Hi:
Since I can't post it on the dev thread itself, I post it here.
I'm talking about this rom: http://forum.xda-developers.com/showthread.php?t=2248886
I have one Xperia Neo V (locked bootloader) with it and it flies, it's a wonderful rom, very well developed and with lots of room to be even better.
But I happened to see the 2.0 patch for NEO in this post http://forum.xda-developers.com/showpost.php?p=40694734&postcount=2
within the same thread and I applied it through CWM, thinking that it was an small update as many devs do.
This patch causes me the phone camera preview screen to be seen topside-down when trying to take a photo,
so it's quite hard to point and shoot, leaving camera almost unusable. So beware, I would recommend not to apply that patch.
I currently solved it by reinstalling from CWM the original 2.0 version download from the 1st post.
Since nobody else has reported it, I wanted to do it to help anyone that might do the same mistake than me (I do not blame @piCool13 the rom creator or @Tommy-Geenexus the patch contributor, I just blame myself here).
I did a factory reset when restoring original 2.0 version and recovered everything else with Titanium backup.
Good luck to everyone and have a nice Christmas season (where available).
zephyr_battiassi said:
Hi:
Since I can't post it on the dev thread itself, I post it here.
I'm talking about this rom: http://forum.xda-developers.com/showthread.php?t=2248886
I have one Xperia Neo V (locked bootloader) with it and it flies, it's a wonderful rom, very well developed and with lots of room to be even better.
But I happened to see the 2.0 patch for NEO in this post http://forum.xda-developers.com/showpost.php?p=40694734&postcount=2
within the same thread and I applied it through CWM, thinking that it was an small update as many devs do.
This patch causes me the phone camera preview screen to be seen topside-down when trying to take a photo,
so it's quite hard to point and shoot, leaving camera almost unusable. So beware, I would recommend not to apply that patch.
I currently solved it by reinstalling from CWM the original 2.0 version download from the 1st post.
Since nobody else has reported it, I wanted to do it to help anyone that might do the same mistake than me (I do not blame @piCool13 the rom creator or @Tommy-Geenexus the patch contributor, I just blame myself here).
I did a factory reset when restoring original 2.0 version and recovered everything else with Titanium backup.
Good luck to everyone and have a nice Christmas season (where available).
Click to expand...
Click to collapse
Well it seems you didn't understand what that file was... The rom originally was only for neo v... The patch was a way for neo users to also use the rom...it contains some file related to camera so when anyone with Neo v when uses neo camera will get buggy camera...
Sent from my Xperia Neo V using Tapatalk 2
I have learned this in the bad way, since I didn't find it out until after having spent a couple of weeks with this rom and
wanted to take a photo away from my home
I'm used to other roms where NEO and NEO V are mentioned or used more or less "interchangeably", but it is not in this one.
Thanks @Attitude.SSJ
zephyr_battiassi said:
Hi:
Since I can't post it on the dev thread itself, I post it here.
I'm talking about this rom: http://forum.xda-developers.com/showthread.php?t=2248886
I have one Xperia Neo V (locked bootloader) with it and it flies, it's a wonderful rom, very well developed and with lots of room to be even better.
But I happened to see the 2.0 patch for NEO in this post http://forum.xda-developers.com/showpost.php?p=40694734&postcount=2
within the same thread and I applied it through CWM, thinking that it was an small update as many devs do.
This patch causes me the phone camera preview screen to be seen topside-down when trying to take a photo,
so it's quite hard to point and shoot, leaving camera almost unusable. So beware, I would recommend not to apply that patch.
I currently solved it by reinstalling from CWM the original 2.0 version download from the 1st post.
Since nobody else has reported it, I wanted to do it to help anyone that might do the same mistake than me (I do not blame @piCool13 the rom creator or @Tommy-Geenexus the patch contributor, I just blame myself here).
I did a factory reset when restoring original 2.0 version and recovered everything else with Titanium backup.
Good luck to everyone and have a nice Christmas season (where available).
Click to expand...
Click to collapse
Hi,
I made this patch for the Xperia Neo.
Thx @Attitude.SSJ for clearing.
Regards,
Tommy.
