Hi
Viper's audio is one of the great mod for audio enhancement... I recently installed ics(6.1.1.b.1.100) on my xperia u.
As per instructed in vipers forum , i installed the audio mod,. after installing, v4a was not working ,so i converted v4a app to system app and gave
rw-r--r permission ... after re-installing the driver luckily the mod started working:laugh:
But while playing the song , when i increase the volume above 70% the viper audio stops working and sound awesomeness gone . If i restart the player again viper audio starts processing (but under 70% volume) ..
plz Can any one help me ??? Is there any build.prop edit??
Thank you
Try uninstall the app first
1) Move it to system/app with rw-r-r(644) permission and reboot
2) Install the require driver and reboot
3) Choose the music effect in Settings/Sound as Viper 4 Android
4) Now trying to enable the v4a and playing the songs you like enjoy!
Tell me if this work!
Xperia_Fans said:
Try uninstall the app first
1) Move it to system/app with rw-r-r(644) permission and reboot
2) Install the require driver and reboot
3) Choose the music effect in Settings/Sound as Viper 4 Android
4) Now trying to enable the v4a and playing the songs you like enjoy!
Tell me if this work!
Click to expand...
Click to collapse
Thanks for the reply:good:
No, still i am facing the same problem
May be,, is there any thing to edit in "audio_effects.conf"????
arunkrisna said:
Thanks for the reply:good:
No, still i am facing the same problem
May be,, is there any thing to edit in "audio_effects.conf"????
Click to expand...
Click to collapse
Nope it doesn't needed, cause I'm using that audio mod also and it work perfectly
Xperia_Fans said:
Nope it doesn't needed, cause I'm using that audio mod also and it work perfectly
Click to expand...
Click to collapse
Then what else i can do with it?? Coz, if its driver problem , then it shouldn't be working right??
But its working and stops processing only after increasing volume,, If i am not wrong , changes should be done with some library functions ???
Without that mode ,i can't enjoy listening songs
Thank you
arunkrisna said:
Then what else i can do with it?? Coz, if its driver problem , then it shouldn't be working right??
But its working and stops processing only after increasing volume,, If i am not wrong , changes should be done with some library functions ???
Without that mode ,i can't enjoy listening songs
Thank you
Click to expand...
Click to collapse
Do you have other sound mod or apps u install to increase the volume of your phone?Or that just the Extra louds one in the settings of Viper apps?
Xperia_Fans said:
Do you have other sound mod or apps u install to increase the volume of your phone?Or that just the Extra louds one in the settings of Viper apps?
Click to expand...
Click to collapse
I am using sony's default player .. i don't have any third party application to enhance the sound ..
viper>phone speaker > extra loud - its disabled
arunkrisna said:
I am using sony's default player .. i don't have any third party application to enhance the sound ..
viper>phone speaker > extra loud - its disabled
Click to expand...
Click to collapse
if you enable it with just sight effect?
Xperia_Fans said:
if you enable it with just sight effect?
Click to expand...
Click to collapse
If i enable it, the volume get boosted up(external speaker),,,, the audio mod will be processing if i increase it to max volume..
That's fine but the problem is only with under headset option!!!???
:crying:
Related
Hi guys,
I just got a S3 (very happy so far), rooted with Omega 444 (amazing!). Anyway, UI used to use VolumeBoost to increase the volume on my HTC Desire for taking the noisy metro each morning. But it doesn't seem to work on the S3.
I used PowerAmp as my media player.
Any suggestions for the best app for boosting the volume? Ideally it should work without me having to open the app.
Thanks
broonage said:
Hi guys,
I just got a S3 (very happy so far), rooted with Omega 444 (amazing!). Anyway, UI used to use VolumeBoost to increase the volume on my HTC Desire for taking the noisy metro each morning. But it doesn't seem to work on the S3.
I used PowerAmp as my media player.
Any suggestions for the best app for boosting the volume? Ideally it should work without me having to open the app.
Thanks
Click to expand...
Click to collapse
dont know how volumeboost works, but in combination with poweramp most of the time you have to disable dvc in poweramp settings in order to get sound mods to work
broonage said:
Hi guys,
I just got a S3 (very happy so far), rooted with Omega 444 (amazing!). Anyway, UI used to use VolumeBoost to increase the volume on my HTC Desire for taking the noisy metro each morning. But it doesn't seem to work on the S3.
