{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unofficial CyanogenMod 9 for the LG Optimus L3 E400
Known Issues
Recharge the empty battery cause reboots
Credits
Gellmar - Kernel Update
CyanogenMod
Source
My Github
Gellmar Github
CyanogenMod Github
Installation
1. Download the ROM from the link below
2. Download gapps for 4.0 on http://goo.im/gapps
3. Put the zip files on your SDCard
4. Reboot on Recovery
5. Wipe Data / Factory Reset
6. Formaty System / Data
7. Select "Install the Zip from External Storage"
8. Choose CM zip file
9. Choose GApps zip file
10. Reboot to system
Attention
First boot takes a while.
Wait at least 5 mins for it to boot.
Download
Download in Sendspace
Or Download from Dev-Host Uploaded By @theowner997
XDAevDB Information
CyanogenMod 9, a ROM for the LG Optimus L3 E400
Contributors
P.Castro
ROM OS Version: 4.0 Ice Cream Sandwich
ROM Kernel: Linux 2.6.x
ROM Firmware Required: Stock 2.3
Version Information
Status: Stable
Created 2013-12-06
Last Updated 2013-12-07
Build 1 2013-12-07
Fixed Lockscreen Alignment
Fixed Reboots - Do not uncheck rotate screen
Fixed Freezing the screen
Updated Libs of EGL
Updated CM Source
no bugs? really?
Basically this is just CM9 with gellmar's kernel and fixes?
Lol...
eyesore123 said:
no bugs? really?
Click to expand...
Click to collapse
Comparing with the Official CM9, this does not freeze the screen or restarts
f3tus said:
Basically this is just CM9 with gellmar's kernel and fixes?
Lol...
Click to expand...
Click to collapse
Nope
P.Castro said:
Nope
Click to expand...
Click to collapse
Well why don't you include a changelog then? Did you compile this from source?
f3tus said:
Well why don't you include a changelog then? Did you compile this from source?
Click to expand...
Click to collapse
Not original development of the Zero, I caught the base of the Official CM9 already compiled the source code and build my own, which gave the ROM without BUGs, using 2 weeks and so far nothing Restarting and Freezing Screen, That what in the Official CM9 has.
no bugs really thats cool i will try it
zombienotdead said:
no bugs really thats cool i will try it
Click to expand...
Click to collapse
P.Castro said:
Not original development of the Zero, I caught the base of the Official CM9 already compiled the source code and build my own, which gave the ROM without BUGs, using 2 weeks and so far nothing Restarting and Freezing Screen, That what in the Official CM9 has.
Click to expand...
Click to collapse
Sorry, I don't understand. Did you build this yourself, and if so, please include the changelog.
f3tus said:
Sorry, I don't understand. Did you build this yourself, and if so, please include the changelog.
Click to expand...
Click to collapse
I'll include. Calm..
No bugs?? Impossible
SDmerge version?
theowner997 said:
No bugs?? Impossible
SDmerge version?
Click to expand...
Click to collapse
With all this support I think impossible even...
No.
P.Castro said:
With all this support I think impossible even...
No.
Click to expand...
Click to collapse
almost users flash custom rom using sdmerge. hope u can make sdmerge build in. u build this from other source (as minicm9) or only fix offical cm9?
I Think that all the bugs are from the kernel it self cuz I have a galaxy gio with UNOFFICIAL cm9 and with no bugs at all..like camera in gio stock and cm9 the same unlike cm9 camera on lg l3 very laggy ...but ur rom is stable and I'm using it right now thanks
zombienotdead said:
I Think that all the bugs are from the kernel it self cuz I have a galaxy gio with UNOFFICIAL cm9 and with no bugs at all..like camera in gio stock and cm9 the same unlike cm9 camera on lg l3 very laggy ...but ur rom is stable and I'm using it right now thanks
Click to expand...
Click to collapse
The camera in panorama still give a bit of lag, I'm trying to figure out the error
kien_vip said:
almost users flash custom rom using sdmerge. hope u can make sdmerge build in. u build this from other source (as minicm9) or only fix offical cm9?
Click to expand...
Click to collapse
SDmerge decreases performance, the LG L3 was not made to have 1GB of system This causes a large cache and dalvik
P.Castro said:
SDmerge decreases performance, the LG L3 was not made to have 1GB of system This causes a large cache and dalvik
Click to expand...
