[HowTo]Root XOLO X1000. - Android Q&A, Help & Troubleshooting

XOLO X1000 was believed to be root protected. Not anymore, follow the below steps to get it rooted.
As far as i know its the only rooting method available, so if anyone has knowledge of other rooting method pls share as it might help in further development.
Here is a screenshot from X1000-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROOT INSTRUCTIONS!!
Pre-requsite
1.Install proper drivers from here
Code:
"drive.google.com/uc?id=0B6xlBPoXgsR3QVZqVGJQbVRBSGc"
2.Download suitable version of CYDIA IMPACTOR FROM
Code:
cydiaimpactor.com
Steps to ROOT
1.Connect X1000 in USB DEBUGGING MODE(Note: Drivers need to be properly installed)
2.Run Impactor.exe from the cydia impactor zip u downloaded
3.By default you will see "# drop SuperSU su to /system/xbin/su"(If not select it from the drop-down menu), click start and let it complete its process.
4.Reboot and you are done :laugh:
In case of any discrepancy fell free to ask :highfive:

One Big Reason to root
Wao!! Just Got KITKAI UI on X1000. Looks awesome
Heres a screenshot:-
Rooting really rocks

Hey, how do you unroot? (As it is the Xolo Customer Care Sucks, so the warranty is really important..)

Help!!!
Hey, I have a small problem.. I used a root app called Soft Keyz and now both my notification bar and soft keys are missing.. I did a little research and realized that it has to do with a borked systemui.apk. So could you please give me your systemui.apk by any chance? I'm kinda screwed here without the soft keys.. Appreciate if you could get back to me soon.. Thanks

SystemUi
shawnkenneth said:
Hey, I have a small problem.. I used a root app called Soft Keyz and now both my notification bar and soft keys are missing.. I did a little research and realized that it has to do with a borked systemui.apk. So could you please give me your systemui.apk by any chance? I'm kinda screwed here without the soft keys.. Appreciate if you could get back to me soon.. Thanks
Click to expand...
Click to collapse
Yup sure.
Im uploading both systemUI.apk and systemUi.odex. You might need to replace both. And remember to correct permissions.

Abhiraj4u said:
Yup sure.
Im uploading both systemUI.apk and systemUi.odex. You might need to replace both. And remember to correct permissions.
Click to expand...
Click to collapse
Thank you so much! I'll tell you once I finish flashing..

shawnkenneth said:
Hey, how do you unroot? (As it is the Xolo Customer Care Sucks, so the warranty is really important..)
Click to expand...
Click to collapse
Only method known yet is to flash stock firmware from here.
And Xolo wont help if we have a software issue. Software is supplied by intel and xolo supplies it. Colo engineers also seem to be novice.
I luckily had an opportunity to meet their software manager. I asked him if he could provide a unlocked bootloader, he was unaware of what a bootloader is. They only distrubute OTA Updates.

Abhiraj4u said:
Only method known yet is to flash stock firmware from here.
And Xolo wont help if we have a software issue. Software is supplied by intel and xolo supplies it. Colo engineers also seem to be novice.
I luckily had an opportunity to meet their software manager. I asked him if he could provide a unlocked bootloader, he was unaware of what a bootloader is. They only distrubute OTA Updates.
Click to expand...
Click to collapse
Yeah, I had a similar experience about their engineers. They mentioned to me too, that the Bootloader is not in their hands.. Well, that's what happens when you try a budget company. All we can hope for is updates, now..
I was all set to buy the Galaxy Grand Quattro but i thought I'd try Xolo, for the Processor and the beautiful screen.. Guess I should've stuck to my instincts
Anyway, thanks for the files.. Everything's back to normal now.. Cheers..

guys has anyone found a way to deodex the phone??? its because I've read that for crt off animation one should deodex the phone ... if anyone has successfully activated crt off animation ... pls let me know ... also if someone is to get the flash tool... ill askthe service center here... but don't know if they'll share... does anyone know how to adb sideload???

Abhiraj4u said:
XOLO X1000 was believed to be root protected. Not anymore, follow the below steps to get it rooted.
As far as i know its the only rooting method available, so if anyone has knowledge of other rooting method pls share as it might help in further development.
Here is a screenshot from X1000-
View attachment 2402069
ROOT INSTRUCTIONS!!
Pre-requsite
1.Install proper drivers from here
Code:
"drive.google.com/uc?id=0B6xlBPoXgsR3QVZqVGJQbVRBSGc"
2.Download suitable version of CYDIA IMPACTOR FROM
Code:
cydiaimpactor.com
Steps to ROOT
1.Connect X1000 in USB DEBUGGING MODE(Note: Drivers need to be properly installed)
2.Run Impactor.exe from the cydia impactor zip u downloaded
3.By default you will see "# drop SuperSU su to /system/xbin/su"(If not select it from the drop-down menu), click start and let it complete its process.
4.Reboot and you are done :laugh:
In case of any discrepancy fell free to ask :highfive:
Click to expand...
Click to collapse
i soft bricked my xolo x1000..can u tell how to flash ..

Deodex
Sukrith said:
guys has anyone found a way to deodex the phone??? its because I've read that for crt off animation one should deodex the phone ... if anyone has successfully activated crt off animation ... pls let me know ... also if someone is to get the flash tool... ill askthe service center here... but don't know if they'll share... does anyone know how to adb sideload???
Click to expand...
Click to collapse
Not yet.
If you come accross one, do share :good:

Flash
Achu Gowda said:
i soft bricked my xolo x1000..can u tell how to flash ..
Click to expand...
Click to collapse
How did that happen?
Follow this to flash.

Abhiraj4u said:
How did that happen?
Follow this to flash.
Click to expand...
Click to collapse
Hey, did you confirm that this technique works?
---------- Post added at 11:55 PM ---------- Previous post was at 11:28 PM ----------
Guys! Now that we finally rooted the phone, let's try doing the one thing that can make our devices fulfill their worth.. That is finding a way to run windows 7 or Windows 8 on the phone. I'm not talking about wp7 or wp8 but the actual windows.. The phone has an x86 processot. So why can't this be done?! 2Ghz and 1GB ought to be enough for a smooth experience.. Guys, please try to work on this..

