A while ago, I decided to work on my old legend and upgrading it with new custom roms.
After factory reset, I have flashed CM10 rom from here and discovered my Hboot version is 0.43 and not compatible with this rom.
So I found this rom instead and made 3 different partitions as instructed. But I have discovered that my phone have lost ability to go to recovery mode during the process and cannot recognize the zip files from SD card although its still in there. I have reformatted the SD card again with one fat32 to see if its problem with partitioning but it is still having same problem.
I can see the red triangle with ! in it and selected "Apply sdcard:update.zip" which keeps giving me error message "E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) Invalid argument"
Is there any solution to get out of this situation?
Thank you for your patience
Yhcho said:
A while ago, I decided to work on my old legend and upgrading it with new custom roms.
After factory reset, I have flashed CM10 rom from here and discovered my Hboot version is 0.43 and not compatible with this rom.
So I found this rom instead and made 3 different partitions as instructed. But I have discovered that my phone have lost ability to go to recovery mode during the process and cannot recognize the zip files from SD card although its still in there. I have reformatted the SD card again with one fat32 to see if its problem with partitioning but it is still having same problem.
I can see the red triangle with ! in it and selected "Apply sdcard:update.zip" which keeps giving me error message "E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) Invalid argument"
Is there any solution to get out of this situation?
Thank you for your patience
Click to expand...
Click to collapse
I have followed this thread and I got an error message saying failed due to low battery. I will just charge the phone for a while and see if it gives same error.
I have done the fastboot recovery method from here and its keep giving me "failed (remote: not allowed)" messages.
my Legend is already rooted and currently on S-off.
I have solved the problem.
It was memory card problem. my legend works after installing CM7 using different SD card.
I am suspecting if its because I have messed up something with memory card while dividing partitions to install a Jelllybean rom,
However the faulty memory card is still functioning well on my pc which made me think there is no problem with it.
Hello,
I have a bootloop on my SGS 2 after flashing PhilZ-cwm6-ZSLPQ-OZS-3.99-signed.zip in recovery.
I had installed the MIUIV5 ROM : SGS2-3.8.23-FR-signed.zip on a Siyah kernel but we are supposed to have a new kernel for JB that is why I tried this PhilZ's kernel
the error messages are : E: failed to mount exfat /dev/block/mmcblk1p1 /sdcard
and after tweaking some more, I have a failure to mount sdcard (I had formatted many thing in the hope to clean things up but I am lost now.
Would any one have an idea to help me recover my phone ?
Hi Guys,
I have a big problem. Today I decided to install a CM ROM on my unlocked Galaxy S2 i9100. But was the worst decision ever.
First of all, I used this guide here to Root my S2 running Android 4.1.2. All went good, and it's rooted and with CWM 6.0.2.7.
Then I uploaded the zip file that contains the CM ROM to my phone and entered recovery mode. After that I used "Wipe Data/Factory Reset" but obtained this error:
Error mounting /sdcard/.android_secure!
Skipping format...
And now, the worst part is that when I Power Off and then Power On my Galaxy S2 normally, it doesn't boot correctly and goes to CWM Recovery Mode.
Just don't know what to do.
Note: I don't have external Micro SD card. I just use my phone as it came from the store. So the problem must be the internal sd card.
Can anyone help me? Did I brick my phone?
tome.mendes said:
Error mounting /sdcard/.android_secure!
Skipping format...
Click to expand...
Click to collapse
I know, may be it's too late, but for other people can be usefull for this error.
I installed CM 12 on my S2, after that I extended the internal memory using PIT files with ODIN (backup required). After ODIN, I got 6G on my system but the other 6G was missing (S2 with 12G), no sdcard0 appeared on my S2. In recovery mode, I tried to format, wipe, clean, but always the same error "Error mounting /sdcard/.android_secure!" after 4 tries, I decided to format my sdcard0 with ext4 format, and then reformat again with default type, and after that the sdcard0 works fine.
That's all, S2 like new with CM12 and 6G to install apps!
Hello,
First of all, my english isn't very good.