Gesendet von meinem C6603 mit Tapatalk
Related
Since we cracked bootloader i have question how to make dual boot to work
i.e miui and sony ericsson 2.3.3
boot manger - avaialible
how to make miui to work as a second option
(no wories about memory 16gb suppose to be more than enough (me))
since we have more option now than that
http://forum.xda-developers.com/showthread.php?t=911170
can we renew this subject
i know that we can squize 2 kernel and xrec, cmw5, and few other thing but how to run 2 os ?
M
sorry if it is in wrong section
Sometimes its not a question of can it be done...
but why the hell would you need 2 roms on your phone....
install that , read the whole thread and do all the patches and u will be happy with life.
http://forum.xda-developers.com/showthread.php?t=1295089
marcoplo said:
Since we cracked bootloader i have question how to make dual boot to work
i.e miui and sony ericsson 2.3.3
boot manger - avaialible
how to make miui to work as a second option
(no wories about memory 16gb suppose to be more than enough (me))
since we have more option now than that
http://forum.xda-developers.com/showthread.php?t=911170
can we renew this subject
i know that we can squize 2 kernel and xrec, cmw5, and few other thing but how to run 2 os ?
M
sorry if it is in wrong section
Click to expand...
Click to collapse
Everybody's needs & wants are different. So are likes/dislikes/expectations etc.
So if marcopolo says that he needs dualboot, I guess somebody knowledgeable on the matter needs to advise about the possibility and ways of going about it. Not push him to try a new ROM (MIUI 1.10.8 Basic, since thread # 1295089 is for it), or did bimmerrob paste the wrong URL.
I myself have tried a few ROMS - WB TW (before SE released official 2.3.3 ROM), CM7 ZMOD, FXP 028/030 & some other flavors, but I always keep coming back to Stock or it's derivatives due to one issue or another (WLOD's & restarts mostly).
I would also love to have dualboot & would try searching more on it. Will post my search results later. I've dual booted between different Windows versions & linux on my desktop & laptop for years, so why not dual boot (between ROM's) on phone.
I may be from the minority who sometimes face crippling problems with custom ROM's (since most of the users run custom ROM's without much issues). At those times, flashing another stable/stock ROM is not possible due to various reasons (not having access to laptop etc), so temporarily, switching to another stable/stock ROM would be a nice feature to have.
Dualbooting is conceptually possible and we have even tried and tested it with 2.2 ROM's combining 2.1 ROM's
so far no one tried this on 2.3.3 roms.. ITs just a matter of trying and getting it to work.
japinder said:
Everybody's needs & wants are different. So are likes/dislikes/expectations etc.
So if marcopolo says that he needs dualboot, I guess somebody knowledgeable on the matter needs to advise about the possibility and ways of going about it. Not push him to try a new ROM (MIUI 1.10.8 Basic, since thread # 1295089 is for it), or did bimmerrob paste the wrong URL.
I myself have tried a few ROMS - WB TW (before SE released official 2.3.3 ROM), CM7 ZMOD, FXP 028/030 & some other flavors, but I always keep coming back to Stock or it's derivatives due to one issue or another (WLOD's & restarts mostly).
I would also love to have dualboot & would try searching more on it. Will post my search results later. I've dual booted between different Windows versions & linux on my desktop & laptop for years, so why not dual boot (between ROM's) on phone.
I may be from the minority who sometimes face crippling problems with custom ROM's (since most of the users run custom ROM's without much issues). At those times, flashing another stable/stock ROM is not possible due to various reasons (not having access to laptop etc), so temporarily, switching to another stable/stock ROM would be a nice feature to have.
Click to expand...
Click to collapse
I'm on the same page as you. I'd like to test a few things out while still having one ROM that I KNOW works as the primary and boot a test ROM to see if it would even work for me.
Been meaning to research and play with the old method and modify it a bit to get this idea working but never have the time.
I'll be a guinea pig for whoever gets this in alpha.
I personally need dual boot to avoid the hassle of backing up and restoring data/apps everytime i try a custom ROM
its annoying when u are not satisfied with the new one and has to switch back to an old one
so............ guys in the ur group as well !!!
donmarquis said:
I personally need dual boot to avoid the hassle of backing up and restoring data/apps everytime i try a custom ROM
its annoying when u are not satisfied with the new one and has to switch back to an old one
so............ guys in the ur group as well !!!
Click to expand...
