Related
Hi,
I read up on the Omega v5.2 ROM and it looks very good. I just want to know from those who are already using it, how much better performance is it using the recommended version whcih I think is called the "Default" vs the stock firmware? It is that much smoother and better battery performance?
NocNoc9595 said:
Hi,
I read up on the Omega v5.2 ROM and it looks very good. I just want to know from those who are already using it, how much better performance is it using the recommended version whcih I think is called the "Default" vs the stock firmware? It is that much smoother and better battery performance?
Click to expand...
Click to collapse
No its far to early to be better by anything but a very small margin .
Battery performance is down to the user not the firmware .
jje
JJEgan said:
No its far to early to be better by anything but a very small margin .
Battery performance is down to the user not the firmware .
jje
Click to expand...
Click to collapse
Would you happen to know what apps are removed in the "Bloated Apps Removed version" of the ROM? I can't find the list of apps the developer removed.
NocNoc9595 said:
Would you happen to know what apps are removed in the "Bloated Apps Removed version" of the ROM? I can't find the list of apps the developer removed.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26636429&postcount=166
Tried Omega 4.2 and 5.2 briefly. Both times it broke Navigon and the camera hung on me. Don't see any benefit of the Hyperx mod. 5.2 caused my phone to warm up noticably.
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
NocNoc9595 said:
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
Click to expand...
Click to collapse
Have you done ANY research in the main thread? I don't think so, as all of this is covered there, including instructions (theres even a video to walk you through it). Don't be lazy.
NocNoc9595 said:
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
Click to expand...
Click to collapse
A full wipe is the recommend, because then you have a clean installation and you beware of strange failures.
An instruction how you should flash Omega ROM is in the development thread (4th post) --> Installation Guide
I don't know if your phone is rootet yet, if so skip the first step and start with booting in CWM recovery.
Had used Omega on my SGS II, now using Omega on SGS III since 3.0. Works great for me, no errors whatsoever.
Omega 5.2 is flawless ok but hyper x mod is useless. It creates noise in video recording. No need to use 30mbps bit rate but if in future 60fps recording come true it will be a charm!!
n70shan said:
Omega 5.2 is flawless ok but hyper x mod is useless. It creates noise in video recording. No need to use 30mbps bit rate but if in future 60fps recording come true it will be a charm!!
Click to expand...
Click to collapse
Do you know how to install the stock camera apk?
I downloaded the zip file from Omega files, extracted it,but I cannot install it.
saldawop said:
Do you know how to install the stock camera apk?
I downloaded the zip file from Omega files, extracted it,but I cannot install it.
Click to expand...
Click to collapse
You have to install it with CWM:
1. Reboot to Recovery (CWM-Menu)
2. Select the zip-File
3. Enjoy
Looking at the tutorial video where it shows Omega 3 being installed on a stock rom where it says "no wipe necessary"
Does the same apply to version 6 ? as my rom is stock & rooted, will all my apps/widgets be lost or recoverable with Titanium, this will be my first custom rom and its looking great, thanks for your patience
Shug69 said:
Tried Omega 4.2 and 5.2 briefly. Both times it broke Navigon and the camera hung on me. Don't see any benefit of the Hyperx mod. 5.2 caused my phone to warm up noticably.
Click to expand...
Click to collapse
i am running omega 5.2 and i assure you i dont have the problems you mentioned... did you do a full wipe install or you just flashed it without factory reset?
irishbogman said:
Looking at the tutorial video where it shows Omega 3 being installed on a stock rom where it says "no wipe necessary"
Does the same apply to version 6 ? as my rom is stock & rooted, will all my apps/widgets be lost or recoverable with Titanium, this will be my first custom rom and its looking great, thanks for your patience
Click to expand...
