I was trying to switch my phone over to CWM from TWRP. I tried flashing using ROM manager but it was always rewritten. I decided to grab the .img file from the CWM site and flash it in terminal emulator like I had done with TWRP before. It seemed to flash but when i rebooted I got the message that the system software was not authorized. I thought the file I downloaded was loki but I guess not. Do I have to odin back to stock now or is there another method?
So I just realized it was being stupid and was stuck trying to boot recovery. I booted to download mode and selected cancel to force it out of this loop. Once it did this I was able to boot the system and restore a proper recovery.
On a side note, does anyone know why flashing CWM doesn't stick. I read some things about the recovery being flashed every boot but all the information was out dated, I couldn't find anything about the S4.
thecaptain0220 said:
On a side note, does anyone know why flashing CWM doesn't stick. I read some things about the recovery being flashed every boot but all the information was out dated, I couldn't find anything about the S4.
Click to expand...
Click to collapse
ROM manager does work...try flashing then reboot at least once before booting recovery...and if you are running a stock tw rom some will attemt to overwrite custom recovery...in newer cwm it will ask you if you want to disable recovery install...clicking yes will stop the process keeping custom cwm
Related
Hi,
Due to HTC's special touches, the recovery image doesnt stay flashed, and on normal boot its flashed over (meaning if i try to go to recovery after a normal boot, i get the red triangle stuff, and have to pull the battery). I was wondering if this would potentially cause troubles if i was trying to flash a custom ROM from recovery? in other notes, i do find sometimes i have to pull the battery 4 or 5 times to get it to normally boot (thats without holding the buttons >.>).
Thanks in advance.
HTC HERO recovery image flashing problems
I am having exactly the same problem!
I did a quite a bit of research on how to root, backup and flash my HERO and every guide I found describes the process using Universal AndRoot + Rom Manager and it seems there should be no problems. I already rooted my phone successfully, installed Rom Manager and flashed either ClockworkMod 2.5.0.1 or RA Recovery 1.7.0.1 which are able to boot but only once. The next time I reboot I get the red triangle warning and it loads into stock recovery (by pressing vol_up + powroff buttons), so the custom recovery lasts only one boot cycle. I was able to backup but I don't want to risk to wipe and flash since there is a chance it might stuck in the bootscreen loop afterwards and I won't be able to do anything.
There is a thing with s-off and SPrecovery which helps to resolve the problem but it doesn't look like there is anything for HERO.
Any help would be appreciated.
ps I tried to manually flash recovery from inside the phone and from windows command line with the same result.
forum.cyanogenmod.com/topic/8182-how-to-root-your-hero
posted some similar comments over there, and the only init script that i can find when in recovery.
Yeah I posted my question there too.
I was able to find some information about the issue (he is talking about Villain ROM but I think it doesn't really matter):
pulser_g2:
Repeat the process again, as I think stock ROMs try and overwrite the recovery each time they boot. When you finish the process, immediately nandroid and flash VR12. That will then flash a new recovery, AmonRA 1.6.2a, and you will be sorted
Click to expand...
Click to collapse
So it looks like we should just go ahead and flash a custom rom which, in theory, will eliminate the problem.
yeah was tempted to just flash, but sending duck my system img for him to dissect anyway.
yeah worked fine, running cm6.1 now
Yeah once you root you have to flash a custom rom before reboot or u loose the root
I learnt it after lots of reboots and re roots.
but now I wanted to know if I could save the original rom which i have as nand backup to make as an update.zip like custom rom for safe keepimg
I flashed CM6.1 -based TastyFroyo 1.2 and I can confirm custom recovery stays flashed now.
I have a rooted GT 10.1 LTE with the EH04 update. I have tried flashing via CWM which results in the obvious breakage. I have also tried installing via Recovery and Odin with the attached files and in various combinations with no luck.
Any suggestions or ideas on what I am mucking up to not be able to get CWM only my tablet?
To note: It was working prior to the EH04 update.
Bump.
Any ideas?
try the cwm here:
http://forum.xda-developers.com/showthread.php?t=1090289
to a certain degree it is a lot of trial and error as to what parts of the various 10.1 models are common and which are distinct -- at this juncture what is to loose from flashing a different cwm?
Try this recovery ( flash zip)
http://www.mediafire.com/?w45j8i0fcj0wck0
Then try this rom
http://forum.xda-developers.com/showthread.php?t=1277045
Its been working very well for me.
Mr.Jester said:
I have a rooted GT 10.1 LTE with the EH04 update. I have tried flashing via CWM which results in the obvious breakage. I have also tried installing via Recovery and Odin with the attached files and in various combinations with no luck.
