Hi guys,
Guys have a big problem. Okay so I have an HTC ONE Google PLay Edition, that I have managed to get the bootloader unlock. I think I was able to also root but not fully sure. So fast foward today I get the OTA update for the 4.4 and all hell breaks lose. I install it and restart and all i get is blue screen so it wont load. This is also affecting me to be able to connect to my computer because it wont recognize my phone(which was working before this happen) with ADB. BTW, my phone does show S-ON. Can you all please help .Thanks!
FYI also tried wiping using TWRP to wipe my phone and it doent work.
Debizzle said:
Hi guys,
Guys have a big problem. Okay so I have an HTC ONE Google PLay Edition, that I have managed to get the bootloader unlock. I think I was able to also root but not fully sure. So fast foward today I get the OTA update for the 4.4 and all hell breaks lose. I install it and restart and all i get is blue screen so it wont load. This is also affecting me to be able to connect to my computer because it wont recognize my phone(which was working before this happen) with ADB. BTW, my phone does show S-ON. Can you all please help .Thanks!
FYI also tried wiping using TWRP to wipe my phone and it doent work.
Click to expand...
Click to collapse
can get to the bootloader (power+vol down) and get to fastboot USB then run fastboot getvar all and post the results or no
clsA said:
can get to the bootloader (power+vol down) and get to fastboot USB then run fastboot getvar all and post the results or no[/QUOTE
Do i run that command in ADB? If soo ADB is not working for me. Thanks in advance.
Click to expand...
Click to collapse
Debizzle said:
clsA said:
can get to the bootloader (power+vol down) and get to fastboot USB then run fastboot getvar all and post the results or no[/QUOTE
Do i run that command in ADB? If soo ADB is not working for me. Thanks in advance.
Click to expand...
Click to collapse
Ahh here it goes:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.07.1700.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT36SW912603
(bootloader) imei: 354439050673690
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4283mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
Click to expand...
Click to collapse
something is odd your version number is not the new version 3.58.1700.5
o and edit you post to remove the serialno nand imei
clsA said:
Debizzle said:
the commands run from a command prompt in a folder that contain adb and the fastboot.exe's do you have this folder ?
Click to expand...
Click to collapse
Yes I do have that folder and I also posted the results from the command prompt in recent comments.
Click to expand...
Click to collapse
Debizzle said:
clsA said:
Yes I do have that folder and I also posted the results from the command prompt in recent comments.
Click to expand...
Click to collapse
do you want to try a factory reset ? you could loose everything on the phone
Click to expand...
Click to collapse
clsA said:
Debizzle said:
do you want to try a factory reset ? you could loose everything on the phone
Click to expand...
Click to collapse
Thats fine, I called my self doing that through the bootloader and using twrp(wipe) but that doesnt work. So ill wait for you to tell me how.
Click to expand...
Click to collapse
Debizzle said:
clsA said:
Thats fine, I called my self doing that through the bootloader and using twrp(wipe) but that doesnt work. So ill wait for you to tell me how.
Click to expand...
Click to collapse
you have already tried the factory reset in the bootloader ?
I think the problem is taking the OTA with TWRP installed ..it's not good
Click to expand...
Click to collapse
clsA said:
Debizzle said:
you have already tried the factory reset in the bootloader ?
Click to expand...
Click to collapse
Yes, btw I dont have an os on the phone at least thats what twrp tells me. Perhaps because I wiped everything but the internal storage.
Click to expand...
Click to collapse
Debizzle said:
clsA said:
Yes, btw I dont have an os on the phone at least thats what twrp tells me. Perhaps because I wiped everything but the internal storage.
Click to expand...
Click to collapse
well you can try and sideload a rom back to the phone from twrp
do you need instructions for sideloading, by the way how did you get twrp back on the phone did it never leave or did you reflash it
do you have a rom or backup on the phone already ?
Click to expand...
Click to collapse
clsA said:
Debizzle said:
well you can try and sideload a rom back to the phone from twrp
do you need instructions for sideloading, by the way how did you get twrp back on the phone did it never leave or did you reflash it
Click to expand...
Click to collapse
Yes I will need those instruction if you dont mind. And the twrp never left. Btw how how are we going to sideload if ADB doesnt work?
Oh can you provided a link to a stock 4.3 google play edition rom that i can still recieve ota updates. Thanks so much for your help!!
Click to expand...
Click to collapse
Debizzle said:
clsA said:
Yes I will need those instruction if you dont mind. And the twrp never left. Btw how how are we going to sideload if ADB doesnt work?
Oh can you provided a link to a stock 4.3 google play edition rom that i can still recieve ota updates. Thanks so much for your help!!
Click to expand...
Click to collapse
adb will work in twrp just not in the bootloader
damn that won't work you need s-off... hold on
download that and I'll post the sideload steps
Set the device into ADB sideload mode. In TWRP you do this by going to Advanced then ADB Sideload.