Click to collapse
As per all Omega no wipe necessary . Wipe only if you hit problems .
jje
Hi there. I installed Cyanogenmod 10 ROM to my Vibrant yesterday, and everything seems fine so far excepto for one thing: there seem to be certain apps that i can't install, such as ColorNotes, Angry Birds or even Google Maps. They download fine, but never get to finish installing, this is the message I get: "Unknown error code during installation of the application: "-24" "
Cyanogenmod 10.1 version: 10.1 - 20130118 - NIGHTLY - vibrantmtd
Compilation number: cm_vibrantmtd-userdebug 4.2.1 JOP40D ENG..20130118.042937 test-keys
Kernel: 3.0.54-geedcf0c [email protected] #1
Thanks for your help.
Oh, by the way: how can I change my cellphone name? You know, from SGS-T959 to BADASS or something,
freaket said:
Hi there. I installed Cyanogenmod 10 ROM to my Vibrant yesterday, and everything seems fine so far excepto for one thing: there seem to be certain apps that i can't install, such as ColorNotes, Angry Birds or even Google Maps. They download fine, but never get to finish installing, this is the message I get: "Unknown error code during installation of the application: "-24" "
Cyanogenmod 10.1 version: 10.1 - 20130118 - NIGHTLY - vibrantmtd
Compilation number: cm_vibrantmtd-userdebug 4.2.1 JOP40D ENG..20130118.042937 test-keys
Kernel: 3.0.54-geedcf0c [email protected] #1
Thanks for your help.
Oh, by the way: how can I change my cellphone name? You know, from SGS-T959 to BADASS or something,
Click to expand...
Click to collapse
i have the same problem. did you solve it?
ronisize said:
i have the same problem. did you solve it?
Click to expand...
Click to collapse
Not yet, :C
I posted on CyanogenMod Forums but still nothing.
You guys didnt do a full wipe of system it sounds like!sounds like you did a dirty install to me!IMO wipe system and folllow instructions on installing cm10 they are here to find search the threads and or google your issues you will find info if you look for it.........
K-JACKS said:
You guys didnt do a full wipe of system it sounds like!sounds like you did a dirty install to me!IMO wipe system and folllow instructions on installing cm10 they are here to find search the threads and or google your issues you will find info if you look for it.........
Click to expand...
Click to collapse
I googled and didn't find the same issue anywhere. Also followed the instructions about installing CM10.1, used ClockworkMod to erase data/sys-parts, data cache and Dalvik cache
I'm gonna try again, see what happens
freaket said:
I googled and didn't find the same issue anywhere. Also followed the instructions about installing CM10.1, used ClockworkMod to erase data/sys-parts, data cache and Dalvik cache
I'm gonna try again, see what happens
Click to expand...
Click to collapse
Good Luck! did you try using these tools particualry odin or heimdall? you might also find a youtube video that helps with these as well.I had noproblems using these and have no errors and everything works great on my device however i also am using the official cm.. http://forum.xda-developers.com/showthread.php?t=1982728
Did you I stall 3rd party Gapps or the one from the CM thread?
Sent from my SGH-T959 using Tapatalk 2
Moped_Ryder said:
Did you I stall 3rd party Gapps or the one from the CM thread?
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
! I have no idea if they are 3rd party. This is the file name: gapps-jb-20121212-signed.zip
Would that be the problem?
You need to install Gapps 20121011 JB file Ive found out the hard way that the wrong Gapp file affects the successful install even though they technically shouldn't matter. But nun the less, after trying different gapp files Ive come to know which one runs with the ROM it needs
for example CM10.1 needs the 20121211 gapps file where as CM 10.0 needs 20121011
dseldown said:
You need to install Gapps 20121011 JB file Ive found out the hard way that the wrong Gapp file affects the successful install even though they technically shouldn't matter. But nun the less, after trying different gapp files Ive come to know which one runs with the ROM it needs
for example CM10.1 needs the 20121211 gapps file where as CM 10.0 needs 20121011
Click to expand...
Click to collapse
Oh, I will download it right away! Just to be sure,do I just have to flash the new gapps file, or do I need to uninstall the previous one? In that case, how do I do it? With apps manager like any other app?
