Related
this is a long story, so bear with me, please:
i used to be on JPKH1 (this was the rom that came out of the box)
i was on XXKI3 when i decided to flash nightly #116 of CM7. i followed the instructions, got it working and had no real issues. however, i felt like CM7 made my phone old-ish (loved it otherwise), so i decided to return to a custom rom. prior to all this, i was on VillainROM 3.0
i flashed XWKJ3, business as usual, and then Batista70 rom. when i did that, something...strange, happened. none of the system functions worked (SNS sync, android system ringtones, etc.). i was overall dissatisfied with it, so i switched to Omega rom 6 XT.
i did that, and installed the relevant version of ICS domination theme by vertumus, and that's when it first happened - both the camera AND android system ringtones were force closing. also, when a system notification came on the unfortunate moment my phone was asleep, there would be a moving pixel on the screen and nothing else until i woke the phone up. nothing i did would fix it, and believe me, i tried EVERYTHING (restore nandroid, fix permissions, reflash rom). at last, i factory reset it, which did the trick but took some of the 'omega' out of 'omega rom'
i flashed stock XWKJ3, factory reset, flashed Omega 7 XT, and the problem persisted. it starts whenever i reboot the phone, for any reason, even if it doesn't change anything on the phone (just a simple power on/power off)
now i was pissed, and went back KI3 and VillainRom 3 and all SEEMED good. there were VRTweaks i wanted to use, but the above DID happen, after all. i rebooted into CWM recovery, took a nandroid, booted up again and sure enough, 'it' happened AGAIN!!!
this has me driving myself crazy, and no one on the Omega thread seems to believe in the existence of my post there (that's how well they're ignoring it). WHAT SHOULD I DO?!!!
by the way, i have NEVER flashed a .PIT file (since i've read in so many places not to touch that thing on the S2) and my binary counter is at a service-center-scaring 7. and for the love of god, don't just read this and go away (that's happened to me before), GIVE ME A HAND!!!
Stock rom via odin, and reroot.
Sent from HydrOG3N MOD S2.
Technology Evolves, Android Evolves.
HydrOG3N is THE Revolution.
tried that already
flashed KJ3, then omega 6
flashed KJ3, then omega 6
flashed KJ3, then omega 7
flashed KI3, then villainrom 3.0
or were you implying something else?
Try wiping dalvik/partition/cache before and after installing the custom ROM
I do that out of habit when installing custom roms, as in the above cases
Sent from my GT-I9100 using Tapatalk
Have you tried fixing permissions? Might be worth a try
Sent from my GT-I9100 using Tapatalk
the pixel on the screen is because of app called noLED or something like that just uninstall it like any other apk and your that problem will be solved it automatically installs when you flash OMEGA ROM
@thefaixy: well, solved i guess
@macdam: nope
Sent from my GT-I9100 using Tapatalk
Random but I had an issue on my phone that followed me through different ROMs and kernels like some sort of ghost.
Turned out to be a corrupted video file in my ext SD card which was basically crashing the phone constantly and causing all sorts of strange issues.
Sent from my Optimus 2X using Tapatalk
thanks for the suggestion, mungulz, but i suppose we don't have the same problem. i went through all my internal AND external data and saw nothing out of the ordinary
on that note, introducing another twist in this ridiculous predicament, NO app (and with the exception of root explorer, NO app) can see my songs (external sd). if i use root explorer to force an app to use it, the app force closes
and just a thought, but i keep fixating on the .PIT file. your thoughts?
Have you done a full wipe including user data? Might be something left over that us causing issues, take a titanium backup first though
Sent from my GT-I9100 using xda premium
if you mean the CWM one, then yes, plenty of times. basically, each time i flashed something on the phone in this period, i factory reset. if i do it now, that will temporarily solve the problem and i'm pretty sure of it. one reboot later, i'll be back in hot water
i'm aware, of course, that there are other ways of factory resetting...
1) Flash Stock KI3, with pit file and re-partition
2) Back up everything including the int. SD to my PC.
3) press *2767*3855# it will completely wipe your device.
