Related
So, I have CyanogenMod 7.0.3 Stable flashed in my Legend, and it's been working just fine. Until couple days ago when I made some theme changes through Theme Chooser and flashed some theme add-ons. Now the phone is acting just stupidly. It's in a bootloop (sometimes loops in HTC bootscreen, sometimes in the CyanogenMod bootscreen), usb connectivity doesn't work (fastboot usb works, adb/mass storage etc. doesn't). I have tried to wipe the phone and flash that rom/recovery again through fastboot, but fastboot says "remote: not allowed" or something like that. Bootloader works, fastboot works, even recovery works but it's no use 'cause adb driver doesn't recognize the phone.
Please guys, help me. What should I do to get my phone running again? (working CyanogenMod or even a stock without root, I don't care, I just want this thing up and running again)
EDIT: And the weird thing is, that couple times I was able to boot the phone normally using recovery by just sticking the usb cable into the phone. And also, couple times I was able to boot it normally by just using fastboot reboot (I was able to get to the HTC Setup screen and then it would crash and show just black screen with notification bar)
It's possible the you're USB bricked. A quick search of "USB unbrick" should bring the required thread to light (search in development)
TheGrammarFreak said:
It's possible the you're USB bricked. A quick search of "USB unbrick" should bring the required thread to light (search in development)
Click to expand...
Click to collapse
Yeah, I have thought of that! Only problem is that how am I supposed to get the required files (flash_image and .img) to SD card without a way to manage SD card? Can I flash the image using fastboot?
I can't do it inside the phone 'cause I'm in a bootloop and can't boot the phone.
EDIT: Is there a chance to do a wipe and flash a new rom using only fastboot or something?
In theory you can flash without recovery, but only if you're S-OFF. You'll need the ROM in .img format too.
I used a microSD to SDCard reader to transfer the files., they're fairly cheap in high street stores. Or borrow a friends Android phone
TheGrammarFreak said:
In theory you can flash without recovery, but only if you're S-OFF. You'll need the ROM in .img format too.
I used a microSD to SDCard reader to transfer the files., they're fairly cheap in high street stores. Or borrow a friends Android phone
Click to expand...
Click to collapse
Well, am I able to flash those files once they are in the SD card? I mean with S-ON cause I don't have S-OFF?
Or is my phone a complete brick? =( Cause I'm pretty much all out of ideas..
Once you've got the files needed for a USB unbrick on your SD card you'll be fine
if you have recovery access did you try to make apply update from SD card in order to pass in cwm recovery.
if you got a USB brick you can use a multifonction printer to mount your SD on your computer.
So in a nutshell, my problems are:
- My Legend is in a bootloop
- Apparently my phone is USB bricked cause only fastboot works
- I don't have a recovery, when I go manually into recovery (recovery -> POWER + VOL UP) it goes into stock recovery
- And also my phone is S-ON
Could you guys point me into the right direction with this, I really want my phone back working. What should I do?
When you get to the stock recovery, navigate to ans select "flash update.zip from SDcard" That should get you to ClockworkMOD. Once there you'll need to use ADB to push the files required for the USB unbrick procedure to the SDcard (adb push [files-on-pc] /sdcard/) You should no be able to perform the the USB unbrick.
You may need your phone plugged into a PC for it to boot
TheGrammarFreak said:
When you get to the stock recovery, navigate to ans select "flash update.zip from SDcard" That should get you to ClockworkMOD. Once there you'll need to use ADB to push the files required for the USB unbrick procedure to the SDcard (adb push [files-on-pc] /sdcard/) You should no be able to perform the the USB unbrick.
You may need your phone plugged into a PC for it to boot
Click to expand...
Click to collapse
But I'm getting this blue recovery screen with only four options instead of the original green one including option to flash zip. So wtf has happened?
EDIT: In the blue recovery screen it says Can't open cache/recovery/command. And when I choose "apply sdcard:update.zip" it says "signature verification failed" and it aborts the installation.
Fakeflash.
TheGrammarFreak said:
Fakeflash.
Click to expand...
Click to collapse
So I am able to flash roms only using this menu? Am I correct? Just do a wipe and apply update.zip?
Why does it say "verification failed" then?
EDIT: Oh I see, I have to download fake-flash update.zip and apply update.zip takes me to the clockwork recovery? When I put the update.zip to the SD card and apply it, then it should go on with out any "verification failed" errors?
TheGrammarFreak said:
Fakeflash.
Click to expand...
Click to collapse
My main priority is just to get the phone to run normally again, I can worry about the USB Unbrick later. So I just want to do a full wipe and flash Cyanogenmod again. Am I able to do all that is required to run the phone again normally with fakeflash?
Thanks in advance TheGrammarFreak, I really appreciate your help!
The phone won't run normally until you do a USB unbrick.
One of the things that happens with this USB brick is that a flag for advanced debugging gets set. It's a very deep setting, and the setting is read ad the HBOOT level. If this flag is set to on (like it is in a USB brick) the phone will not boot unless it's plugged into a computer. Remember that
In order to get your phone back I believe you will need to plug your phone into the PC and turn it on. It should boot, if not you will need to get to recovery and wipe/reflash (you'll need to do this while plugged into a PC too). Once you have a running system/you're in recovery you can use ADB to push the files needed for a USB unbrick to your SD card.
Assuming you got that far, you should be in a prime position to follow the USB unbrick procedure.
I'm going away tomorrow for a week, and I will not be online at all. If you need more help you will need to get someone else in. That said, I believe that with the information in this thread, the USB unbrick thread, the fakeflash thread and Google you have enough information and help top fix your phone
TheGrammarFreak said:
The phone won't run normally until you do a USB unbrick.
One of the things that happens with this USB brick is that a flag for advanced debugging gets set. It's a very deep setting, and the setting is read ad the HBOOT level. If this flag is set to on (like it is in a USB brick) the phone will not boot unless it's plugged into a computer. Remember that
In order to get your phone back I believe you will need to plug your phone into the PC and turn it on. It should boot, if not you will need to get to recovery and wipe/reflash (you'll need to do this while plugged into a PC too). Once you have a running system/you're in recovery you can use ADB to push the files needed for a USB unbrick to your SD card.
Assuming you got that far, you should be in a prime position to follow the USB unbrick procedure.
I'm going away tomorrow for a week, and I will not be online at all. If you need more help you will need to get someone else in. That said, I believe that with the information in this thread, the USB unbrick thread, the fakeflash thread and Google you have enough information and help top fix your phone
Click to expand...
Click to collapse
Legend is up and running again! Thank you so much TheGrammarFreak!
Same problem here, but slightly different. He doesn't recognize my SD card (tried different ones) anymore ... out of the blue ... so how can I unbrick ??
http://forum.xda-developers.com/showthread.php?t=751265
follow this guide, helped me a lot.
you'll need root access.
Hi everyone,
Well I'm in that freak out stage.... where I am sure some of you have been.
Heres my issue...
I have a transformer prime that;
I just unrooted using Vipermod
Then did a factory reset
Now I am stuck in CWM recovery
I attempted to do a restore but after it gets done it brings me back into the recovery
I attempted to ADB but the command prompt opens and closes right away ( I assume from not being in USB debugging, which I cant get into without a rom)
I have no rom's currently downloaded into the prime as I just wiped everything in there as well.
