Discussion and Q&A thread: http://forum.xda-developers.com/optimus-l9/general/discussion-cyanogenmod-11-t2845759
Hi. I built CyanogenMod 11 for LG P760/P765. It is stable for use, but there are some small bugs.
What’s working: Almost all!
What’s not working/has bugs:
Tell me!
Kernel and rom features:
Compiled with SaberMod 4.8 toolchain with @JustArchi opt flags
Ramhack 819Mb
Better battery life
OC to 1350 Mhz
GPU OC to 384 Mhz
Many tweaks
Sound boost on headphones
Updated screen driver
Wifi Direct
F2FS filesystem used by default
GPS fixed (use app included in rom)
Power saving mode (automatically enabled when needed)
Black and white interface more kitkat (not blue and black like cm)
Internal sd disabled
Added BLN support (L9 BacklightMod app)
Support for 5Ghz wifi
OTA updates
Support for f2fs, ExFat and NTFS filesystem
Bluetooth Low Energy support
Less battery drain by screen (lower screen refresh rate)
Better multicore managing
What you need:
LG P760/P765
Unlocked bootloader
My TWRP (only my supports f2fs), you can download it here.
Flashing:
Flash my recovery
Boot to TWRP
Go to settings
Check “Force data and cache wipe functions to use f2fs” and “Include system partition”
Go to main menu and click wipe. Check data and cache and confirm
Flash ROM
Flash fix (if any)
Flash Gapps (if you want)
Reboot system now!
ROM WORKS ONLY WITH RECOVERY HERE!!!
DO FULL WIPE, EVEN IF YOU WERE USING CM11 BEFORE, BECAUSE NEW VERSION USES NEW FILESYSTEM. YOU NEED TO WIPE TO CHANGE FILESYSTEM TO F2FS. CHECK INSTALLATION SECTION. ROM SUPPORT LATEST BASEBANDS CORRECTLY (DEPENDS OF VARIANT).
Download: http://artas182x.you2.pl/?page_id=287
Thanks to:
ViPER520,zhuhang (Viper4Android)
dhiru1602 (Fixing bugs with 1080p recording, bluetooth low energy support)
JustArchi (Compiler flags)
What to do if your GPS doesn’t work:
Make sure you are using mobile network connection (not WIFI)
Go to GPS Fixer app
Click delete all gps data/configs
Go to Download LTO nad click Download LTO
Go back to main menu
Click restart GPS module
That’s all
About sound boost
Use trickstermod app to control soundboost
About OTA updates
Now next rom versions can be updated through updater in Settings->About phone->Cyanogenmod Updates. Updater app is written by https://www.otaupdatecenter.pro/?page=credits.
Changelog:
27-10-2014
Fixed kernel panics (reverted frequency table)
Updated SaberMod Toolchain
Synced with latest sources from cm-11.0/stable branch
————————
26-10-2014
Better multicore handling (Intelliplug, Intellidemand governor)
Better performance and battery life
Removed performance profiles (now Intellidemand detects if you need more performance or battery life). Overclocking can be handled by ex. Trickster mod
Next try to fix Miracast (please try to use it in display settings)
Better memory and multitasking tweaks
Fixed OTA Updater (this ROM must be updated manually)
Optimized screen timings
————————
11-10-2014
Optimized power profiles (power saving and balanced uses hotplug governor)
ROM is synced with latest CyanogenMod 11 stable sources
Fixed ADB problem on Windows
Screen now uses less power (lower screen refresh rate)
————————
13-09-2014
Fixed deep sleep problems when using Bluetooth (thank you dhiru1602)
Compiled with new version of SaberMod Toolchain
Synced with CM sources
Fixed and updated OTA Updater
Fix bug in CM code that Miracast option would stay in Settings even when it was disabled
————————
12-09-2014
Remove Miracast - it wasn't working
Include latest GPS Fixer app (GPS is very fast now)
Powersave and Balanced power profile is optimized
Sync with CM sources
————————
18-08-2014
Fix bluetooth
Fix bug: L9 can't go to deepsleep when bluetooth is enabled
Replaced DSP Manager with Viper4Android installer
Sync with latest cm code
————————
12-08-2014
Lower ramhack - no more camera problems
Try to fix dead sleeps. Beta testers reported to be good now
Sync with the latest cm code
Introduce CM performance profiles instead l9tweaker
Better battery life (4h 30 min screen turned on)
Sound boost now optional - use trickster mod
————————
24-07-2014
Completly rebased everything
Compiled with SaberMod 4.8 toolchain with JustArchi opt flags
1080p recording working
Longer battery life
Added my own apps (L9Tweaker, GPS Fixer, L9 BacklightMod, L9 UMS Switcher)
Fixed wifi direct, 5Ghz support and Miracast (untested)
Sound boost other way
Added battery saving option in kernel and app in Performance settings
OTA updater support
New drivers for SGX, camera, gps and wifi
Push volume up at boot to boot to fastboo feature
Updated to android 4.4.4 – lastest cm code
Support for f2fs, exfat and ntfs filesystem
New tweaks for better performance
More stable code
Fixex for Bluetooth
Undervolt by smartreflex module (now our uv isn’t recalibrated, because we are changing voltage after calibration)
————————
Fix: Removed smartreflex, changed voltages – no kernel panic
18-04-14
Removed trickster mod. Added my own app “Kernel settings”. Ability to disable 2nd core.
Updated screen driver, ability to change colors between amoled mode and nature mode
Many fixes to kernel, new cpu freq steps
Less battery drain
Fixes to ril (need to test)
Some gps fixes
Frandom enabled by default
Removed wifi direct
Some audio fixes
More backports in kernel
Added other tweaks
Many other fixes. I can’t remember everything
On bootup and/or when changing screen colors in my app screen goes blank. You need only to lock device and unlock it again.
————————
28-02-14
New kernel (more stable)
GPU OC reduced to 384 Mhz and CPU OC to 1350 Mhz
Asynchronous fsync from HTC One and many other tweaks in kernel
Added wifi display for tests (propably not working)
Ril files from lastest stock rom (fixed issues with 3g signal)
Ramhack reduced to 840 Mb for stability
New governors (i reccomend dyninteractive)
Sync with CM source tree + own patches
More stability, better battery life, less lags
Added frandom – more performance – how to enable(script or terminal): http://pastebin.com/Xm76MBaL
————————
7-01-14
Some bluetooth fixes (need to test)
Updated cm source
Some sdcard mounting issues fixes
UMS now works. You must select ums and then reboot with disabled debugging
Update before next big version
Updated wifi configs
Fix: moving to sd and app data on sd fixed
————————
Fixed screenshot preview
Disabled internal sd
New kernel (see kernel features)
OC interface (apk)
Black and white ui (not blue like Jelly Bean)
Synced with cm repos (Android 4.4.2)
XDA:DevDB Information
CyanogenMod 11 for LG Optimus L9, ROM for the LG Optimus L9 P760, P765, P768
Contributors
artas182x
Source Code: http://github.com/artas182x
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Latest TWRP by artas182x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 27102014
Stable Release Date: 2014-10-27
Created 2014-08-12
Last Updated 2016-12-16
Wow ! amazing !
Does GPS work? Only two bugs in initial release ? Just awesome
Wow! *-* as Doominq said it's just amazing! thanks
Gesendet von meinem LG-P760 mit Tapatalk
Dear Artas! Enabled or disabled SD emulation in your ROM? A very big thank you, for you!
Sent from my LG-P760 using Tapatalk
---------- Post added at 09:49 PM ---------- Previous post was at 09:45 PM ----------
Why with your recovery only?
Sent from my LG-P760 using Tapatalk
Becouse CM11 needs CWM 6.0.4.x I think...
JulianJenner said:
Dear Artas! Enabled or disabled SD emulation in your ROM? A very big thank you, for you!
Sent from my LG-P760 using Tapatalk
---------- Post added at 09:49 PM ---------- Previous post was at 09:45 PM ----------
Why with your recovery only?
Sent from my LG-P760 using Tapatalk
Click to expand...
Click to collapse
Both storages work, because i had problem with mounting single.
Wysłane z mojego LG-P760 przy użyciu Tapatalka
Works very well, very smooth.
But, the panorama doesn't work - i have black scree and GPS doesn't work.
How to flash new recovery?
I haven't PC at the moment...
No way for me?
Sent from my LG-P760 using Tapatalk
JulianJenner said:
How to flash new recovery?
I haven't PC at the moment...