4) Once phone reboots, place custom rom and pictures + titanium backup onto the int. SD
5) Flash a custom Kernel
6) Reboot recovery, wipe data, wipe system, Flash Rom.
7) Reboot and restore the DATA only
or without pit file and uncheck re-partition
i had to go for tuition, so i couldn't do all the things gasmias said; just factory reset with *2767*3855# and then restored the apps ONLY with TB. and...my phone is back!
huge thanks to all of you for trying to help (lol, too many thanks buttons to press) . i guess it was just corrupt left overs. but dammit, now i'm scared of putting VRTweaks back in . eh, i'll take a nandroid back up
in light of these events, anything i should keep in mind for my future flashing endeavors?
I have been using Omega rom for many months however recently the phone started to lag very bad, so I tried updating it to the latest update of Omega,however there was no improvement even after a clean fresh install.
So I decided to go back to a stock rom not realising I needed certain functions that only a custom rom provides.
However ever since the loading of the stock rom and re-rooting the phone, every custom rom I have tried, Omega and Sensation, after start up when installing the rom, within 5min the phone just crashes and I cannot do anything unless I take the battery out.
Why would this crashing keep occuring and what could I do to resolve this issue?
Just tried tried flashing Sensation again and installed fine but within 2mins of completing the install, it crashed and I had to take out the battery and reinsert to finish my first time setup, which this time completed.
I then allowed the phone to reload apps trhough google play and within 5mins of installing it again crashed although the charging icon is moving but I cannot select anything on the screen...
mobad said:
I have been using Omega rom for many months however recently the phone started to lag very bad, so I tried updating it to the latest update of Omega,however there was no improvement even after a clean fresh install.
So I decided to go back to a stock rom not realising I needed certain functions that only a custom rom provides.
However ever since the loading of the stock rom and re-rooting the phone, every custom rom I have tried, Omega and Sensation, after start up when installing the rom, within 5min the phone just crashes and I cannot do anything unless I take the battery out.
Why would this crashing keep occuring and what could I do to resolve this issue?
Click to expand...
Click to collapse
did you try full wiping ur s3 and then reinstall omega
Sent from my Supercharged V12 Samsung Galaxy S3 using Tapatalk
When you say full wipe, do you mean through CWM?
I did wipe data, wipe cache, wipe dalvik.
Installed rom will full wipe selected.
After installing, wipe data and cache again.
Still crashing...
Omega problem ask in the Omega thread makes a lot more sense .
jje
I had the same issue with Android Revolution.
Since reverting to stock rom, things seem fine now...
mobad said:
I had the same issue with Android Revolution.
Since reverting to stock rom, things seem fine now...
Click to expand...
Click to collapse
user error or faulty download .
jje
So the other day my S3 gave up the ghost, and developed the hard-brick "QHSUSB_DLOAD" error. I have insurance so I was overnighted a new phone, and am sending the old one away. I believe this was related to a long-term power button issue I was having, perhaps a virus, or something. I had not changed anything to the ROM I was using since about October, and the issue just happened now in May.
At any rate, the new S3 I received is an MJB version, Android 4.3, Knox and all that other good stuff. After several failed attempts, I found a method to root this phone and disable Knox. The Warranty Bit is already tripped, so clearly I'm not sending this phone back until it hard bricks as well. I am trying to install the StockMOD ROM that is very popular, however I am being plagued by problem after problem.
I was able to flash a version of CWM Recovery onto my phone, but it was too old and couldn't mount any of the folders. Using ROM Manager, I was able to flash an update to my Recovery, and now it mounts and views all folders properly. However, when I go to install the StockMOD ROM, I continuously get a Status 7 error, something about "expects 5 args, got 3." I wiped the data, cache, and Dalvik, but kept getting this error. So, I had to recover my backup of stock, which didn't go well either. Once my backup was installed, all of my apps kept crashing. Gapps, ROM Manager, everything kept giving me constant FC errors. I had to wipe my data, cache, and Dalvik again and go back to factory default, and reinitialize the phone. Luckily I haven't installed anything of importance on here yet.
