Hello all, longtime reader first time poster. I've got the Galaxy Player 4.0 (YP-G1US), and I'm in a "bootloop" situation similar to the others I've seen around here. It seems that the device can't mount the /data partition (mmcblk0p2), and I've tried flashing the stock ROM using Odin in Windoze, Heimdall in both Windoze and Ubuntu 12.04 and 12.10 (not that that I expected a difference) and Terra Silent ROM as well. I flashed using the files from zaclimon's post (http://forum.xda-developers.com/showthread.php?t=1531850), using the pit (with repartition), param, cache, dbdata, factoryfs and zImage. None of that worked, so, I've resigned myself to the fact that my internal memory must have been damaged.
I stumbled on this post http://forum.xda-developers.com/showthread.php?t=1861294 to try to format my external SD as the /data partition. I realize this isn't for the YP-G1US, but I thought I would try anyway (and the first steps should be agnostic of device.) I made two partitions, one in vfat, the other in ReiserFS, flashed stock ROM using all the files I mentioned above, but still got the bootloop. To monitor the situation, I installed google's SDK tools, but can't get ADB to work with my device. When I am in recovery mode for Terra Silent ROM, I am in USB debugging mode automatically, but ADB shows that my device is offline (specifically, the command 'adb devices' returns '????????? offline' ) I understand this is because my device can't authenticate the RSA key from my computer, which would be a handy feature if my device actually worked (you know, to prevent someone from taking my information.) But, since my device won't boot and I've wiped out all the data it had, this is an unnecessary annoyance that prevents me from diagnosing my problem.
Here are my questions:
1.) Do you know how to restore my device to some sort of working order (which most likely involves mounting the external SD as the internal SD in some manner.)
2.) If you don't know how to do 1.), could you at least tell me how to get ADB to recognize my device so I can figure out what my problem is? Maybe some method of moving the RSA key from my computer to the device, or some other way to run ADB on a device that can boot to recovery or download but not all the way so that I can transfer the key normally?
Thanks very much,
Eric
ewgrashorn said:
Hello all, longtime reader first time poster. I've got the Galaxy Player 4.0 (YP-G1US), and I'm in a "bootloop" situation similar to the others I've seen around here. It seems that the device can't mount the /data partition (mmcblk0p2), and I've tried flashing the stock ROM using Odin in Windoze, Heimdall in both Windoze and Ubuntu 12.04 and 12.10 (not that that I expected a difference) and Terra Silent ROM as well. I flashed using the files from zaclimon's post (http://forum.xda-developers.com/showthread.php?t=1531850), using the pit (with repartition), param, cache, dbdata, factoryfs and zImage. None of that worked, so, I've resigned myself to the fact that my internal memory must have been damaged.
I stumbled on this post http://forum.xda-developers.com/showthread.php?t=1861294 to try to format my external SD as the /data partition. I realize this isn't for the YP-G1US, but I thought I would try anyway (and the first steps should be agnostic of device.) I made two partitions, one in vfat, the other in ReiserFS, flashed stock ROM using all the files I mentioned above, but still got the bootloop. To monitor the situation, I installed google's SDK tools, but can't get ADB to work with my device. When I am in recovery mode for Terra Silent ROM, I am in USB debugging mode automatically, but ADB shows that my device is offline (specifically, the command 'adb devices' returns '????????? offline' ) I understand this is because my device can't authenticate the RSA key from my computer, which would be a handy feature if my device actually worked (you know, to prevent someone from taking my information.) But, since my device won't boot and I've wiped out all the data it had, this is an unnecessary annoyance that prevents me from diagnosing my problem.
Here are my questions:
1.) Do you know how to restore my device to some sort of working order (which most likely involves mounting the external SD as the internal SD in some manner.)
2.) If you don't know how to do 1.), could you at least tell me how to get ADB to recognize my device so I can figure out what my problem is? Maybe some method of moving the RSA key from my computer to the device, or some other way to run ADB on a device that can boot to recovery or download but not all the way so that I can transfer the key normally?
Thanks very much,
Eric
Click to expand...
Click to collapse
Are you using adb on Ubuntu? You have to run adb start-server as root.
Mevordel said:
Are you using adb on Ubuntu? You have to run adb start-server as root.
Click to expand...
Click to collapse
I am (technically Kubuntu, 12.10), but whether or not you need to be root to use adb depends on where you installed it. At any rate, if it were a root user priviliges issue, I'd be seeing "?????????? No Permissions". I did run adb as root, just to be sure, and got the same response as described in the original post.
I know that the issue is the RSA key authentication (whitelist) "feature" that google introduced with more recent versions of adb, which is fine if you can actually boot your device and click "yes" on the popup that asks to verify that you want the connected computer to access your device. The problem I have has arisen because I can't boot normally (I can only get to recovery) and so can't authorize my computer to connect to my Galaxy player (and so can't transfer the RSA key from my computer to my Galaxy.) So again, I ask, is there a workaround?
Thanks,
eric
ewgrashorn said:
I am (technically Kubuntu, 12.10), but whether or not you need to be root to use adb depends on where you installed it. At any rate, if it were a root user priviliges issue, I'd be seeing "?????????? No Permissions". I did run adb as root, just to be sure, and got the same response as described in the original post.
I know that the issue is the RSA key authentication (whitelist) "feature" that google introduced with more recent versions of adb, which is fine if you can actually boot your device and click "yes" on the popup that asks to verify that you want the connected computer to access your device. The problem I have has arisen because I can't boot normally (I can only get to recovery) and so can't authorize my computer to connect to my Galaxy player (and so can't transfer the RSA key from my computer to my Galaxy.) So again, I ask, is there a workaround?
Thanks,
eric
Click to expand...
Click to collapse
The build property ro.adb.secure=0 will override that. You can try putting it in build.prop, but if it doesn't work, you'll have to put it in /default.prop, which requires modifying the kernel ramdisk. While you're at it, ro.secure=0 will give you an automatic root shell.
Related
I recently rooted my Eris and I'm unable to flash a custom recovery because I can't get the USB drivers to update with those found in the SDK files. When I try to update the drivers Windows tells me that I have the most up to date drivers installed. It's because of this I cannot see my phone in the command prompt and can't get the custom recovery to work.
Has anyone tried putting the recovery files on their SD and using a terminal emulator?
