Hello everyone,
I have a problem with my Neo V and it's very unusual. I will tell my whole day which this issue happened.
I was using a Custom ROM and I don't remember which one I was using. Anyway, one day I couldn't open Settings and I didn't care that much and continued using it that way. When I think that I will be mad at my phone, I made up my mind changing my ROM to PAC-ROM (JB). But in order to change to PAC-ROM, I had to unlock my bootloader. To open bootloader in official way, I type *#*#73...... thing to get the service menu. But nothing happened after I tried it 5-6 times. Maybe it was about ROM or that setting issue. I dont know. I had a backup which was made when I had the stock rom with superuser. So I restore and I could open service menu. It was saying that I could do the unlocking. Then I unlocked bootloader.
Okay, here is the when all started.
Before I tried to install PAC-ROM, i tried another one which was JB again. But I forgot to change the Kernel as well... And when I tried to install the rom, I had an error. That was when I think to install PAC-ROM. I tried that too and I had the same error! Then I realized that I didn't install a JB kernel which I had to. I had a stock ICS kernel. I found a kernel and plug my phone as a mass storage in CWM my computer froze. And then when I tried to unplug my phone from my PC my phone froze too! You know, I wiped everything to install new ROM, but when my CWM closed, I had to install Neo V's Stock Rom and then root, install CWM and a new ROM. But today I figured out that my battery doesn't drain, until my battery is %0. It says it's %0 and then my phone close. I wrote down my whole day in order to get your help guys. I searched but couldn't find a thing about my problem. Oh and there is one more thing. I installed a programme which shows your battery stats and things. The programme says the same as my phone about "battery %" but it gives the temperature and it changes when I used wifi or mobile data. What this problem can be and how can I solve this.
Thanks for your help.
Okey I solved the problem by wiping the battery stats.
Related
Ok I hate starting a new thread but I have a problem that I can not seem to find any information on it,
I have had my S2 for 1.5 years and have run many many custom roms. Been using Paranoid lately. Today I tried flashing the newest Wanam Lite as my second rom keeping Paranoid as primary. (using dorimanx kernel)
Wanam failed to install. After boot the screen goes black. No problem... I will just go back to my Primary rom. Tried, Tested and True, Paranoid Android.
What's this? My phone is asking for SIM unlock code. I unlocked this phone 1 and a half years ago. Ok so I unlock it the same way i had done in the past for my S2 and many friends S2. I installed "Galaxy S Unlock" from the market and ran it. Ok phone is unlocked and I can use it like normal, as I have network signal.
But as soon as I reboot it is locked again. So now I have to unlock the SIM every time I reboot my phone.
Does anyone know why this is happening?
This is what I have tried so far.
- reinstalled ROM
- wiped dalvic
- wiped data
- wiped cache
- fixed permissions
Nothing I try solves the problem. Every time I reboot I lose my sim unlock.
Any help is appreciated.
Thanks.
anyone have any insight into this??
has this happened to anyone else?
kevjef420 said:
Ok I hate starting a new thread but I have a problem that I can not seem to find any information on it,
I have had my S2 for 1.5 years and have run many many custom roms. Been using Paranoid lately. Today I tried flashing the newest Wanam Lite as my second rom keeping Paranoid as primary. (using dorimanx kernel)
Wanam failed to install. After boot the screen goes black. No problem... I will just go back to my Primary rom. Tried, Tested and True, Paranoid Android.
What's this? My phone is asking for SIM unlock code. I unlocked this phone 1 and a half years ago. Ok so I unlock it the same way i had done in the past for my S2 and many friends S2. I installed "Galaxy S Unlock" from the market and ran it. Ok phone is unlocked and I can use it like normal, as I have network signal.
But as soon as I reboot it is locked again. So now I have to unlock the SIM every time I reboot my phone.
Does anyone know why this is happening?
This is what I have tried so far.
- reinstalled ROM
- wiped dalvic
- wiped data
- wiped cache
- fixed permissions
Nothing I try solves the problem. Every time I reboot I lose my sim unlock.
Any help is appreciated.
Thanks.
Click to expand...
Click to collapse
First of all , use the following to unlock your phone, if it works for you that would be gud otherwise flash the rom again (Fresh Install)
https://dl.dropbox.com/u/21618136/GalaxSimUnlock.apk
You cannot dual boot Leaked JB based roms as of yet ..
