hi,
i cannot connect to odin when in download mode... i tried different cable and usb port but nothing, i opened the usb debugging mode .
but still nothing . all drivers are installed, i hear the ding while connecting the usb cable but odin shows nothing
help please
Make sure kies isn't installed on the same machine, try another pc. Lots of similar threads, search for other solutions.
Sent from my GT-I9300 using Tapatalk
Related
Hello everyone,
I've searched for a solution over the forum but I didn't find any solution..
So my problem is that I can't use Odin because windows doesn't recognize my phone on Download mode.
I have the drivers installed, Kies and windows recognize my GS2 without problems.
I've tried with different cable, different USB port, uninstall/reinstall drivers many times, from Kies or from samsung web site.
I just have no idea why in download mode windows doesn't use the installed drivers..
Help?
Thanks!
Did you try in a different PC?
I am sure driver is the only cause. Perhaps you can try following. Install Kies, then connect phone once and check if Kies detects your phone
Which version of Windows are you using? I am using Windows 7 and its working fine. I did root yesterday and Windows detected drivers and also it had to download from net for some reason. In the end it did work
USB cable to main board connection .
Reboot phone turn USB debugging off .
Set USB to Mass storage mode .
Connect cable and let Windows find USB drivers .
jje
Did you terminate every Kies process before opening Odin?
Hello,
Thanks for the answers.
I'm running on windows 7 64. But it didn't try on another pc.
Windows does install drivers and recognize my phone in USB to Mass storage mode.
But still not recognize it in download mode and yes I've terminated every Kies process.
I know that in Download mode windows install some new/different (?) drivers. When I'm on download mode, windows fails to install driver as it's an "unknown device". Is there a way to install those drivers manually?
Hello,
Un-install Kies, reboot system, reinstall kies.
Still not work. After reboot and reinstalling Kies my phone was recognized, but in download mode there is still nothing.
If windows has USB drivers then download mode works .
Is USB debugging turned off .
Reboot phone
Enter download mode follow instructions on download mode screen .
Open Odin select files to flash
Connect Samsung USB cable to mainboard port .
Hit start on Odin .
jje
USB debugging is off.
But as windows don't recognize the device, Odin can't detect it in download mode.
It's really weird
messem said:
USB debugging is off.
But as windows don't recognize the device, Odin can't detect it in download mode.
It's really weird
Click to expand...
Click to collapse
Post the steps you are taking from the very beginning .
jje
Ok, I manage to get this working.
I did this:
-I have unplugged all the USB on my motherboard, I've uninstalled all the "Universal Serial Bus controllers" (to acces type devmgmt.msc in windows start menu)
-Turn off the PC and unplugged the power supply. Waiting like 3 minutes.
-Replug the power supply and boot.
-Replug all my USB, windows reinstalling everything.
-Plug my phone in download mode and windows finally installed the drivers and Odin detect it !
So if someone have a unknown device issue with a code 43, please try this.
Thanks for your time and answers.
Disabling the "unknown device" and then disconnecting and reconnecting my phone worked for me.
Run Kies as Administrator, Install Drivers
This is what worked for me. Kies said the Drivers were installed without Administrator but nothing worked
JJEgan said:
USB cable to main board connection .
Reboot phone turn USB debugging off .
Set USB to Mass storage mode .
Connect cable and let Windows find USB drivers .
jje
Click to expand...
Click to collapse
This fixed the problem for me thank you very much !
Hi,
I have a 9100 that I try to make windows 7 x64 detect. I tried with the drivers and even with kies but the phone is simply not detected as if it was not connected with the usb cable. I played with debug on/off, and mount button but nothing worked.
I can charge the battery with the usb cable but cant xfer files, its only charging the pone, nothing else.
Any idea of what could be the problem ?
Install usb drivers via kies.
jje
Sent from my GT-I9100 using XDA Premium App
Hi,
I already done that, still no detection, its not even telling unknown device.
Just as any other windows hardware reboot phone reboot PC .
Boot phone set to USB mode in settings connect cable wait for windows to install drivers .
KIES tools Install driver .
That fails read all the other exact same posts for a solution .
jje
It was the usb cable the problem. I changed it, now its working, thx for the help.
Hi to everyone. I can't root my sgsII because odin won't recognize it in download mode. I have kies, drivers, debugging on and all what is needed. When phone is turned on odin recognizes it. Can anybody help?
Did you shutdown kies while trying to flash?
Turn debugging off turn phone off open Odin with Kies closed .select file
turn phone on in download mode read screen connect usb cable flash .
jje
brdozgd said:
Hi to everyone. I can't root my sgsII because odin won't recognize it in download mode. I have kies, drivers, debugging on and all what is needed. When phone is turned on odin recognizes it. Can anybody help?