Please i'll gladly pay $5 to anyone who can fix this without it breaking more (hard bricking if I havent already done so)
AHHH please guys help, I'm afraid it will run out of battery soon then I'll be royally screwedddd
anyone?
are you on windows 7?
yes windows 7 professional sp 1 32bit . to reiterate I am stuck in Clockwork mod Recovery without root, and with no roms on the internal SD. I have access to one restore that works but after it completes it reboots back in recovery.
birchnick10 said:
yes windows 7 professional sp 1 32bit . to reiterate I am stuck in Clockwork mod Recovery without root, and with no roms on the internal SD. I have access to one restore that works but after it completes it reboots back in recovery.
Click to expand...
Click to collapse
Turn on your tablet, let it boot into CWM.
Open cmd, cd to the directory with adb (for example cd C:\android), then copy this line of text below and right click > paste in the command prompt window.
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3 bs=1 count=13
Click to expand...
Click to collapse
That should get you out of CWM into Android, assuming your restore works fine.
Attempted and got error device not found.
I have uninstalled the transformer drivers and also installed the universal drivers as said in other threads.
I assume to use ADB i need usb debugging on for it to read??
My issue is I cant get into any rom so turning on usb debugging is a no go.
can i fastboot push a rom to the internal sd card or better yet can i install a rom from the external SD card via Clockwork mod recovery?
birchnick10 said:
Attempted and got error device not found.
I have uninstalled the transformer drivers and also installed the universal drivers as said in other threads.
I assume to use ADB i need usb debugging on for it to read??
My issue is I cant get into any rom so turning on usb debugging is a no go.
Click to expand...
Click to collapse
Navigate to %android sdk folder%\extras\google\usb_driver, open android_winusb.inf and copy the following in the sections
"Google.NTx86" and "Google.NTamd64"
; TF201
%CompositeAdbInterface% = USB_Install, USB\VID_0B05&PID_4D01&MI_01
%CompositeAdbInterface% = USB_Install, USB\VID_0B05&PID_4D03&MI_02
;
; Fastboot for all projects
%SingleBootLoaderInterface% = USB_Install, USB\VID_0B05&PID_4DAF
Click to expand...
Click to collapse
Save the file and then try running the adb command I gave again.
Says error device not found. I appreciate the help keep it coming it's keeping my hope alive. I really hope this isnt truly hard bricked.
I cant get ADB to read the transformer prime. When I type adb devices nothing shows up . it starts the daemon successfully but then doesn't show the tfp.
Thank you again for helping. I am honestly going to pay who ever finds the true fix. This stress sucks
birchnick10 said:
Says error device not found. I appreciate the help keep it coming it's keeping my hope alive. I really hope this isnt truly hard bricked.
I cant get ADB to read the transformer prime. When I type adb devices nothing shows up . it starts the daemon successfully but then doesn't show the tfp.
Thank you again for helping. I am honestly going to pay who ever finds the true fix. This stress sucks
Click to expand...
Click to collapse
Try the instructions here. Try using this only as a last-ditch resort.
it wont shut off either... i tried both of the above mentions and cant get adb to recognize the prime
Attempted both and stuck at recovery loop without root. any more ideas? is it possible to flash rom from external sd? or is there a recovery I could fastboot rhat has this feature?
Attempted both and neither work. I need to somehow get usb debugging enabled while in clockwork mod. Or figure out a way to install a rom via external SD card while in CWM. Any more help is appreciated!
birchnick10 said:
Attempted and got error device not found.
I have uninstalled the transformer drivers and also installed the universal drivers as said in other threads.
I assume to use ADB i need usb debugging on for it to read??
My issue is I cant get into any rom so turning on usb debugging is a no go.
Click to expand...
Click to collapse
No adb debugging is needed in cwm. Even without any ROM installed. Recovery is different from Android.
Try to long press power (at least ten seconds) to hard reboot, and see if it changes something in device detection.
Did a hard reset and it boots me back into Recovery.
I was able to get a new rom into the internal SD via the emergency/backup.zip method but after it completes and I do a reboot it just boots right back into recovery again.
Any help please is apprecaited.
$5 bounty for a fix via paypal
Oh joy. This one is a spaghetti western in the making.
Okay. Question first : Does Windows 7 RECOGNISE the device in any way shape or form. To find out if this can be done, you need to power up the device and hold the power and volume down buttons, DO NOT press volume up when it suggests a kernel image. If you get three icons, hit vol down once and up once, then plug the USB cable into the PC and the tablet.
If it sees "Something", you've a chance. Download the naked universal USB driver from the dev forum, install it and have your device pick it up on the windows computer. I'm assuming from your comments that you've GOT a working fastboot and adb so I'm going to skip the instructions on that.
If you do have a something, and it's recognised, hit fastboot -i 0x0b05 reboot, if it reboots of it's own accord at this point, you can confirm you have working ADB and Fastboot access. From there you've a few choices. My personal preference would be to ADB push a rom down -after- doing a rebuild of the recovery image via fastboot (I really recommend TWRP for this bit).
http://forum.xda-developers.com/showthread.php?p=26093546#post26093546 - This post here which I wrote will explain how to flash TWRP from fastboot access, presuming you can get it. Once that step is done, wipe EVERYTHING from TWRP, and I mean the whole nine yards, including /system. Raze the memory down to only things it can't actually nuke. Once that's done, reboot to fastboot protocol, get a ROM pushed via ADB and install from inside TWRP.
That -should- get you back in business. Though judging by the tangle you're in, I make no promises.
ADB wont recognize the device. I have installed and uninstalled the drivers about 5 times.
It wont boot into fastboot - just goes directly into Clockwork Mod recovery. Even while holding power and volume down text comes up that says looking for asus recovery. then says clockwork recovery and boots directly into that.
The only way I can get anything into the internal SD card is with MasterZen88's Emergency script tool that puts any 1 file into the internal SD card as backup.zip
It was unrooted prior to all of this as well.
*cringe*
If ADB isn't working -at all- and it's not using the naked USB drivers to get you any kind of workable access. You're starting to smell very much like a hard brick scenario. I'm honestly not sure if there's a way out of that. A lot of the solutions for unbricking absolutely require that the device is able to talk to the outside world, if it's not and the ADB shell is essentially telling you it's talking to dead air, you're in a world of pain.
It's a long shot but it may be worth speaking to ASUS to see if they are willing to, for a fee, restore your tablet to factory settings. Though I can't imagine that will be cheap or simple. If you are able to get an RMA or a means of getting ASUS to poke it, make sure to take photos. Their techies appear to have the worst case of butterfingers in the world.
Go over Pandaball's suggestion, because that's really the last step I can think of before contacting ASUS
Edit: I'm running Windows 8.1 and that is probably the problem. I need find some universal drivers that work for win8.1 with the moto e.
Hi,
I decided to try to root a recently acquired Moto E (XT1526/5.1) and got it unlocked easily enough by following directions online. I have downloaded the motorola usb drivers, TWRP, Android SDK, SuperSU, and tried different versions.
