Related
Knives & Forks
WHAT IS IT?
Knives & Forks is a set of Android tools for everyone. Every operating system, every device.
This cross-platform Android toolkit, written in Python, that is designed to work in Linux, Mac OS X or Windows. I wanted to create something that was unique, and offered a consistent and feature-filled set of tools for Android devs no matter what operating system they use, and for as many Android devices as possible.
WHAT DOES IT DO?
I just started work on this project, so it doesn't do very much yet. Right now we are just focusing on getting drivers and adb installed for as many devices as we can on all three platforms. Once we have adb working for everyone, the real fun can begin as we start to add more device tools that will make use of adb, such as rooting. Eventually ROM customization tools will be added, but we are focusing on device tools and cross-platform compatibility at this time.
View the changelog to see a list of included drivers. The only device that I can confirm is compatible with this script in Linux, Mac OS X, and Windows is the Samsung Galaxy S II, Sprint Epic 4G Touch. This just so happens to be my personal phone, but as I gather feedback I will create an official list of supported devices.
WHERE DO I GET IT?
This project is now being hosted by the Android Creative Syndicate. An up to date link to the most current version of the script, installation instructions for Linux, Max OS , and Windows, and other information can be found HERE. Registration is not required at the ACS forum to download or view installation instructions. You are free to reply in the thread you are reading right now if you don't want to register for another forum.
I HAVE IT INSTALLED, NOW WHAT?
You should be able to open up your terminal application (or command prompt) and run some adb commands. In the future we will be automating adb commands for you, but for now you can try the following as a simple test:
Code:
adb reboot
If everything worked, your Android device should reboot. For further reading on what you can do with adb you can read THIS PAGE.
HOW TO SUPPORT THIS PROJECT
FEEDBACK
Download my script, test it, let me know what happens. Let me know what other features/tools I should add.
THANKS
Hit the thanks button if you like what I'm doing here.
DONATIONS - I don't currently have a link to send me money, but I could quickly set something up if somebody decides they want to help me feed my kid. I am recently unemployed, but I am not relying on my scripting skills to feed my family. Save your cash for a more worthy project, or tuck it away and wait until the project turns into something amazing.
INFORMATION
TELL ME ABOUT YOUR ANDROID DEVICES!
If my script isn't getting adb setup for your device, let me know where to download the correct Windows driver and/or what udev rules I need to add in Linux.
The next phase of this project will be automating the rooting process. If you know the process for rooting your device, please share the details.
HOW TO REPLY TO THIS THREAD
Please do not reply by saying something like "This looks awesome, I'm going to download it now!".
Just download it, test it out, and then tell me about it.
If my script works for you, please don't post something like "It worked for me, this is the best thing since sliced bread!".
At the moment all my script will do is install adb and drivers for your device. In order to test please uninstall any drivers you may have already installed, run my script, then reply with the following information:
Operating System (including version and 32-bit or 64-bit architecture)
Android Device
If you open up a terminal/command prompt window and enter the following command, does your device reboot? If not, do you receive any error messages (while running that command or at any phase of running the Kinves & Forks script)?
Code:
adb reboot
CHANGELOG
Code:
------------------------------------------------------------------------------------
Knives & Forks: Changelog
------------------------------------------------------------------------------------
The most current version is available for download from:
http://knivesandforks.info/releases/knives-and-forks-current.php
**** 12.02.04 ****
http://knivesandforks.info/releases/knives-and-forks-12.02.04.php
- LINUX CHANGES:
-- "python2" is now called by "Knives-and-Forks-Linux.sh" instead of "python" on Arch.
- This prevents starting the script with Python 3, which results in errors.
-- Changes to "scripts/linux/install-adb-linux.sh":
- "su" will be used if "sudo" is not installed, or user doesn't have permissions to use it.
- Added 32-bit libs for more 64-bit distros:
- Arch (new in this release)
- CentOS (new in this release)
- Debian
- Fedora (new in this release)
- Ubuntu, Kubuntu, Xubuntu
- Added Debian version of '/etc/udev/rules.d/99-android.rules'
- Added '/lib/udev/rules.d/92-permissions.rules' for Debian.
This should fix permissions, allowing adb to run without sudo or su.
- WINDOWS CHANGES:
-- Fixed a couple of missing quotes which were breaking things under Windows XP
- "%userprofile%" was coming back as "c:\documents" instead of "c:\documents and settings\username" in a couple of places
-- "c:\python27" is now the only directory where we look for python.exe
- It is faster to download and install Python to "c:\Python27" than it is to search for it elsewhere.
- This will also prevent issues where Python 3 was installed instead of Python 2, since the script currently gives errors under Python 3.
-- Updated amd64 and x86 versions of setx.exe for updating system PATH on XP/VISTA/7
-- PATH is updated with adb.exe location after Python is installed.
-- The computer will now reboot after updating the PATH, to make sure it will be updated before running the main program.
**** 12.01.27 ****
http://knivesandforks.info/releases/knives-and-forks-12.01.27.php
- GENERAL CHANGES:
-- After adb is installed, adb will reset the android device by running "adb reboot" instead of displaying a list of attached devices with "adb devices".
adb was occasionally reporting no devices were attached, when they infact were. When this happened "adb reboot" still worked, so it is a better test to see if adb is setup properly.
-- Friendlier messages during adb install and testing
-- Added a startup check to make sure the script is running from the correct directory
-- Removed empty Project directory, as it is not being used yet.