Any ideas on updating the USB drivers?
If I flashed a custom Rom (as risky as that is without a recovery) could I then use nandroid or some other recovery? Or would I still need to use SDK?
joshw0000 said:
I recently rooted my Eris and I'm unable to flash a custom recovery because I can't get the USB drivers to update with those found in the SDK files. When I try to update the drivers Windows tells me that I have the most up to date drivers installed. It's because of this I cannot see my phone in the command prompt and can't get the custom recovery to work.
Has anyone tried putting the recovery files on their SD and using a terminal emulator?
Any ideas on updating the USB drivers?
If I flashed a custom Rom (as risky as that is without a recovery) could I then use nandroid or some other recovery? Or would I still need to use SDK?
Click to expand...
Click to collapse
download htc sync that should fix ur problem , it did for me
Yes HTC sync updated mine as soon as your phone is acknowledged by HTC sync it should update your usb drivers
FYI HTC sync did NOT work for me on Windows 7. I had to do some pretty annoying stuff to stop windows from installing the regular drivers automatically. If HTC sync doesn't work I can try to help.
If HTC Sync doesn't help, try the following steps.
1. Unplug your Eris from the PC
2. Open Device Manager and delete the Android device
3. Reboot your PC
4. Once in Windows, connect your Eris
5. The drivers should load automatically, if not point it to the SDK drivers folder
Good luck!
Any more ideas
First I tried downloading HTC Sync on my laptop (running Vista) and that didn't do it. Then I deleted the drivers and tried to manually download them back with the ones in the USB folder of SDK and still it wouldn't work.
So I started over and downloaded SDK and Java to my pc (Windows 7) and tried to update the drivers with the ones found in SDK and it wouldn't let me. So I deleted the drivers, unplugged my phone, and plugged it back up. Before I could attempt to direct it to download the intended USB drivers, Windows 7 had already updated with the drivers of it's choice. I can't win for losing.
If you don't mind using one of those "Live" Linux CDs, you could install the recovery using fastboot.
No need to install anything on the PC, and no drivers are needed for Linux, no SDK, no Java, no adb; just make sure to run fastboot as root.
The downloads of fastboot and the Amon_RA recovery are small, so they will easily fit in /tmp.
bftb0
I've never used Linux but I'm willing to try. Please tell me more. Are there "how tos" for this?
When you have your phone plugges in do you have it set to "charge" or "sync"? I know all the how to's say yo have it set to charge only but the inly way my computer ever finds my phone is if it us set to sync.
-------------------------------------
Sent via the XDA Tapatalk App
I set it to charge. I was finally able to install the correct driver. I selected a Google driver from the list it gave me (which my computer did not like) then went back and updated the drivers with those found in the tools usb folder of SDK. IT FINALLY LET ME!
Now I have a new problem. I'm using the command prompt and trying to create a custom recovery. I set it to the tools directory in SDK (where the flash and recovery images are) and I'm entering the commands exactly like the "how to" instructions have them. I keep getting "adb: not found" errors.
Can anyone tell me what I'm doing wrong?
joshw0000 said:
I've never used Linux but I'm willing to try. Please tell me more. Are there "how tos" for this?
Click to expand...
Click to collapse
Well, in the long run it is probably a good idea to resolve the driver install problems you are having on your PC, because it is very useful to have "adb" around, even if you are already rooted and have the ROM of your choice installed.
But, if you would like to do this, here's an outline below. Note that the point of the "Live" CDs is that you are not installing Linux on your machine, you are just booting it directly from the CD - the OS and hard drive on your PC are untouched.
1) Download an ".iso" file from your favorite Linux distro [ 3 ] for their "live" CD. (BIG download, usually 600+ MB)
2) Burn the .iso file to a CD as a bootable CD. (Most decent CD/DVD burner programs know what an .ISO file is, but might refer to them as a disk image).
3) Boot your PC off it! (You might need to hit a key on your PC right after you power it on to go into a boot menu, or the BIOS setup to change the boot order so your PC will try to boot from the CD/DVD before it tries the hard drive).
4) Copy the fastboot [ 1 ] executable for Linux and the Amon_RA recovery image [ 2 ] to /tmp "somehow" - you could just download it using the Linux browser if your network come up automatically (wired ethernet), or you could put them onto a USB key beforehand, and plug that in after Linux has booted; it should mount automatically.
5) Then, open up a terminal window and become root. (Type either "su" or "sudo /bin/bash" - depends on the Linux distro)
6) Attach your (well-charged) phone to the phone via USB, and power it up in fastboot mode (Send+End simultaneously)
cd /tmp
chmod 755 fastboot
md5sum recovery.img (check file sig)
./fastboot devices (check to see you are connected)
./fastboot flash recovery recovery.img
Obviously, if you need to look something up on the internet, it is useful to be networked, so you can use a web browser. The Linux boot will try to autoconfigure network interfaces automatically, but this is going to be most straightforward with a wired connection (Ethernet). Alternatively, if you have another PC or laptop nearby, you could use that.
Good luck.
Edits:
[ 1 ] Find Linux version of fastboot from HTC midway down this page - md5sum 9851bb6ad29cd4b60c9ba9d011ba9efd
[ 2 ] Amon_RA's recovery is located on this XDA page - md5sum e3932991f097993602af3c7a4b61a4f8
[ 3 ] Ubuntu's Current (x32) CD for v10.04 this page
NOTE: This CD is both a "Live" CD and an Install CD. You DO NOT WANT TO INSTALL ANYTHING; you are using the "Live" CD function - see the "show me how" link under Item #3 ("Try It!") on the above linked page
[ 4 ] Various OpenSuSe 11.2 Live CDs
Thanks for the info. I was able to get my drivers installed and run a nandroid recovery. Then I think I bricked my phone:
I just ran a nandroid backup for my Eris which was at stock 2.1 w/ root. I first partitioned the sd to swap - 3072 MB, ext2 swap 3072 MB, and fat32 - remainder. Realizing this was stupid, I went back and changed the partition to swap - 0, ext2 - 512 MB, fat32 - remainder 7680 MB or 7.5 GB. I moved ext2 to ext3 and booted the phone. All my sd was cleared so I copied everything back on (I saved all sd contents to my computer prior to this). I went back to recovery and flashed Eris Lightning 3.02. Everything went successful and when it rebooted, I saw the droid guys, then the "quietly brilliant", then "Verizon" screens. It then began running the "quietly brilliant" and "verizon" screens over and over. I pulled the battery and powered up again but it's still running those two screens over and over. I booted into recovery and attached my phone to the computer. I opened command prompt, entered " sd C:\android-sdk-windows\tools" and then entered "adb devices". It reads "List of devices attached" but there are none. I attempted to add the driver back to my device but when I go to device manager and click "update driver" and point it to the tools directory in SDK, it says that "Windows could not find driver software for your device".