IT doesnt seem fake either
shawnkenneth said:
Hey, did you confirm that this technique works?
Click to expand...
Click to collapse
@shawnkenneth No i didnt. But it works acc to users of some other forum. I dont have the link now, will post as soon as i find it.
Best of Luck
Edit:- The root procedure they posted was fake. And a comment said it worked. So im a bit suspicious about it. I would recommend you to do some research and go ahead.
And ill be mostly free by 1st dec. So will check it out.
Edit:-U can download the rom and check if its correct

Abhiraj4u said:
How did that happen?
Follow this to flash.
Click to expand...
Click to collapse
i tried that flash method..no use

Achu Gowda said:
i tried that flash method..no use
Click to expand...
Click to collapse
What's the problem?

Abhiraj4u said:
@shawnkenneth No i didnt. But it works acc to users of some other forum. I dont have the link now, will post as soon as i find it.
Best of Luck
Edit:- The root procedure they posted was fake. And a comment said it worked. So im a bit suspicious about it. I would recommend you to do some research and go ahead.
And ill be mostly free by 1st dec. So will check it out.
Edit:-U can download the rom and check if its correct
Click to expand...
Click to collapse
Well, I downloaded the ROM and all I found was an .nbo file.. I don't think it's a ROM (They're mostly zip files right?) Tell me if it's usable or not, when you're free of course..

Abhiraj4u said:
What's the problem?
Click to expand...
Click to collapse
now i went lava head office they flashed within 5mins n gave my phone without charging..nw its working smooth...i ve one doubt does above method is stable??..as i installed supersu 1.75..it asked me to update su binary ..wen i pressed update it showed instalation failed...wen i installed super user it updated su n was fine...wen i tried to install viper4android mod..then it showed dat my phn isnt rooted..wen i installed busybox also same notice appeared.....the link to d viper4android is http://forum.xda-developers.com/showthread.php?t=2191223

Root checker
Achu Gowda said:
now i went lava head office they flashed within 5mins n gave my phone without charging..nw its working smooth...i ve one doubt does above method is stable??..as i installed supersu 1.75..it asked me to update su binary ..wen i pressed update it showed instalation failed...wen i installed super user it updated su n was fine...wen i tried to install viper4android mod..then it showed dat my phn isnt rooted..wen i installed busybox also same notice appeared.....the link to d viper4android is http://forum.xda-developers.com/showthread.php?t=2191223
Click to expand...
Click to collapse
Thats shocking!! Install this. What does it say?
Edit: Supersu doesnt work for many phones, dont rely on that! Use Super user. BusyBox works fine on mine. Just check if you haven't set Automatic response=Deny in Super user->settings->security.
Edit: Busybox screenshot.

Abhiraj4u said:
Thats shocking!! Install this. What does it say?
Edit: Supersu doesnt work for many phones, dont rely on that! Use Super user. BusyBox works fine on mine. Just check if you haven't set Automatic response=Deny in Super user->settings->security.
Edit: Busybox screenshot.
Click to expand...
Click to collapse
oh okie thank you...wat abt viper thing ..did u installed it???

