I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
All i can suggest is your apn settings?
Can try Offline SIM APN Database (get on Google Play) to insert the correct apn settings.
alchemist83 said:
All i can suggest is your apn settings?
Can try Offline SIM APN Database (get on Google Play) to insert the correct apn settings.
Click to expand...
Click to collapse
Thank you for the suggestion. The APN settings on a fresh install, all wiped, are correct and the same as in a working setup.
Any other ideas? Am I really the only one with that problem?
Modem tried APN correct .
Suggest next step is factory reset ..
Step after that is to install an official stock rom .
Others who may have a problem post in the roms thread .
jje
JJEgan said:
Modem tried APN correct .
Suggest next step is factory reset ..
Step after that is to install an official stock rom .
Others who may have a problem post in the roms thread .
jje
Click to expand...
Click to collapse
Did a factory reset, totally clean install with everything wiped.
Also, did a clean wipe and installed official stock ROM. Lost root, started from scratch and still didn't work.
I'd love to post in the ROM forums, but haven't yet posted my mandatory 10 postings.. Maybe this thread helps me to reach that limit
DF5JT said:
Did a factory reset, totally clean install with everything wiped.
Also, did a clean wipe and installed official stock ROM. Lost root, started from scratch and still didn't work.
I'd love to post in the ROM forums, but haven't yet posted my mandatory 10 postings.. Maybe this thread helps me to reach that limit
Click to expand...
Click to collapse
Possible hardware problem then .
jje
JJEgan said:
Possible hardware problem then .
jje
Click to expand...
Click to collapse
Very unlikely since it works on stock ROMs and [email protected] 0.6.
Uhm you just said that it still did not work on Stock?
What error message does the deviche present in *#4636#* -> phone info under Gprs?
Sent from my GT-I9300 using xda premium
d4fseeker said:
Uhm you just said that it still did not work on Stock?
What error message does the deviche present in *#4636#* -> phone info under Gprs?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
No, that's not what I said. Stock ROMs work just fine; I actually just flashed the latest leak (DLI5) and had no problems with the network. The problem hasn't changed, so it's what I wrote in the OP: Only JB to work ist latest leak and [email protected] 0.6. All others can be installed but have not network connection other than WiFi.
DF5JT said:
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
Click to expand...
Click to collapse
Have you tried flashing a new baseband? i had the same problem, when flashing the franco. Kernel..
or, go back stock, then reflash the desired ROM
EDIT: If it helps, I speak/write fluent german ('Cause I live in germany ^^)
familyguy59 said:
Have you tried flashing a new baseband? i had the same problem, when flashing the franco. Kernel..
or, go back stock, then reflash the desired ROM
Click to expand...
Click to collapse
Thanks for trying to help.
Yes, I have been playing around with all kinds of basebands, trying to flash modems etc. but that does not seem to be the reason for it. I have had different modems working and the very same modems simply did not work with PA at all. Best example ist yesterday's leak DLI5 which I flashed and had a virgin like system working just fine with my network. I then flashed the PA ROM, which then had the same baseband as the latest stock ROM, but, alas, same story: No network.
The weird thing is the brief connect it always shows in the status bar. It lasts roughly 4-5 seconds and then disconnects again, only showing the empty network status display.
It really sucks, because I find the idea of hybrid ROMs really appealing, in fact, this seems to me as a truly superior way of making use of the 720p display.
Need to try logcat next to see whether the connect/disconnect somehow can be monitored from there. Will report on that.
DF5JT said:
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
Click to expand...
Click to collapse
Bump.
Nearly the same prob to me! I loose data if I change my location, also provider "3" in Austria! Stock is working, CM10 nightly also. I tried different Modems tomorrow the ODIN Leak.
Andi
me too
no data network after flash on two diffrent galaxy s2's
kaos7 said:
no data network after flash on two diffrent galaxy s2's
Click to expand...
Click to collapse
I was having the same issue, I pulled the SIM and wiped it down, blew off the contactors, seems to of solved the problem for the time being.