If I can't communicate with my phone via usb and it wont boot, how can I get it to recover?
Any suggestions would help, I'm scratching my head here. I really don't want to have to buy another phone.
joshw0000 said:
Thanks for the info. I was able to get my drivers installed and run a nandroid recovery. Then I think I bricked my phone:
I just ran a nandroid backup for my Eris which was at stock 2.1 w/ root. I first partitioned the sd to swap - 3072 MB, ext2 swap 3072 MB, and fat32 - remainder. Realizing this was stupid, I went back and changed the partition to swap - 0, ext2 - 512 MB, fat32 - remainder 7680 MB or 7.5 GB. I moved ext2 to ext3 and booted the phone. All my sd was cleared so I copied everything back on (I saved all sd contents to my computer prior to this). I went back to recovery and flashed Eris Lightning 3.02. Everything went successful and when it rebooted, I saw the droid guys, then the "quietly brilliant", then "Verizon" screens. It then began running the "quietly brilliant" and "verizon" screens over and over. I pulled the battery and powered up again but it's still running those two screens over and over. I booted into recovery and attached my phone to the computer. I opened command prompt, entered " sd C:\android-sdk-windows\tools" and then entered "adb devices". It reads "List of devices attached" but there are none. I attempted to add the driver back to my device but when I go to device manager and click "update driver" and point it to the tools directory in SDK, it says that "Windows could not find driver software for your device".
If I can't communicate with my phone via usb and it wont boot, how can I get it to recover?
Any suggestions would help, I'm scratching my head here. I really don't want to have to buy another phone.
Click to expand...
Click to collapse
First, relax and take a deep breath; everything's going to be fine.
In the recovery main menu, there is an Item called something like "MS-USB toggle" or something like that. It does not use the adb driver, it uses a standard "Mass Storage Device" USB driver already on the PC. The purpose of this function is to make the SD Card mount on the PC when the Amon_RA recovery is running.
Try that - it should work.
Then, download a conservative ROM such as Ivanmmj's Official 1.0 alpha, or Jcase's "Plain Jane", and copy it to your SD card.
After you have done that, make sure to check the MD5 sum of that .zip file on the SD card. (You should be doing this already).
Then, cleanly dismount the USB drive from the PC with the "Safely Remove Hardware" thingamabob, and toggle "off" the MS-USB toggle on the phone. Return to the main menu, wipe /data, and then flash the "conservative" ROM.
Then boot the conservative ROM just to verify everything is OK.
Next, Backup anything from the SD card that you don't already have (this step might be optional), and boot into recovery, and unpartition your SD card so that the only thing that is there is the VFAT partition.
For the moment, I'll give you some advice: f*ck A2SD. You need to gain some familarity with how the various versions of a2sd work before you start using it..
Very likely you were just stuck in a boot loop created by the re-partitioning you performed after initial configuration of a ROM that uses a2sd. Frankly, it is easy to create conditions for this, especially if you switch between ROMs that use different versions of a2sd, and/or don't understand that certain versions are not correctly backed up with Nandroid at the moment (e.g CLB).
bftb0
Go in to the start menu of your computer or laptop right click on computer and go down to properties and open it up look to the right and you will see something that says advanced system settings click that and it will open up another window for system properties.. Okay look at the bottom of that small window you will see something that says environmental variables, click that. Now you want to scroll through the system variables and find the one that says "path" you want to change that to you ";C:\android-sdk-windows\tools" and save it.. That is where your adb file or app is in your sdk tools folder, so when you open up a command prompt type in adb devices it may say something about killing daemon starting successful.. Don't worry just type it in again you should get your phones serial number thats when you know your good and you can start talking to your phone.. You can try a simple command like adb reboot and it will reboot your phone.. All else fails and you do this and your phone is responding but you can get anything to run in the command prompt type with 1 space cd then another space and then copy and paste "C:\android-sdk-windows\tools" that.. So it will look something like this
cd C:\android-sdk-windows\tools.. That should def do the trick.. Or absolute worst case scenario and you want to make it real easy and not have the fun of doing all the hard but fun work just use the "all in one root script" it will root your phone and it will also install "amon RA recoveryv1.6.2"... Hope this helps you out. LoL I know its long but yo dude I went through the same hell and I finally got everything where I want it!!!!!! Also make sure your HBOOT is under 1.49, if you have 1.49 you cant root... For example 1.46 your good...
Go in to the start menu of your computer or laptop right click on computer and go down to properties and open it up look to the right and you will see something that says advanced system settings click that and it will open up another window for system properties.. Okay look at the bottom of that small window you will see something that says environmental variables, click that. Now you want to scroll through the system variables and find the one that says "path" you want to change that to you ";C:\android-sdk-windows\tools" and save it.. That is where your adb file or app is in your sdk tools folder, so when you open up a command prompt type in adb devices it may say something about killing daemon starting successful.. Don't worry just type it in again you should get your phones serial number thats when you know your good and you can start talking to your phone.. You can try a simple command like adb reboot and it will reboot your phone.. All else fails and you do this and your phone is responding but you can get anything to run in the command prompt type with 1 space cd then another space and then copy and paste "C:\android-sdk-windows\tools" that.. So it will look something like this
cd C:\android-sdk-windows\tools.. That should def do the trick.. Or absolute worst case scenario and you want to make it real easy and not have the fun of doing all the hard but fun work just use the "all in one root script" it will root your phone and it will also install "amon RA recoveryv1.6.2"... Hope this helps you out. LoL I know its long but yo dude I went through the same hell and I finally got everything where I want it!!!!!! Also make sure your HBOOT is under 1.49, if you have 1.49 you cant root... For example 1.46 your good...
Ok so I was trying to install a custom recovery on my P500 and when it turned on it gave me this message
fast boot mode started
udc_start
Click to expand...
