hi.
i have one phone do not turn on. after run unbrick procedure i can enter in fastboot but i can not enter for flash.
is posible flash it phone in fastboot mode? i need re partition if is posible.
thanks for help.
What problem are you exactly facing and have you tried flashing CWM recovery in fastboot?
Sent from my LG-P765 using Tapatalk
noob.gamer said:
What problem are you exactly facing and have you tried flashing CWM recovery in fastboot?
Sent from my LG-P765 using Tapatalk
Click to expand...
Click to collapse
my problem is that phone fist do not enter in recovery and phone only turn on with android with red triangle and exclamation, i do flash but same. after it i tried to enter en fastboot for wipe. i do it with tool for repair boot. after it i can enter in fastboot but with i do "fastboot -w" phone respond that particion do not exist. i tried to flash recovery but phone do not have unlock boot. my question is if si posible repartition and flash over fastboot? phone do not enter in download mode in it moment.
thank for help.
tictac_m said:
my problem is that phone fist do not enter in recovery and phone only turn on with android with red triangle and exclamation, i do flash but same. after it i tried to enter en fastboot for wipe. i do it with tool for repair boot. after it i can enter in fastboot but with i do "fastboot -w" phone respond that particion do not exist. i tried to flash recovery but phone do not have unlock boot. my question is if si posible repartition and flash over fastboot? phone do not enter in download mode in it moment.
thank for help.
Click to expand...
Click to collapse
Use the emergency restore option in B2C (lgupdate tool). This will bring your phone back to life
Sent from my LG-P760 using xda app-developers app
N00BY0815 said:
Use the emergency restore option in B2C (lgupdate tool). This will bring your phone back to life
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
if all fails try this you may get lucky
http://forum.xda-developers.com/showthread.php?t=2546571
tawhid111 said:
if all fails try this you may get lucky
http://forum.xda-developers.com/showthread.php?t=2546571
Click to expand...
Click to collapse
i need it "lelus script", when i can find it?
thanks.
tictac_m said:
i need it "lelus script", when i can find it?
thanks.
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showthread.php?t=2292828
artit said:
Here http://forum.xda-developers.com/showthread.php?t=2292828
Click to expand...
Click to collapse
thanks. i tried it. i resolver flash with box. i can not flash with b2c. i connect phone and after 3 seconds lose conection. well i flash with box but now i have other problem phone do not turn on complite, show lg after it show android with red triangle, i read that it solution with factory reset (vol down + home + power) but it do not working for me i do it ,but phone do not enter in factory reset only turn off. i tried to wipe for fastboot - do not lucky.
exist other form for do factory reset?
tictac_m said:
thanks. i tried it. i resolver flash with box. i can not flash with b2c. i connect phone and after 3 seconds lose conection. well i flash with box but now i have other problem phone do not turn on complite, show lg after it show android with red triangle, i read that it solution with factory reset (vol down + home + power) but it do not working for me i do it ,but phone do not enter in factory reset only turn off. i tried to wipe for fastboot - do not lucky.
exist other form for do factory reset?
Click to expand...
Click to collapse
You cannot flash u-boot/x-loader because of partition not found error, right? Did you try to enter S/W update mode and use LG support tool to recover your phone as @tawhid111 did?
And what is box?
artit said:
You cannot flash u-boot/x-loader because of partition not found error, right? Did you try to enter S/W update mode and use LG support tool to recover your phone as @tawhid111 did?
And what is box?
Click to expand...
Click to collapse
i used vygis for flash, with it i can write u-boot and x-loader. i can enter in s/w but i do not have why only with vygis, the phone connect port for flash. i flash with version 20f.
Please help I am facing the same problems too but I was able to get the ics uboot and xboot
when I flash a kdz the only thing that happens is that the phone reboots right back to the dead android with red triangle
niggist said:
Please help I am facing the same problems too but I was able to get the ics uboot and xboot
when I flash a kdz the only thing that happens is that the phone reboots right back to the dead android with red triangle
Click to expand...
Click to collapse
you tried to hard reset power + down vol + home. all same time. you can see android with box to side, in it moment you can unprees keys.
tictac_m said:
you tried to hard reset power + down vol + home. all same time. you can see android with box to side, in it moment you can unprees keys.
Click to expand...
Click to collapse
yes, that doesn't work for me
niggist said:
yes, that doesn't work for me
Click to expand...
Click to collapse
you have same problem that me. but i do not have solution.
please any that have solution for it.
Related
Hi guys,
So I bought myself 2x ACHO C908 tablets during my stay in HongKong.
However, only one of them are able to enter recovery mode by holding down Volume- and the poweron button at the same time.