Click to collapse
You have a point on that
Στάλθηκε από το LG-E400 μου χρησιμοποιώντας Tapatalk 2
---------- Post added at 02:21 PM ---------- Previous post was at 02:15 PM ----------
Link is slow btw , I would like to mirror it , asking for your permission
Στάλθηκε από το LG-E400 μου χρησιμοποιώντας Tapatalk 2
theowner997 said:
You have a point on that
Στάλθηκε από το LG-E400 μου χρησιμοποιώντας Tapatalk 2
---------- Post added at 02:21 PM ---------- Previous post was at 02:15 PM ----------
Link is slow btw , I would like to mirror it , asking for your permission
Στάλθηκε από το LG-E400 μου χρησιμοποιώντας Tapatalk 2
Click to expand...
Click to collapse
Ok
Sent from my GT-I9070 using xda app-developers app
Related
Disclaimer:
Code:
All the firmwares, custom ROMs, official firmware updates, mods and tools mentioned here belong to their respective developers/owners.
You will be doing everything at your own risk.
We nor the developers cannot be held responsible if you end up damaging or bricking your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
MoKee OpenSource is based on the Google AOSP and CyanogenMod project. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
The Mfunz Forums launched this project on the 12th of December 2012, and is committed to make this ROM better and better.
Since this project is open source, anyone interested can participate in the development. Newcomers are always welcomed!
GitHub
http://github.com/MoKee
Official Releases MoKee 6.0.1 Marshmallow :
http://download.mokeedev.com/?device=spyder For spyder
http://download.mokeedev.com/?device=umts_spyder For umts_spyder
1. Wipe data/factory reset
2. Flash ROM
3. Flash Gapps
4. Reboot
Donations:
http://www.mfunz.com/en/donations/
Credits:
- MoKee Developers: http://www.mfunz.com/en/contributors
- CyanogenMod
- AOSP
- Koush for open-sourced SuperUser
- ParanoidAndroid for HALO
- Slim Roms
- @basketthis for the hosting space and build bot!
- @omkarsathe92 for the videos!
XDA:DevDB Information
MoKee OpenSource Project, a ROM for the Motorola Razr XT910/XT912
Contributors
Ryuinferno
ROM OS Version: 6.x.x Marshmallow
ROM Kernel: Linux 3.x.x
IMPORTANT
If you get problem while installation ;
You need to change meta-inf folder in zip file by this :
https://yadi.sk/d/iDkEmOA8TUWuL
I mean copy this meta-inf folder to mokee 4.4.3 Rom zip and flash it without problem.
Themes for rom 1
Themes for rom 2
Issues with themes:
Please refer here: http://forum.xda-developers.com/showthread.php?t=2577469
if you can not see the link, the other one is here ; http://d-h.st/users/Ryuinferno/?fld_id=30169#files thanks to @retekevo
If you don't want to CRT screen off animation, You need to install Xposed ınstaller and Xblast Tools for 4.0.3+ and go to Xposed Installer to active XBlast Tools How to do it?
1-)click framework on Xposed ınstaller
2-)Install/Update
3-)Reboot
4-)Modules>XBlast Tools [Click]
5-)Reboot
6-)Go to XBlast Tools>Visual Tweak>CRT Screen Off>Fade Effect[Click]
7-)Reboot and see CRT screen Effect to be off
Here the link for xposed İnstaller and XBlast tools
I took xposed installer from JBX kernel's zip. thanks for @dtrail1
Thanks to @sene1983 for helping explain how to close CRT effect.
In addition I need to say that, You can do a lot of thing using xblas tools such that you can chance everything on rom.For example; you can chance text color or holo dar or light backround or everything
Thanks bro
ellerine sağlık
ChangeLog For MoKee OpenSource
I did explain everything as well as I can
I did my best explain. And if got problem, I will be able to try help..
Already try this rom..totally awesome..great rom..better than official cm 11..you must try
Sent from my XT910 using Tapatalk
Is hdmi and 3g working?
Sent from my XT910 using xda app-developers app
Crumplet said:
Is hdmi and 3g working?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
I couldn't try HDMI, but 3G is working well on my phone.
What to install?
Release or nightly?
welder73 said:
What to install?
Release or nightly?
Click to expand...
Click to collapse
Nightly Jan 04 /14 is available now on official web site.
XT910 cihazımdan Tapatalk kullanılarak gönderildi
anticor248 said:
Nightly Jan 04 /14 is available now on official web site.
