Hello i am trying to Hide/Show a zooper widget by pressing on it thus changing its transparency but i cant manage to make it work
i got $#Tzoop#=1[bo]100[/bo]:[bo]0[/bo]$
Made a plugin task with of zooper inside Tasker configured #Tzoop# = %ZOOP
made another task of Varrable Set %ZOOP to 1-%ZOOP
and pointed the widget on tap to this task
what did i do wrong, and how can i fix it please
i have already tried Popup Widget but the position it places the widget is not the position i want and i tried everything but cant put it in that position[the widget is normally high near the top edge but with popup widget i pop it out and its lower and cant go high enough]
IT should make a ZOOP variable with 0, then on press it should change from 0 to 1 or from 1 to 0 thus change the transparency
vitalero said:
Hello i am trying to Hide/Show a zooper widget by pressing on it thus changing its transparency but i cant manage to make it work
i got $#Tzoop#=1[bo]100[/bo]:[bo]0[/bo]$
Made a plugin task with of zooper inside Tasker configured #Tzoop# = %ZOOP
made another task of Varrable Set %ZOOP to 1-%ZOOP
and pointed the widget on tap to this task
what did i do wrong, and how can i fix it please
i have already tried Popup Widget but the position it places the widget is not the position i want and i tried everything but cant put it in that position[the widget is normally high near the top edge but with popup widget i pop it out and its lower and cant go high enough]
IT should make a ZOOP variable with 0, then on press it should change from 0 to 1 or from 1 to 0 thus change the transparency
Click to expand...
Click to collapse
Hi vitalero, please refer this to the Zooper section. Thanks
Oh damn didn't notice, my bad
Related
I've been doing some cooking of my own using dcd's 3.0.4, but since I started customizing my own, the battery icon in the top right taskbar was replaced with the clock. I liked having the battery there, as I don't need two clocks on the home screen . Now, i've done a lot of reading on this, and I found that if you use a registry editor and go to the following:
HKLM/Software/Microsoft/Shell and change the ShowTitleBarClock to 0, it replaces the clock with the battery icon.
So, I did that, and if i'm on the today screen it shows the battery in the top right, but if I open ANY other window (Programs, Settings, or any program) it switches back to the clock. If I switch back to the today screen, the battery icon is back.
How do I go about getting rid of the clock and replacing it with the battery when I have other windows/programs open?
Thanks,
Iam pretty sure there is no way to be able to see battery icon from any window. Look into vista hide battery-- its like color line running on top of your bar and u can see it no matter what window u use at the moment.
try :
HKLM\Software\Microsoft\Shell\TBOpt = 0 (DWORD decimal
Try going to Settings>System>Clocks&Alarms>More and unchecking the box to Display the clock on title bar in all programs.
You can always go into the sys/dcd folder in the kitchen and edit the RGU to stop it from doing that too..... Line 96 as the key you want to change.....
Thanks guys. I have also been looking for this info.
On the "double analog clock" ,is there a way to change settings other than places or current location?
I would like to set the first clock to UTC and the second to Home.
Would like to know this too... been trying to set the clocks to 2 different timezones, but to no avail.
anyone can advise ?
Example, I'm in UK, and I would like to set the 2nd clock to USA
I think it just shows Home and current location when in another time zone... not very useful unless you are travelling abroad
tap the widget > press menu > home settings
then select the city you would like to use as the 1st clock
Hi Folks,
Have Widget locker and enjoying it.. i have the home button disabled, and can add shortcuts to apps etc to the lock screen - what i want to do though is change the default sliders - one is fine - its slide right to unlock - left to change sound/virbrate/silent.
the bottom slider is right to camera on - (thats grand) but left or press to change brightness options - id like to get rid of the brightness option and maybe add in a shortcut to an Led torch application.. when i open widget locker in Tool mode is says to drag/drop things around.. but it wont let be alter or drop the bottom slider into the 'remove' trash can..
Any help appreciated.
Cheers,
Mick
add a new slider and on the slider chooser screen slide the tab you want to change across and it should give you the choice to change it to whatever you want
got it thanks..
Hi Folks,
One more query - is there anyway to get notifications on the lock screen with Widget locker? messages/calls/application notifications?