Exatley same things happend with me at this afternoon. My sgs 2 was unlocked nearly a year ago, and I'v been tryed a new "leaked - out" rom which I've found on the Sammobile forum. I9100XXLSJ - Offical, beta... or alpha.. dunno, but 4.1.2
Few minutes later I also tried an another rom... http://forum.xda-developers.com/showthread.php?t=2037363 XXLSJ tweeked by Alliance.
I've wiped everything before every install, and I'm not sure where I've lost my "unlocked" status... Lol.. First time I was thinking its a PIN code only. Obviously I never seen this before. In the last few year I installed, and tried many roms without any issue. Mostly Darky's, CM 7-9.
But long story short: your tool solved my problem under a minute. Thank you so much MR.Killer
Ps: maybe I also tried a CM10 nighty build today.. I cant bear in my mind everything
jstonehun said:
Exatley same things happend with me at this afternoon. My sgs 2 was unlocked nearly a year ago, and I'v been tryed a new "leaked - out" rom which I've found on the Sammobile forum. I9100XXLSJ - Offical, beta... or alpha.. dunno, but 4.1.2
Few minutes later I also tried an another rom... http://forum.xda-developers.com/showthread.php?t=2037363 XXLSJ tweeked by Alliance.
I've wiped everything before every install, and I'm not sure where I've lost my "unlocked" status... Lol.. First time I was thinking its a PIN code only. Obviously I never seen this before. In the last few year I installed, and tried many roms without any issue. Mostly Darky's, CM 7-9.
But long story short: your tool solved my problem under a minute. Thank you so much MR.Killer
Ps: maybe I also tried a CM10 nighty build today.. I cant bear in my mind everything
Click to expand...
Click to collapse
Glad i helped and you never clicked the thanks button
Please CLICK THANKS IF I HELP
Mr.KiLLeR said:
First of all , use the following to unlock your phone, if it works for you that would be gud otherwise flash the rom again (Fresh Install)
https://dl.dropbox.com/u/21618136/GalaxSimUnlock.apk
You cannot dual boot Leaked JB based roms as of yet ..
Click to expand...
Click to collapse
THANK YOU VERY MUCH. This app solved my problem with the sim unlock. Saw it on the market but it wanted me to pay
I didn't know that the leaked JB could not be dual booted. That would explain the black screen. I think I will back up my primary to SD and try installing that rom again. Does this work on any kernel or just the one it is supplied with?
Anyways. Thanks again. You solved my BIG problem.
kevjef420 said:
THANK YOU VERY MUCH. This app solved my problem with the sim unlock. Saw it on the market but it wanted me to pay
I didn't know that the leaked JB could not be dual booted. That would explain the black screen. I think I will back up my primary to SD and try installing that rom again. Does this work on any kernel or just the one it is supplied with?
Anyways. Thanks again. You solved my BIG problem.
Click to expand...
Click to collapse
only 'Philz' kernel does support the leaked Jb rom or one based on it for know
The app is free to use if you get it from Spockys thread.
I believe you have to pay if you get it through play store.
Hi guys,
I wonder if someone can help me with this... really annoying problem!
I was checking out various roms i downloaded here, started with 4.0 aokp which was great, then gave cyanogen 4.2 a try, but then i wanted to go back to Aokp 4.0 cause it seemed to run faster
Now first thing, i couldnt get rid of cyanogen (no offense intended) cause when i wiped all data, cache and dalvik it just took aokp a few seconds to install from CWM recov, that doesnt seem right, right?
Then installed GAPPS, but still it ran on Cyanogen
So, i did a NANDROID backup, which made my phone like before i started with all this..
THIS IS WHERE IT WENT WRONG?
now it just wont read my simcard
i tried my sim in my old phone and that works fine, so the problem is in my phone somehow
is it something about the radio settings specific to my phone and network?
how can i change these settings and are they specific for my provider?
you guys always helped me out so i hope you know what i mean..
kipdeontdekker said:
Hi guys,
I wonder if someone can help me with this... really annoying problem!
I was checking out various roms i downloaded here, started with 4.0 aokp which was great, then gave cyanogen 4.2 a try, but then i wanted to go back to Aokp 4.0 cause it seemed to run faster
Now first thing, i couldnt get rid of cyanogen (no offense intended) cause when i wiped all data, cache and dalvik it just took aokp a few seconds to install from CWM recov, that doesnt seem right, right?
