Anybody get the 2 December release of CM 10.2 loaded onto their e970 and have WiFi working?
It was a clean, bare install.
jickums said:
Anybody get the 2 December release of CM 10.2 loaded onto their e970 and have WiFi working?
It was a clean, bare install.
Click to expand...
Click to collapse
I had such problem. Looks like you have upgraded from ICS. You need to flash modem from Jely Been and your CM will work like butter.
If you're using CWM that's most likely your problem. I flashed the modem from JB and that didn't even work for me.. However, once I used TWRP instead of CWM it worked. I hope this helps! And thanks to the guy who originally brought that up! :good:
Strange.. I was using CWM to flash JB modem and after that had no problems with wifi.
What could solve
dredik said:
strange.. I was using cwm to flash jb modem and after that had no problems with wifi.
Click to expand...
Click to collapse
what could solve
EASY fix
jickums said:
Anybody get the 2 December release of CM 10.2 loaded onto their e970 and have WiFi working?
It was a clean, bare install.
Click to expand...
Click to collapse
Quick and easy fix :
Download : downloads.codefi.re/g33k3r/cwm-ATTJB-Radio.zip
reboot into Recovery.
install this zip from where ever you put it on your phone.
Reboot system, Wifi works.
cyanogenmon 10.2 e970 wifi dot not work
bigjohnman said:
Quick and easy fix :
Download : downloads.codefi.re/g33k3r/cwm-ATTJB-Radio.zip
reboot into Recovery.
install this zip from where ever you put it on your phone.
Reboot system, Wifi works.
Click to expand...
Click to collapse
i have twrp 2.4.3. i install this solution but still does not work. please help me.
I'm having this same problem, only mine will work for a while, then it craters my wifi so that it doesn't work for laptops or anything. The wifi turns to normal after I disable it on my phone. I have tried all of the above solutions with the same result. What can I do? I don't really know how to go about troubleshooting wifi in Cyanogenmod.
Related
hello,
i have a strange wifi issue on my s3.
when i flash cm10.1 the phone keeps searhing for ip-adress.
when i flash paranoidandriod i have the same wifi issue.
then i go back to a 4.2.2 leak the wifi is working well, also on a 4.1.2 the wifi is working.
but i still wanna use paranoid andriod:crying: i like it so much.
i have tried serveval system format, factory resets. data wipes, flashed rom with odin.
does anybody have a solution for this?
regards mike,
Hey Mike
you should post at the PA q&a thread..
kiyamizio said:
hello,
i have a strange wifi issue on my s3.
when i flash cm10.1 the phone keeps searhing for ip-adress.
when i flash paranoidandriod i have the same wifi issue.
then i go back to a 4.2.2 leak the wifi is working well, also on a 4.1.2 the wifi is working.
but i still wanna use paranoid andriod:crying: i like it so much.
i have tried serveval system format, factory resets. data wipes, flashed rom with odin.
does anybody have a solution for this?
regards mike,
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2245408
Try this see if it helps also its better to use WiFi folder from a newer Samsung ROM that worked for you
So my bro got a i9300 S3 (international), its his first android after iphones for years.
Anyway he has tried to install Cyanogenmod and reckons there is no wifi (will show his router but not connect)
Stock works fine but he hates touchwiz.
The steps he has taken are....
updates to 4.3 from Kies
rooted via odin
installed cwm
installed cm10.2 and gapps
He says everything is perfect except wifi, its sees router and saves connection but doesnt connect.
His baseband is i9300buugj3
Now he is really gutted as he loves the stock android look.
Any fixes and steps would be appreciated! (I cant get to him to have a look myself hence the post!)
Perhaps update baseband would fix?? (And if so how would he do that? Via odin? Does CWM being installed affect anything?
Thanks in advance!!
roy8846 said:
So my bro got a i9300 S3 (international), its his first android after iphones for years.
Anyway he has tried to install Cyanogenmod and reckons there is no wifi (will show his router but not connect)
Stock works fine but he hates touchwiz.