After following the unlock guide, it says DEVICE IS UNLOCKED. STATUS: CODE 3
I open the command prompt in platform-tools and enter fastboot flash recovery recovery.img (file was renamed), and it shows it's sending recovery OK, writing recovery OK, and finished.
After that things don't progress, and there are options that I can scroll through:
Restart Bootloader...
Power off...
Factory Mode - resets it to fac settings I think
Bar Codes...
BP Tools?
QCOM?
Bootloader Logs...
Start - does the warning that it's unlocked and then starts the phone.
Reocvery Mode - flashes the unlocked warning and nothing else. It goes back to fastboot flash screen.
Guides show it going to TWRP screen after running the command prompt, and then options to load up files.
Am I missing something?
TIA
Download mfastboot and redownload the recovery img
hetor99 said:
Download mfastboot and redownload the recovery img
Click to expand...
Click to collapse
Thanks.
Decided to install it on my desktop. While trying various files, my laptop accidentally got hit with Chromium virus. It looked like all required files were there, but kept having problems with a couple of those sdk files (tools/platform tools).
I'm still getting the following error:
( bootloader) has-slot :recovery: not found
And once again the Android SDK Tools and Android SKD Platform-tools that are under Tools (preview channel) are unchecked. Not sure if they are needed.
Follow the instructions of how to install on the general section
hetor99 said:
Follow the instructions of how to install on the general section
Click to expand...
Click to collapse
thanks lol.
I believe I have downloaded and installed/reinstalled everything 2 or 3 times. I have followed the guide here while reading and watching the video. I googled for other guides to fill in any information I didn't understand or see clearly. That was before I made this thread. I was hoping there might be something that is commonly overlooked. Phone seems to be ready, so I am assuming it's on the pc side. I read there is a way to do it with just the phone, but I'll try one more time on my laptop since that's what I have to work on today.
L8Show said:
thanks lol.
I believe I have downloaded and installed/reinstalled everything 2 or 3 times. I have followed the guide here while reading and watching the video. I googled for other guides to fill in any information I didn't understand or see clearly. That was before I made this thread. I was hoping there might be something that is commonly overlooked. Phone seems to be ready, so I am assuming it's on the pc side. I read there is a way to do it with just the phone, but I'll try one more time on my laptop since that's what I have to work on today.
Click to expand...
Click to collapse
How to Install TWRP Recovery and Root MOTO E
https://www.youtube.com/watch?v=9Jh-O2LGL3Y
OK, it is done.
Took a couple days with several hours of clicking, and checking settings, and reading and researching, and watching videos, and downloading, and installing/uninstalling, and restarting, but it's now rooted! Way too much time wasted even though it was raining and the gf and I were just watching movies for a lot of it. She kept asking me why I'd waste so much time and remind me I had a perfectly fine iphone nearby. Today I finally got to the point where I had given up. I figured something was screwed up with the phone after that reset on my computer.
Some highlights that may or may not be helpful for the next moto e rooter:
USB debugging was somehow switched to off a few times after I turned it on. Might have been after resetting phone, but who knows exactly.
I set screen to stay while connected via USB.
I removed all the apps I could and took out the sd card.
Kingoroot stuck at 66% many, many times, and then phone would restart. Research showed it may be accessing the wrong ADB instance or something. So I uninstalled SDK, fastboot, Minimal, etc. Anywhere it could have been hiding. Even did a system restore to last week the day I reinstalled windows. Didn't help one bit. Which is to also say... there are a half dozen or more legit options. Try different ones if you are relatively confident you followed directions the 1st 10 times.
Ministro didn't have moto e in their data base.
Finally back to XDA after checking a dozen videos (I have to admit I was completely dumbfounded and was mad at the whole process). I found XDA Kingroot and right away it worked, but it needed permission to allow apps that were not certified or some thing. I can see how people would think this is so easy. If I had started with this, I'd never have had to ask for help here. Btw, was this my problem all along? Did I miss that in the instructions or was it something else possibly? I don't remember if I did that before since it was 3 days ago.
So far I am thoroughly impressed with the this moto e. I paid $40 for it on a whim and now that I can remove a bunch of bloatware and customize it a bit, I think it may be a good gateway into android devices.
Thanks for looking and all your suggestions.
I've been in the same boat for weeks, thank you. I thought I had already tried KingRoot, but must have not, as it's working now and I have root and twrp installed, http://www.kingroot.net/ . Thanks again !
XT-1526 Sprint Prepaid Moto E 2nd gen.
faheyd said:
I've been in the same boat for weeks, thank you. I thought I had already tried KingRoot, but must have not, as it's working now and I have root and twrp installed, http://www.kingroot.net/ . Thanks again !
XT-1526 Sprint Prepaid Moto E 2nd gen.
Click to expand...
Click to collapse
Glad it helped.
So I decided that I try and get TWRP to run on this phone. After researching, I followed a guide using stock firmware and a modified batch file. Phone is working, but wifi/4G/data isn't. I did all the basic trouble shooting and nothing works so I decided to just try install TWRP/supersu. The problem is that ADB isn't working again. It works when phone is on and shows up in adb devices, but not boot mode. Fastboot shows the device. But ADB doesn't show the device while in boot mode and it's not working.
I updated the drivers in the device manager.
I tried minimal fastboot and 15 second adb.
Reinstalled motorola drivers.
Anyone have any ideas?
Thx!
L8Show said:
Glad it helped.
So I decided that I try and get TWRP to run on this phone. After researching, I followed a guide using stock firmware and a modified batch file. Phone is working, but wifi/4G/data isn't. I did all the basic trouble shooting and nothing works so I decided to just try install TWRP/supersu. The problem is that ADB isn't working again. It works when phone is on and shows up in adb devices, but not boot mode. Fastboot shows the device. But ADB doesn't show the device while in boot mode and it's not working.
I updated the drivers in the device manager.
I tried minimal fastboot and 15 second adb.
Reinstalled motorola drivers.
Anyone have any ideas?
Thx!
Click to expand...
Click to collapse
First of all adb doesn't work in fastboot mode. It only works when the phone is up and running.
Try
fastboot devices
If it shows up your device's serial no. then you're good to go, everything's working fine.
I didn't got what's you're exact problem is. Pardon me
Will you explain what you did before your wifi stopped working.
-z3r0- said:
First of all adb doesn't work in fastboot mode. It only works when the phone is up and running.
Try
fastboot devices
If it shows up your device's serial no. then you're good to go, everything's working fine.
I didn't got what's you're exact problem is. Pardon me
Will you explain what you did before your wifi stopped working.
Click to expand...
Click to collapse
Thanks for that information. I thought I saw adb devices command working in fastboot mode in one of the videos so I thought that was the problem. I thought adb needed to root the phone.
In order of what I've done with the phone so far:
Sent/got codes and unlocked moto e.
Turned on developer options and USB debugging.
Was then unable to get TWRP or the other cw something to work using the command fastboot flash recovery (file name) or fastboot boot... commands.
Gave up and installed Kingroot and everything worked fine.
Decided to try to install TWRP and superSU since kingroot had worked. I read that the phone needed to be flashed back to stock to do this and watched/read a couple of guides. http://forum.xda-developers.com/showthread.php?t=2759495
I used the following named file:
SURNIA_ACG_LTE_5.1_LPI23.29-30_cid9_subsidy-DEFAULT_CFC
The phone was changed back, but data doesn't work. I can't access wifi because as soon as I switch it on, it switches back off. 4G, etc is not working either. So after trying to figure that out I decided to just proceed and put TWRP/superSU on the phone.