Ok, I have a huge problem with my lenovo k3 note, I was listening to music yesterday and suddenly it stopped. I tried to unlock, restart itp but nothing. Finally I took off the battery and they restarted the phone, it stopped on Lenovo bootloader, so again battery, restart and this time I went to TWRP recovery. I wanted to restore one of my backups, but there is no backups, internal storage is 0mb, I can't do factory reset, I can't install any zip, nothing. Windows 10 sees just external SD card, no intenal memory.
Entering TWRP makes errors in console like this:
E: Could not mount /data and unable to find crypto footer.
E: Unable to mount '/data'
E: Unable to recreate /data/media folder.
Updating partition details...
E: Unable to mount '/protect_f'
E: Unable to mount '/protect_s'
E: Unable to mount '/cache'
E: Unable to mount '/data'
...done
E: Unable to mount storage.
E: Unable to mount /data/media during GUI startup.
and some more "unable to mount /data".
So I tried to flash original rom with sp flash tool, but on my last rom (MIUI 7 custom) I didn't enable USB debbuging. Every stable ROM or flash tool version I try, every time and the end there is BROM ERROR: S_CHCKSUM_ERROR (1041) and if I boot my phone after such flash it stops on bootloader and in TWRP still internal storage 0mb. I've tried do sth with adb but it doesn't detect my phone, flash tool works though.
I don't know what to do, please guys help me! It's my first android phone and rooting a phone and recovery was a challenge (just installing roms from twrp is very easy) and I really need your help, so please help me.
Thanks in advance and have a good day!
lenovo k3 error 1041
did you solved the problem with lenovo k3? i have the same problem
Hi Guys,
I'm pretty new here and hoping you can all help me with unbricking my phone.
So I have a Samsung S3 I9300, with CM 13.0 installed, I am using CW recovery v2.7.0.0
I've installed many custom ROMS to this device over the past few years without a problem, each time formatting and wiping Dalvik cache etc..
Today my phone randomly rebooted and a message came up that my phone failed to encrypt and it wiped all my data and that I had to reboot into recovery to perform a factory reset.
A bit random I thought.. So I rebooted into recovery and did a "reset to default" in CW.. this was successful, however I noticed some issues on the terminal screen...
Code:
E: Unable to find partition size for /boot
E: Unable to find partition size for /recovery
E: Primary block device /dev/block/mmcblk0p12 for mount point is not present!
E: Unable to mount internal storage
E: Unable to mount /data/media during GUI startup
E: Unable to mount /cache
Full SELinux support is present
E: Unable to mount /cache
E: Unable to mount /cache
E: Unable to mount /data/media/TWRP/.twrps when trying to read settings file
E: Unable to mount /data
Updating Partition details...
E: Unable to mount /efs
E: Unable to mount /data
E: Unable to mount /data
E: Unable to mount /cache
E: Unable to mount /system
E: Unable to mount /data
E: Unable to mount /preload
E: Unable to mount internal storage
I've tried to format but it shows failed.
I cannot install another ROM as both the internal memory and SD card both show 0MB
I've plugged the SD card into my computer and there are still files on the card.
I've had a look online and found that typing in a command into the terminal should fix it, however nothing happens..
I get an error that mmcblk0p12 does not exist.
Code:
mke2fs /dev/block/mmcblk0p12
Any help would be great! Although i'm pretty sure it's bricked
Cheers Guys!
Chris
Gizzy00360 said:
Hi Guys,
I'm pretty new here and hoping you can all help me with unbricking my phone.
So I have a Samsung S3 I9300, with CM 13.0 installed, I am using CW recovery v2.7.0.0
I've installed many custom ROMS to this device over the past few years without a problem, each time formatting and wiping Dalvik cache etc..
Today my phone randomly rebooted and a message came up that my phone failed to encrypt and it wiped all my data and that I had to reboot into recovery to perform a factory reset.
A bit random I thought.. So I rebooted into recovery and did a "reset to default" in CW.. this was successful, however I noticed some issues on the terminal screen...
Code:
E: Unable to find partition size for /boot
E: Unable to find partition size for /recovery
E: Primary block device /dev/block/mmcblk0p12 for mount point is not present!
