recently,i have flash this rom
http://forum.xda-developers.com/showthread.php?t=1271512
when i want to root my phone,i found that i cant connect my phone to computer what should i do,also my phone cant connect to my very stable wifi.
What should i do
pls help me!
psp1987 said:
recently,i have flash this rom
http://forum.xda-developers.com/showthread.php?t=1271512
when i want to root my phone,i found that i cant connect my phone to computer what should i do,also my phone cant connect to my very stable wifi.
What should i do
pls help me!
Click to expand...
Click to collapse
I had the same problem with my ST15i.
i wanted to flash to 4.0.1.A.0.283 and for rooting i had to use DooM Kernel for Last firmware (4.0.A.2.368). your problem is the same.
After Flashing new Firmware, while phone is off, connect it to fastboot mode and run command to flash boot.img (that's all in your link).
when completed, turn on your phone and go to:
Menu > Settings > Sony Ericsson > Connectivity
you can change usb mode to MSC so that Pc and then SuperOneClick will recognize it. (phone doesn't show any icon but pc will recognize)
after rooting via superoneclick you should get back to new firmware Kernel. again via fastboot mode and run flash kernel.sin
when done turn on your phone and it's fixed
you can read this thread (for ST15i) and do the same steps for your Ray: http://forum.xda-developers.com/showthread.php?t=1279774
Have you installed the drivers for fastboot/flashmode for the Ray? Pc companion only installs ADB drivers, but you need additional ones for fastboot to work. You can find them here on xda or sony bootloader unlock site . Also make sure that usb debug is enabled for rooting with superoneclick (version 1.7 works).
Thanks it works now
Sent from my Xperia Ray using XDA App
Can anyone upload firmware file for Ray's 4.0.2.A.0.42?
.: SID :. said:
Can anyone upload firmware file for Ray's 4.0.2.A.0.42?
Click to expand...
Click to collapse
it's all here i think:
http://forum.xda-developers.com/showthread.php?t=1316070
Hi all. I need help.. I've installed Doomkernl with ICS sotck firmware on the phone because I didn't read it was incompatible. Now it stuck at the boot screen and I can't do nothing. There is something I can do to repair it??
Flash only the kernel using flashtool, ics firmware
Tapatalked !
So I have to download the stock firmware and flash it? But I can do this when my phone is on and can't go in recovery mode? And also I cant install USB drivers..
Download and install flashtool. Then install drivers from the flashtool directory. Read the tutorial on how to use it
Tapatalked !
I did, I installed the driver with flashbot for xperia s but when i connect the device it tell me that can't install MTP USB driver. And I also need to turn off the phone but the power button doesn't work..
Hold the power and volume up button for 10 secs to power off. As for the drivers uninstall and reinstall flashtool and see if it works
Tapatalked !
Thanks for your help. I have installed an ics kernel in fastboot mode but when I rebooted I had black screen. So I have turned off the phone and connected in flashboot mode but it didn't install the driver. I reinstalled driver in the folder and tried to connect again but now the pc desn't recognize the device..
I tried again and this time it worked! The phone is restored. Thanks a lot for your help
As you've already got the answer to your query, I'm closing this thread.
Post in the Q & A section next time.
Hello everyone,
Yesterday I have bricked my Sony Ericsson Xperia Neo (MT15i, Stock ICS .431 kernel). I was ready to install a custom ROM from CWM, I wiped the battery status, I made a factory reset, then I tried to install the ROM from SD card, but the ROM wasn't there because I am dumb and I forgot to put it in SD. So I restarted my phone and discovered that my phone was bricked.
It freeze at Sony logo (it doesn't make a bootloop) and I can't enter in CWM. It was not the first time when I bricked my phone, so I knew that I have to reflash the original kernel. I opened FlashTool but it says it needs the drivers installed, so I installed them from Flashtool/drivers folder but I get the same message. I tried to install also the adb drivers and the drivers from Sony's site but nothing changes.
The problem is that I can't use flashtool.
Some aditional informations:
- my phone was rooted ;
- my phone had the bootloader unlocked ;
- my phone was running the Stock Android ICS firmware (.431) ;
- my phone was rooted and bootloader-unlocked from the same PC, but a different OS ;
- the adb drivers were not installed on my current PC (I have reinstalled Windows so I don't have the drivers installed) ;
Is there any solution for me to unbrick my Xperia Neo?
I couldn't find any way to unbrick it.
I put some screenshots to see what I see.
Since you have unlocked bootloader you can flash a kernel so that you will get cwm back... From there install rom you wanted...
Or try using flashtool from a different computer...
Sent from my Xperia Neo V using xda app-developers app
R: [Q] I can't use Flashtool to unbrick my Xperia Neo
If you have done what you have writtten it should be not bricked, just phone cannot load system because you have erased it with factory reset.
So now if you have bl unlocked the fastesr way is to get a kernel with cwm inside to install a rom compatible with that kernel (try suave v6 or lupus or night elf for ICS). To flash kernel you have to get fastboot drivers then use flashtool or command line.