- LINUX CHANGES:
-- Added support for "lxterminal" and "urxvt" in "Knifes-and-Forks-Linux.sh"
-- Changed idVendors for Linux udev rules to lowercase instead of uppercase.
- WINDOWS CHANGES:
-- Startup script searches for python in "C:\Program Files (x86)" then "C:\Program Files" and "c:\" last.
-- Drivers should now install even if the language is not English
-- Added drivers for Casio C771 G'zOne Commando
-- Added LG drivers
-- Replaced setx.exe
**** 12.01.25 ****
http://knivesandforks.info/releases/knives-and-forks-12.01.25.php
- Replaced "Knives-and-Forks-Mac.sh" with "Knives-and-Forks-Mac.app".
Starting the script on a Mac should now be as simple as double-clicking the new .app file.
**** 12.01.24 ****
http://knivesandforks.info/releases/knives-and-forks-12.01.24.php
- Fixed a typo which caused the script to crash when viewing the credits screen.
- Smarter python fix for Windows users.
-- "C:\" and all sub-directories are searched for python.exe.
-- If python is not not found, it will be downloaded from python.org and installed to c:\python27.
-- If python is found (in "C:\python27", "c:\python", "c:\xyz123", "c:\program files\python27" or in any directory with any name anywhere on drive c:) the main menu script will launch.
- Added changelog.txt to the release .zip file.
**** 12.01.23 ****
http://knivesandforks.info/releases/knives-and-forks-12.01.23.php
- Minor update to fix Python installation for Windows users, which was causing the script not to launch.
**** 12.01.22 ****
(FIRST PUBLIC RELEASE)
http://knivesandforks.info/releases/knives-and-forks-12.01.22.php
- Added option to install adb & fastboot for Linux, Windows, Mac
- Added Linux drivers for:
-- ACER
-- ASUS
-- DELL
-- FOXCONN
-- GARMIN-ASUS
-- Google
-- Hisense
-- HTC
-- HUAWEI
-- K-TOUCH
-- KT Tech
-- KYOCERA
-- LENEVO
-- LG
-- MOTOROLA
-- NEC
-- NOOK
-- NVIDIA
-- OTGV
-- PANTECH
-- PEGATRON
-- PHILIPS
-- PMC-SIERRA
-- QUALCOMM
-- SK TELESYS
-- SAMSUNG
-- SHARP
-- SONY ERICSSON
-- TOSHIBA
-- ZTE
- Added Mac drivers for:
-- Nothing. According to Google, "It just works." Let me know if they are right.
- Added a custom Windows installer with drivers for:
-- GOOGLE
-- HTC
-- HUAWEI
-- SAMSUNG
WHERE DID THE OLD POSTS GO?
In an attempt to reduce unnecessary clutter in my original thread, I created supporting threads in each Android device forum. The whole reason behind posting so many times was to keep certain information in the Chef Central post, and certain information out of it in an effort to reduce clutter. Who wants to read through 50 pages of how this, that, and the other thing is or isn't working on devices that you don't own? That system appeared to work very well, but apparently I broke the rules by posting in every Android device forum.
Learn from my mistakes, don't post similarly worded posts all over the place!
ATTENTION PYTHON PROGRAMMERS:
Any idea on what I can do to make the Python files work in Python 2 and Python 3? I have only tested in Python 2.7.2, but I have received reports that Python 3 gives errors. I'm not really doing anything all that fancy, so I'm not sure if something is just a matter or new syntax or something else needs to be imported or what. Any help would be appreciated.
The next release will call "python2" for Arch Linux users since "python" will use python 3.
ATTENTION LINUX USERS:
I am currently testing my Knives & Forks script in some virtual machines using VirtualBox, as well as my local Xubuntu installation.
For distro specific things (installing 32-bit libs, udev changes, etc) in the next release I will be detecting the distro using the following code:
Code:
echo " -- DETECTING LINUX DISTRO --"
if [ "`cat /etc/issue | grep Arch | wc -l`" == "1" ]; then
DISTRO_NAME="Arch"
elif [ "`cat /etc/issue | grep Cent | wc -l`" == "1" ]; then
DISTRO_NAME="CentOS"
elif [ "`cat /etc/issue | grep Debian | wc -l`" == "1" ]; then
DISTRO_NAME="Debian"
elif [ "`cat /etc/issue | grep Fedora | wc -l`" == "1" ]; then
DISTRO_NAME="Fedora"
elif [ "`cat /etc/issue | grep Ubuntu | wc -l`" == "1" ]; then
# DETECTS UBUNTU, KUBUNTU, XUBUNTU, ETC
DISTRO_NAME="Ubuntu"
else
DISTRO_NAME="UNKNOWN"
fi
echo " - $DISTRO_NAME"
Please let me know what other distros your using and if you are able to find the name using the "/etc/issue" method I am using in the above if statements.
I wrote a bash function to check if sudo is installed, and then to see if the current user has permissions to use sudo. If sudo is not installed, or if the current user does not have permission to use it, su will be used instead. This will be included in my next update, but I wanted to post it here first:
Code:
echo " -- CHECKING TO SEE IF 'SUDO' IS INSTALLED --"
CURRENT_USER=$USER
USE_SUDO="NO"
if [ -f "/usr/bin/sudo" ]; then
echo " - 'sudo' is installed."
echo ""
echo " -- CHECKING FOR PERMISSION TO USE 'SUDO' --"
echo ""
echo " If prompted, enter the password for the user '$CURRENT_USER'."
echo ""
if [ "$(sudo whoami)" != "root" ]; then
echo ""
echo " - Sorry, '$CURRENT_USER' does not have permission to use 'sudo'."
echo " - 'su' will be uses instead of 'sudo'."
echo ""
else
echo " - '$CURRENT_USER' has permission to use 'sudo'."