Related

[Guide] How to root MSI Windpad Enjoy 71 and Primo 81 20-03-2014

Update: I've reports that this method also works with the Primo 81, I'm not able to test it since I don't own one of thise devices but users have told in this thread they've had no problems whatsoever following the instructions here to root.
Hi guys, after doing some searching for how to root MSI Windpad 71 all I could find were msi 7 threads so I wanted to share with you what I ended up with. This method will work for both 4.0.4 and 4.1.1 Android systems.
First of all, you will need ADB drivers so your computer will recognize the tablet when connected in USB Debugging mode, you can find the Universal ADB drivers here (I took this link from Koushik Dutta's google+).
Secondly you will need Cydia Impactor, this is a tool that will allow you to root your device (This is the main site in case you want to check it).
Once you have both the ADB Drivers and Cydia Impactor we can begin rooting the device. I'll asume you sort of know what you are doing here if you are planning on rooting the tablet but if you have any question feel free to ask.
Install ADB Drivers (For the drives you need to have the tablet unplugged from the computer).
Cydia Impactor does not need to be installed, is only a package with a couple libraries and an executable file.
Turn on USB Debugging
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Connect the device to the computer through usb cable.
Open Impactor and run the default command hitting Start. The window should look like this
Click to expand...
Click to collapse
All you have to do is click start.
That should be it, once you have done the steps you should install an app which requires root like Titanium Backup and testdrive your newly rooted Windpad 71.
That made the trick for me and it should be working for you, hope it helps.
Kibaruk
PS: I'm not taking credits for neither Koushik's drivers nor Cydia Impactor software, just tryint to make all the information available for easy access for new users that might find this helpful.
I've been told by another user that it also works with MSI Windpad Enjoy 71 running Android 4.1.1
Yes confirmed for 4.1.1
kibaruk said:
I've been told by another user that it also works with MSI Windpad Enjoy 71 running Android 4.1.1
Click to expand...
Click to collapse
Hello
Yes can confirm that this would work on Enjoy 71 on Android 4.1.1.
Have now removed Asian system keyboards and some other bloat.
I guess no specific ROM's would be made for it, too few are sold outside Asia. But there might be ROM's out there that could be tweaked to work on the Enjoy 71.
Regards
PT
Nandroid Backup
Well hope this helps anyone who tries rooting their Windpads 71.
I insist that if you have any question feel free to ask and I'll help you in any way I can.
Also, if someone knows how to get a nandroid backup for the Windpad 71, that would be awesome!
confirmed working for Enjoy 71 Android 4.1.1
kibaruk said:
I've been told by another user that it also works with MSI Windpad Enjoy 71 running Android 4.1.1
Click to expand...
Click to collapse
Yes, root is working for MSI Enjoy 71 running Android 4.1.1
Thanks
How to root Samsung Music Duos GT-S 6012
Thanks kibaruk. By following your simple guide I could successfully root My Samsung Music duos GT-S6012 (4.1.2). The cyda Impactor is simply a great tool,so easy and powerful. It took only a few seconds to complete the job. Is it possible to unroot with the same tool?
mattanur said:
Thanks kibaruk. By following your simple guide I could successfully root My Samsung Music duos GT-S6012 (4.1.2). The cyda Impactor is simply a great tool,so easy and powerful. It took only a few seconds to complete the job. Is it possible to unroot with the same tool?
Click to expand...
Click to collapse
That my friend I havent tried
Any news on a custom ROM? This little tablet is seriously awesome but a bit more configuration options wouldn't hurt.
Also, can you update from 4.0.4 to 4.1.1 using the tablet or do you need to download it somewhere?
Sent from my SC-03E using xda app-developers app
JarodCB said:
Any news on a custom ROM? This little tablet is seriously awesome but a bit more configuration options wouldn't hurt.
Also, can you update from 4.0.4 to 4.1.1 using the tablet or do you need to download it somewhere?
Sent from my SC-03E using xda app-developers app
Click to expand...
Click to collapse
You need to go to the Windpad 71 site and download the system image according to your serial number, then update reading the instructions on the same site it's really simple and if you don't like the upgrade you can always go back downloading the 4.0.4 system image.
I think you have an option to do the same via wifi but I havent tried it.
Also I havent seen any news on a custom ROM. Once you have it rooted you can add whatever system settings you like for example notification toggles, fullscreen to hide the standard navigation bar, so I'm not sure a new custom will add too much to the Windpad since the original one is light and fast.
Thank you for the quick answer!
I updated Android and used the root process described. Worked great! Thanks for all the help!
Yeah, maybe you are right. I am still new to tablets so I don't know much about the things I can do with this version. The learning begins now!
Anyway, If anything comes up ill be happy to be the guinea pig
Sent from my SC-03E using xda app-developers app
Got root on MSI Primo 81
Thanks!
Kindly provide me the custom rom for msi primo 81. I wanna root my new primo 81
Sent from my msi primo 81 using xda app-developers app
thabrez said:
Kindly provide me the custom rom for msi primo 81. I wanna root my new primo 81
Sent from my msi primo 81 using xda app-developers app
Click to expand...
Click to collapse
If you follow the guide as the other user did you will get root without the need for a custom rom, if there is one which I believe there is non.
msi primo81 tablet
any one got Custom Rom for Msi primo81 tablet. i need to root my new primo81
thabrez said:
any one got Custom Rom for Msi primo81 tablet. i need to root my new primo81
Click to expand...
Click to collapse
kibaruk said:
If you follow the guide as the other user did you will get root without the need for a custom rom, if there is one which I believe there is non.
Click to expand...
Click to collapse
Again...
msi primo81 tablet
Thanks , bro i have don it , works like a charm , i have rooted my new priomo81
error !!
cant root msi primo 81
error message says: can't find a device ?? on Cydia Impactor Impactor
what should i do ??
an image for my PC device manager in attachment
mustapha.gis said:
cant root msi primo 81
error message says: can't find a device ?? on Cydia Impactor Impactor
what should i do ??
an image for my PC device manager in attachment
Click to expand...
Click to collapse
You need to install the USB drivers first.
kibaruk said:
You need to install the USB drivers first.
Click to expand...
Click to collapse
After install driver an error message
Says : other error
And I search and found driver and I install it : android compatible adb driver
But still says can't find device
mustapha.gis said:
After install driver an error message
Says : other error
And I search and found driver and I install it : android compatible adb driver
But still says can't find device
Click to expand...
Click to collapse
Did you put your device in USB debug mode? If you are having problems with connectivity it's your driver, the other option is debug mode is not on.