XT910 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Yes,I saw that,but I was wondering about stability...
Release has more downloads.
furkonhesti said:
Already try this rom..totally awesome..great rom..better than official cm 11..you must try
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
Nightlies? Maybe I will give a shot tonight.
Downloading now MK44.2-umts_spyder-201401040931-NIGHTLY
I hope home button works.
I flashed 4.2.2 and 4.3 versions before and I could not make "home button" work
By the way, thnx for thread.
ellerine sağlık
delete
sene1983 said:
Downloading now MK44.2-umts_spyder-201401040931-NIGHTLY
I hope home button works.
I flashed 4.2.2 and 4.3 versions before and I could not make "home button" work
By the way, thnx for thread.
ellerine sağlık
Click to expand...
Click to collapse
Thank you. Brother
Everything i tryed is working on my phone.
XT910 cihazımdan Tapatalk kullanılarak gönderildi
My friends i m using this release.
Stable and fast ROM
Thank you
great rom,after installed,no option for crt screen off animation.overal good.
Flashed on system 2 with BMM,everything is working.
No option for center clock,to change the recent button position...
Sent from my Razr XT910
welder73 said:
What to install?
Release or nightly?
Click to expand...
Click to collapse
Try with release version, it is more stable than nightly version.
I'm using the 131229 release version a few days ago and is working more than OK.
Is true, this ROM works better than official CM11.
CyanogenMod 11S
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
*or any damage to you phone !
* Do some researches before flashing this ROM !
* If you points your finger at me for any mess i will laugh !
*/
INSTRUCTIONSROM is only for v20 baseband. It's recommended to be on CWM 6.0.48+
INSTALLATION
Boot to Recovery
Wipe Data and Cache
Wipe Dalvik Cache
Format /system
Flash cyanogenmod.zip
Reboot
SCREENSHOTS
Source Code:
https://github.com/CyanogenMod
https://github.com/TeamHackLG
XDA:DevDB Information
[L5-L7][ROM][4.4.4]CyanogenMod 11S [Beta 2] , ROM for the LG Optimus L5-L7
Contributors
RolanDroid
ROM OS Version: 4.4.x KitKat
Based On: CyanogenMod 11 s
Version Information
Status: Closed
Current Beta Version: 2
Beta Release Date: 2015-04-10
Created 2015-04-07
Last Updated 2015-05-05
CHANGELOG
Code:
[COLOR="Blue"]Changelog CyanogenMod 11S Beta 2 [L5][/COLOR]
-Fixed icon pack
-Change dpi to 160
[COLOR="Blue"]Changelog CyanogenMod 11S Beta 2 [L7][/COLOR]
-Fixed bootanimation
-Fixed bootloop
-Fixed gallery
-Change dpi to 200
[COLOR="Blue"]Changelog CyanogenMod 11S Beta 1 [L7][/COLOR]
-initial release
-Added lookscreen 1+1
-Added App 1+1
-Added bootanimation Cm11s
-Modded system ui
-Modded freamworks.res
-Change file hosts
-Optimized Rom
[COLOR="Blue"]Changelog CyanogenMod 11S Beta 1 [L5][/COLOR]
-initial release
-Added lookscreen 1+1
-Added App 1+1
-Added bootanimation Cm11s
-Added LeanKernel e610
-Modded system ui
-Modded freamworks.res
-Optimized Rom
Reserved
Do you plan to port it to P700 ?
Sent from my rooted & Unlocked Bootloader B1-710 using XDA Premium 4 mobile app
abstrkt1337 said:
Do you plan to port it to P700 ?
Sent from my rooted & Unlocked Bootloader B1-710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yess
rolando 88 said:
Yess
Click to expand...
Click to collapse
If you need tester you can PM me
Sent from my rooted & Unlocked Bootloader B1-710 using XDA Premium 4 mobile app
abstrkt1337 said:
If you need tester you can PM me
Sent from my rooted & Unlocked Bootloader B1-710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok thanks :good:, please tester of p705 here
I hope you will found someone for P705
Sent from my rooted & Unlocked Bootloader B1-710 using XDA Premium 4 mobile app
Ok, link added in first post, soon build for p700/p705 ?
rolando 88 said:
Ok, link added in first post, soon build for p700/p705 ?
Click to expand...