USE_SUDO="YES"
echo ""
fi
else
echo " - 'sudo' is not installed."
echo " - 'su' will be used instead of 'sudo'."
echo ""
fi
DO_SU()
{
echo ""
if [ $USE_SUDO == "YES" ]; then
# echo " -- USING 'SUDO' TO RUN '$1' --"
echo ""
echo " If prompted, enter the password for the user '$CURRENT_USER'."
echo ""
sudo $1
else
# echo " -- USING 'SU' TO RUN '$1' --"
echo ""
echo " If prompted, enter the password for the user 'root'."
echo ""
su -c "$1"
fi
echo ""
}
# EXAMPLE USAGE OF THE DO_SU() FUNCTION:
# NOTE THAT THE COMMAND TO RUN WITH SU OR SUDO HAS TO BE IN QUOTES
DO_SU "whoami"
I also found out why debian users were being forced to use sudo or su in order to use adb. The next release will include this fix, but for those who might be interested in making this change manually:
Open "/lib/udev/rules.d/91-permissions.rules" as root (su or sudo) in your favorite text editor and find this line
Code:
usbfs-like devices SUBSYSTEM==”usb”, ENV{DEVTYPE}==”usb_device”, \ MODE=”0664″
Change MODE to "0666"
Code:
usbfs-like devices SUBSYSTEM==”usb”, ENV{DEVTYPE}==”usb_device”, \ [B]MODE=”0666“[/B]
Instead of replacing or modifying your "/lib/udev/rules.d/91-permissions.rules" file, the next version of my script will actually create a "/lib/udev/rules.d/92-permissions.rules" for Debian users that contains only the following:
Code:
# usbfs-like devices
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", \
MODE="0666"
This file will load right after the 91-permissions.rules and replace just the usbfs-like devices settings. I'm just doing this with my script so I don't accidently break anything on your system. If you are making the changes manually, editing the 91-permissions.rules file should be all you need to do.
Save your changes and then restart udev as root (using sudo or su)
Code:
/etc/init.d/udev restart
-- or --
Code:
service udev restart
This assumes of course that you already have a working udev rule for your android device, and that adb is working only with su or sudo currently. Once this change is made you should be able to use adb without being forced to use su or sudo.
First post updated with latest release, version 12.02.04.
Lots of changes for XP and various Linux distros. See changelog for more information, but things should work better in Arch, CentOS, Debian, Fedora, and Ubuntu (including Kubuntu, Xubuntu, etc).
Hi, I just downloaded the latest file (12.02.04) but it's only 4 KB.
Could you check please?
Thank you!
Trying to unzip the file in Ubuntu 11.10 and this what I get:
Archive: knives-and-forks-12.02.04.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of knives-and-forks-12.02.04.zip or
knives-and-forks-12.02.04.zip.zip, and cannot find knives-and-forks-12.02.04.zip.ZIP, period.
Any help?
I had a typo in the .zip filename, so if you tried to download the file yesterday you basically just downloaded an error message that the .php counter script gave when it couldn't find the file. I will have to take a look at that later because it is supposed to display the message not make you download it.
The problem is now fixed, sorry about that.
Thanks for update.
Downloaded and installed.
Now I can adb from linux.
Have one more question. I hope you can help me with that as well.
I don't see my device (E4GT) as external hard drive or USB drive when debuging is on to copy files to it.
When debuging is off it shows 2 Android devices but when I click on them I'm getting this message:
Error initializing camera: -60: Could not lock the device
Any ideas?
My guess is maybe they didn't get unmounted properly that last time you had it plugged in, but I have no idea why you would get an error message about the camera. I have not seen that one.
Try installing Dropbox and backing up anything important, then formatting the sdcard and try mounting again.
Maybe somebody else has had that error and has a better idea,
I'll try to format sd card tonight when I get home.
But what would be the problem with internal storage?
And what should or could I try to proper mount it?
agat63 said:
I'll try to format sd card tonight when I get home.
But what would be the problem with internal storage?
And what should or could I try to proper mount it?
Click to expand...
Click to collapse
First thing to check is that it isn't ROM related. Boot into recovery and try to mount as a usb drive and see if it works or not. If it does, I would say wipe and flash another ROM. If it doesn't work from recovery, then it could be a result of not unmounting before unplugging from your computer.
Sometimes if you have your phone mounted as a USB drive, or even just a regular flash drive, and it you unplug it before it is done unmounting (or if you don't use the safely remove hardward feature of Windows) the filesystem can get trashed. It hasn't happened alot with me, and I have seen the problem happen mostly when a flash drive is unplugged before the OS can finish writing to it.
After you get all of your important stuff backed up somewhere like dropbox, reboot into your recovery and repartition the sd card and/or your internal storage, whatever is giving you the problem. When you reboot into android you should be able to use it as normal, and dropbox should automatically copy everything back that you backed up.
This problem isn't really related to my script, so I if you can't get the issue resolved make a new post in Android QA or somewhere else. PM me if you post elsewhere and I can see if I can help you out there.
I didn't mean to say that the problem is related to your script.
Your script works just fine and I'm able to adb.
I'm kinda new to linux and still learning it.
I needed help and advise for how to connect phone to pc in linux.
It works in windows for me.
When I get on my PC I'm gnats give this awhirl. Ad for your mounting disk drives if ur on any ics rom it wont and I don't know how to enlighten me someone but if its gingerb then make sure u mount with the phones option when u plug in on ur handset ther should be some kind of way to switch between teather, disk and charge only? Wat fone u got?