I powered off the phone. Powered into fastboot mode connected the phone to my computer.
I opened Minimal fastboot folder and shift/right click to bring up the command prompt.
In the command promt i typed fastboot devices and it shows my phone.
I then type fastboot flash recovery (file name or renamed to recovery or renamed to TWRP or I click the actual file and drag it to the command prompt) and then hit enter.
It says it's doing stuff in so many seconds, but after nothing happens. The phone doesn't reset like some of the videos. If I reset it, it powers on, but not into the TWRP screen.
After that I did more reading and found out that adb doesn't always play nice with windows 8.1 and that you might need to force other drivers to make it work right. I did this next and was going to try all the available options from universal naked driver later, but there were no motorola drivers.
Then I came here and learned something new. ADB devices command doesn't work when the phone is in fastboot mode so that has no effect on installing twrp...
Right now I am considering trying to install the other stock files I have access to:
SURNIA_ACG_LTE_5.1_LPI23.29-20_cid9_subsidy-DEFAULT_CFC (20 instead of 30).
After that I am out of ideas if it's not the adb problem. Might kingroot again and go from there.
Ok after researching, it seems that LTE file may not work on sprint and there was success using the boost file from
http://www.filefactory.com/file/6be...XI22.50-14.8_cid9_subsidy-DEFAULT_CFC.xml.zip
(2 hour dl make that 5+ lol)
http://forum.xda-developers.com/moto-e-2015/help/sprint-backup-moto-e-2nd-xt1526-cdma-t3099670
I'll try that next to get the wifi working and then figure out why it won't root.
Thx!
L8Show said:
Edit: I'm running Windows 8.1 and that is probably the problem. I need find some universal drivers that work for win8.1 with the moto e.
Hi,
I decided to try to root a recently acquired Moto E (XT1526/5.1) and got it unlocked easily enough by following directions online. I have downloaded the motorola usb drivers, TWRP, Android SDK, SuperSU, and tried different versions.
After following the unlock guide, it says DEVICE IS UNLOCKED. STATUS: CODE 3
I open the command prompt in platform-tools and enter fastboot flash recovery recovery.img (file was renamed), and it shows it's sending recovery OK, writing recovery OK, and finished.
After that things don't progress, and there are options that I can scroll through:
Restart Bootloader...
Power off...
Factory Mode - resets it to fac settings I think
Bar Codes...
BP Tools?
QCOM?
Bootloader Logs...
Start - does the warning that it's unlocked and then starts the phone.
Reocvery Mode - flashes the unlocked warning and nothing else. It goes back to fastboot flash screen.
Guides show it going to TWRP screen after running the command prompt, and then options to load up files.
Am I missing something?
TIA
Click to expand...
Click to collapse
Copy the twrp file in the sdk root file(right click the desktop icon and open file loaction ) and rename it as recovery
next step on that folder press shift button and right click and choose option open command window here. and type follwiong command without quotes and press enter "fastboot flash recovery recovery.img" this will flash the twrp onto ur moto e
---------- Post added at 05:30 AM ---------- Previous post was at 05:29 AM ----------
rakeshwipr said:
Copy the twrp file in the sdk root file(right click the desktop icon and open file loaction ) and rename it as recovery
next step on that folder press shift button and right click and choose option open command window here. and type follwiong command without quotes and press enter "fastboot flash recovery recovery.img" this will flash the twrp onto ur moto e
Click to expand...
Click to collapse
and open the command prompt with admin rights
Okay dude first of all get rid of those videos (no offense to youtubers).
Check if your device shows up in adb devices. (When phone is on)
Check if your device shows up in fastboot devices (When phone is in fastboot mode)
If both of them shows positive then your setup is fine. Now move on to next part.
Get the right stock image for your device.
Go to your about phone in settings and match with your build/build number. (or give me a screenshot of your about phone and I'll find it for you)
Avoid using any kind of batch file(If you don't know what's there inside) and try to flash manually one by one.
After that flash your twrp recovery.
When this is completed use volume buttons on your phone to get to "Recovery" options in fastboot mode then press power button to boot into recovery.
You'll successfully boot into recovery then from there flash SuperSU. Avoid using kingroot.
The reason your wifi/data stopped working is because of the wrong boot.img(kernel). Since you've flashed the boot.img of same phone but different variant, you were able to turn on your phone. If it had any wrong boot.img your phone wouldn't have turned on anyway.
-z3r0- said:
Okay dude first of all get rid of those videos (no offense to youtubers).
Check if your device shows up in adb devices. (When phone is on)
Check if your device shows up in fastboot devices (When phone is in fastboot mode)
If both of them shows positive then your setup is fine. Now move on to next part.
Get the right stock image for your device.
Go to your about phone in settings and match with your build/build number. (or give me a screenshot of your about phone and I'll find it for you)
Avoid using any kind of batch file(If you don't know what's there inside) and try to flash manually one by one.
After that flash your twrp recovery.
When this is completed use volume buttons on your phone to get to "Recovery" options in fastboot mode then press power button to boot into recovery.
You'll successfully boot into recovery then from there flash SuperSU. Avoid using kingroot.
The reason your wifi/data stopped working is because of the wrong boot.img(kernel). Since you've flashed the boot.img of same phone but different variant, you were able to turn on your phone. If it had any wrong boot.img your phone wouldn't have turned on anyway.
Click to expand...
Click to collapse
d
Thanks! The devices shows up when on as ADB and in fastboot too. I had to take a break when the kernel download took 8 hours, but I think I got the file that will work to fix the wifi issue. I can't mess with it til I get home tomorrow, but I will read and follow all advice.
For the previous poster, I did do the admin rights and did rename TWRP file to recovery... I aslo tried many other combinations, but will keep it in mind for all further attempts.
Appreciate the help so far. I almost left it with the kingroot, but it was bugging me that I couldn't get it to go. Hopefully I'll have good new tomorrow.
-z3r0- said:
Okay dude first of all get rid of those videos (no offense to youtubers).
Check if your device shows up in adb devices. (When phone is on)
Check if your device shows up in fastboot devices (When phone is in fastboot mode)
If both of them shows positive then your setup is fine. Now move on to next part.
Get the right stock image for your device.
Go to your about phone in settings and match with your build/build number. (or give me a screenshot of your about phone and I'll find it for you)
Avoid using any kind of batch file(If you don't know what's there inside) and try to flash manually one by one.
After that flash your twrp recovery.
When this is completed use volume buttons on your phone to get to "Recovery" options in fastboot mode then press power button to boot into recovery.
You'll successfully boot into recovery then from there flash SuperSU. Avoid using kingroot.
The reason your wifi/data stopped working is because of the wrong boot.img(kernel). Since you've flashed the boot.img of same phone but different variant, you were able to turn on your phone. If it had any wrong boot.img your phone wouldn't have turned on anyway.
Click to expand...
Click to collapse
Device shows up in both instances.