[GUIDE] Root Any Chinese/Indian Android Device

Hi Guys, Few Days Ago I Posted Topic On How To Root Spreadtrum SC8810 Device But No One Was Accurate Enough. I Posted The Same Question On GSM Forum But No One Replied. This Is The 1st Tutorial Abt Rooting All Spreadtrum/Mediatek '&&' Many Other Processors With A Single Click.
Steps:
1) Download USB Drivers For Your Phone. (Google For It). If You Can't Find Drivers For Your Phone Then Contact Me.
2) Download VRoot (Self Modified Version) From Here : Mod Edit: Links removed
3) Install The Program.
4) Connect Your Phone Via USB.
5) Turn On USB Debugging In Your Phone. For 2.3 '&' Lower: Settings>Applications>Development>USB Debugging
For 4.0 '&' Above:
Advance Settings>USB Debugging
*However, It May Depend On Your Phone's Manufacturer*
4) Run The Program.
5) It Will Identify Your Phone '&&' Then Click On 'GREEN' Button Next To Your Phone's Icon. This Software Is In Chinese So Just Follow My Instructions.
6) Now Wait For Few Minutes '&&' Let The Rooting Procedure Be Carried On!
7) After Few Mins Your Phone Will Be Rebooted '&&' You Will Get The Root Access. SuperUser Will Be Installed In Your Phone.
8) Now You Can Install Busybox OR You Can Check Your Root By 'Root Checher App'.
WARNING : Rooting Can Void Your Phone's Warrenty '&&' Wrong Way Can BRICK It. Try @ Your Own Risk!
________________________________________
Post Your Valuable Comments '&&' Hit THANKS If It Worked For You!
#Tested On : YXTEL G926, Micromax Smarty, Samsung Galaxy Y Duos Lite '&&' Lava Iris A45
#Rejoice!
thedevilashish said:
Mod Edit: Quote of OP removed
Click to expand...
Click to collapse
i think difference chipset , sometime di different way to roor
i can't root it on mine
Which Phone??
WRwallence said:
i can't root it on mine
Click to expand...
Click to collapse
Which Phone Are You Trying To Root??
Lemme Explain:
ArikaSalaf said:
i think difference chipset , sometime di different way to roor
Click to expand...
Click to collapse
I Knw But By This Tool You Can Root Few Processors With A Single Click! It Works Awesome!! Give It A Try.
Usb drivers for karbonn-a51
Sir please provide me with my phone,s drivers for pc.
My phones model is karbonn a51.
Its a spreadtrum Device.
Thanks in advance
Heres The Link
parmeet2727 said:
Sir please provide me with my phone,s drivers for pc.
My phones model is karbonn a51.
Its a spreadtrum Device.
Thanks in advance
Click to expand...
Click to collapse
Heres The Link For Latest Spreadtrum Drivers ( Works Best With Win 7) : http://www.mediafire.com/?dz1eq82q48b9x8b
Plz Hit Thanks
how to root from ubuntu? only using win app?
If you have trouble getting ADB driver installed use www.snappea.com, it can install a generic adb driver that will work for what we need!
You Rock
Thanks for this man, I had a unmodified copy of that program and it was driving me nuts, just click and boom rooted.
You rock dude. Go the sub $100 5inch screened chinese android phones
Edit : I noticed in your old guide that you could remove the chinese superuser after installing english superuser and updating, I've done that
and the prompts now come up from the english superuser, but the chinese one has made itself a system app somehow and I can't delete it,
is there a solution for that or should I just disable it and ignore it.
Bryden said:
Thanks for this man, I had a unmodified copy of that program and it was driving me nuts, just click and boom rooted.
You rock dude. Go the sub $100 5inch screened chinese android phones
Edit : I noticed in your old guide that you could remove the chinese superuser after installing english superuser and updating, I've done that
and the prompts now come up from the english superuser, but the chinese one has made itself a system app somehow and I can't delete it,
is there a solution for that or should I just disable it and ignore it.
Click to expand...
Click to collapse
So you get english superuser prompts when something asks for root? Try using Titanium Back up to uninstall the chinese superuser app.
Ignore It
Bryden said:
Thanks for this man, I had a unmodified copy of that program and it was driving me nuts, just click and boom rooted.
You rock dude. Go the sub $100 5inch screened chinese android phones
Edit : I noticed in your old guide that you could remove the chinese superuser after installing english superuser and updating, I've done that
and the prompts now come up from the english superuser, but the chinese one has made itself a system app somehow and I can't delete it,
is there a solution for that or should I just disable it and ignore it.
Click to expand...
Click to collapse
Plz Ignore It Cz If You Will Uninstall SuperUser Then You May Loose Root Access.
Size Of Chinese SuperUser Might Be Like 700 Kb. It Wont Affect You Much. So Just Leave It As It Is! !
Plz Specify The Phone Model
griciko said:
how to root from ubuntu? only using win app?
Click to expand...
Click to collapse
Plz Specify The Phone Model & Chipset Along With Android Version!!
thedevilashish said:
Plz Ignore It Cz If You Will Uninstall SuperUser Then You May Loose Root Access.
Size Of Chinese SuperUser Might Be Like 700 Kb. It Wont Affect You Much. So Just Leave It As It Is! !
Click to expand...
Click to collapse
It is actually quite simple to swap out the chinese superuser for the SuperSU or english Superuser if you know how. I posted how in my post about using Vroot.
http://forum.xda-developers.com/showthread.php?p=43163569
Also - for most devices needing an ADB driver, just install snap pea from here: www.snappea.com It will install a generic ADB driver that will work just fine with any and every device I have used it on so far! You might also consider referencing or linking the developer of this tool since it is not of your own design. :good:
boston
thedevilashish said:
Plz Specify The Phone Model & Chipset Along With Android Version!!
Click to expand...
Click to collapse
Orange Lumo (Boston 4G)
Android JB 4.1.2
Qualcomm Snapdragon 400 MSM8930
without root, a can't switch internal with external memory, and other features.
Try Using One Click Android Apps
griciko said:
Orange Lumo (Boston 4G)
Android JB 4.1.2
Qualcomm Snapdragon 400 MSM8930
without root, a can't switch internal with external memory, and other features.
Click to expand...
Click to collapse
Try Using One Click Android Apps For Rooting! Such As : FramaRoot & z4root..
Its In APK Format And You Can Install These Apps In Your Phone!
Alternatively, You Can Check Your Phone For Vulnerblities By X-Ray App For Using Rooting Exploits
#Hit Thanks If I Helped You!
griciko said:
Orange Lumo (Boston 4G)
Android JB 4.1.2
Qualcomm Snapdragon 400 MSM8930
without root, a can't switch internal with external memory, and other features.
Click to expand...
Click to collapse
I would suggest you to install PDA net and use the following method , this works for most mobiles , use normal mode
Root Many Android Phones:good:
thedevilashish said:
Try Using One Click Android Apps For Rooting! Such As : FramaRoot & z4root..
Its In APK Format And You Can Install These Apps In Your Phone!
Alternatively, You Can Check Your Phone For Vulnerblities By X-Ray App For Using Rooting Exploits
#Hit Thanks If I Helped You!
Click to expand...
Click to collapse
It's works, thanks, now only one question. After default restore (reset) phone, I must re-root it?
Unroot?
griciko said:
It's works, thanks, now only one question. After default restore (reset) phone, I must re-root it?
Click to expand...
Click to collapse
You Can Do It By Flashing A Fresh Stock ROM Of Your Device
fresh rom
thedevilashish said:
You Can Do It By Flashing A Fresh Stock ROM Of Your Device
Click to expand...
Click to collapse
)) what you mean "fresh stock ROM"? I can't find any resources for my model, about ROM - no discussions ))) It's an unique device, no support or upgrades ))
If i reset it, will rest as rooted? it's true? or if are some instructions to root my ROM, pls, redirect me, I'll try to make it.
thanks