Does this knife and forks compile? What does it do? Sorry to sound like a knob.
Sent from my GT-I9100 using XDA Premium App
This worked for my att gs2.
Sent from my GT-I9100 using Tapatalk
By using the Android Font you are violating their copyright rules. But you are free to modify the Android Robot, as long as you refer to them and say that you have permission.
Bad-Wolf said:
By using the Android Font you are violating their copyright rules. But you are free to modify the Android Robot, as long as you refer to them and say that you have permission.
Click to expand...
Click to collapse
The post where I found the font said it was an Android logo inspired font, and not the actual android logo font.
I have changed the font I'm using, and have updated my logo graphic to fight off any further concerns.
Colliebudz said:
Does this knife and forks compile? What does it do? Sorry to sound like a knob.
Click to expand...
Click to collapse
At the moment it simply automates getting adb setup on Linux, Mac, and Linux.
I have plans to add support for device rooting next, followed by some other adb commands, then rom customization tools as the last stage of development.
Pushing files to the phone, running shell commands, etc, requires that adb is setup properly, so that is where the focus is at right now. Getting the adb & driver installation scripts setup to run on all three platforms is also helping take care of some general troubleshooting, which is good to get out of the way before the main script gets tons of extra features.
All of this info should be in the first post, I'll try to clarify things when I make the next update.
Waddle said:
This worked for my att gs2.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks for the feedback. What OS?
hi all
i have an galaxy SIII
i am using script manager.
i want to write a script and i have 2 questions
- how to write a script who open an url with the web browser
- is there an function to send a ping to see if an local adress avalaible (192.168.1.X) if not avalaible is there an return error ?
(sorry to seem stupid but i am coming from windows and i am a bit lost for the moment )
thank u for giving me a your time
no suggestion ?
or advise
Google something like "android open browser from shell". You can do it using intents.
Also:
Code:
ping --help
this work in an script u put
am start -a android.intent.action.VIEW -n com.android.browser/.BrowserActivity http://www.google.fr
for chrome i find this
am start -a android.intent.action.VIEW -n com.android.chrome/.Main -d http://xxxxxxxx
but i not find for opera if someone have it
finally
opera =
am start -a android.intent.action.VIEW -n com.opera.browser/com.opera.Opera -d http://www.google.xxxx
hope this help someone
lol now i really need help coz i found nothing
i want to know which ip is reachable from 192.168.1.(1 to 9)
in a script to automate that and give me wish is reachable for use it in a command to browser.
(i know ping from terminal emulator but it's not what i am looking for)
forgive my english i hope you understand what i want ant hope too u help me with this
kondronaute said:
i want to know which ip is reachable from 192.168.1.(1 to 9)
in a script to automate that and give me wish is reachable for use it in a command to browser...
Click to expand...
Click to collapse
That's easy, check:
Code:
for var in {1..9}
do
echo "Looking for 192.168.1.$var..." #optional... jejeje
if ping 192.168.1.$var -c 1 > /dev/null
then
#Reachable, put here your command
else
#Unreachable, you can show an error here
fi
done
RoberGalarga said:
That's easy, check:
Code:
for var in {1..9}
do
echo "Looking for 192.168.1.$var..." #optional... jejeje
if ping 192.168.1.$var -c 1 > /dev/null
then
#Reachable, put here your command
else
#Unreachable, you can show an error here
fi
done
Click to expand...
Click to collapse
but ping command is not reconized by script manager i can only do it with terminal emulator ....
Really? I didn't know that (weird, BTW). Check if you need to use another command with Script Manager, or if you need to add something.
I dunno another way to achieve your goal... only using ping
lol i have a headeach with this and find nothing
RoberGalarga said:
Really? I didn't know that (weird, BTW). Check if you need to use another command with Script Manager, or if you need to add something.
I dunno another way to achieve your goal... only using ping
Click to expand...
Click to collapse
finally i have possibility to run ping you must just in option of script manager chek "override $PATH"
after 2 or 3 aspirin this work for me
#!/system/bin/sh
for i in $(seq 2 10);
do
host="192.168.1.$i"
ping -c 1 -W 1 $host > /dev/null &&
am start -a android.intent.action.VIEW -n com.android.browser/.BrowserActivity http://$host ;
done
i dont know why i have error with else and if with android shell ????
i thank u again for your help and hope the masters here help us a bit to understand, it's difficult coz there are differences with simple linux and this for french using windows :laugh:
Try if this help.
i have this kind of probleme http://forum.xda-developers.com/showthread.php?t=1045006
but i am usin the script manager editor on my phone !!!!!
i have not Windows EOL formatting
please if u are guru of busybox your help is needed to use if else and fi in a script.
must i download another version of busybox or add a command ????
i am fully rooted the path in script manager is good
edit = after trying and googleing
after if you must put [[your code without space before and after]] and after then (yourcode) :laugh:
hope i find the rest...
kondronaute said:
i have not Windows EOL formatting
Click to expand...
Click to collapse
Are you sure? Because if you have created the script in windows, you have that EOL formatting (whatever that means :silly. Try this:
Open Terminal Emulator, and type
Code:
echo "hello there" > /sdcard/newScript.sh
This will create a new and clean script in your SD Card.