Any suggestions or ideas on what I am mucking up to not be able to get CWM only my tablet?
To note: It was working prior to the EH04 update.
Click to expand...
Click to collapse
I unrooted to get the EH04 updated using this: http://rootzwiki.com/topic/7718-romleakodineg01-factory-stock-odin-image-vzw-lte-tab-101/ , waited for the EH04 update, then re-rooted using this (which I used to root initially): http://rootzwiki.com/topic/2242-root-recovery-galaxy-tab-101-lte/ .
Perhaps you should unroot per the above, take the update, then re-root as above--worked for me.
i ota'd EH04, lost root. downloaded kernel.zip, applied it, got root back, installed cwmod, clicked to reboot into recovery and it's looping since, i can't do anything but get into ODIN but the PC wont recognize it, although i get a pop up saying android.. installed, adb devices doesn't pick up either. can't get into recovery.
---
update
http://forum.xda-developers.com/showpost.php?p=18121666&postcount=53
someone warned in the forums and i didn't read it before i did it, used odin to put recovery.zip, now i'm back in action.
The recovery you provided is the same that I attached. What I discovered however is that if I booted into recovery right after installing the CWM recovery, CWM would load. If I booted into stock EH04 then back into recovery, the stock recovery would load. It seems as if the ROM was restoring stock recovery when it loaded. After installing Lightspeed, CWM recovery stayed in place.
Either way, thank you for the assistance. I hope this thread ends up helping someone else.
My steps to install Lightspeed from Stock ROM EH04:
1. reboot recovery, install either recovery.zips above.
2. When the system automatically reboots, hold volume up to boot into recovery again. This time it should be CWM.
3. Wipe cache and factory reset
4. Install Lightspeed ROM
I
Mr.Jester said:
The recovery you provided is the same that I attached. What I discovered however is that if I booted into recovery right after installing the CWM recovery, CWM would load. If I booted into stock EH04 then back into recovery, the stock recovery would load. It seems as if the ROM was restoring stock recovery when it loaded. After installing Lightspeed, CWM recovery stayed in place.
Either way, thank you for the assistance. I hope this thread ends up helping someone else.
My steps to install Lightspeed from Stock ROM EH04:
1. reboot recovery, install either recovery.zips above.
2. When the system automatically reboots, hold volume up to boot into recovery again. This time it should be CWM.
3. Wipe cache and factory reset
4. Install Lightspeed ROM
Click to expand...
Click to collapse
Thank you. Everytime I tried flashing cwm recovery, I would always end up back at stock recovery. Your fix worked perfect.
I followed this guide here to root my EVO 3D:
http://forum.xda-developers.com/showthread.php?t=1239821
Then my friend who already had a rooted Galaxy S told me to get ROM Manager and it installed Clockwork Recovery. I didn't know you only needed one recovery since I'm noob at this and when I tried to install a Custom ROM with Clockwork, it just boots and I get the Sprint logo and nothing happens. I try to boot into TWRP and nothing also happens. I think having two recoverys is going a major issue with my phone and I'm unable to install any roms. Is there anyway to go back to just having the TWRP Recovery and get rid of the ClockWork/ROM Manager? Or will I have to reset everything and root again?
Huh... Sounds like the hboot 1.5 is giving you issues... Use image GUI app for 1.5 to flash right from normal android mode( everyday user mode) look the thread in themes and apps to get it installed. Let me know how it goes here. No link as I'm using the tapa app
Shot from my shooter in 3D
injected with cleanrom2.7
r2thek said:
I followed this guide here to root my EVO 3D:
http://forum.xda-developers.com/showthread.php?t=1239821
Then my friend who already had a rooted Galaxy S told me to get ROM Manager and it installed Clockwork Recovery. I didn't know you only needed one recovery since I'm noob at this and when I tried to install a Custom ROM with Clockwork, it just boots and I get the Sprint logo and nothing happens. I try to boot into TWRP and nothing also happens. I think having two recoverys is going a major issue with my phone and I'm unable to install any roms. Is there anyway to go back to just having the TWRP Recovery and get rid of the ClockWork/ROM Manager? Or will I have to reset everything and root again?
Click to expand...
Click to collapse
You can't have 2 recoveries installed at the same time...if you initially had TWRP, when you flashed clockwork it would've over-written TWRP. You don't need to reset anything or re-root to get back to TWRP. You should just be able to flash TWRP again. Use the method from the thread you initially followed. Just the part about flashing TWRP is all you need to do. I've never tried it, but you could also try flashing it with the app flash gui image, or something to that nature. Joeykrim developed it and I've heard it works nice, here's where to find info about it, http://forum.xda-developers.com/showthread.php?t=1192527. If your phone won't boot, the flash gui image app prob wouldn't be the best way. I would just boot your phone to fastboot, re-flash TWRP recovery, then flash a rom and try rebooting.
