Hello everyone.
First of all, sorry about my English because I'm not a native speaker.
I have a phone model - HTC One X+ Plus PM63100 for AT&T 64GB - with cracked screen.
I found out that my phone has SONY display version ( http://forum.xda-developers.com/showthread.php?t=2164760 )
Wanted to replace digitizer with front panel and order it from here http://www.etradesupply.com/oem-htc...embly-with-front-housing-and-light-guide.html but person who answered my question about compatibility said that it is not compatible with my phone model.
However, there is a one customer review under that replacement part which says that "it turned out to be uncompatible with my HTC One X+ international version. I do not know why this is the case but it is what it is."
In wiki http://en.wikipedia.org/wiki/HTC_One_X it seem international X+ and AT&T version are same size.
I'm very confused and desperate, searching more than 2 months and can't find which replacement part fits my phone.
Please advice what to do or purchase.
Also, are both X+ models - S728e?
Thank you beforehand.
cracked screen
I was in a similar situation some time back, when my Telus unlocked HOX+ 64 Gb dropped and the screen cracked.
I gave it to a local repair guy, he ordered a HOX screen first and then realised that HOX+ has a little different hardware (some screws were in different places). hence, HOX and HOX+ are slightly different builds. Also, the international HOX+ and AT&T/Telus HOX+ are also different I suppose. Firstly the they have red coloured capacitive buttons at the bottom (also there is no red ring around the camera at the back).
The part shown in your link seems to be the same one that I have, so i think it should be compatible.
nrshastri said:
Also, the international HOX+ and AT&T/Telus HOX+ are also different I suppose. Firstly the they have red coloured capacitive buttons at the bottom (also there is no red ring around the camera at the back).
The part shown in your link seems to be the same one that I have, so i think it should be compatible.
Click to expand...
Click to collapse
Thank you for response.
I don't care about button colors, even logo. I just want to purchase match display. Could you please (if it is possible of course) ask your local repair guy what was the model he replaced for your phone? Even link will be very helpful for me.
Thanks againt
I've been using my phone since i quite badly cracked it last month. Touch screen is still working fine and i may not even get the screen fixed.
Only thing i'm worried about is if the device is less waterproof now i have large cracks in it....:/
Sent from my HTC One X+ using Tapatalk
hi thisaint,
i checked with my local guy, but sorry, he doesn't seem to have any clue regarding the model number or the actual source of the panel. most these repair guys here have a trader/distributor from whom they get all kinds of accessories required for repair and they hesitate to give out the details fearing loss of business.!
cracked display
nindo said:
they hesitate to give out the details fearing loss of business.!
Click to expand...
Click to collapse
Dear friend,
thank you for response.
I'll be happy to be in Mumbai or even in USA to repair my phone but unfortunately I live in another country. )
I had a hope to see my phone repaired before this christmas but it seem I'll meet holidays without it
Solved
Hello everyone.
Finally I have found a replacement lcd screen digitizer frame assembly at ebay/com.
Seller assure me that his SHARP screen is interchangeable with my previous SONY screen and I risked and purchased his item for 65 USD.
(insert ebay com) /itm/LCD-Display-Touch-Screen-Digitizer-Frame-Front-Cover-For-HTC-ONE-X-Plus-S728E-/251348208725?pt=LH_DefaultDomain_0&var=&hash=item3a85854c55
I'm using it without any issues, however screen buttons are red , that's all difference with original.
Related
I dropped my tablet corner first and the lower left corner smashed and the corner of the glass broke in lots of pieces
now my screen has 2-3 big cracks over it. Does anyone know where I can get it repaired in Asia or if in the US who can I contact for pick up, estimates and other stuff.
Go to Sony website to check out local Song Corp in Asia for services.
I asked our sony service centre in saudi arabia .a screen replacment costs about thesame price of a new tablet !
But may be cost varies from a country to another.