Then installed GAPPS, but still it ran on Cyanogen
So, i did a NANDROID backup, which made my phone like before i started with all this..
THIS IS WHERE IT WENT WRONG?
now it just wont read my simcard
i tried my sim in my old phone and that works fine, so the problem is in my phone somehow
is it something about the radio settings specific to my phone and network?
how can i change these settings and are they specific for my provider?
you guys always helped me out so i hope you know what i mean..
Click to expand...
Click to collapse
I've exactly the same problem.
Are your wifi and BT still OK ?
Is your IMEI (*#06#) still the same as under the battery ?
Was your phone locked ? Did you buy it with a SIM ?
My problem appeared after flashing several different modems/RILS : I got no error warning anywhere, but after reboot, I completely lost my netwerk connection. (no voice calls , no mobile data)
At first I thought a bad RIL driver, so I restored my Nandroid backup from the day before (after wipe cache/wipe dalvik/format system), but still no connection with the netwerk. and can't even make voice calls.
Then I was in panic !
After this I did a complete factory reset, and wiped/formatted cache/dalvik/system/data/SD-card and went in to download mode. After loading a stock ELLA for my region using Odin, still no connection. I was also never asked to enter the PIN-code for my SIM to unlock it.
Damned, this is an embarrassing situation : I can't think of loosing my SG3 for several weeks if I have to send it to Samsung !!
Mu phone is bought without SIM, so it's not SIM-locked.
My Wifi and BT are still OK, my IMEI is also still OK.
Any other ideas, please ?
How do I come in the service mode for the Radio ?
This is the way my netwerk is indicated : a circle with a stripe, much like the famous traffic sign.
Its fixed
So i have no idea how it eventually got fixed but if someone else has this problem, heres what i did:
Full wipe/factory reset blablabla all that
Did Nandroid restore again, put the AOKP ROM and GAPPS back on my phone
Installed ROM which was I9300CEDLI1
Used Odin to install latest CWM, which was already on there, but still
Then booted into CWM and installed .zip of course
This still went suspiciously fast since the very first time it took way longer, that worried me but,
Installed GAPPS again,
Rebooted... IT ASKED FOR MY PIN NUMBER!! hell yes that was what i wanted!
So now it again sees my simcard in there, so now i can make calls end use intnet again!
Still i think it started after the nandroid backup for some reason, or it may have been because of wiping Dalvik Cache?
I have no idea if that even makes sense
kipdeontdekker said:
Its fixed
So i have no idea how it eventually got fixed but if someone else has this problem, heres what i did:
Full wipe/factory reset blablabla all that
Did Nandroid restore again, put the AOKP ROM and GAPPS back on my phone
Installed ROM which was I9300CEDLI1
Used Odin to install latest CWM, which was already on there, but still
Then booted into CWM and installed .zip of course
This still went suspiciously fast since the very first time it took way longer, that worried me but,
Installed GAPPS again,
Rebooted... IT ASKED FOR MY PIN NUMBER!! hell yes that was what i wanted!
So now it again sees my simcard in there, so now i can make calls end use intnet again!
Still i think it started after the nandroid backup for some reason, or it may have been because of wiping Dalvik Cache?
I have no idea if that even makes sense
Click to expand...
Click to collapse
Good to hear your problem is fixed !
I'm still not able to make voice calls or enable mobile data : "insert SIM card" is the message I get.
I did already twice a full reset/factory restore and flash a stock ROM using PC Odin, but no avail.
Today I did a restore from my EFS folder using a backup that a had made before the problem appeared, but no avail.
BTW, did you also have the same indication from network status as on my screen-shot ?
Any idea what else I can try ?
I'm getting desperate .....
I'm having the same trouble after doing backup in TWRP when boot up it doesn't recognize the sim card.
I've flash CM10.1 and it only work after i remove the card e put it back on.
Try to see if it something about the simcard.
Regards,
Rui
Hi,
I have been using variiety of ROMs from 2 years on S2 i9100. Problem started with MIUI. Sleep of Death that used to be cured only with reboots. Then i changed the Kernel to "speedmod-kernel-s2-jb-k5-7-CWM.zip " and problem began.
I started getting Status 7 errors when i tried to update MIUI to newer version. I deleted asserts from Updater-Script and installed new version. Also, changed kernel to "Siyah-s2-v6.0b5-CWM".