No way for me?
Sent from my LG-P760 using Tapatalk
Click to expand...
Click to collapse
Use flashify from playstore,very handy tool
Flashed, still setting it up. It looks very nice, no hiccups as of now. Can't find the option to slide-adjust brightness, maybe it's missing.
Cant wait to test ART and get rid of dalvik finally
It's just rebooted after this setting, but it takes a while to rebuild cache. I wonder if it's fully operational, thought CM didn't merge this one.
Anyhow - huge thanks for a new toy to meddle with, will report back with GPS, battery and such.
n0p3zz said:
Use flashify from playstore,very handy tool
Click to expand...
Click to collapse
Thanks n0p3zz! I never use this program before. Works correctly now. I flash 4.4 quickly. Test it. Thank you everybody!
Sent by my Galaxy Tab 10.1 with XDA Premium 4 from deadly Hungary
No problemo @JulianJenner
This rom just flies Phone is so fast,faster than on 4.2 or 4.3
Thanks for rom Artas
how to get camera working on p768?
In Germany we have a Word for such a great Work: GEIL! :good:
Apart from GPS I don't have any problems at all, it's great. I would also like to see sliding brightness control, but I know it's dependant on sources. Also some toggles aren't available.
Sent from my LG-P760 using xda app-developers app
Daycrawler said:
Apart from GPS I don't have any problems at all, it's great. I would also like to see sliding brightness control, but I know it's dependant on sources. Also some toggles aren't available.
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
If you mean quick toggles,you can change them in settings->interface->quick settings panel
And you can adjust brightness in display settings
Sent from my LG-P760 using xda app-developers app
Seems like someone was faster than me beenwirking on it too, but I ran into some build errors. Maybe I can get them fixed now and also solve some of your bugs let's see how far we can get with our kernel... Seems like a lot of bugs will remain, as we dont have a 3.4 kernel. But glad that we have a new toy
Sent from my LG-P760 using xda app-developers app
When we finally managed to fix gps issue in 4.3 roms we run into it again. Come on Artas, I believe in you, great work man.
jufece said:
how to get camera working on p768?
Click to expand...
Click to collapse
As I get by the LG logo?
We install and stays in LG logo
PreemPalver said:
When we finally managed to fix gps issue in 4.3 roms we run into it again. Come on Artas, I believe in you, great work man.
Click to expand...
Click to collapse
GPS is working for me. It seems so.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But wifi falter (net::ERR_TIMED_OUT), Who knows? Maybe network of my workplace gonna mess... Home at night, it seemed the wifi works. I'm testing on. I'll write what I experience. JJ
EDIT: I mean, sure the work wifi is not working correctly. Where's signal, where there is no signal.
Send with my imprisoned LG-P760 by Tapatalk Pro from the dying and suffering Hungary...
Related
First,a huge thanks to Gokhan Moral for giving me permission to use his initramfs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(current version SpeedWizz kernel ICS 4.2 stable)
WARNING: FROM THE LATEST VERSION 4.1 BETA2 IT SHOULD WORK WITH MORE PLATFORM, PLEASE READ CHANGELOGS IN SECOND POST FOR DETAILS
Compiled with Linaro toolchain 4.7 (08-2012)
Samsung opensource based update7
Dual boot (and still only between samsung rom) by gokhan moral
Linux version 3.0.40
rooted with supersu (chainfire), if the rom is already rooted kernel will not overwrite your application Superuser
Busybox 1.20.2 cm full
SpeedMod patch K3-31 (partially used)
NO BUG MMC_CAP_ERASE - it's safe to perform all wipe operations from recovery
Tunderbolt Tweaks
Automatic backup of your EFS partition
stable
All logs off for greater rapidity
Undervolting (use Voltage control or similar)
overclocking
Step frequency 100-1400 MHz
Default 200-1200 MHz
BLN - the kernel will automatically install the appropriate libraries
CWM manager apk
Voodoo louder support
DVFS disabled
Available governors: ondemand, pegasusq (default), lionheart, interactive, smartass, conservstive, performance, powersave, userspace
init.d support: fixed bug DVFS script on boot
I / O schedulers: CFQ (default), noop, Deadline
governor pegasusq optimized for dual core (by gokhanmoral)
ondemand governor tweaks (by hardcore)
bootanimation support (system / media or data / local)
touch recovery based on CWM 6.0.1.2 of Siyah (by gokhanmoral)
touch sensivity fix
recovery fstab fix
lowers the voltage of some devices to improve battery life (AMOLED screen, touch panel, gpu)
insecure kernel
ZRAM and SWAP support
Click to expand...
Click to collapse
ZRAM USAGE:
As stated in changelogs since the 4.2 stable version this driver is activated by default. To see how it's running you can use adb or terminal emulator: type
Code:
free
and you'll see swap paging.
To deactivate at next boot: you need a root explorer (i suggest ES File manager, free on playstore) and create a new file called ".noswap" in system folder, reboot and zram will not longer work. To reactivate delete the file above and reboot again.
Click to expand...
Click to collapse
Speedwizz kernel Source code on GitHUB
Click to expand...
Click to collapse
Speedwizz KERNEL ICS 4.2 stable
Note: Users of SpeedWizz II (if anyone left ) can use the app to download the OTA content.
Click to expand...
Click to collapse
The kernel can be installed from recovery CWM or by using Odin.
If you download the zip version of CWM reboot into recovery and select install zip from sd card. Reboot and enjoy!
If you download the Tar archive, reboot your device in download mode. Start Odin as administrator (if you use Winblows 7 or Vista) and select PDA. Choose the tar archive and connect the device. Click on start and wait the magic, then remove the cable when the device restarts. Now you can enjoy ..
Click to expand...
Click to collapse
I am not responsible for damage caused by flash the kernel or to damage caused by YOUR negligence in performing editing operations of the terminal.
This kernel, although based on the samsung official sources, it is not an official binary and as such will be recognized by bootloader: that means by installing it you have lost your warranty.
We are adults and vaccinated and are conscious of what we do, if you're not or you have any doubt, DO NOT flashate do this nor any other kernel.
Click to expand...
Click to collapse
- Gokhanmoral
- Hardcore
- myfluxxy
- Tungstwenty
- Phil3750
- DarhamManiar (bln)
- Simone201
- Sakuamilk (github)
- Fenomeno83
- Malo2000
- Jacocaj
- Mondman
- Enigmisth
- XDA
- Androidiani
Click to expand...
Click to collapse
That is the history of speedwizz kernel, as well as to help out because reading a changelog is always good thing, in this case serves as a reminder to me ...
I started with a good base kernel (SpeedMod for the hardcore) but virtually stripped of all the features we are used to, even the most simple (eg bootanimation) .
I can guarantee that for a noob like me has been (and will continue to be) a tough battle ....... Huge thanks to all the developers, i am learning so much from you.
Changelog Latest version 4.2 stable build
(from version 4.1 beta2)
- New configuration file: speedwizz_defconfig
totally abandoned def_config derived from SpeedMod, the kernel continues on its path already since several versions before this
- Updated the cross-compiler to Linaro Toolchain 4.7 (08-2012)
The result is a general optimization of the code which results in less consumption of resources and greater stability.
Seeing is believing.
- This build fixes several compilation warnings and for several I mean about thirty
the warning message is a message from the compiler, it is not a fatal error (in fact, the compilation went fine) and if it's about an uninitialized function can sometimes affect the stability of a program (the kernel is a set of programs written mostly in C language) .
Most of the warnings that have at compile time are caused by variables or functions not used.
Obviously, the biggest advantage in NOT have this kind of warnings is that less code "dead" is inside a kernel than fewer resources will use the kernel to perform their tasks and the kernel will be more powerful in terms of fluidity and stability.
In any case i will consider a warning as a bug (generally speaking) even if minor, or even if it is not perceptible by the user.
- Added NSTools
You can use this app to configure all the parameters that are managed by the user, OC, UV, BLN, startup scripts, etc. ..
- Improved support to init.d
Now you will create a special folder init.d if it is not present in the rom (as in the case of the stock rom), if it exists this will not be touched and will be activated only support to run parts.
- Cleaned up some scripts in the initramfs
many things were unnecessary and linked to the use of extweaks (since the initramfs kernel are derived from Siyah kernel), which as you know is not supported by the kernel
- Added support to form Zram and Swaps
Enabled by default but can be disabled by the user through simple instructions.