From the command line, type adb sideload rom.zip
make sure the rom.zip is in the same folder as adb
it takes a few min to copy it over
Click to expand...
Click to collapse
conscious nripter
clsA said:
Debizzle said:
adb will work in twrp just not in the bootloader
Stock(non-rooted) 4.3 RUU Zip: http://d-h.st/8NQ
Mirror: https://mega.co.nz/#!vQgGDIrL!Y9nLRV...MHsPB0qwV7tcX8
MD5: 976ae068b29367025a30178f5eb4099d
download that and I'll post the sideload steps
Click to expand...
Click to collapse
Ok got that downloaded!! Question based on my reading it seems the OTA didnt work because of the S-on? What do you think? Like I said all I did was unlock my bootloader and tried to root last night and everything was good. Tried to get the 4.4 ota and explosion!! Lol
Click to expand...
Click to collapse
Debizzle said:
clsA said:
Ok got that downloaded!! Question based on my reading it seems the OTA didnt work because of the S-on? What do you think? Like I said all I did was unlock my bootloader and tried to root last night and everything was good. Tried to get the 4.4 ota and explosion!! Lol
Click to expand...
Click to collapse
yeah you had 2 problems s-on and custom recovery
here's the rom you need to sideload to your phone the other was a RUU that requires s-off sorry about that
http://forum.xda-developers.com/showthread.php?t=2353033
here's the stock recovery to go with your rom
https://www.dropbox.com/s/rns2nj5hn7lwjln/recovery.img
to flash it fastboot flash recovery recovery.img
Click to expand...
Click to collapse
clsA said:
Debizzle said:
yeah you had 2 problems s-on and custom recovery
here's the rom you need to sideload to your phone the other was a RUU that requires s-off sorry about that
http://forum.xda-developers.com/showthread.php?t=2353033
here's the stock recovery to go with your rom
https://www.dropbox.com/s/rns2nj5hn7lwjln/recovery.img
to flash it fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Ok cls Im getting cannot read sideload in the twrp. On the ADB sideload is saying "starting ADB sideload feature. Its like my computer is not connecting with my phone. It was connecting just fine before this stuff happen.
Click to expand...
Click to collapse
Hold the power button do 10-15 seconds and do a hard reboot and retry
Does adb devices show your phone when your in twrp?
Sent from my HTC One using Tapatalk 4
clsA said:
Hold the power button do 10-15 seconds and do a hard reboot and retry
Does adb devices show your phone when your in twrp?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Tried that but my phone is not showing. However does show in device manager as android usb device "my htc".
Ok
Let's try again tomorrow I'm exhausted
Sent from my HTC One using Tapatalk 4
clsA said:
Ok
Let's try again tomorrow I'm exhausted
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Ok man thanks for all your help it much appreciated!!
Related
So, i tried to do the WireTrick and it f-ed up my phone. i lost recovery + rom and can't flash anything cuz i'm on HBOOT 1.58 S-ON. (UNLOCK HTCdev).
I wanna relock it and run the Sprint RUU.exe but i'm getting the follow error;
_____________________________________________________
C:\rootevo3dnew>fastboot oem lock
...
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [PG_ERROR] htc_pg_hdr_get(114):
(bootloader) sd_read_sector error
(bootloader) [PG_ERROR] htc_pg_part_hdr_get(166):
(bootloader) htc_pg_hdr_get failed
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 134086008 (0x7FDFD78)
FAILED (status read failed (Too many links))
finished. total time: 1.014s
________________________________________________________
Is there any other way to get Lock/Relock?
MANY THX
Sorry I may be wrong and hopefully someone will correct me if I am because I cant remember for sure but since your unlocked, you could install recovery thru bootloader with PG86100.zip. Once you get recovery then you could at least get your phone will working again...
Sent from my Rooted S-OFF EVO 3D
Hit that thanks button if I helped.
scottypeterson said:
Sorry I may be wrong and hopefully someone will correct me if I am because I cant remember for sure but since your unlocked, you could install recovery thru bootloader with PG86100.zip. Once you get recovery then you could at least get your phone will working again...
Sent from my Rooted S-OFF EVO 3D
Hit that thanks button if I helped.
Click to expand...
Click to collapse
No, I can't cuz I still s-on...
Axhole said:
So, i tried to do the WireTrick and it f-ed up my phone. i lost recovery + rom and can't flash anything cuz i'm on HBOOT 1.58 S-ON. (UNLOCK HTCdev).
I wanna relock it and run the Sprint RUU.exe but i'm getting the follow error;
_____________________________________________________
C:\rootevo3dnew>fastboot oem lock
...
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [PG_ERROR] htc_pg_hdr_get(114):
(bootloader) sd_read_sector error
(bootloader) [PG_ERROR] htc_pg_part_hdr_get(166):
(bootloader) htc_pg_hdr_get failed
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = 134086008 (0x7FDFD78)
FAILED (status read failed (Too many links))
finished. total time: 1.014s
________________________________________________________
Is there any other way to get Lock/Relock?