Then, go to Script Manager, and edit that script. You can start deleting the text ("hello there") and adding this:
Code:
testvar=1
if [ "$testvar" = "1" ] ; then
echo "All is right"
fi
Ok, run the script. If you can see the text "All is right", that's it, problem solved
RoberGalarga said:
Are you sure? Because if you have created the script in windows, you have that EOL formatting (whatever that means :silly. Try this:
Open Terminal Emulator, and type
Code:
echo "hello there" > /sdcard/newScript.sh
This will create a new and clean script in your SD Card.
Then, go to Script Manager, and edit that script. You can start deleting the text ("hello there") and adding this:
Code:
testvar=1
if [ "$testvar" = "1" ] ; then
echo "All is right"
fi
Ok, run the script. If you can see the text "All is right", that's it, problem solved
Click to expand...
Click to collapse
you save my last neuron
thanks
edit =
my fault is i create a text file under windows (easier and can copy and past easily) after i put the file on my phone and copy past the code in a new script.
i not think that when i just copy past i past the EOL formatting ( i dont know what is that but its a bad thing )
that's mean i must abandon windows and migrate totally to linux
anyway that make me crazy and i am happy to sort it.
you are very helpfull many thanks again
new edit = i understand now why they say notepad++ is necessary
Hi XDA developers community!
I think this question was not asked before, because it's too specific.
So here is the problem:
From the Terminal Emulator I am trying to start Poot like so:
Code:
am start -a android.intent.action.MAIN -n org.giantpune.Poot.Poot/android.intent.action.MAIN
and get this error message:
Code:
Error type 3
Error: Activity class {org.giantpune.Poot.Poot/android.intent.action.MAIN} does not exist.
I inspected the AndroidManifest.xml and looked for useful intent commands, but had no luck and even converted the .apk with dex2jar.
As I don't have any experience with Java, the sole purpose of decompiling it in the first place was an interesting intent entry on line 136 in the QtActivity.java file.
It is either located in org/kde/necessitas/origo/ as QtActivity.class, when converted with dex2jar.
Or in Poot-debug(W100)/smali/org/kde/necessitas/origo/ as QtActivity.smali, when decompiled with apktool.
What I am trying to achieve is not only starting the app from the console, but to make it run the action of the "Press here to poot" button.
The device is rooted, should that matter at all.
How can I achieve this and do I even need intent commands or not?
I hope you can help.
Bump
Can anybody help?
As nobody has answered, here is the information I was able to gather meanwhile:
According to a post (can't post link due to restriction) on Android Enthusiasts I need to enter a classname like this:
Code:
am start -a android.intent.action.MAIN -n <package_name>/<full_class_name>
But as there is no class name specified in the AndroidManifest.xml (Link located in first post above), I am not sure how this problem can be solved.
I entered different variations of the command:
Code:
am start -a android.intent.action.MAIN org.giantpune.Poot
Code:
am start org.giantpune.Poot/android.intent.action.MAIN
Code:
am start -a android.intent.action.LAUNCHER org.giantpune.Poot
Code:
am start org.giantpune.Poot/android.intent.action.LAUCHER
None of them worked.
Can someone answer this?
Hi there!
Following the hadk pdf from jolla porting guide.
I've got the sailfishos working on terminal android running. Booting on top attempting since monday tonight.
I'll explain more and I'll give more shots on working.
My issue now is to build the boot, recovery image to flash and boot it. The jolla sailfishos as a GUI operating system on Galaxy S3 I9300 model.
FIY : filename = sfa-i9300-ea-1.0.8.19-my1.tar.bz2
Instructions for chroot co,pilation on ubuntu amd64 x86_64 bit:
Code:
sudo mkdir -p /srv/mer/
mkdir -p $HOME/mer/
nano .bashrc
export $MER_ROOT=/srv/mer/
export $MER_ROOT=$HOME/mer/
ctrl +x to save and y
but type sudo apt-get install -y curl
for do the downloading file.
next do the following commands on terminal:
export $MER_ROOT=/srv/mer/
cd $HOME; curl -k -O https://img.merproject.org/images/mer-sdk/mer-i486-latest-sdk-rolling-chroot-armv7hl-sb2.tar.bz2 ;
sudo mkdir -p $MER_ROOT/sdks/sdk ;
cd $MER_ROOT/sdks/sdk ;
sudo tar --numeric-owner -p -xjf $HOME/mer-i486-latest-sdk-rolling-chroot-armv7hl-sb2.tar.bz2 ;
echo "export MER_ROOT=$MER_ROOT" >> ~/.bashrc
echo 'alias sdk=$MER_ROOT/sdks/sdk/mer-sdk-chroot' >> ~/.bashrc ; exec bash ;
echo 'PS1="MerSDK $PS1"' >> ~/.mersdk.profile ;
sdk
Now, do the following instructions:
$HOST>
nano $HOME/.hadk.env
export MER_ROOT="[/home/$user]"
export ANDROID_ROOT="$MER_ROOT/android/droid"
export VENDOR="[samsung]"
export DEVICE="[i9300]"
ctrl +x and y for save it.
nano $HOME/.mersdkubu.profile
function hadk() { source $HOME/.hadk.env${1:+.$1}; echo "Env setup for $DEVICE"; }
export PS1="HABUILD_SDK [\${DEVICE}] $PS1"
hadk
save it again
nano $HOME/.mersdk.profile
function hadk() { source $HOME/.hadk.env${1:+.$1}; echo "Env setup for $DEVICE"; }
hadk
now save this file.