Click to collapse
I plug it in it gives me
fast boot mode started
--suspend--
--reset--
--port/change--
--reset--
--port/change--
Click to expand...
Click to collapse
I tried out this method: http://forum.xda-developers.com/showthread.php?t=1088046
After keying the fastboot commands in it says <waiting for device>. Some Google hits told me that it's because I don't have latest USB drivers. I'm sure I do, but I've re-installed them just to be sure. But to no avail.
I'm still on my stock ROM (untouched), phone is rooted (duh) and this is my first attempt to install a custom recovery.
Not allowed to post on that thread ofc, my first post here. All help greatly appreciated. Thanks
Here is the Simple way ..try it
this link for latest working Rom >>
http://forum.xda-developers.com/showthread.php?t=946354
how to root >>
Enable USB debugging on your phone by going to Settings –> Applications –> Development. Check the ‘USB Debugging’ option.
Make sure you have a SD card inserted and mounted in your phone (Don’t know if it’s necessary but before proceeding further I formatted my SD card after taking a backup of the data in it. Why take a risk? Smile)
Download the GingerBreak APK from XDA Developers and get it onto your phone.
Install it by browsing to the GingerBreak APK in any file manager.
Open GingerBreak from your app drawer and press the root button.
Wait for a few minutes. If there are no problems, the device will reboot itself. (The reboot will take quite some time.)
You will see a SuperUser app in your app drawer after the reboot. Open it and see if it is working.
You now have a rooted Optimus One P500 phone.
Now install custom recovery
Follow the below steps to install custom recovery on your LG Optimus One P500.
Install Android Terminal Emulator from Android Market.
Download the file "amon_ra_recovery_installer.zip" from here or here.
Check the MD5 hash value of the downloaded ‘zip’ file. You can use HashTab to do this. Right click on the downloaded file and ensure the MD5 matches 86db8a52b01f049cadb8f097a4c5bd9e.
Extract the contents of the ‘zip’ file to the root of the SD card (Don’t extract inside any folder. For example if your SD Card is mounted on J: in Microsoft Windows then the four extracted files should be right under J:/ like J:/flash_image)
Open the terminal emulator app on your phone and type ‘su’ without the quotes. This will prompt a popup on your phone from the SuperUser app asking you whether you want to give root permissions for the terminal emulator app. Click ‘Allow’ and proceed. The shell prompt will change from the previous user shell ‘$’ to root shell ‘#’ in the emulator.
Now type in the following command and press Enter. The custom recovery will be flashed on to your phone and it will reboot into Custom Recovery.
sh /sdcard/rf.sh
Shut down your phone and boot into Recovery using the Volume Down, Home and Power switch keys. You can move through the options using the volume up/down keys. Use the Menu button to select the option.
In the recovery menu, select Backup/Restore, then select Nand backup. What this will do is backup your current ROM on your SD card, if something goes wrong while flashing the new ROM you can simply boot into recovery and restore your previous ROM.
Connect the phone to your computer and inside Recovery main menu click the option ‘USB-MS toggle’ and then ‘USB-MS Toggle SDCard’. This will unmount the SD card so that you can see it in your computer. Backup everything from your SD Card. Eject from computer and toggle USB again from recovery to mount the SD card back in phone.
Though it is not a necessity for this ROM, I would suggest partitioning your SD card to create swap and ext partitions. The ext partition will come in use if you want to install apps onto your SD card later. This is different from what you see in Froyo versions of Move to SD option. Partitioning will format your SD card, so make sure you backup your SD card as mentioned in Step 3.
Go back to the recovery menu again and select ‘Partition sdcard’. Then select ‘Partition SD’. Create a swap partition of size 0 and ext partition of size 512. Once done hit Back to go again to the ‘Partition sdcard’ menu. Convert the partition you just created to ext 3 and then ext4 using the options ‘SD:ext2 to ext3’ and ‘SD:ext3 to ext4’.
Toggle USB from recovery again. Inside the SDcard create a folder AAA and copy the ROM you downloaded in Step 1 into the folder ‘AAA’ on your SDCard. Once done, eject the SD card and toggle USB again to mount the SD Card in the phone again.
Go to the Wipe option in the recovery menu and wipe userdata, /data, /sd-ext, /sdcard/.android_secure, /cache, ‘Dalvik-cache’
Then go to the Flash Zip option in the recovery menu and select the zip file you copied in Step 6.
Sit back and relax while the zip is flashed. Once recovery shows that flashing is complete, reboot phone from recovery. The first boot will take quite some time.
Enjoy Gingerbread 2.3 on your LG Optimus One P500.
@ above completely unrelated to his problem.
Sent from my LG Optimus One P500 using XDA App
Appreciate your post but it has nothing to do with query sadly.
I was doing what you've mentioned in the installing recovery section when things went wrong.
I run Win7 x64 btw.
istoner said:
Some Google hits told me that it's because I don't have latest USB drivers. I'm sure I do, but I've re-installed them just to be sure. But to no avail.
Click to expand...
Click to collapse
That is correct - drivers issue.
1/ Add DEVMGR_SHOW_NONPRESENT_DEVICES to your environment on Windows and set the value to 1. (In Advanced system settings, Google if you do not know how.) Log off and log back on.
2/ Run devmgmt.msc
3/ There, View - Show hidden devices
4/ Go thru it and uninstall everything Android-related (for starters, ADB Interface and stuff under it, Disk drives, Modems, Ports (COM and LPT), USB controllers - might not be complete list above)
5/ Reboot the PC.
6/ Install the latest drivers for your phone.
7/ If it worked, once you have plugged in the phone stuck in fastboot mode, in device manager you should see Fastboot interface (Google USB ID) in ADB Interface section.
Thanks, trying that out now.
doktornator,
Thanks a bunch. It was an issue with the drivers, I tried your method a few times with little success. Then I let Windows find the drivers (out of all the things), and that worked. Relieved and slightly embarrassed that Windows could what I couldn't
Good that it works now. Fingers crossed to unbrick your phone soon.
Oh it's unbricked and ready to go again lol.
Hi, I am on Windows XP with the exact same problem.
Have tried the B2CApp for driver updates with no luck. Tried windows automatic driver installation,again no luck.
Anything else that I could try on a Win XP machine?