I used PowerAmp as my media player.
Any suggestions for the best app for boosting the volume? Ideally it should work without me having to open the app.
Thanks
Click to expand...
Click to collapse
Flash custom kernel Almost every kernel contains volume equalizer
verny94 said:
Flash custom kernel Almost every kernel contains volume equalizer
Click to expand...
Click to collapse
But beware that if you flash a custom kernel with EQ, verify that it doesn't interfere with the Poweramp's EQ or any other app you use. Sometimes, kernel's EQ can be quite sensitive, depending on what you chose.
Darkened_Sky said:
dont know how volumeboost works, but in combination with poweramp most of the time you have to disable dvc in poweramp settings in order to get sound mods to work
Click to expand...
Click to collapse
Thanks!! I'll have a play around with that!!
Ayleo said:
But beware that if you flash a custom kernel with EQ, verify that it doesn't interfere with the Poweramp's EQ or any other app you use. Sometimes, kernel's EQ can be quite sensitive, depending on what you chose.
Click to expand...
Click to collapse
verny94 said:
Flash custom kernel Almost every kernel contains volume equalizer
Click to expand...
Click to collapse
That's a bit hardcore for me...I'm a bit of a beginner concerning all things Flashing.
Lollipop Sound Enchantment
Hi Guys, here speak the maybe youngest Developer on XDA, I am only 15
I created a new Soundmod to improve sound
This Mod is only for Stock Lollipop (14.5.A.0.242) from Xperia Z Ultra
Installation Guide :
Reboot to recovery
Make a Nandroid Backup of your System
Flash this zip
Wipe Cache and Dalvik Cache
Reboot to system
This mod includes:
Dolby DAP (Works when you change your SELinux mode to permissive with Kernel Adiutor or SELinux Mode Changer, but the app is buggy sorry)
ASound
MaxxAudio
Harman Kardon
My Sampling Sound Mod
DSD and ALAC support
V1 Add-on released and includes :
XLoud
Fixed MaxxAudio
DSEE-HX
SRS FX
New modified mixer_paths.xml for a sound like a HTC
V2 Released and includes:
Full DSEE-HX for Z Ultra
(for working, add these string to Build.prop: ro.somc.dseehx.supported=true)
ALSA (384kHz 64bit) processing
SRS 3D Speaker and new Settings enabled
Beats Audio
V2 including V1 and V1 Add-on too
And thanks to my Friend Carla <3, who gave me the power to do this soundmod and more, who makes me happy every time, who helps me on bad times
I will never forget that, thank you so much...
You are so beautiful :angel:
Your the-cortana-project
Please do not blame me when my soundmod have too much bass,middle,trebble, I testing only with Sony MDR1 ADAC, MDR ZX600, Beats Solo HD (thanks much to Carla <3) and SMS Streets by 50 cent
The sound can be different on another headphones
Finally....will test this one out....nice work
the-cortana-project said:
Lollipop Sound Enchantment
Hi Guys, I created a new Soundmod to improve sound
This Mod is only for Stock Lollipop (14.5.A.0.242) from Xperia Z Ultra
Installation Guide :
Reboot to recovery
Make a Nandroid Backup of your System
Flash this zip
Wipe Cache and Dalvik Cache
Reboot to system
This mod includes:
Dolby DAP (Surround doesn't work, app is buggy, Please do not open this app, boost sound only)
ASound
MaxxAudio
Harman Kardon
My Sampling Sound Mod
DSD and ALAC support
This mod works perfectly with my another Soundmod: http://forum.xda-developers.com/xperia-z-ultra/general/soundmod-lollipop-volume-sound-mod-t3070954
And thanks to my Friend Carla <3, who gave me the power to do this soundmod and more, who makes me happy every time, who helps me on bad times
I will never forget that, thank you so much...
You are so beautiful :angel:
Your the-cortana-project
Click to expand...
Click to collapse
Hi, before i install your soundmod their is another soundmod i install first, project sonico audiomod...it had such a big file that i tempted to use it....it has the same dolby and maxxaudio file app..both working fine...then i flash your soundmod on top of sonico soundmod...suddenly maxxoudio doesnt work anymore...but the sound is amazing...is your dolby and maxxaudio the same as that and will their be conflict if i keep going on...