The other way is to flash a whole stock firmware with flashtool in flash mode, then do what you want.
The flashtool problem seems to be missing drivers, so my hints are:
-try to change usb port
-try to change usb cable
-try to reinstall flashtool flashing drivers (you should find it into flashtool folders, if you can't then search over the internet)
-try to reinstall fastboot drivers (when you have drivers you need to disable windows driver signature check to install it, search the internet how).
Are you trying to flash a firmware connecting phone in fastboot mode (blue light)? If so you are wrong, to flash a firmware you need to enter in flash mode (green light). I'm saying this because I see S1tool driver in windows and that is shown (as I know) when you connect phone in fastboot mode.
If this is not working I don't know how to help you.
Sent from my MT15i using xda app-developers app
Solved!
Bertellio said:
The flashtool problem seems to be missing drivers, so my hints are:
-try to change usb port
-try to change usb cable
-try to reinstall flashtool flashing drivers (you should find it into flashtool folders, if you can't then search over the internet)
-try to reinstall fastboot drivers (when you have drivers you need to disable windows driver signature check to install it, search the internet how).
Click to expand...
Click to collapse
Thanks man, I really really wouldn't understand how to fix my phone without your help
Here is what I did and what happened:
1) I installed the following drivers from Flashtool/drivers/Flashtool-drivers.exe
- Sony Ericsson Xperia arc, neo etc. ;
- Flashmode Drivers ;
- Fastboot Drivers ;
2) I chose "MT15_4.1.B.0.431_Global.ftf", the stock ICS kernel from Sony ;
Connected in flashmode (GREEN LED) ;
Windows updated automatically S1Fastboot ;
Flashing failed!
3) Chose "MT15_4.1.B.0.431_Global.ftf" (the same kernel) ;
Connected in flashmode (GREEN LED) ;
Flashing succeeded!
4) Boot up - finaly see the XPERIA logo.
I solved it in 10-15 minutes, the first boot took like 3 minutes. So simple!
The flashmode and fastboot drivers were missing.
I lost my root and I have relocked my bootloader during this but it's not a big deal, I can anytime get them back. Also I had a ROM backup in SD card, made with CWM, so I can get them back.
Hope someone with the same problem will see!
Thanks again Bertellio!
Hi guys,
I'm not an Android expert, but AFAIK is a Linux system.
I'm quite familiar with Unix/Linux world and wondering if there's a way to see the messages during boot just like on a console?
I'm asking, beacause my ray hangs at sony-ericsson logo, and can't figure out what's wrong with it.
Thank you!
to solve problem .. flash your stock .ftf again with flashtool
Well u can use adb for that...use adb logcat...search in xda if u don't know how to use adb...it will give u a complete log as u need
Cheers,
AJ
Mohamed Hashem said:
to solve problem .. flash your stock .ftf again with flashtool
Click to expand...
Click to collapse
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
nroberto13 said:
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
Click to expand...
Click to collapse
i think usb debug will not work anyway if ur phone powered off
try to flash custom kernel again , then u will have CWM , then remove your SD Card and put it in reader , then put any ROM in it , then put it again in ur phone , then flash it with CWM , i made that before with CM ROM & it worked :good:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
nroberto13 said:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
Click to expand...
Click to collapse
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
mihahn said:
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
I flashed a custom rom.
Actually, i was on ICS, and wanted to try custom GB illuminative.
Flashed the v10, everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash some times the rom without issues, but the last was unlucky .
By that time, my BL was locked, so I had to root my phone to install cwm.
Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the process over and flashed GB .42, rooted with doomlord, script, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
basically these were the steps I was doing, and after a cwm flash of the custom rom, the phone ended hanging at sony logo.
I then tried different kind of stock firmwars ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flash a version of the illuminative custom rom which was working before, but still the sam. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same.
now, cwm is gone, as stock kernel overwrote the custom one.
That's the story .
As i remember i can enable usb debug even phone not boot to system. By charging phone with pc(not standard charger) then hold power button and at windows(or else) will ask for driver
Ps. I did that with X8, didn't know with 2011's phone.
Sent from my ST27i using xda app-developers app
Hmm okay you could try to flash the unbricking ftf (you can find it in someguyfromhell's sticked thread) and afterwards stock gingerbread or ics again, but I don't know if that could work or maybe make it even worse (normally it's to unbrick if you did an ota update on unlocked bootloader, but let's see). Maybe it's worth a try
The problem about cwm that's gone: if you are still able to boot into fastboot mode, you can flash another kernel and for example try to install cyanogenmod or any other rom. Just try cm10 or cm10.1. Maybe in the end a rom will boot
Sent from my SK17i running stock ics (.587)
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
nroberto13 said:
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Click to expand...
Click to collapse
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
eswawan said:
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
yes, it goes to offline charging mode!
mihahn said:
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
nroberto13 said:
yes, it goes to offline charging mode!
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
Click to expand...