But today, i opened MyTracks app and phone rebooted.
Since then, i would restart my phone. The phone will reach the "Media Scanning" stage and would then shut down (not SOD).
I restored my NANDROID backup but phone again shut down just after booting up --- right when "Media Scanning" icon appeared at top.
STRANGER -- when i tried to reboot phone after disconnecting phone won't start --- and doesn't go in recovery.
BUT when is being charged using charger phone is able to get into recovery.. and is able to reach and then shutdown at Media Scanning stage.
I made a mistake of flashing Official Firmware (from Sammobile) using ODIN from PC. Now, i do not have CWM recovery.
My phone behaving same even after flashing :-
1. Two different ROMs (Jellybam 7.8 and MIUI 3.7.5
2. Two different Kernels (Siyah-s2-v6.0b5-CWM and speedmod-kernel-s2-jb-k5-7-CWM)
3. Official Firmware Jellybean 4.1.2 using ODIN.
Now,
1. i can't go into recovery without charger
2. phone won't reboot normally without charger
3. shutsdown at media scanner, when rebooted after connecting charger
4. no NANDROID backup working -- same problem as above
5. Kernel changing did not help
6. Flashing ROM did not help --- MOSTLY switches off during installation process
7. ODIN-Flashing-Official Firmware has made me stuck with official-recovery (going to try deleting the asserts statement to see if installation succeeds without status7error)
Need expert help. Can anybody please help me out.
I won't mind paying for your efforts, too.
Please help.
Thanks.
Try new battery? Power problem.
shall try first thing in the morning
andrewwright said:
Try new battery? Power problem.
Click to expand...
Click to collapse
Have not tried new battery. Will buy a new one in the morning and see if that works.
Any other suggestions?
Thanks..
andrewwright said:
Try new battery? Power problem.
Click to expand...
Click to collapse
However, the battery is charged 100% and i am able to enter StockRecovery and browse. It fails only during installation of ROMs / Recoveries/ Kernels.
Run rom nuke and kernel nuke scripts from hawerkpaul then reflash rom+gapps see if that does it. So cwm works ok? with out charger connection? If so try the nuke scripts. Also try super wipe by biftor.
Edit your on stock recovery now or cwm? Dont run scripts in stock get cwm bk on ohone then flash nuke scripts. Or redownload stock firmware and reflash with odin. Then flash philz kernel that will bring bk cwm.
Solved
Hi Friends!
It was a battery problem.
:crying: sad i wiped my emmc before checking battery.
Thanks for support guys.
Nuke Scripts are new for me. Shall explore that area, might be helpful in future.
Thanks again.
Rom Nuke scripts will clean up your system ready for flash. Same as kernel Nuke scripts. I don't use them much. I format system,data,cache,preload if its 4.1.2 and then flash Roms. Always works ok with out problems. Only time iv used kernel nuke is to get of Apollo kernel. Glad you sorted your problem out. :thumbup:
Before continuing reading, please keep in mind that the problem I am asking support for was already solved for my own. What I want to know is how did it happen. For prevention, you know.
It all started when I flashed the Black Box ROM 2.0.2 (http://forum.xda-developers.com/showthread.php?t=1834915) It flashed normally, without any problem. But, since it lacked the Xposed Framework, I installed it manually, downloading from its thread, and choosing a full install. Using the Framework I downloaded Gravity Box and the Youtube Adaway, before downloading Youtube. Since the modules needed a reboot to work, I rebooted. And this is when the bad things started to happen.
The ROM did not start. It went through the BlackBox logo, but when it appeared that the SIM unlock was going to pop up, then the phone turned off. This happened many times. So I decided to do a full wipe and install another ROM. The problem was that the phone didn´t allowed me to access the recovery.
I was using the PhilZ Touch 6, but when I pressed Volume up+Menu+Power it did not work. The only thing that worked was the Odin Menu, and I got stuck at it, I couldn´t get out the Odin Menu. So, seeing that the phone wasnt going to work anyways, I flashed a 4.3 stock ROM through Odin.
As I suspected, the ROM got stuck at boot, and got a bootloop. So then I flashed another recovery, and flashed good ol´ CWM. And It worked..for a while. The phone would shut down after some seconds. So then I tried to flash TWRP, but it lasted about one second and then the phone shut down again.