UPDATE:
I have fixed the issue. Got the drivers mentioned in this thread:
Anyone else stuck with Windows XP not recognizing the device even after the B2CApp installation, try these drivers:
http://android.modaco.com/topic/324744-waiting-for-devicefastboot/#
hi guys
Same issue here...and I've had all of the above problems (missing dll, the "waiting for device" due to the absence of proper drivers, etc) . I was able to solve everything up to step 2 of the procedure, i.e., when I type "fastboot flash recovery recovery.img" I get the error message: "cannot load recovery.img".
I tried with both the .img files extracted from the CWM link and AmonRA (thinderg). Any ideas? What am I doing wrong? This is going for hours now and I'm getting desperate!
droidao said:
hi guys
Same issue here...and I've had all of the above problems (missing dll, the "waiting for device" due to the absence of proper drivers, etc) . I was able to solve everything up to step 2 of the procedure, i.e., when I type "fastboot flash recovery recovery.img" I get the error message: "cannot load recovery.img".
I tried with both the .img files extracted from the CWM link and AmonRA (thinderg). Any ideas? What am I doing wrong? This is going for hours now and I'm getting desperate!
Click to expand...
Click to collapse
is the name of the .img file recovery.img?
the command is really fastboot flash recovery (name of file).img
Yes it is...Actually I tried both ways (renaming and keeping the original name)! But I've finally figured it out!!! Here was the problem: when I installed android sdk I added the paths of the required directories (tools and platform-tools) to the system variable section so I could launch tools without writing the path all the time...However, because desperate times call for desperate (and often silly) measures, I decided to type the command cd "name-of-directory" anyway and that...made the trick.
This community is indeed great...I'm going to distribute some "thankyous" now!
I had the same problem with Win7, Updating the drivers from the device manager of w7 worked for me. Hope it helps.
Ps: will take around 15 mins updating.
So since cm7 is so close, I decided to try the flashable cwm from indirect. Unfortunately, after that all that happens is my nook tries to boot, I see the white screen with the package, and then it turns off. If I have it plugged in, it will just loop.
I have partitioned a 4gb sandisk with a 50mb FAT 32 partition as the primary, and have given it the lba and boot flags in gparted from my ubuntu laptop. I never could get it to boot off the sd card.
So now I must ask, where do I go from here. I've searched and crawled this forum, but with the boot loop and not being able to boot off of SD, I am unsure where to go next.
Any tips? To me, it looks like it just keeps trying to boot from the recovery. N + Power yields same results as above. Could really use some help with this head scratcher
So you cant access to CWM at all, if not somehow you must make the sdcard method to work in order to apply the fix posted by Indirect, that is the only way im afraid.
~ Veronica
http://forum.xda-developers.com/showthread.php?p=21785424 there's a link to indirects fix for broken recovery.
_______sig starts here______
Even you were a beginner once
If this post helped click the thanks button!
remember QTIP - Quit Taking It Personal
Okay, I get that. I have two questions though,
1: Does this mean I have to do the recovery method vs the bootable sd card?
2: How am I supposed to run commands to a device that keeps rebooting and doesn't give windows time to communicate with it, or will it send commands to it even though its rebooting?
cleverghost said:
Okay, I get that. I have two questions though,
1: Does this mean I have to do the recovery method vs the bootable sd card?
2: How am I supposed to run commands to a device that keeps rebooting and doesn't give windows time to communicate with it, or will it send commands to it even though its rebooting?
Click to expand...
Click to collapse
To apply Indirect's fix first you need to use Goncezilla's CWM sdcard method to boot into CWM once in CWM basically you use adb tools to fix it, use the link posted below by @dodgepot and read the OP carefully to understand the process.
~ Veronica
Thank you for the replies....
So I've gone through and tried once again to get my nook to boot from SD, and still I can't get it to boot. There is a way to do it using DISKPART in windows, I've made the 50mb fat partition, and set it to active. Have there been any other issues with getting it to work?
Poked around the CM7 thread again, apparently CelticWebSolutions was having a problem booting from an sd card.
Anyone know what he did exactly?
It works! Installing android sdk now
cleverghost said:
It works! Installing android sdk now
Click to expand...
Click to collapse
If you are on windows there is no need of SDK it will just give you troubles with the drivers, you should already have the drivers and adb if you rooted your nook tablet before. The adb drivers came in the zip provided for root and should be in C:\ntroot folder.
~ Veronica
I had access to a xp laptop when I did it on before. Using a win 7 64 bit right now, and indirect's batch file stops part of the way through. I had problems in 64 bit before, using the usb drivers from snowball's mod. Guess its a 64 bit problem. (have used usbdeview and I have verified it sets up as an android composite device.)
cleverghost said:
I had access to a xp laptop when I did it on before. Using a win 7 64 bit right now, and indirect's batch file stops part of the way through. I had problems in 64 bit before, using the usb drivers from snowball's mod. Guess its a 64 bit problem. (have used usbdeview and I have verified it sets up as an android composite device.)
Click to expand...
Click to collapse
i have a windows x64 bits too and when i rooted did not have any problem, do not install sdk it is not necessary, run the runmefirst.bat the one that comes in the .zip with the root files not the one that comes in the drivers.zip from Indirect's root. Snowball uses the same drivers as Indirect.
~ Veronica
I did everything stated above ... still a no go.
I tried indirect's driver half a dozen times and can never seem to get it working on x64. I decided to format my laptop and put xp on it. Like I said, last time I used XP, no problems at all.
Edit: Okay, so I tried it on another x64 machine, and I still run into the same issue!
1. run runmefirst.bat
2. Plug in nook
3. Right click nook device with /!\ and update drivers from c:\ntroot
4. Open up bat from indirect's thread
5. Y, Enter
6. Program starts abd..... locks up right after it states it, I waited a good 10 mins for results.
7. Use USBDeview and delete all references to usb mass storage, nook, and android devices. Unplug nook.
8. Plug in nook and repeat 3-6
9. Bang head against wall lol.
It's probably something stupid I overlooked. Feel free to flame away, I'll take it like a man XD. I started with a nook color, but this is pretty much my first tablet experience. You guys have a lot of experience, and I just want to make sure I am not missing something obvious. (I guess I just don't want to seem like a noob, more like a half noob )
Truth be told, I don't know if this is an issue... but I am runing W7x64 Ultimate N
Alright, so adb devices lists my device as "recovery".
