Guys i need your help since weall here have the same phone . this phone i bought it from hong kong i think i am not sure where it came from was written sydney on ebay but anw ..
When i power off my device (GT-9305) it the whole system lunguage from english into Bloody Chinese lunguage and everytime i need to go by heart and change the lunguage into english again .
can someone tell me what is the problem with it .. maybe a program i have install latetly and if it is i dont have a clue which one is cos i dont when this started this conflict.
if you had or have any simillar issue with me or you can help please write to this post thank you
Peace
Teo!
italianveins said:
Guys i need your help since weall here have the same phone . this phone i bought it from hong kong i think i am not sure where it came from was written sydney on ebay but anw ..
When i power off my device (GT-9305) it the whole system lunguage from english into Bloody Chinese lunguage and everytime i need to go by heart and change the lunguage into english again .
can someone tell me what is the problem with it .. maybe a program i have install latetly and if it is i dont have a clue which one is cos i dont when this started this conflict.
if you had or have any simillar issue with me or you can help please write to this post thank you
Peace
Teo!
Click to expand...
Click to collapse
If you have SuperSU installed update it to the latest 1.75 (from Play store) as it fixes a bug where the language changed upon boot/reboot.
hundred_miles_high said:
If you have SuperSU installed update it to the latest 1.75 (from Play store) as it fixes a bug where the language changed upon boot/reboot.
Click to expand...
Click to collapse
thank you i will update and confirm again here ... thank you for your time mates and knowledge
italianveins said:
thank you i will update and confirm again here ... thank you for your time mates and knowledge
Click to expand...
Click to collapse
No problem. Hope it fixes it for you.
I had the same issue before I updated SuperSU to 1.75 where my phone changed from English to Italian every boot / reboot.
You may need to:
1) update SuperSU,
2) open the app and update the binary, then reboot.
If it changes language again, reset it to English and reboot again - hopefully the problem will be sorted.
hundred_miles_high said:
No problem. Hope it fixes it for you.
I had the same issue before I updated SuperSU to 1.75 where my phone changed from English to Italian every boot / reboot.
You may need to:
1) update SuperSU,
2) open the app and update the binary, then reboot.
If it changes language again, reset it to English and reboot again - hopefully the problem will be sorted.
Click to expand...
Click to collapse
it is confirm and it is working after updating the superSU thank you for your time relpyling and helping me out !
italianveins said:
it is confirm and it is working after updating the superSU thank you for your time relpyling and helping me out !
Click to expand...
Click to collapse
:highfive:
Related
Please help, my new qtek 2020 is not working after i updated the rom to 1.72. It seems that i have forgotten to plug in the power supply when i performed the update. the update did not complete at all and the previous rom seem to be wiped out. Is there a fix to this???
PLEASE HELP
tonio said:
Please help, my new qtek 2020 is not working after i updated the rom to 1.72. It seems that i have forgotten to plug in the power supply when i performed the update. the update did not complete at all and the previous rom seem to be wiped out. Is there a fix to this???
PLEASE HELP
Click to expand...
Click to collapse
What's on screen of your device? "Serial... blablabla"?
If so, insert device into cradle (don't forget to plug power supply), screen will change to "USB... blablabla" and run upgrade again...
HTH.
thanks
Thank you Beecher. I already fixed and updated my qtek2020 to 1.72 using sd card bootloading method. Yours could have been the quickest way have I waited for your very helpful post.
Once again, thank you!
You're welcome...
I always say to everybody, who is flashing, my favourite sentence: DON'T PANIC!
tonio said:
.... after i updated the rom to 1.72......
Click to expand...
Click to collapse
Hi Tonio!
where did you get ROM 1.72? As i know it isnt free till now ....
pbelcl said:
tonio said:
.... after i updated the rom to 1.72......
Click to expand...
Click to collapse
Hi Tonio!
where did you get ROM 1.72? As i know it isnt free till now ....
Click to expand...
Click to collapse
I've posted the english en french version ROM 172.
Go to following link and read the procedure to download it.
http://forum.xda-developers.com/vie...tart=200&sid=76662759e42f87f8aaf235376202a5e1
Kind regards
ewdb said:
I've posted the english en french version ROM 172.
Go to following link and read the procedure to download it.
Click to expand...
Click to collapse
Worked pretty good
Thanks for the link.
is there a german version also aviable anywhere ?
regards pauli
No, I don't have the german rom.