Will i have the maximum sound setting as you have...what is ypur recommendation...thanks..
martin132014 said:
Hi, before i install your soundmod their is another soundmod i install first, project sonico audiomod...it had such a big file that i tempted to use it....it has the same dolby and maxxaudio file app..both working fine...then i flash your soundmod on top of sonico soundmod...suddenly maxxoudio doesnt work anymore...but the sound is amazing...is your dolby and maxxaudio the same as that and will their be conflict if i keep going on...
Will i have the maximum sound setting as you have...what is ypur recommendation...thanks..
Click to expand...
Click to collapse
Okay, that is not good, I will fix that so fast I can
I use this setting for my speaker, very good bass and trebble, you see my settings on attachment, for Headphones I use Clearaudio+
the-cortana-project said:
Okay, that is not good, I will fix that so fast I can
I use this setting for my speaker, very good bass and trebble, you see my settings on attachment, for Headphones I use Clearaudio+
Click to expand...
Click to collapse
I've discovered this today, you have an ideo why sony audio setting wont work...
martin132014 said:
I've discovered this today, you have an ideo why sony audio setting wont work...View attachment 3307356
Click to expand...
Click to collapse
WTF.... Okay Wipe data of Audio Effect and of Dolby and reboot system
That is a new bug, on my device all works perfectly
the-cortana-project said:
WTF.... Okay Wipe data of Audio Effect and of Dolby and reboot system
That is a new bug, on my device all works perfectly
Click to expand...
Click to collapse
It seems i cant get it working...still show the same message....you think i can install this audio setting manually....
martin132014 said:
It seems i cant get it working...still show the same message....you think i can install this audio setting manually....
Click to expand...
Click to collapse
Yes, I have an another idea:
Disable Both Dolby Apps
Set your go to audio effects and set the equalizer
If you are finished, reactivate Both Dolby Apps
Reboot system
the-cortana-project said:
Yes, I have an another idea:
Disable Both Dolby Apps
Set your go to audio effects and set the equalizer
If you are finished, reactivate Both Dolby Apps
Reboot system
Click to expand...
Click to collapse
I think its not your mod...maybe its the rom im using....sorry to make a fuss....
@the-cortana-project
Why wont you moved your mod to Themes&Apps section....i think this mod don't get the attention it deserves....
martin132014 said:
@the-cortana-project
Why wont you moved your mod to Themes&Apps section....i think this mod don't get the attention it deserves....
Click to expand...
Click to collapse
I have a better idea, I make a split thread for my mod, that is easier than move it to themes and apps section
I flashed the Sound Enhancement Mod and everything seems to work fine.
At first, I thought that the base is too much until I enabled ClearAudio+
Thank you very much for this Mod and I can now enjoy my Sounds again after Lollipop update.
My question would be, what would be the difference if I install the Add-on? I know this is not required so I am thinking what would be the advantage of doing so?
BragaisG said:
I flashed the Sound Enhancement Mod and everything seems to work fine.
At first, I thought that the base is too much until I enabled ClearAudio+
Thank you very much for this Mod and I can now enjoy my Sounds again after Lollipop update.
My question would be, what would be the difference if I install the Add-on? I know this is not required so I am thinking what would be the advantage of doing so?
Click to expand...
Click to collapse
I tested Clearaudio + with my Sony MDR1 ADAC and the bass is for me not too much:laugh:
My Add-on enables Xloud, DSEE-HX, boosts speaker volume,... my Add On is not recommended but it enchanting the sound a little bit more
the-cortana-project said:
I tested Clearaudio + with my Sony MDR1 ADAC and the bass is for me not too much:laugh:
My Add-on enables Xloud, DSEE-HX, boosts speaker volume,... my Add On is not recommended but it enchanting the sound a little bit more
Click to expand...
Click to collapse
Thank you for the quick reply.
I guess it all boils down to music preference in the end but no complains here.
Earphones are sounding better now but I haven't tried on speaker. Currently still at the office.
the-cortana-project said:
I tested Clearaudio + with my Sony MDR1 ADAC and the bass is for me not too much:laugh:
My Add-on enables Xloud, DSEE-HX, boosts speaker volume,... my Add On is not recommended but it enchanting the sound a little bit more
Click to expand...