Stock Kitkat Rom..Life is Better Now

Hurrah..
As I promised, Take this goodie from me. Another Stock Kitkat. This is based on F180L firmware.
This is only flashable via Philz Recovery. No other recovery is supported as of now.
Statutory Warning: It is your phone. Do not blame me for anything. I am not responsible for any harm you do to your device.
Most things are fixed. It includes Stock music app, Stock boot animation from LG(I really like this!). Integrated vu talk with the contacts app. Knock Off support, Three finger Slide, OSP and many more things you will just love,
This is just a test version, so some things do not work!
1st when you install the rom, the1st screen greets you with English, suddenly this changes to Korean(it might be other also). Again change to English in the same page. Then it fixes to English.
2nd Root does not work. You have to flash SuperSu
3rd MTP SD card is not working. means when connected to computer, the SD is showing as blank. Media scanner is also failing. Will see this soon.
4th, 5th, 6th you report...
Now the detailed steps:
1. Flash Philz recovery
2. Flash Stock KK Thanks to @Level99 for the hosting.
3. Flash SuperSu
4. Enjoy and report bugs!
Below is the version 2, the deodexed rom with lots of goodies from lg g3.
Deodexed Stock Kitkat
Flash this for SD Card fix Thanks to @knight4frat
Hit thanks if this has helped you :good:
This is just a request, if you like my works, Please donate to upgrade my network.
Reserved for future use
md5 value of the ROM:
c4d9379c191f964394b8592da930e53d
thanks for your work man, just one question Is there all network mode available to set & after set it th tethering & network menu - mobile network option is working or FC's?
dr.nakum said:
thanks for your work man, just one question Is there all network mode available to set & after set it th tethering & network menu - mobile network option is working or FC's?
Click to expand...
Click to collapse
Working w/o FCs as demonstrated in the video!
Nice!!!!
Downloading now, will report my experience tomorrow when i flash it, unfortunately my dsl connection is only 2mb/0.5mb at home, and i already went over my data cap for my cellphone. But thank you so much for your work. :good::good:
One small suggestion @gourab4u can you put the md5 check-sum of the file, that way i and others can check if the ROM is downloaded correctly before flashing, and thank you again!
Link Temporally Disabled!!!
:crying: When i was downloading it failed and when i went to try to download again, i saw the cause, link temporally down due to high traffic :crying: Oh Well!! Guess I'll have to wait a couple hours to try again.
DarkboyR said:
:crying: When i was downloading it failed and when i went to try to download again, i saw the cause, link temporally down due to high traffic :crying: Oh Well!! Guess I'll have to wait a couple hours to try again.
Click to expand...
Click to collapse
Working for me. Can you try again?
DarkboyR said:
Downloading now, will report my experience tomorrow when i flash it, unfortunately my dsl connection is only 2mb/0.5mb at home, and i already went over my data cap for my cellphone. But thank you so much for your work. :good::good:
One small suggestion @gourab4u can you put the md5 check-sum of the file, that way i and others can check if the ROM is downloaded correctly before flashing, and thank you again!
Click to expand...
Click to collapse
updated the md5 value in the second post
Led light working? Is this the same as paulicat's rom? Whats the difference?
Sent from my LG Optimus G using Tapatalk
gourab4u said:
Working for me. Can you try again?
Click to expand...
Click to collapse
Still not working for me, maybe for you it works because you're the owner of the account.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DarkboyR said:
Still not working for me, maybe for you it works because you're the owner of the account.
View attachment 2795474
Click to expand...
Click to collapse
got an email that link is suspended due to high traffic. Anyone who has downloaded can you please mirror? My connection sucks
gourab4u said:
got an email that link is suspended due to high traffic. Anyone who has downloaded can you please mirror? My connection sucks
Click to expand...
Click to collapse
Did u face any problem with WiFi ? i tried porting the ROM and WiFi wasn't working ... even Logs were not helping in figuring out the things
EDIT : For getting pics , music in gallery & music player from external SD , download app "SD Scanner" From Market ,
Open it & change the path to scan from "storage/emulated/sdcard0" to "storage/sdcard1"
Let the scan complete .. u'll be able to see all the stuff from External SD & also some stuff will be accessible in computer
via MTP Mode ...
sam_0829 said:
Did u face any problem with WiFi ? i tried porting the ROM and WiFi wasn't working ... even Logs were not helping in figuring out the things
EDIT : For getting pics , music in gallery & music player from external SD , download app "SD Scanner" From Market ,
Open it & change the path to scan from "storage/emulated/sdcard0" to "storage/sdcard1"
Let the scan complete .. u'll be able to see all the stuff from External SD & also some stuff will be accessible in computer
via MTP Mode ...
Click to expand...
Click to collapse
Thanks.. This I know, but will like to implement this out of the box..and regarding wifi issue, the logcat helped me. A library file is responsible for that. it is libusim_aka.so
gourab4u said:
got an email that link is suspended due to high traffic. Anyone who has downloaded can you please mirror? My connection sucks
Click to expand...
Click to collapse
Once the link is unsuspended, I will grab it and host a mirror for you.
Sent from my LG-F180K using XDA Premium 4 mobile app
gourab4u said:
Thanks.. This I know, but will like to implement this out of the box..and regarding wifi issue, the logcat helped me. A library file is responsible for that. it is libusim_aka.so
Click to expand...
Click to collapse
it worked .. thanks ... btw my laptop shows the device hardly in MTP Mode... does the same happens with u ? may be because of windows 8.
Level99 said:
Once the link is unsuspended, I will grab it and host a mirror for you.
Sent from my LG-F180K using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank You. If I were to upload again, then I would probably go mad!!
Do you have any idea, when the link will be active again?
sam_0829 said:
it worked .. thanks ... btw my laptop shows the device hardly in MTP Mode... does the same happens with u ? may be because of windows 8.
Click to expand...
Click to collapse
You can try my rom, once it gets mirrored. No problem like that in my rom. I too use Windows 8.1
gourab4u said:
Thank You. If I were to upload again, then I would probably go mad!!
Do you have any idea, when the link will be active again?
Click to expand...
Click to collapse
i think it will take 3 days to active the link
dr.nakum said:
i think it will take 3 days to active the link
Click to expand...
Click to collapse
3days!
Can you tell me a better place for uploading? I do not have Android file host developer account!
Difference between this and Paulicat's ROM is...?

[Q] New P780 Out of the box - ROOTED properly?