I run the script and it still seems to just stop.
Uhmmm the steps you've done are right, I run a windows professional no N edition but that shouldn't be a problem. Maybe try disabling firewall, antivirus if any also Use ccleaner to clean your registries and cache of your machine, reboot and then try again, I want to repeat do not install SDK (just making sure).
~ Veronica
Sent from XDA premium using my Nook Tablet
okay great! Then I do understand the steps.
Yep, no SDK.
Edit: Going to crash now, ill wake up in a bit and take another crack at it. Thanks for your help so far
Alrighty. I woke up again and decided to give it a try from step one. Still a no go. Going to try wiping my drivers again. I've also disabled all antivirus/antimalware....
Looks like its going to be a fun day heh.
ok keep us updated on how you doing.
~ Veronica
Should I see the nook and sd drives mounting in Windows? Right now, I see the drives, but I can't access them. I don't know if that matters or not.....
Also, when I do an adb devices, mine shows as:
Code:
<String of numbers> recovery
Thats correct?
I also took a look at the batch file and might try to run the first few commands to see if I can find where the problem is manually. I have a feeling it's stopping at:
Code:
adb wait-for-device
We'll see though.
EDIT: Unless when you run the command it's supposed to not do anything, then yes. It's hanging.
Alright. Here is what I've found out.
I've done some forum crawling, and I happened upon a post by Loglug where he says to run the following commands:
Code:
adb shell mount -t vfat /dev/block/mmcblk0p6 /data
adb shell dd if=/dev/zero of=/data/BCB bs=1 count=1088
adb shell dd if=/dev/zero of=/data/BootCnt bs=1 count=1
adb reboot
All of the commands work except the second one. It basically echos back and tells me how to use the command. Now, I read a little further into his post and it says that if you do not get the BN recovery after 8 reboots, your recovery partition might be messed up. Could this be what is preventing me from recovering?
EDIT: NEVERMIND! I am up. Sorry, I feel pretty stupid now lol. I just ran the second command wrong -_-. Sorry, my answer was in the forums, just couldn't find it!
Today my Tablet (Hyundai A7HD) with CM9 started behaving very strange.
It doesnt recognize my sd card, nor its own internal nand storage anymore.
I dont know what to do, since i cant even flash an update through CWM anymore without a functioning storage medium.
the sd card works fine on my pc and i cant format the internal storage through my tablet.
what else can i do to fix this?
I could really use some help, if someone knows a way to do it.
IndigoHD said:
I could really use some help, if someone knows a way to do it.
Click to expand...
Click to collapse
Supply more information. How do you know it's not detecting the internal storage? What are the symptoms? In my point of view, the device would be bricked in this case. Can it boot at all? Or is it fastboot complaining , trying to flash it? The internal memory, is it a MTD for /system plus an MMC for /data, or only an MTD? Only one MMC? Does the devices still exists or not? The partitions..?
Give us some more information, and we'll see if someone here can come with an intelligent suggestion.
Thank you for your reply!
The Device is an Hyundai A7HD and it says that what it calls "sdcard" but actually is its internal storage is damaged. Formatting doesnt work.
It still boots fine but cant access the internal storage, so nothing can be downloaded onto the device and such.
It has a special partition where applications are installed, but nothing can be saved there.
im guessing that something is wrong with the OS, and maybe i could fix it using ADB (if someone could explain to me how)?
Ok, so no /sdcard and /sdcard is supposed to be the phones internal memory, no /data partition, hence not able to download new apps, but the phone boots and so, i.e. system partitions works fine.
This sounds quite like this (confusing) thread to me. In summary, we are talking about three devices, the internal MTD device with /system, boot image, cache etc, the internal MMC device with /sdcard and /data plus an external sdcard named something like /sdcard/external_sd. The internal MMC broken beyond repair (hardware failure).
Still it may be something else only reassembling this.
If you believe your problem is due to some problem with your ROM I suggest you try to reinstall stock ROM using the vendors standard flash tools.
If this doesn't work, we can see if a solution similar to the one in the thread above may be applicable to you.
When i use Astro file manager to look at my phones storage the internal memory calls itself "sdcard" and my ACTUAL micro-sdhc calls itself "extsd" in a folder called "mnt".
the original flash tool doesnt seem to function anymore since i would normally hold down the "menu"-button, then plug the cable into my pc and while STILL holding menu id press power 7 to 10 times and then flashing would start automatically. but ever since installing cwm and a cm9 custom-rom, this doesnt seem to function anymore.
EDIT: in Clockwordmod recovery its called "emmc" for internal memory and "sdcard" for my actual sdcard.
Ok, this is consistent. Can you do a couple of shell commands?
# mount
and
# ls -l /dev/block
... and paste in the result here. As root or as shell user (or any other user) doesn't really matter.
when i plug the device into usb it says debugging enabled. so i open adb and type in "adb devices" and it starts listing devices. But no device is recognized.
EDIT: it recognizes my phone tho.
IndigoHD said:
when i plug the device into usb it says debugging enabled. so i open adb and type in "adb devices" and it starts listing devices. But no device is recognized.
Click to expand...
Click to collapse
Tricky. And not possible to install apps, so no ConnectBot or similar ...
Do you have a link to the CM9 you are using?
kuisma said:
Tricky. And not possible to install apps, so no ConnectBot or similar ...
Do you have a link to the CM9 you are using?
Click to expand...
Click to collapse
wait! i CAN install apps from the market!
and yes, one second.
http://www.slatedroid.com/topic/33373-rom-cm9-nightlies/
im using version 20120711
EDIT: Its an Allwinner A10 Device.
IndigoHD said:
wait! i CAN install apps from the market!
Click to expand...
Click to collapse
That makes all the difference!
So, what does "mount" say?
when i type "adb mount" it just gives me a long list of commands and explanations.
EDIT: there are many versions of connectbot. which one do we need?
IndigoHD said:
when i type "adb mount" it just gives me a long list of commands and explanations.
Click to expand...
Click to collapse
No, run mount from the command line using ConnectBot. ADB didn't work, you told me before.
$ mount
Click to expand...
Click to collapse
but which connectbot on the market is the right one? There are so many.
IndigoHD said:
but which connectbot on the market is the right one? There are so many.
Click to expand...