Click to collapse
perfect deductive maind - you work me out that exacly what i had in my maind
you should work in POLICE i positive understanding!
i thinking whether any one thinks same !!!
thks
sry eng
Dual Boot is possible / but the only thing keeping us apart from that is Devs leaving for ultimate Smartphones
We Are IN Need Of Ultimate Devs :|
Sorry to say , we got a handful left
Edit : I think This Thread must go to " General " or " Q & A "
Ive noticed this since I upgraded to gingerbread.. phone is now very slow..
when I play music, it plays as something is taking up all the processing power in the background and the music plays as it is buffering, loading and playing..
the games that I download run so slowly that it feels like playing modern games on Pentium 3.
when I press the home button, all programs minimize but the icons on home screen load up one by one.. they are empty boxes and appear one by one.
anyone else have any experience like this?
any help or advice would be appreciated.
I am on stock gingerbread, i do not have any mod roms installed.. My phone has been rooted.
android version - 2.3.3
baseband version 2.1.71
-old question was closed without giving any reason, maybe it was in the wrong section... so trying again
Have you tried restarting?
Perhaps you have too many applications installed on the phone's memory, you should try moving it to the SD card in Settings > Applications > Manage applications.
Hope this is of some help.
I'd suggest rooting and installing a custom rom, it'll fix all of your issues.
I'd suggest TEAM ROM because I'm using it, and it's awesome.
And yes, the last question was in the wrong section.
hi, thanks for the reply.
I am also thinking of reflashing and installing a custom rom, but what always prevented me from doing so were the limitations of it, as every rom had some problem, some did not have working wifi, some did not have working camera.. and so on..
but I was following teh MIUI Rom and that looks promising, I noticed that the xperia x10 is not yet supported: http://miuiandroid.com/roms/miui-development-roms/
but also found this: http://forum.xda-developers.com/showthread.php?t=1307044
will this custom MIUI Rom work? should I go through with it? (it also mentioned as wifi not working and third party app must be installed to fix it)
Thanks
farazk86 said:
hi, thanks for the reply.
I am also thinking of reflashing and installing a custom rom, but what always prevented me from doing so were the limitations of it, as every rom had some problem, some did not have working wifi, some did not have working camera.. and so on..
but I was following teh MIUI Rom and that looks promising, I noticed that the xperia x10 is not yet supported: http://miuiandroid.com/roms/miui-development-roms/
but also found this: http://forum.xda-developers.com/showthread.php?t=1307044
will this custom MIUI Rom work? should I go through with it? (it also mentioned as wifi not working and third party app must be installed to fix it)
Thanks
Click to expand...
Click to collapse
I'm very happy with Oodie's ROM (MIUI): http://forum.xda-developers.com/showthread.php?t=1295089
Great battery life and very responsive. No lags, everything working. Don't be fooled if the thread seems unactive, it's because everything is working...
Unlocking BL is a one step process in FlashTool. Flashing is a "breeze"
PM me if you need assistance.
Bugsy
thanks for your offer.. i think ill send you a PM as im confused on the first step of unlocking my bootloader =/ http://forum.xda-developers.com/showthread.php?t=1254087
cheers
I've read the posts in this forum and have seen that it is possible to root and unlock the bootloader on the neo v. Has anyone had any success in loading cyanogen mod on the phone? Also does anyone know if later CM releases will support the neo v? The answers to these questions will determine if i purchase the phone, thanks.
Well they are busy working on ICS 4.0 now but maybe they will add official support later..
That said, I asked mods to move this thread to General section.
There is a topic on HTCMania about CM7 on NeoV -> http://www.htcmania.com/showthread.php?t=292218 , but it's not working for me. I have latest firmware 4.0.2.a.0.42 and when I flash CM7, my phone doesn't want to boot. Users on XDA have successfully flashed roms from other phones as well -> http://forum.xda-developers.com/showthread.php?t=1375582&page=2
If a method for fixing camera issues will be find, we will have (i guess) all the roms for Neo, Arc Ray, or Play flashable
Hello friends,
never tried rooting any android as of yet, but my phone has gone painfully slow now forcing me to do something.
i would be grateful if i get a help/ recommendation is choosing the ROM.
I want a light, fast and stable ROM but don't want to scarifies any features ( e.g CM7-ZMOD CYANOGENMOD 7 says no tethering (both wifi/usb) )
my only usage are call/sms, occasionally taking picture, videos & playing some light games like candy crush.
im zeroing on ****FeraLab*** FeraKernel-JB-v4
update:- frealab, 720p video playback don't work and so as capture
please suggest me if in going in right direction is it advised to install JB ROM in X10 kepping the stability POV ?