Now in ctrl + alt + x, it will show a terminal:
type this:
sdk
type your password
hadk
TARBALL=ubuntu-quantal-android-rootfs.tar.bz2
curl -O http://img.merproject.org/images/mer-hybris/ubu/$TARBALL
UBUNTU_CHROOT=/parentroot/$MER_ROOT/sdks/ubuntu
sudo mkdir -p $UBUNTU_CHROOT
sudo tar --numeric-owner -xvjf $TARBALL -C $UBUNTU_CHROOT
hadk
ubu-chroot -r /parentroot/$MER_ROOT/sdks/ubuntu
exit
git config --global user.name "Your Name"
git config --global user.email "Your email"
back again for
hadk
cd $HOME
mkdir -p $HOME/mer/android/droid
repo init -u git://github.com/mer-hybris/android.git -b hybris-10.1
repo sync
after this, you will have HABUILD_SDK
DEVICE=i9300
export $DEVICE
source build/envsetup.sh
breakfast $DEVICE
now type
make hybris-hal
But now as a ota file for flashing on i9300, in this last 2 days in my laptop core2Duo Extreme I'm facing overheating.
So, everyone can test it.
Code:
A little change on mount fixups.
Go to the directory hybris/hybris-boot
nano mount-fixups on i9305| encore)
put the "i9305" | "encore" | "i9300")
Script for booting sailfishingos on an android terminal. This script is to mount the binds folders and for fixing for preventing the /dev/null issue when we all boot the chroot sailfishos.
name of the script : sailfishos.sh - made it on the /extsdCard/ folder.
1) nano /extSdCard/sailfishos.sh and copy the following code
2) ctrl +x to save it
3) bash sailfishos.sh
Code:
su
mount -o bind /dev /data/.stowaways/sailfishos/dev
mount -o bind /proc /data/.stowaways/sailfishos/proc
mount -o bind /sys/ /data/.stowaways/sailfishos/sys
chroot /data/.stowaways/sailfishos/ /bin/su -
echo "nameserver 8.8.8.8" > /etc/resolv.conf
Code:
Procedures:
1) get cm 10.1 flash it.
2) recovery mode to flash it.
3) download my sailfish i9300 tar.bz2 from d-h.st
4) Copy it for your /extSdCard
Code:
Procedures inside adb:
1) sudo adb kill-server
2) sudo adb start-server
3) adb devices
4) adb shell
5) su
6) cd /extSdCard/
8) mkdir -p /data/.stowaways/sailfishos
8) tar --numeric-owner -xvf filename -C /data/.stowaways/sailfishos
9) mount -o bind /dev /data/.stowaways/sailfishos/dev
10) mount -o bind /proc /data/.stowaways/sailfishos/proc
11) mount -o bind /sys /data/.stowaways/sailfishos/sys
finally:
chroot /data/.stawaways/sailfishos/ /bin/su-
you'll see sailfish os version something 15
try this on it:
cd /
ls
[LINK] http://d-h.st/gX5 [/LINK]
See folders on it.
PS: I'll give more shots also more instructions very soon. Thanx.
Another PS: I'll give more news about Jolla sailfish os very soon.
But I need to tell this, I've got i9300 defconfig kernel for Jolla sailfishos very similar to defconfig i9305 kernel and I got it compiled with very success on hadk Ubuntu chroot on mine Ubuntu 14.04 LTS version.
astronfestmon said:
Hi there!
Following the hadk pdf from jolla porting guide.
I've got the sailfishos working on terminal android running. Booting on top attemptinh since yesterday tonight.
Code:
Procedures:
1) get cm 10.1 flash it.
2) recovery mode to flash it.
3) download my sailfish i9300 tar.bz2 from d-h.st
4) Copy it for your /extSdCard
Code:
Procedures inside adb:
1) sudo adb kill-server
2) sudo adb start-server
3) adb devices
4) adb shell
5) su
6) cd /extSdCard/
8) mkdir -p /data/.stowaways/sailfishos
8) tar --numeric-owner -xvf filename -C /data/.stowaways/sailfishos
9) mount -o bind /dev /data/.stowaways/sailfishos/dev
10) mount -o bind /proc /data/.stowaways/sailfishos/proc
11) mount -o bind /sys /data/.stowaways/sailfishos/sys
finally:
chroot /data/.stawaways/sailfishos/ /bin/su-
you'll see sailfish os version something 15
try this on it:
cd /
ls
[LINK] http://d-h.st/gX5 [/LINK]
sees folders on it.
Click to expand...
Click to collapse
Screenshots?
Sent from my SM-G900F using XDA Free mobile app
Fantastic... I'll give a try. Plz provide some more details, screenshots & new features from your currently running sailfish os. Thanx for sharing
i fed with adb commands & not able to flash
Uhm ... I gonna wait for this ...
Sent from my SM-G900F using XDA Free mobile app
how to install ?
When I had the rom for flashing in recovery. I'll explain it.
For now, it can be installed through the adb, to work it inside the android terminal.
astronfestmon said:
When I had the rom for flashing in recovery. I'll explain it.
For now, it can be installed through the adb, to work it inside the android terminal.
Click to expand...
Click to collapse
any update on this?
I followed the above procedure and I can see the Sailfish version and the files list from adb. What next?
EDIT: Just saw your PS in OP
In the end of the week probably I'll release the boot kernel working on.
astronfestmon said:
In the end of the week probably I'll release the boot kernel working on.
Click to expand...
Click to collapse
I've successfully built boot and recovery images, packed the zip for flashing in recovery but there is a problem with the boot.img.
I'm trying to find out why it doesn't boot (the phone stays at the galaxy logo)
The actual guide for porting misses some stuff and there are errors here and there. Besides, there is a problem with the trusty chroot, quantal is working.
