Hi good day guys,
My name is Rico and I'm a newly member of this site.
i have a DOCOMO panasonic p-02d lumix phone
specs:
1 GHz Dual-core TI OMAP4430 processor
Memory : 2 GB ROM / 1 GB RAM
Android Ver. 4.0.4 no Root
my phone stuck in bootloop on the picture
"To Ensure waterproof performance, back cover and close ...".
The phone will not boot.
I need a factory reset.
In recovery mode is a password required and this is from Docomo.
Answer from Docomo:
We apologize for the inconvenience, but we do not give our customers the password for the force reset.
How do I get into the "fastboot mode", because I could with "fastboot-w" also delete all data.
Or is there a other methode for wipe user data on none rooted phone?
Is there something else i can try before i use a hammer and destroy my Phone ?????
Any help would be great.
Related
hi all ,
i have bought a phone to a website from china but have a problem with the phone , when start i cant do anything have a message said me " launche application crashed " and always have this message i cant go to settings for reset , i have do factory mode and do a card flash , have reset but not repair my problem after many research not find the real name to the phone for repair this i just said is a : ALPS I9200 have MTK6575 CPU and 512mb of ram and 152mo of rom is single sim card and android 4.0.3
i have take picture for show you , thank you for your help , sorry for my english if is bad iam french .
Hi, I have a note II (fake) GT-N7100 with MT6575 chip, dual some.
My original problem was an invalid IMEI issue and after attempting to fix it with mobile uncle now the phone continues to reboot itself.
I'm not to familiar with doing phone flashing. Not sure if that's what I need to do.
I did read somewhere about a program called shuame but not sure if that's what I need. I did
install the software and connected it to my phone after entering factory mode and my phone and factory mode
menu then appeared In the software. Factory mode menu is in Chinese but I can translate. Shuame is also Chinese but can't work it out.
any suggestions or ideas would be appreciated.
the only details from the phone that I have are:
GT-N7100
Dual Sim
MT6575 chip
and ver 4.0.4 ice cream
that's all I can recall from the info page.
regards.
hi
need some help on my galaxy S4 :crying:
model: SAMSUNG-SGH-I337
android version: 4.2.2
1. why i got 0 (zero) on my IMEI ? (I can make and receive calls)
2. why my phone perform reset (No predefined times) - I think when is in effort - But not sure about it
3. How do I know the phone is not fake ? (I bought it two days ago)
thanks in advance
What carrier you on ?
Just guessing but if its gsm phone then its all maybe on your sim.
China is building phones can do both cdma and gsm at same time dual sim i think
That's probably the reason why they sold it.
They ruined it ur phone.
Solve:
Reinstall stock firmware through KIES.
let me know if it works.
(I had the same)
I think flashing modem files are pretty enough
Sent from my C6902 using XDA Premium 4 mobile app
several steps and a lot of reading requires
GoldSoft said:
hi
need some help on my galaxy S4 :crying:
model: SAMSUNG-SGH-I337
android version: 4.2.2
1. why i got 0 (zero) on my IMEI ? (I can make and receive calls)
2. why my phone perform reset (No predefined times) - I think when is in effort - But not sure about it
3. How do I know the phone is not fake ? (I bought it two days ago)
thanks in advance
Click to expand...
Click to collapse
You need efs pro if you had done a backup of several qualcomm radio modem earlier. Read more. http://forum.xda-developers.com/gal...ol-updated-08-12-13-efs-professional-t1308546
Then you need QPST software, also it is from qualcomm. It is a diagnostic tool but you have to activate the com-port within your phone with some tricks or usean apk called phoneutils.apk.
If you search you'll find. Me to had corrupt imei when I tried som things inside my phone, for example I deleted the NV-build (the golden build) and thats I it happens. I tried to unlock it. In this forum XDA, it is not aloud to tell you how.
In short you have to be
rooted,
usb-debugging enabled,
installed free version of busybox.apk.
installed software on your pc (efs pro and qpst)
and phone-mode in usb-modem-diagnostic. http://forum.xda-developers.com/showthread.php?t=1626638&page=11
You probably have lte so it is qualcomm. But don't trust me, search by your self. Do you have the original backup or the original imei-number left in the box you bought?