Thanks in advance.
I wouldnt flash a jelly bean Rom, but if you did so it would also handle your tasks.
For all features I would recommend DiXperia 7 and finally you could use a gaming Rom as they have least stuff but best preformance. On jelly bean you could use xposed as well
Gerona
Gesendet von meinem Sony Xperia SP
Ditto @keenofhiphop.
I wouldn't flash/install any ROM other than GB.
There are many reasons to install a JB ROM, but mostly those looking to install a JB ROM on an XPERIA X10i never identify any real reason, they just think they need JB+
The best ROMs and Kernels for the XPERIA X10i are all GB based and to date I know of no ICS+ Kernel that supports 2D Hardware Acceleration for videos and etc. This may change if @FeraVolt and others are able to modify the Adreno 200 drivers to support 2D HW acc in ICS+
I too would look at a gaming ROM for the least system overheads.
There is the newly created GB FeraKernel v14.1 and FeraLab ROM v30.2 which I have tested and know to have a very responsive UI and good 720p 2D video playback.
I use DoomKernel v6 and @Tof37 X10S ROM (FeraLab based) with a heavily modified build.prop which provides a similar experience to FeraKernel v14.1
Having a Class6(or greater) microSD card and offload(I use Link2SD) as much as you can helps, as the X10i built in flash only has a read of ~6MB/sec and a write of ~3MB/s. Compare this to a SanDisk Extreme 64GB card which I ran for a while in my X10i which gives a 20MB/sec read and 13MB/sec write.
I'm currently using a SanDisk Ultra 64GB card which provides a good cost/performance ratio. 17MB/sec read, 7MB/sec write
thanks @Dr Goodvibes and @keenofhiphop for inputs.
I was thinking as JB is more polished and is newer i am thinking to go for JB if i flash.
but since HW playback & recording is not available i would probably look something else other then Feralab...
i have 1 doubt at this time... do we have to flash with the latest Kernel first & then the ROM ? is it possible to revert back to old kernel at later if i change rom ?
sorry for my noobish question but im flashing any android rom for first time
netant said:
thanks @Dr Goodvibes and @keenofhiphop for inputs.
I was thinking as JB is more polished and is newer i am thinking to go for JB if i flash.
but since HW playback & recording is not available i would probably look something else other then Feralab...
i have 1 doubt at this time... do we have to flash with the latest Kernel first & then the ROM ? is it possible to revert back to old kernel at later if i change rom ?
Click to expand...
Click to collapse
True, JB has many advances in performance, security and interface options/features.
However, hardware development/drivers for the XPERIA X10i stopped at GB 2.3.3
Many of the JB performance features do not translate into real performance gains for the XPERIA X10i due to hardware constraints.
Thus GPU HW acc and camera (which is bound to the GPU) suffer. Also WiFi is 802.11g, Bluetooth is v2.1 and etc so any JB ROMs have to be retro fitted to accommodate these services.
Many developers do an excellent job of building JB ROMS and Kernels for the X10i, but they do come with some caveats and these should be understood before one installs a JB ROM.
One good thing about the Sony Ericsson XPERIA X10i is that it's a very good development platform and very robust and very hard to knowingly hard-brick the device. It can always be restored to a Sony Ericsson default firmware of GB 2.3.3 at any time, with a PC and a USB cable.
When you root the device you can install CWM recovery from flashtool and then using CWM Recovery to backup your system and thus provide a quick and easy way to restore a ROM even when you're not able to successfully boot Android, but still have access to CWM recovery.
If you can find an old version of flashtool circa v8, it has more features for the XPERIA X10i as newer version of flashtool don't have these services as newer phones have rightly become the focus of Flashtool now.
I would suggest FeraKernel v14.1 and FeraLab v30.2 ROM as the best first ROM, as there is currently a lot of development around this ROM/Kernel combination and thus you'll have tens of people to assist you if you have questions.
This doesn't have to be a long term commitment as you can always flash another ROM/Kernal at any time, but it does expose you to a better understand of flashing Kernel/ROMs and etc.
I would also suggest looking at unlocking your bootloader on your XPERIA X10 as this has no negative impact that I know of and also allows you to install a greater range of ROM/Kernels which rely on having an unlocked bootloader.