Click to collapse
Please. Show a little more effort.
https://play.google.com/store/apps/details?id=org.connectbot
i installed it and started it.
now it asks me to connect to a host.
i honestly dont know what im doing here.
IndigoHD said:
i installed it and started it.
now it asks me to connect to a host.
i honestly dont know what im doing here.
Click to expand...
Click to collapse
Select "local", give the session some name of you choice and connect. Now you are running a local shell in the same way as using "adb shell". You are familiar with "adb shell"..?
kuisma said:
Select "local", give the session some name of you choice and connect. Now you are running a local shell in the same way as using "adb shell". You are familiar with "adb shell"..?
Click to expand...
Click to collapse
isnt adb shell a terminal that accepts commands either locally or by usb connection?
EDIT: What should i do now on connectbot?
Can anyone help me, perhaps?
Hello,
I rooted my Hisense Sountab MA-327 and changed some issues in the builds.prop (before I backup-ed this file first). There was no result for what I was doing after a successful restart, so I copied the backup file back to the system folder. After I restart the device, the system hangs in the boot. I tried to login with ADB to see whats went wrong, but I can can not find a good USB driver for this device. Can some please help me? The device is no useless.
- Is there a good USB driver for the Hisense SoundTab MA-327?
- What do I need the get in the system (ADB tools)?
- Or ... is there a flash/firmware for the Hisense Soundtab MA-327 somewhere available?
I really hope some can help me out.
Thanks in advance
Hans
kameraad759 said:
Hello,
I rooted my Hisense Sountab MA-327 and changed some issues in the builds.prop (before I backup-ed this file first). There was no result for what I was doing after a successful restart, so I copied the backup file back to the system folder. After I restart the device, the system hangs in the boot. I tried to login with ADB to see whats went wrong, but I can can not find a good USB driver for this device. Can some please help me? The device is no useless.
- Is there a good USB driver for the Hisense SoundTab MA-327?
- What do I need the get in the system (ADB tools)?
- Or ... is there a flash/firmware for the Hisense Soundtab MA-327 somewhere available?
I really hope some can help me out.
Thanks in advance
Hans
Click to expand...
Click to collapse
Some please!
What I understood:
You are stuck in a bootloop because you edited the build.prop file, luckily, you made a backup and you know what adb is, and, hopefully, you know how to use it.
How do we solve it?
Well, I need some more information, can you boot into recovery or boot into fastboot mode? If you can, we can make your backup build.prop file active and if that doesn't work, we can just reflash stock ROM, everything will be wiped if you flash stock ROM though.
Hi RAZERZDAHACKER,
Thanks for your help. Yes I can boot into recovery/boot mode (android robot with sign and even can see the menu (Volume + Start). I tried to make an USB connection, but I can not find any driver for this device. Under XP I find a good USB driver, but then ADB want install, in Windows 7 or 10 its the opposite. And even with some not good driver, I see with the command "adb devices": No access, and then 1234567890ABCDEF. Can not find any driver. If possible its no problem to reflash stock ROM, but I do not know how to do this.
I appreciate your help.
Hans
kameraad759 said:
Hi RAZERZDAHACKER,
Thanks for your help. Yes I can boot into recovery/boot mode (android robot with sign and even can see the menu (Volume + Start). I tried to make an USB connection, but I can not find any driver for this device. Under XP I find a good USB driver, but then ADB want install, in Windows 7 or 10 its the opposite. And even with some not good driver, I see with the command "adb devices": No access, and then 1234567890ABCDEF. Can not find any driver. If possible its no problem to reflash stock ROM, but I do not know how to do this.
I appreciate your help.
Hans
Click to expand...
Click to collapse
Thanks for replying, you can boot into recovery which is probebly the most vital thing of this whole process (YaY), in recovery, there should be an option called "apply update from adb", if not, kindly name the options. When you click it, what happens in adb? From my experience you don't need drivers to acces "adb sideload" (as the feature is called).
Yes I see the option.
--------
Now send the package you want to apply
to the device with "adb sideload <filename>" ....
---------
I made the backup build.prop earlier to /sdcard on the device. Maybe that was not a good idea.
Oke whats the next step?
Hans
kameraad759 said:
Yes I see the option.
--------
Now send the package you want to apply
to the device with "adb sideload <filename>" ....
---------
I made the backup build.prop earlier to /sdcard on the device. Maybe that was not a good idea.
Oke whats the next step?
Hans
Click to expand...
Click to collapse
Oh, I thought you had it on the pc, I am not sure but can you do "adb sideload /sdcard/build.prop /system"?
RAZERZDAHACKER said:
Oh, I thought you had it on the pc, I am not sure but can you do "adb sideload /sdcard/build.prop /system"?
Click to expand...
Click to collapse
That don't work. I get the help of adb when I give the command string. Do not know how this will work with a USB connection. How should Windows and adb know when to get the input from?
when i try adb usb, it start the daemon , but then error: closed
adb devices -> 0123456789ABCDEF sideload
Oke maybe a reflash stock ROM. How does this work?
Again I appreciate all your help.
Hans
kameraad759 said:
That don't work. I get the help of adb when I give the command string. Do not know how this will work with a USB connection. How should Windows and adb know when to get the input from?
when i try adb usb, it start the daemon , but then error: closed
adb devices -> 0123456789ABCDEF sideload
Oke maybe a reflash stock ROM. How does this work?
Again I appreciate all your help.
Hans
Click to expand...
Click to collapse
You get error closed because you're in sideload, I realized that you can't move files in adb sideload. If you want to flash stock ROM, download this and move it to the adb folder and type "adb sideload nameoftheimg.img".
Hope that helps
RAZERZDAHACKER said:
You get error closed because you're in sideload, I realized that you can't move files in adb sideload. If you want to flash stock ROM, download this and move it to the adb folder and type "adb sideload nameoftheimg.img".
Hope that helps
Click to expand...
Click to collapse
I will try that of course, but the same image I previously put on SDCARD, inserted it in the bay and dis an update from external drive. Then a message came that hardware was not compatible with the update. I can not find a flash for MA-327 and (again) not for the USB driver. But I will try what you suggest.
I get the error: cannot read 'MA347ENMEG3EV02.img'
Image is 1.744.423.512 size
Hans
kameraad759 said:
I get the error: cannot read 'MA347ENMEG3EV02.img'
Image is 1.744.423.512 size
Hans
Click to expand...