A quick search through here states that I need to use TWRP as my Recovery. I've flashed TWRP several times, first using the 2.6... version and then the most recent 2.7.0.0 version, and neither of these will mount any of my folders. It just gives me a litany of errors trying to mount the various locations. I've done Fix Permissions and everything else, TWRP will just NOT mount anything. Other folks say I need the latest PhilZ Recovery. I've downloaded the latest PhilZ Touch 6 and flashed it via Odin. It is giving me the same errors as regular CWM, Status 7, "expecting 5 args, got 3."
I don't know what else to do. My S3 that ran Android 4.0 was so much easier. I had that thing rooted and running a TW based ROM with Nova launcher in about 30 minutes. This phone has been a disaster since I turned it on. I'm just trying to get a 4.3 TW based ROM. I like the Samsung Camera, Calendar, Clock, Messaging, and Contacts apps far better than AOSP versions. But I also want much more customization to my notification drawer toggles. Stock TW doesn't have the toggles I use frequently like the data toggle as well as the torch toggle.
I don't know what I'm doing wrong, because unlike a lot of folks out there, once I find a ROM I like, I stick with it. I'm not constantly updating, changing, or searching for the newest version of Android. There's nothing wrong with that, it just isn't my cup of tea. So does anyone know what I need to do? At this point, I'm about to just give up and use Nova over top of rooted stock TW and call it a day.
Thanks!
Have you tried to go back stock rom using Odin ? I think it might resolve your recovery problem
nosphor said:
Have you tried to go back stock rom using Odin ? I think it might resolve your recovery problem
Click to expand...
Click to collapse
Everything is stock except the recovery. I'm using CWM 6.0.4.7 with PhilZ Touch 6. I'm still using the stock TW 4.3 ROM that shipped with the phone. The only exception is that I'm rooted now.
I suggest you to go back to a 4.1 official stock rom with odin to be sure to have no more issue.
This can help you : http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Also, don't forget to backup your apps with titanium backup and all your sms :good:
nosphor said:
I suggest you to go back to a 4.1 official stock rom with odin to be sure to have no more issue.
This can help you : http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Also, don't forget to backup your apps with titanium backup and all your sms :good:
Click to expand...
Click to collapse
Unfortunately, I've heard that it is not possible to revert to anything prior to 4.3 once a phone comes factory installed with 4.3, due to all of the security enhancements and etc. My kernel, modem, and baseband are all factory stock 4.3 MJB. Everyone else on the boards, under various other topics, warn of immediate and sudden death to the phone if you attempt to install a baseband prior to 4.3 MJB.
I'm very surprised to hear that, because recently i've flash stock 4.3 rom and then go back to 4.1.2 to flash a 4.4 rom without any issue and i've got nothing for issues.
Maybe it depends on which country you are ( i'm from France ) ? For what i know , there is a VERY little chance that this downgrade cause dammage to your phone
nosphor said:
I'm very surprised to hear that, because recently i've flash stock 4.3 rom and then go back to 4.1.2 to flash a 4.4 rom without any issue and i've got nothing for issues.
Maybe it depends on which country you are ( i'm from France ) ? For what i know , there is a VERY little chance that this downgrade cause dammage to your phone
Click to expand...
Click to collapse
I'm in the USA. The security features on the I747 US version are far different. I don't know how everyone else is succeeding. I am completely lost.
You are in the wrong forum, anything you try from here will hard brick your phone.
Sent from my GT-I9300 using Tapatalk
Sorry to tell you that, but what you say is not completely true.
Yes, there is a lot of people that rush to give an answer to the question, but there is also people that really like to help people that are in trouble :good:
Please, don't take most of the case for a generality
http://forum.xda-developers.com/showthread.php?t=1756338
Sent from my GT-I9300 using Tapatalk
Yes, i've read this, i know that, that's why i talk about the difference between country, different phone model
My apologies. Thought this was the 747 board. Go ahead and lock this, I'll repost in the correct forum.
Tried TWRP?
Longtime XDA'er here with a problem.