I'm new at this so could somebody please explain how to modify the 1.72 wwe rom file. It gives the incorrect country code error message.
I'm using an orange m1000 from orange holland
hello every body
iam install rom 2.3.6 on my device to upgrade it
but when i install the rom the 3 key's - ( menu - home - back ) they stopped
how i can work it again
srry for my bad language
w8ing answers
thx :crying:
rir1a said:
hello every body
iam install rom 2.3.6 on my device to upgrade it
but when i install the rom the 3 key's - ( menu - home - back ) they stopped
how i can work it again
srry for my bad language
w8ing answers
thx :crying:
Click to expand...
Click to collapse
You have to flash the USA kernel.
TheKryptonite said:
You have to flash the USA kernel.
Click to expand...
Click to collapse
thank u
but can u give me link
and another question
how can add arabic language
and thx again
http://forum.xda-developers.com/showthread.php?t=1445840
Settings > Language & Input > Language. Or if you haven't, you can select your language when you first setup your device.
Anytime, man.
rir1a said:
thank u
but can u give me link
and another question
how can add arabic language
and thx again
Click to expand...
Click to collapse
TheKryptonite said:
http://forum.xda-developers.com/showthread.php?t=1445840
Settings > Language & Input > Language. Or if you haven't, you can select your language when you first setup your device.
Anytime, man.
Click to expand...
Click to collapse
but the usa version haven't arabic
what i do
and i'm sorry for annoying u
rir1a said:
but the usa version haven't arabic
what i do
and i'm sorry for annoying u
Click to expand...
Click to collapse
I don't understand your statement. You're supposed to use that kernel for the USA device, it has nothing to do with the language, lol.
Also, if try downloading the Arabian Language Pack from the Google Play store (if we're talking about the same thing).
Hello to all,
first of all I apologize for bad English
I ask your help in order to install the google gapps and root permissions on my tablet.
The tablet Onda V919 Dual Air CH OS version 5 with Android 5.1 lollipop
I tried everything to installere the gapps and do the root without results.
please help me!!!!:crying::crying::crying:
can any one help?
I have this tablet also.
I've tried a lot of gapps installer, but no success
niko00 said:
can any one help?
Click to expand...
Click to collapse
mismamente said:
I've tried a lot of gapps installer, but no success
Click to expand...
Click to collapse
This link (V919 AIR CH 双系统android固件(V7版本)-20160429) is a new version of Android 5.1 - V1.0.0_V5, build date of April 29. The main difference - the presence of preset gapps. Binary file "su" in the present system, but the question is about activating root-access remains open (in the previous version I su/SuperSU integrated into the image, this will have the same).
Thanks so much! I love you!!!
if it works I'll a statue!
Can not I register on that site!
If someone downloads the file, you can kindly share it?
I just can not register, do not you get the message with the code!
Any of you who have an active account could download it and share it?
niko00 said:
I just can not register, do not you get the message with the code!
Any of you who have an active account could download it and share it?
Click to expand...
Click to collapse
Choose: you can use my version: enabled root access (version 2.65 free of Chainfire) and ejected the Chinese program (but the language at first start - Russian). At the same time density of the screen I adjusted to a comfortable value. Or I can put the original, for example, in Google.Disk.
I managed to download !!!!! but with this rom it does not work sound! :crying:
ViAlexSt would try gladly your modified version!
niko00 said:
I managed to download !!!!! but with this rom it does not work sound! :crying:
ViAlexSt would try gladly your modified version!
Click to expand...
Click to collapse
I'm afraid not so simple. You had to change something in the BIOS settings? This is a possible cause of loss of sound. Firmware will not help here.
if you share it, do me a favor, I hate those Chinese programs
ViAlexSt said:
Choose: you can use my version: enabled root access (version 2.65 free of Chainfire) and ejected the Chinese program (but the language at first start - Russian). At the same time density of the screen I adjusted to a comfortable value. Or I can put the original, for example, in Google.Disk.
Click to expand...
Click to collapse
I would be also intrested of your version and preciate if you can share it. This is my first chinese tablet so is there some installation instructions also possible to share?
niko00 said:
if you share it, do me a favor, I hate those Chinese programs
Click to expand...
Click to collapse
kaapama said:
I would be also intrested of your version and preciate if you can share it. This is my first chinese tablet so is there some installation instructions also possible to share?
Click to expand...
