Ok, here's the deal:
Rooted the device, everything was a-ok.
Installed Clockwork, everything still a-ok.
Tried using mod manager to install Cyanogen nightly 9, phone rebooted and the progress bar for the mod install wouldn't move. I waited for a while and eventually manually turned the device off as it wasn't making any progress.
Ever since, it won't go past the screen you get at the beginning (w/ the yellow sign indicating an unsecured rom). It just stays there forever.
What I have to work with:
- Clockwork Recovery is available.
- The device is recognized by Odin when in download mode.
- The device is not recognized by the computer/Kies.
What I've tried:
- Followed the instruction for boot loop w/ both stock rom and Villain (no dice).
I'm sorta freaking out now. I have yet to see anyone having the same problem online and I really hope it's not bricked - a 600$ paperweight...
Is there something else I can try? Is it possible to flash stock PIT/Bootloader/PDA/everything else? If it is, would it fix the problem?
Please just point me in the right direction.
Thank You,
Edit: In recovery mode, the following error appears:
- Can't access to "/system/csc/VMC/system/"
Edit: In download mode, the current binary is set to "Samsung Official". Therefore I think this isn't the problem.
Edit: OMG OMG holy crap. Problem has been solved. Got a friend who had the same phone from the same provider to tell me what the firmware for the phone was. Downloaded it. Installed it w/ Odin. I almost turned religious when it booted a bit slower than what I remembered. It works well enough now, although I will probably go exchange it for a new one ASAP, before my warranty expires.
If anyone has similar problems. Don't panic and re-install stock firmware.
Cheers Folks!
Rovah said:
Ok, here's the deal:
Rooted the device, everything was a-ok.
Installed Clockwork, everything still a-ok.
Tried using mod manager to install Cyanogen nightly 9, phone rebooted and the progress bar for the mod install wouldn't move. I waited for a while and eventually manually turned the device off as it wasn't making any progress.
Ever since, it won't go past the screen you get at the beginning (w/ the yellow sign indicating an unsecured rom). It just stays there forever.
What I have to work with:
- Clockwork Recovery is available.
- The device is recognized by Odin when in download mode.
- The device is not recognized by the computer/Kies.
What I've tried:
- Followed the instruction for boot loop w/ both stock rom and Villain (no dice).
I'm sorta freaking out now. I have yet to see anyone having the same problem online and I really hope it's not bricked - a 600$ paperweight...
Is there something else I can try? Is it possible to flash stock PIT/Bootloader/PDA/everything else? If it is, would it fix the problem?
Please just point me in the right direction.
Thank You,
Edit: In recovery mode, the following error appears:
- Can't access to "/system/csc/VMC/system/"
Edit: In download mode, the current binary is set to "Samsung Official". Therefore I think this isn't the problem.
Edit: OMG OMG holy crap. Problem has been solved. Got a friend who had the same phone from the same provider to tell me what the firmware for the phone was. Downloaded it. Installed it w/ Odin. I almost turned religious when it booted a bit slower than what I remembered. It works well enough now, although I will probably go exchange it for a new one ASAP, before my warranty expires.
If anyone has similar problems. Don't panic and re-install stock firmware.
Cheers Folks!
Click to expand...
Click to collapse
Same problem. anyone?
Vincho said:
Same problem. anyone?
Click to expand...
Click to collapse
Did you read the answer ???
jje
Look online (samfirmware), ask friends or on forums for anyone who has the SGS2 w/ the same carrier in the same country and try to find the firmware version (I9100***** - the stars are letter codes). Then just download that firmware and use Odin to install it.
If you can't find it,you presumably could just flash any stock firmware and it might work (or it might make things worse, try at your own risk)
Rovah said:
Tried using mod manager to install Cyanogen nightly 9, phone rebooted and the progress bar for the mod install wouldn't move. I waited for a while and eventually manually turned the device off as it wasn't making any progress.
Click to expand...
Click to collapse
The progress bar not moving is a known issue with the CM7 Recovery. All you need to do is wait for it to say that it's finished. There is nothing wrong with your phone and no need to return it. You just cancelled the CM7 install part way through which meant not all required files were installed on the phone, causing it to not boot.
As for it taking longer to boot into android after the odin reflash. That's because it has to build up it's dalvik-cache again. This is completely normal any time you install a new rom. It only happens on first boot of a rom.
So again, no need to return your device and feel free to try CM7 again. Just remember to let it finish even if the progress bar isn't moving.
Ahh. Ok that makes sense. This ought to teach me to read before screwing around w/ my phone.
I wanted to exchange it because I wasnt sure i'd still be able to install official Samsung firmware updates through Kies.
Suppose an official 2.3.4 firmware comes out, would i be able to install it through Kies?
Sent from my GT-I9100 using XDA App
Rovah said:
Ahh. Ok that makes sense. This ought to teach me to read before screwing around w/ my phone.
I wanted to exchange it because I wasnt sure i'd still be able to install official Samsung firmware updates through Kies.
