[q] 4010X - how to copy ROM image from a different phone - Android Q&A, Help & Troubleshooting

hello
I need suggestion from you guys.
I s*crewed up my rooted Alcatel 4010X with rua1 CWM installed ; its bricked now and I cannot install a new zip neither back up a custom ROM.
I cannot flash using SP tool either , I tried and tried and I am totally stuck.
The only option I have is to recover the ROM copy from another working phone with the same network and make and model , but is it possible to do that without rooting the other person phone, i.e but just swapping the SD cards and taking a backup.
Please someone could comment, I do not want to root the "working phone", my friend will not allow me !
Thanks

Related

[Q] new here...need help

hi guys.. I recently rooted my phone using z4root and was able to root it. what I would need help on is how to backup the settings of my phone (optimus one). the kind of backup where if something goes wrong I can just load my backup settings to start over.
Also, I installed rom manager and it requires me to flash clockworkMod recovery. when I do that it asks me to confirm my phone model but my phone model isn't on the list to choose from.
And once that's taken care of could someone help me flash custom roms.. TY
I'm new to all this, so please bear with me. ^^
DON'T USE ROM manager (clockworkMod)! It will brick your phone! http://forum.xda-developers.com/showpost.php?p=9549856
Just follows steps for custom recovery This will load right manager for you!

[q] [root] n9330

Hi guys i'm new on this forum, i hope that this is the right section.
I've N9330 with firmware e1901 v77 gq2002tc, the same of this guidehttp://forum.xda-developers.com/showthread.php?t=1966593&page=39
I cannot post directly on the guide because i've not 10 message, so i create this topic.
My troubleshooting starts when i decide to root my smartphone. I followed the guide but it not works properly for me. I've extracted scatter file with MTKdroidtool and then i use this scatter with the rom of Brunoand i put this in cellphone with Spflashtool, the programs says OK.
But when i try to start recovery mode comes only a white screen.
So i've tried with binary tool but it not works so i don't have superuser (for the program it's all ok), then i tried special mode of this tool (it is for tablet i've read), and when my android restart it was a semi resetted, i cannot install apps that i have also before the reset only newer apps. I cannot reset my phone with recovery(it no works) and with restore by settings (it not works).
So i tryed to put with flashtool original recovery of the link. IT NOT WORKS. aaa i'm going crazy
I have made before change recovery a backup but i don't know where is it on sd. What can i do????:laugh:
Sorry for my bad english
The backup is in .backup and it is only of user data. Now if someone give me help or his recovery image..
I want only wipe all data or install su. Please help without my Android i'm lost:crying:
Si there a way to wipe without recovery nor settings?
Finally i ve found my stock ROM. I can flash it with spflashtool bit i m scared if brick my phone. I want only chance recovery. I ve re ad that multi port is good for this. Here si the rom http ://
getwapi.com/ search/go.php? type=all&q=e1901 without space
It is possible that nobody have this problemi? This is only topic on e1901_v77_gq2002tc in english
am having the same kind of problem with same kind of device , i fail to get the rom you posted
help plz

