Hello i'm teamgelletik and i'm new here. Sorry for my bad english.
Since I installed the GAPPS from Android 4.4 KitKat on my HUAWEI G615/U9508, I now have some problems on my device:
- My home button doesn't work anymore.
- My keybord doesn't work anymore.
- I don't have a lockscreen anymore
I have already reset my device in 3 ways but I still retains the GAPPS/problems. I hope you guys can help me.
teamgelletik,
teamgelletik said:
Hello i'm teamgelletik and i'm new here. Sorry for my bad english.
Since I installed the GAPPS from Android 4.4 KitKat on my HUAWEI G615/U9508, I now have some problems on my device:
- My home button doesn't work anymore.
- My keybord doesn't work anymore.
- I don't have a lockscreen anymore
I have already reset my device in 3 ways but I still retains the GAPPS/problems. I hope you guys can help me.
teamgelletik,
Click to expand...
Click to collapse
you should try flashing stock Rom of your device!
Reinstall rom.
did you only install those selected apps or is the rest of your phone also on android 4.4 level?
Do you have Google Search 3.1.8? I believe that is the version you need to get the Google Experience Launcher to work, and that may be the source of your issue.
Related
Hi. I have Huawei u8220 ( T-Mobile Pulse) and CyanogenMod Plus Pulse v0.9 on it. The rom works well but i can not install the market and vibrations not working
I tryed to reinstall the rom but nothing changes. Also tryed CM AIOV4 , V5 ,V6 and cm-7.1.0-RC1-U8220 and i have the same problem on all roms. Please help me..
Thanks a lot
kokiatanasovski said:
Hi. I have Huawei u8220 ( T-Mobile Pulse) and CyanogenMod Plus Pulse v0.9 on it. The rom works well but i can not install the market and vibrations not working
I tryed to reinstall the rom but nothing changes. Also tryed CM AIOV4 , V5 ,V6 and cm-7.1.0-RC1-U8220 and i have the same problem on all roms. Please help me..
Thanks a lot
Click to expand...
Click to collapse
Hi,
in case someone still uses a Huawei 8120/8220 flash FzF ROM - I use it since 3 years and it still gives a decent (while compared to 2015 models slow) device!
Hello,
All is in the subject.
In fact I can install it but when I get into the rom I have :
- no Google Play.
- Only Holo launcher and another are available.
I'have proceeded like this:
- From MROM I have 'reboot' in CMW recovery (version 5.0.2.0).
- Then I have flashed the ROM. "No tweak and with full wipe"
As explained , I have fixed the permissions.
- Then I have installed 'Blueslep'
and finally I have installed "Options Chooser": - all launcher - all apps - Adobe Flash.
Tell me If I have done something wrong because I don't understand where I have missed something .......
Thank you for your help.
I have now installed the Gapps For JB 4.1.2 ... and it won't work too ...
The purposes of this question are :
- Why my Atrix won't installed the complete ROM + Apps ...?
- Is the fact to have not all the features provided with the ROM can be an issue for the ROM usage and/or stability ? (I mean does my ROM will no be so efficient than for another user who has successfully installed everything) ?
- If I have missed something, can you please help me ...
I've tested JB and I go back to MROM ... but since 2 days I want to go back to JB as the interface and the speed is something I don't want to lose ...
Thx
Scarymover
scarymover said:
Hello,
All is in the subject.
In fact I can install it but when I get into the rom I have :
- no Google Play.
- Only Holo launcher and another are available.
....
Scarymover
Click to expand...
Click to collapse
+1
I have the same problem, Google Play can't be installed under any circumstances with the given packs from this thread on my device.
Since the Paranoid rom is the only fast rom with kind of lapdock support, it would really awesome get this one working...
Greez, djexsv
djexsv said:
+1
I have the same problem, Google Play can't be installed under any circumstances with the given packs from this thread on my device.
Since the Paranoid rom is the only fast rom with kind of lapdock support, it would really awesome get this one working...
Greez, djexsv
Click to expand...
Click to collapse
Same problem here.
the problem seems inherent to aroma installer since a few days, i advised someone to install epinters gapps and he said it worked.
However, he did have to do a clean install in order to get it to work.
So perhaps you should just flash your system partition, reinstall the rom and then flash epinters gapps, you can find these on his website
Thread Moved to Original Development.....
http://forum.xda-developers.com/showthread.php?p=48535961#post48535961
Larga vida al p500!!