I was rooted on stock 4.1.2 for over a year but wanted to update to take advantage of newer features such as chromecast mirror on kitkat. I had a perfectly working phone until I tried flashing updates. I followed instructions and only flashed the MJ9 baseband on roms that tell me too, and even flashed ND7 baseband for other ports. I was able to install multiple variants of 4.4.2 with both twrp and philz recoveries with the same result. I can't get sms/mms to come in. What's weird is upon bootup I will get the same test message only once, then nothing. I even tried flashing agni kernel with no luck. The phone works great with the exception of text messaging. Calls work, GPS locks, and no issues with wifi. APN settings look fine (compared to my wife's note 2 which is identical model still on 4.1.2). I popped my sim into an LG lucid I had as a backup and the text's sitting in limbo start streaming in, so I know my sim isn't bad. I even made sure to disable hangouts with no luck. Even tried Go Sms Pro with same result. I have since decided to go to 4.3 and am having the same issue on those roms on the MJ9 baseband and MJ9 stock kernel.
I'm pulling my hair out because I can't figure this out and I'm a pretty smart fella, this just has me stumped.
Ideas anyone? I have been researching like mad and nothing I try seems to resolve.
Thanks in advance!
timber03 said:
Longtime XDA'er here with a problem.
I was rooted on stock 4.1.2 for over a year but wanted to update to take advantage of newer features such as chromecast mirror on kitkat. I had a perfectly working phone until I tried flashing updates. I followed instructions and only flashed the MJ9 baseband on roms that tell me too, and even flashed ND7 baseband for other ports. I was able to install multiple variants of 4.4.2 with both twrp and philz recoveries with the same result. I can't get sms/mms to come in. What's weird is upon bootup I will get the same test message only once, then nothing. I even tried flashing agni kernel with no luck. The phone works great with the exception of text messaging. Calls work, GPS locks, and no issues with wifi. APN settings look fine (compared to my wife's note 2 which is identical model still on 4.1.2). I popped my sim into an LG lucid I had as a backup and the text's sitting in limbo start streaming in, so I know my sim isn't bad. I even made sure to disable hangouts with no luck. Even tried Go Sms Pro with same result. I have since decided to go to 4.3 and am having the same issue on those roms on the MJ9 baseband and MJ9 stock kernel.
I'm pulling my hair out because I can't figure this out and I'm a pretty smart fella, this just has me stumped.
Ideas anyone? I have been researching like mad and nothing I try seems to resolve.
Thanks in advance!
Click to expand...
Click to collapse
Odin back to stock should fix this issue.
DreamFX said:
Odin back to stock should fix this issue.
Click to expand...
Click to collapse
flashing stock 4.1.2 via Odin does fix it, but when I try to upgrade to any rom from there I have same problem. Pretty much all of the roms 4.3+ specify flashing with MJ9 firmware, which I have done. I have tried 4 roms today and same problem every time.
So annoying, it's like I can't get higher than 4.1.2
timber03 said:
flashing stock 4.1.2 via Odin does fix it, but when I try to upgrade to any rom from there I have same problem. Pretty much all of the roms 4.3+ specify flashing with MJ9 firmware, which I have done. I have tried 4 roms today and same problem every time.
So annoying, it's like I can't get higher than 4.1.2
Click to expand...
Click to collapse
I'm really surprised I'm the only one having this issue. After much research and countless attempts, it seems the most I can do is run stock 4.1.2 rooted, and can apply the MJ9 firmware... but if I try to update to any rom 4.3 or above, my text messaging stops working, otherwise the ROM's work great and phone calls, 4G Data, Wifi, GPS, etc all work perfect... only the sms/mms doesn't.
If I run the stock, rooted 4.1.2, with MJ9 radio everything runs great, including sms/mms, so my feeling is that I need a rom that doesn't flash kernel, or baseband, but jsut system, data, etc... then I might have a shot but it's a long shot at this point. I have even tried beans build 26 which is 4.3 and have EXACTLY the same problem.
The only other thing I've noticed is I have hardware version I605.07 whereas most people it seems have I605.06 from what I've noticed while browsing similar threads.
got it working with no help from anyone... a lot of steps but worth it. Definitely not the normal path everyone has been posting.
timber03 said:
got it working with no help from anyone... a lot of steps but worth it. Definitely not the normal path everyone has been posting.