Thanks and sorry for being a Noob! xC
dseldown said:
You need to install Gapps 20121011 JB file Ive found out the hard way that the wrong Gapp file affects the successful install even though they technically shouldn't matter. But nun the less, after trying different gapp files Ive come to know which one runs with the ROM it needs
for example CM10.1 needs the 20121211 gapps file where as CM 10.0 needs 20121011
Click to expand...
Click to collapse
It didn't work, :C
I installed gapps-jb- 20121011 and not only it didn't help the problem: I couldn't use any gapp. I'm back to gapps 20121212, will look for another solution, but thanks anyway
Latest Update Of Patched AOSP Based MIUI v4 (4.1.2)
Click to expand...
Click to collapse
................................................................................................................................................................................................................
JELLY BEAN VERSION
INSTALATION GUIDE FOR FIRST TIME
1. Make sure you're rooted and on ICS bootloaders. This ROM is on android 4.1.2
2. Reboot to recovery.
3. Wipe data/Factory Reset
4. Wipe cache
5. Mounts and Storage > Format System
6. Wipe Dalvik Cache
7. Install MIUI ROM
9. Reboot & Personalize Rom as Normal & ENJOY.
NO INSTALING OF OTHER KERNEL
Click to expand...
Click to collapse
INITIAL DOWNLOADS
I777 - MIUI v4 - 3.3.1 - 4.1.zip
ADDONS
1.Gapps - JB - 2012.10.11 - MIUI - i personally dont use this gapps...i download it seprately...
2.I9100 - Language Pack - 3.2.8.zip - I have'nt tested it yet...so plz do a nandroid backup before you install this pack...as per biohazard this should work on I777
3.MIUI V5 - White.mtz - Put the MTZ file in MIUI/Themes and install it via theme manager...
Click to expand...
Click to collapse
................................................................................................................................................................................................................
BUGS & WORKAROUNDS???
TO CHANGE THE DPI - AFTER THE ROM IS SETUP PROPERLY, INSTALL ROM TOOLBOX LITE AND CHANGE THE STRING WHICH SAYS ro.sf.lcd_density
DISABLE THE ANIMATIONS IN DEVELOPERS OPTIONS TO GET SMOTH ROM USAGE
THIS SHOULD BE YOUR PRIMARY ROM. OR YOU MIGHT FACE BOOT LOOPS.
................................................................................................................................................................................................................
ALL THANKS GO TO
IXANZA - For the 4.1 discovery and porting so far.
MIUI - For the I9100 update files.
GERGUTER - For letting us know and use the updates so far.
Faryaab - For the I9100 Rom & Kernel
-BioHaZard- - For the Multi Language Pack
Lord Of Hell - For whatever way you think I helped you
badblood_antony said:
First of All I tried porting the update package to our I777.
But for some DAMN reasons it wont get past the boot screen.
So i decided to port the entire package.
**********************************************************************************************************************************************************************
Follow the Colour Codings Plz -
Green - M sure It Works.
Orange - M not sure. Maybe or Maynot Work.
Red - May god help u.
Installation Guide For first timers :
Make sure you're rooted and on ICS bootloaders. This ROM is on android 4.1.2
Reboot to recovery.
Wipe data/Factory Reset
Wipe cache
Mounts and Storage > Format System
Install MIUI ROM
Install Siyah Kernel
Please, REBOOT, and then flash Gapps.
Do NOT flash them back to back! It will cause Home button not working..!
Reboot Again
DONOT CHANGE THE KERNEL OTHER THAN PROVIDED SIYAH TILL FURTHER INFO. PLZ REPORT ANY ONE WITH ISSUES.
Update Guide :
Download the update file from the link above or from the bottom of this post.
Put it into your SDCard
Reboot to recovery
Install update through recovery
Fix Permissions
Reboot Phone
Note : You must be on the previous version to update to the latest version. EG :Update 3.1.25 requires you to be on 3.1.18
Enjoy. Once again I have just ported the Rom. I found this and I'm just Porting this for you guys.