Dr Goodvibes said:
I would suggest FeraKernel v14.1 and FeraLab v30.2 ROM as the best first ROM, as there is currently a lot of development around this ROM/Kernel combination and thus you'll have tens of people to assist you if you have questions.
I would also suggest looking at unlocking your bootloader on your XPERIA X10 as this has no negative impact that I know of and also allows you to install a greater range of ROM/Kernels which rely on having an unlocked bootloader.
Click to expand...
Click to collapse
Thank you very much, @Dr Goodvibes, those are exactly the words boosted my confidence to go ahead & flash. and as you said once i finish a single flashing process successfully i would be more confident in future flashing,...
:good:
A word to the close: @Dr Goodvibes I totally agree to you, a found that in jb you could notice project butter and it worked really smooth but! it drains the battery a lot more than GB and there are several problems with hardware as mentioned with camera and gpu.
I think feravolt is one of the last Devs that really develop in the X10 but I could never really be stratified with his roms, as they look very mixed up from different mods. Which is off course a cosmetic thing but I didn't like it. I first flashed DiXperia 7 about two years ago and was totally happy with it, but as I am I was not stratified because flashing is fun I can say I flashed my X10 probably about 150 times, maybe more.
It was pure fun
Two months ago it finally gave up, it's on fetakernel and doesn't get flashed by Flashtool. (it was time for a new one)
However I hope you'll have a good time as I did and unlocking the bootloader only had advantages add is easy and offers you full customization.
And have a look into uot kitchen
It was the best about GB^^
Gesendet von meinem Sony Xperia SP
flashed with v30.3 final & camera fix & latest kernel 15 beta one. ... great performance boost compared to stock !!
i failed to install XRecovery though but CWM is installed so i am fine i guess...
Hello friends.
I am new to this wonderful community and very happy to be a part of it.
I am facing a very strange problem. I am trying to update my WT9i Live with walkman from Gingerbread to Ice cream sandwich. Problem is .. whenever I flash an ICS rom my touch doesn't work !! Everything else works fine (physical keys / network / audio). Then if I install GB rom again it works flawlessly.
I have unlocked bootloader.
I am using Flashtool to flash stock roms.
* WT19i_4.0.2.A.0.58_(1254-1868).ftf = works
* WT19i_4.0.2.A.0.62_(1254-1889).ftf = works
* WT19i_4.1.B.0.431_Generic.ftf = touch doesn't respond
* WT19i_4.1.B.0.587_Generic.ftf = touch doesn't respond
* WT19i_4.1.B.0.587_CUSTOMIZED CE3 WORLD I 1254-1889.ftf = touch doesn't respond
I have no idea what could be the reason. Any GB roms works smoothly. Any ICS roms bricks the touch screen. I have tried custom kernel (mesa .. kappa) and many custom ICS rom .. same problem. But at any moment I flash GB rom .. everything works.
I did all the research I could (for last 4 days) and read many threads .. tried many things. Nothing helped.
Please help me! Please Please Please.
I have seen many threads with problem "touch does't work because of flashing wrong rom or kernel".
I don't think that's my case. Because whenever I flash a stock GB rom .. it works just fine. Problem happens with ICS roms .. custom or stock.
I am going to try some custom GB rom with custom kernel. I'll post if that works.
This thread is most likely my last hope of finding a solution .. please help!
Just out of curiosity downloaded the 587 ICS generic rom from flasstool website then flashes it .. same touch problem.
Now downloading latest Nightly CM10 coconut. I'll try it. CM 9.1 stable did not worked .. same touch problem.
Please Help ! I dont see a clue ! Why ICS roms would freeze my touch when everything else works? I am on the verge of throwing my phone out of window !!!
Latest CM10 Nightly build = same problem .. touch screen is not working.
Flashed Stock GB = everything is fine !
:crying::crying::crying::crying::crying:
Now I am downloading every regional roms of stock ICS .. its all I can think of.
I know its a very old phone and update / development for it completely stopped. Its forgotten. Still I love this little cute handset and I would love to get ICS on it (for app support .. many app do not work on GB .. like google chrome).
So please help !
Hello there!
Quick question: has your LWW ever been repaired? Like, had it's touch digitizer replaced or manipulated in any way?
I know some replacement parts can conflict with non-stock (or "comes-out-of-the-box" to be precise) software. I bought a replacement display for my Mini Pro and it would just freeze on CM10.1 but worked (kinda) on stock ICS.