Click to collapse
Hi sir rolando 88, what if you use cr3pt kernel for the incoming port for P705? I think its much stable and fast.... Im just sayin.
Kvn Sln said:
Hi sir rolando 88, what if you use cr3pt kernel for the incoming port for P705? I think its much stable and fast.... Im just sayin.
Click to expand...
Click to collapse
for p705 do not builded cm11S, not there are tester
rolando 88 said:
for p705 do not builded cm11S, not there are tester
Click to expand...
Click to collapse
Why don't you post your build, I'm sure somebody will test it. [emoji1]
Right now L7 is dying and still we don't have a stable Rom for daily use. [emoji20]
vaikz said:
Why don't you post your build, I'm sure somebody will test it. [emoji1]
Right now L7 is dying and still we don't have a stable Rom for daily use. [emoji20]
Click to expand...
Click to collapse
i working on it
vaikz said:
Why don't you post your build, I'm sure somebody will test it. [emoji1]
Right now L7 is dying and still we don't have a stable Rom for daily use. [emoji20]
Click to expand...
Click to collapse
Hey, i think theres a stable rom for our L7... And its the AOSP 4.4.2 It includes the famous cr3pt kernel too.
Also, im usingnit as my daily driver. No issues at all..
Kvn Sln said:
Hey, i think theres a stable rom for our L7... And its the AOSP 4.4.2 It includes the famous cr3pt kernel too.
Also, im usingnit as my daily driver. No issues at all..
Click to expand...
Click to collapse
is compatible on cm11 ? please post link
rolando 88 said:
is compatible on cm11 ? please post link
Click to expand...
Click to collapse
I dont know if its compatible with CM 11. But i guess it is compatible... It has the same kernel version 3.4.2.2
Heres the link.. http://forum.xda-developers.com/showthread.php?t=2660515
Kvn Sln said:
I dont know if its compatible with CM 11. But i guess it is compatible... It has the same kernel version 3.4.2.2
Heres the link.. http://forum.xda-developers.com/showthread.php?t=2660515
Click to expand...
Click to collapse
Please flash this kernel on cm11 by imer
I can test on my p705. :good:
Eren Kibar said:
I can test on my p705. :good:
Click to expand...
Click to collapse
Ok thanks, soon uploading rom
Discovered bugs
I found 2 bugs for now(will edit as i find more)
First bug:The icons are low resolution
Second bug:Lockscreen doesnt show up everytime,instead the launcher shows up,but I cant do anything
Third bug(which i think is because the keyboard app):Whenever I tap on a number or a letter,the keyboard disappears
[UNOFFICIAL][D855][6.0.1_r72]ResurrectionRemix - v5.7.4 [Nightly 07. Oct. 2016]
ResurrectionRemix - v5.7.4 - Android 6.0.1_r72
Download official 5.7.3 is available here from 07.08.2016:
https://basketbuild.com/devs/resurrectionremix/d855
Download unofficial nightly build 5.7.4
https://www.androidfilehost.com/?w=files&flid=91704
Important:
Before update the rom, check developer settings under CM recovery update. Go to settings developers options and turn off CM recovery update if you don't want to loose TWRP recovery.
If CM recovery replaced TWRP:
Disable Recovery protection: 1. Enable developer mode: Settings > About Phone > Build number > Tap this 7 times.
2. Disable CM recovery protection: Settings> Developer Options > Update CM Recovery > Uncheck
Then flash latest TWRP. After flashing twrp do not reboot to system! Power off your phone and then first boot into twrp and then boot to system
Other method with fastboot:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot on your computer, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install. More infos about fastboot: https://twrp.me/devices/oneplusone.html
Come from older version than 5.7.3: Clean or dirty flash? :-
Clean flash is HIGHLY recommended due to the newest security patch and introduction of thememanager service.
Dirty flash may work but If you run into issues , perform clean flashes. Dirty flash reports will be ignored
Thank you
6.0.1 (don't know if this is still necessary):
TO ALL D855 USERS: EVERYONE IS REQUIRED TO INSTALL 21C BASEBAND (AKA MODEM, RPM AND TZ PARTITIONS), OR ROM WILL NOT FLASH. 21C BASEBAND CAN BE INSTALLED FROM THIS THREAD.