The use of zram is to use a portion of RAM allocated compressed in a single device, in the specific case of this kernel with a capacity of 300mb and allocated in the ram itself, with a compression ratio of about 50%, for a total of about a gig of ram total between real and tablet.
The main advantage consists in maintaining applications in cache (non-active) for a period longer than normal, with a consequent advantage in the experience multitasking.
Click to expand...
Click to collapse
Changelog Latest version 4.1 beta2
(from version 4.0)
- Improved support for the following categories of Rom (this list includes only those in which the kernel has been tested for a long time, I suggest you proceed with caution, however, since it is a beta version)
1. ICS 4.0.4 Samsung
2. ICS 4.0.4 AOSP (CyanogenMod 9 - AOKP)
3. ICS 4.0.4 MIUI
4. JellyBean 4.1.1
All credits for this to Gokhanmoral, without his initramfs this was not possible!
- Fixed the autorotation bug on AOSP roms
- Modified (and fixed) the install script that caused trouble (severe) at boot: the ROM AOSP did not install the root of it (fortunately do not need it), it cwm manager.apk and even libraries for the BLN
- Fixed the driver cypress-touchkey.c for the proper functioning key illumination touch with AOSP rom and its function BLN.
- Fixed some warnings from the cross compiler
Click to expand...
Click to collapse
Changelog SpeedWizz Kernel ICS version 4.0
(from version 3.2)
- Dual Boot (by gokhanmoral) but only using samsung rom 4.0.4
- More frequency steps now 100-200-500-800-1000-1200-1300-1400 mhz
- Default frequency 200 (min) - 1200 (max)
- Added BLN support
- New initramfs (from siyah 4.1.5)
- Touch recovery from Siyah 6.0.1.2 (by gokhanmoral)
- Tunderbolts scirpt tweaks (credits for the script to the autor, but the way i used is from siyah initramfs)
- Fixed some compiler warnings
- Updated busybox (1.20.2 cm version)
- Added CWM manager apk (fixed some incompatibility issues)
- Automatically backup of efs partition (from siyah initramfs)
Click to expand...
Click to collapse
Changelog SpeedWizz Kernel ICS 3.2
(from version 3.1)
- Added Overclock
- Added Undervolt Module (use Voltage Control)
- Touch recovery 5.8.1.5
- DVFS disable
- Fixed init.d support
- Frequency steps 200 - 1400 mhz
- Pegasusq governor tweaked (by Gokhan Moral)
Click to expand...
Click to collapse
Changelog SpeedWizz Kernel ICS 3.1
(from version 2.3)
- Reorganized the work directory to get a job to clean up
- Implemented the new patch of Hardcore (SpeedMod from K3-31)
- Minor bug fixes and minor tweaks
- Obviously kept the features added so far
- Removed all Undervolt to restore stability to the kernel and make it accessible from all devices
- (3.0 => 3.1) update the version of Linux kernel 3.0.15 to 3.0.40_rc1: the main change lies in optimizing file system dell'ext4
Click to expand...
Click to collapse
Changelog SpeedWizz Kernel ICS 2.3
(from version 2.2)
- Added full support to the bootanimation, it can be placed either in data / local and in system / media
- After reviewing all Undervolt of all sectors, in an attempt to make the kernel accessible to all devices and not only to some
- Fixed a minor problem with the root, which in some cases led to bootloop with some rom
Click to expand...
Click to collapse
Changelog SpeedWizz Kernel ICS 2.2
(from version 2.1)
- Undervolted many parts of the drivers
1. cPU internal
2. internal bus
3. Mali 400 voltages
4. screen voltages
5. touch panel
- Added compatibility with the CWM app manager Default.prop
from now on you can use it to its full potential.
- Switch set to the kernel ro.secure = 0 (adb shell commands as root) default.prop
The Undervolt when we say we are average (not aggressive) and everything works like a charm!
Click to expand...
Click to collapse
Changelog SpeedWizz Kernel ICS 2.1
(from version 2.0)
- Fixed the recovery__swapped partitions to prevent the recovery exchanges the internal with the external sd
- The following governors
1. pegasusQ
2. adaptive
3. interactive
4. conservative
5. userspace
6. powersave
7. ondemand
8. performance
- Maintained as the default ondemand governor
Click to expand...
Click to collapse
Changelog SpeedWizz Kernel ICS 2.0
(from version 1.0)
- Added support for Android 4.0.4
- Movhisty fix
- Patched _removed mmc cap erase KERNEL IS SAFE
- Implemented the patch of hardcore - root with superuser
- Cwm 5.0 for the time
- Voodoo louder working
- FM radio working
Click to expand...
Click to collapse
DOWNLOAD KERNEL 4.0.3
SpeedWizz Kernel ICS 1.0
Click to expand...
Click to collapse
Initial Release
Reserved too...
Mmmmhhh are you going to add aosp compatibility?
GhiGo65 said:
Mmmmhhh are you going to add aosp compatibility?
Click to expand...
Click to collapse
Yes... I am working on it.
Inviato dal mio GT-I9100 con Tapatalk 2
What's about battery
a0007 said:
What's about battery
Click to expand...
Click to collapse
Good life... I'm testing now
I like it!
Sent from my GT-I9100 using Tapatalk 2
He returns from the dead, hahahah
Too good this new kernel.
Performing the test since launch, super stable and battery consumption above average.
I just have a question, what is the best program to control compatible kernel.
I used Voltage control, but would like to use some other better if any??
Thanks Umberto
setimo said:
He returns from the dead, hahahah
Too good this new kernel.
Performing the test since launch, super stable and battery consumption above average.
I just have a question, what is the best program to control compatible kernel.
I used Voltage control, but would like to use some other better if any??
Thanks Umberto
Click to expand...
Click to collapse
OMG! I have started to cry reading this post, FINALLY someone brave enough to give this kernel a shot! Well done bro! Enjoy....
Ehm, seriusly, if you want you can use Nstools as well (and better): can control all the parameters that kernel provide plus it is a good alternative to BLN pro (to set the lost call service when enabled BLN)
Try and report, please
Ps.: you are welcome, my friend..
umberto1978 said:
OMG! I have started to cry reading this post, FINALLY someone brave enough to give this kernel a shot! Well done bro! Enjoy....
Ehm, seriusly, if you want you can use Nstools as well (and better): can control all the parameters that kernel provide plus it is a good alternative to BLN pro (to set the lost call service when enabled BLN)
Try and report, please
Ps.: you are welcome, my friend..
Click to expand...
Click to collapse
I'll test as soon as possible and already put the result and the final considerations, rsr.
Umberto, I noticed something in your kernel, it is not compatible with the application Away Triangle, because I tried to use the application with the same Kernel and does not work.
Now I do not know if it's the version of the kernel, or the Triangle Away works only with Syah Kernel.
I'm going to this friend, I need to get back to business, I need to have a meeting with my team.
EDIT:
Although not as experienced as the settings and use the Kernel, the app is very good NSTOOL with the kernel.
A friend here in Brazil told me about Rom Toolbox, I will also try and see what happens, lol.
hugs
Ur kernel is best. I love it!
Sent from my GT-I9100 using Tapatalk 2
setimo said:
I'll test as soon as possible and already put the result and the final considerations, rsr.
Umberto, I noticed something in your kernel, it is not compatible with the application Away Triangle, because I tried to use the application with the same Kernel and does not work.
Now I do not know if it's the version of the kernel, or the Triangle Away works only with Syah Kernel.
I'm going to this friend, I need to get back to business, I need to have a meeting with my team.
hugs
Click to expand...
Click to collapse
Mmmmhhhh... Strange.
Kernel should support TA. If not this mean that some of the most recent
Changes have breaked some thing.
I will investigate and repair asap.
For now you can use a compatible kernel like siyah, remove the triangle then if you want can flash speedwizz kernel using recovery, without increment counter and triangle.
Good life.
Inviato dal mio GT-I9100 con Tapatalk 2
umberto1978 said:
Mmmmhhhh... Strange.
Kernel should support TA. If not this mean that some of the most recent
Changes have breaked some thing.
I will investigate and repair asap.
For now you can use a compatible kernel like siyah, remove the triangle then if you want can flash speedwizz kernel using recovery, without increment counter and triangle.
Good life.
Inviato dal mio GT-I9100 con Tapatalk 2
Click to expand...
Click to collapse
Just as I did, I put Syah, removed the triangle and went back to Speed kernel 4.0, because I'm loving the performance of this new kernel.