WiFi works, Mobile Networks do not
2Fast 2Low Customs said:
I was having the same issue, I pulled the SIM and wiped it down, blew off the contactors, seems to of solved the problem for the time being.
Click to expand...
Click to collapse
I just installed ParanoidAndroid. I'm kind of a noob to all of this.
I understand some, but not all.
My mobile networks are not working.
I don't get any notification at the top of the screen either saying I'm on a mobile network.
I've messed around with the APN settings. It seems that every now and then it'll connect for a brief moment, but I can't really do anything unless I'm connected to WiFi.
Any help would be appreciated.
I came from a stock phone rooted.
Installed this and now I'm here.
Please HELP!!
Had this problem with stock roms..
The network is fine but doesn't exchange data correctly.. AOSP worked fine for me.. PA= flawless
BHARGAV33 said:
Had this problem with stock roms..
The network is fine but doesn't exchange data correctly.. AOSP worked fine for me.. PA= flawless
Click to expand...
Click to collapse
Turns out I just had crappy reception at home.
I wanted to get 3+ but something got in the way and had to go with the 2.+
Sorry for not understanding, but what is AOSP? I see that, but I don't get what is what.
ASOP = Android Open Source Project.. They are best but not that much good at battery
Spend some time on xda and Google your doubts.. You'll surely understand everything from android
Ok I need some help my buddy bought the S3 I9300 in India when he was there and it came unlocked and rooted, he asked me to throw a custom rom on it cause I'm pretty good with that stuff, so I got into recovery mode and did a nandroid and then wiped the cache did a system and wiped devalchick cache. Flashed the rom and it was successful and booted up everything worked fine but It would not connect to the AT&t network he cant make calls or send texts tried messing with his network setting and nothing would work, so I restored his phone back to original state and he still cant make calls or send texts anyone know what could be wrong check his IMIE number and everything is there and good everything works good just not the network....thanks
flash a different modem. also make sure the i9300 supports AT&T's frequencies
Where can I find the right modems it was running on at&t he wanted something smoother so I flashed the rom amd now it wont connect to any networks even when I reatored it back og rom
Sent from my SCH-I605 using xda app-developers app
Network gone
goldstein62 said:
Ok I need some help my buddy bought the S3 I9300 in India when he was there and it came unlocked and rooted, he asked me to throw a custom rom on it cause I'm pretty good with that stuff, so I got into recovery mode and did a nandroid and then wiped the cache did a system and wiped devalchick cache. Flashed the rom and it was successful and booted up everything worked fine but It would not connect to the AT&t network he cant make calls or send texts tried messing with his network setting and nothing would work, so I restored his phone back to original state and he still cant make calls or send texts anyone know what could be wrong check his IMIE number and everything is there and good everything works good just not the network....thanks
Click to expand...
Click to collapse
==========
happened to me twice upon updating my rom
what i did first is to checked my mobile netwrok then APN, restore the default APN and then reboot and if doesnt fixed it then change your modem
about the modem that is depend on what firmware or build you have, search xda and modems are lying around
Im using OMEGA ROM V44.1 and it is working perfectly on my S3
gudluck and hope this will help you
Hi everybody!
Yesterday, I applied a custom rom to my Galaxy Note and after a successful installation, my data plan wasn't working like it used to be.
I have to say this isn't the first time I have done this, and in the previous opportunities after flashing the rom and rebooting, the EDGE/3G icon appeared by itself detecting my data plan. I never had to configure the APN settings (like it is said in many posts I have seen here).
So, when I realize that it wasn't working properly, I re-flashed the rom but didn't worked. So then, I downloaded the ICS stock rom and flashed it through Odin, hoping it would reset all things here and would give me the initial configuration, but that didn't work either.
I have entered through settings and deactivated/activated the options related to mobile data, but that icon never appears or my data connection showed up.
Forgot to mention that this phone was unlocked through cellunlocker by code, and that I can make phone calls with no problem and also the Wifi works fine... And thank you in advance for any advice/help that you could make
If it's happening with different ROMs then take a look at your modem (baseband). Are you using I717UCLF6? Go to System Settings-About Phone-Baseband Version.