Wait for a stable build like 4.2 or in dremas 4.0.4
Enviado desde mi Nexus 4 mediante Tapatalk
you must have recovery in this thread to flash:
http://forum.xda-developers.com/showthread.php?p=48367371#post48367371
Hey Hephappy!
Why did you leave XDA? We need you!
Your ROMs were first of the kind for our device. Moreover, good developers are leaving development of this device because they have moved on to another device.
Optimus One users want good ROMs too!
Hephappy left xda but still actively working on P500
rhar**** said:
Hey Hephappy!
Why did you leave XDA? We need you!
Your ROMs were first of the kind for our device. Moreover, good developers are leaving development of this device because they have moved on to another device.
Optimus One users want good ROMs too!
Click to expand...
Click to collapse
I don't know why he left but he is still working on P500 and all his works will be available for us.
LG-P501 said:
I don't know why he left but he is still working on P500 and all his works will be available for us.
Click to expand...
Click to collapse
Thank god he didn't leave dev. Hats off to you
Feedback - [DEV][ROM][4.4.2] [CM11] KITKAT for LG-P500[WIP][VER-1]
I've been using this KITKAT Rom (from 27. December) for 5 days now and I'm really impressed of it - thx goes to mukulsoni and hephappy.
My feedback here, since I'm not allowed to post on a dev thread:
- Battery backup is acceptable with 2 days for me (Wifi off, Location off, low usage)
- Installed Calendar from PlayStore and calendar syncronization is working
- If you do not want to use Hangeout as you default sms client you can install 8sms from the PlayStore instead (which I did)
- Not Working:
- Wifi Tethering (@mukulsoni please add to not working list)
- voice search does not work for me (maybe someone else knows how to get it working?)
- overall performance (smartassV2, 240-710) is good but not snappy (I'm using a class 10 8GB sdcard).
Conclusion:
@all who are interested in KITKAT on our old P500, give the linked ROM a try - you won't be disappointed.
androidck said:
I've been using this KITKAT Rom (from 27. December) for 5 days now and I'm really impressed of it - thx goes to mukulsoni and hephappy.
My feedback here, since I'm not allowed to post on a dev thread:
- Battery backup is acceptable with 2 days for me (Wifi off, Location off, low usage)
- Installed Calendar from PlayStore and calendar syncronization is working
- If you do not want to use Hangeout as you default sms client you can install 8sms from the PlayStore instead (which I did)
- Not Working:
- Wifi Tethering (@mukulsoni please add to not working list)
- voice search does not work for me (maybe someone else knows how to get it working?)
- overall performance (smartassV2, 240-710) is good but not snappy (I'm using a class 10 8GB sdcard).
Conclusion:
@all who are interested in KITKAT on our old P500, give the linked ROM a try - you won't be disappointed.
Click to expand...
Click to collapse
Did not like the Dec 27 build.
I am running the Omni preview which is more or less cm-11. Favorably impressed.
Offline voice search will not work on our armv6 device. Thanks Google.
Online voice does work. Use voice dictation or swype/dragon to get it into google search. Must tap search, but ...
Actually, something before getting the voice is what armv6 stops. I cannot reproduce how I got there, but I had it actually, init, take my voice and get results!! Once, just once. So ... who knows?
Dovidhalevi said:
Did not like the Dec 27 build.
I am running the Omni preview which is more or less cm-11. Favorably impressed.
Offline voice search will not work on our armv6 device. Thanks Google.
Online voice does work. Use voice dictation or swype/dragon to get it into google search. Must tap search, but ...
Actually, something before getting the voice is what armv6 stops. I cannot reproduce how I got there, but I had it actually, init, take my voice and get results!! Once, just once. So ... who knows?
Click to expand...
Click to collapse
So it seems that online voice search is not working for now.
Why do you prefer the Omni preview? Could you please give some more details?
androidck said:
So it seems that online voice search is not working for now.
Why do you prefer the Omni preview? Could you please give some more details?
Click to expand...
Click to collapse
I took this because this is what is being developed right now, where fixes are going.
On-line voice does work. Go to settings->language&input->voice recognition. Since you are likely running with Google Search around, you will see two (count 'em) google options here. Choose the other one.
If you only see one, you need to install the old VoiceSearch.
Feedback - [DEV][ROM][4.4.2] [CM11] KITKAT for LG-P500[WIP][VER-3]
Changes between Ver1 and Ver3 I encountered
- battery consumption seems to be improved a little bit
- stock SMS/MMS app included now (no need for Hangout or 8sms)
- "national roaming" support seems to be gone now (new MVNO Settins are unclear for me - any hints are welcome)
- camera problems
- autofocus does not work anymore - focus does not go green (worked on Ver1)
- choosing HDR option leeds to FC of camera app (to disable HDR you have to clean App Settings)
Trying to record a video freezed the phone (gave me an FC on Ver1) - had to remove the battery.