MANY THX
Click to expand...
Click to collapse
Is there some reason you can't reinstall a recovery using adb? If you boot to bootloader, I would think you could flash your recovery image using adb commands. Then you should be able to reinstall your rom. I installed my recovery with s-on this way with no issues.
Barring that, I am not sure if the wire trick works on 1.58, I did it before I allowed my hboot to upgrade, but what happens if you try it again? Do you have anything to lose?
Just boot into bootloader, enter fastboot then in fastboot connect usb cable.
In PC you can flash downloaded recovery using "fastboot flash recovery recovery_name.img" command, just make sure that recovery image is in the same dir as fastboot.exe.
Guys, come on. I can't flash/boot recovery. that's the why i wanna relock it. when i try to boot an img, i get the msg "FAILED (remote: reproduce boot image with on-flash ramdisk error)", as far as i know it's cuz the ramdisk is empty. HELP PLEASE. lol.
Helppp!!!
Damn it! Nobody? Any one? I'm phoneless...
http://forum.xda-developers.com/showthread.php?t=1677053
read this thread. there is a command that will restore the backups in the folder with the exe file.
"(bootloader) Lock successfully..."
That line is there, more likely than not you're locked successfully. Run the RUU and see what happens
Axhole said:
Damn it! Nobody? Any one? I'm phoneless...
Click to expand...
Click to collapse
U can flash a zip ruu u just need to dl a signed ruu that u were currently on and run it then extract the zip from the .exe if ur on Windows search in the start menu %temp% delete everything and if it leaves some files that's fine then run the ruu .exe then look in the newest of the 2 folders it creates then find a file in the folder with another folder in it open that folder and find rom.zip move it to desktop and rename PG86IMG.zip place on sd and boot in bootloader and press vol + and u can try the wire trick again if u want
Sent from my PG86100 using xda premium
rockerdudelive said:
http://forum.xda-developers.com/showthread.php?t=1677053
read this thread. there is a command that will restore the backups in the folder with the exe file.
Click to expand...
Click to collapse
i tried that... no good ;-/
beneath-a-burning-turtle said:
"(bootloader) Lock successfully..."
That line is there, more likely than not you're locked successfully. Run the RUU and see what happens
Click to expand...
Click to collapse
NO my friend... it's like, "ok, you got it", then next line you have "NO WAIT, you can't get it" lol. STILL a big "UNLuCKy" ;0)
kickyoace said:
U can flash a zip ruu u just need to dl a signed ruu that u were currently on and run it then extract the zip from the .exe if ur on Windows search in the start menu %temp% delete everything and if it leaves some files that's fine then run the ruu .exe then look in the newest of the 2 folders it creates then find a file in the folder with another folder in it open that folder and find rom.zip move it to desktop and rename PG86IMG.zip place on sd and boot in bootloader and press vol + and u can try the wire trick again if u want
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
i did that and it just reboot with no changes... no errors. darn it!
Axhole said:
NO my friend... it's like, "ok, you got it", then next line you have "NO WAIT, you can't get it" lol. STILL a big "UNLuCKy" ;0)
Click to expand...
Click to collapse
Trust me, I think you got it. When I had a stroke of stupidity and relocked to take ota (which you should NEVER do), it gave me that EXACT line after it said locked successfully and I was locked just fine. Ran the ruu and was back to stock
Sent from my PG86100 using xda app-developers app
I went through similar issues but never got full update to New hboot I had to reunlock my phone flash stock rooted Rom then do wire trick but as previously stated I was still on 1.5 hboot and not sure if wire trick works on 1.58
Sent from my PG86100 using xda app-developers app
I just wanna said to y'all that I really appreciate all the help. I went to a sprint store and the technician told me that my cellphone has a "hardware failure". New cellphone, end of story. Thanks y'all.
I purchased a EVO 4G LTE for my sister a little while back and recently she had her boyfriend attempt to root it for her, and since I'm here it obviously didn't go over all too well. All he said he did was follow a video (which he gave me) on how to root for the newer software version. "Something happened and it didn't work so I watched another video and tried that" The phone is currently unlocked with S-ON and he flashed a working version of TWRP and cm10 couldn't figure it out and here we are. help please. Rooted using Linux. i did some reading and found out i had to flash the boot.img through fastboot. it just hangs at <waiting for device> in the terminal. Apologies if this has been answered, if so please point me in the right direction.
http://forum.xda-developers.com/showthread.php?t=1917106
Scroll down to see how to replace the files with the files from the cm10 rom that he flashed to the phone.
I forgot to mention I too am running linux, i tried to open this in wine and it wont save the files to my system. i will try this at a friends house asap and report back, thanks
BusstopBill44 said:
I forgot to mention I too am running linux, i tried to open this in wine and it wont save the files to my system. i will try this at a friends house asap and report back, thanks
Click to expand...