I made a restore from my friends backup and putted back the imei when the com-port was connected, With Efs-Pro manager in the link I wrote.
Good luck!
Dont forget to thank me if I helped a little, I haven't checked if you have qualcomm (4g) or exynos chipset (SoC) systemOnChip
hello i have an android device for 3 monts now called "accent a400" this has:
CPU: MTK 6572 dual core 1.2 ghz
screen: 4" WVGA pannel
RAM: 512 mb
connectivity: 2g: gsm 850 900/1800/1900mhz
3g: WCDMA 900/2100MHZ
WIFI: 802.11 a/b/g/n
camera: 5mpx back/ 0.3mpx front
OS: android 4.2.2 jellybean
and it's having a bootloop for the 3th time now i couldnt do any thing, i tried all the solutions given to me by the internet, i browsed to find any rom to flash it with but the device isn't necessarally known by any means the only thing that keeps this alive is the warranty as they send this to the manufacterer evry time and they flash it with the stock rom, i tried contacting them for the method or just for support on how to get this device running and no luck by now
i am no android modder i dont consider rooting or flashing my device just because im afraid to hard brick it
and if my phone is not in a bootloop any more it doesn't run google apps
im freaking out right now i really need help i don't want to factory reset this phone again because i did it before and it didnt bootup and got stuck on the manufacturer's logo
i was considering flashing the rom for the "techno p5" wich has similar specs but i don't think it'll work please i need help i can't use my phone if it doens'trun any apps
Hello to the community,
I need urgent help with my P Smart 2019 (POT-LX1). Briefly some info, have the P Smart 2019 cheap auctioned as defective with software error. The previous owner said he had tried a board software / flash file (.xml) to flash unfortunately he no longer knows which it was exactly.
After that, the P smart 2019 no longer started and it is displayed a different boot logo (Huawei Ascend) he has then started several attempts with different firmware (dload) and (.xml) all without proper success. P smart 2019 now starts again but as boot logo is still Huawei Ascend and the firmware seems to be only a board dignose firmware. In Settings --> System --> About Phone is no model ( unknown )
Device name "PAN
Build number "POT-LX1-BD 1.0.0.53
EMUI version 5.0
Android version 7.0
IMEI 00000000000000
CPU - Octa-Core 1.8Ghz
Ram - 2GB
internal storage 11GB free /16GB total (but should be 64GB)
what or which firmware / board software do I have to flash that everything is recognized correctly again and the correct boot logo is displayed?
that should be feasible... I hope. I am familiar with the process of Test Point flash only I do not see through the whole firmware and board software at Huawei more... POT-LX1 or POT-L21 then the various board flash file (.xml).
EDIT: the eRecovery language is chinese!
Would be more than grateful if someone could help me there times something. despair slowly.
please excuse my bad english.
LG and thanks
Yunyhx said:
Hello to the community,
I need urgent help with my P Smart 2019 (POT-LX1). Briefly some info, have the P Smart 2019 cheap auctioned as defective with software error. The previous owner said he had tried a board software / flash file (.xml) to flash unfortunately he no longer knows which it was exactly.
After that, the P smart 2019 no longer started and it is displayed a different boot logo (Huawei Ascend) he has then started several attempts with different firmware (dload) and (.xml) all without proper success. P smart 2019 now starts again but as boot logo is still Huawei Ascend and the firmware seems to be only a board dignose firmware. In Settings --> System --> About Phone is no model ( unknown )
Device name "PAN
Build number "POT-LX1-BD 1.0.0.53
EMUI version 5.0
Android version 7.0
IMEI 00000000000000
CPU - Octa-Core 1.8Ghz
Ram - 2GB
internal storage 11GB free /16GB total (but should be 64GB)
what or which firmware / board software do I have to flash that everything is recognized correctly again and the correct boot logo is displayed?
that should be feasible... I hope. I am familiar with the process of Test Point flash only I do not see through the whole firmware and board software at Huawei more... POT-LX1 or POT-L21 then the various board flash file (.xml).
EDIT: the eRecovery language is chinese!
Would be more than grateful if someone could help me there times something. despair slowly.
please excuse my bad english.
LG and thanks
Click to expand...
Click to collapse
Nobody any Idea?