I enjoyed seeing you again on your project developed, even if not with the whole of your time, but I was happy.
hugs brother
A new version is available for test, kernel now support multi rom, but DOESN'T BOOT WITH JB 4.1.2 (due to new mali driver).
For details before you use it see the first page or my blog.
Enjoy.
I'll update.
Enviado de meu GT-I9100 usando o Tapatalk 2
Ok, after a few days i can say this kernel is very Good... No lag, no bug and dual works perfectly.
:thumbup:
^
... i will wait for the final version.
:fingers-crossed:
Umberto, as passed halloween??
I had some small problems after they installed their latest version of the kernel, but do not know if that has something related.
My kid wont play Monster Life in Mobile, and soon after I installed the latest version of Kernel, I have noticed that the game crashes, having to turn off the phone and reconnects it, it has something to do with the kernel??
If helps, now make cleaning cache and davik too, and still have this problem sometimes
Hugs and great weekend.
setimo said:
Umberto, as passed halloween??
I had some small problems after they installed their latest version of the kernel, but do not know if that has something related.
My kid wont play Monster Life in Mobile, and soon after I installed the latest version of Kernel, I have noticed that the game crashes, having to turn off the phone and reconnects it, it has something to do with the kernel??
If helps, now make cleaning cache and davik too, and still have this problem sometimes
Hugs and great weekend.
Click to expand...
Click to collapse
If your problem is only with monster life I can tell you it is not kernel related: I've noticed that the crashes are reported as well in market comments.
Just if you are in doubt try with some other kernel and report, I can't try because I don't have a WiFi connection to download and play with it (around 115 mb if I am right).
Inviato dal mio GT-I9100 con Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 10.2 for the Samsung Galaxy Ace 2 ( GT-I8160 )
Brought to you by TeamCanjica
-----------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Video
Thanks zaryab360
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
Download the ROM from the link below
Download gapps on http://goo.im/gapps
Put the zip files on your SDCard
Reboot on Recovery
Wipe Data / Factory Reset
Select "Install the Zip from External Storage"
Choose CM zip file
Choose GApps zip file
Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download ( GT-I8160 )
Mirrors
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download ( GT-I8160P )
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the ROM Source available on TeamCanjica' s Github.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Credits
TeamCanjica
dh.harald, jereksel and SakuraDroid for contribution on codina sources
ekim.tecul for porting clean OMX fix on 4.3 roms
Domyre for providing us server !
munjeni and percy-g2 for Stability fix and help
Patrik Ryd STE Maintainer
asdfzz for help and testing
rabbitvcactus for downlaod mirrors
MaclawStudio for liblights and microphone fix
CyanogenMod Team
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDA:DevDB Information
CyanogenMod 10.2, a ROM for the Samsung Galaxy Ace II
Contributors
Rox, jereksel, TeamCanjica and everyone who took pat in Ace 2 development
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Any Ace II JB firmware
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: cm-10.2-UNOFFICIAL
Stable Release Date: 2014-02-27
Created 2013-10-23
Last Updated 2014-03-02
Bugs and Issues (28/07) :
None
--------------------------------------------------------------------------------------------------------------------------------------------------
Changelog:
28/07 :
CM Sources update
CPU OC v1.0.1 @cocafe
GPU OC v1.0.1 @cocafe
Linux 3.0.101 Kernel
Novathor Settings 1.5
SELinux support
EXFAT support
kernel fixes and tweaks
Removed pegasusq governor
Added CPU 100MHz freq step
Faster booting ( LZ4 compression )
Fixed CPU Min freq scaling
Fixed potential memory leaks
Tweaked Dalvik VM values
Don't compile power HAL ( buggy and useless )
2Tap2Wake feature implemented - @zwliew
Build more blobs from source (copybit, hwcomposer, gralloc ... )
Cleaning ( Cleaned init, removed unneded and not used services, files ... )
2014:
27/02 :
CM sources update
Fixed reboot to recovery
OTA App fixed FC
Fixed logcat power hal permission error
22/02 :
CM sources update
BT issues fixed
New STE Power hal
OTA app fixes
Added Sioplus scheduler
Added PegasusQ governor
Better ram managenemt
Kernel reverted to 3.0.31 version
Added Sweep2Wake trigger to advanced settings
Fixed Blackscreen issues for S6D27A1 driver
Testing OTA app
P version also updated
08/02 :
CM sources update
Fixed Wifi problems
Fix Galaxy Ace 2 settings charger control
Tearing fix for WS2401 driver
Testing Sweep2Wake feature - Thanks @cocafe
23/01 :
CM sources update
Removed buggy multi-user support
Updated translations in Ace 2 settings
Updated P verison too
19/01 :
CM sources update
Kernel updated to 3.0.101
Added abyssplug governor
Removed ondemandq governor
Fixed data download/upload arrows
Updated GT-I8160P version too
04/01 :
CM sources update
GPS Improved
Added support for 3 buttons headphones - Thanks to @PolishVodka
Uploaded GT-I8160P version too
01/01 :
CM sources update
Notification sound is not late anymore
Fixed apollo skip song when notification comes + DSP FC
SD card can be safetly removed
Swap storages option in advanced settings - Thanks to @e_c
Updated GT-I8160P version too ( Not available to download )
2013:
25/12 :
CM sources update
GT-I8160P Version ( NFC )
08/12 :
CM sources update
Fixed USB mass storage problems
Problems with 2g/3g toggle fixed
06/12 :
CM sources update
GPS fully fixed
Fixed 2G/3G toggle FC
29/11 :
CM sources update
Fixed problems for other screen driver
26/11 :
CM sources update
Improved GPS
24/11 :
CM sources update
Better Bootanimation look
Improved mass storage
Fixed cpu freq settings apps
More Camera features
18/11 :
CM sources update
STABILITY FIX - No more random reboots - Thanks to percy-g2 and munjeni
Fixed Low-Incall - Thanks to h3llrais3r
Fixed bluetooth settings
Removed USBdisk
Enabled KSM - Improved RAM management
Adb in recovery is working now
Build power.montblanc.so from sources
Not mounting preload as swap anymore
12/11 :
CM sources update
Fix signal bar problems
10/11 :
CM sources update
Fix mic and sound problems from last version
RIL improvements
Faster screenshoot taking
Surfaceflinger improvements
Fstab updated - Fixed sdcard problems
Mounting preload as swap partition
Swipe recovery function
Fix blackscreen bugs on S6D27A1 driver
SELinux disabled ( enabled Audit only )
04/11 :
CM sources update
Fixed 2G/3G toggle - Thanks to Macław Team
Sound glitches should be fixed now
OndemandQ governor added
SIO and ZEN io schedulers
Fixed BT tethering
Build should be more stable
Problems for users with other screen driver should be resolved
Deleted buggy MultiWindow for now
31/10 :
CM sources update
Fixed CRT-Off Screen animation
Devices with other screen driver now shouldn't have problems with booting
27/10 :
CM sources update
No more chanches for broken internal storage
Updated RIL
26/10 :
CM sources update
Fix Torch toggle in QuickSettings
Fixed Torch turning on delay
Disabled CRT-off because it is broken
Softkey vibrations - Thanks to @PolishVodka
Galaxy Ace II settings app
23/10 :
Initial Release
--------------------------------------------------------------------------------------------------------------------------------------------------
Next Version :
CM Sources update
CPU OC v1.0.1 @cocafe
GPU OC v1.0.1 @cocafe
Linux 3.0.101 Kernel
Novathor Settings 1.5
SELinux support
EXFAT support
kernel fixes and tweaks
Removed pegasusq governor
Added CPU 100MHz freq step
Faster booting ( LZ4 compression )
Fixed CPU Min freq scaling
Fixed potential memory leaks
Tweaked Dalvik VM values
Don't compile power HAL ( buggy and useless )
2Tap2Wake feature implemented - @zwliew
Build more blobs from source (copybit, hwcomposer, gralloc ... )
Cleaning ( Cleaned init, removed unneded and not used services, files ... )
--------------------------------------------------------------------------------------------------------------------------------------------------
Tips :
If you are updating from previous version it is enough to wipe cache only
First boot takes a while. Wait at least 5 mins for it to boot.
To activate Developer settings : Settings -> About phone -> press Build number 5 times
To activate 3-way reboot go to Developer settings and select "Advanced reboot"
First Wi-Fi connecting can take a while
You can switch internal and external storage in Ace 2 settings, also flashable zip you can find in Download section
If you don't like button led notifications you can flash this ZIP to turn them off - Thanks to @PolishVodka. You can use built in button settings to turn leds completely off.