It's stock now and the wifi works. Flashed it back to stock by following Mdkcheatz guide here:
http://forum.xda-developers.com/moto-e-2015/help/sprint-backup-moto-e-2nd-xt1526-cdma-t3099670
I'm stuck where I was when I first started this thread. I've set my account up as administrator. Developer is enabled and so is USB debugging. I downloaded 2 different TWRP Condor files (3.0 and 2.7). I tried both and renamed them recovery just in case.
I confirmed the connection:
fastboot devices
I try to flash it with the:
fastboot flash recovery recovery.img
It says:
target reported max download size of 268435456 bytes
sending 'recovery' (6928 KB)...
OKAY [ 0.359s]
writing 'recovery'...
OKAY [ 0.359s]
finished total time: 0.578s
C: |Program Files (x86)\Minial ADB and Fastboot>
I'm running windows 8.1 (64 bit). I read that some people had had problems with windows 8. Kingroot worked through the app store. It has been flashed with various stock kernels and that usually takes a few minutes so I don't think it's doing much in half a second. I'll research a bit more, but I think it just a bad combination of this version phone and windows 8.1.
I started the phone after this last attempt. Are there any files in internal storage that I should look for?
L8Show said:
I downloaded 2 different TWRP Condor files (3.0 and 2.7). I tried both and renamed them recovery just in case.
Click to expand...
Click to collapse
Flashed the wrong recovery dude. You're flashing twrp of condor.
Here's this might work for you : http://forum.xda-developers.com/devdb/project/?id=10398#downloads
After done flashing. Open recovery mode and flash SuperSU.
Also I don't think there's any problem with windows 8.1
As long as you're opening cmd with admin rights and adb/fastboot commands are working for you everything's fine.
-z3r0- said:
Flashed the wrong recovery dude. You're flashing twrp of condor.
Here's this might work for you : http://forum.xda-developers.com/devdb/project/?id=10398#downloads
After done flashing. Open recovery mode and flash SuperSU.
Also I don't think there's any problem with windows 8.1
As long as you're opening cmd with admin rights and adb/fastboot commands are working for you everything's fine.
Click to expand...
Click to collapse
Just in time for Easter! You are correct. TYVM! I'm in TWRP and have to see about read only option again (read about it a week ago, I think it said to leave initially). SuperSU is next and then off to the races.
L8Show said:
Just in time for Easter! You are correct. TYVM! I'm in TWRP and have to see about read only option again (read about it a week ago, I think it said to leave initially). SuperSU is next and then off to the races.
Click to expand...
Click to collapse
Be sure to flash the latest SuperSU (the systemless one).
Here's the direct link:
http://download.chainfire.eu/supersu
-z3r0- said:
Be sure to flash the latest SuperSU (the systemless one).
Here's the direct link:
http://download.chainfire.eu/supersu
Click to expand...
Click to collapse
I am on v2.65. Should I use this version? I checked root and it's rooted, but I needed to use no bloat app (instead of free titanium) to remove some apps. Is that normal? I thought once rooted and set up, I would have complete control. Some apps seem very invasive so I haven't grabbed many yet. I have some questions about apps, etc., but will probably research and ask in another forum if needed.
Thx again for all the help and pointing out my mistake.
Hi all!!
This is for all the people who managed to softbrick (or hardbrick) their Lenovo Tab 3 8' (TB3-850F) tablets!
All you will need link, at the end of the post. I don't know for how long it will be up, but you can use it for now.
By the way.... Should you find something useful here... please hit the thanks button in the end
A. Unbrick
This requires flashing a clean stock rom. You will need:
a. stock rom for the TB3-850F (Google is you friend )
b. Sp Flashtool (you can download from their official site). From there, also download the MediaTek USB VCOM drivers and Driver Auto Installer v1.1236.00 (or any latest version).
Steps:
1. Install the windows drivers you downloaded
Note : If you encounter problems installing Windows drivers in Windows 10, google how to install unsigned drivers in Win10
2. Open the folder you extracted SP Flashtool and run it as administrator.
3. Unzip the rom file you downloaded.
4. Inside the folder of your unzipped rom file, look for a file similar to XXXXXXXXXX_scatter_file.txt
5. Load this in the SP Flashtool (click downlad tab, then scatter loading, load this file in there. It should load your rom you will see some colours, etc...
The tricky part:
Assuming you have correctly installed the drivers:
1. turn off the device (well if bricked it is turned off all ready) just make sure, and in SP Flashtool click options and 'with battery'.
2. Click the green download button on SP Flashtool.
3. Hold down the Vol down key on your device and connect it to a usb port.
4. If you see a red line and continue to yellow, all is probably good! Don't let go of the vol - button until yellow line reaches 100%
B. Root and TWRP recovery
This requires that you have or download:
a. platform tools (adb and fastboot)
b. a twrp.img (image file) for the lenovo TB3-850F copied to external SD Card and platform tools folder (google is... useful )
c. latest supersu.zip (flashable) copied to an external SD CARD
d. busybox.apk
Steps:
1. Grab tablet, go to settings ---> about tablet ---> click version number 7 times to enable developer options
2. From settings again click developer options and enable OEM Unlocking and usb debugging
3. Navigate in the platform tools folder. While holding SHIFT right click and select open commandline here (or similar)
4. Connect tablet to PC and in the command line issue: adb devices
If a weird number shows up and says device on the left you are all good to continue.
5. Now on the command prompt again issue: adb reboot bootloader
Your tablet should now reboot to fastboot (big Android, laying down)
6. Issue command: fastboot oem unlock (also check tablet screen for confirmation)
Wait a little bit and reboot your tablet. (should work with holding the power key down for a little longer than 10 seconds. If not hold down volume key and power button for the same amount of time - tested and working)
**At this point it is ESSENTIAL to leave the tablet to fully boot. The bootloader unlock triggers a FACTORY RESET which you must leave to complete and set up your tablet from the beginning.
** It is also ESSENTIAL to complete the boot and set up cycle because, after the automatic factory reset you will need to RE-ENABLE developer options and usb debugging. Once you are done continue to 7.
7. In the platform tools folder copy the twrp.img (you should have downloaded earlier, check upwards... )
8. Open the command line again and type:
a. adb reboot bootloader
b. fastboot boot twrp.img
** This will load up TWRP recovery only for this boot time.
****BE EXTRA CAUTIUS TO -NOT- ALLOW twrp to make modifications. Essential! Should you do otherwise go back to how to unbrick your tablet.
9. Choose install, and install supersu.zip.
10. Choose reboot to system and allow complete boot cycle! Essential!
11. Your tablet should now be rooted. However to succesfully flash the twrp recovery you need to have Busybox installed. Download as .apk and install it (at the time of writing this I believe Busybox 54 is the latest version).
12. Once installed back to the windows terminal and issue:
a. adb reboot bootloader
b. fastboot boot twrp.img
ONCE AGAIN - DO -NOT- ALLOW twrp to make modifications!!!!!
