
svtfmook said:
so i rooted and flashed the generic global 2.1
noticed i only had edge
under network operators i have ATT DR listed
H works when i switch to gsm/wcdma
but the DR has me worried, is that roaming?
Click to expand...
Click to collapse
You need to enter your APN settings
<name> att
<apn> wap.cingular
<proxy> wireless.cingular.com
<port> 80
<username> not set
<password> not set
<server> not set
<mmsc> http://mmsc.cingular.com
<mms proxy> wireless.cingular.com
<mms port> 80
<mcc> 310
<mnc> 410
<apn type> not set
i have the apn setup, i am getting "H"
my concern is that the only network operator listed is ATT DR
svtfmook said:
i have the apn setup, i am getting "H"
my concern is that the only network operator listed is ATT DR
Click to expand...
Click to collapse
H means 3G+. This is the upgraded network from AT&T. It is faster. This is what T-mobile advertises as "4G" although that is not true. So this is normal. You will occasionally drop to 3G in areas where HSPA+ has not been implemented yet.
As for ATT DR, I am not sure what that is. But, I would not worry about it too much. If you are using an AT&T SIM, and have AT&T coverage in your area then you are fine.
just talked to my friend who is an att rep. he said att dr may just be the data gateway for android devices.
I was under the impression that when the HSUPA cap was lifted through 4.1.83 that our phones would show HSPA instead of still showing HSDPA under Access Points.
Am I looking in the wrong place on the phone, or is my understanding incorrect.............the latter being normal for me!
check settings -> about phone -> Status
mine says HSPA
co.ag.2005 said:
check settings -> about phone -> Status
mine says HSPA
Click to expand...
Click to collapse
Thankee!
Showing HSPA there.
shouldn't it say hspa+ ?? isn't hspa and hspa+ different? I saw this article regarding this topic:
"For the sake of this paper, the terms UMTS, HSPA, and HSPA+ will be used interchangeableand synonymously. Technically, there are differences between UMTS, HSPA, and HSPA+, butmost operators are deploying the latest solutions. "
http://www.scribd.com/doc/48556485/LTE-and-UMTS-Terminology-and-Concepts
banes said:
shouldn't it say hspa+ ?? isn't hspa and hspa+ different? I saw this article regarding this topic:
"For the sake of this paper, the terms UMTS, HSPA, and HSPA+ will be used interchangeableand synonymously. Technically, there are differences between UMTS, HSPA, and HSPA+, butmost operators are deploying the latest solutions. "
http://www.scribd.com/doc/48556485/LTE-and-UMTS-Terminology-and-Concepts
Click to expand...
Click to collapse
It looks like you answered your own question with the quote. The question is if there is a difference in the way they are all labeled on the phone itself.
mine shows UTMS and when it's transferring data HSDPA but then again i am not in the US.
Your phone should show UTMS most of the time. If you are not knowingly transferring data check your running programs
IrateCustomer said:
It looks like you answered your own question with the quote. The question is if there is a difference in the way they are all labeled on the phone itself.
Click to expand...
Click to collapse
Agreed so do we truly have hspa+ or just hspa? How can we know?
By the way shouldn't I be seeing h+ symbol? I only see h while transferring data despite my system info saying Hspa?
UMTS here too
mine says Mobile Network Type HSDPA in so cal.
Should it says HSPA. I am confused.
On 4.1.83
This is strange... I'm on fido and I think we share rogers towers and they always advertise hsdpa but yet its showing up hspa on mine.
Edit: btw I'm on the telstra.. and I've set it to wcdma only.
Sent from my Motorola Olympus
per someones suggestion that I keep my related questions in this thread
banes said:
Okay so I have successfully upgraded to 1.8.3 and checked my phone settings which states I'm using hspa. No + and my lil h in the corner of the system tray is also alone with no + accompanying it. I have a smartphone unlimited plan, not the 4g plan or whatever. Is this what 4g should look like? If not what are your apn settings? I am located in cali on att. How do I know for sure? Browsing isn't blazing fast at least not on xda. Any help is mucho appreciated.