Click to collapse
Is adb configured right?
I use Linux and when I was son I was able to flash boot.img without problems
Sent from my EVO using xda app-developers app
jesuscash said:
Is adb configured right?
I use Linux and when I was son I was able to flash boot.img without problems
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
I'm not really sure what he did or why he even tried. How can I check adb to see if that was done correctly?
tilltheend714 said:
http://forum.xda-developers.com/showthread.php?t=1917106
Scroll down to see how to replace the files with the files from the cm10 rom that he flashed to the phone.
Click to expand...
Click to collapse
Alright, we have made some progress, I went to a buddys house and flashed the boot.img using said method flashed gapps as well.Now, i have no touch function but it does boot to the homescreen, any advice?
BusstopBill44 said:
Alright, we have made some progress, I went to a buddys house and flashed the boot.img using said method flashed gapps as well.Now, i have no touch function but it does boot to the homescreen, any advice?
Click to expand...
Click to collapse
I'm guessing it's on the latest firmware (3.16)? That update breaks the touch panel on all non-3.16 roms (which would include cm)...the only way to downgrade is to flash the tp.img from the previous firmware (3.15), which requires s-off. I would recommend going that route as it makes things a lot easier. For example, once you're s-off you won't have to fastboot flash kernels anymore. Check out the dirty racun thread in Original Development for more info. If you decide to s-off, you can flash the old tp.img zip from the 3.15 firmware to get the touch panel working for cm:
http://themikmik.com/showthread.php...dio-Collection&p=220556&viewfull=1#post220556
Otherwise, if you don't want to go s-off then you'll need to flash a sense Rom that's using the 3.16 base (which I think most if not all are now). I recommend Viper4g, runs great and has tons of tweaks like cm.
Sent from my EVO LTE
BusstopBill44 said:
Alright, we have made some progress, I went to a buddys house and flashed the boot.img using said method flashed gapps as well.Now, i have no touch function but it does boot to the homescreen, any advice?
Click to expand...
Click to collapse
Boot into bootloader and check the radio. If its 1.12.11.1210 then he took the 3.16 OTA and your only choices are what premo15 said.
premo15 said:
I'm guessing it's on the latest firmware (3.16)? That update breaks the touch panel on all non-3.16 roms (which would include cm)...the only way to downgrade is to flash the tp.img from the previous firmware (3.15), which requires s-off. I would recommend going that route as it makes things a lot easier. For example, once you're s-off you won't have to fastboot flash kernels anymore. Check out the dirty racun thread in Original Development for more info. If you decide to s-off, you can flash the old tp.img zip from the 3.15 firmware to get the touch panel working for cm: (Had to remove link)
Otherwise, if you don't want to go s-off then you'll need to flash a sense Rom that's using the 3.16 base (which I think most if not all are now). I recommend Viper4g, runs great and has tons of tweaks like cm.
Sent from my EVO LTE
Click to expand...
Click to collapse
Thanks, i decided to try and go S-OFF. I flashed the correct RUU for 3.16 and I get an error message after I flash the RUU,zip
/RabiesShot_LINUX$ sudo ./fastboot flash zip RUU.zip
< waiting for device >
sending 'zip' (659905 KB)...
OKAY [ 45.943s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
FAILED (remote: 43 main version check fail)
finished. total time: 122.961s
BusstopBill44 said:
Thanks, i decided to try and go S-OFF. I flashed the correct RUU for 3.16 and I get an error message after I flash the RUU,zip
/RabiesShot_LINUX$ sudo ./fastboot flash zip RUU.zip
< waiting for device >
sending 'zip' (659905 KB)...
OKAY [ 45.943s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
FAILED (remote: 43 main version check fail)
finished. total time: 122.961s
Click to expand...
Click to collapse
Did you run babyracun before relocking and running the ruu?
tilltheend714 said:
Did you run babyracun before relocking and running the ruu?
Click to expand...
Click to collapse
Wow, I completely looked past that, thought I read that whole page thoroughly. It looks like after I failed at that RUU it no longer has TWRP installed, I really hate asking but what can I possibly do now?
BusstopBill44 said:
Wow, I completely looked past that, thought I read that whole page thoroughly. It looks like after I failed at that RUU it no longer has TWRP installed, I really hate asking but what can I possibly do now?
Click to expand...
Click to collapse
re-flash twrp
bigdaddy619 said:
re-flash twrp
Click to expand...
Click to collapse
another error, $ sudo ./fastboot flash recovery openrecovery-twrp-2.4.2.0-jewel.img
sending 'recovery' (8032 KB)...
OKAY [ 1.277s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.107s
and tried it with 2.4.1.0, which i had before, as well.
BusstopBill44 said:
Wow, I completely looked past that, thought I read that whole page thoroughly. It looks like after I failed at that RUU it no longer has TWRP installed, I really hate asking but what can I possibly do now?