13. From you external SD Card install twrp.img, select recovery when prompted.
14. Reboot to system and enjoy!!!!
Note : Install an app that makes it easy to boot to recovery. (I personally use root essentials - Trying the combination keys did nothing for me, or just poped up the chinese options menu. That does not mean the recovery has not been installed correctly. Booting to recovery from rootessential menu, boots straight to twrp)
All you will need and credits:
https://drive.google.com/drive/fold...ourcekey=0-SDvJaXtWWk-TY9B53ct8dw&usp=sharing (thanks button, thanks button, thanks button!!! )
Results:
(it is in Greek, but you get the idea )
Hope I have helped! Happy playing with the commands and whole process! :good:
Lastly, if you get stuck at any point, you can either use this thread or PM me for further advice, explanation and/or any kind of assistance.
Note: Special thanks to @MotoJunkie01 for actually taking the time to further help people on this thread, as unfortunately I do not currently have the time to do so myself. It is worth checking out @MotoJunkie01 's threads also. There, you can find very useful and updated information.
r&xp said:
Hi all!!
This is for all the people who managed to softbrick (or hardbrick) their Lenovo Tab 3 8' (TB3-850F) tablets!
If you find it useful, just hit thanks in the end
A. Unbrick
This requires flashing a clean stock rom. You will need:
a. stock rom for the TB3-850F (Google is you friend )
b. Sp Flashtool (you can download from their official site). From there, also download the MediaTek USB VCOM drivers and Driver Auto Installer v1.1236.00
Steps:
1. Install the windows drivers you downloaded
2. Open the folder you extracted SP Flashtool and run it as administrator.
4. Unzip the rom file you downloaded.
4. Inside the folder of your unzipped rom file, look for a file similar to XXXXXXXXXX_scatter_file.txt
5. Load this in the SP Flashtool (click downlad tab, then scatter loading, load this file in there. It should load your rom you will see some colours, etc...
The tricky part:
Assuming you have correctly installed the drivers:
1. turn off the device (well if bricked it is turned off all ready) just make sure, and in SP Flashtool click options and 'with battery'.
2. Click the green download button on SP Flashtool.
3. Hold down the Vol down key on your device and connect it to a usb port.
4. If you see a red line and continue to yellow, all is probably good! Don't let go of the vol - button until yellow line reaches 100%
B. Root and TWRP recovery
This requires that you have or download:
a. platform tools (adb and fastboot)
b. a twrp.img (image file) for the lenovo TB3-850F copied to external SD Card and platform tools folder (google is... useful )
c. latest supersu.zip (flashable) copied to an external SD CARD
d. busybox.apk
Steps:
1. Grab tablet, go to settings ---> about tablet ---> click version number 7 times to enable developer options
2. From settings again click developer options and enable OEM Unlocking and usb debugging
3. Navigate in the platform tools folder. While holding SHIFT right click and select open commandline here (or similar)
4. Connect tablet to PC and in the command line issue: adb devices
If a weird number shows up and says device on the left you are all good to continue.
5. Now on the command prompt again issue: adb reboot bootloader
Your tablet should now reboot to fastboot (big Android, laying down)
6. Issue command: fastboot oem unlock (also check tablet screen for confirmation)
Wait a little bit and reboot your tablet.
**At this point it is ESSENTIAL to leave the tablet to fully boot. The bootloader unlock triggers a FACTORY RESET which you must leave to complete and set up your tablet from the beginning.
** It is also ESSENTIAL to complete the boot and set up cycle because, after the automatic factory reset you will need to RE-ENABLE developer options and usb debugging. Once you are done continue to 7.
7. In the platform tools folder copy the twrp.img (you should have downloaded earlier, check upwards... )
8. Open the command line again and type:
a.adb reboot bootloader
b.fastboot boot twrp.img
** This will load up TWRP recovery only for this boot time.
****BE EXTRA CAUTIUS TO -NOT- ALLOW twrp to make modifications. Essential! Should you do otherwise go back to how to unbrick your tablet.
9. Choose install, and install supersu.zip.
10.Choose reboot to system and allow complete boot cycle! Essential!
11.Your tablet should now be rooted. However to succesfully flash the twrp recovery you need to have Busybox installed. Download as .apk and install it (at the time of writing this I believe Busybox 54 is the latest version.
12.Once installed back to the windows terminal and issue:
a.adb reboot bootloader
b.fastboot boot twrp.img
ONCE AGAIN - DO -NOT- ALLOW twrp to make modifications!!!!!
13. From you external SD Card install twrp.img, select recovery when prompted.
14. Reboot to system and enjoy!!!!
Note 1: Install an app that makes it easy to boot to recovery. (I personally use root essentials - Trying the combination keys did nothing for me, or just poped up the chinese options menu. That does not mean the recovery has not been installed correctly. Booting to recovery from rootessential menu, boots straight to twrp)
Note 2: If you encounter problems installing Windows drivers in Windows 10, google how to install unsigned drivers in Win10
I apologize for not being able to post links, but I believe the required software is not particularly hard to find.
Hope I have helped! Happy playing with the commands and whole process! I will continue to help as much as I can :good:
Click to expand...
Click to collapse
Good guide. This tablet has temperamental steps involved with custom recovery and root. This guide gives a good outline of those steps. Here is a link to my thread for Stock Android 6.0 firmware for this tablet for members who need a stock ROM.
https://forum.xda-developers.com/android/general/rom-lenovo-tab-3-8-tb3-850f-android-6-0-t3593043
---------- Post added at 09:08 PM ---------- Previous post was at 09:06 PM ----------
Sorry, didn't mean to quote the entire OP....
MotoJunkie01 said:
Good guide. This tablet has temperamental steps involved with custom recovery and root. This guide gives a good outline of those steps. Here is a link to my thread for Stock Android 6.0 firmware for this tablet for members who need a stock ROM.
https://forum.xda-developers.com/android/general/rom-lenovo-tab-3-8-tb3-850f-android-6-0-t3593043
---------- Post added at 09:08 PM ---------- Previous post was at 09:06 PM ----------
Sorry, didn't mean to quote the entire OP....
Click to expand...
Click to collapse
Thank you, I appreciate your comment. I was really enthusiastic to read that you are working on a pure Stock Android 6.0 ROM for this device! Will definitely be waiting for that!
Thank you again!
r&xp said:
Thank you, I appreciate your comment. I was really enthusiastic to read that you are working on a pure Stock Android 6.0 ROM for this device! Will definitely be waiting for that!
Thank you again!
Click to expand...
Click to collapse
Thank you for the encouragement. I am in hopes that we can eventually get a dedicated device forum for the tb3-850f. I truly believe this tablet has the potential for plenty of future development.
@r&xp I love you so much, I was in the same predicament as you and you helped get my tablet running again. Just wanted to mention, I had to hold volume down when plugging in the USB for the SPFT step instead of volume up. THANK YOU AGAAAAAAAAAAIN <3
Rimmir said:
@r&xp I love you so much, I was in the same predicament as you and you helped get my tablet running again. Just wanted to mention, I had to hold volume down when plugging in the USB for the SPFT step instead of volume up. THANK YOU AGAAAAAAAAAAIN <3
Click to expand...
Click to collapse
Thanks for the comment!!! :silly:
Glad it worked for you. Isn' t it like a really good feeling when you actually see your bricked device boot correctly for the first time after you had almost deemed it unusable???