The tablet not being able to proceed just stucks at the first logo of the boot, namely "ACHO".
So my question is if you think this is software or hardware related?
The reason I want to enter recovery mode is because I want to do a factory reset, the tablet not being able to enter recovery mode gives me an error on boot saying I need to do a default settings reset.
Any ideas?
Thanks in advance
nikkop said:
Hi guys,
So I bought myself 2x ACHO C908 tablets during my stay in HongKong.
However, only one of them are able to enter recovery mode by holding down Volume- and the poweron button at the same time.
The tablet not being able to proceed just stucks at the first logo of the boot, namely "ACHO".
So my question is if you think this is software or hardware related?
The reason I want to enter recovery mode is because I want to do a factory reset, the tablet not being able to enter recovery mode gives me an error on boot saying I need to do a default settings reset.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
I would say it depends on the software
Probably there was a error while flashing the recovery image
jiffer1991 said:
I would say it depends on the software
Probably there was a error while flashing the recovery image
Click to expand...
Click to collapse
Hi,
thank you for the guess.
Is there anything I can do to fix this?
Thanks
nikkop said:
Hi,
thank you for the guess.
Is there anything I can do to fix this?
Thanks
Click to expand...
Click to collapse
Sry for my late answer i was away a while
jap u could flash your stock rom via odin or adb just search in the xda forums how this works
if i remmber right in odin there is a optin wich lets u flash only the stock recovery
(you migh also flash a custom recovery like cmw if its available for u tablet)
jiffer1991 said:
Sry for my late answer i was away a while
jap u could flash your stock rom via odin or adb just search in the xda forums how this works
if i remmber right in odin there is a optin wich lets u flash only the stock recovery
(you migh also flash a custom recovery like cmw if its available for u tablet)
Click to expand...
Click to collapse
Thanks for the reply.
I can't use "Odin" because I'm not able to boot into Android? So I can't use it?
And I can't use "ADB" either, because I can't boot into Android so I can't turn on "USB Debugging".
Any other guesses? :/
Thanks
nikkop said:
Thanks for the reply.
I can't use "Odin" because I'm not able to boot into Android? So I can't use it?
And I can't use "ADB" either, because I can't boot into Android so I can't turn on "USB Debugging".
Any other guesses? :/
Thanks
Click to expand...
Click to collapse
sounds tricky...
but try to get into download mode neither you checked the usb debugging cus i think it might also work without
nikkop said:
Hi guys,
So I bought myself 2x ACHO C908 tablets during my stay in HongKong.
However, only one of them are able to enter recovery mode by holding down Volume- and the poweron button at the same time.
The tablet not being able to proceed just stucks at the first logo of the boot, namely "ACHO".
So my question is if you think this is software or hardware related?
The reason I want to enter recovery mode is because I want to do a factory reset, the tablet not being able to enter recovery mode gives me an error on boot saying I need to do a default settings reset.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
Try to visit Acho's Forum page and write to factory dveloper about your proble; it's a chinese forum but with "google translator" you can understand!
http://bbs.acho.com.cn/index.php
Hello everyone! Here is my problem.
The home button of my gs2 is broken. I knew that some rom have the function that rebooting into recovery mode when power on.
But somehow, I need to boot into recovery mode when power off.
In addition, I've got a item which can help me get into odin mode when power off. The item in Chinese we call it "Wa mei shen qi"~
I would like to know is it able for me to boot into recovery mode with this? Or any other possible way for gs2 from power off state.
Thanks!
saedrna said:
Hello everyone! Here is my problem.
The home button of my gs2 is broken. I knew that some rom have the function that rebooting into recovery mode when power on.
But somehow, I need to boot into recovery mode when power off.
In addition, I've got a item which can help me get into odin mode when power off. The item in Chinese we call it "Wa mei shen qi"~
I would like to know is it able for me to boot into recovery mode with this? Or any other possible way for gs2 from power off state.
Thanks!
Click to expand...
Click to collapse
The "Item" you are talking about could be a USB Jig? As you already said: it will take you into download mode but not recovery mode.
I don't know what you mean to say by
But somehow, I need to boot into recovery mode when power off.
Click to expand...
Click to collapse
Can you tell us why?
For a running device with USB debugging enabled you could run adb reboot recovery to boot into recovery mode. However this is for a running device, not for a device that is powered off.
I don't either fully understand what you're meaning by this.
But as far as i know the only way to access CWM when power off is Power+Home+VolUp, but then ofcourse i'm not a pro at this...yet there could be another way to access Recovery while power off which i haven't found out about.