**********************************************************************************************************************************************************************
Bugs ???
Low Sound Issue - (ISSUE RESOLVED WITH THE LATEST UPDATE)
**********************************************************************************************************************************************************************
All thanks goes to -
IXANZA - for the 4.1 discovery and porting so far.
MIUI - for the I9100 update files.
GERGUTER - for letting us know and use the updates so far.
Ktoonsez - for the awesum kernel.
Myself - for whatever way you think I helped you
**********************************************************************************************************************************************************************
Downloads -
1.
2. Siyah-I777-v7.8.5
3. gapps-jb-20121011_MIUI
Click to expand...
Click to collapse
Looking forward to trying!
:laugh:
Done Uploading...
badblood_antony said:
Done Uploading...
Click to expand...
Click to collapse
Acting a little buggy. Won't boot to lock screen. Sometimes you can get to the home screen but when you push the power button to lock the phone will restart. Just a little heads up.
gerguter said:
Acting a little buggy. Won't boot to lock screen. Sometimes you can get to the home screen but when you push the power button to lock the phone will restart. Just a little heads up.
Click to expand...
Click to collapse
Hmm...didnt encounter this still yet..
badblood_antony said:
Hmm...didnt encounter this still yet...lets work on it....
Click to expand...
Click to collapse
Strike what I said before. I think I may have done a couple of things wrong. I'll get back to ya in a few minutes.
gerguter said:
Acting a little buggy. Won't boot to lock screen. Sometimes you can get to the home screen but when you push the power button to lock the phone will restart. Just a little heads up.
Click to expand...
Click to collapse
gerguter said:
Strike what I said before. I think I may have done a couple of things wrong. I'll get back to ya in a few minutes.
Click to expand...
Click to collapse
OK...try full wipe n install this time no Gapps...cuz i never installed them myself...also this should be your primary rom. as per siyah kernel multiboot dosent work on Samsung JB..
working on the rom for some new modifications like the boot screen and lock screen in the same pack..hope it works..meanwhile uploading the new rom which shows I777
badblood_antony said:
OK...try full wipe n install this time no Gapps...cuz i never installed them myself...also this should be your primary rom. as per siyah kernel multiboot dosent work on Samsung JB..
working on the rom for some new modifications like the boot screen and lock screen in the same pack..hope it works..meanwhile uploading the new rom which shows I777
Click to expand...
Click to collapse
Everything is working good. Just got the order wrong. I was in a hurry! Thanks for the update and looking forward to more releases! I will let you know if I find anything. Again, thanks for your work!
gerguter said:
Everything is working good. Just got the order wrong. I was in a hurry! Thanks for the update and looking forward to more releases! I will let you know if I find anything. Again, thanks for your work!
Click to expand...
Click to collapse
no issues buddy...m just sharing things which help others as u do...lemme know if any bugs comes up...n m working on the updates part..take care..:good:
Great work, I'll definitely try this out! One question, more of a very general MIUI question. One of my favourite things about my current ROM is that I have a unread notification (bubble over the app icon), is there anything like that stock in MIUI or is there some theming required?
EDIT - Install failed, your prop file is funky...
EDIT 2 - I followed the instructions to the letter, and it boots up into the OS then back to boot animation...
Arcen1k said:
Great work, I'll definitely try this out! One question, more of a very general MIUI question. One of my favourite things about my current ROM is that I have a unread notification (bubble over the app icon), is there anything like that stock in MIUI or is there some theming required?
EDIT - Install failed, your prop file is funky...
EDIT 2 - I followed the instructions to the letter, and it boots up into the OS then back to boot animation...
Click to expand...
Click to collapse
Build Prop Issues: This happened to me as well. Install the kernel first and then choose the option to reboot into recovery and install the ROM. That should clear up your build prop issues.