Click to collapse
Well, here
niko00 said:
but with this rom it does not work sound! :crying:
Click to expand...
Click to collapse
Yes, indeed, if update the firmware to version 20160429, some of the revisions of the tablet the sound disappears. I can advise you to try version 20160307, rooted and gappsed (added in the thread from the link above).
Thank you so much, after two months I can finally use this tablet !!
I flashed Latest Xiaomi EU rom based on pie through twrp , but it had many bugs so flashed global beta 8.10.25 rom through twrp but the option to add face unlock vanished from the settings! It didn't even asked me to register my face from the initial setup also ! I also tried flashing the firmware but still no face unlock available ! Please XDA awesome developers HELP ME!
Thankyou In advance .:crying:
Omkar vilankar said:
I flashed Latest Xiaomi EU rom based on pie through twrp , but it had many bugs so flashed global beta 8.10.25 rom through twrp but the option to add face unlock vanished from the settings! It didn't even asked me to register my face from the initial setup also ! I also tried flashing the firmware but still no face unlock available ! Please XDA awesome developers HELP ME!
Thankyou In advance .:crying:
Click to expand...
Click to collapse
Try changing the region. To Hong Kong
if you can't change region manually, so install buildprop editor, then touch the pen symbol to edit, go last row and type or copy this:
ro.miui.region=** (** is your region)
Karobia said:
Try changing the region. To Hong Kong
Click to expand...
Click to collapse
Whenever i click on region it doesnt do anything ,its set to china by default! Should i flash the stable miui 9 ? Thanks for your reply
diorlee90 said:
if you can't change region manually, so install buildprop editor, then touch the pen symbol to edit, go last row and type or copy this:
ro.miui.region=** (** is your region)
Click to expand...
Click to collapse
Did that too, still face unlock not present ! Please any other methods to get it back ! Help me! Thanks for the reply :crying:
Omkar vilankar said:
Did that too, still face unlock not present ! Please any other methods to get it back ! Help me! Thanks for the reply :crying:
Click to expand...
Click to collapse
i have issue like you so i'm add a row to buildprop editor : ro.miui.region=VN then reboot and faceunlock feature comback again
p/s: did your root your phone?
diorlee90 said:
i have issue like you so i'm add a row to buildprop editor : ro.miui.region=VN then reboot and faceunlock feature comback again
p/s: did your root your phone?
Click to expand...
Click to collapse
Yes i rooted from phone through magisk, and added line ro.miui.region=Hong Kong but no use ,im trying now ro.miui.region=VN and will let you know if it works! Thanks for your valuable time n help
Omkar vilankar said:
ro.miui.region=Hong Kong
Click to expand...
Click to collapse
Country code for Hong Kong is HK
Hey guys,I flahed my xperia 1 to Android 11 SEA edition because of mine was CN Android 10,I deleted simlock.ta before I flash, and my newflasher version is v40,after flashing,my storage become 64G,I wonder if there is a way to fix it.Thx for your help
Guys,I solved it by reset after flashing.maybe this can help you with same issue
你说你是cn的版本，我认为你是中国老铁咯
我也遇到了跟你一样的情况
我重新进绿灯模式，运行newflasher
这一次，在第三个选项处也就是trim area选y，运行后重启手机就恢复128G了
我正在尝试重新刷机是不是还会变成64G，希望可以帮到你
MOD EDIT: Please post only in English according to the FORUM RULESor at least add an English translation below your foreign language(Google translator for example),translation added below:
You say you are the version of cn, I think you are the old Chinese iron
I also encountered the same situation as you
I re-enter the green light mode and run newflasher
This time, select y in the third option, which is trim area. After running, restart the phone to restore 128G.
I'm trying to re-flash the phone to see if it will become 64G, I hope it can help you
for other guys
just use newflasher again,and choise y on third (trim area）
再刷机还是会变成64G
it will back to 64G if flash again
Delete partition/partition-image-LUN0_62480384_X-FLASH-ALL-A2CD.sin before flashing.
zzxd828 said:
你说你是cn的版本，我认为你是中国老铁咯
我也遇到了跟你一样的情况
我重新进绿灯模式，运行newflasher
这一次，在第三个选项处也就是trim area选y，运行后重启手机就恢复128G了
我正在尝试重新刷机是不是还会变成64G，希望可以帮到你
MOD EDIT: Please post only in English according to the FORUM RULESor at least add an English translation below your foreign language(Google translator for example),translation added below:
You say you are the version of cn, I think you are the old Chinese iron
I also encountered the same situation as you
I re-enter the green light mode and run newflasher
This time, select y in the third option, which is trim area. After running, restart the phone to restore 128G.