The steps he has taken are....
updates to 4.3 from Kies
rooted via odin
installed cwm
installed cm10.2 and gapps
He says everything is perfect except wifi, its sees router and saves connection but doesnt connect.
His baseband is i9300buugj3
Now he is really gutted as he loves the stock android look.
Any fixes and steps would be appreciated! (I cant get to him to have a look myself hence the post!)
Perhaps update baseband would fix?? (And if so how would he do that? Via odin? Does CWM being installed affect anything?
Thanks in advance!!
Click to expand...
Click to collapse
whats the build information of the cyanogenmod that is flashed, i think its a nightly build, sometimes there are different issues in nightly builds, did you tried a stable one i mean M Snapshot, thats a stable one and also does not have wifi issues.
suyash1629 said:
whats the build information of the cyanogenmod that is flashed, i think its a nightly build, sometimes there are different issues in nightly builds, did you tried a stable one i mean M Snapshot, thats a stable one and also does not have wifi issues.
Click to expand...
Click to collapse
He says he's tried most builds inc Snapshot builds and doesnt work on any, hence he thought about his old baseband (not that he knows the problem)
roy8846 said:
He says he's tried most builds inc Snapshot builds and doesnt work on any, hence he thought about his old baseband (not that he knows the problem)
Click to expand...
Click to collapse
Have you tried to connect to other routers? does it connects to others?
suyash1629 said:
Have you tried to connect to other routers? does it connects to others?
Click to expand...
Click to collapse
He hasnt tested other routers no, but stock rom works fine on his router.
roy8846 said:
He hasnt tested other routers no, but stock rom works fine on his router.
Click to expand...
Click to collapse
this happens sometimes, i m too using cyanogenmod myself, when i was using stock rom i was able to connect to my college's router, but after flashing cyanogenmod, i was not able to connect to it, nowdays they have replaced with new router, n there is no problem inn connecting to it, even i never had problem to connect to my home's router, this happens with some router.. maybe this time with your's.. try to connect to other router than your's.
I have the exact same problem
my phone sees the router and saves connection but doesnt connect.
I also tried Wifi tether from my other phone and even that doesnt connect, it just saves the network...
this is happening on all CM based 4.2.2 roms...
havent tried 4.3 and AOSP roms...
Horoscope said:
I have the exact same problem
my phone sees the router and saves connection but doesnt connect.
I also tried Wifi tether from my other phone and even that doesnt connect, it just saves the network...
this is happening on all CM based 4.2.2 roms...
havent tried 4.3 and AOSP roms...
Click to expand...
Click to collapse
Glad he's not alone.
Anyone link to the latest 4.3 baseband for i9300??
roy8846 said:
So my bro got a i9300 S3 (international), its his first android after iphones for years.
Anyway he has tried to install Cyanogenmod and reckons there is no wifi (will show his router but not connect)
Stock works fine but he hates touchwiz.
The steps he has taken are....
updates to 4.3 from Kies
rooted via odin
installed cwm
installed cm10.2 and gapps
He says everything is perfect except wifi, its sees router and saves connection but doesnt connect.
His baseband is i9300buugj3
Now he is really gutted as he loves the stock android look.
Any fixes and steps would be appreciated! (I cant get to him to have a look myself hence the post!)
Perhaps update baseband would fix?? (And if so how would he do that? Via odin? Does CWM being installed affect anything?
Thanks in advance!!
Click to expand...
Click to collapse
are any other devices connecting to the same wifi network? if yes, try factory reset of the phone from recovery and then flashing the custom roms.
Yes the router connects to other devices fine.
He wipes data and cache and dalvik before flashing so??
Sent via Xperia B6000 Tapatalk
roy8846 said:
Yes the router connects to other devices fine.
He wipes data and cache and dalvik before flashing so??
Sent via Xperia B6000 Tapatalk
Click to expand...
Click to collapse
WiFi is kernel
#But i would be asking in the CM discussion post .
Edited: problem solved. See my last post to the solution I found.
I don't know if it works in Odin cause I haven't tried it, but there is a link somewhere in the Skynote port ROM thread that has the modem as a zip flashable in recovery. It DOES work as I am on MJ9 on Paranoid Android 4.4.2.