Click to expand...
Click to collapse
I don't know if you can just install TWRP again or if you'll have to go through the HTCdev unlock again. You'll need the Unlock_code.bin for the Dirtyracun process anyway so you might as well get it again.
tilltheend714 said:
I don't know if you can just install TWRP again or if you'll have to go through the HTCdev unlock again.
Click to expand...
Click to collapse
^^^^ true
I don't know if this will work since you've already tried dirtyracun; but I just used this method to achieve s off. It's ridiculously easy, and took me 5 minutes..
http://forum.xda-developers.com/showthread.php?t=2163013
tilltheend714 said:
I don't know if you can just install TWRP again or if you'll have to go through the HTCdev unlock again. You'll need the Unlock_code.bin for the Dirtyracun process anyway so you might as well get it again.
Click to expand...
Click to collapse
alright, some progress, got my unlock from HTCDEV got the unlock token, restarted the whole S-OFF process over,got through the ruu.zip. it installed, It rebooted itself instead of allowing me to "sudo ./fastboot reboot bootloader." It booted to a stock rom (which is now 3.15), I was in shock that I had her phone working again. restarted to bootloader, noticed it was locked and s-on went back to the directions and had me unlock through the unlock_token and finall had me run "sudo ./RabiesShot...which is giving me errors.
Starting up...
Testing connection...
Test 1: Rebooting into bootloader
Waiting fastboot (18/60)
Waiting...
Test 2: Booting device...
Waiting ADB... (60/60)
Test 2: Booting FAILED
Reboot device manually
Connection test failed!
After this error I rebooted into bootloader and im S-ON with unlocked. can i jump right into s-off'ing it
BusstopBill44 said:
alright, some progress, got my unlock from HTCDEV got the unlock token, restarted the whole S-OFF process over,got through the ruu.zip. it installed, It rebooted itself instead of allowing me to "sudo ./fastboot reboot bootloader." It booted to a stock rom (which is now 3.15), I was in shock that I had her phone working again. restarted to bootloader, noticed it was locked and s-on went back to the directions and had me unlock through the unlock_token and finall had me run "sudo ./RabiesShot...which is giving me errors.
Starting up...
Testing connection...
Test 1: Rebooting into bootloader
Waiting fastboot (18/60)
Waiting...
Test 2: Booting device...
Waiting ADB... (60/60)
Test 2: Booting FAILED
Reboot device manually
Connection test failed!
After this error I rebooted into bootloader and im S-ON with unlocked. can i jump right into s-off'ing it
Click to expand...
Click to collapse
Yeah, you should be able to run rabies shot again. Did you enable USB Debugging befor trying to run rabies shot? And are you running linux 32-bit?
tilltheend714 said:
Yeah, you should be able to run rabies shot again. Did you enable USB Debugging befor trying to run rabies shot? And are you running linux 32-bit?
Click to expand...
Click to collapse
thanks, and after all that s-off/on nonsense I cant s-off with a 32 gb microsd....grrrr
BusstopBill44 said:
thanks, and after all that s-off/on nonsense I cant s-off with a 32 gb microsd....grrrr
Click to expand...
Click to collapse
You can try this
http://forum.xda-developers.com/showthread.php?t=2163013
But that requires root. You don't have a 2gb card laying around anywhere?
Becool0130 said:
Stock Nandroid for T-Mobile USA:
https://mega.co.nz/#!gpIFGR7L!c5o74Ex6k3wkVlWKWgSrJBrguShtjHXeB6YQPmoqAmM
Click to expand...
Click to collapse
Made this easier for people to find. Send thanks to Becool0130. http://forum.xda-developers.com/showpost.php?p=40745177&postcount=55
To get rid of the write protection on /system, boot up after restore then flash a custom kernel.
For those of you who hate Superuser like me, here is a zip that replaces Superuser with SuperSU.
That would be me the OP says to give thanks to
Here's the direct link to the nandroid download:
Stock Nandroid for T-Mobile USA (TWP Rooted) :
https://mega.co.nz/#!gpIFGR7L!c5o74Ex6k3wkVlWKWgSrJBrguShtjHXeB6YQPmoqAmM
Sent from my HTC One using xda premium
I don't need it but there have been many users inquiring about it. Thanks for the good work!
Sent from my HTC One using Tapatalk 2
AdVanceYourself said:
I don't need it but there have been many users inquiring about it. Thanks for the good work!
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Mega keeps freezing up on me, it gets to like 75% and the page freezes, I tried with ie and chrome, same problem. Can the op or someone else please upload to uploaded?
veliksam said:
Mega keeps freezing up on me, it gets to like 75% and the page freezes, I tried with ie and chrome, same problem. Can the op or someone else please upload to uploaded?
Click to expand...
Click to collapse
Restart your pc and try again please. Actually you can download this directly to your phone too
Sorry to say but this works for everyone else just fine so it's hard to troubleshoot.