Open Gapps (Google-Applications) (ARM/6.0/...):
http://opengapps.org/
Root (phone is not rooted by default, can be rooted with SuperSu-Zip via TWRP):
SuperSu / Download: TWRP-Zip
Kernel alternatives:
Kraken-Info / TWRP-Zip: Downloads
Xposed framework:
TWRP-Zip: Framework-23-arm
Xposed needed after framework installed
Great, downloading right now. Gapps included?
Sakkar said:
Great, downloading right now. Gapps included?
Click to expand...
Click to collapse
Nah, don't believe this
Very nice one, wish that come to F460 (LG G3 CAT6). Thanks
Gửi từ LG-F460S của tôi bằng cách sử dụng Tapatalk
Offical or unoffical?
Thanks!
Offical
GyGu said:
Offical
Click to expand...
Click to collapse
what is this?
download.ananasspace.de/Rom/Resurrection%20Remix/D855
It does not include Gapps, you can download them separated.
I've build it for my own with original and untouched sources from resurrection (latest version I've seen on xda was 5.6.7, maybe it will be released official? at the given link:
https://basketbuild.com/devs/resurrectionremix/d855
I've installed it over 5.7.2 (only dalvik/cache wiped), no problems till now...
coki4 said:
what is this?
download.ananasspace.de/Rom/Resurrection%20Remix/D855
Click to expand...
Click to collapse
OMG...an answer!? Maybe? (https://www.facebook.com/resurrectionremixrom/?fref=nf)
GyGu said:
OMG...an answer!? Maybe? (https://www.facebook.com/resurrectionremixrom/?fref=nf)
Click to expand...
Click to collapse
You are a very clever!
If you do not have anything useful to say, shut up!
coki4 said:
You are a very clever!
If you do not have anything useful to say, shut up!
Click to expand...
Click to collapse
stupid dude detected
Thanks for the build, always nice to have new builds. Just can you tell if there is anything special in your build versus the ones from the yadr thread?
Sent from my LG-D855 using Tapatalk
Gugus38 said:
Thanks for the build, always nice to have new builds. Just can you tell if there is anything special in your build versus the ones from the yadr thread?
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
No new build from Yadr since a while .. Firebird build it unofficially in Yadr thread with a different kernel.. and the official maintainer have a problem to upload to RR basketbuild, +Sascha on G+ RR community so I think it's the OP ????
Regards
oooohh man! RR for d855 is stable?
julianenciso93 said:
oooohh man! RR for d855 is stable?
Click to expand...
Click to collapse
Yes very stable. But RR has been available on d855 for a very long time in another thtead...
Sent from my LG-D855 using Tapatalk
not official
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Why i have 5.7.2? I flash new version
Enviado do meu LG-D855 através de Tapatalk
That happens when the builder of this zip just build without the command "make clean"
---------- Post added at 01:19 AM ---------- Previous post was at 01:16 AM ----------
Just download it now from Basketbuild, i managed to upload it, and yes, i´m the maintainer of the d855, not this guy up
InferreX said:
That happens when the builder of this zip just build without the command "make clean"
---------- Post added at 01:19 AM ---------- Previous post was at 01:16 AM ----------
Just download it now from Basketbuild, i managed to upload it, and yes, i´m the maintainer of the d855, not this guy up
Click to expand...
Click to collapse
Can i just wipe cache? Or fresh install?
Enviado do meu LG-D855 através de Tapatalk
rsimas said:
Can i just wipe cache? Or fresh install?
Enviado do meu LG-D855 através de Tapatalk
Click to expand...
Click to collapse
No, the builder up here doenst built corectlly, just donwload from basketbuild, and this build isnt offcial, that means i ( i do this because iam nice ) wouldnt help you, just donwload from basket and i can help you
J7 Hybrid MM
ROM NO LONGER MAINTAINED
I hope this rom will be stable soon.. great work!
Waiting for the stable rom for grand 2 3g, please fix all the bugs, then this rom will be best
Tisenoiazei100 said:
FOR NOOBS: THIS ROM IS IN VERY EARLY DEVELOPMENT AND ITS AS BUGGY AS HELL. IF YOU DIDNT COME FOR TESTING, PLEASE AVOID INSTALLING....
J7 Hybrid MM
J7 MM Port
Info:J7 MM heavily debloated ROM for people who want TW with basic features, great performance and battery life. Also it has themes :b
Base: NikROM v1
Port: J7 Prime aka J7 (2016) February 2017 update
Bugs:- Camera (Base ROM issue)
- BT (Partially Works!!)(Base ROM issue)
- H/W Acceleration (Base ROM issue)
- Glitching often (H/W Acceleration related)
- MTP (Base ROM related but USB debugging or connecting as camera or charging only works!!)