And yeah, it's and old phone, but a good one. Development for it and it's 2011 brothers has clearly slowed down but has absolutely not stopped
Pixelado said:
Hello there!
Quick question: has your LWW ever been repaired? Like, had it's touch digitizer replaced or manipulated in any way?
I know some replacement parts can conflict with non-stock (or "comes-out-of-the-box" to be precise) software. I bought a replacement display for my Mini Pro and it would just freeze on CM10.1 but worked (kinda) on stock ICS.
And yeah, it's and old phone, but a good one. Development for it and it's 2011 brothers has clearly slowed down but has absolutely not stopped
Click to expand...
Click to collapse
Hello. Thank you for replying. Its a second hand phone .. my brother purchased it from a friend then gave it to me. So it may have a replaced display or digitizer. I just checked with my brother and he said his friend never repaired the phone.
So GB and ICS use different digitizer drivers? Is it possible to use GB touch drivers with ICS?
No idea. Your problem is truly rare haha.
I'm out of ideas here, most of the time flashing a stock ftf does the trick, but not here.
if I were you, i'd sell that phone to someone who woulndn't care about software updates hehe.
Hello Friends.
I am posting this in case someone else face the same problem and find this thread. In my opinion ..this is a very rare and strange problem.
This problem should never happen with an original handset.
If your touch only works with Gingerbread stock roms and even after complete wipe other stock roms freeze your touch .. then you can be sure that your touch was replaced with a cheap one. Go to a servicing center and replace it with a good touch or sell the phone to someone else who doesn't care about updates.
I went to a servicing center today and replaced my touch. Now it works smoothly with stock ICS rom. I am sure it will work with CM too. It costed me around 25$.
1 tip to recognize low quality touch. Low quality touch will not have transparent bottom-left and bottom-right button. You wont be able to see the key lights through it. Good quality touch will have transparent button. Another warning .. after market touch is most probably not scratch resistant like the original touch .. so you may want to use a good screen protector (plastic film) on it.
This is not only for WT19i. Whenever you buy a secondhand set .. make sure its touch wasn't replaced and best to check if its upgraded and working properly.
Thanks to "Pixelado" for hinting me about the replaced touch issue. Then it made sense to me .. there was no other logical reason for the stock rom not working.
I am very happy with my upgraded ICS But kinda sad about the money loss ! Anyway loss is loss. This is a good handset and I hope it will serve me good. Now looking for a way to root it.
i'm always more than glad to help
Now, on the rooting issue, I strongly recommend unlocking your bootloader and flashing a pre-rooted kernel. Why, you ask? Well, you'll find out eventually
Custom kernels often pack a bunch of optimizations and the ability to overclock. I strongly recommend Rage kernel for stock ICS. Once you flash it, i'll take care of rooting your phone on first boot. If you're not able to unlock your bootloader/don't feel comfortable flashing kernels, rooting by exploits is your only choice.
By the way, I strongly suggest giving LegacyXperia CM10.1 a try. Its awesome
Pixelado said:
i'm always more than glad to help
Now, on the rooting issue, I strongly recommend unlocking your bootloader and flashing a pre-rooted kernel. Why, you ask? Well, you'll find out eventually
Custom kernels often pack a bunch of optimizations and the ability to overclock. I strongly recommend Rage kernel for stock ICS. Once you flash it, i'll take care of rooting your phone on first boot. If you're not able to unlock your bootloader/don't feel comfortable flashing kernels, rooting by exploits is your only choice.
By the way, I strongly suggest giving LegacyXperia CM10.1 a try. Its awesome
Click to expand...
Click to collapse
Thanks a lot Pixelado. I have unlocked bootloader and using mesa kernel 4.8. Would Rage 3.2 would be better than Mesa?
I'll try LegacyXperia CM10.1 .. appreciate the recommendation.
I've never tried mesa, so no comment there. Quie frankly, rage 3.2 seemed to be all i ever needed when using a stock rom. I tried lupus, but stopped using it when they switched from CWM to TWRP.
Angelina7 said:
Thanks a lot Pixelado. I have unlocked bootloader and using mesa kernel 4.8. Would Rage 3.2 would be better than Mesa?
I'll try LegacyXperia CM10.1 .. appreciate the recommendation.
Click to expand...
Click to collapse
i have same problem too
can u solve this problem?