Experiences from other users are welcome.
Ver6-New:
I am not able to install this version oder version 5 - status 7 error (some symlinks missing)
New Experimental released Jan 14, 2014
A new experimental build has been released at Jenkins.cm_p500-userdebug-cm-11.0:victory:
can not install Ver6-New - symlinks missing
I am not able to install this version over version 5 - status 7 error (some symlinks missing)
Has anybody a clue? I already downloaded this version twice.
I had no problems installing the old Ver6 before. Unfortunately I've deleted the old Ver6 ;-(.
androidck said:
I am not able to install this version over version 5 - status 7 error (some symlinks missing)
Has anybody a clue? I already downloaded this version twice.
I had no problems installing the old Ver6 before. Unfortunately I've deleted the old Ver6 ;-(.
Click to expand...
Click to collapse
Wrong thread.
Dovidhalevi said:
Wrong thread.
Click to expand...
Click to collapse
I am not allowed to post in dev thread, so please be lenient towards me.
Back to my update problem: I already checked md5 hash and in Addition I repartioned and formatted my sdcard, formatted system and tried to flash via recovery (ver from 16th january) - but same error.
Is it possible that system of this rom is almost full and that some memory blocks of my system storage is dead? It is just an assumption or guess, but if too few memory could cause such an upgrade failure, which apps are secure to remove?
Once again, thx for any hints.
androidck said:
I am not allowed to post in dev thread, so please be lenient towards me.
Back to my update problem: I already checked md5 hash and in Addition I repartioned and formatted my sdcard, formatted system and tried to flash via recovery (ver from 16th january) - but same error.
Is it possible that system of this rom is almost full and that some memory blocks of my system storage is dead? It is just an assumption or guess, but if too few memory could cause such an upgrade failure, which apps are secure to remove?
Once again, thx for any hints.
Click to expand...
Click to collapse
Ok, now try flashing any older cm 10.1 or 10.2 over the new recovery (jan16) and let me know the status. You can write on my thread after completing your 10th post.
mukulsoni said:
Ok, now try flashing any older cm 10.1 or 10.2 over the new recovery (jan16) and let me know the status. You can write on my thread after completing your 10th post.
Click to expand...
Click to collapse
I already installed version 5 which didn't cause any problems. But I will try an older cm version in addition. I'll post the result afterwards.
@mukulsoni: I installed 10.1.6 (hephappy) without any problems.
Could you please provide the old Version6 rom again. I want to install this version until there is a (I find) a solution for my specific problem.
Thanks in advance.
androidck said:
@mukulsoni: I installed 10.1.6 (hephappy) without any problems.
Could you please provide the old Version6 rom again. I want to install this version until there is a (I find) a solution for my specific problem.
Thanks in advance.
Click to expand...
Click to collapse
Strange, you are able to install version 5 but not 6! anyways here is the version 6 old link but install it over version 5 only. http://forum.xda-developers.com/showpost.php?p=49845686&postcount=482
mukulsoni said:
Strange, you are able to install version 5 but not 6! anyways here is the version 6 old link but install it over version 5 only. http://forum.xda-developers.com/showpost.php?p=49845686&postcount=482
Click to expand...
Click to collapse
Thank you for the link. I flashed that version 6 over version 5 sucessfully. As you said, it is really strange that i can not install the 6-new version. But for now I am happy with it. If you are able to find any possible explaination I am still curious to know of course.
Hello, I have a rooted xperia mini pro SK17i and I'm stuck to the CyanogenMod ROM 7.2.0 which seems to be the only one to work with my device.
I have written to you in the past to ask: "Why the wifi stops working if I try to install the cm-9.0.0, or 9.1.0-cm, or 10 cm-.........? ?? "
but no one has ever found a solution or the solution just did not work ...
I know from what I see in the forums that mine is a very common problem.
Now, years later, I ask again the same thing: "What should I do to install a more recent rom without losing the wifi?"
hello
frenksisco said:
Hello, I have a rooted xperia mini pro SK17i and I'm stuck to the CyanogenMod ROM 7.2.0 which seems to be the only one to work with my device.
I have written to you in the past to ask: "Why the wifi stops working if I try to install the cm-9.0.0, or 9.1.0-cm, or 10 cm-.........? ?? "
but no one has ever found a solution or the solution just did not work ...