Numzi said:
I don't know if it works in Odin cause I haven't tried it, but there is a link somewhere in the Skynote port ROM thread that has the modem as a zip flashable in recovery. It DOES work as I am on MJ9 on Paranoid Android 4.4.2.
Click to expand...
Click to collapse
Well from "Krowley3's" Sophisticated ROM thread, you can flash it via ODIN with this file: http://www.androidfilehost.com/?fid=23269279319198557
Thanks for letting me know its working for you on PA.
bigw34 said:
Well from "Krowley3's" Sophisticated ROM thread, you can flash it via ODIN with this file: http://www.androidfilehost.com/?fid=23269279319198557
Thanks for letting me know its working for you on PA.
Click to expand...
Click to collapse
No problem. Try flashing it then. I'm sure it should work.
Well I ended up flashing the file...the first time was through TWRP and it didnt change anything. The next time I tried through ODIN and it gave me an "unknown baseband" that a lot of people are reporting. I ended up with no data, had to flash back to stock and start all over again using vramc3.
Numzi, how did you get it working on your phone?
I'm running the new firmware with CM11. I flashed it in cwm and it works fine
tgyberg said:
I'm running the new firmware with CM11. I flashed it in cwm and it works fine
Click to expand...
Click to collapse
Maybe ill try switching over to CWM and try it. Did you notice better wifi/LTE coverage with the new firmware?
bigw34 said:
Maybe ill try switching over to CWM and try it. Did you notice better wifi/LTE coverage with the new firmware?
Click to expand...
Click to collapse
It's about the same
For anyone reading this thread and had trouble like me with the modem, try flashing this: https://dl.dropboxusercontent.com/u/48640/android/VRUEMJ9_zif.zip
I flashed it using latest twrp on slim rom/slimkat 4.4.2, and it worked perfectly.
Thanks to "zif" at this thread: http://forum.xda-developers.com/showthread.php?t=2577809&page=6
Okay so I recently decided to to upgrade to the 4.4.2 KitKat root through this video http://youtu.be/AIRoQKTLeJQ and I was running the stock deodexed rom that was provided. I then looked up some compatible custom roms and came across several that were supposedly compatible with NC5 and Safestrap 3.72. However, on most of them (Echoe Rom, Bajarom, Phoenix Rom, etc) the wifi does not turn on even after rebooting. Bajarom it would work (it would take FOREVER to turn on though) until after I restored my nandroid backup (just data) from before I upgraded to 4.4.2 via the video. Then the wifi function would stop... Echoe Rom and Phoenix Rom both had a Galaxy S5 port that had S5 apps, themes, etc. These ones wouldn't have any network access at all. WiFi and 4G would not work. I would still have a signal so I could send texts and call people. I tried flashing modules and modems and NC5 fixes but nothing would work... Does anybody know how to fix this WiFi problem?? Or does anybody know of a good, clean, custom TouchWiz rom that has working wifi? This would be greatly appreciated!
Thanks!
Did you flash modules after rom? That's the only way your wifi is going to work.
Check out giglies NC2 wifi fix and see if that helps: https://www.androidfilehost.com/?fid=23487008491963696
Yea I tried the modules and they didn't help. But thanks! I'll give this a shot.
scootier said:
Did you flash modules after rom? That's the only way your wifi is going to work.
Check out giglies NC2 wifi fix and see if that helps:
Click to expand...
Click to collapse
Thanks, that worked for me on NC5 after I lost wifi when I flashed Ktweaker Kernel
exclusivo said:
Thanks, that worked for me on NC5 after I lost wifi when I flashed Ktweaker Kernel
Click to expand...
Click to collapse
So the NC2 fix works for NC5 too? I haven't tried it yet...
the immunity said:
So the NC2 fix works for NC5 too? I haven't tried it yet...
Click to expand...
Click to collapse
Yea, I tried it last night. I was desperate and was on the verge of just reflashing the stock rom. Luckily that fixed worked, havent experienced any problems.
exclusivo said:
Yea, I tried it last night. I was desperate and was on the verge of just reflashing the stock rom. Luckily that fixed worked, havent experienced any problems.