Aye. I've notice that.
I'm fixing some issues in quantal chroot.
E.g. inside the sources.list I add the 12.04 lts mirrors. Made by a website with the sources.list for 12.04 lts mirrors.
Yeah. I've done the boot kernel image and it made the same as you.
But with meld diff I've compared the i9305 defconfig with mine i9300 defconfig.
I'm going to test it with the changes meld diff made with a comparison with i9305 defconfig.
Now I made a make systemtarball and I'll try a make bootimage or a make factory_image for it.
astronfestmon said:
Aye. I've notice that.
I'm fixing some issues in quantal chroot.
E.g. inside the sources.list I add the 12.04 lts mirrors. Made by a website with the sources.list for 12.04 lts mirrors.
Yeah. I've done the boot kernel image and it made the same as you.
But with meld diff I've compared the i9305 defconfig with mine i9300 defconfig.
I'm going to test it with the changes meld diff made with a comparison with i9305 defconfig.
Now I made a make systemtarball and I'll try a make bootimage or a make factory_image for it.
Click to expand...
Click to collapse
It would be great if you could make it to boot.
I will try to compile the kernel with CONFIG_CMDLINE="console=tty0" . I'm hoping that would direct kernel panic message to the screen so we could idenfity what the problem is with booting hybris-boot.img
So... Any development?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Hi! All of you! I'm doing efforts between these days. In these vacation days. I'll report more when I got home back.
astronfestmon said:
Hi! All of you! I'm doing efforts between these days. In these vacation days. I'll report more when I got home back.
Click to expand...
Click to collapse
Hi, I've also been trying to port sailfish os to i9300. I've been successful in creating an image that works, i.e. got it to boot into sailfish but there are some issues that I haven't been able to fix, like for instances, the wlan is detected but fails to establish a connection with any network, GSM is also not working. A full list with details can be found here https://wiki.merproject.org/wiki/Adaptations/libhybris
Maybe we should try to work together to get a fully functional sailfish os image
Cheers
---------- Post added 19th August 2014 at 12:01 AM ---------- Previous post was 18th August 2014 at 11:12 PM ----------
redrum781 said:
I've successfully built boot and recovery images, packed the zip for flashing in recovery but there is a problem with the boot.img.
I'm trying to find out why it doesn't boot (the phone stays at the galaxy logo)
The actual guide for porting misses some stuff and there are errors here and there. Besides, there is a problem with the trusty chroot, quantal is working.
Click to expand...
Click to collapse
The phone may be stuck at the galaxy logo, but there's a way to debug to find out what's wrong, follow this steps (only tested on linux):
1) connect your phone with the computer, the initramfs in boot.img will create a network interface (phone's ip is: 192.168.2.15) and enable a telnet deamon (default port: 23) and also a udhcp server, so luckily the computer will ask for an ip that everything will be set up automatically. If not try configuring static ip (192.168.2.20 and adding a route to 192.168.2.0)
2) telnet 192.168.2.15
3) when you're in the telnet session, you can check /diagnostic.log (i think) it will show why the boot failed. It is possible to execute commands into the init, by writing to (/init-ctl/stdin)
When logged into the telnet session it will dump a bit of information, be sure to read it as is useful .
Also check HADK 9.2 Operating Blind on an Existing Device
PS: the files may contain mistakes as I wrote this post without checking for the correct names (I don't have sailfish flashed at the moment).
Also consider visiting the IRC channel (#sailfishos-porters), if you're not doing it already
Hope it helps
rusty88 said:
Hi, I've also been trying to port sailfish os to i9300. I've been successful in creating an image that works, i.e. got it to boot into sailfish but there are some issues that I haven't been able to fix, like for instances, the wlan is detected but fails to establish a connection with any network, GSM is also not working. A full list with details can be found here https://wiki.merproject.org/wiki/Adaptations/libhybris
Maybe we should try to work together to get a fully functional sailfish os image
Cheers
---------- Post added 19th August 2014 at 12:01 AM ---------- Previous post was 18th August 2014 at 11:12 PM ----------
The phone may be stuck at the galaxy logo, but there's a way to debug to find out what's wrong, follow this steps (only tested on linux):
1) connect your phone with the computer, the initramfs in boot.img will create a network interface (phone's ip is: 192.168.2.15) and enable a telnet deamon (default port: 23) and also a udhcp server, so luckily the computer will ask for an ip that everything will be set up automatically. If not try configuring static ip (192.168.2.20 and adding a route to 192.168.2.0)
2) telnet 192.168.2.15
3) when you're in the telnet session, you can check /diagnostic.log (i think) it will show why the boot failed. It is possible to execute commands into the init, by writing to (/init-ctl/stdin)
When logged into the telnet session it will dump a bit of information, be sure to read it as is useful .
Also check HADK 9.2 Operating Blind on an Existing Device
PS: the files may contain mistakes as I wrote this post without checking for the correct names (I don't have sailfish flashed at the moment).
Also consider visiting the IRC channel (#sailfishos-porters), if you're not doing it already
Hope it helps
Click to expand...
Click to collapse
Will this os improve our device? Whats the pro and the con for a change (if it works finaly)?[emoji4]
MaxAndroided said:
Will this os improve our device? Whats the pro and the con for a change (if it works finaly)?[emoji4]
Click to expand...
Click to collapse
well maxAndroided all I can say at the moment is that the OS looks very promising... the UI is very smooth. Is another approach to mobile interaction based on gestures. I'm really loving it, sadly I can used it for day to day activities yet.