Click to expand...
Click to collapse
Timber any chance you would be ale to point me to the fix? This has been driving me nuts
sugarfunk said:
Timber any chance you would be ale to point me to the fix? This has been driving me nuts
Click to expand...
Click to collapse
Absolutely... I will type up instructions in the morning. As for driving you nuts I know exactly what you mean... I was pulling my hair out and almost gave up hope but I tried something and it worked. It involves using beans 26 rom and a combination of Twrp and Philz recoveries and backup/restores... if you are having this problem, the main problem is the flashing of the MJ9 firmware.
I'll clue you in tomorrow
sugarfunk said:
Timber any chance you would be ale to point me to the fix? This has been driving me nuts
Click to expand...
Click to collapse
as promised, here's the steps it took for me to get working... It may seem a little bit of a long process but almost 4 days now and no more issues, so I trust this process. It must be something different in my hardware versus other, and I'm assuming yours is like mine.
Let me know if you have any questions
Start with 4.1.2 stock rooted
1. Install latest TWRP Recovery v2.7
2. Backup EFS and Modem as separate backups to your external SD card
3. In Recovery, Wipe.. Advanced Wipe and wipe everything (including Internal Storage) except external SD and USB-TG partitions
The next set of steps is to ensure you have a clean base to work with...
4. Reboot to download mode and using Odin 3.07 flash stock 4.1.2 firmware
in Pit select Sch-i605-16gb.pit
in PDA, select the stock 4.1.2 MC3 firmware
make sure only the following checkboxes are selected: "Auto Reboot", "Re-Partition" and "F. Reset Time"
Hit Start, wait till process completes and boots into o/s. Then skip all wizard options to get to home screen.
5. Root phone using casual
I had no issues using version "NoYouVerizon-GalaxyNote2-CASUAL R515.jar"
6. After root is successful, boot to Recovery and install latest TWRP recovery again since you will have twrp v2.5 due to the root process
7. Repeat step #3 (3 times to make sure everything is wiped clean)
8. IMPORTANT as this is what seemingly fixed the sms issue for me: using twrp recovery, restore the EFS backup you took in step #2 (do not restore the modem)
9. Install Beans 26 rom (Alliance 4.3) which will now give you a proper MJ9 base and kernel to work with. Again, skip all wizard prompts after it loads just so you can get to home screen.
10. Boot into recovery and now backup the new 4.3 EFS and modem partitions to your external SD.
You are not actually going to need the modem backup for the next steps, but if you have a problem installing a rom,
you now have working MJ9 EFS and Modem partitions should you have a problem with any roms from this point forward
11. Repeat step 7 & 8 (restore only the EFS 4.3 partition)
12. Important.. Now install latest Philz recovery
13. Install 4.4.2 rom using Philz recovery
At step 13 is where I installed the Ditto Note 3 rom v5.2, and chose "do not wipe" during the aroma install process.
14. once installed allow it to reboot, if it hangs on samsung boot animation for more than 5 minutes do the following:
a) pull battery and boot into philz recovery, then wipe only the following: Data, Cache, and dalvik cache
b)Install Agni Kernel (PSN_AGNi_pureSTOCK-v4.2.5_I605_4.4.2_AROMA-signed.zip)
c)reboot and you should get the android wizard for the rom in 2 or 3 minutes
If you have a problem like I did with regards to the Camera not working in the new rom, dirty flash the rom again (do not do any wiping)
Then re-install Agni Kernel since the rom installs it's own, otherwise it will break wifi, at least it did on mine.
There are a few more fixes to get tethering, etc working but I can provide those steps if needed. It basically involves installing xposed framework and the moto-x module.
timber03 said:
as promised, here's the steps it took for me to get working... It may seem a little bit of a long process but almost 4 days now and no more issues, so I trust this process. It must be something different in my hardware versus other, and I'm assuming yours is like mine.