Like ^^^^ said, and you didn't say it, but I'm guessing T-Mobile. So flash any ROM you like, reboot and let but settle in, then flash the Blaze 4G or whatever T-Mobile modem works best for you.
You did enter your APN info?
Agoattamer said:
You did enter your APN info?
Click to expand...
Click to collapse
This....^^^^^^^^^^^^^^^^^^^^^^^^^^^................g
Ok so ive been running Hyperdrive for a while now without any problem. Today I decided to try Carbon. After flahing and booting I noticed that I had a little white triangle over my signal bars and a roaming notification in my pull down. At this point I have no signal only wifi. Tried restoring both of my nandroids but they boot up with the same problem.. Anyone know how this can be fixed?
Sent from my SCH-I545 using xda app-developers app
more info
Jeff Zaugg said:
Ok so ive been running Hyperdrive for a while now without any problem. Today I decided to try Carbon. After flahing and booting I noticed that I had a little white triangle over my signal bars and a roaming notification in my pull down. At this point I have no signal only wifi. Tried restoring both of my nandroids but they boot up with the same problem.. Anyone know how this can be fixed?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
So, do you still have IMEI in your "about phone" settings? Or all they all zeros or unknowns? Carbon 4.2 or 4.3? You didn't include enough information for me to really be helpful. but, to me it sounds like you lost your IMEI and thus cannot get a signal or APN.
I think it was carbon 4.2. Sorry not a 100% sure though. I've since then oden the me7 update but unfortunately it didnt fix the problem. Oh and yes theres a long number there its not all zeros or unknown
Sent from my SCH-I545 using xda app-developers app
Jeff Zaugg said:
Ok so ive been running Hyperdrive for a while now without any problem. Today I decided to try Carbon. After flahing and booting I noticed that I had a little white triangle over my signal bars and a roaming notification in my pull down. At this point I have no signal only wifi. Tried restoring both of my nandroids but they boot up with the same problem.. Anyone know how this can be fixed?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I too am having this issue. Also from flashing Carbon rom 20130909-0127-jfltevzw.
What I have tried. (with data wipes in between)
Flashing another AOSP rom (CM 10.2 to be exact, latest nightly)
Flashing TW rom
Odin back to stock
Restored TW stock backup
A friends sim card to see if my sim had fried.
My phone as well reports an IMEI and a phone number. I dealt with the S3 issue a few times and the factory format dialer code always worked for me.
Took the phone to a Samsung booth at my local best buy. The guy there (believe it or not) was not an idiot. His phone was running CM as well. He attempted to force the latest update through and he said that his SMART (Samsung Multi something something tool) failed to recognize my device. He said he was able to tell it was flashed at some point (although i feel like this part was BS) and he was able to tell me that some config file or identifier file was missing/corrupt from the device. He recommended a Verizon insurance claim. He said that the SMART software (which according to him is basically a frontend for ODIN) could not identify what device was plugged in.
I investigated the install script for the rom and it appeared normal. I didn't notice any line that modified anything outside of /system.
I cannot apply the update the my phone grabs. I am still on MDK. The update will begin to flash and get about 2/3 done then fail (I believe it says verified failed) and then reports a error code 402 back to the OS once it reboots.
IMEI is present and valid. ERI is 5. PRL is 15233. Phone number is present and valid. IMEISV is 00.
Any suggestions or help is greatly appreciated.
erismaster said:
I too am having this issue. Also from flashing Carbon rom 20130909-0127-jfltevzw.
What I have tried. (with data wipes in between)
Flashing another AOSP rom (CM 10.2 to be exact, latest nightly)
Flashing TW rom
Odin back to stock
Restored TW stock backup
A friends sim card to see if my sim had fried.
My phone as well reports an IMEI and a phone number. I dealt with the S3 issue a few times and the factory format dialer code always worked for me.