Click to expand...
Click to collapse
btw my apn settings are
APN Name: AT&T
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: cingular1
Server: <Not set>
MMSC: http:/mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Not set>
APN type <Not set>
Hey you guys has anyone experienced this happening?
After flashing each T-mobile modem individually I can not receive a LTE signal, I can however receive ATT 4G and T-mobile seems to work. After flashing back to the stock ATT modem is when I receive LTE as normal.
I'd appreciate any comments/suggestions/stories about this. Help!
Uhm tmobile doesnt have lte.. it only has hspa + (4g) I wish it did tho...I wish it did
I must have forgotten to mention I am using At&t SIM card and I'm not getting an LTE signal (only 4G) after flashing to the T-mobile modems available to gain T-mobile's 4G/HSPA+
any ideas why I'm not getting Att LTE now?
Oh sorry i misunderstood. Idk man I cant offer much help then. Did you try resetting your apn settings? Also what rom are you on? GB or ICS?
no havent tried that , how do i do that on the gnote?
i'm on GB rom
Its going to be in the settings go to networks and there should be apn in there. These are the APN settings
Well . Here is AT&T 's LTE apn anyways ..
Name: AT&T pta
APN: pta
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC:310
MNC:410
Authentication Type: None
APN Type: internet + mms
checked it out and the settings were already there. I then reset to default for good measure but with the same result.
i noticed i have this:
Apn type: internet + mms + supl
jT415Gz said:
checked it out and the settings were already there. I then reset to default for good measure but with the same result.
i noticed i have this:
Apn type: internet + mms + supl
Click to expand...
Click to collapse
Same here let me know if u find a fix
Sent from my SAMSUNG-SGH-I717 using xda premium
i'm scratching my head to read your post OP. You complained that you didn't get LTE signal after you flashed Tmobile modem, but you have LTE when you flashed back to ATT modem and you are using ATT SIM.
I still don't get it why the heck you need to flash Tmobile modem for while using ATT SIM?
sweetboy02125 said:
i'm scratching my head to read your post OP. You complained that you didn't get LTE signal after you flashed Tmobile modem, but you have LTE when you flashed back to ATT modem and you are using ATT SIM.
I still don't get it why the heck you need to flash Tmobile modem for while using ATT SIM?
Click to expand...
Click to collapse
I have SIM cards for both carriers but I mostly use AT&T's.
I'm sorry but the T-Mobile and AT&T modems are mutually exclusive. The T-Mobile modems are pulled from other devices that do not have lte hardware. The AT&T modem does not enable the T-Mobile HSPA+ bands. You can't have both. If you honestly use both Sims, keep a copy of each modem and flash whenever you swap.
knight4led said:
I'm sorry but the T-Mobile and AT&T modems are mutually exclusive. The T-Mobile modems are pulled from other devices that do not have lte hardware. The AT&T modem does not enable the T-Mobile HSPA+ bands. You can't have both. If you honestly use both Sims, keep a copy of each modem and flash whenever you swap.
Click to expand...
Click to collapse
I appreciate the reply. So you are saying in order for me to receive either, HSPA+ or LTE, that I have to flash back and fourth...
Here is the source of the method I used:
http://rootgalaxynote.com/galaxy-no...e-3g4g-hspa-on-your-att-galaxy-note-sgh-i717/
and quote from that tutorial at the very bottom of that page:
"There’s also a hack you can switch bands by dialing *#2263# but you don’t have to do this, just leave it on Auto so you can use both T-Mobile and AT&T SIM cards with one modem. No, you don’t have to flash the AT&T modem back to use AT&T. "
Im pretty darn sure it is unlocked i wanna use my verizon lg g3 on tmobile as my sony got water damaged (shocking right "waterproof") if it is how to i change it to tmobile setting to work cause i need it switched asap has same sim card and i know it should work with HSPA+ only
All vzw LTE phones are globally unlocked and can be used with "global" sim
Sent from my VS985 4G using Tapatalk
laxattack said:
All vzw LTE phones are globally unlocked and can be used with "global" sim
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
And domestic. You may or may not need to root to be able to change the apn.