I know from what I see in the forums that mine is a very common problem.
Now, years later, I ask again the same thing: "What should I do to install a more recent rom without losing the wifi?"
hello
Click to expand...
Click to collapse
wifi is defend by your kernel install.. try use another kernel like cm10 or cm11 and make full wipe n install your rom again.. or switch to another kernel and rom..
When I installed the cm-9.0.0 I used its kernel and I did the same with the 9.1 and the 10 ... did not work ..
But maybe I did not understand. You say, for example, if I install the 9.1 should I try Kernell of 10? Does it make sense?
Please........ :crying:
Does WiFi work on Stock ICS 0.587 firmware ?
I am ashamed but I do not know what it is ...
I'm no expert, I have not yet figured out a lot of things ... I'm still learning ...
I followed a guide to root my device and install the cyanogen rom.
If I look in the device info read:
Kernel: 2.6.32.9-FXP root @ ubuntu # 6
Android version: 2.3.7
This is all I know ...
Before roottare the phone I upgraded the original operating system of the phone and the wifi stopped working.
Precisely for this reason I decided to install the CyanogenMod ROM: to try to recover the wifi.
The cm 7.2.0 did it. The newer versions like 9, 9.1 did not work ....
My question is .... why??? it is obvious that it is not a hardware problem ...Because if it were so it would not work even with cm 7.2.0 ...
I'd like to update my device to the latest stable CyanogenMod rom for my device which is 9.1 ..
But I can not because the wifi stops working ... Heeeeelp!!
frenksisco said:
I am ashamed but I do not know what it is ...
I'm no expert, I have not yet figured out a lot of things ... I'm still learning ...
I followed a guide to root my device and install the cyanogen rom.
If I look in the device info read:
Kernel: 2.6.32.9-FXP root @ ubuntu # 6
Android version: 2.3.7
This is all I know ...
Before roottare the phone I upgraded the original operating system of the phone and the wifi stopped working.
Precisely for this reason I decided to install the CyanogenMod ROM: to try to recover the wifi.
The cm 7.2.0 did it. The newer versions like 9, 9.1 did not work ....
My question is .... why??? it is obvious that it is not a hardware problem ...Because if it were so it would not work even with cm 7.2.0 ...
I'd like to update my device to the latest stable CyanogenMod rom for my device which is 9.1 ..
But I can not because the wifi stops working ... Heeeeelp!!
Click to expand...
Click to collapse
i think you ALLWAYS forget to flah the needed kernel. (& allways have this old GB kernel) so only wifi works with this.
you should make sure you following the install EXACTLY.
also cm 9.1 is old like hell. this is also no stable release. at least i wouldnt call it like that.
Look for LX (Legacy xperia) which provides cm10.1 , 10.1 (jb) & 11 (kitkat) this is far more stable. also many bugs fixed there.
cm 9(.1) is abdonned long time
First of all .. Thank you so much for your help.
Ok .. I'll try .. I'm just worried because in thr LegacyXperia site I see a lot of bugs in the Working / not working lists..
frenksisco said:
First of all .. Thank you so much for your help.
Ok .. I'll try .. I'm just worried because in thr LegacyXperia site I see a lot of bugs in the Working / not working lists..
Click to expand...
Click to collapse
ok good luck this time all works incl. wifi (should work 100% if doing all right)
i think the best is to test a rom 1st so you can say how it fits your usage . just a few tips:
-use minimal gapps after flashing rom
-LX 10.1 has a release candidatefrom march this year its a pretty stable daily driver. dont use the 10.2 release theres nothing better..
-maybe also you can test cm11 if want, but keep in mind 19/3 is the last PMEM build which is based on old kernel, will probably deliver the stablest experience. IMO the latest release is also very good but this contains some bug like the ANDROID_OS wakeclock (need power on phone on charger to avoid this) & its still in development (so its more for dev users)
for the buglist:
CM10.1:
- maps flickering its true but fixed in CM11
- wifi gets drops sometimes .. but it work at all
- camera is not good quality/buggy bcuz of driver lacks (also no 720p video)
CM11:
- sometimes wifi a lil bit buggy but its minimal. works like a charm for me
- 720p video is working here
BOTH:
-sometimes bluetooth battery drain after using it (need reboot to fix) i not face this is issue when i send something to friend.... (works normal..)
- NO FM radio, HDMI port will not work (if you have one) & ANT+ (no drivers)
good luck for you
Yesterday I installed the CM11 and ... it works!!!!