I don't understand also why you must access Recovery while power off, in your situation (with the home butten broken) it would be easier to get ROM Manager. It has an option to reboot into Recovery mode. Or if you rooted with CF-Kernel, it come with a CWM app that let's you choose if you want to reboot normally, reboot into download mode or reboot into Recovery mode.
and if i may ask, what do you mean by Odin mode? Is it download mode?
fxrb said:
The "Item" you are talking about could be a USB Jig? As you already said: it will take you into download mode but not recovery mode.
I don't know what you mean to say by
Can you tell us why?
For a running device with USB debugging enabled you could run adb reboot recovery to boot into recovery mode. However this is for a running device, not for a device that is powered off.
Click to expand...
Click to collapse
Thanks for your informations.
The reason is that I flash a rom in Odin mode, but after that I can't get powered on, it always remains in the starting animation.
I've been in this situation many times, for every time, a wipe data / factory reset in recovery mode will fix the problem. However the problem arises, for this time, my home button is broken.
And I've tried a lot of other roms from Odin mode, it still remains in the starting animation. So I really need a wipe in recovery mode badly.
The "item" may be the same with USB jig from your description.
CashAndPotatoes said:
I don't either fully understand what you're meaning by this.
But as far as i know the only way to access CWM when power off is Power+Home+VolUp, but then ofcourse i'm not a pro at this...yet there could be another way to access Recovery while power off which i haven't found out about.
I don't understand also why you must access Recovery while power off, in your situation (with the home butten broken) it would be easier to get ROM Manager. It has an option to reboot into Recovery mode. Or if you rooted with CF-Kernel, it come with a CWM app that let's you choose if you want to reboot normally, reboot into download mode or reboot into Recovery mode.
and if i may ask, what do you mean by Odin mode? Is it download mode?
Click to expand...
Click to collapse
Yes, for Odin mode, I mean the download mode.
The reason that I need to boot into recovery mode is given in #4. And thanks for your information , but I really need to boot into recovery mode to do a wipe data / factory reset to save my gs2.
boot into recovery/download mode
..so u have a bootloop & ur home-btn is broken..
am i right?
the jig would bring you to dowload mode
install via odin ur rom with repartition..
u will need a 3-parted rom
that should solve your problem..cause i think theres no way to come into the recovery mode if u have a bootloop
[email protected] said:
u can use an app to boot into recovery/download mode
just look at the marketplace which you prefer
- i use stweaks from sieya kernel
the jig would reset the counter and bring you to dowload mode
Click to expand...
Click to collapse
He can't boot, so that is no option for him unfortunately.
I believe adb can be used when the animation starts, haven't checked it. If so, simply do adb reboot recovery.
Sent from my GT-I9100 using Tapatalk 2
probably this posting can help you..
fixing guide
I believe adb can be used when the animation starts, haven't checked it.
Click to expand...
Click to collapse
Yes, adb can be used during boot, but only if USB debugging was enabled before.
Spiralzz said:
He can't boot, so that is no option for him unfortunately.
I believe adb can be used when the animation starts, haven't checked it. If so, simply do adb reboot recovery.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Umm~This may work if adb.exe can get connected with my phone in booting animation. I'll try it later.
You must press on button for a few seconds then click on reboot then take recovery.
Sent from my GT-I9100 using xda app-developers app
you can also use an app called [ Anreboot.apk ] but you must have a root permission ok
Spiralzz said:
He can't boot, so that is no option for him unfortunately.
I believe adb can be used when the animation starts, haven't checked it. If so, simply do adb reboot recovery.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I've tried this with adb tool in andriod development SDK.
However during the booting animation, even if Windows Device Manager detect Android ADB Interface, "adb devices" shows no adb connections.
Maybe the only way for me is finding a rom with auto wipe after flashing it by ODIN.
The only way you can get this fixed is get your phone-home button fixed in a samsung repair center ma8..
There's no other way you can go to recovery mode without the home button use...you can use th usb jig only to go into download mode!. Hope this helps.
saedrna said:
Hello everyone! Here is my problem.
The home button of my gs2 is broken. I knew that some rom have the function that rebooting into recovery mode when power on.
But somehow, I need to boot into recovery mode when power off.
In addition, I've got a item which can help me get into odin mode when power off. The item in Chinese we call it "Wa mei shen qi"~
I would like to know is it able for me to boot into recovery mode with this? Or any other possible way for gs2 from power off state.
Thanks!
Click to expand...
Click to collapse
is u r fone rooted. if yes u can use cwm recovery to boot into recovery mode
Bala_2668 said:
is u r fone rooted. if yes u can use cwm recovery to boot into recovery mode
Click to expand...