Thank you for the release, downloading as I speak.
Amazing :laugh: I need flash MG2 stock rom ?
no, but it is recommended
Bugs ?
Sent from my GT-I9505 using xda app-developers app
i dont see under bugs list so i ask, is recovery option from advanced menu working?
it should work, i didnt tested last fix.. report if working
only bug should be low incall but maybe there are new bugs
Very good Rox, your first build of cm10.2 and seems to have very little bugs. I am downloading it now, I will install it and test it straight away :good:
"Cyanogenmod Account has crashed" okay, works fine anyways
EDIT: first boot
@Rox
Is there a recovery loop ?
Wysłane z mojego GT-I8160 przy użyciu Tapatalka
How game run on this rom?
Inviato dal mio GT-I8160 con Tapatalk 2
Amazing i was waiting for this rom.
Finally
Sent from my GT-P3100 using Tapatalk
teddytsen said:
"Cyanogenmod Account has crashed" okay, works fine anyways
EDIT: first boot
Click to expand...
Click to collapse
But that is when u get network after first boot and sys automatically switches english to a language of the land u live in, isn't it?
Sent from my GT-I8160 using xda app-developers app
There are modified vold or need add this to build.prop?
persist.sys.vold.switchexternal=1
ro.vold.switchablepair=/storage/sdcard0,/storage/sdcard1
YouTube app and viewing in browser workin fine. Adfree not workin here (also not on french guy's CM 10.2)
Sent from my GT-I8160 using xda app-developers app
Yeaayyy finally!
I will wait for a week and see is there another bug in this ROM or just only the low volume in-call
btw nice work team canjica!
Vangonaj said:
There are modified vold or need add this to build.prop?
persist.sys.vold.switchexternal=1
ro.vold.switchablepair=/storage/sdcard0,/storage/sdcard1
Click to expand...
Click to collapse
add that to build.prop
ZubrowkaBiala said:
@Rox
Is there a recovery loop ?
Wysłane z mojego GT-I8160 przy użyciu Tapatalka
Click to expand...
Click to collapse
recovery from reboot menu working fine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[ROM][4.3.1][Jelly Bean] Carbon ROM [Unofficial][2014-05-0x], a ROM for the Samsung Galaxy Ace II
Contributors: judas1977, Rox, jereksel, criminal, Zwliew, cocafe and others
ROM OS Version: 4.3.1
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Any JB ROM for Galaxy Ace II
Based On: AOSP(?)
Recovery: CWM
Version Information
Status: Stable Beta
Last update: 2014-05-05
----------
Carbon JB [4.3.1.] Unnofficial for the Galaxy Ace II (Codina)
I take no resposibility if something will go... not as it supposed to. The responsibility for potential damages caused by installing or using of this ROM is Yours, and Yours only!
My ROM is released „as is” – you don’t like it – don’t use it.
--------------------------------------------------------------------------------------------------------------------------------------
Important!
Any Galaxy Ace II ROM based on Android 4.2.x+ has to be installed over Android 4.1.x+ (stock ROM, CM-like customs). You will need custom recovery (temporary one is good enough)
It is strongly recommended to make a backup before installing of ANY ROM!
------------------------------------------------------------------------------------------------------------------------
You can follow my activities on My Wordpress Blog
Download:
BUILD 8 - RC4 [2014-05-05]
Older builds (may be non available anymore):
BUILD 7 - RC3 [2014-02-27]
BUILD 6 - RC2 [2014-01-21]
BUILD 5 - RC1 [2013-12-17]
BUILD 4 [2013-11-21]
BUILD 3 [2013-11-03]
BUILD 1 [2013-10-27]
Gapps
Gapps - minimal version [2013-10-27]
Low in-call volume fix (thanks to mikesz98 from polish android forum)
Issues (or simply not working):
- Carbon Fibers stops working ONCE after EVERY reboot (common issue on some other devices)
- You tell me
History:
BUILD 8 [2014-05-05]
- CPU Overclocking
- GPU Overclocking
- GPU & CPU undervolting
- New NovaThor Settings adde
- Various optimalisations
Build 7 RC3 [2014-02-27]
- Kernel reverted to 3.0.31
- BT issues fixed
- New STE Power hal
- Added Sioplus scheduler
- Added PegasusQ governor
- Better ram managenemt
- Added Sweep2Wake trigger to advanced settings
- Galaxy Ace 2 settings charger control fixed
- Carbon Fibers: removed empty System->Device tunables submenu
- Carbon Fibers: minor updates of polish translation
- Polish translation of Galaxy Ace 2 Settings (Advanced Device Settings)
- Removed unneeded GooManager.apk
Build 6 – RC2 [2014-01-21]
* Updated device and ROM sources [2014-01-21]
* Kernel updated to 3.0.101 (thanx to @Rox, @hafidzduddin, @cocafe, @dh-harald, @KINGbabasula and everyone involved):
- Added abyssplug governor
- Removed ondemandq governor and some I/O schedulers
- Fixed data download/upload arrows
* Notification sound is not late anymore
* Fixed apollo skip song when notification comes + DSP FC
* Swap storages option in advanced settings - Thanks to @Rox and @e_c
* Removed unused (empty) “Advanced” submenu in Display settings, which causes FC’s when pressed.
Build 5 - RC1 [2013-12-17]
* Updated sources [Device and ROM: 2013-12-17]
* Fixed GPS. Hmmm... works better than before, but I think still not as good as in my SlimBean 4.3 for example. Strange, because it uses the same settings.
* Fixed 2g/2g+3g quick settings tile
* Set SD Card as removable (you can safely unmount now)
Build 4 [2013-11-21]
* Updated sources [Device and ROM: 2013-11-20]:
- Improved stability (thx @Rox, Teamcanjica, Percy-g2 and Munjeni)
- Fixed random reboot issue
- Added KSM feature
* Added (partial) polish translation of Carbon Fibers (thx Mikesz98)
Build 3 [2013-11-03]
* updated sources (device and ROM)
* fixed CRT off animation (or it wasn't broken anyway? )
Build 2 [2013-11-01][unreleased]
* low in-call volume fix
Build 1 [2013-10-27]
* Initial release
As it could be my final version of Carbon ROM (and maybe my last Codina’s public ROM ever), I want to add few words…
I’m pretty sure that @Rox – our main device sources maintainer - deserves for a special thanks. I watched your progress – starting from “simple” theming You became our local hero, learning fast. I believe that the knowledge You achieved playing with our Samsung Galaxy Ace II will help you to find “a job from your dreams” in your mature life (do not hurry). I’m aware that without Your work I just couldn’t “get” Carbon (or Chameleon OS, or whatever) in current state. So once again – thanks for Your contribution!!!
To do list:
· Fixing Carbon Fibers FC’s after turning phone on
· Additional polish translation (other languages, maybe?**)
· Adding mobile data indicator arrows
** If you have free time and want to add your language translation to system apps – feel free to contact me.
Installation:
1. Put ROM’s Zip file Zip z ROMem (and other zip files - optionally) on SD Card
2. Enter Recovery Mode
3. Pick options:
a) Wipe Data/Factory Reset
b) In „mounts and storage” choose: Format System
c) (just in case) Mount system partition (it supposed to be „unmount” visible)
4. Choose Install Zip (or similar, depends on recovery version)
a) Install ROM from SD card
5. (optional) installing Gapps and other add-ons
a) In „mounts and storage” Mount /system (as described above)
b) Choose install zip and install chosen add-on
c) repeat a and b points for any other add-on
6. Reboot Phone (first BOOT could take a while)
Github Sources:
Teamcanjica
Carbon ROM
Thanks:
- Samsung – for a decent phone;
- CyanogenMOD Team, Carbon Dev Team – for ROM sources;
- TeamCanjica, dh.harald i SakuraDroid – for great contribution to codina device/kernel sources;
- mikesz98, percy-g2, munjeni - fixes, translations
- everybody who deserves it, but i forgot because of my faulty memory.
Like my work? Donate to me:
Some screenshots (miui theme)
[C]
[/c]
Wysłane z mojego GT-i8160 przy użyciu Tapatalk
ss
can you share the screenshot ??
btw it's great job :good:
Great... Just another great ROM...
Thank you judas...
Btw, some screenshots pls, if possible....??
What about advance reboot? Is it working?
Sent from my GT-I8160 using Tapatalk
upilguebu said:
What about advance reboot? Is it working?