Sent from my iPhone using Tapatalk
i got it working thanks guys
G3
I also was thinking about getting a g3 from Verizon to use with T-Mobile. I was wondering if you had to unlock it or did it automatically work and are you getting 4g?
seanjohn4554 said:
I also was thinking about getting a g3 from Verizon to use with T-Mobile. I was wondering if you had to unlock it or did it automatically work and are you getting 4g?
Click to expand...
Click to collapse
Make sure you have the correct APN settings and have fun. HSPA+ only I believe.
Any trick to getting the stock SIM out other than resorting to tweezers? It's a tight fit in there.
I used a pencil eraser.
I am planning to buy my friends LG G3 from verizon which he has activated on verizon and is been using it for a week or so. Do I need to unlock that phone to use it with my AT&T sim card? Will it be able to access 4G LTE?
aaruhani said:
I am planning to buy my friends LG G3 from verizon which he has activated on verizon and is been using it for a week or so. Do I need to unlock that phone to use it with my AT&T sim card? Will it be able to access 4G LTE?
Click to expand...
Click to collapse
You can pop in your SIM, set the correct APNs and it will work fine on AT&T. Some people report they have LTE if AT&T uses band 4 in your area, otherwise you will HSPA/HSPA+
Here is a link for the correct APNs: http://www.att.com/esupport/article.jsp?sid=KB424489&cv=820#fbid=ujA3THHGA0a
no 4g lte?
I tried the AT&T sim with the apn settings, but only getting H ? Not getting 4G or 4G LTE speed. Please help me out here.
aaruhani said:
I tried the AT&T sim with the apn settings, but only getting H ? Not getting 4G or 4G LTE speed. Please help me out here.
Click to expand...
Click to collapse
Are you saying this because it shows "H" on that status bar or you ran a speed test and the speeds are that of h and not HSPA+ ?
With the correct APN settings the VS985 will get 4gLTE on both T-Mobile or AT&T (AIO/Cricket too), but only if they are using band4 in your area. Otherwise, H, H+, EDGE, whatever else is available works fine. Remember to reboot after settings things up.
Sent from my VS985 4G using Tapatalk
Ran the speed test too
daniel4653 said:
Are you saying this because it shows "H" on that status bar or you ran a speed test and the speeds are that of h and not HSPA+ ?
Click to expand...
Click to collapse
I ran the speed test and getting maximum of 8 mbps download and 2 mbps upload. This is definitely not 4G LTE speed. Below are the apn settings that I am using :
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http : // mmsc . mobile . att . net (being a new user I am not allowed to post the full link)
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,mms,supl,hipri
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: unspecified/LTE (tried both)
aaruhani said:
I ran the speed test and getting maximum of 8 mbps download and 2 mbps upload. This is definitely not 4G LTE speed. Below are the apn settings that I am using :
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http : // mmsc . mobile . att . net (being a new user I am not allowed to post the full link)
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,mms,supl,hipri
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: unspecified/LTE (tried both)
Click to expand...
Click to collapse
Are you on ATT's post paid or prepaid service? I am on their prepaid and LTE is capped at 8-9 Mbps
Your APNs seem correct.
Postpaid
daniel4653 said:
Are you on ATT's post paid or prepaid service? I am on their prepaid and LTE is capped at 8-9 Mbps
Your APNs seem correct.
Click to expand...
Click to collapse
I am on ATT postpaid.