Hello,
I have bought brand new P780 with original rom. I have problems with running sevreal networking apps and VNC server(depends which one from Google store shows curve lines or Lenovo logo).
I suppose, that device may not be fully rooted - is that possible? Can I check this in any way? Which App to check this is best (from google play)?
thank you
xysen0 said:
Hello,
I have bought brand new P780 with original rom. I have problems with running sevreal networking apps and VNC server(depends which one from Google store shows curve lines or Lenovo logo).
I suppose, that device may not be fully rooted - is that possible? Can I check this in any way? Which App to check this is best (from google play)?
thank you
Click to expand...
Click to collapse
I think and i saw this error on new phones that are "arranged" with gapps from china!
The google apps are not installed corectly!
Can i ask what original ROM do you have ?
What superuser or supersu is installed ?
stympy said:
I think and i saw this error on new phones that are "arranged" with gapps from china!
The google apps are not installed corectly!
Can i ask what original ROM do you have ?
What superuser or supersu is installed ?
Click to expand...
Click to collapse
Thank you for your fast reply
Hmm, ist strange as I dont do anything with that phone from the first run.
I suppose that this is my original ROM. Would you like to know details from system preferences to confirm which ROM I have?
I have especially bought the busybox +/pro version from Play. Is it good?
Thank you
xysen0 said:
Thank you for your fast reply
Hmm, ist strange as I dont do anything with that phone from the first run.
I suppose that this is my original ROM. Would you like to know details from system preferences to confirm which ROM I have?
I have especially bought the busybox +/pro version from Play. Is it good?
Thank you
Click to expand...
Click to collapse
Hi. Yes from Settings/about phone or something / version information
I use BusyBox Free from Stericson . It is good !
stympy said:
Hi. Yes from Settings/about phone or something / version information
I use BusyBox Free from Stericson . It is good !
Click to expand...
Click to collapse
Thank you for reply,
Android ver 4.4.2
Baseband(?)
p780,v101,2014,/03/12 15:06
compilation
vibeui_v2.0_9439_7.10.1_dev_p780
My version is BusyBox PRO also from Stericson but I dont know what should I do there. Only verify root privileges?
What is interesting, now, when I gone to that menu and clicked "System update" Ive got info about app crash.
What is more inetresting in that ROM i havent any Lenovo native apps like Lenovo Power Manager, but I have other 'system' apps(cleaners,etc).
Thank you
xysen0 said:
Thank you for reply,
Android ver 4.4.2
Baseband(?)
p780,v101,2014,/03/12 15:06
compilation
vibeui_v2.0_9439_7.10.1_dev_p780
My version is BusyBox PRO also from Stericson but I dont know what should I do there. Only verify root privileges?
What is interesting, now, when I gone to that menu and clicked "System update" Ive got info about app crash.
What is more inetresting in that ROM i havent any Lenovo native apps like Lenovo Power Manager, but I have other 'system' apps(cleaners,etc).
Thank you
Click to expand...
Click to collapse
Hi. Your version is an chinese version ! Developer Version of VIBEUI 2.0
It is an modified version!
If you want to put a stable version tell me !
stympy said:
Hi. Your version is an chinese version ! Developer Version of VIBEUI 2.0
It is an modified version!
If you want to put a stable version tell me !
Click to expand...
Click to collapse
w0w, I was sure that I am buying not-modified version of phone. OMG
Thank you for that information.
Could you please give me more informatiion what should I do now? I would like to use all features of Android, with OTG, networking advanced features, and VNC server. Bluetooth, and WIFI and GPS I also need.
And the most important - I need to have that STABLE. as stable as possible. And what is the most mportant now - everything is stable.
thank you for support
xysen0 said:
w0w, I was sure that I am buying not-modified version of phone. OMG
Thank you for that information.
Could you please give me more informatiion what should I do now? I would like to use all features of Android, with OTG, networking advanced features, and VNC server. Bluetooth, and WIFI and GPS I also need.
And the most important - I need to have that STABLE. as stable as possible. And what is the most mportant now - everything is stable.
thank you for support
Click to expand...
Click to collapse
This is more diversified talk! For simple choice i recomend for the first time to choose betwen this 2 firmware:
ROW - means Rest Of the World
CN -china !
Here is the ROW : LINK!
Here is Baralajbi's firmware: LINK! This is CN based.
Both are flashed with SP Flash tool !
Tell me what ROM do you want to install from those 2 !
stympy said:
This is more diversified talk! For simple choice i recomend for the first time to choose betwen this 2 firmware:
ROW - means Rest Of the World
CN -china !
Here is the ROW : LINK!
Here is Baralajbi's firmware: LINK! This is CN based.
Both are flashed with SP Flash tool !
Tell me what ROM do you want to install from those 2 !
Click to expand...
Click to collapse
Thank you for reply
Would be great to have full support for European languages. I would like to ave t9 in English and few EU languages if possible.