The wifi works! :good:and I like the rom.:good::good: ... so ... thanks a lot bejunk!!!! thanks thanks a lot!!!!! You are a great!!
frenksisco said:
Yesterday I installed the CM11 and ... it works!!!!
The wifi works! :good:and I like the rom.:good::good: ... so ... thanks a lot bejunk!!!! thanks thanks a lot!!!!! You are a great!!
Click to expand...
Click to collapse
np bro im happy you have now good rom & working wifi
just 1 thing if you use the latest version (02/07) it has a bug that you get android os battery drain. you can solve this by:
-power off phone
-plug in into charger & wait till you see the battery logo
-power on . done
Thanks again! The only problems with this rom are:
- the phone takes a long time to boot. Almost two minutes ... every time ..
- When the device starts up many icons disappear and others are in different positions ... I do not know why ...
Is there a way to fix these problems? Maybe I did something wrong during the installation ...
frenksisco said:
Thanks again! The only problems with this rom are:
- the phone takes a long time to boot. Almost two minutes ... every time ..
- When the device starts up many icons disappear and others are in different positions ... I do not know why ...
Is there a way to fix these problems? Maybe I did something wrong during the installation ...
Click to expand...
Click to collapse
There's a Q&A section for that ROM. Anyway, long boot time should be fixed in the upcoming release. The simplest way to fix disappearing icons problem is to install another launcher. Hope I've helped.
Hello everyone !
I read this post because i love the Miui v8 UI, but i have a problem with this.
I tryed alls versions of this rom from de S7 EDGE EXYNOS forum ( beta1 , final beta and the others based on stock samsung rom) and,
When i want to make a call, i hear nothing and my interlocutor hear nothing too.
I tryed a lot csc in the aroma installer, many full wipe, reinstallation...
I do not know what to do
I have reinstalled the stock nougat rom waiting a solution.
Google play not work too. I followed all of the instructions for the Force closed problem, and when its ok, the google play app don't want to update or download any applications. I have tryed many error code tutorials for resolves this ( error 963, 927 ) and nothing .
Please help me ! thank you in advance and sorry for my bad english ^^
EDIT : i use TWRP 3.0 flashed with Odin.
EDIT 2 : Helpers : @MigoMujahid
fredericID said:
Hello everyone !
I read this post because i love the Miui v8 UI, but i have a problem with this.
I tryed alls versions of this rom from de S7 EDGE EXYNOS forum ( beta1 , final beta and the others based on stock samsung rom) and,
When i want to make a call, i hear nothing and my interlocutor hear nothing too.
I tryed a lot csc in the aroma installer, many full wipe, reinstallation...
I do not know what to do
I have reinstalled the stock nougat rom waiting a solution.
Google play not work too. I followed all of the instructions for the Force closed problem, and when its ok, the google play app don't want to update or download any applications. I have tryed many error code tutorials for resolves this ( error 963, 927 ) and nothing .
Please help me ! thank you in advance and sorry for my bad english ^^
EDIT : i use TWRP 3.0 flashed with Odin.
Click to expand...
Click to collapse
It's simply a MIUI 8 rom issue, it should be listed in the rom bugs in the thread.
Thank you
Thank you for your quick answer. You think to its was resolved in next version ? I was afraid to be single with this issue.
fredericID said:
Thank you for your quick answer. You think to its was resolved in next version ? I was afraid to be single with this issue.
Click to expand...
Click to collapse
If the rom is still being updated, and newer versions will come, then it should be fixed in next updates, and you said it works in stock nogut, then it's definitely a rom issue.
PS: you should QUOTE my post or mention me in your post by adding @MigoMujahid in your post so that i can get some notification that you posted.
Ok.
Sorry but, the Miui's roms are based on Marshmallow, not Nougat...
Its the stock rom official from samsung installed after for waiting a solution for miui . Sorry for the not good explaination ^^"
fredericID said:
Ok.
Sorry but, the Miui's roms are based on Marshmallow, not Nougat...
Its the stock rom official from samsung installed after for waiting a solution for miui . Sorry for the not good explaination ^^"
Click to expand...
Click to collapse
No i understand you well
I meant if it's working in stock nogut, then it's a MIUI 8 rom issue.
Everything it's ok for me now !
Before, my installation of twrp and miui, was from marshmallow stock samsung. And, with this way, i have so many errors.
But, with twrp installed on the Nougat stock rom, i don't have any problem, calls working, google apps working too !
resolved for me