- Screen Mirroring
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Links:[/CENTER]
Link:
Soon. You can download old On7 Hybrid from S3 Neo thread but you have to port it.
FOR TESTING PURPOSES ONLY!!!!
Changelog:
- Soon!!!
I DO TAKE NO RESPONSIBILITY FOR ANYTHING HAPPEN IN YOUR DEVICE. FLASH CAREFULLY!!
What i want you to test:- Performance
- Battery Life
- Whatever you think is needed to be tested :b
Feel free to ask whatever about that ROM.You can use it as a base, just add me and everyone below on credits.
FAQ:
Q: S3 Neo??
A: It was originally, an S3 Neo exclusive. Check my thread on S3 Neo General
Kernel Source: https://github.com/nico600/ms013g-TW-marshmallow
Thanks to:SoUnd001 for SkyROM permission, everyone at his team and ex-maintainer adityaupreti "PLZ! DONT BAN ME!!!!"
@mhs5941 and everyone at ELECTRO TEAM for making a great TW-MM base
●Samsung for bloaty but nice UI
●AndroidFileHost For serving firmwares so i dont have to do "dark" stuff to recieve a firmware
@malbert16442 i learnt from his porting guide the basics of how tw porting works.
Any issues with permissions?? Contact via PM. Make sure to send something polite. Thanks.
Click to expand...
Click to collapse
Nice Work Bro Hope To Get Success :good:
You are crazy bro!, good luck
wow! you were a true developer wish you all the best sir.
nice work bro
So i have to fix a serious bug that sensor services doesnt want to start after first boot....
EDIT: Fixed!
Στάλθηκε από το SM-A310F μου χρησιμοποιώντας Tapatalk
Hii.bro...If U Want Screen Mirroring Fix Send Me A PM...
Anirban Ganguly said:
Hii.bro...If U Want Screen Mirroring Fix Send Me A PM...
Click to expand...
Click to collapse
Ok ill send if im unable to fix
Στάλθηκε από το SM-A310F μου χρησιμοποιώντας Tapatalk
Ok..
---------- Post added at 11:52 AM ---------- Previous post was at 11:50 AM ----------
Btw bro...Will U Port A7 2016 Hybrid MM With Multiwindow And Theme Store That A7 2016 Has...After J7 Hybrid..Or U Can Give Me In PM
Anirban Ganguly said:
Ok..
---------- Post added at 11:52 AM ---------- Previous post was at 11:50 AM ----------
Btw bro...Will U Port A7 2016 Hybrid MM With Multiwindow And Theme Store That A7 2016 Has...After J7 Hybrid..Or U Can Give Me In PM
Click to expand...
Click to collapse
IDK about A7 Hybrid MM..... I have no interest to work on any other projects except J7 Hybrid MM
Στάλθηκε από το SM-A310F μου χρησιμοποιώντας Tapatalk
Ok..bro...atleast try to port multiwindow...in J7 prime Framework...
Tisenoiazei100 said:
So i have to fix a serious bug that sensor services doesnt want to start after first boot....
EDIT: Fixed!
Στάλθηκε από το SM-A310F μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
Hey How is The ROM Status U Dont Want to release a Link ?
mhs5941 said:
Hey How is The ROM Status U Dont Want to release a Link ?
Click to expand...
Click to collapse
Heres some some stuff i have to do before release:
- Fix J7 Prime sepolicy issues.
- Re-create a more, better kernel for Grand 2 LTE! (I dont care improving much more for S3 Neo and Grand 2 3G)
- Debloat.
- Remove useless S5 Mini libs and add needed J7 Prime libs.
- Probably set proper camera app resolutions.(Thank god for MM, having just an xml file in cameradata folder and not random smali's here and there!!)
Other stuff like Camera, BT, H/W Acceleration and MTP are Base ROM related so i cant do anything.(I tried but nah, nothing helped).
Anirban Ganguly said:
Ok..bro...atleast try to port multiwindow...in J7 prime Framework...
Click to expand...
Click to collapse
It contains maybe some of the multiwindow code but didnt looked it. Probalbly you have to enable it from floating_feature.xml.