Sent from my HTC One using xda premium
Thanks, I'll try again after a restart.
Update: Managed to download it with chrome (didn't restart).
Btw, can anyone tell me how to extract the kernel and make it a zip for flashing via cwm? Also what name is the kernel file? Reason I need this is because I flashed a non stock kernel and incase I want to go back to the stock I want to have it. I haven't seen a stock tmo kernel yet. Thanks
Sent from my HTC One using Tapatalk 2
veliksam said:
Thanks, I'll try again after a restart.
Update: Managed to download it with chrome (didn't restart).
Btw, can anyone tell me how to extract the kernel and make it a zip for flashing via cwm? Also what name is the kernel file? Reason I need this is because I flashed a non stock kernel and incase I want to go back to the stock I want to have it. I haven't seen a stock tmo kernel yet. Thanks
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Ill be the first to admit I don't have a clue. Took me ages to figure out how to do a nandroid
veliksam said:
Thanks, I'll try again after a restart.
Update: Managed to download it with chrome (didn't restart).
Btw, can anyone tell me how to extract the kernel and make it a zip for flashing via cwm? Also what name is the kernel file? Reason I need this is because I flashed a non stock kernel and incase I want to go back to the stock I want to have it. I haven't seen a stock tmo kernel yet. Thanks
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Boot.img. You can use Titanium backup or Nandroid Manager to extract it.
cant boot into recovery with this nandroid
Hey everyone, I had a nandroid but didnt backup my recovery on my tmobile HTC one so I downloaded this nandroid and flashed the recovery from it but for some reason I cant boot into recovery, when i press power + volume down it goes into fastboot says tampered relocked and security warning but when i choose bootloader then recovery it just shows the htc logo screen then goes back to the hboot screen. Can anyone help me figure out what is going on?
It works, restored via CWM. Factory reset through settings doesn't work though, probably because it isn't stock recovery. Although, I recommend making a new image OP, your gmail is attached to it still .
Does anyone have the stock tmobile recovery image?
Edit: Found in the dev section under the Dump thread, sorry missed that there was a recovery.img there.
air2k57 said:
It works, restored via CWM. Factory reset through settings doesn't work though, probably because it isn't stock recovery. Although, I recommend making a new image OP, your gmail is attached to it still .
Click to expand...
Click to collapse
I have the oddest luck with restoring this same nandroid I made!! LOL -_-
I've tried to with TWP recovery. Rebooted and tried but it doesnt flash. It takes me back to the same screen really.
I've downloaded CWM recovery and having probs recognizing it there. Wont recognize my TWP backups.
Any step by step instructions? Yea.. the irony in that right?
formula84 said:
Does anyone have the stock tmobile recovery image?
Edit: Found in the dev section under the Dump thread, sorry missed that there was a recovery.img there.
Click to expand...
Click to collapse
I'm not sure if he changed out the recovery in the op or not, so if it doesn't work for u send me a PM and I'll give u a link to the proper tmo recovery.
Team-Noctural.com/androidtechy.com/droidnow.com.
Not working
Becool0130 said:
That would be me the OP says to give thanks to
Here's the direct link to the nandroid download:
Stock Nandroid for T-Mobile USA (TWP Rooted) :
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Could you please reload or fix the link? I clicked on your link and it kept saying that the file was unavailable. Thanks for your hard work!
Becool0130 said:
I have the oddest luck with restoring this same nandroid I made!! LOL -_-
I've tried to with TWP recovery. Rebooted and tried but it doesnt flash. It takes me back to the same screen really.
I've downloaded CWM recovery and having probs recognizing it there. Wont recognize my TWP backups.
Any step by step instructions? Yea.. the irony in that right?
Click to expand...
Click to collapse
Hmm, I have no luck seeing that backup in TWRP, but CWM sees it fine. Just have to make sure you have it in the right directory. Make a backup of your current Rom and it is going to create a directory for you, if you delete the old one . Then, throw your backup in there, following same naming scheme .
Sorry it took so long to reply!
SmiLey497 said:
Made this easier for people to find. Send thanks to Becool0130. http://forum.xda-developers.com/showpost.php?p=40745177&postcount=55
To get rid of the write protection on /system, boot up after restore then flash a custom kernel.
For those of you who hate Superuser like me, here is a zip that replaces Superuser with SuperSU.
Click to expand...
Click to collapse
It works! Thank you so much.
thanks for the good work！！
Does anyone have a mirror? Link is dead now.
Nevermind. Got it from mugetsu
Becool0130 said:
That would be me the OP says to give thanks to
Here's the direct link to the nandroid download:
Stock Nandroid for T-Mobile USA (TWP Rooted) :
https://mega.co.nz/#!gpIFGR7L!c5o74Ex6k3wkVlWKWgSrJBrguShtjHXeB6YQPmoqAmM
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Question - I have been trying to go back to Stock to see if I can get 4G again (i am stuck on Edge ever since I rooted and put AOKP 4.1.2 ROM on - currently on)... given my phone info below, can someone tell me if I should be OK with flashing this tmobile stock zip ????? Please help..