[Help] Install ROM

Hello guys, i'm new on the world of Android and i need a little help. I'm newbie but i learn fast.
I got a new phone with android 4.4.2 China honor 3 (fake), after uninstalling some China app the operation system started to stuck at logo at the start.
So to solve the problem i red that i could restore the old OS using ROM file. The factory where i bought the phone sent me the official ROM file for my phone.
Now i entered on Recovery mode, first i did "wipe data/factory reset", then with ADB i loaded the file .zip "adb sideload update.zip". But how the file is uploaded it says "Installation aborted", without any error.
So now i need your help how can i restore this system... I tried also to buy an SD card 8 gb and upload the file on the SD, but same error.
Thank you for your help!
Bump! Need help guys
SUMMARY:
I unistalled wrongly MIUI (MiHome app) and the phone stopped working correctly.
Phone is a fake honor 3c with MTK 65xx processor.
1 - Phone doesnt load the main theme, after the android logo i see a black page. (i see the top bar where there are wifi, time etc)
2 - The phone is not rooted. (i think)
3 - I can enter in Restore Mode and Factory Mode.
4 - I got the official ROM file. (the factory gave me it)
5 - All file zip (that i try to use in recovery from SD or ADB) give me "Installation aborted" without any error.
6 - I haven't USB DEBUG enabled, and i can't enable it cause i can't load the Operation system.
Stuck on BootLoop
I am currently facing the same Issue i changed the system/framework (of the CHERRY MOBILE JELLY) with the folder of the SamsungS5 system/framework
cause I was thinking that it'll worked too after changing the system/media of my phone
PLEASE HELP
GUYS
Download and flash the stock ROM with SP flash tools....to will solve all the problems...
the best place to go for any rom for china phones is needrom just google it. I had a jiake v8 phone and this was the only place where i was able to find rom for my phone. good luck ....
I face the same prob!
I have a canvas 2.2 a114 which I bought a few days back . I had been using it very smoothly(not rooted and is new). But suddenly it started to reboot and was stuck at the canvas logo. I have the rom file, but it simply says "Installaton aborted when I load the zip file. help plz! Thanx.
guys the best way to do this is to go to youtube. Find how to port rom to mtk devices or china phones there are plenty of videos. It will be much easier for you to do something when you see how someone is doing it and then you do it for yourself. I have a jiake v8 pphone and this is what i did is not that easy to explain much easier to see.
you can try reflashing the stock rom (You May not lose data) or you can install the stock recovery
Fixed
BrendanWk said:
you can try reflashing the stock rom (You May not lose data) or you can install the stock recovery
Click to expand...
Click to collapse
I was fed up at last and i sent it off to micromax center. They said it was a software prob.
---------- Post added at 09:55 AM ---------- Previous post was at 09:47 AM ----------
Guys I finally figured out (I am new to the android family) that i should install a custom recoery inorder to flash roms. I cant flash roms in stock recovery.

[Q] Help required. Cant Root MTK6589 chinese device after failed partition resize.

Hello All,
First the device specs.
Device: QMobile A900 MTK6589 dual sim chinese device.
ROM: 4GB
OS: LG G3 Kitkat 4.4.2 rom.
Now the Problem
I am also facing this problem after attempting to re-size the partition using meteos mtk6589 rom edit apk and then did clear eMMC / Factory Reset using stock recovery (i think it formatted /data partition etc) .... Although my phone is still working properly without any issue, i am unable to root or install CWM by any means (tried mtk mobileuncle tools, tried spflash tool) but not working.
First, i tried to root using RootMaster vRoot, motochopper run.bat but failed. It did however installed SuperSU but when i start it says binary needs to be updated. I continue but it fails to update. I used RootChecker app to check the possible root but it says device is not rooted. I searched xda-forums and googled for a solution but couldnt find any. One person stated using Format whole flash to reset the partition table but i haven't done that worrying my phone will brick.
Secondly, i tried flashing cwm recovery using spflash tool (with new scatter file generated with MTKDroidTools). After flashing, it says All OK and shows green circle, however, when i reboot in to recovery, i get stock recovery and no CMW.
Please help me how to root my device and install cwm as i am unable to revert to my old backup taken with cwmr.
Regards.
Please some one ???
Anybody care to help pl? :banghead:
Still waiting for xda experts replies ....
Have a look at this thread to enhance the app storage to an acceptable limit in A900. I was also thinking of Meteos App first , then tried the procedure in the link below :
http://www.incpak.com/tech/qmobile-a900-increase-apps-storage/
Thanks.

[Q] telling me no USIM card installed after trying install TWRP on unrooted device!

Recently I tried to install DN4 on my note 2(youtube link /watch?v=ua4jIAoK7Lc)
and during the process I had to install this TWRP thing and here is the mistake I made, I installed TWRP when my note 2 was not rooted...
After installing TWRP on unrooted note 2, obviously it didn't install anything and what's worse, my phone won't recognise the sim card anymore!
Hoping that upgrading to DN4 in right order will fix the problem I managed to root then install TWRP then install DN4 successfully. However, still telling me no USIM card installed.......
Now, after using root browser to check the efs/ imei folder, there is one file in there called mps_code.dat
I have also added few screenshots from efs folder...
I sincerely need somone can help and I look forward to your responds very much...
Many thanks!

Categories

Resources