The jolla phone at the moment is able to run android apps and hopefully soon that will be available for any image built for android phones. So what that means is that if you don't find a suitable native app for sailfish os, you can always run your favorite android app in sailfish os
Anyone that wants to help bring sailfish os to i9300 is welcome to help, so if you have any idea on how to debug and fix the issues let me know
PS: if any one would like to try it, take a look at my previous post here
rusty88 said:
well maxAndroided all I can say at the moment is that the OS looks very promising... the UI is very smooth. Is another approach to mobile interaction based on gestures. I'm really loving it, sadly I can used it for day to day activities yet.
The jolla phone at the moment is able to run android apps and hopefully soon that will be available for any image built for android phones. So what that means is that if you don't find a suitable native app for sailfish os, you can always run your favorite android app in sailfish os
Anyone that wants to help bring sailfish os to i9300 is welcome to help, so if you have any idea on how to debug and fix the issues let me know
PS: if any one would like to try it, take a look at my previous post here
Click to expand...
Click to collapse
@rusty88, I am no developer/expert, but is there any way we can try and use I9300 native libraries or binaries to make GSM (or some other functionality for that matter) work? maybe RIL libs/binaries for GSM?
msri3here said:
@rusty88, I am no developer/expert, but is there any way we can try and use I9300 native libraries or binaries to make GSM (or some other functionality for that matter) work? maybe RIL libs/binaries for GSM?
Click to expand...
Click to collapse
yes @msri3here technically that is what i'm doing, its using RIL lib based on cm10.1.3 that was working fine before I flash sailfish, but on sailfish the log that RIL daemon dumps is really a mess and haven't figure out why is failing. One thing that I've notice is that RILD (one of its child process) creates the socket at /dev/socket/rild but it's killed afterwards, the sockets disappear and the process restarts all over again
Stracing RILD is not helping either as it seems that everything is Ok.
I'm trying to buy a new smartphone for day to day use so I can dedicate more time to debug on my i9300.
rusty88 said:
well maxAndroided all I can say at the moment is that the OS looks very promising... the UI is very smooth. Is another approach to mobile interaction based on gestures. I'm really loving it, sadly I can used it for day to day activities yet.
The jolla phone at the moment is able to run android apps and hopefully soon that will be available for any image built for android phones. So what that means is that if you don't find a suitable native app for sailfish os, you can always run your favorite android app in sailfish os
Anyone that wants to help bring sailfish os to i9300 is welcome to help, so if you have any idea on how to debug and fix the issues let me know
PS: if any one would like to try it, take a look at my previous post here
Click to expand...
Click to collapse
tried your rom but stuck on "samsung galaxy s 3 gt-i9300" screen nothing is happening plus if i touch the screen i get a response from the capacitive buttons but thats all
Hey Guys.
Don't know were to post this so I did it here...
I'm not an scripting/Unix pro and struggeling a bit with my folloing script:
Code:
FOLDER="/data/system/"
DAT1=$(date --date="$(date +%Y-%m-15) -1 month" +%Y%m)
FILE1="packages.xml-RW-"
FILE2="*.bak"
DELETE="$FOLDER$FILE1$DAT1$FILE2"
echo $DELETE
OUTPUT: /data/system/packages.xml-RW-201609*.bak (but only with UBUNTU)
File format is packages.xml-RW-201610161339144.bak - Bold is just an unusefull number for me....
Goal is to delete (I use for now echo for testing) specific file which having an specific format. I want to delete all files from last month!
So for this month all files containing "packages.xml-RW-201609*.bak"
Obove script is working under UBUNTU but Android has problems with "-1 month".
DATE command (of Android 6.0.1) is not accepting this...
Maybe one of you have a glue?
Thanks for help.
fluffi444 said:
Hey Guys.
Don't know were to post this so I did it here...
I'm not an scripting/Unix pro and struggeling a bit with my folloing script:
OUTPUT: /data/system/packages.xml-RW-201609*.bak (but only with UBUNTU)
File format is packages.xml-RW-201610161339144.bak - Bold is just an unusefull number for me....
Goal is to delete (I use for now echo for testing) specific file which having an specific format. I want to delete all files from last month!
So for this month all files containing "packages.xml-RW-201609*.bak"
Obove script is working under UBUNTU but Android has problems with "-1 month".
DATE command (of Android 6.0.1) is not accepting this...
Maybe one of you have a glue?
Thanks for help.
Click to expand...
Click to collapse
Instead of using a script have you taken a look at Tasker? It can do pretty much everything and scheduling the deletion of files with specific extensions is definitely something it can do. Let me know if you have any additional questions!
Thanks for your suggestion. I know Tasker. But I do not use it anymore. I want to keep the system as clean as possible... Don't like apps running in background all the time...
So only script is the way for me...
Question is still active ?
As it happens quite often I did it for myself But with an a bit different approach because of limited DATE functions of Android.
This set premonth correctly and also year switching to the year before if we are in JAN is working....
Code:
#!/system/bin/sh
FOLDER="/data/system/"
FILE1="packages.xml-RW-"
FILE2="*.bak"
YEAR=`date +%Y`
MONTH=`date +%m`
set -A MTH '12' '01' '02' '03' '04' '05' '06' '07' '08' '09' '10' '11' '12'
PREMONTH=${MTH[$((MONTH - 1))]}
if [ "$PREMONTH" == 12 ]; then
NEWYEAR=`expr $YEAR - 1`
else
NEWYEAR=$YEAR
fi
rm -rf $FOLDER$FILE1$NEWYEAR$PREMONTH$FILE2
#