EDIT: Checked N7 floating_feature.xml. Nothing related to multiwindow
Στάλθηκε από το SM-A310F μου χρησιμοποιώντας Tapatalk
Progress
- Done debloating much more
- Changed regular charging animation with fast charge one.
- ROM development is paused(not cancelled)!!!
- Screen Mirroring Fixed
Another serious bug that fleshes this ROM useless?. Mediaserver crashing when you try to interact with SystemUI or Settings. Wow! Pretty weird things happen always due to the lack of H/W acceleration and many more?. Ill try to fix it but i prefer to move A3 Hybrid to Marshmallow(A3/A5 or A7 2017 port which has GraceUX and AOD(broken probably) too!!).
Samsung galaxy grand 2 how to samsung galaxy s8 system ui , sec settings download
Good news!!!
I fixed mediaserver issue and ROM is usable again . I'll fix few minor remaining ones and upload
Tisenoiazei100 said:
Good news!!!
I fixed mediaserver issue and ROM is usable again . I'll fix few minor remaining ones and upload
Click to expand...
Click to collapse
great effort ... keep going :good::good::fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Touchwiz Marshamallow Porting For Grand 2
Info:
TW-MM for Grand 2 has a long story. From Dyneteve(SoUnD001) originally making it and giving up to ppl who made direct ports with his kernel and having issues with permissions of kernel and stuff and many more leading to many dead projects. My ROM is trying to bring TW-MM with my own Kernel Source and as many bugfixes as i can possible do can!!.
ITS NOT YET STABLE!!!!
Screenshots:
Here
Working:
- Touchscreen
- H/W Keys
- Offline Charging
- Sensors
- Vibration (Motor)
- Sound
- Mic
- Time Service
- Storage (Internal/External)
- RIL (MMS/SMS/Calls/Data)
- H/W acceleration (720p playback, animations)
Bugs:
- Bluetooth
Code:
12-02 23:04:17.289 E/bt_hci (23321): [BTCORE] hci layer timeout waiting for response to a command. opcode: 0xfd53
- Camera(Kernel Related)
Links:
Beta 3.5: Mega.nz
Bootloop fix
Disable Auto-Brightness as its as buggy as f**k
Warning: I claim zero responsibility if something happens. Flash carefully!!!! Complains of bootloop because of kernel mods or mods in general will be ignored.
You have to be on TWRP 3.1+ and have done full wipe before flashing!!!
Itll take 15-20 minutes to boot up and maybe vibrate. Dont get worried
If you get stuck on splash screen, just reboot(Long Press Power Button). Its a MDSS fail :b
Changelog(Beta 3.5):
- Updated base (G800HXEO1CQB1 Apr 2017 update)
- Minor debloat instead of heavy
- Old installation method (No sparse_dat flashing)
- I9300I ril fix injected into installer
- Fixed location services
- Grand 2 Support (Very Experimental)
- Secured ADB again (Fixed ADB)
Sources and Extended Info:
Kernel Name: ms013g_eur_6.0.1_tw
Kernel Version: 3.4.0
Kernel Based: s3ve3g_eur_6.0.1_tw (OLDER REVISION)
Compiler: Google GCC 4.9
Firmware Based: G800HZTO1CPJ2
Firmware Version: 6.0.1 (SDK23)
Firmware Required: KITKAT
Recovery Required: TWRP 3.1.0.0+
Kernel Source
Sources:
S5 MINI SWA MM KERNEL FROM OSRC
https://github.com/ms013g-common
https://github.com/PythonLimited/android_kernel_samsung_s3ve3g-1
https://github.com/CyanogenMod/android_kernel_samsung_klte
Credits:
Me: Kernel, Port, Bugfixing
Qualcomm MSM8226 community (Device Tree and Kernel Patches)
Thargorsson (For His Work on MM and N for S3 Neo)
ms013g-common Team (For their work on MM and N for Grand 2)
OSRC (S5 Mini MM Kernel Source)
Galaxy S5 Lineage Team (Non-DVFSed Touchscreen Drivers)
Samsung (For terribly programmed but nice UI)
bug list for grand 2?
Omg. Thank you so much for adding Grand 2 support. Have you made any new improvements since the last time we spoke?
vietanhbui2000 said:
Omg. Thank you so much for adding Grand 2 support. Have you made any new improvements since the last time we spoke?
Click to expand...
Click to collapse
Very few. Now i have to do few minor stuff and release it.