Click to collapse
With the procedure I posted above it shouldn't simply boot to offline charging mode, so maybe it is a driver problem. Try it step by step like posted above, maybe it could work. If not it was worth a try
Sent from my SK17i running stock ics (.587)
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
PS. not sure if it's right, but when I connect the phone to pc, connects in flash mode, even if I don't hold vol down, the notification led is solid green, then the led turns off, Sony Ericsson appears, then the battery with the power sign and finally notification led turns orange. when I short press power button now, the battery with power sign shows up on screen.
nroberto13 said:
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
Click to expand...
Click to collapse
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
mihahn said:
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Sorry, I think I wasn't clear enough. I thought I should be connecting the phone without holding any of the volume buttons, just to try if it's charging in offline mode. Here's the exact status.
1. If I do not hold any volume buttons, the phone goes into flash mode ( solid green led ), and after a short while ( 20-30 sec ) led turns off, Sony Ericsson logo shows up, then goes away and battery with power sign is displayed when I short press the power button
2. if I hold vol down, phone behaves the same way as at 1.
3. if I hold vol up, phone goes in fastboot mode ( solid blue led ) and stay solid blue, it is not going into charging mode.
Abhinav2 said:
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
Click to expand...
Click to collapse
I may not be clear enough here either. I didn't use sus after unlocking BL, I know it bricks he phone, anyway, I did flash the unbrick ftf mentioned by mihahn. here are the steps I did so far :
1. I was on ICS ( Iced Bean 3.4 ) , with BL lockedand phone rooted and wanted to try custom GB illuminative.
2. I flashed the rom with cwm, and everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash the rom several times, without issues, but the last was unlucky .
3. Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the rooting process over and flashed GB .42, rooted with flashtool, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
4. and after a cwm flash of the custom rom, the phone ended hanging at sony ericsson logo.
5. I then tried different kind of stock firmwares ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
6. afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flashed a version of the above mentioned GB illuminative custom rom which was working before, but still the same.
7. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same, now, cwm is gone, as stock kernel overwrote the custom one.
8. tried to flash someguyfromhell's unbrick ftf, which is for the FOTA brick whith BL unlocked, as I understood.
9. reflashed stock GB .42 with flashtool, but phone still hangs at sony Ericsson logo.
In this status, could I connect to the phone using adb, so I could do a adb logcat ?
If so, please advise how.
Thanks.
@nroberto13 Do you mind telling us which ftfs u flashed?
Cheers,
AJ
Hi there,
I have a rooted xperia u with unlocked bootloader. I've tried to install the cm9 following a guide where the requirement of the installation was having an original Sony firmware installed on the device. I didn't saw that requirement, and I installed it with a custom rom on my phone. So after flashing the kernel I turned on my xperia...
Bricked.
It made only the vibration but no Sony logo appeared. So, I connected it in flashmode on my computer (with windowsXP) with green led working, but flashtool gived me the message that I must install the phone drivers (even if I had already installed them on my pc). I tryed to reinstall them but nothing canghed.
I also tried to connect the phone on a windows 7 pc always with flastool (and drivers installed) but in that case neither fastboot mode or flashmode, nor any vibration was working (pc doesn't detect it).
I tried to connect the phone with removed battery or also a reset with power and volume up buttons but nothing...
It's still like this, with fastboot mode or flashmode not working with any pc... :crying:
Is there anything that I can do?
Thanks in advance.
Head to Sony service centre
Hit thnx
Sent from my ST25a using XDA Premium 4 mobile app
daddets97 said:
Hi there,
I have a rooted xperia u with unlocked bootloader. I've tried to install the cm9 following a guide where the requirement of the installation was having an original Sony firmware installed on the device. I didn't saw that requirement, and I installed it with a custom rom on my phone. So after flashing the kernel I turned on my xperia...
Bricked.
It made only the vibration but no Sony logo appeared. So, I connected it in flashmode on my computer (with windowsXP) with green led working, but flashtool gived me the message that I must install the phone drivers (even if I had already installed them on my pc). I tryed to reinstall them but nothing canghed.
I also tried to connect the phone on a windows 7 pc always with flastool (and drivers installed) but in that case neither fastboot mode or flashmode, nor any vibration was working (pc doesn't detect it).
I tried to connect the phone with removed battery or also a reset with power and volume up buttons but nothing...
It's still like this, with fastboot mode or flashmode not working with any pc... :crying:
Is there anything that I can do?
Thanks in advance.
Click to expand...
Click to collapse
As I understand you flashed only kernel for CM9? And it happend?
Cwikla said:
As I understand you flashed only kernel for CM9? And it happend?
Click to expand...
Click to collapse
Sorry Cwikla, I didn't flashed the kernel, but the rom. I wrote it wrong.
Try getting into fastboot. Even without drivers, you might be able to do so. Bring up the fastboot menu in flashtool, then plug in your phone in fastboot. Quickly hit reboot into fastboot (via fastboot). Then flash another kernel and restore a nandroid backup(if you have one)