Since I was using Odin 3.03, I downloaded Odin 3-04 Moded Edition, from the Modem thread, and then reflashed CWM. In this time, it worked without failing, and I could do a full wipe and flashing an old Cyanogenmod 4.2.2 ROM, finally solving the problem. The day after I flashed Ultima ROM and at the moment it goes fine, without any problem. Which is weird, because it too uses Gravity Box and Xposed Modules. I even installed new modules, rebooted the phone and it works fine, without any problem.
What I want for the people here is that someone explains to me what happened, because the BlackBox ROM looked gorgeous and I wanted to give it a long try. And because I spent an entire night solving that problem, and well, I wont sleep in peace until I get to know what happened to that bastard
r1k1v1 said:
Before continuing reading, please keep in mind that the problem I am asking support for was already solved for my own. What I want to know is how did it happen. For prevention, you know.
It all started when I flashed the Black Box ROM 2.0.2 (http://forum.xda-developers.com/showthread.php?t=1834915) It flashed normally, without any problem. But, since it lacked the Xposed Framework, I installed it manually, downloading from its thread, and choosing a full install. Using the Framework I downloaded Gravity Box and the Youtube Adaway, before downloading Youtube. Since the modules needed a reboot to work, I rebooted. And this is when the bad things started to happen.
The ROM did not start. It went through the BlackBox logo, but when it appeared that the SIM unlock was going to pop up, then the phone turned off. This happened many times. So I decided to do a full wipe and install another ROM. The problem was that the phone didn´t allowed me to access the recovery.
I was using the PhilZ Touch 6, but when I pressed Volume up+Menu+Power it did not work. The only thing that worked was the Odin Menu, and I got stuck at it, I couldn´t get out the Odin Menu. So, seeing that the phone wasnt going to work anyways, I flashed a 4.3 stock ROM through Odin.
As I suspected, the ROM got stuck at boot, and got a bootloop. So then I flashed another recovery, and flashed good ol´ CWM. And It worked..for a while. The phone would shut down after some seconds. So then I tried to flash TWRP, but it lasted about one second and then the phone shut down again.
Since I was using Odin 3.03, I downloaded Odin 3-04 Moded Edition, from the Modem thread, and then reflashed CWM. In this time, it worked without failing, and I could do a full wipe and flashing an old Cyanogenmod 4.2.2 ROM, finally solving the problem. The day after I flashed Ultima ROM and at the moment it goes fine, without any problem. Which is weird, because it too uses Gravity Box and Xposed Modules. I even installed new modules, rebooted the phone and it works fine, without any problem.
What I want for the people here is that someone explains to me what happened, because the BlackBox ROM looked gorgeous and I wanted to give it a long try. And because I spent an entire night solving that problem, and well, I wont sleep in peace until I get to know what happened to that bastard
Click to expand...
Click to collapse
OK first black box already has xposed in ROM control settings.. so maybe because you manually installed it it may have caused conflicts... Don't know why you got a recovery bootloop... but maybe due to same problems... And I am also using blackbox 2.1 and so far it is fantastic...
Sent from my GT-I9300 using xda app-developers app
Partition structure on these phones is very fragile, one bad shutdown can corrupt one or more partitions at the same time. I'd suggest the combination of mods applied caused the kernel panic, while data was being written.
Subsequent events read like normal solution to corruption, it shouldn't happen again but best to apply framework mods one at a time.
Sent from my GT-I9300 using Tapatalk
kunal1540 said:
OK first black box already has xposed in ROM control settings.. so maybe because you manually installed it it may have caused conflicts... Don't know why you got a recovery bootloop... but maybe due to same problems... And I am also using blackbox 2.1 and so far it is fantastic...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hmm, I don´t remember that the BlackBox 2.0.2 had any Framework...thats why I did a manual installation. But I will try the new version 2.1. Hopefully the problems may have been solved.
boomboomer said:
Partition structure on these phones is very fragile, one bad shutdown can corrupt one or more partitions at the same time. I'd suggest the combination of mods applied caused the kernel panic, while data was being written.
Subsequent events read like normal solution to corruption, it shouldn't happen again but best to apply framework mods one at a time.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Interesting. So I have to apply mods one by one? Or can I add multiple mods because corruption has already been solved?
On a side note, when I boot the phone the red exclamation mark that used to appear has disappeared. Does that means that I somewhat reseted the flash counter to 0?