I'm trying to re-flash the phone to see if it will become 64G, I hope it can help you
Click to expand...
Click to collapse
我发现刷完11之后重置一次就好了，不过还是谢谢你了
MOD EDIT: Please post only in English according to the FORUM RULESor at least add an English translation below your foreign language(Google translator for example),translation added below:
I found that resetting once after brushing 11 is fine, but thank you
Singhoi Mo said:
Delete partition/partition-image-LUN0_62480384_X-FLASH-ALL-A2CD.sin before flashing.
Click to expand...
Click to collapse
It doesn't work for me,but I solved it by reset,still thx for answer
各人各命啊，我重置就没好
MOD EDIT: Please post only in English according to the FORUM RULESor at least add an English translation below your foreign language(Google translator for example),translation added below:
Everyone has his own life, I reset it and it's not good
zzxd828 said:
MOD EDIT: Please post only in English according to the FORUM RULESor at least add an English translation below your foreign language(Google translator for example),translation added below:
Everyone has his own life, I reset it and it's not good
Click to expand...
Click to collapse
或许试一下刷到SEA的Android10再OTA也是个办法
MOD EDIT: Please post only in English according to the FORUM RULESor at least add an English translation below your foreign language(Google translator for example),translation added below:
Maybe try to brush Android10 to SEA and then OTA is another way
Solution is not do delete anything other than persist.sin! Real solution is to provide newflasher log so newflasher get fixed! https://forum.xda-developers.com/t/tool-newflasher-xperia-command-line-flasher.3619426/post-84309865
There is also untested solution for bypass rollback protection https://forum.xda-developers.com/t/tool-newflasher-xperia-command-line-flasher.3619426/post-84309899 , need somebody test it.
zzxd828 said:
for other guys
just use newflasher again,and choise y on third (trim area）
Click to expand...
Click to collapse
@zzxd828 the last option is that when it ask again yes or no? Because i flashed A11 on my Xperia 1 and same issue with that 64GB instead 128GB, Any fix BTW?
Edit: fixed it
do a brand new flash so wipe everything and when it boots up and settled, do a factory reset, it reboots, it takes a while so no worries and tadaa 128gb is there in internal memory
Pandemic said:
@zzxd828 the last option is that when it ask again yes or no? Because i flashed A11 on my Xperia 1 and same issue with that 64GB instead 128GB, Any fix BTW?
Edit: fixed it
do a brand new flash so wipe everything and when it boots up and settled, do a factory reset, it reboots, it takes a while so no worries and tadaa 128gb is there in internal memory
Click to expand...
Click to collapse
I think that's a newflasher bug,or some features for Mark 2 cause our problem.
I tryed newflaher v33,all is fine.
zzxd828 said:
I think that's a newflasher bug,or some features for Mark 2 cause our problem.
I tryed newflaher v33,all is fine.
Click to expand...
Click to collapse
I think without newflasher log I not going to fix anything.
munjeni said:
I think without newflasher log I not going to fix anything.
Click to expand...
Click to collapse
Sorry,i didn't retain anything.A HUGE thank for your follow.
There was ten reports about problem after flashing with newflasher but nobody mind to provide log, I won't fix without newflasher log & to be honest not care
B
zzxd828 said:
I think that's a newflasher bug,or some features for Mark 2 cause our problem.
I tryed newflaher v33,all is fine.
Click to expand...
Click to collapse
Oke nice and you flashed with v33 and no internal bug like 64 GB instead 128 GB ? Can you five me v33 please @zzxd828
Pandemic said:
B
Oke nice and you flashed with v33 and no internal bug like 64 GB instead 128 GB ? Can you five me v33 please @zzxd828
Click to expand...
Click to collapse
Here.
zzxd828 said:
Here.
Click to expand...
Click to collapse
Thanks mate and when you flash with v33 internal memory is oke like with 128gb @zzxd828 ?
munjeni said:
There was ten reports about problem after flashing with newflasher but nobody mind to provide log, I won't fix without newflasher log & to be honest not care
Click to expand...
Click to collapse
Really sorry.I didnt know to save these.I reproduce the problem and save the log.I hope thats the log you asked.