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
yea
EDIT: smoother than ChaOS, blue balls is awesome
Really? I was afraid to check it
Wysłane z mojego GT-i8160 przy użyciu Tapatalk
Yes, i know that you are totally absorbed in all that "kitkatish" things, OC and many more important things, but maybe (just maybe) somebody will find it interesting...
Build 7 - Aroma Final [28-01-2014]
* Fixed Torch turning on delay
* Fix new YT app hangs and browser videos
* Added, using Aroma Installer:
* - Memory Swap possibility
* - Disabling Buttons Backlights possibility
* - New Host file thx to @BSDgeek_Jake
* - Alternative Kitkat fonts
* - Possibility to install/bypass non crucial system apps
* Removed Backup Tools (be careful)
* Final Build [probably]
Build 6 [23-01-2014]
* First (unreleased) version by @judas77
* LPM charging fixed
* Optimized waking up time
* Advanced Ace 2 settings added**
* Fixed "Can't mute mic in phone app" bug
* Stability fixes
* OndemandQ governor added
* SIO and ZEN io schedulers added
* Fix Low-incall - Thanks to @h3llrais3r
* KSM enabling added - better RAM management
Bugs written down on OP:
Low incall volume
Wake up delay
SIM Card Contacts
Mute in phone app
LPM charging*
I wish this will be installed in my phone. It doesn't like 4.3 roms
Sent from my GT-I8160 using XDA Premium 4 mobile app
This rom have hybrid properties (per app dpi/layout)?
looks nice, would like to try, hopefully can get in my phone
Sent from my GT-I8160 using XDA Premium 4 mobile app
str3tch72 said:
I wish this will be installed in my phone. It doesn't like 4.3 roms
Sent from my GT-I8160 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Mine too. I have had Cm10.2 but it crashed and after that Android 4.3 hasn't worked again (up to now, maybe I try to get it working again, or I am just going to buy the Nexus 5 ).
k, will install this ROM after bored with CM10.2
Decided to give this a spin just out of curiosity and to see what it's like. (never used Carbon ROM before)
I'm curious whether the low incall patch for CM10.2 would also work with this... i'm not sure of the differences in the phone APK if any..
str3tch72 said:
I wish this will be installed in my phone. It doesn't like 4.3 roms
Sent from my GT-I8160 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Str3tch72, did you successfully install this rom on your phone? in my phone stuck in samsung logo, the same thing as when I install the latest build of CM10.2
Sent from my GT-I8160 using XDA Premium 4 mobile app
what is the best JB Base ROM for flashing this ROM?
cilixan said:
Str3tch72, did you successfully install this rom on your phone? in my phone stuck in samsung logo, the same thing as when I install the latest build of CM10.2
Click to expand...
Click to collapse
your flashing method is wrong, then.
have you read flashing procedure, mate?
Rieyan said:
what is the best JB Base ROM for flashing this ROM?
Click to expand...
Click to collapse
ANY jb Rom will do.
Edit: low in-call fix breaks RIL, just as I suspected...
judas1977 said:
ANY jb Rom will do.
Edit: low in-call fix breaks RIL, just as I suspected...
Click to expand...
Click to collapse
Thanks for your fast response..
I'll try to flash this ROM from XXMG2 Greece (Cosmote) JB 4.1.2 Base ROM.
I found Ringtone Delay bug on any other 4.3.1 Custom ROM. when I receive a notification, i see the notification icon on statusbar, but the ringtone is delaying (2 or 3 seconds after the notification icon shows on statusbar, sometimes I only hear half notification ringtones), if I find any bug on this ROM, I'll report it to you
and one more question..
I see MIUI Style on this ROM, can I use MIUI themes for this ROM (*.mtz file)?
great work, thanks!!
this rom have transition animation like rootbox and listview animation?
pupakota said:
your flashing method is wrong, then.
have you read flashing procedure, mate?
Click to expand...
Click to collapse
Yes, I have done this. but it's still stuck in the Samsung logo ( such as during install cm10.2 latest build. build 23/10 working well )
Sent from my GT-I8160 using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SlimKangs Moto X
These are self-compiled builds of the Latest SlimKat source including added features and build optimizations to enhance Slim's already great experience. Don't flash this if you’re not comfortable with testing out new and possibly broken features. Credits and Thanks to The SlimRom team, CyanogenMod, Rascarlo, BeerGang, temasek, Cristiano Matos, sbradymobile, Paranoid Android, Der_Schubi, fusionjack, sparksco, flar2, Faux123, FranciscoFranco, Morphic, and [email protected] for Hosting.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
HOW TO INSTALL
First Time Installing
Download the Rom
Download compatible Gapps
Reboot to TWRP
WIPE DATA/FACTORY RESET
Flash the Rom
Flash Gapps
Reboot
Already Installed SlimKangs
Download the Rom
Reboot to TWRP
WIPE Cache
WIPE Dalvik Cache
Flash the Rom
Reboot
Changelog and Rom Downloads in POST #2
MISC LINKS
Gapps
Kernel Source
SlimRom Source
SlimRoms.net
If Cherry Picks/Feature's disappear, it's because they were merged, abandoned or conflict with the current source or other cherry picks
Current Build
Build 11 [2014/10/17]
md5: a8cd5aa1258f904e883ebcb94d5bb1cd
Latest Slimkat source
Latest CM ghost kernel updates
ghost: proximity check before wake option
Make Swap volume buttons configurable
Force Expanded Notifications option
Option to Reduce volume to safe level when headset is connected
Over scroll effects
Update SuperSU
Dual panel settings option
Previous Builds/Changelog
Build 10 [2014/10/12]
md5: e72554979b8a97c8528b80100976564d
Rebased Now includes the following updates:
Latest Slimkat source
Latest CM ghost kernel with many updates including updates up to 3.4.103, OC, voltage control, Fsync, fauxsound, Lz4 compresssion, ETC.. Use trickstermod/ FauxSound to configure... See git for full kernel change log Link
Kernel compiled with linaro 4.9 toolchain
Unnecessary apps removed from build to save space (AOSP Browser, AOSP Music, SlimCenter, SlimFileManager, DashClock)
Lockscreen Blur
Lockscreen notifications
settings: Make mobile settings a first-class citizen and update icon
Heads up: option to disable in lockscreen
Heads up master switch
SlimRecent: Make it optional
Revert CM superuser and add built in SuperSU
AOKP custom system animations
Statusbar: Make double tap gesture configurable
Display Settings: Better font size control
Settings: Add TricksterMod header and remove if app is not installed
Settings: Add FauxSound header and remove if app is not installed
Settings: Add FauxClock header and remove if app is not installed
Settings: Add FrancoKernel utility header and remove if app is not installed
Settings: bring back the status bar activity indicators for mobile data and wifi
Add direct launcher prefs access to home settings fragment
Comment out SlimCenter
Owner is always a dev
Status Bar: Network usage stats
Remove custom Slim default DPI's
Set audio volume steps from 15 to 30
AOSP Recents: add clear all recents button
NavBar: shorter glow animation
Smooth background gradient
AOSP Recents: Allow live wallpaper background
Various Frameworks fix's and tweaks
Build 9 [2014/08/01]
MIRROR
md5: 8882731c69d039a8c9ed25cef5df2f61
Latest Slimkat source
Updated kernel to 3.4.101
Merge updates from DHacker's Team gummy kernel (Caf, and prima updates)
Bring back hardware key settings for Obake users
Add Slimrecents background color & transparency settings from slim gerrit
Build 8 [2014/07/30]
MIRROR
md5: e323b1982744ce69e4ecc8aab861d3a5
Update toolchains.. Linaro 4.9 for kernel, Linaro 4.8 for ROM.
Update kernel to latest 3.4.100
Latest Slimkat source
Update SuperSU
Enable overlay option to turn on/off battery full and, notification led (Only works with AC power connected)
Build 7 [2014/07/12]
MIRROR
md5: 33a05ac220399c7eea6c8de00aa94401
Clean up build flags
Art runtime now works (Option is in Dev settings, Make sure your gapps are compatible with ART!! I suggest PA gapps.)
Hide notification light, and hardware key settings as we dont need them showing.
Prebuilt: Update Nova Launcher to version 3.0.2
Build 6
Latest SlimKat source (Including Slim Heads Up.)
Latest Cm kernel updates (kernel version 3.4.97)
Revert prima update in kernel. (Should fix WiFi wakelock draining battery.)