Let me know if you have any questions
Start with 4.1.2 stock rooted
1. Install latest TWRP Recovery v2.7
2. Backup EFS and Modem as separate backups to your external SD card
3. In Recovery, Wipe.. Advanced Wipe and wipe everything (including Internal Storage) except external SD and USB-TG partitions
The next set of steps is to ensure you have a clean base to work with...
4. Reboot to download mode and using Odin 3.07 flash stock 4.1.2 firmware
in Pit select Sch-i605-16gb.pit
in PDA, select the stock 4.1.2 MC3 firmware
make sure only the following checkboxes are selected: "Auto Reboot", "Re-Partition" and "F. Reset Time"
Hit Start, wait till process completes and boots into o/s. Then skip all wizard options to get to home screen.
5. Root phone using casual
I had no issues using version "NoYouVerizon-GalaxyNote2-CASUAL R515.jar"
6. After root is successful, boot to Recovery and install latest TWRP recovery again since you will have twrp v2.5 due to the root process
7. Repeat step #3 (3 times to make sure everything is wiped clean)
8. IMPORTANT as this is what seemingly fixed the sms issue for me: using twrp recovery, restore the EFS backup you took in step #2 (do not restore the modem)
9. Install Beans 26 rom (Alliance 4.3) which will now give you a proper MJ9 base and kernel to work with. Again, skip all wizard prompts after it loads just so you can get to home screen.
10. Boot into recovery and now backup the new 4.3 EFS and modem partitions to your external SD.
You are not actually going to need the modem backup for the next steps, but if you have a problem installing a rom,
you now have working MJ9 EFS and Modem partitions should you have a problem with any roms from this point forward
11. Repeat step 7 & 8 (restore only the EFS 4.3 partition)
12. Important.. Now install latest Philz recovery
13. Install 4.4.2 rom using Philz recovery
At step 13 is where I installed the Ditto Note 3 rom v5.2, and chose "do not wipe" during the aroma install process.
14. once installed allow it to reboot, if it hangs on samsung boot animation for more than 5 minutes do the following:
a) pull battery and boot into philz recovery, then wipe only the following: Data, Cache, and dalvik cache
b)Install Agni Kernel (PSN_AGNi_pureSTOCK-v4.2.5_I605_4.4.2_AROMA-signed.zip)
c)reboot and you should get the android wizard for the rom in 2 or 3 minutes
If you have a problem like I did with regards to the Camera not working in the new rom, dirty flash the rom again (do not do any wiping)
Then re-install Agni Kernel since the rom installs it's own, otherwise it will break wifi, at least it did on mine.
There are a few more fixes to get tethering, etc working but I can provide those steps if needed. It basically involves installing xposed framework and the moto-x module.
Click to expand...
Click to collapse
Whatever works for you. Glad your back up and running.
I have been running various flavors of AOKP ROM's on SG3's for several years now. I recently obtained a refurb S3 and set it up to do the usual.
It came with stock TW 4.4.
Using ROM Manager I installed CWM and made an image of the stock phone. I then installed my AOKP variant and loaded my apps, blah blah. All is good.
I've since decided I want to revert back to TW for awhile. I restored my nandroid and I get the interminable GAPPS failure messages. I have on occasion been able to get it to calm down and have a working phone, usually be uninstalling play app and clearing framework services cache. This is extraordinarily painful and doesn't always work. I've done all the usual, reinstall GAPPS, etc., and basically it is a MAJOR headache just trying to get the image to function.
But....When it does work the phone does not see my SIM card, IMEI, nothing.. I have no mobile connectivity. Restoring the AOKP nandroid brings me back to a fully functioning phone.
So my questions are:
Can anyone explain to me why the TW nandroid is giving all these GAPPS issues and how to circumvent/fix it?
Why is the system seeming to lose my IMEI/SIM info? Is there a way to fix that? Should I have done something different in my setup/nandroid creation?
Lastly - I don't quite understand how CWM works. There is a recovery image. When I do factory reset, is it resetting to this recovery image as opposed to the factory TW? I seem to think so, when I do a reset I see the android version is not what my factory one is.
Thanks all.