Also I would like to have any way-back as I have 2 years of the warranty - is that possible to replace the ROM (and have good effects) and make it unvisible in service when , ex. I will have any problem in later time?
Thank you
xysen0 said:
Thank you for reply
Would be great to have full support for European languages. I would like to ave t9 in English and few EU languages if possible.
Also I would like to have any way-back as I have 2 years of the warranty - is that possible to replace the ROM (and have good effects) and make it unvisible in service when , ex. I will have any problem in later time?
Thank you
Click to expand...
Click to collapse
Hmmm... this is a little bit harder!
For complete backup you must do a trick and flash a custom recovery like TWRP. From the recovery you must do a full backup af your existing ROM.
After that you can replace your ROM with one i have showed you !
Try to reboot your phone in recovery and see iff you have allready a custom one !
stympy said:
Hmmm... this is a little bit harder!
For complete backup you must do a trick and flash a custom recovery like TWRP. From the recovery you must do a full backup af your existing ROM.
After that you can replace your ROM with one i have showed you !
Try to reboot your phone in recovery and see iff you have allready a custom one !
Click to expand...
Click to collapse
Am I correct to do that by pushing [volume down] key when holding power button?
Additionally, could you please let me know if would be possibility to make the default storage on SD card?
Thank you
xysen0 said:
Am I correct to do that by pushing [volume down] key when holding power button?
Additionally, could you please let me know if would be possibility to make the default storage on SD card?
Thank you
Click to expand...
Click to collapse
Because you have your rom rooted you could download from market a small app called : Reboot to recovery !
Orr power off the phone and start with power vol- and vol+ pressed !
xysen0 said:
Am I correct to do that by pushing [volume down] key when holding power button?
Additionally, could you please let me know if would be possibility to make the default storage on SD card?
Thank you
Click to expand...
Click to collapse
How to make the default storage on SD card:
Go to settings/storage/default write disk
There you will choose External Storage.
Voila: bigger storage!
stympy said:
Because you have your rom rooted you could download from market a small app called : Reboot to recovery !
Orr power off the phone and start with power vol- and vol+ pressed !
Click to expand...
Click to collapse
Hello,
Thank you for your message
I have rebooted to recovery via app
And the phone load screen with title Android system recovery <3e>
As I havent seen that before (earlier on other phones TWRP and CWM only) I am not sure know if thath is enough to safe what I need ?
stympy said:
How to make the default storage on SD card:
Go to settings/storage/default write disk
There you will choose External Storage.
Voila: bigger storage!
Click to expand...
Click to collapse
About the storage- I suppose that my P780 is 4gig-version.
I have done what you mentioned long time ago, but still have problems when trying to install new apps (and each I am moving to SD) - Insufficient storage space
Thank you, best regards
xysen0 said:
Hello,
Thank you for your message
I have rebooted to recovery via app
And the phone load screen with title Android system recovery <3e>
As I havent seen that before (earlier on other phones TWRP and CWM only) I am not sure know if thath is enough to safe what I need ?
Click to expand...
Click to collapse
Seems that you have stock recovery installed. You need to reflash one of that custom recovery.
Sent from my SMT TAB 704DC
---------- Post added at 02:54 PM ---------- Previous post was at 02:51 PM ----------
xysen0 said:
About the storage- I suppose that my P780 is 4gig-version.
I have done what you mentioned long time ago, but still have problems when trying to install new apps (and each I am moving to SD) - Insufficient storage space
Thank you, best regards
Click to expand...
Click to collapse
Install from market Titanium Backup. Open it and on the first page take a screenshot and post here. I need to see the partitioning tipe.
Sent from my SMT TAB 704DC
stympy said:
Seems that you have stock recovery installed. You need to reflash one of that custom recovery.
Sent from my SMT TAB 704DC
---------- Post added at 02:54 PM ---------- Previous post was at 02:51 PM ----------
Install from market Titanium Backup. Open it and on the first page take a screenshot and post here. I need to see the partitioning tipe.
Sent from my SMT TAB 704DC
Click to expand...
Click to collapse
hello,
is that what you need?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xysen0 said:
hello,
is that what you need?
Hi. Yes! This is what i need!
Seems that you have still space in system and in media !
Click to expand...
Click to collapse
stympy said:
xysen0 said:
hello,
is that what you need?
Hi. Yes! This is what i need!
Seems that you have still space in system and in media !
Click to expand...
Click to collapse
Hmm, but to install that I have to clean all cahces and temporary.
What should I do now? For backup current ROM and modify to any working?
regards
Click to expand...
Click to collapse
hello,
how can I backup all my phone? What and how should I do ?
Is there any play store safe app to do that?
I suppose that I need to replace the Andorid recovery? Or maybe I would can do that without removing it?