Click to expand...
Click to collapse
What rom are you using?
the immunity said:
What rom are you using?
Click to expand...
Click to collapse
Stock rom, just rooted.
Is it safe to flash a custom rom like CM11? I upgraded my phone to 4.4.2 NC5 through ODIN, then did the Towel root and flashed Safestrap.
I dont think so.
Sent from my SCH-I545 using XDA Free mobile app
exclusivo said:
Stock rom, just rooted.
Click to expand...
Click to collapse
Wait I thought you said you were on the verge of flashing the stock rom, implying that you're running a custom rom...
the immunity said:
Wait I thought you said you were on the verge of flashing the stock rom, implying that you're running a custom rom...
Click to expand...
Click to collapse
Yea. I was going to reflash it to get back the stock kernel. I just got the phone so I didnt have much info to lose and I was in a rush and could't find a solution in the kernel thread. I see people asking about losing wifi, but no one posts any solutions.
exclusivo said:
Yea. I was going to reflash it to get back the stock kernel. I just got the phone so I didnt have much info to lose and I was in a rush and could't find a solution in the kernel thread. I see people asking about losing wifi, but no one posts any solutions.
Click to expand...
Click to collapse
Oh I get it now.
scootier said:
Did you flash modules after rom? That's the only way your wifi is going to work.
Check out giglies NC2 wifi fix and see if that helps: https://www.androidfilehost.com/?fid=23487008491963696
Click to expand...
Click to collapse
So the wifi fix worked but I'm still not getting a 4G signal and I can't make calls or send texts on Echoe Rom or Phoenix Rom. It says there's modules in that wifi fix and I even flashed separate modules but it didn't change anything. Do you know what I can do to fix this?
the immunity said:
So the wifi fix worked but I'm still not getting a 4G signal and I can't make calls or send texts on Echoe Rom or Phoenix Rom. It says there's modules in that wifi fix and I even flashed separate modules but it didn't change anything. Do you know what I can do to fix this?
Click to expand...
Click to collapse
Sounds like maybe some issues with your APN settings.
Check this thread and see if they match what you have: http://forum.xda-developers.com/showthread.php?t=2734775
scootier said:
Sounds like maybe some issues with your APN settings.
Check this thread and see if they match what you have: http://forum.xda-developers.com/showthread.php?t=2734775
Click to expand...
Click to collapse
There's no option to change APN setting in those roms... I honestly don't even know where to begin trying to fix this anymore...
Modules Needed??
Does anybody have any idea how I would flash Echoe Rom with the S5 port to my phone with Safestrap 3.72. I have the NC5 bootloader and I'm wondering what modules I need to flash in order to have working wifi AND data/calling/service. When I flash Echoe Rom my baseband version changes to NC2... Does this change the modules I need to flash? Any help would be greatly appreciated!
Thanks!
the immunity said:
Does anybody have any idea how I would flash Echoe Rom with the S5 port to my phone with Safestrap 3.72. I have the NC5 bootloader and I'm wondering what modules I need to flash in order to have working wifi AND data/calling/service. When I flash Echoe Rom my baseband version changes to NC2... Does this change the modules I need to flash? Any help would be greatly appreciated!
Thanks!
Click to expand...
Click to collapse
You could try flashing that wifi fix, which will set your modem as NC2. Then flash the NC5 modem and you'll have the NC5 baseband and working wifi (this is what I do for Hyperdrive).
NC5 modem (thanks Surge): http://www.androidfilehost.com/?fid=23329332407589337
scootier said:
You could try flashing that wifi fix, which will set your modem as NC2. Then flash the NC5 modem and you'll have the NC5 baseband and working wifi (this is what I do for Hyperdrive).
NC5 modem (thanks Surge): http://www.androidfilehost.com/?fid=23329332407589337
Click to expand...