(also... a... small request... could you please click on that thingy... you know... that ehhh... thanks button??? :angel::angel:)
Just an update, since damaging my TB3-850F, I have since ordered another unit from Office Depot which is due to be delivered Monday or Tuesday. Once it arrives, I'll finish my TWRP flashable stock 6.0 ROM for this device and start back on the modified stock ROM.
r&xp said:
Thanks for the comment!!! :silly:
Glad it worked for you. Isn' t it like a really good feeling when you actually see your bricked device boot correctly for the first time after you had almost deemed it unusable???
(also... a... small request... could you please click on that thingy... you know... that ehhh... thanks button??? :angel::angel:)
Click to expand...
Click to collapse
Lol yessir, thanked!
MotoJunkie01 said:
Just an update, since damaging my TB3-850F, I have since ordered another unit from Office Depot which is due to be delivered Monday or Tuesday. Once it arrives, I'll finish my TWRP flashable stock 6.0 ROM for this device and start back on the modified stock ROM.
Click to expand...
Click to collapse
Looking forward to it. I picked mine up from walmart just yesterday for using as a google maps/car media center
My Lenovo Tab 3 replacement finally arrived in the mail. I'll be picking up where I left off on compiling both unmodified stock and custom stock-based ROMs for this tablet.
On my modified stock based ROM, I'm considering the implementation of Substratum (Root Ver) for theming, but I would like to get the input of other device owners first. So far, I have debloated, deodexed and zipaligned the OS. I am including the modified/patched boot image with SuperSU v2.79 SR3 binaries installed for systemless root, Nova Launcher, Pixel Icon Pack, BusyBox v1.26.2 binaries pre-injected in /su/xbin/, and Kernel Adiutor-Mod installed in /system/apps/ for user defined adjustments to the stock kernel and governors.
You guys please give me input on what you would like included in the ROM. Thanks
r&xp said:
Hi all!!
This is for all the people who managed to softbrick (or hardbrick) their Lenovo Tab 3 8' (TB3-850F) tablets!
Click to expand...
Click to collapse
I had a Lenovo Tab3 that bricked during the initial set up and this saved me for having an expensive paperweight! The process worked like a charm. You ROCK!
chienfou said:
I had a Lenovo Tab3 that bricked during the initial set up and this saved me for having an expensive paperweight! The process worked like a charm. You ROCK!
Click to expand...
Click to collapse
Really glad it worked for you!!!
Thumbs up! :good::good:
load the scatter file .txt in SP Flashrom is OK ... it show me purple color until finish loading the file.
but how come when I hit the green button Download, it seems like nothing downloading,
thanks God, and thank you so muchhh muchhh muchhh for saving my tablet... after 2 days struggling with this brick
thank you the topic thread and MotoJunkie01 led me here :crying::fingers-crossed:
yiukiang said:
thanks God, and thank you so muchhh muchhh muchhh for saving my tablet... after 2 days struggling with this brick
thank you the topic thread and MotoJunkie01 led me here :crying::fingers-crossed:
Click to expand...
Click to collapse
Try again to get TWRP installed to your /recovery partition or, alternatively, try to simply boot into TWRP from fastboot with the fastboot boot twrp.img command. It is common for members to experience some difficulty in installing custom recovery on this device. It has been my experience that most members are successful the second time around.
Thanks MotorJunkie!! But mine after was saved from brick from this thread, i was rooted it also by your instructions from other thread.. Now the gps from GoogleMap doesn't determine the location (even the location already turned on ) ... Plus i couldn't check the systemupdate ( it says connection network failed even i was connecting to wifi already) ...
What should i do, or do you know how to fix it?
yiukiang said:
Thanks MotorJunkie!! But mine after was saved from brick from this thread, i was rooted it also by your instructions from other thread.. Now the gps from GoogleMap doesn't determine the location (even the location already turned on ) ... Plus i couldn't check the systemupdate ( it says connection network failed even i was connecting to wifi already) ...
What should i do, or do you know how to fix it?
Click to expand...
Click to collapse
System updates (OTAs) won't install on rooted operating systems. To install an OTA, you must have unmodified stock /boot, /system, and /recovery partitions installed. On the GPS issue, go to Settings, Apps, and ensure Google Maps has been granted location access permission.
Hi ...
I followed this guide but during the unbricking' I unplugged the device from USB (since I could not see any input on device or indication in SP Flash Tool).
Now the device will not turn on at all (previously I would see the Lenovo Logo splash screen but then it would just stay at this screen. Now i do not see anything).
When I plug into computer by USB, it causes my computer to freeze up (Windows 10).
Any ideas or is this now completely bricked? (hard bricked).
xavier234 said:
Hi ...
I followed this guide but during the unbricking' I unplugged the device from USB (since I could not see any input on device or indication in SP Flash Tool).
Now the device will not turn on at all (previously I would see the Lenovo Logo splash screen but then it would just stay at this screen. Now i do not see anything).
When I plug into computer by USB, it causes my computer to freeze up (Windows 10).
Any ideas or is this now completely bricked? (hard bricked).
Click to expand...
Click to collapse
It sounds like a hard brick. I can't speak for the OP, @r&xp on this, so you may want to get his advice. Have you tried the OP's methods of using your hardware buttons for forcing the device into adb/fastboot recognition? I think this is your only chance of recovering it. By it not powering on, from my experience, a bootloader or bootloader dependent partition has been corrupted, thus hard bricking the tablet.
MotoJunkie01 said:
It sounds like a hard brick. I can't speak for the OP, @r&xp on this, so you may want to get his advice. Have you tried the OP's methods of using your hardware buttons for forcing the device into adb/fastboot recognition? I think this is your only chance of recovering it. By it not powering on, from my experience, a bootloader or bootloader dependent partition has been corrupted, thus hard bricking the tablet.
Click to expand...
Click to collapse
Hello, I'll weigh in on this one. There are multiple threads above the TB3-850F on this forum and also another forum.
I initially followed a different thread and instructions which caused my problem. Notably do not allow TWRP write access !!! This mistake caused the soft-brick.
Anyone following any other advice about TB3-850F or downloading any other image BEWARe. Only follow the advice in this thread by r&xp:
https://forum.xda-developers.com/android/help/lenovo-tab-3-8-tb3-850f-unbrick-root-t3598727
Following this advice I now restored original image and then rooted in just a few hours.. Thank you r&xp for the good advice. :laugh:
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step
lets get to it
place the magisk.apk and the stock boot.img
in the internal memory of your phone (downloads)
if you like to keep stuff organized :good:
3-step
follow the vídeo tutorial and use magisk manager
to patch your stock boot.img it will output a new
boot.img that includes magisk Root (patched_boot.img)
https://www.youtube.com/watch?v=BF4_hnKgjFA
ps: major ty to hovatek team for this great tutorial
step-4 use Google drive or usb OTG to get the patched_
boot.img to your PC and place it in the ADB folder
once you have oem(bootloader) unlocked just
rename the patched_boot.img to boot.img
step-5
unlock oem, these qilive devices wont unlock
the bootloader even if you enable it in DEV options
enable USB debug in dev options
you will need to use ADB commands
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot oem unlock
(MAJOR WARNING the fastboot
oem unlock will wipe/reset/factoryreset/delete your data)
after you give the command small letters will appear
on the phone screen(yes or no) hard to read dont be hasty plz
use VOLUME+ to select and VOLUME - to confirm
note: when my phone ended the unlock it whent back to
that black screen where you choose fastboot-recovery-restart
and was stuck there, side keys did nothing if this happens
just long press the power key for 10 sec it will shutdown
then press power again to turn on
first boot after unlock will take longer then normal dont freakout
after you unlock small letters will appear during boot up saying the device
is not safe unlocked ,you can later use ( fastboot oem lock )
step-6
flash the patched boot.img with ADB
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot flash boot boot.img
finished/ok
command- fastboot reboot
and voila you should now have magisk
installed in the app drawer, open it!!
step-7 run the install one final time from the
magisk manager and install magisk V16 using
recomended option it will verify/patch the boot image
Do NOT select the AVB 2.0 BOX it will bootloop the phone
and your done, enjoy your qilive rooted phone.
from this point on you can use the fastboot
command- fastboot oem lock
to remove the letters in boot up about the
device not safe unlocked
WARNING oem lock
will WIPE/FACTORY RESET again (god damn it!!)
ps: i had to install twice in a row,major pain in the ....