Added back 480-1080P video recording profile. 480-1080P will still freeze AOSP camera, You can only record in CIF res with AOSP camera app.
Added OpenCamera to the rom. Can use full res in photo/video!!Playstore Link
frameworks/av updates for Slim gerrit
Build 5 [2014/06/30]
MIRROR
md5: 7686d0b99472765ba4d77dcc5381a6f1
Latest SlimKat source
Heads up
Revert: Change density on the fly
Build 4 [2014/06/22]
MIRROR
md5: 71ee69392c773ce778726ae95a928886
Latest SlimKat source (android-4.4.4_r1)
Updated kernel to latest CM updates (3.4.94)
Updated device tree to latest CM updates
Updated SuperSU v2.00
Build 3 [2014/06/08]
MIRROR
md5: 4a68aa7feeb150e38545cefe38812363
Latest SlimKat source (android-4.4.3_r1.1)
Updated kernel to latest CM repo (3.4.91)
Add Motorola system info to phone info screen
Update arm-linux-androideabi toolchain to 4.8.4
Build 2 [2014/06/01]
MIRROR
md5: 01ccb1094e70c69be073eb79fba8617e
Rom and Kernel compiled with SaberMod 4.8.3 Toolchains
Latest SlimKat source
Active display with supporting commmits and bug fixes (still a WIP)
Update build flags with -fgcse-las
Update kernel build flags to -Ofast and other optimization flags for Krait chips.
Build 1 [2014/05/26]
MIRROR
md5: 62a9a332648af69b25e846502ea4bba3
Rom and Kernel compiled with SaberMod 4.8.3 Toolchains
Tons of Linaro fix's for the default optimization flags that include -O3, and strict-aliasing
Latest SlimKat source
Revert Koush's Superuser and add embedded SuperSu
Slim: Change density on the fly
Remove Dashclock, AOSP Music, SlimCenter, SlimFileManager, SlimIRC
DocumentsUI: Add a standalone File Manager
DocumentsUI: Allow open files instead of URIs
AOKP custom system animations
Configurable status bar activity indicators for mobile data and wifi
Default gradient fix
NavBar shorter glow animation
Add network usage stats to status bar.. Including timeout, and color options
Update the color of the expandable volume panel icon
Various frameworks fixes and optimizations
Settings: Remove "mobile plan"
Settings: Remove System update activity
Settings: Move mobile settings to settings header
Settings: Add TricksterMod, FauxClock and FauxSound preference to settings header... Also removes preference when app is not installed
Add direct launcher settings access to home settings fragment.
Dalvik and Bionic optimizations
CyanogenMod based moto_msm8960dt kernel including:
Updated compiler flags including -O3, mtune=cortex-a15, mfpu=neon-vfpv4, and mcpu=cortex-a8.
lib/memcopy: use glibc version
lib/string: use glibc version
Optimized ARM RWSEM algorithm
lib/int_sqrt.c: optimize square root algorithm
arm/crypto: Add optimized AES and SHA1 routines
Voltage Control
Add SIO I/O scheduler
Add FIOPS I/O scheduler
Faux Sound Control
Fastcharge
Tweaked Deadline scheduler
Franco's ROW, and CFQ magic values.
fsync control
Morphic's ondemand tunables
Slimbus OC
CPU OC to 1.9Ghz
GPU OC to 450Mhz
Remove useless Debugging
Writeback tweaks
binfmt_elf.c: use get_random_int() to fix entropy depleting
Add /dev/frandom device support
mm: Set VM_MAX_READAHEAD to 512 as default
And more check git for more details!!
Known Bugs
CM11 ghost bugs
This rom got the faux kernel?
Sent from Moto X
does the camera work on this rom or is it like the rest of the aosp roms (random camera issues)?
Mont said:
This rom got the faux kernel?
Sent from Moto X
Click to expand...
Click to collapse
No its Cm based with added features
pottyvick said:
does the camera work on this rom or is it like the rest of the aosp roms (random camera issues)?
Click to expand...
Click to collapse
Haven't experienced any issues in testing the last few days.
I will flash this now and report any issues
Looks pretty sweet. Have to give it a flash tomorrow evening. Haven't run a AOSP ROM yet. What's the preferred App for Active Display?
Sent from my LG-V510 using Tapatalk
rebretz000 said:
Looks pretty sweet. Have to give it a flash tomorrow evening. Haven't run a AOSP ROM yet. What's the preferred App for Active Display?
Sent from my LG-V510 using Tapatalk
Click to expand...
Click to collapse
AcDisplay on the playstore
Sent from my XT1060 using Tapatalk
A few bugs: Play download caused a reboot.
On nearly every reboot a 2nd reboot is needed to fix WiFi & BT.
There is no Google (voice) search via BT. Eg call Wife.
But Way cool otherwise. Saved a BU & will wait.
aviwdoowks said:
A few bugs: Play download caused a reboot.
On nearly every reboot a 2nd reboot is needed to fix WiFi & BT.
There is no Google (voice) search via BT. Eg call Wife.
But Way cool otherwise. Saved a BU & will wait.
Click to expand...
Click to collapse
Haven't had any issues downloading from play. I don't have a BT headset so I can't test that, dose the hotword detection thru BT normal work on AOSP ROMs?
Sent from my Moto X using Tapatalk
I don't have any problem. The best rom, really smooth. Great job man, im wait for new builds
Enviado desde mi Moto X mediante Tapatalk
Anyone else having trouble downloading files and such?
Sent from my DROID MAXX using Tapatalk
jakereeves31 said:
Anyone else having trouble downloading files and such?
Sent from my DROID MAXX using Tapatalk
Click to expand...
Click to collapse
Been pretty stable for me downloading files and torrents.. what is happening to your DL's?
Sent from my Nexus 7 using Tapatalk
DJLamontagneIII said:
Been pretty stable for me downloading files and torrents.. what is happening to your DL's?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
They all fail. I think my strorage is jacked up. I would post some screen shots of my files, but they won't even save. I have a sdcard0 folder and a emulated folder and in the emulated folder it has a 0 folder and a legacy folder. Inside the 0, legacy, and sdcard0 folder they all have the same things inside of them. So, they're all the exactly the same. I don't get it, but I'm pretty sure that has to be my issue.
Sent from my DROID MAXX using Tapatalk
Is this an msm8960dt build or just for the X?
Sent from an unlocked and unVerizon'd Droid Maxx
lafont28 said:
Is this an msm8960dt build or just for the X?
Sent from an unlocked and unVerizon'd Droid Maxx
Click to expand...
Click to collapse
msm8960dt kernel and device tree so it should work.
Sent from my Moto X using Tapatalk
jakereeves31 said:
They all fail. I think my strorage is jacked up. I would post some screen shots of my files, but they won't even save. I have a sdcard0 folder and a emulated folder and in the emulated folder it has a 0 folder and a legacy folder. Inside the 0, legacy, and sdcard0 folder they all have the same things inside of them. So, they're all the exactly the same. I don't get it, but I'm pretty sure that has to be my issue.
Sent from my DROID MAXX using Tapatalk
Click to expand...
Click to collapse
That file structure is normal it started around the JB release there just symlinks. That's weird tho, did you come from s fresh install or flash over another slim build.
Sent from my Moto X using Tapatalk
@DJLamontagneIII It was a fresh install. My gallery won't even read all my pics from my storage. It says no external storage available.
Sent from my DROID MAXX using Tapatalk
jakereeves31 said:
@DJLamontagneIII It was a fresh install. My gallery won't even read all my pics from my storage. It says no external storage available.
Sent from my DROID MAXX using Tapatalk
Click to expand...
Click to collapse
Yea that's weird I'd try to install again with a fresh DL. Should work on all of the msm8960dt family because its unified but what device are you using?
Sent from my Moto X using Tapatalk
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
All bug reports that don't meet this conditions will be ignored:
You have the kernel provided in the zip file
You made a clean flash and didn't restore anything
You made a detailed review of the problem
You provide a logcat in a .txt file (Search internet)
You provide dmesg or last_kmsg if it is a kernel panic (Search internet)
What's working :
Booting
RIL and Mobile Data
Dual-Sim
Storages (Internal and External)
Notification Led
Flashlight
Sound
Wi-Fi
Bluetooth
GPS
Tethering (BT, Wi-Fi, USB)
Sensors
Video playback
Camera
Browser
What's not working :
NFC (causes instability)
Fm Radio
Cpu Governors SmartassV2 and H3 causing instability
Other stuff that is not here
I DO NOT RECOMMEND USING CM CAMERA (it can stuck and you need to restart); USE OpenCamera INSTEAD!!!