I have HTC ONE S - Tmobile U.S - Tampered / Unlocked.
HBOOT 1.13
version: 0.5
version-bootloader: 1.13.0000
version-baseband: 1.13.50.05.31
version-cpld: None
version-microp: None
version-main:
serialno: *******
imei: *******
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: HTC__001
battery-status: good
battery-voltage: 3894mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d92cc658
hbootpreupdate: 11
gencheckpt: 0
DroidLuvver said:
Question - I have been trying to go back to Stock to see if I can get 4G again (i am stuck on Edge ever since I rooted and put AOKP 4.1.2 ROM on - currently on)... given my phone info below, can someone tell me if I should be OK with flashing this tmobile stock zip ????? Please help..
I have HTC ONE S - Tmobile U.S - Tampered / Unlocked.
HBOOT 1.13
version: 0.5
version-bootloader: 1.13.0000
version-baseband: 1.13.50.05.31
version-cpld: None
version-microp: None
version-main:
serialno: *******
imei: *******
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: HTC__001
battery-status: good
battery-voltage: 3894mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d92cc658
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Have u tried just flashing the latest tmo radio and why is ur hboot 1.13 and ur Cid HTC_001? Those alone tell me that u r not using a T-Mobile HTC One.
androidtechy.com/Team-nocturnal/droidnow.com
http://forum.xda-developers.com/showthread.php?p=43332271
T- Mobile 1.27.531.8 and 1.27.531.11 stock and rooted roms
hi lol guys
i have htc amaze x715e inst
i need custom rom like viper rom
rom
nokia alkng said:
hi lol guys
i have htc amaze x715e inst
i need custom rom like viper rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2167596
pbergonzi said:
http://forum.xda-developers.com/showthread.php?t=2167596
Click to expand...
Click to collapse
dear sir
s -off not slove with me
no prob
after flash viper rom
wifi not work
please help
viper?
nokia alkng said:
dear sir
s -off not slove with me
no prob
after flash viper rom
wifi not work
please help
Click to expand...
Click to collapse
What is "not slove?"
Which viper rom did you flash?
What happens with wifi?
pbergonzi said:
What is "not slove?"
Which viper rom did you flash?
What happens with wifi?
Click to expand...
Click to collapse
i use this [ROM] Viper Amaze 2.0.2 [Aroma][ Android 4.0.4 | ICS | Sense 4.1][4/15/2014]
but wifi not working
wifi not working
nokia alkng said:
i use this [ROM] Viper Amaze 2.0.2 [Aroma][ Android 4.0.4 | ICS | Sense 4.1][4/15/2014]
but wifi not working
Click to expand...
Click to collapse
Do proper wipe (data/factory reset and "format all partitions except sdcard") to re-flash rom and then re-flash. After launch again, check wifi settings to see if there are available networks.
You already upgraded phone to ICS I think, or rom wouldn't have flashed.
pbergonzi said:
Do proper wipe (data/factory reset and "format all partitions except sdcard") to re-flash rom and then re-flash. After launch again, check wifi settings to see if there are available networks.
You already upgraded phone to ICS I think, or rom wouldn't have flashed.
Click to expand...
Click to collapse
mmmmmmm
in fact befor install wip data and no available wifi networks
pbergonzi said:
Do proper wipe (data/factory reset and "format all partitions except sdcard") to re-flash rom and then re-flash. After launch again, check wifi settings to see if there are available networks.
You already upgraded phone to ICS I think, or rom wouldn't have flashed.
Click to expand...
Click to collapse
could u gave me correct rom
pbergonzi said:
Do proper wipe (data/factory reset and "format all partitions except sdcard") to re-flash rom and then re-flash. After launch again, check wifi settings to see if there are available networks.
You already upgraded phone to ICS I think, or rom wouldn't have flashed.
Click to expand...
Click to collapse
after flash viper rom
wifi error
wifi error
nokia alkng said:
after flash viper rom
wifi error
Click to expand...
Click to collapse
Go in your About Phone and give the kernel and Android Version and software, etc.
Did you upgrade the phone from GB to ICS?
pbergonzi said:
Go in your About Phone and give the kernel and Android Version and software, etc.
Did you upgrade the phone from GB to ICS?
Click to expand...
Click to collapse
good day bro
thanx
is these enugh
C:\android>cd c:\Android
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.92.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: SH289VF00271
(bootloader) imei: 357265045299516
(bootloader) product: ruby
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PH8510000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3747mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b411d064
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.502s
C:\android>fastboot oem readcid
...
(bootloader) cid: HTC__044
OKAY [ 0.006s]
finished. total time: 0.008s
C:\android>
please help thanx
phone
nokia alkng said:
good day bro
thanx
is these enugh
please help thanx
Click to expand...