Click to collapse
I installed the add on so how exactly do I access those extra features or is it by default? The only thing I have access to is the Dolby app.
Thanks
shaolin95 said:
I installed the add on so how exactly do I access those extra features or is it by default? The only thing I have access to is the Dolby app.
Thanks
Click to expand...
Click to collapse
Is enabled by default, you have only access to Dolby
I have a new Setting for Equalizer for Beats Solo HD :
See pic on attachment
V2 will come with:
ASound 384kHz 64bit ALSA enchanting
Beats Audio
SRS 3D Speaker and new Settings enabled
Here new Equalizer settings for Sony MDR ZX600 :
See pic on attachment
V2 will als iinclude:
Hearing Protection
Maybe Soundaura
MaxxAudio Waves
Audio_policy.conf High Sampling (384kHz 32 bit) Boosted from ALSA to (384kHz 64bit)
V2 will upload today: DSEE-HX IS NOT MORE ONLY A FEATURE FOR Z3 AND Z2
See pic on attachment
Description
So when listening to music through the player and when an incoming call is connected speaker that creates a stereo effect. In theory this is compatible with Viper FX and other to sound i think that this patch must be suitable for CM13 and roms based on it )))
Installing
Downloading and install script via recovery, oh yeah do a backup or copy your mixer_paths to something which is located in /system/etc
Does it kill the speaker?
I think for many the question arises - it will not kill you this mod speaker ??? What can I say like this modes have in Nexus's threads and some of Sony's threads . When I enjoyed Nexus 5 my speaker was not killed and the reports of these cases I have not seen, you can do to look / ask around in different themes where there is such modes, but as always - Install this at your own risk because anything can happen
Original post on 4pda
Contributor
yaruk13
Dr. Ramm said:
Description
So when listening to music through the player and when an incoming call is connected speaker that creates a stereo effect. In theory this is compatible with Viper FX and other to sound i think that this patch must be suitable for CM13 and roms based on it )))
Installing
Downloading and install script via recovery, oh yeah do a backup or copy your mixer_paths to something which is located in /system/etc
Does it kill the speaker?
I think for many the question arises - it will not kill you this mod speaker ??? What can I say like this modes have in Nexus's threads and some of Sony's threads . When I enjoyed Nexus 5 my speaker was not killed and the reports of these cases I have not seen, you can do to look / ask around in different themes where there is such modes, but as always - Install this at your own risk because anything can happen
Original post on 4pda
Contributor
yaruk13
Click to expand...
Click to collapse
after installing this my status bar icon vanished
krishsns said:
after installing this my status bar icon vanished
Click to expand...
Click to collapse
which rom?
Dr. Ramm said:
which rom?
Click to expand...
Click to collapse
Cm13
Sent from my MI 3W using Tapatalk
Viper and Dolby Atmos Flashable Zip. Download : https://www.androidfilehost.com/?fid=889764386195898564
Can you provide zip for removing this Viper and Dolby Atmos
shubham1358 said:
Can you provide zip for removing this Viper and Dolby Atmos
Click to expand...
Click to collapse
Why what happened?
RoguishOfficial said:
Why what happened?
Click to expand...
Click to collapse
Both of them are not working
shubham1358 said:
Both of them are not working
Click to expand...
Click to collapse
Viper4Android​ don't mix well with Dolby. Just clean flash viper and follow the steps in xda. Viper is a really good driver.
shubham1358 said:
Both of them are not working
Click to expand...
Click to collapse
Are you using permissive or enforcing in ROM?This mod needs permissive to work.
piku 123 said:
Are you using permissive or enforcing in ROM?This mod needs permissive to work.
Click to expand...
Click to collapse
Thanks! Viper is working with permissive
shubham1358 said:
Thanks! Viper is working with permissive
Click to expand...
Click to collapse
Great! good to know its working for you.
How to remove Viber Dolby atoms plez give zip
gautamp123 said:
How to remove Viber Dolby atoms plez give zip
Click to expand...
Click to collapse
Why do u want to remove just turn off everything
It's work great I m use lineage 13 nd that app work with permissive nd I was use selinuxmode changer for changing mode but some it's show that selinuxmode app is harmful ur device plezz install it's.... So what I can do
Thank me later. Viper settings for you from an engineer. Me!