Repeat step 7 after Wipe/Reset
here is the stock boot for 2 qilive models
you can get the stock firmware for any qilive
at this site www.doc-doapi.com/EM/qilive/smartph...te_3m-fdd-cs_mul_20170818-110645_songlixin_PC
and get the recovery or boot from the unpacked firmware file
ps:my phone is the Q8SIN4GP AND ITS WORKING FINE
A VERY SPECIAL TY to topjohnwu (magisk creator), this man is nothing
short of a God damn genius!! , and if you can donate to him.
hope this helps other qilive users to root:highfive:
quick note on the qilive models, they have two model names
the cliente name in my case Q8SIN4GP
and the factory name in my model its 882912
in order to download the right firmware for your model
you need the factory model witch is what appears in the qilive
site above, it will be in the back of the phone or the original
box on a sticker just bellow the bar code, full model exempl
:Q8SIN4GP/882912 my firmware serves several models,
these Q8 models all start with 88xxxx WARNING
dont try this using the wrong firmware/boot file or you will DAMAGE your phone
Help with BOOTLOOP problems, if you find your self stuck in a bootloop
the phone wont go past the qilive logo and just stays there, dont freak out
you will loose your data but there is a way out
just keep pressing power + Volume up until a black screen with 3 options appears
when it does let go, use Volume + to select option and Volume - to confirm
select Fastboot or alternative select recovery and then select reboot to bootloader
both option will place your phone in Fastboot mode, once in fastboot mode
connect your phone to PC and use ADB commands to fix/bootloop
command- fastboot devices
serial appears
command- fastboot oem unlock (skip this if you use phone unlocked)
a confirm action option appears on the phones screen
use Volume up to say YES / or Volume Down to say NO
Warning oem unlock will WIPE/Factory reset your phone
once it finishes the phone will be stuck on the
Recovery/fastboot/restart screen just long press the power key
until the phone shuts down
start the phone again using Power + Volume up when the black
screen with the 3 options come up, let go and use Volume up to
select Fastboot mode and confirm using Volume Down
Once in fastboot connect your phone to PC and use ADB commands
command- fastboot devices
serial apears
Here you will flash the magisk patched_boot.img
the same image you used to root your phone
command- fastboot flash boot boot.img
it will say finished-ok (or similar)
command- fastboot reboot
the boot up time will be longer than normal
but the phone should now complete the boot
and present the inicial setup screen, select language
enter your mail, the usual bla bla...
any way at this point just repeat step 7
to get root running again
sp flash tools v5.1716.
phonedriller said:
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step....
Click to expand...
Click to collapse
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
Awsome work congrats, as for the recovery so far no luck so try not to go 2 crazy until a working recovery is up and working , install stericsons busy box this is always the first root app i install
If possible buy sterics busybox pro and titaniumbackup pro if you want to install apps to sd card apps2sd pro all of these can be tested in free
Version,again nice work congrats enjoy you rooted phone :highfive:
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
phonedriller said:
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
Click to expand...
Click to collapse
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
xdacktheresianum said:
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
Click to expand...
Click to collapse
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
phonedriller said:
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
Click to expand...
Click to collapse
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
xdacktheresianum said:
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
phonedriller said:
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
Click to expand...
Click to collapse
thank you, phonedriller
everything worked perfectly via SPFlash Tool.
and, referring back to our above questions re the possibility of getting TWRP onto the phones, a developer friend of mine writes me this:
>try to flash TWRP:
>Download following files from this link:
>https://mega.nz/#F!qZIgnJRK!5apBfYo1je0ytg-wmA6JMQ
>- Odin3 v3.12.3 (Complete folder)
>- twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>1. Start your Phone into download mode
>2. Start Odin (Odin3 v3.12.3\Odin3.exe)
>3. Click on Options and unmark Auto Reboot
>4. Click AP and select twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>5. Press Start and wait until finished (Reset or OK!)
>6. Restart your phone immediatly to recovery mode
>7. In TWRP Recovery click on mount
>8. Set the checkbox checked at system (that system is mounted)
>9. go back and click on advanced
>10. Open file manager
>11. navigate to system/build.prop and click on build.prop
>12. Click on chmod
>13. type: 0644 and hit the accept button on screen or at the virtual
>keyboard on your phone
>14. restart your phone
i haven't tried this, but am wondering whether it might seem "reasonably possible" when reading through it.
thanks
ckth
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
tommo1982 said:
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
Click to expand...
Click to collapse
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
I had issues with adds being displayed at home screen and I was not able to close them. I had to use NetGuard to find that FOTA talks to 'adsup' and it is a known malware provider. I learned that some of the system apps try to talk with Alibaba servers and AdOppo (whatever it's called). Kaspersky might not be wrong, actually.
I'm trying to download stock firmware, but I don't know the file name. The website with it is locked, so unless I know exactly what I need, I cannot download it.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
phonedriller said:
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
Click to expand...
Click to collapse
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
Ps use root + apps2sd or titaniumbackup to stop/disable the bad apps and replace them with playS app,not possible on all apps of course
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
tommo1982 said:
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
Click to expand...
Click to collapse
Flashing is super easy use spflashtools or. Odin compiling a Rom is not , were you able to get the original firmware? You will need the original firware to get the boot and partition info from what i read so far
Unfortunately not. I will ask at the shop where I bought it how to contact tech. It should be freely available. I don't understand why Qilive restricted access to firmware.
I'll post when I learn anything.
Well, you can download the firmware if you know the file name. The bad news is, it seems the stock firmware has malware preinstalled. If there is anyone who could help confirm it. I have the ROM, and I can upload it to Google Drive if needed.
Hi all,
I'm coming back to a question lingering since the very first post here and mentioned again in post #9:
Is there a successful way to install TWRP on this Qilive model?
Re this topic:
- has anybody tried/has anybody been successful with the procedure described in post #9?
and
- has anybody seen the following TWRP builders' version (do an in-page search on Q8S55IN4G2)
https://twrpbuilder.github.io/fr/downloads/twrp/
with the download belonging to it
https://androidfilehost.com/?fid=890129502657591798
???
any successful installations to report???
Wouldn't THAT be great!!??
thanks
xdack