Click to collapse
Can you still launch android into any rom at all?
pbergonzi said:
Can you still launch android into any rom at all?
Click to expand...
Click to collapse
yap viper rom
but now make auto fast restart
pbergonzi said:
Can you still launch android into any rom at all?
Click to expand...
Click to collapse
I think I bricked my phone...
now make auto restart
rom for you
nokia alkng said:
yap viper rom
but now make auto fast restart
Click to expand...
Click to collapse
If it bootloops, it's not bricked--brick does nothing at all, not even bootloop.
Go into recovery, perform "wipe data/factory reset" and "format all partitions except scared." Download this rom and copy to sdcard, then flash this rom the same way you flashed the viper rom:
http://d-h.st/His
Let me know what happens.
pbergonzi said:
If it bootloops, it's not bricked--brick does nothing at all, not even bootloop.
Go into recovery, perform "wipe data/factory reset" and "format all partitions except scared." Download this rom and copy to sdcard, then flash this rom the same way you flashed the viper rom:
http://d-h.st/His
Let me know what happens.
Click to expand...
Click to collapse
oky
this rom ruu.exe u mean flash it using twrp recovery ??
and after that flash viper rom
exe
nokia alkng said:
oky
this rom ruu.exe u mean flash it using twrp recovery ??
and after that flash viper rom
Click to expand...
Click to collapse
Just run the exe on your windows computer and see if asks you to connect the phone or if you have to connect the phone first with adb or whatever it asks. Just run the exe and see what happens. Search the forum for more information on it--I don't have time right now. DON'T flash viper after using this--just use this to get your phone stable and then see if you want to do something else with the phone, but FIRST at least get the phone stable. Maybe you will want to keep it that way and not flash anything until you become more familiar the process by reading the threads. The important thing right now is to get your phone back to stable working phone, NOT experimentation.
pbergonzi said:
Just run the exe on your windows computer and see if asks you to connect the phone or if you have to connect the phone first with adb or whatever it asks. Just run the exe and see what happens. Search the forum for more information on it--I don't have time right now. DON'T flash viper after using this--just use this to get your phone stable and then see if you want to do something else with the phone, but FIRST at least get the phone stable. Maybe you will want to keep it that way and not flash anything until you become more familiar the process by reading the threads. The important thing right now is to get your phone back to stable working phone, NOT experimentation.
Click to expand...
Click to collapse
again aloot thanx
in fact i need arabic rom
next
is this rom ruu.exe correct with s-on phone ??
pbergonzi said:
Just run the exe on your windows computer and see if asks you to connect the phone or if you have to connect the phone first with adb or whatever it asks. Just run the exe and see what happens. Search the forum for more information on it--I don't have time right now. DON'T flash viper after using this--just use this to get your phone stable and then see if you want to do something else with the phone, but FIRST at least get the phone stable. Maybe you will want to keep it that way and not flash anything until you become more familiar the process by reading the threads. The important thing right now is to get your phone back to stable working phone, NOT experimentation.
Click to expand...
Click to collapse
ERROR (156): IMAGE ERROR :crying::crying::crying::crying:
nokia alkng said:
again aloot thanx
in fact i need arabic rom
next
is this rom ruu.exe correct with s-on phone ??
Click to expand...
Click to collapse
are you there
Ok, so every time i try to root my htc one m9 it says that it needs bl_unlock, but when i try to unlock the bootloader, it says it needs s-off, so i need some help with figuring this out!
This is the error i get every time i try to get the identifier token from my device in ruu mode,
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.013s]
finished. total time: 0.014s
Can someone please help me?!
Go to developer options in settings and select OEM unlocking.
did you get it to root?
ZeRo2o9 said:
did you get it to root?
Click to expand...
Click to collapse
Not yet! I am still trying other things out...
rogsoccerman said:
Go to developer options in settings and select OEM unlocking.
Click to expand...
Click to collapse
franksaaron57 said:
Not yet! I am still trying other things out...
Click to expand...
Click to collapse
did you try doing this? that SHOULD be the problem from what ive read in the forum, once you unlock you can just flash twrp and supersu zip
ZeRo2o9 said:
did you try doing this? that SHOULD be the problem from what ive read in the forum, once you unlock you can just flash twrp and supersu zip
Click to expand...
Click to collapse
But i cant do that, thats the problem! I dont see ANY option for oem unlock!
Only way to unlock bootloader is from the htc website and it will have all your tools to unlock it on the top right corner on the website. IF your on windows type adb devices adb root
OK. I will try to get it to work. Thanks for your input!
franksaaron57 said:
OK. I will try to get it to work. Thanks for your input!
Click to expand...
Click to collapse
This is how i unlocked my bootloader this should solve your problem to root it is very simple if you still need help pm
https://www.youtube.com/watch?v=rOHN8byHAzk
Thanks so much!