Click to collapse
Please read this before posting:
Spiralzz said:
He can't boot, so that is no option for him unfortunately.
I believe adb can be used when the animation starts, haven't checked it. If so, simply do adb reboot recovery.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
He is simply not able to boot the device so how do you expect him to go into recovery with a broken home button?
hello all...i recently tried to downgrade my phone from jellybean to ics with stock recovery mode...
i press *reboot system now* and stuck at SAMSUNG GALAXY S3
tried to press power+vol up+vod down but neither recovery or factory will start
i have big trouble please help...!!!
thanks in advance!
al13nas said:
hello all...i recently tried to downgrade my phone from jellybean to ics with stock recovery mode...
i press *reboot system now* and stuck at SAMSUNG GALAXY S3
tried to press power+vol up+vod down but neither recovery or factory will start
i have big trouble please help...!!!
thanks in advance!
Click to expand...
Click to collapse
but why do you need to downgrade? and why would you downgrade from a "STOCKRECOVERY" ?
sriram231092 said:
but why do you need to downgrade? and why would you downgrade from a "STOCKRECOVERY" ?
Click to expand...
Click to collapse
i had cwm and flash stock again in order to downgrade...i thing ics is better..no other reason
al13nas said:
i had cwm and flash stock again in order to downgrade...i thing ics is better..no other reason
Click to expand...
Click to collapse
don't flash ics once you are using jelly bean! that will lead to SDS(sudden death syndrome). you will murder your phone!
sriram231092 said:
don't flash ics once you are using jelly bean! that will lead to SDS(sudden death syndrome). you will murder your phone!
Click to expand...
Click to collapse
there is anyway to flash jb rom again via my pc...my phone opens but stuck in SAMSUNG GALAXY S3 GT-I9300 screen
or i must buy a new phone?
al13nas said:
there is anyway to flash jb rom again via my pc...my phone opens but stuck in SAMSUNG GALAXY S3 GT-I9300 screen
or i must buy a new phone?
Click to expand...
Click to collapse
flash the latest stock firmware of YOUR REGION from www.sammobile.com. then factory reset from recovery.
sriram231092 said:
flash the latest stock firmware of YOUR REGION from www.sammobile.com. then factory reset from recovery.
Click to expand...
Click to collapse
my question is how to flash...my phone doesnt enter into recovery (power button + vol up +vol down) doesnt work...just stuck in boot logo
i had done a backup and i have the latest stock firmware ...i just need to enter recovery or flash using my pc..
al13nas said:
my question is how to flash...my phone doesnt enter into recovery (power button + vol up +vol down) doesnt work...just stuck in boot logo
i had done a backup and i have the latest stock firmware ...i just need to enter recovery or flash using my pc..
Click to expand...
Click to collapse
recovery mode is home button+volume up+power! you need not enter recovery mode to flash firmware via odin! you need to enter download mode(home button+volume down+power) and connect to pc and flash via odin! after flashing is done, enter recovery mode and factory reset!
sriram231092 said:
recovery mode is home button+volume up+power! you need not enter recovery mode to flash firmware via odin! you need to enter download mode(home button+volume down+power) and connect to pc and flash via odin! after flashing is done, enter recovery mode and factory reset!
Click to expand...
Click to collapse
cant enter download mode..just this screen...and my pc dont recognize my phone so as odin...really sorry for all this..
im desperate with my phone!!
No download mode then you can try as a last resort a USB Recovery Jig to access download mode .
Otherwise its a service centre .
al13nas said:
cant enter download mode..just this screen...and my pc dont recognize my phone so as odin...really sorry for all this..
im desperate with my phone!!
Click to expand...
Click to collapse
yeah! no download mode! follow the above suggestion!
sriram231092 said:
yeah! no download mode! follow the above suggestion!
Click to expand...
Click to collapse
i contact with service center i think this is the only solution..however my phone is rooted so i think they will not fix it
al13nas said:
cant enter download mode..just this screen...and my pc dont recognize my phone so as odin...really sorry for all this..
im desperate with my phone!!
Click to expand...
Click to collapse
Pull out battery.
Wait 10 sec.
Insert Battery
Hold Vol down + power+home at same time.
When in download mode press Vol up again
Now connect phone to ODIN... if you know what Odin is
Yesterday I copied one build.prop and forgot to apply chmod 777 ..., and restarted the phone.
Could enter the cwm or recovery method to correct ... but my volume buttons do not work.
My computer does not recognize the phone, (reconhecece caaso would use adb reboot recovery)
so what to do?
thyagotopan said:
Yesterday I copied one build.prop and forgot to apply chmod 777 ..., and restarted the phone.