Care with volume. Lower until no cracking sound is present
Instructions :
Reboot to the latest TWRP/CWM/Philz
Make a full wipe (/system, /data, /cache, /dalvik-cache, /internal storage)
Flash the CM11 zip
Flash the four_button.zip (if you have dual)
Make factory reset
Reboot to system
Flash Gapps (if you want) => you need to test which work. Flash pico please or you will have crashes. You need to test this. FLASH ONLY AFTER FIRST BOOT
You can also flash Gapps before booting (after CM11) but if you know how to skip initialization screen (the clockwise press trick). If you don't know what I am talking about, don't ask use the flash after first boot method.
You will not have a setup wizard because I am using INIT to set device model. Please use settings to set up your stuff.
Downloads :
ROM:
cm-11-20160306-UNOFFICIAL-vee7-RC3.zip
md5: 95b61238767d250a06891461ef4a7882
four_button.:
four_button_RC3.zip
md5: 0c03597aa15338f1362c26d44f52d5d6
Credits :
@Dazzozo
@luca020400
@skyinfo
@weritos
@Caio99BR
@Kra1o5
@fonz93
TeamHackLg
CyanogenMod
Xda for this nice home
Donators (BIG THANKS!!!) :
@vlmaxx
The source code is entirely available here: https://github.com/Cyanogenmod11-vee7
XDA:DevDB Information
NCyanogenMod 11, ROM for the LG Optimus L7 II
Contributors
neutrondev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod 11
Version Information
Status: Beta
Created 2015-06-12
Last Updated 2015-06-12
Reserved
Changelog:
RC3(06-03-2016)
Fm needs to much work and I don't have time; reverted that
reverted overclock causes problems
removed kernel stuff that caused instability
visual performance should be better now
removed hwcomposer
removed vsync ( we don't support that )
added headphones image when headphone is plugged
added the flashlight thing in drop-down menu
fixed blue video in camera
RC2(27-02-2016)
Initial commits for FM radio
Kernel changes:
fixed memory leaks in ext4
improved ext4 speed
added frontswap
limited max readahead to 1MB
improved response of the UI
added sio, sioplus, bfq, fiops, row I/O
changed default I/O to sio (best for our device)
dynamic read-ahead support
3 times faster integer SQRT operation
frandom entropy (way faster then urandom)
removed useless 320 KHz freq from CPU (more aggressive scaling, to be more responsive)
overclocked to 1036 GHz
Enabled ZCACHE
Enabled ZRAM
RC1 (26-02-2016)
reworked device tree, kernel tree entirely
now all is united under vee7
baseband search to set version
camera now compiled from source (focus while in video mode works); the restriction is still clear. no pause on videos
speed should be improved
battery drain should be gone
dual sim most likely fixed (needs confirmation)
enabled ZRAM
enabled ZCHACE
Beta 2 (19-06-2015)
[fixed] Browser
[fixed] Camera
[fixed] GPS, was not locking right
[observed] Battery drain
Beta 1 (12-06-2015) -> not public
[fixed] entire sound
[fixed] browser crash
[added] dual-sim support
[updated] RIL area
Alpha 2 (11-06-2015) -> not public
[fixed] internal storage
[fixed] part of sound
[fixed] flashlight
[working on] camera
Alpha 1 (08-06-2015) -> not public
Initial bringup
Reserved
Frequently asked questions (FAQ) and Instructions:
QUESTIONS AND ANSWERS:
1. How to enable Developer Option?
Go to Settings->About phone->Build number->Tap on it 7 times.
2. How to enable USB Debugging?
After you enable Developer Option go to Settings->Developer options->Check USB debugging.
3. How to enable Reboot recovery from the reboot menu?
Go to Settings->Developer options->Check Advanced reboot.
4. How to disable Home key unlock (it is enabled by default)?
Go to Settings->Buttons->Uncheck Home button wake.
5. Do you want faster UI?
Go to Settings->Developer options->Scroll down to DRAWING->Set Transition animation scale and Animation duration scale and (Optional: Windows animation scale) to Animation scale .5x
You are reworking it from source or it's werito's port just edited?
tomcis147 said:
You are reworking it from source or it's werito's port just edited?
Click to expand...
Click to collapse
As I said this is my last project. It contains my source.
Finally
Good work
Thank you for this final effort. And thank you for the TWRP 2.8.6.0(doesn't flip the screen on reboot anymore).
I'll be sure to try your CM11 rom once I'm out of university for the summer.
This is amazing. Been waiting for CM11 all my life. Good luck in this and in all your future projects neutrondev!
Sent from my [email protected] by neutrondev using XDA Free mobile app
neutrondev said:
As I said this is my last project. It contains my source.
Click to expand...
Click to collapse
I wish there will not be a battery drain the battery is more stable than the cm10.2. Hahahha. Good Luck with this sir.
What you mean with "not working browser" ?
luca020400 said:
What you mean with "not working browser" ?
Click to expand...
Click to collapse
Probly web view framework is not working that renders websites
luca020400 said:
What you mean with "not working browser" ?
Click to expand...
Click to collapse
I am using chromium webview not classic and genlock has some problems. It is a genlock problem that is also related to webview when I will have time I will investigate it
By the way, and it came to me just now, is it possible for you to include the following options?
- turn on/off the annoying "safe headset volume" message
- turn on/off camera shutter sound
- turn on/off heptic feedback(vibration on unlock/hold home key/input pin code when turning the device on)
- custom power off and restart option: reboot/reboot to recovery/reboot to boodloader
Those would be very comfortable for most of us, if not for everyone. Currently on the purified stock v2(KK 4.4.2) i have to use:
- GravityBox(Xposed) for headset volume message and custom restart options
- Open Camera(from play store) because it has an option to mute shutter sound
- Spare Parts to remove heptic feedback(although you can uninstall the app and still have heptic feedback disabled)
My whole point is to have the above mentioned options native to the ROM itself without using third party apps/frameworks.
shhnedo said:
By the way, and it came to me just now, is it possible for you to include the following options?
- turn on/off the annoying "safe headset volume" message
- turn on/off camera shutter sound
- turn on/off heptic feedback(vibration on unlock/hold home key/input pin code when turning the device on)
- custom power off and restart option: reboot/reboot to recovery/reboot to boodloader
Those would be very comfortable for most of us, if not for everyone. Currently on the purified stock v2(KK 4.4.2) i have to use:
- GravityBox(Xposed) for headset volume message and custom restart options
- Open Camera(from play store) because it has an option to mute shutter sound
- Spare Parts to remove heptic feedback(although you can uninstall the app and still have heptic feedback disabled)
My whole point is to have the above mentioned options native to the ROM itself without using third party apps/frameworks.
Click to expand...
Click to collapse
Haptic feedback in stock KitKat need to edit build.prop, in CyanogenMod you can enable and disable in sound settings and lock screen settings. Advanced restart mode in developer options (I think only CyanogenMod, not sure stock roms)
Sent from my p710 using XDA Free mobile app
What are the main differences between this build and @weritos one? In what way it's expected to be better?
doubt
When can we download ?
Wesley Silva said:
When can we download ?
Click to expand...
Click to collapse
You will see when, don't ask for eta.
Build will arrive soon. The thing is that I want to use Chromium Webview (it is new starting from kitkat). Before kitkat classic webview was used. I can use an external classic but I want to update the stuff to work with Chromium one.
Well just some updates. Found time to work today. Camera got fully fixed (Resume now works). I adverted GPS working. Well trying to get a signal it could not lock. That is also fixed now. I just switched to Classic Web View since exams are comming and I see no problems. We can count browser also fixed. Maybe tomorrow is a good day to release an RC already. Will test until then. Peace out.
neutrondev said:
Well just some updates. Found time to work today. Camera got fully fixed (Resume now works). I adverted GPS working. Well trying to get a signal it could not lock. That is also fixed now. I just switched to Classic Web View since exams are comming and I see no problems. We can count browser also fixed. Maybe tomorrow is a good day to release an RC already. Will test until then. Peace out.
Click to expand...
Click to collapse
What exactly are nightly builds? I searched a lot but still not sure how that will work with this rom. Sorry if I'm too dumb and thanks in advance!
Edit: And another question, no battery drain at the moment? (Is not listed in known issues so I guess is fixed or never wasn't there)
Sent from my p710 using XDA Free mobile app