Took the phone to a Samsung booth at my local best buy. The guy there (believe it or not) was not an idiot. His phone was running CM as well. He attempted to force the latest update through and he said that his SMART (Samsung Multi something something tool) failed to recognize my device. He said he was able to tell it was flashed at some point (although i feel like this part was BS) and he was able to tell me that some config file or identifier file was missing/corrupt from the device. He recommended a Verizon insurance claim. He said that the SMART software (which according to him is basically a frontend for ODIN) could not identify what device was plugged in.
I investigated the install script for the rom and it appeared normal. I didn't notice any line that modified anything outside of /system.
I cannot apply the update the my phone grabs. I am still on MDK. The update will begin to flash and get about 2/3 done then fail (I believe it says verified failed) and then reports a error code 402 back to the OS once it reboots.
IMEI is present and valid. ERI is 5. PRL is 15233. Phone number is present and valid. IMEISV is 00.
Any suggestions or help is greatly appreciated.
Click to expand...
Click to collapse
Pretty sure I'm having the same issue. I updated from an older carbon nightly to the latest and now my device won't activate in any ROM.
I have fixed this issue.
I flashed the latest cm nightly again WITHOUT THE SIM CARD INSERTED TO THE DEVICE. Went into settings > more... > mobile networks > changed CDMA subscription to NV. Reboot phone with the Sim in the phone now. Go back to mobile networks. If it hasn't changed back to RUIM/SIM subscription do so now. Reboot again. Device should be working again.
For me messages came I'm after changing back to RUIM/Sim but I had no signal reported. Rebooting brought that back.
Hope this helps someone.
Sent from my Nexus 7 using xda app-developers app
erismaster said:
I have fixed this issue.
I flashed the latest cm nightly again WITHOUT THE SIM CARD INSERTED TO THE DEVICE. Went into settings > more... > mobile networks > changed CDMA subscription to NV. Reboot phone with the Sim in the phone now. Go back to mobile networks. If it hasn't changed back to RUIM/SIM subscription do so now. Reboot again. Device should be working again.
For me messages came I'm after changing back to RUIM/Sim but I had no signal reported. Rebooting brought that back.
Hope this helps someone.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I can confirm this worked for me with the latest Carbon. Thanks for the help, nice to have a network connection again, lol.
erismaster said:
I have fixed this issue.
I flashed the latest cm nightly again WITHOUT THE SIM CARD INSERTED TO THE DEVICE. Went into settings > more... > mobile networks > changed CDMA subscription to NV. Reboot phone with the Sim in the phone now. Go back to mobile networks. If it hasn't changed back to RUIM/SIM subscription do so now. Reboot again. Device should be working again.
For me messages came I'm after changing back to RUIM/Sim but I had no signal reported. Rebooting brought that back.
Hope this helps someone.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much, this worked like a charm for me, except i used a Carbon stable release instead of CM
I searched other threads but found no solution.
I flashed from RRemix to Cyanogenmod and lost my Mobile Data, then went back to my Nandoid backup and everything was fine. Then tried a newer version of the RR Kit Kat and lost Mobile Data again. I went to the backup of my older RR Kit Kat and it works fine. Just curious what the issue is, I would like to be able to switch or update ROMS.
This is for a GT-i9300 btw.
Thanks!
lukeaduke said:
I searched other threads but found no solution.
I flashed from RRemix to Cyanogenmod and lost my Mobile Data, then went back to my Nandoid backup and everything was fine. Then tried a newer version of the RR Kit Kat and lost Mobile Data again. I went to the backup of my older RR Kit Kat and it works fine. Just curious what the issue is, I would like to be able to switch or update ROMS.
This is for a GT-i9300 btw.
Thanks!
Click to expand...
Click to collapse
After installation of new ROM take out your SIM card..Boot your phone>power off> Insert Sim card boot again.
I believe the APN settings is not proper. If still not worked then you have to call your SP and ask to send APN settings to your phone. It should happen automatically but may be once your phone register to SP, then SP unable to understand the phone model and not sending the settings.
Try to enable plain mode and disable
You can also Google your apn settings and set them manually lots of roms don't set them and you need to do it manually.