Lollipop update
I am using Verizon LG G3 on AT&T network (AT&T sim card). I was wondering how will I get the OTA update for Android 5.0 Lollipop? Do I have to use the verizon sim card in order to receive the update? Please advise
I know that all lte phones has to come unlocked,but will I be able to use this phone in South Korea under SK telecom [cdma] and get 4G? Thanks
aaruhani said:
I am using Verizon LG G3 on AT&T network (AT&T sim card). I was wondering how will I get the OTA update for Android 5.0 Lollipop? Do I have to use the verizon sim card in order to receive the update? Please advise
Click to expand...
Click to collapse
you'll receive the ota no matter which sim you use.
Sounds Great
crazy4android said:
you'll receive the ota no matter which sim you use.
Click to expand...
Click to collapse
That sound's wonderful. Thanks.
Sooo I have the US998 variant of the v30, or more specifically the V30+, and I use AT&T as my carrier, I have a plan for 4G LTE on AT&T, But my phone only gets what would be considered 3G, as it shows 4G on the phone, but apps like speedtest recognize it as 3G, and the speeds aren't the best, I've also had to use a different APN for actually being able to use my data.
Software Version= US99830B
APN I'm Using:
APN= wap.cingular
port= 9201
username= [email protected]
password=CINGULAR1
MMSC= http://mmsc.cingular.com
MMS Proxy= wireless.cingular.com
MMS Port= 80
MCC= 310
MNC= 410
APN Type= default,mms,supl,hifli
I don't know if that helps, but if any more information is needed, I will provide it.
LGAGaming said:
Sooo I have the US998 variant of the v30, or more specifically the V30+, and I use AT&T as my carrier, I have a plan for 4G LTE on AT&T, But my phone only gets what would be considered 3G, as it shows 4G on the phone, but apps like speedtest recognize it as 3G, and the speeds aren't the best, I've also had to use a different APN for actually being able to use my data.
Software Version= US99830B
APN I'm Using:
APN= wap.cingular
port= 9201
username= [email protected]
password=CINGULAR1
MMSC= http://mmsc.cingular.com
MMS Proxy= wireless.cingular.com
MMS Port= 80
MCC= 310
MNC= 410
APN Type= default,mms,supl,hifli
I don't know if that helps, but if any more information is needed, I will provide it.
Click to expand...
Click to collapse
You are using some kind of outdated APN.
I have US998 V30/V30+ on AT&T, as does my wife, my mother, sister, brother-in-law, several friends.
See screenshots below.
ChazzMatt said:
You are using some kind of outdated APN.
I have US998 V30/V30+ on AT&T, as does my wife, my mother, sister, brother-in-law, several friends.
See screenshots below.
Click to expand...
Click to collapse
Yeah I know I'm using an old outdated vpn, but it's the only one that actually allows me to use my data.
LGAGaming said:
Yeah I know I'm using an old outdated vpn, but it's the only one that actually allows me to use my data.
Click to expand...
Click to collapse
Change your APN if you want LTE and data.
Do you not see my speed test? That's not even the fastest. If you have LTE of course you have data, and FAST data at that.
ChazzMatt said:
Change your APN if you want LTE and data.
Do you not see my speed test? That's not even the fastest. If you have LTE of course you have data, and FAST data at that.
Click to expand...
Click to collapse
I've tried AT&T's nxtgenphone apn, the phone apn, and neither of them let me use LTE.
LGAGaming said:
I've tried AT&T's nxtgenphone apn, the phone apn, and neither of them let me use LTE.
Click to expand...
Click to collapse
Then you should ask AT&T what's wrong with your account. Everyone I know with US998 V30/V30+ on AT&T is using the APN I have.
Each speed test uses about 100MB data, by the way.
LGAGaming said:
I've tried AT&T's nxtgenphone apn, the phone apn, and neither of them let me use LTE.
Click to expand...
Click to collapse
What phone did you switch from? I assume you just put your SIM card in from the old phone?
For some reason, AT&T thinks you have a 3G phone. That's why the "AT&T Phone" APN doesn't work for you and only the outdated WAP APN works. You need to contact them and tell them you have US998.
When I went to their store I told them I had US998 and if they didn't know what the was, I told them to pretend it was an AT&T H931.