Click to collapse
Thanks I'll try it out when I have the time!
the immunity said:
Okay so I recently decided to to upgrade to the 4.4.2 KitKat root through this video http://youtu.be/AIRoQKTLeJQ and I was running the stock deodexed rom that was provided. I then looked up some compatible custom roms and came across several that were supposedly compatible with NC5 and Safestrap 3.72. However, on most of them (Echoe Rom, Bajarom, Phoenix Rom, etc) the wifi does not turn on even after rebooting. Bajarom it would work (it would take FOREVER to turn on though) until after I restored my nandroid backup (just data) from before I upgraded to 4.4.2 via the video. Then the wifi function would stop... Echoe Rom and Phoenix Rom both had a Galaxy S5 port that had S5 apps, themes, etc. These ones wouldn't have any network access at all. WiFi and 4G would not work. I would still have a signal so I could send texts and call people. I tried flashing modules and modems and NC5 fixes but nothing would work... Does anybody know how to fix this WiFi problem?? Or does anybody know of a good, clean, custom TouchWiz rom that has working wifi? This would be greatly appreciated!
Thanks!
Click to expand...
Click to collapse
Hyperdrive is excellent. I Love it. The link and everything you will need to know can be found here. http://forum.xda-developers.com/showthread.php?t=2301724 I have tried other ROM's also, Baja, GruesomeWolf, just to name a couple and I have found Hyperdrive to be the most stable.
Hey guys I didn't think it would happen but for those of you that are still running the sm-n900v we now have official support for lineage OS 7.1.2 merged into hltetmo. The only thing that's required is the hlte recovery not the hltevzw recovery. You have to make sure you're on the latest baseband and just wait till today's official build and it will be in there. Also follow the thread link below and you'll see what I'm talking about. I just tested a test build and my data is working great.
https://forum.xda-developers.com/ga...-0-cm14-trader418-unofficial-t3459973/page427
And this is a screenshot of the test build I'm running just to show proof.
alexp1289 said:
Hey guys I didn't think it would happen but for those of you that are still running the sm-n900v we now have official support for lineage OS 7.1.2 merged into hltetmo. The only thing that's required is the hlte recovery not the hltevzw recovery. You have to make sure you're on the latest baseband and just wait till today's official build and it will be in there. Also follow the thread link below and you'll see what I'm talking about. I just tested a test build and my data is working great.
https://forum.xda-developers.com/ga...-0-cm14-trader418-unofficial-t3459973/page427
And this is a screenshot of the test build I'm running just to show proof.
Click to expand...
Click to collapse
Thanks Alexp1289! What is the latest baseband? And have you by chance tested bluetooth on this? Will it connect to a headset or car stereo?
Droidify said:
Thanks Alexp1289! What is the latest baseband? And have you by chance tested bluetooth on this? Will it connect to a headset or car stereo?
Click to expand...
Click to collapse
Latest baseband is 0F1 and Bluetooth works great I haven't had any issues so far. You'd have to flash the latest Samsung firmware package with Odin if you're not on the 0F1 baseband then flash the latest hlte twrp recovery.
Sent from my SM-N900V using Tapatalk
alexp1289 said:
Latest baseband is 0F1 and Bluetooth works great I haven't had any issues so far. You'd have to flash the latest Samsung firmware package with Odin if you're not on the 0F1 baseband then flash the latest hlte twrp recovery. Then flash the hltetmo test build zip or wait for official hltetmo build today. Verizon support is being baked into hltetmo so that's what we have to flash.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Sent from my SM-N900V using Tapatalk
alexp1289 said:
Latest baseband is 0F1 and Bluetooth works great I haven't had any issues so far. You'd have to flash the latest Samsung firmware package with Odin if you're not on the 0F1 baseband then flash the latest hlte twrp recovery.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Ok that is what I am on. Will give this a go at some point soon! Thanks
Droidify said:
Ok that is what I am on. Will give this a go at some point soon! Thanks
Click to expand...
Click to collapse
I've only gotten a couple random reboots so far but other than that it's going great.