E: Unable to mount internal storage
E: Unable to mount /data/media during GUI startup
E: Unable to mount /cache
Full SELinux support is present
E: Unable to mount /cache
E: Unable to mount /cache
E: Unable to mount /data/media/TWRP/.twrps when trying to read settings file
E: Unable to mount /data
Updating Partition details...
E: Unable to mount /efs
E: Unable to mount /data
E: Unable to mount /data
E: Unable to mount /cache
E: Unable to mount /system
E: Unable to mount /data
E: Unable to mount /preload
E: Unable to mount internal storage
I've tried to format but it shows failed.
I cannot install another ROM as both the internal memory and SD card both show 0MB
I've plugged the SD card into my computer and there are still files on the card.
I've had a look online and found that typing in a command into the terminal should fix it, however nothing happens..
I get an error that mmcblk0p12 does not exist.
Code:
mke2fs /dev/block/mmcblk0p12
Any help would be great! Although i'm pretty sure it's bricked
Cheers Guys!
Chris
Click to expand...
Click to collapse
Did you have any success with this, Chris?
This sounds like what happened to my I9300 on CM12.1. It just froze and only rebooted to Samsung logo and stayed there.
When in TWRP recovery, there's just no access to internal memory or SD card.
The terminal mentions a lot of "E: unable to mount /data", /cache, /system, storage, etc
Most TWRP options fail to do anything, because of not being able to access partitions.
No factory reset, no wipes, no installing img's. When rebooting to system, it warns about no OS being installed.
Downloading a stock firmware now to see if it flashes via ODIN, but I don't have high hopes for it.
Does anybody know what would cause this? Or is it just bricked now?
petitgregory said:
Did you have any success with this, Chris?
This sounds like what happened to my I9300 on CM12.1. It just froze and only rebooted to Samsung logo and stayed there.
When in TWRP recovery, there's just no access to internal memory or SD card.
The terminal mentions a lot of "E: unable to mount /data", /cache, /system, storage, etc
Most TWRP options fail to do anything, because of not being able to access partitions.
No factory reset, no wipes, no installing img's. When rebooting to system, it warns about no OS being installed.
Downloading a stock firmware now to see if it flashes via ODIN, but I don't have high hopes for it.
Does anybody know what would cause this? Or is it just bricked now?
Click to expand...
Click to collapse
Hey there,
Nope the cmd I found on-line I found (above) didn't work.
Its currently just stuck on the Samsung splash screen and fails to do anything.
Gizzy00360 said:
Hey there,
Nope the cmd I found on-line I found (above) didn't work.
Its currently just stuck on the Samsung splash screen and fails to do anything.
Click to expand...
Click to collapse
Ah well, mine seems dead too. The recovery doesn't work anymore, only download mode, but ODIN can't get anything on it...
I think the main storage just died.
petitgregory said:
Ah well, mine seems dead too. The recovery doesn't work anymore, only download mode, but ODIN can't get anything on it...
I think the main storage just died.
Click to expand...
Click to collapse
Damn, I dunno what happened.. My CM was a nightly though, SO I can only assume it was unstable.
Just bizarre how my phone rebooted and gave the message that it was unable to encrypt the device and needed to be factory reset.
Gizzy00360 said:
Damn, I dunno what happened.. My CM was a nightly though, SO I can only assume it was unstable.
Just bizarre how my phone rebooted and gave the message that it was unable to encrypt the device and needed to be factory reset.
Click to expand...
Click to collapse
I was running a quite stable CM12.1 version for a couple of months now. Only had two reboots all this time.
petitgregory said:
I was running a quite stable CM12.1 version for a couple of months now. Only had two reboots all this time.
Click to expand...
Click to collapse
I had a few reboots when it was working, then it just suddenly bricked my phone
Sounds like the eMMC brickbug. You need to get the eMMC replaced. All of you that face the problems.
Well, after four years my S3 was getting very slow. It was bearable with CM, but I decided to say farewell now.
Also, my microphone was busted when I dropped it at some point, so I could only call with a headset anyway.
It's not worth replacing I think, time to move on
The same happened to my Beelink GT1 S912 9377 TV-box (after failed OTA update). Will check eMMC brickbug (from TWRP) ...