Cheers,
Mick
You can get an app called MissedIt! which allows you to add these to Widget Locker.
I am running this rom on my Note and I like it a lot. But, I've searched and searched and cannot find how to change the settings on the lockscreen. Specifically, I want to change the weather/temperature from C to F. I've found 3 instances of lockscreen settings in my settings but none of them seem to apply to my question.
Where are the lockscreen weather settings for ParanoidKANGdroid? Thx.
Open the main "settings" menu. Touch "interface" then "clock widget". You'll see weather in there. After your done adjusting press the checkmark in upper right hand corner! That's what must people forget to do.
settings - Interface - Clock Widget - Weather - checkmark!
I found a Watchface solution using Smartlauncher and Zooper Widget pro. With smartlauncher it's possible to create a Fullscreen (Zooper) Widget on the Lockscreen. I created 4 Watchfaces on this way. I will post a instruction for it right here.
http://picload.org/view/rgddpoia/weiss.jpg.html
http://picload.org/view/rgddclaa/braun.jpg.html
http://picload.org/view/rgddclai/blau.jpg.html
http://picload.org/view/rgddclal/schwarz.jpg.html
Some screenshots (Sorry, not inteligent enough for embedded pictures)
Instruction Watchface Samsung Gear s
Needed Apps:
-Zooper Widget pro
-Smart Launcher
Downloads:
-Background picture: http://www.filehosting.at/file/details/564305/blau.png
-Widget6.zw: http://www.filehosting.at/file/detai.../Widget 6.zw
-minimal ZIP: http://www.filehosting.at/file/detai...07/Minimal.zip
(for WLAN Symbol, thanks to STEPDRAGON)
This Watchface Solution is composed of two parts:
A) a handfree background picture
B) a zooper widget to add the Minute Hand, the Hour Hand, the Akku Hand, the Date and the Notification Counter
Before starting, go to Settings and disable Screen lock.
The Smartlauncher allows to create a fullsize-Widget on the Lockscreen. First, we have to install Smartlauncher and Zooper Widget on the Gear.
After installing this two Apps, we have to change some Settings in the Smartlauncher. First, click at the search Bar and hold. Settings will open. Choose Settings and deactivate the search Bar. Then go back to the lock screen. Click on the Clock and delete. At least, delete the five Bubbles on the same way.
Now, go to the Settings of the Launcher by clicking on the Circle With the 4 Dots, then tap on the right upper side on the 3 dots. Choose Settings.
Subcategories:
Global settings:
Screen Orientation: Portrait
Statusbar: always disabled
Transparent systembar: activated
Background: turnable and scrollable
Better readability: on
Startscreen:
Fast Start Layout: Grid
Fast Start gaps: 8
Lower keys: always disabled
App Grid:
Symbol size: 166%
Gaps Portrait: 2
Widget support:
Widget support: off
Now go to Android Settings. Moove to Display and LED- extended Desktop. Disable Status bar and Navigation bar for the Smartlauncher. (Don’t worry, both will return with a short swipe for a few seconds)
Afterwards you to to Zooper Widget. Disable just the Status Bar.
Now we have a complete empty Lockscreen. We can use it for a Fullscreen Zooper Widget (with the exception of 5mm of the bottom side of the screen). With a swipe to the right you will enter the App-Index.
You have to put the downloaded Picture blau.PNG in the Galery Folder of the Gear. I choose the way to send it per Mail to the Gear and save it.
Then we have to go to Gallery, choose the Backround picture, on the upper right Side choose this Photo as background. At least confirm Background on the upper side.
Next Step is conecting the Gear with your Computer. Open the Storage of the Gear, open Zooper Widget, and here the folder autosave. Put the downloaded widgets in the folder Autosave. Then put „minimal“ from the Download in the folder iconsets. After that, disconect the Gear and the Computer.
Now go to Lockscreen, click on it and hold. A Window will open. -Choose widget –Zooper widget pro –Zooper Widget 4x4. A shaded window will open.
Widget tap to open. Scroll down to Autosave. Choose Widget6. Then scroll down to „widget tap Action“ Choose „disable“.
At least to back to Homescreen with the navigation Bar and wait a moment. Congrats, your Gear s get back it’s watchface.