Lollipop (& dsa ROM) for MTCB/C Xposed & 7Floor Sound Mod NOW WORKING !!

Myself and another user emailed Klyde a week ago about Android L, after having seen L running on an MTCB unit on youtube, but we ve not heard anything back yet, however, @kumarai just posted this link in the original thread :
http://forum.xda-developers.com/showpost.php?p=67111483&postcount=21754
Its apparently L for 1024x600 RK3188 units, I ve not tested it, he hasnt said whether he has or not, just thought I d open a thread so as many people as possible could know.
If its real, all credit to @kumarai for telling us all
EDIT: @dsa8310 has also opened a thread here about his version :
http://forum.xda-developers.com/and...mtcc-units-t3495001/post69495591#post69495591
Very cool
Tested and it works 100% on Joying UQ124
1) Install the ROM via about machine or Recovery + Wipe data
2) wait 15-20 min for install
3) load recovery and clean cache and data 3 times and reboot
4) wait for good 5-10 min to load the first run.
Enjoy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is how to get ROOT:
ROOT:
Factory settings> *#hct#root#
Install King Root latest version from their website
took few minutes after being stock on 90% and succeeded
Installed Kingo SuperUser
installed ES file explorer and I have Root access
to make iGO work on android 5:
deleted the files
igo> content > voice>
Voice_TTS-nua-eng-au-m1-lua-dri40-vssq5f22.zip
Voice_TTS-nua-eng-au-f1-lua-dri40-vssq5f22.zip
EASYConnected App should updated to version 4.2.0
provided http://forum.xda-developers.com/showpost.php?p=67182889&postcount=133
kumarai said:
Hello friends
good news! Android 5.1.1 CPU 3188 1024 Stock, collected from the dump under MCU MTCB download - https://yadi.sk/d/QIQsDMTLsA4FB
after loading error may fall down, loaded into recovery, select the item: wipe all data / factory and cache reset
https://yadi.sk/i/EVzTxxAgsA6oK
https://yadi.sk/i/hHJepmcIsA6ub
Click to expand...
Click to collapse
I ve also uploaded it to the MTCB fileserver, link in my signature.
(Goes out to car to test it . . . . . )
typos1 said:
I ve also uploaded it to the MTCB fileserver, link in my signature.
(Goes out to car to test it . . . . . )
Click to expand...
Click to collapse
Just let us know if it works in mtcb units. Much appreciated
magnificus said:
Just let us know if it works in mtcb units. Much appreciated
Click to expand...
Click to collapse
We already know it works in MTCB units, @kumarai has tested it and posted screenshots of the about screen.
typos1 said:
I ve also uploaded it to the MTCB fileserver, link in my signature.
(Goes out to car to test it . . . . . )
Click to expand...
Click to collapse
So that is probably official KLD firmware, niceee
Johny DJ said:
So that is probably official KLD firmware, niceee
Click to expand...
Click to collapse
Well hopefully, as I said I saw it on youtube and @kumarai has tested it on his, Klyde told me over 6 months ago that they were working on L for release this year at some point.
typos1 said:
Well hopefully, as I said I saw it on youtube and @kumarai has tested it on his, Klyde told me over 6 months ago that they were working on L for release this year at some point.
Click to expand...
Click to collapse
I don't understand why it is not released and why they did not answer you when you emailed them?
and where did this head unit pop up from?
doctorman said:
I don't understand why it is not released and why they did not answer you when you emailed them?
and where did this head unit pop up from?
Click to expand...
Click to collapse
Klyde have been working on Android L for a while, as I said to you last week in the MTCD thread, I saw it on youtube so someone must be selling them already. I did read somewhere that its being released in June, so maybe the units with it are for sale already and in June (just a few days away) it ll be released for 4.4.4 units ?
Maybe ask @kumarai where he got the unit that he got it off from ?
Anyway, I ve tested it and it seems to be working, boot time is maybe a little bit slower than 4.4.4. but I cant get root, when I type in " *#hct#root# " it says "ADB root" as it did on 4.4.4 but no "superuser" entry appears in settings and Root explorer wont let me paste into system/priv-app. I havent tried anything else, including root checker as it was just a quick test for those of you who didnt trust @kumarai ..
This shot would seem to indicate that its possible to add a lock screen, but from my brief play I couldnt find a way to :
DONT FORGET TO THANK @kumarai HE GOT THE FLASH DUMP FOR L AND POSTED I IT ON XDA !!
typos1 said:
Klyde have been working on Android L for a while, as I said to you last week in the MTCD thread, I saw it on youtube so someone must be selling them already. I did read somewhere that its being released in June, so maybe the units with it are for sale already and in June (just a few days away) it ll be released for 4.4.4 units ?
Maybe ask @kumarai where he got the unit that he got it off from ?
Anyway, I ve testedit and it seems to be working, boot time is maybe a little bit slower than 4.4.4. but I cant get root, when I type in " *#hct~root~ " it says "ADB root" as it did on 4.4.4 but Root explorer wont let me paste into system/priv-app. I havent tried anything else, including root checker as it was just a quick test for those of you who didnt trust @kumarai ..
View attachment 3768307
This shot would seem to indicate that its possible to add a lock screen, but from my brief play I couldnt find a way to :
View attachment 3768308
Click to expand...
Click to collapse
very cool..
I will try it tonight and play around with it.
Fingers crossed! I've been trying to get volume control working with my USB DAC without success, and I believe 5.1.1 would fix that, right?
Sent from my XT1575 using Tapatalk
typos1 said:
I cant get root, when I type in " *#hct#root# " it says "ADB root" as it did on 4.4.4 but no "superuser" entry appears in settings
Click to expand...
Click to collapse
This is the same for the MTCD units apparently, so I guess it will be back to the old pre-rooted images or maybe we can try the method used for the MTCD units, there is root in the MTCD units isnt there @doctorman ?
brbarnyard said:
Fingers crossed! I've been trying to get volume control working with my USB DAC without success, and I believe 5.1.1 would fix that, right?
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Really cant say, but I know a few people have successfully used USB DACs on 4.4.4, try and see !
typos1 said:
Really cant say, but I know a few people have successfully used USB DACs on 4.4.4, try and see !
Click to expand...
Click to collapse
The DAC works fine, I just can't get control over the volume. User aluver worked with me, but I just couldn't get it working with my DAC
Sent from my XT1575 using Tapatalk
typos1 said:
This is the same for the MTCD units apparently, so I guess it will be back to the old pre-rooted images or maybe we can try the method used for the MTCD units, there is root in the MTCD units isnt there @doctorman ?
Click to expand...
Click to collapse
I havent root mtcD personally but many people reported rooting mtcd with Root code *#hct#root#
doctorman said:
I havent root mtcD personally but many people reported rooting mtcd with Root code *#hct#root#
Click to expand...
Click to collapse
Hmm, I just came across an old pm from @Marius B asking how to root an MTCD unit, he said he got the message "ADB root" but that he couldnt see a superuser menu, maybe simply installing a root app would sort it ?
typos1 said:
Hmm, I just came across an old pm from @Marius B asking how to root an MTCD unit, he said he got the message "ADB root" but that he couldnt see a superuser menu, maybe simply installing a root app would sort it ?
Click to expand...
Click to collapse
@Malaysk I just tested the 5.1 ROM update provided here on Joying mtcB JY-UQ124 with 100% success
all seems to work
*#hct#root# sais ADB Root but SuperSU# does not get root access..
boot time seams a bit faster to me.
Easy connected app has a newer version but it asks for activation... is there a solution for the easy connected app activation? this is the first time I come across this but I know others had issue with other version of it..
tried older version of easy connected that I know was working and same problem, the easy connected app gets confused with android 5 and loses the certificate. it is a ROM issue. perhaps it will work in eventual Malaysk ROM
ROOT:
Factory settings> *#hct#root#
Install King Root latest version from their website
took few minutes after being stock on 90% and succeeded
Installed Kingo SuperUser
installed ES file explorer and I have Root access
Do you happen to have a USB DAC or headset to try? I'm hoping it works"out of the box" since it's 5.1
Sent from my XT1575 using Tapatalk
brbarnyard said:
Do you happen to have a USB DAC or headset to try? I'm hoping it works"out of the box" since it's 5.1
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
no sorry
---------- Post added at 10:24 PM ---------- Previous post was at 09:41 PM ----------
@typos1 the easy connecetd app needed a certificate in the ROM to work.. been googling and can not find the post that explained how to get arround the activation,
there was a certificate file that had to be copied to system root or something like that
perhaps @Malaysk knows it as he fixed it in his ROM
No improvement
I've this in two original HU's from Klyde and it's not an improvement from a functional
point of view. It resets itself randomly and is a lot slower than Malaysk's 4.4 on my other HU's.
Rooting like said above. Standard 4.4 + King root.

Categories

Resources