Install: Install the ROM. Boot system. Reboot into recovery after it loads. Wipe cache partition and dalvick cahce. Reinstall kernel. Boot system. Reboot into recovery after it loads. Wipe cache partition and dalvick cache again. Install the gapps package. Boot system and enjoy!
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
Thanks for the reply gerguter...are those steps working ?? It should as I tried those same steps yesterday...it worked for me...couldn't reply as I had a morning shift as per IST...
Also I'll update the same steps in OP if any1 else have got them working...
sent from Hell using SGH-I777
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
Arcen1k said:
Great work, I'll definitely try this out! One question, more of a very general MIUI question. One of my favourite things about my current ROM is that I have a unread notification (bubble over the app icon), is there anything like that stock in MIUI or is there some theming required?
EDIT - Install failed, your prop file is funky...
EDIT 2 - I followed the instructions to the letter, and it boots up into the OS then back to boot animation...
Click to expand...
Click to collapse
Well the only notifications on apps I get is when I install go launcher along with the notification plugin and that too only on msg, calls and gmail...
sent from Hell using SGH-I777
badblood_antony said:
Thanks for the reply gerguter...are those steps working ?? It should as I tried those same steps yesterday...it worked for me...couldn't reply as I had a morning shift as per IST...
Also I'll update the same steps in OP if any1 else have got them working...
sent from Hell using SGH-I777
Click to expand...
Click to collapse
Those are the same steps I used to get everything working yesterday so I think they should work for everybody.
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
gerguter said:
Those are the same steps I used to get everything working yesterday so I think they should work for everybody.
Click to expand...
Click to collapse
Alright I have updated both the steps in the OP...
Let's continue those steps while I upload the modified ROM...should be available in couple of hrs...also I have uploaded the new screenshots of the modified ROM...
sent from Hell using SGH-I777
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
OP updated with link to new ROM build....
badblood_antony said:
OP updated with link to new ROM build....
Click to expand...
Click to collapse
Hold on...OP not getting with the link...
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
badblood_antony said:
Hold on...OP not getting with the link...
Click to expand...
Click to collapse
Uploaded the moded rom and also the latest siyah kernel..lemme know if there is any bugs..
Sent from my SGH-I777 using xda app-developers app
Does not work! Did everything by guide. Phone reboots every time! Crappy firmware! Before you upload - you need to test!
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
ClubOK said:
Does not work! Did everything by guide. Phone reboots every time! Crappy firmware! Before you upload - you need to test!
Click to expand...
Click to collapse
It seems it works for all others specially me and gerguter... also m using the ROM from yesterday...haven't got even single issue...why all issue comes to u man ???
Sent from my SGH-I777 using xda app-developers app
is it possible to install with cwm for xperia x10 mini stock rom ? my phone rooted and cwm installed but due to jtag experience before I just scare to try [ROM] MiniCM7Pro - V21 (For Stock kernel) update!
by the way anyone knows where is suited the gapps for this rom,
thanks in advance
Development sections are for posting something related to development. Ask questions in the dedicated Q&A sections.
tommikks said:
is it possible to install with cwm for xperia x10 mini stock rom ? my phone rooted and cwm installed but due to jtag experience before I just scare to try [ROM] MiniCM7Pro - V21 (For Stock kernel) update!
by the way anyone knows where is suited the gapps for this rom,
thanks in advance
Click to expand...
Click to collapse
First question: No, and 2.1 can't play flash anyway, Google only added support for that from 2.2 onwards
Second question: MiniCM7Pro won't hard-brick your phone to the point that you have to JTAG it again, only changing kernels may do that, but not a different ROM.
Third question: Gapps are included in that ROM, so don't worry about it.
It is a bit sluggish though, but that can be fixed. I can't remember what i did to improve performance but I'll have a look into it.
thank you guys, it works like a charm. I couldn't find the way to install flash player yet but it's gonna be ok, thanks again
tommikks said:
thank you guys, it works like a charm. I couldn't find the way to install flash player yet but it's gonna be ok, thanks again
Click to expand...