If you can't fix it, Id get a galaxy tab or galaxy note 10.1. Im dissapointed in my Sony Tablet. The only feature I lack on other tablets is the IR remote, which I sadly can't use as I don't have anything that uses it.
rjsmith2007 said:
If you can't fix it, Id get a galaxy tab or galaxy note 10.1. Im dissapointed in my Sony Tablet. The only feature I lack on other tablets is the IR remote, which I sadly can't use as I don't have anything that uses it.
Click to expand...
Click to collapse
Oh wow. This is ultra helpful. Moron.
rjsmith2007 said:
If you can't fix it, Id get a galaxy tab or galaxy note 10.1. Im dissapointed in my Sony Tablet. The only feature I lack on other tablets is the IR remote, which I sadly can't use as I don't have anything that uses it.
Click to expand...
Click to collapse
How do you not own anything that uses IR? I find that impossible, how you can have a tablet but not a TV as all TVs use IR...
Sent from my HTC Desire using xda premium
I chatted with the Sony US (that's where i bought mine) and they kept referring me to a repair number which i can't call coz im not in the US and IDD costs. my local service center sucks
dohanotoha said:
I asked our sony service centre in saudi arabia .a screen replacment costs about thesame price of a new tablet !
But may be cost varies from a country to another.
Click to expand...
Click to collapse
The sony service center in my area doesnt repair tablets does the screen replacement include labor?
If you have replaced your screen already then this is not nessasary but here is my plan for if my screen will crack:
Just send it back with the message that you had the little black cord attached on it, the one that comes with the tablet, and tell them that your cord snapped
just like that, nothing you can do about it you could give it a try right?
kazshizka said:
I dropped my tablet corner first and the lower left corner smashed and the corner of the glass broke in lots of pieces
now my screen has 2-3 big cracks over it. Does anyone know where I can get it repaired in Asia or if in the US who can I contact for pick up, estimates and other stuff.
Click to expand...
Click to collapse
That could work. it would party be their fault that my screen broke. I'll try that
Mahaco said:
If you have replaced your screen already then this is not nessasary but here is my plan for if my screen will crack:
Just send it back with the message that you had the little black cord attached on it, the one that comes with the tablet, and tell them that your cord snapped
just like that, nothing you can do about it you could give it a try right?
Click to expand...
Click to collapse
lol that's why honest people with genuine faults have such a hard time getting warranty claims honored ^^
:crying: I have HTC One X+ 64gb Telus which is rooted,s-off and boot loader unlocked. I am using Elegancia 6.2.0. I don't know what happened to it. Suddenly Capacitive buttons are not working as light are working. In past it never dropped and I Nevar sit on it. I don't know why it happened. Now i am using LMT launcher from which I am not satisfied and thinking about repairing it. In my city there are no HTC service center but there is a collection point(I don't know what it is??? ) . I searched about this on Internet and found that it may be problem of Digitizer. So, My questions are:
1. By replacing LCD+Digitizer would solve this problem? If yes, then which variant should I buy SHARP or SONY version? As mine is Telus version.
2. Should I go to Collection Point in my city ?
3. Or should I take risk of doing dis-assembly of it ?
4. Or Should I buy a LCD+Digitizer from internet and do replacement by local mobile repairs?
PS: I bought it 2 months ago from ebay and it doesn't have manufacturer warranty. And sorry for my bad english
Bring it to an authorized repair shop or contact HTC and ship it in. Make sure that it is actually a hardware problem, and then have them replace it.
Try not to replace it yourself, there is a ton of adhesive and you might damage the phone as you need to use a suction device to remove the screen.
(I do believe the buttons are part of the lcd/digitizer assembly, but you might want to check with HTC support)
If you want to save money, https://play.google.com/store/apps/details?id=com.fatedevgroup.softkeyenabler&hl=en will get you on screen buttons
I replaced a smashed screen and damaged LCD on an LG Optimus L90 D415 (T-Mobile) and the digitizer is responding in a mirror-image fashion. That is if I touch an area on the right side of the screen, the touch is registered in the same congruent location on the left and vice versa. This is consistent across the whole area. I turned on the Pointer Location in the Developer's Option and it did show the trace on the opposite side. Could this be a firmware issue rather than a hardware defect or damage?