For headphones turn these on:
Master Power
Playback Gain Control - Max it if your earphones are good
ViPER-DDC - I use the Audio Technica mk2 500 cuz I have them. You can use the same even on normal earphones. Still makes it better.
Field Surround - slightl level 5
Headphone Surround + level 2
ViPER Bass - boost at 50Hz by 14db
ViPER Clarity - 3.5db
For phone speaker just turned on extra loud it doesn't matter max it if your phone speakers don't start cracking. Adjust accordingly.
Don't use Dolby or any other sound modifier with Viper4Android. Disable MusicFX in system apps.
Is viper working with CDLA earphones?
aman.k.sharma.best said:
Is viper working with CDLA earphones?
Click to expand...
Click to collapse
Haven't tried it. Please try and let others know. Disable dobly and sound modifiers before installing Viper4Android. Should work fine but try it once.
RoguishOfficial said:
Haven't tried it. Please try and let others know. Disable dobly and sound modifiers before installing Viper4Android. Should work fine but try it once.
Click to expand...
Click to collapse
It doesn't work with CDLA. It shows -
Processing - No
Status - Abnormal
aman.k.sharma.best said:
It doesn't work with CDLA. It shows -
Processing - No
Status - Abnormal
Click to expand...
Click to collapse
Did you set permissive?if not then change it to permissive with linux se changer
how to disable
RoguishOfficial said:
Thank me later. Viper settings for you from an engineer. Me!
For headphones turn these on:
Master Power
Playback Gain Control - Max it if your earphones are good
ViPER-DDC - I use the Audio Technica mk2 500 cuz I have them. You can use the same even on normal earphones. Still makes it better.
Field Surround - slightl level 5
Headphone Surround + level 2
ViPER Bass - boost at 50Hz by 14db
ViPER Clarity - 3.5db
For phone speaker just turned on extra loud it doesn't matter max it if your phone speakers don't start cracking. Adjust accordingly.
Don't use Dolby or any other sound modifier with Viper4Android. Disable MusicFX in system apps.
Click to expand...
Click to collapse
How to disable dolby,musicfx etc
sandy_nsk said:
How to disable dolby,musicfx etc
Click to expand...
Click to collapse
Both can disabled under app management>show system app
Alternatively, if you're rooted, use system app remover.
---------- Post added at 07:40 PM ---------- Previous post was at 07:35 PM ----------
aman.k.sharma.best said:
It doesn't work with CDLA. It shows -
Processing - No
Status - Abnormal
Click to expand...
Click to collapse
You mean it doesn't work with cdla headphones?
BTW.. status should be normal and driver functioning in that case of too. Go to system>vendors>etc and put a .bak extension on the audioconfig file. Reboot and viper should work fine. These are supposed to be done before you install or flash Viper4Android.
Not working both... Dolby and Viper ... Using SE Linux permissive... Any suggestion?
piku 123 said:
Did you set permissive?if not then change it to permissive with linux se changer
Click to expand...
Click to collapse
Viper4Android is not compatible with CDLA earphones.
---------- Post added at 10:16 AM ---------- Previous post was at 10:14 AM ----------
RoguishOfficial said:
You mean it doesn't work with cdla headphones?
BTW.. status should be normal and driver functioning in that case of too. Go to system>vendors>etc and put a .bak extension on the audioconfig file. Reboot and viper should work fine. These are supposed to be done before you install or flash Viper4Android.
Click to expand...
Click to collapse
Viper4Android is not compatible with CDLA earphones.
Moved all of my development efforts from XDA.
Thanks for the hard work, I don't get this instal and reinstall? but please confirm the following:
Flash the op6_v5_stereomod in twrp,
Install AML from magisk,
Reboot.
Thanks for your help.
Thanks for your work!
There are applications that output sound depending on the proximity sensor (for example, watsapp, telegram). You turn on the voice message, bring the phone to your ear and the sound from the external speaker switches to conversational (that could be heard in public places).
Is it possible to implement it in your fashion or is it technically impossible?
Is it any difference between this
https://forum.xda-developers.com/oneplus-6/themes/magisk-stereo-speaker-mod-oneplus-6-t3814512
And u r mod
It literally says EXACTLY what the differences are in the main post dude!
- AML support
- Unity support
This basically means:
- This can work flawlessly with other audio mods.
- This can work with or without Magisk.
chrisaw said:
It literally says EXACTLY what the differences are in the main post dude!