Στάλθηκε από το d5110 μου χρησιμοποιώντας Tapatalk
zxo004 said:
bug list for grand 2?
Click to expand...
Click to collapse
Still unknown because im a S3 Neo user.
BT is a bug though
Thaaaaaaaaankssssss
Tisenoiazei100 said:
Very few. Now i have to do few minor stuff and release it.
Στάλθηκε από το d5110 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
So the kernel is working now?
vietanhbui2000 said:
So the kernel is working now?
Click to expand...
Click to collapse
its not yet tested on our device and galaxy tab 4
vietanhbui2000 said:
So the kernel is working now?
Click to expand...
Click to collapse
I fixed the building issue. Now let's see. Give me an ElectroRom or any TW-MM boot.img so i can add my kernel if you want.
Στάλθηκε από το d5110 μου χρησιμοποιώντας Tapatalk
Tisenoiazei100 said:
I fixed the building issue. Now let's see. Give me an ElectroRom or any TW-MM boot.img so i can add my kernel if you want.
Στάλθηκε από το d5110 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
sending on pm
Here is electro's boot.img for G7102 with my kernel inside
https://mega.nz/#!j1pBmJ4D!3PqUq7toESECVzV5UCCg4Y3vNheb6Nh8mCGSJchjgII
Test it and give me back results. Remember not having any Grand 2 camera drivers to avoid bootloop(There's a dtb issue in S3 Neo preventing us to get camera working. Unconfirmed in Grand 2).
Tisenoiazei100 said:
Here is electro's boot.img for G7102 with my kernel inside
https://mega.nz/#!j1pBmJ4D!3PqUq7toESECVzV5UCCg4Y3vNheb6Nh8mCGSJchjgII
Test it and give me back results. Remember not having any Grand 2 camera drivers to avoid bootloop(There's a dtb issue in S3 Neo preventing us to get camera working. Unconfirmed in Grand 2).
Click to expand...
Click to collapse
does it has h/w acceleration fixed or something like that?
I will try it soon as i need to flash tw mm again so it will take like half an hour
Bungeejumper said:
does it has h/w acceleration fixed or something like that?
I will try it soon as i need to flash tw mm again so it will take like half an hour
Click to expand...
Click to collapse
Yes
Στάλθηκε από το d5110 μου χρησιμοποιώντας Tapatalk
Why not make a Nougat TW rom,
Noble and aditya roms come with low bugs and better interface.
mhdsweidan said:
Why not make a Nougat TW rom,
Noble and aditya roms come with low bugs and better interface.
Click to expand...
Click to collapse
Because there's no TW nougat for MSM8226 platforms
Στάλθηκε από το d5110 μου χρησιμοποιώντας Tapatalk
Tisenoiazei100 said:
Because there's no TW nougat for MSM8226 platforms
Στάλθηκε από το d5110 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
Tested your kernel with kydrom
The rom booted with your kernel but it gives some glitches which i think is related to g2 camera drivers :d
Bungeejumper said:
Tested your kernel with kydrom
The rom booted with your kernel but it gives some glitches which i think is related to g2 camera drivers :d
Click to expand...
Click to collapse
Glad to hear that. Glitches like what though? Graphical?
Tisenoiazei100 said:
Glad to hear that. Glitches like what though? Graphical?
Click to expand...
Click to collapse
Im away so i cant help you guys right now. Sorry about that. Will test the kernel asap when i get home.
---------- Post added at 08:08 AM ---------- Previous post was at 08:04 AM ----------
Bungeejumper said:
Tested your kernel with kydrom
The rom booted with your kernel but it gives some glitches which i think is related to g2 camera drivers :d
Click to expand...
Click to collapse
I know im not a developer but can you explain how glitches somehow relate to camera drives? I thought it was only display drivers that could cause it? And btw have you tried playing HD videos to see if the h/w acceleration works?
Tisenoiazei100 said:
Glad to hear that. Glitches like what though? Graphical?
Click to expand...
Click to collapse
I think so its like everything goes black and you need to tap the screen to bring it
And i couldnt test anymore because i entered cam app by mistake and landed in a bootloop
Tisenoiazei100 said:
Glad to hear that. Glitches like what though? Graphical?
Click to expand...
Click to collapse
Tried to replace the J2 Hybrid Rom kernel (boot.img-kernel) and dt (boot.img-dt) with yours and i got bootloop .