Could enter the cwm or recovery method to correct ... but my volume buttons do not work.
My computer does not recognize the phone, (reconhecece caaso would use adb reboot recovery)
so what to do?
Click to expand...
Click to collapse
If your volume buttons don't work, only solution is to flash .kdz for your phone model.
phone whas not found
maxx_hr said:
If your volume buttons don't work, only solution is to flash .kdz for your phone model.
Click to expand...
Click to collapse
phone whas not found
the player is not recognized ...
or the emergency mode, diag or CS emergency. in 3GQCT
:crying:
Did you perform right procedure to enter recovery mode?
Get the battery out from device. Hold volume- button and connect usb cable (with PC). You must see yellow screen with Emergecy...
Sent from my LG-P710 using XDA Free mobile app
Problem in hardware
maxx_hr said:
Did you perform right procedure to enter recovery mode?
Get the battery out from device. Hold volume- button and connect usb cable (with PC). You must see yellow screen with Emergecy...
Sent from my LG-P710 using XDA Free mobile app
Click to expand...
Click to collapse
The volume problem is with the hardware, I believe that should be a flat cable.
thyagotopan said:
The volume problem is with the hardware, I believe that should be a flat cable.
Click to expand...
Click to collapse
So you can reach Emergency?
If yes, flash one of my kdz's with TWRP, so you dont need volume buttons in recovery. TWRP is fully touch.
maxx_hr said:
So you can reach Emergency?
If yes, flash one of my kdz's with TWRP, so you dont need volume buttons in recovery. TWRP is fully touch.
Click to expand...
Click to collapse
I already have TWRP installed, the problem is I can not get to it.
unless there is some form of access with the adb debug mode off and the cell phone off ...
Fastboot also work.
thyagotopan said:
I already have TWRP installed, the problem is I can not get to it.
unless there is some form of access with the adb debug mode off and the cell phone off ...
Fastboot also work.
Click to expand...
Click to collapse
Your phone is unavailable to boot?
Good day lads! anyone help me recover my phone. Im stucked in boot logo.
I have rooted my lg g2 mini with kingroot and install superSU me and want to change the with superSU from the kingrootSU then i I misclicked and something then my phone goes to a recovery mode with nothing was written. then after that I restarted my phone and them I'm stuck in boot logo after that. I hope this is just a softbrick
aljandigabonskie said:
Good day lads! anyone help me recover my phone. Im stucked in boot logo.
I have rooted my lg g2 mini with kingroot and install superSU me and want to change the with superSU from the kingrootSU then i I misclicked and something then my phone goes to a recovery mode with nothing was written. then after that I restarted my phone and them I'm stuck in boot logo after that. I hope this is just a softbrick
Click to expand...
Click to collapse
can you enter download mode ?
if you can just flash kdz with a normal way or if you don't have any data to loose with CSE way
Don't worry, it's a soft brick.
Get the phone in download mode and flash a kdz for your device.
You may have to do a factory reset, but don't until you have to.
Vagelis1608 said:
Don't worry, it's a soft brick.
Get the phone in download mode and flash a kdz for your device.
You may have to do a factory reset, but don't until you have to.
Click to expand...
Click to collapse
how do u go download mode? I'm sorry but Im just new to LG.
aljandigabonskie said:
how do u go download mode? I'm sorry but Im just new to LG.
Click to expand...
Click to collapse
Plug a USB to a PC with LG 's drivers installed, hold Vol- on your device and plug the other end of the USB cable to your device.
(That's probably it, I can't remember for sure. If it's not, then Google it)
Vagelis1608 said:
Plug a USB to a PC with LG 's drivers installed, hold Vol- on your device and plug the other end of the USB cable to your device.
(That's probably it, I can't remember for sure. If it's not, then Google it)
Click to expand...
Click to collapse
I'll try this tomorrow Im downloading the files now. Thansk by the way!
Vagelis1608 said:
Plug a USB to a PC with LG 's drivers installed, hold Vol- on your device and plug the other end of the USB cable to your device.
(That's probably it, I can't remember for sure. If it's not, then Google it)
Click to expand...
Click to collapse
keep holding Vol+ and plug usb
numpea said:
keep holding Vol+ and plug usb
Click to expand...
Click to collapse
umm when i do this my phone just charged. i cant enter download mode.
numpea said:
can you enter download mode ?
if you can just flash kdz with a normal way or if you don't have any data to loose with CSE way
Click to expand...
Click to collapse
I've been flashing my LG G2 MINI (D620K) since last month and the problem doesn't seem to go away. I flashed, it works for a few weeks but then my phone just reset itself and the logo stucks again. I was hoping that you happen to know a solution