I don't have hboot 1.5, so I'm not up to date on the 'special' ways you need to flash, but I know that you need to boot into recovery from fastboot in order to flash a kernel, and I'm not sure if there's other steps you need to to take in the flashing process, so research that and make sure you're doing it correctly. If you don't boot to recovery from fastboot, the kernel won't flash and you'll be stuck in boot loops or something like that. Good luck.
Thank you guys! The flash image gui thing made the fix very seamless. I just flashed TWRP again and now it's showing up. Flashing synergy nitely now. Woot!
Hey guys -
I'm having trouble getting CWM Recovery to work with my YP-G70. I've rooted, installed ROM Manager, wiped data and partitions, installed Odin, Used Odin to (supposedly) flash the DD_01142012.tar recovery to the device. Everything looks successful, but when booting back up ROM manager only gives me the option to go to "recovery setup" instead of the normal flash option. Even when I reboot it in recovery, it just goes to the standard android recovery screen. Any ideas on how to fix this? It may be painfully obvious, this is my first root.
Hydraulix_93 said:
Hey guys -
I'm having trouble getting CWM Recovery to work with my YP-G70. I've rooted, installed ROM Manager, wiped data and partitions, installed Odin, Used Odin to (supposedly) flash the DD_01142012.tar recovery to the device. Everything looks successful, but when booting back up ROM manager only gives me the option to go to "recovery setup" instead of the normal flash option. Even when I reboot it in recovery, it just goes to the standard android recovery screen. Any ideas on how to fix this? It may be painfully obvious, this is my first root.
Click to expand...
Click to collapse
Rom Manager does not work for this device ( I think ) and you should not use it. "DD_01142012.tar" is not just a recovery, it's the kernel too. They are integrated. Flash it again and hold power and vol-up during boot up to get to recovery then flash your rom...
I have a rooted MDK Verizon S4 with SuperSU installed. I had been trying to use Rom Manager to install clockworkmod recovery and every time, it comes back with the message that it has been successfully installed. When I try to boot into recovery, it wouldn't work. I finally installed GooManager and went ahead and installed TWRP. Now I am able to boot into TWRP with no issues, but when I try to overwrite and install clockworkmod recovery from within Rom Manager, it again comes back with the message that it has been successfully installed, but it still boots into TWRP.
I understand that I can use TWRP to switch over to a different rom, but I am just befuddled as to why I am not able to install clockworkmod. Can you guys please help me understand what I am doing wrong?
the_jaguar said:
I have a rooted MDK Verizon S4 with SuperSU installed. I had been trying to use Rom Manager to install clockworkmod recovery and every time, it comes back with the message that it has been successfully installed. When I try to boot into recovery, it wouldn't work. I finally installed GooManager and went ahead and installed TWRP. Now I am able to boot into TWRP with no issues, but when I try to overwrite and install clockworkmod recovery from within Rom Manager, it again comes back with the message that it has been successfully installed, but it still boots into TWRP.
I understand that I can use TWRP to switch over to a different rom, but I am just befuddled as to why I am not able to install clockworkmod. Can you guys please help me understand what I am doing wrong?
Click to expand...
Click to collapse
You can either ODIN the CWM edition you want (for example Philz Touch Recovery - http://goo.im/devs/philz_touch/CWM_Advanced_Edition/jfltevzw) - get the md5 file of course for ODIN. You can also try to flash the zip file of Philz Touch Recovery from your SDCard (same site - http://goo.im/devs/philz_touch/CWM_Advanced_Edition/jfltevzw) through TWRP. Reboot into recovery and see what happens.
Skeetch79 said:
You can either ODIN the CWM edition you want (for example Philz Touch Recovery - http://goo.im/devs/philz_touch/CWM_Advanced_Edition/jfltevzw) - get the md5 file of course for ODIN. You can also try to flash the zip file of Philz Touch Recovery from your SDCard (same site - http://goo.im/devs/philz_touch/CWM_Advanced_Edition/jfltevzw) through TWRP. Reboot into recovery and see what happens.
Click to expand...
Click to collapse
Thanks. When I was trying to install CWM within Rom Manger, I ended up paying for the touch upgrade, hence my desire to try and install CWM form within Rom Manager... It's just a bit frustrating that I can't figure out what's going on..