- AML support
- Unity support
This basically means:
- This can work flawlessly with other audio mods.
- This can work with or without Magisk.
Click to expand...
Click to collapse
Try to create app like op5t stereo mod which helps to control sound parameters like mono, true stereo etc
Sorry to say this but providing any form of GUI or additions to the mod isn't really in the scope of what I set out to achieve here.
The code, however, is freely available on GitHub using the link from the main post - I'm more than happy for anyone to fork the code and add any additional functionality they wish to.
My aim here is simply to provide AML support so things like Atmos, ViPER, etc. can be used seamlessly alongside the mod. I also converted the mod to use "patch" instead of just overwriting the file and switched to Unity so that it could support being flashed directly for those not wishing to run Magisk.
Confirm this is working flawlessly together with ainur sauron & viper4android. Awesome mod for our device! Thank you very much!
bartjeh1991 said:
Confirm this is working flawlessly together with ainur sauron & viper4android. Awesome mod for our device! Thank you very much!
Click to expand...
Click to collapse
And with Dolby Atmos ??
Ferdav.lp said:
And with Dolby Atmos ??
Click to expand...
Click to collapse
Yes it works with Atmos - I ran that for a while myself - worked great.
If you're wondering - I ran the latest build from: https://androidfilehost.com/?w=files&flid=247761
Not my work - just linking to it since the main post for Atmos links to a 5 month older version by the same dev - very odd.
Ferdav.lp said:
And with Dolby Atmos ??
Click to expand...
Click to collapse
vtec303 said:
Thanks for the hard work, I don't get this instal and reinstall? but please confirm the following:
Flash the op6_v5_stereomod in twrp,
Install AML from magisk,
Reboot.
Thanks for your help.
Click to expand...
Click to collapse
No - if you're using Magisk - just download the ZIP, flash in Magisk. Then install AML from Magisk and you're golden!
Do any of these audio mods actually improve speaker quality? The speaker crackles at high volumes right out of the box. Would love to improve it, but wiping to unlock bootloader only seems worth it if there's a noticeable difference
xxBrun0xx said:
Do any of these audio mods actually improve speaker quality? The speaker crackles at high volumes right out of the box. Would love to improve it, but wiping to unlock bootloader only seems worth it if there's a noticeable difference
Click to expand...
Click to collapse
Some of the mods can have a considerable amount of effect on the audio quality but things like Atmos are not going to resolve any audio "popping" or distortion. ViPER may be able to help mitigate the issue.
The purpose of this mod, however, is actually just to enable the earpeace speaker as a secondary speaker so instead of just the one mono speaker at the button - you have a kind of stereo effect (i.e. 2 audio sources.)
I'm sure others can guide better on which specific ViPER settings may help with the issue you're facing but it may be worth tinkering if you're passionate about resolving the issue. That having been said - unlocking the bootloader and rooting does lose you OTA functionality so it's something to keep in mind.
How can permanent increase earpiece volume? If I increase it with ex kernel manager I turns back to normal after switching to standby
What is "AML" and there I get the aml module? ?
I have installed the v5 of stereo mod along with AML and Vioer4Amdroid. How do i control the volume and gain levels of earpiece? I am not able to find the control settings anywhere.
Vevee said:
I have installed the v5 of stereo mod along with AML and Vioer4Amdroid. How do i control the volume and gain levels of earpiece? I am not able to find the control settings anywhere.
Click to expand...
Click to collapse
You can change these values in a kernel manager. Also i think you'll need a custom kernel.
bartjeh1991 said:
You can change these values in a kernel manager. Also i think you'll need a custom kernel.
Click to expand...
Click to collapse
Ohh thanks. Can you please let me know which kernel works the best for it?
---------- Post added at 12:15 PM ---------- Previous post was at 12:09 PM ----------
Which kernel manager to use to control the sound settings of earpiece?
A kernel manager can do this for you - Kernel Aduitor is probably a good option.
Any kernel though mate - they all have that option as far as I'm aware.
chrisaw said:
A kernel manager can do this for you - Kernel Aduitor is probably a good option.
Any kernel though mate - they all have that option as far as I'm aware.
Click to expand...
Click to collapse
Can you post a screenshot i have installed kernel auditor but still see no option to control earpiece volume or gain