Click to collapse
If you have a sdcard that is large enough for the image (minimum 4gb) you can download win32diskimager. Open win32diskimager and select the .img file. Then, connect your sdcard to your pc and format it to fat32. Then locate it on win32diskimager and write the file. This will take a very long while so please be patient. Once it's done, put it in the hisense and attempt to boot. The android "bios" will go through all the nand memory for a bootable image but since that wont work, it will proceed to check external devices (as far as I know) and once it sees the bootable sdcrad it will, hopefully boot. Once you have booted, don't eject the sdcard, conncect the hisense to your pc and install the necessary adb drivers, then, boot into recovery and hit apply update from adb. Then type adb sideload nameoftheimg.img.
Hopefully that works
Oke. But if it boot from sdcard, then it will not install the img from sdcard?? I though it would.
What are the 'necessary adb drivers'?
And when i give the command "adb sideload nameoftheimg.img, will it get the img from sdcard OR from PC?
So the image is on SDcard AND on the PC? I do not get it (sorry)
kameraad759 said:
Oke. But if it boot from sdcard, then it will not install the img from sdcard?? I though it would.
What are the 'necessary adb drivers'?
And when i give the command "adb sideload nameoftheimg.img, will it get the img from sdcard OR from PC?
So the image is on SDcard AND on the PC? I do not get it (sorry)
Click to expand...
Click to collapse
Not as far as I know, I could be wrong, it could install from it. As far as the adb driver goes this is what I meant, you manually install them. Yes, the image is on both the pc and sdcrad.
RAZERZDAHACKER said:
Not as far as I know, I could be wrong, it could install from it. As far as the adb driver goes this is what I meant, you manually install them. Yes, the image is on both the pc and sdcrad.
Click to expand...
Click to collapse
Hello (again)
It will not boot from the sd card. I formatted it FAT32, used Win32DiskManager to write the .img on it, place the sdcard in the hisense and booted it. Press ON. System will not boot on sdcard. Instead it boot from disk. I see the same logo as before, Hisense Smart. It ignores the sdcard.
Booted it in recovery mode (with inserted SDcard). ADB sideload xxx.img, gave same answer: cannot read MAxxx.img. Other option in the recovery mode like update from external image (i hoped the sdcard) does not work either (can not find any /mnt ect file).
How can I force to boot from sdcard? Is the sdcard now bootable (with win32diskmanager). I used Rockchip Create Upgrade Tool 1.43 also, but this app crash when it want to write to SDcard.
No luck with me till now. Is my device saveable at all? Why does it not see the sdcard?
Hans
kameraad759 said:
Hello (again)
It will not boot from the sd card. I formatted it FAT32, used Win32DiskManager to write the .img on it, place the sdcard in the hisense and booted it. Press ON. System will not boot on sdcard. Instead it boot from disk. I see the same logo as before, Hisense Smart. It ignores the sdcard.
Booted it in recovery mode (with inserted SDcard). ADB sideload xxx.img, gave same answer: cannot read MAxxx.img. Other option in the recovery mode like update from external image (i hoped the sdcard) does not work either (can not find any /mnt ect file).
How can I force to boot from sdcard? Is the sdcard now bootable (with win32diskmanager). I used Rockchip Create Upgrade Tool 1.43 also, but this app crash when it want to write to SDcard.
No luck with me till now. Is my device saveable at all? Why does it not see the sdcard?
Hans
Click to expand...
Click to collapse
It is saveable, can you give me the link to the .img file? The fact that it says "cannot read" might be that the image file is corrupt. Are you sure you are typing the right name? You can do adb sideload then type the first letter (if it is a big letter type it as big for example Achicken, type A, if it is aCHICKEN, type it as a) and hit tap, that will ensure you have the exact name and dont tamper with it as in add .img at the end.
RAZERZDAHACKER said:
It is saveable, can you give me the link to the .img file? The fact that it says "cannot read" might be that the image file is corrupt. Are you sure you are typing the right name? You can do adb sideload then type the first letter (if it is a big letter type it as big for example Achicken, type A, if it is aCHICKEN, type it as a) and hit tap, that will ensure you have the exact name and dont tamper with it as in add .img at the end.
Click to expand...
Click to collapse
Yes I always give first letter tap. This is what I typed
adb sideload M (and then tap) => adb sideload MA347ENMEG3EV02.img
https://docs.google.com/uc?id=0Bwr18Lh81gvJazJXTGFQTnhDSEk&export=download
Its a rar. I unzipped it with 7-zip
I tryed also adb shell. But device is unauthorized and I get eroor $ADB)VENDOR_KEYS not set (even when I deleted .android in my users dir. Do not get any permission question on device also. My hope is still a bootable SDCard and image.
Thanks
kameraad759 said:
Yes I always give first letter tap. This is what I typed
adb sideload M (and then tap) => adb sideload MA347ENMEG3EV02.img
https://docs.google.com/uc?id=0Bwr18Lh81gvJazJXTGFQTnhDSEk&export=download
Its a rar. I unzipped it with 7-zip
I tryed also adb shell. But device is unauthorized and I get eroor $ADB)VENDOR_KEYS not set (even when I deleted .android in my users dir. Do not get any permission question on device also. My hope is still a bootable SDCard and image.
Thanks
Click to expand...
Click to collapse
Might seem crazy but check this out, try with your image then his image(s). Remember, booting from an sdcrad is extremely slow, It can actually take 24hours depending on the speed fo your sdcrad so before trying this I suggest you leave it for a day.
RAZERZDAHACKER said:
Might seem crazy but check this out, try with your image then his image(s). Remember, booting from an sdcrad is extremely slow, It can actually take 24hours depending on the speed fo your sdcrad so before trying this I suggest you leave it for a day.
Click to expand...
Click to collapse
Oke, I will wait for a while. But it seems it just hangs in the normal boot.
Thanks for so far. I will report back after the weekend with hopely good news
Hans
I waited for 48hours but nothing happens. Still the screen Hisense Smart.
So it will not boot from SD card and I can not external mount with adb.
When I go in recover mode I see message:
failed to mount /mnt/external_sd (No such device)
SDCard is raw formatted. Can not browse with Windows SDCard. Maybe it should be wrotten different so I can see /mnt/external_sd
Maybe you have a good idea this week for me.
Hans