Sent from my SM-N900V using Tapatalk
great news bobby
I've flashed it and no signal what's so ever tried 7 different ones I'm on of1 as well as unlocked
happydad4130 said:
I've flashed it and no signal what's so ever tried 7 different ones I'm on of1 as well as unlocked
Click to expand...
Click to collapse
Go to that thread I posted and ask for help. You must be doing something wrong because I'm on Verizon and everything works great on this rom.
What room did u download and what did u do when the room does boot it only boots to safemode and still no signal I'm not.a noob but damn
..
happydad4130 said:
What room did u download and what did u do when the room does boot it only boots to safemode and still no signal I'm not.a noob but damn
..
Click to expand...
Click to collapse
Download 20170719:
https://download.lineageos.org/hltetmo
You also need to have TWRP for hlte installed:
https://dl.twrp.me/hlte/twrp-3.1.1-0-hlte.img.html
And flash that recovery image with flashify:
https://play.google.com/store/apps/details?id=com.cgollner.flashify
Don't forget to download a gapps package (arm 7.1):
http://opengapps.org
You need to make sure your Verizon note 3 is on the lastest baseband which is SEPL1 if it's not you needed to flash this using Odin 3.09 here's the baseband file to flash in Odin:
https://www.androidfilehost.com/?w=files&flid=199473
Here's where you get Odin:
http://androidhost.org/PVAIv
Follow the thread link in the OP for support and submitting bugs after flashing lineage.
This ROM is working flawlessly! I am using a different kernel to add fast charge and new CPU governors. Heavy use for the past 4 days and no problems at all!
https://forum.xda-developers.com/ga...lte-synergy-kernel-la14-1-based-roms-t3612028
alexp1289 said:
You need to make sure your Verizon note 3 is on the lastest baseband which is SEPL1 if it's not you needed to flash this using Odin 3.09 here's the baseband file to flash in Odin:
Click to expand...
Click to collapse
Can you clarify the requirement for the SEPL1 baseband? Your screenshot in the OP shows OF1 as your baseband.
Thanks!
nicky666s said:
Can you clarify the requirement for the SEPL1 baseband? Your screenshot in the OP shows OF1 as your baseband.
Thanks!
Click to expand...
Click to collapse
I was wrong earlier I had to update mine. OF1 works but SEPL1 is preferred since it's the lastest.
cssr said:
This ROM is working flawlessly! I am using a different kernel to add fast charge and new CPU governors. Heavy use for the past 4 days and no problems at all!
https://forum.xda-developers.com/ga...lte-synergy-kernel-la14-1-based-roms-t3612028
Click to expand...
Click to collapse
FYI: After flashing Synergy Kernel I lost root and Reflashing SuperSU did not work. I had to flash Magisk-v13.3 after flashing the kernel and it fixed the root problem.
http://www.stechguide.com/download-magisk-v13-3/
Also, note that if you install Magisk, it will have to be uninstalled before you do an update. If you don't, it will update and you will get an error. You can still uninstall Magisk and install the update again and then reinstall Magisk. If you change the kernel again.
@ golfslicer
I had the same problem after updating the kernel and also use the same solution. Was going to post about it but, you beat me to it.
Lineage also has root (SU) solution.
https://download.lineageos.org/extras
CIFS/SMB & NFS network share
Does anyone know how to mount a cifs/smb (or nfs) share with LineageOS?
bash script that I used with Aryamod 6.5 & 6.6 & SManager no longer works with LOS. Manually trying to mount from the LOS builtin terminal or Term. Emulator (installed from Play Store), also doesn't work.
Thanks in advance.
P.S. Also can I make this permanent by editing fstab, so that the network share is mounted on boot?
I personally don't use file sharing. But a quick search for Samba(smb) will probably give you all the help you need.
Still getting a really bad echo on this mod, same as i did on the unofficial port of CM13. Any recommendations? Thanks for any help offered.
Flashed this ROM a few days ago and had no problems with it yet. Installation was a breeze. Wiped system, data, and cache, then flashed the ROM and open gapps with twrp and it booted right up. I'm using it as a daily driver at this point because it is so stable! Love stock android! Was very pleased to hear the note 3 now has official support!