Click to collapse
Download these Modules, put them on your sd-card and flash them with cwm, wipe cache afterwards and reboot.
Let me know if it fails or not.
It should speed up the ROM a bit.
I have "always" been using BPouls flash-pack in all later ROMs I have been using.
It includes a plugin for the browser to fullscreen just about any flash content.
Somehow I can't find it anywhere anymore, so here is links:
FlashPlayer.apk (install like any APK, I donøt know what flash version it is, but it works) http://www.mediafire.com/?x0q2zvq1b4ignij
FlashPlayerAddon.zip (install with CWM) http://www.mediafire.com/?8oi6ih5t5cpaiqi
thank you so much guys, under the system/app folder flash player.apk , I solved the problem. Now I can install feedly and watch flash player movies without any trouble. This rom is really great.
HybridRom Concept EditioN
Description:
We all got used to the idea that most stable ROM is a Stock one.
This ROM will prove you otherwise.
Main Futures:
Very fast and responsible ROM based on Z3 aosp concept and GPE libs with amazing battery life and memory management.
Perfect combination of Sony and Google apps.
No bloatware, no adds.
Only 400 megabytes.
Optional modifications.
Installation options:
Feel free to install the rom the way you want it:
Wanna install & forget?
Then LB version without any mods is your choice.
Care about security and want to have nexus like phone?
Then don't install recovery on top of LB version , with encryption your internal storage can be only erased and only using a computer.
Are you advanced user who'd like to experiment with their phone?
Feel free to install mod for theme support and kernel for advanced futures.
You can also convert your phone into a hacking device. (Like in watch dogs game )
Change log:
V2:
Updated Sony and Google apps
Removed:Browser,Google Now,Gmail,Viper,Video(support implemented in Album) and some other bloatware.
Fixed Sony Sound Enhancements
Fixed Write To SD Card (I hope so)
Added new weather widget
Bugs:
Some people might have 5ghz wifi connection problem
In case of the using LB version and Universal Patch, trying to reboot into recovery using advanced power menu will result a bootloop. (System is trying to access a part of kernel which is not available on LB version]. Solution: reboot into flash mode and back.
Wifi may disconnect during screen off no matter the settings. (This is android problem, not my rom)
Installation Instruction:
Make sure that your Bootloader is Unlocked.
Boot in TWRP.
Wipe system,data,and both caches.
Flash the ROM.
FOR LB USERS ONLY: Flash this kernel on top. (Thank @scrubber for that one )
Then (optional,but not recommended) flash recovery for locked bootloder from here
Reboot device.
Prepare to be amazed.
DOWNLOAD
Credits:
@Jozinek for Z3 AOSP Concept
@ATMOSF3AR Z Ultra PSD
XDA:DevDB Information
HybridRom Concept EditioN, ROM for the Sony Xperia Z Ultra
Contributors
Uncle Lucifer
ROM OS Version: 5.1.x Lollipop
Based On: Z3 AOSP Concept, Stock and GPE
Version Information
Status: Stable
Created 2015-09-19
Last Updated 2016-07-21
Mods,Fixes and Kernels
Universal Path
Advanced Power Menu ( Thanks @xpirt ! )
Fixes navigation bar
Disables signature check
Adds support for dark themes using Layers.
P.S. If you want MultiDPI, save original SystemUI file.
If you forgot it, then get it from this post.
How to install:
Install only after first boot, otherwise you will end up in bootloop.
Flash in TWRP
Wipe both caches
Enjoy
DOWNLOAD
Advanced kernel V2.5
Fixed faux sound (hopefully).