I'm a phone repair technician, and I am comfortable with the repair I made. There was no damaging mistake in the installation. Visually, the part looked fine. And there was not mistake like a reverse or upside down connection (not possible with the design of this phone).
I don't know the history of the phone but TWRP and a custom ROM had been flashed to it. (Thunder XBlast? I think) . I then flashed Cyanogenmod 11 and then flashed a stock ROM that didn't include stock recovery or bootloader. With all three ROM's the same problem occurred.
The problem didn't seem consistent with a physically damaged or defected digitizer - no ghost touches, dead zones or inconsistent behavior. So because it had been rooted and a custom ROM flashed I thought it may actually be a firmware issue, so I brought it to this forum. Any ideas?
did you happen to solve the problem with the Lg L90 digitizer being mirrored? I'm experiencing the exact same problem with the LG L90 T Mobile version that I replace the digitizer on. I put a white one on as opposed to the black that it originally had from the manufacturer and was purchased on ebay and shipped from Westminster, Ca- I'm leaning towards it being a defective part-please let me of any solutions you came by-thank you so much for your time (phone is stock, not rooted)
Unfortunately, I have not found a solution to my digitizer problem, but your information is quite helpful. I too opted to get the white screen version off eBay from a company in Westminister, CA. It was what was most available and best priced. And the listing claimed it was compatible with D405 and D415. Mine is the T-Mobile version and was factory black. It appears then that it may not be a defect issue but a compatibility issue. And apparently it's not an effect from rooting or flashing a custom ROM since the same thing happened on your device that wasn't rooted. It would be nice if there was a software fix that would render it compatible. Incidentally, I paid around $30 for both the LCD and digitizer. Looking back on eBay just now I noticed the company has bumped the same parts up to almost $90. I'll have to check and see if I can still get an RMA and send it back. Let me know if you have any luck.
Sent from my Nexus 7 using XDA Free mobile app
Having the same issue here, purchased the black ebay version from a seller in MO and installed today. Are the contacts on the small ribbon cable reversible?
Installed on an unrooted tmobile L90 D415, bought the phone about 3 weeks ago before it dropped (my case came in the mail that same day).
Im wondering if there's a "good" version of this digitizer available, wouldn't mind paying a few more bucks on a part that actually works correctly.
Hey guys,
So I am posting on behalf of my dad. He recently dropped his phone and broke the screen. And while he tried to use his one UH OH that he had...apparently service to him was significantly less then stellar, and after a week of 2 hours holds on the phone, credit card holds, and being transferred to god knows where, he finally gave up and is resorting to trying to get the screen replaced himself. His one question is, he was told by a screen repair company that his particular model (OP6B12O) is not a true AT&T version, and was some weird "International" AT&T M8. What I would like to know is...is this true? And does it really matter? I don't imagine the display assembly is any different between models, and if so...wut. Any advice?
hi all
my name is matt
and i am having epic problem fixing a digitizer for my phone i have no issues changing the digitizer at all have done 5 times already
yet every part i get are all FAKE beware of fake lcd and digitizers on the open market guys.
i am after a genuine part all the others either dont works as should or only do so for a short period of time and also break extreamly easy.
please help as htc illigally decide to monopolize on there repair market and i can not go without my phone for this long
htc desire 610 EU version rooted with jmz and custom rom
Don't know man, sounds like your out of luck
Sent from my HTC Desire 610 using XDA Free mobile app
I have used this seller on ebay for parts before, all have been genuine.
Delivery takes a while as comes from China.
Just check that they will match your version, I know the AT&T variant is different to the EU on screen I think.
Good Luck!
http://www.ebay.co.uk/itm/OEM-LCD-D...-Frame-For-HTC-Desire-610-White-/261803598009
http://www.ebay.co.uk/itm/OEM-LCD-D...-Frame-For-HTC-Desire-610-Black-/251869445820
http://www.ebay.co.uk/itm/Full-LCD-...-Frame-For-HTC-Desire-610-White-/261718403528
http://www.ebay.co.uk/itm/Full-LCD-...-Frame-For-HTC-Desire-610-Black-/251775391866