Click to expand...
Click to collapse
Close Kies from the system tray.
It is closed but again same problem
Are you using a HTC or Nokia usb cable?
1. use the original cable
2. kill all kies* pocesses in task manager
3. kill/shutdown all other htc/nokia/whatsoever software if present on your PC
4. try different USB plug (my friend had such problem with odin)
5. try different PC ;-)
should work...
Hi,
I think the usb port on my sgs2 is f***** It will send a charge to the phone, but will not recognise it.
I get error on my vista laptop as :
USB DEVICE NOT RECOGNIZED - One of the usb devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
I have tried reinstalling usb drivers on kies and put in debugging mode etc. I had a problem with the phone not charging around christmas time, so I cleaned the usb port with a cocktail stick, that got the charge working, but it has not picked up usb mode since. So I cant connect usb storage or to ODIN, let alone KIES.
Does anyone have any advice/suggestions as to what I could try, I really dont want to send it back for repair and be handset less for a month!
daz_2000 said:
Hi,
I think the usb port on my sgs2 is f***** It will send a charge to the phone, but will not recognise it.
I get error on my vista laptop as :
USB DEVICE NOT RECOGNIZED - One of the usb devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
I have tried reinstalling usb drivers on kies and put in debugging mode etc. I had a problem with the phone not charging around christmas time, so I cleaned the usb port with a cocktail stick, that got the charge working, but it has not picked up usb mode since. So I cant connect usb storage or to ODIN, let alone KIES.
Does anyone have any advice/suggestions as to what I could try, I really dont want to send it back for repair and be handset less for a month!
Click to expand...
Click to collapse
I am Sure no problem with your mobile. May be problem with computer Hardware or Drivers.
can you try different USB port or you can different computer also.
If you dnt have another PC , uninstall all samsung drivers & kies and reboot the PC.
Just connect as USB storage . USB storage not require any special drivers.
Also use the original usb cable. I have two different cables and only original one works.
Sent from my GT-I9100 using XDA App
I have the same issue, if your not rooted just Send it for repair under warranty but if you are you'll have to flash a stock kernel to remove root first and use a jig to reset your flash counter
Sent from my GT-I9100 using xda premium
Had the same problem, http://forum.xda-developers.com/showthread.php?t=1425128my cable was the culprit.
Mobile Odin for flashing and Remote Web Desktop/Root explorer for SD access will tide you over.
Sent from my GT-I9100 using xda premium
Make sure:
The selection of AP/BP connection behavior
when connecting your phone (as a client), with a USB cable
to a PC host, is manually set in the PhoneUtil (PU) Menu.
This sets the behavior of your phone when connecting it
to a PC. You can select wether you like it to act as a
Modem or PDA, o via USB or UART port. The PU does not
seem available from the ServiceMode menu.
Dial: *#7284#
Code:
UART:
[o] MODEM*
[ ] PDA
USB:
[ ] MODEM
[o] PDA*
* is default SGS2 setting.
Hi,
i am trying to flash TWRP on my windows 10
1. i have enabled USB debugging mode and OEM Unlocking
2. I have installed latest samsung USB drivers SAMSUNG_USB_Driver_for_Mobile_Phones_ver_1.5.65.0 (and uninstalled them, reinstalled them 5 times with reboot...) i have even tried the 1.5.63...
3. I start ODIN in admin mode 3.13.1
4. I get my S3 in download mode
5. Plug the USB... and nothing in ODIN no ID:com
Im a bit stuck, please help
UPDATE > SOLVED, the problem was the original USB C cable... i ve tried with my S9+ cable and it worked thanks
pouply said:
Hi,
i am trying to flash TWRP on my windows 10
1. i have enabled USB debugging mode and OEM Unlocking
2. I have installed latest samsung USB drivers SAMSUNG_USB_Driver_for_Mobile_Phones_ver_1.5.65.0 (and uninstalled them, reinstalled them 5 times with reboot...) i have even tried the 1.5.63...
3. I start ODIN in admin mode 3.13.1
4. I get my S3 in download mode
5. Plug the USB... and nothing in ODIN no ID:com
Im a bit stuck, please help
Click to expand...
Click to collapse
Odin can be finicky. If you're using a pc use the USB ports on the back of the computer, not the front. Try different USB cables. Those are the two typical areas that cause issues with Odin.
Sent from my [device_name] using XDA-Developers Legacy app
Thanks for the tips, i tried on 2 laptops, 6 USB total and always with the original USB charging cable.. still nothing on ODIN its driving me nuts