All the stuff from NetHunter(Ext. Wi-Fi drivers with injection support, usb hid and cd-rom drivers)
Disabled Swype2Sleep
DOWNLOAD
Advanced Kernel V2
All Stuff from previous kernel
Injected multirom + multirom recovery
RIC Disabled
SELinux Permissive
SSD + Ext4 Optimization
DOWNLOAD
For multirom you may also need this
Advanced Kernel
Faux Sound Control with Fixed PowerAmp
DT2W
Swype2Sleep
DOWNLOAD
SOURCES
Display Color Calibration
DOWNLOAD
FAQ:
Things you need to know:
Before reporting bug reports make sure that you use this rom without any mods such as Xposed
"App XXX crashes" posts won't help me to understand the problem, learn how to use logcat.
Don't ask for ETA
Before asking something, make sure it wasn't asked before
If you ignore my rules - I will ignore you
Q: Will Xposed work?
A: Yes, but install on your own risk, don't complain if battery life will become worse.
Q: Are themes supported?
A: RRO Layers are. Use Layers Manager + LPThemer(Xposed)
Q: Option "double tap to wake" in settings is not working
A: It's kernel related,so this option won't make any difference.
Q: Can I use old Hybrid Rom v1.x Kernel?
A: It will work, but deep sleep won't, so you will have a massive battery drain.
Q: Are you going to port Sony futures such as stamina,small apps and etc.
A: No, as this requires to use Sony framework. This rom is different. If you want stock futures - take a look at my other projects.
Q: How to allow 3rd party apps to write to SD card?
A: Use this app, you can remove it after applying the fix.
First,
Will try and report you back. Just one question does theme engine from sony is working or not and does it gpe based or stock sony based. Thanks for you great effort.
pride007.2012 said:
First,
Will try and report you back. Just one question does theme engine from sony is working or not and does it gpe based or stock sony based. Thanks for you great effort.
Click to expand...
Click to collapse
probably theme engine would not work . Its aosp based with limited sony framework to make only essential sony apps work .This was a new bloatware free concept rom from sony itself.
Ahh @Uncle Lucifer waiting for my exams to get over asap to get back to testing this rom
pride007.2012 said:
First,
Will try and report you back. Just one question does theme engine from sony is working or not and does it gpe based or stock sony based. Thanks for you great effort.
Click to expand...
Click to collapse
Nope, it's AOSP Z3 Concept and GPE based.
Clean AOSP Rom with Sony look and Apps.
P.S. If you will have problems with installation, you can try "Modem fix" from GPE thread, as I've heard that ZUltras for Indian market don't like gpe modem.
It have the latest goods from the 1.5UB ROM ? And the camera its from Sony ? How its the battery usage ?
Thanks U for share, this room very small, can have flash add Gapps?
big said:
Thanks U for share, this room very small, can have flash add Gapps?
Click to expand...
Click to collapse
Well it nowhere says that it needs to flash gapps, so no, there's no need
Lukijs said:
Well it nowhere says that it needs to flash gapps, so no, there's no need
Click to expand...
Click to collapse
Because I don't have any .zip of gapps on my sd0 I guess you don't need to flash gapps. And flash instructions says none of gapps needed.
Theres no harm to just boot the rom and see if gapps is there. If its not well then u dont have any google apps in your drawer.
edit: the rom is 450MB big...I'd be surprised to see gapps not included in such big file
edit2: in the description it says "Some Google apps removed, others replaced with stock ones." ...lol gapps is included for sure.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Will try this rom later.
Will It Work Properly On C6802?
happy3777 said:
Will It Work Properly On C6802?
Click to expand...
Click to collapse
Work fine so far on my c6802 with exposed (v74), WiFi work as it should
No modem fix needed (encounter sim card not detected on first boot, but mobile data work just fine :silly
Rom is really smooth. Menus just fly by very smoothly without any skips or lag! No errors or anything. Everything is stable from what I experience.
I am very impressed with your work @Uncle Lucifer
Tried the ROM for a couple of hours. Amazing and smooth. I just wait for more kernel features (OC , governors, hotplugs) like advanced kernel of the OLD HybridROM.