I'm so lost and confused over this since yesterday...
so 2 days ago my phone started lagging and hanging and freezing until i realized i have got this issue with data encryption
i have a rooted sony z2 with TWRP Custom recovery
first i didn't know it was with data encryption failure so i literally factory reset and installed all my apps and data again and again!!!
On both rooted and non rooted rom ....
after every time my phone started to lag !!
after one whole day of trying everything i finally realized its actually with the data encryption and i should change my ex4 to something else... so here again i wiped the phone and changed to ex3 and installed and all my data and apps all over again
but after a couple hours...same problem again.....
im literally so tired of not knowing what to do ! my head hurts so much due this ugh....
Please help me get rid of this issue thanks ...!
Hey, i would flash the full stock rom without root and twrp and look. I think it is a problem with the twrp recovery.
On my V30 with Oreo we should flash a zip that disable data encryption after some modification in Recovery.
Just try for a week the full stock rom.
Nemeziz 56th said:
Hey, i would flash the full stock rom without root and twrp and look. I think it is a problem with the twrp recovery.
On my V30 with Oreo we should flash a zip that disable data encryption after some modification in Recovery.
Just try for a week the full stock rom.
Click to expand...
Click to collapse
Well i have already tried using the stock ROM without any root or recovery !!
and its still the same
however im not sure whats the zip file u r talking about and where i can get it for my Sony z2 D6502...
By the way i just thought it might be another reason that my device is lagging so much after installing like 30/40 apps.
i have overclocked my CPU with root and even after flashing the stock rom i feel like CPU settings hasn't been reset? is it possible?
its always on end MAX and less Min value on both stock/pre root rom my CPU gets very hot on TWRP specially, its more than 70Celcious so i thought maybe its a hardware issue and my CPU is overheating bcuz its old or something... and i should prolly change my CPU ?
i really don't understand whats wrong with my phone and im so confused about what to do
I had here a Z1 and Z2 both was my previous phones.
I didnt experienced such problems except i backup or restore anything in TWRP.
My questions for you are:
On which Version are you now?
What do you done exactly before the problem starts?
Get a Monitor App from Playstore and look what cause this high load. Or you take a look in the Developers Option for this.
We got here a not tasty problem, maybe you backup your whole data and reset all to stock and don't install any apps, after a while installing step by step your apps.
Nemeziz 56th said:
I had here a Z1 and Z2 both was my previous phones.
I didnt experienced such problems except i backup or restore anything in TWRP.
My questions for you are:
On which Version are you now?
What do you done exactly before the problem starts?
Get a Monitor App from Playstore and look what cause this high load. Or you take a look in the Developers Option for this.
We got here a not tasty problem, maybe you backup your whole data and reset all to stock and don't install any apps, after a while installing step by step your apps.
Click to expand...
Click to collapse
I dont think if its even about TWRP because i even installed the stock rom with Flashtool and started installing my apps one by one and after a couple hrs device started lagging and freezing and odd how Wifi gets soooo slow ! (like everything gets slow in it) and also when i reboot the phone it oddly takes long time on boot menu to load .
im not sure if i did anything to cause it tbh...
it just happened on a normal day...
it gets soooo slow and leaves no other way for me but factory reset option...
i have the latest rom 23.5.A.1.291
the only time i can get it temporary fixed is when i backup the rom on TWRP and factory reset the Rom and Restore it back!
and everything is working fast and fine again only for like 6 or less hours...
and while data is restoring TWRP shows the CPU Temp on +80C !! Is this normal?
Btw i have a unlocked bootloader.
do u have any idea what i should do?
Yes i do! You need a structure by fixing a problem, my plan is:
You must explorer the problem why your phone get so laggy.
Perform a factory reset and use your phone for 1 Day with this stock setup. (Dont restore your old apps or data)
Look often into the Task Manager to show what cause the cpu load.
Nemeziz 56th said:
Yes i do! You need a structure by fixing a problem, my plan is:
You must explorer the problem why your phone get so laggy.
Perform a factory reset and use your phone for 1 Day with this stock setup. (Dont restore your old apps or data)
Look often into the Task Manager to show what cause the cpu load.
Click to expand...
Click to collapse
man i kinda feel like its my CPU that is messsed up and idk why
cpu usage doesnt show any app, no app is taking more than 1%.
i think ,my system is overclocking...
and if it is how can i reset or stop it smh?