Sent from my Xperia Z Ultra
Godaemon said:
Tried the ROM for a couple of hours. Amazing and smooth. I just wait for more kernel features (OC , governors, hotplugs) like advanced kernel of the OLD HybridROM.
Sent from my Xperia Z Ultra
Click to expand...
Click to collapse
After testing oc and governors for few months I've noticed that more thing you add to kernel, the heavier it gets, and instead of improvements it's getting worse.
The best result are so far is without extra governors and oc.
I mean battery life and performance.
With OC you can get extra 1k in antutu, but I don't think that a really important thing.
Hi !
love the new rom, seem so fast and battery friendly
however i encounter wifi problem seem likely as cm12 custom rom. thats y i never stick with any cm based rom.
on gpe based rom, this bug currently not happening at all.
wifi keep disconnecting after several minutes and cant found any access point, if you try to disable and enable back, its still the same, only reboot will fix this, however wait 10-20 min, wifi will disconnect back, and the bug go on and on.....
i did report to cm12 based thread, about several thread, about 4 months now, the bug still not fix, maybe because it only happen for a few users, so they ignore it. yah, 4month and counting lol.
Uncle, i love your gpe based rom, and this current rom as well, i hope it did well and great as same as previous rom.
im coming from your gpe based rom, however already did full reset.
maybe i need to stick back to your previous rom.
curiouso9 said:
Hi !
love the new rom, seem so fast and battery friendly
however i encounter wifi problem seem likely as cm12 custom rom. thats y i never stick with any cm based rom.
on gpe based rom, this bug currently not happening at all.
wifi keep disconnecting after several minutes and cant found any access point, if you try to disable and enable back, its still the same, only reboot will fix this, however wait 10-20 min, wifi will disconnect back, and the bug go on and on.....
i did report to cm12 based thread, about several thread, about 4 months now, the bug still not fix, maybe because it only happen for a few users, so they ignore it. yah, 4month and counting lol.
Uncle, i love your gpe based rom, and this current rom as well, i hope it did well and great as same as previous rom.
im coming from your gpe based rom, however already did full reset.
maybe i need to stick back to your previous rom.
Click to expand...
Click to collapse
Well, I didn't touch hardware related stuff and I never had this problem.
I mean that wifi should work as on gpe port, as hardware related stuff is still from gpe.
Tey to change wifi-frequency band in settings.
curiouso9 said:
Hi !
love the new rom, seem so fast and battery friendly
however i encounter wifi problem seem likely as cm12 custom rom. thats y i never stick with any cm based rom.
on gpe based rom, this bug currently not happening at all.
wifi keep disconnecting after several minutes and cant found any access point, if you try to disable and enable back, its still the same, only reboot will fix this, however wait 10-20 min, wifi will disconnect back, and the bug go on and on.....
i did report to cm12 based thread, about several thread, about 4 months now, the bug still not fix, maybe because it only happen for a few users, so they ignore it. yah, 4month and counting lol.
Uncle, i love your gpe based rom, and this current rom as well, i hope it did well and great as same as previous rom.
im coming from your gpe based rom, however already did full reset.
maybe i need to stick back to your previous rom.
Click to expand...
Click to collapse
I guess you see this problem, because you have two xperia phones with custom roms. And your phones have same mac address. When you use your phones in same wireless network your wifi will be dropped. Try to change your mac address...
Sent from my C6833 using Tapatalk
I have problem with adaptive brighitness, it work but..it dont work good. it stay to dark when i am on sun. do i need to flash something more for it to work fine or? on [V1.5]HybridRom worked perfect but here not so much.
DarkSandmaN said:
I have problem with adaptive brighitness, it work but..it dont work good. it stay to dark when i am on sun. do i need to flash something more for it to work fine or? on [V1.5]HybridRom worked perfect but here not so much.
Click to expand...
Click to collapse
It's just less aggressive therefore it's more battery friendly.
And the minimum level is less, so it's don't burn eyes in darkness.
I personally like it more.