Suppose an official 2.3.4 firmware comes out, would i be able to install it through Kies?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yes, as long as the firmware you're flashing is the same as the stock version that came on the phone. And even if not, you'll get the kies updates for whatever region firmware you did flash onto the phone.
I see. Thanks a lot!
Is there any danger to flashing firmware from a different region than the one youre from?
Sent from my GT-I9100 using XDA App
Hey,
I just wanted to check about a few issues I came across when attempting to run CyanogenMod on my Galaxy S2. This is what I did:
I rooted the phone no problem and followed the guide closely just incase I messed things up. I backed up through Kies and also through SMS Backup & Restore, and Call Backup & Restore and copied all the files in the Phone folder manually through MTP.
To root, I used GT-I9100_XWKI4_insecure.tar and post-root, I reloaded GT-I9100_XWKI4_original.tar back onto the device.
Now comes where I ran into my first problem.. I followed the guide from the CyanogenMod Forum to put CyanogenMod onto the device, I (thought) backed up everything fine using Clockwork Mod (but it must have failed and I didn't notice as there was no backup available when I needed it). After attempting to load update-cm-7.1.0-GalaxyS2-signed.zip, my S2 wouldn't go past the boot-screen and just sat there until powered off when I tried to restore the backup which wasn't there as I said.
Left with no backup and a device that wouldn't boot, I loaded the S2 with CF-Root-SGS2_XW_NEE_KI4-v4.1-CWM4.tar and installed Litening_Rom_v6-1 which I am currently on but due to countless issues with it, I would like to either successfully load CyanogenMod or go back to stock firmware. I have tried to load CyanogenMod a few times but just reverted back to a NANDroid backup I made of Litening_Rom_v6-1 as I always ran into the issue of it not loading past the boot-screen.
Does anyone know what I may have done wrong for CyanogenMod not to run?
Also, in the meantime until I get it working, I would like to return to Stock Firmware. I have found GT-I9100_O2U_I9100XWKJ1_I9100O2UKJ1_I9100XXKI4.tar.md5 and Kernel_I9100XWKJ1.tar.md5 and don't know where to put them in Odin when flashing the device. I assume that the ROM goes into Phone and the Kernel goes into PDA, but I would like confirmation of this before I mess about with it.
Thanks for any help in advance,
Peter
pward90 said:
Hey,
I would like to return to Stock Firmware. I have found GT-I9100_O2U_I9100XWKJ1_I9100O2UKJ1_I9100XXKI4.tar.md5 and Kernel_I9100XWKJ1.tar.md5 and don't know where to put them in Odin when flashing the device
Basics are to always follow the instructions from the rom thread you get the rom from .
O2U xxxx tar file goes to PDA in odin and nothing else it includes a kernel so that does not need flashing twice .
Rom in phone = exploding phone phone is for modem
jje
Click to expand...
Click to collapse
Thanks, that's exactly why I wanted to ask before I did anything!
Hey Guys,
I'm sorry if I'm noobing it up here but I couldn't find a similar thread. I'm running a GT-i9300 (intl)
I just rooted my device yesterday and for the first time I flashed Cyanogenmod 10 on Odin, I followed the instructions as said. Everything flashed perfectly according to Odin.
Here were the instructions:
Noob-proof edition through ODIN:
- Download this : codeworkx.de/download/cyanoge... (have to cut URL)
- Reboot your phone in download mode
- Put the previously downloaded file as PDA
- Don't tick repartition
- Make sure repartition isn't ticked
- Flash it
Unfortunately, when I rebooted it gave me the cyanogenmod boot loop where this ring is circling leaving a trail and it just has cyanogenmod written in the middle for the past 10 minutes.
I am hoping to god I didn't hard brick my phone, I want to know what I did wrong and how do I fix this in the future?
Please help, thank you!
Go into recovery (Power, Home and Vol up for 5-10 seconds) and wipe cache/dalvik cache.
Reboot,
It's not flash for cwm? Otherwise I flashnul in Odin stock rom again and repeated the procedure, see thread.
MattHamed1 said:
Hey Guys,
I'm sorry if I'm noobing it up here but I couldn't find a similar thread. I'm running a GT-i9300 (intl)
I just rooted my device yesterday and for the first time I flashed Cyanogenmod 10 on Odin, I followed the instructions as said. Everything flashed perfectly according to Odin.
Here were the instructions:
Noob-proof edition through ODIN:
- Download this : codeworkx.de/download/cyanoge... (have to cut URL)
- Reboot your phone in download mode
- Put the previously downloaded file as PDA
- Don't tick repartition
- Make sure repartition isn't ticked
- Flash it
Unfortunately, when I rebooted it gave me the cyanogenmod boot loop where this ring is circling leaving a trail and it just has cyanogenmod written in the middle for the past 10 minutes.
I am hoping to god I didn't hard brick my phone, I want to know what I did wrong and how do I fix this in the future?
Please help, thank you!
Click to expand...
Click to collapse
Calm down, you're making it worse by panicing!
You didn't brick your phone
I'll tell you what you did, you flashed a kernel (w. recovery) via Odin. That's good.
You downloaded a zip for CM and flashed it, also very good.
But you forgot to delete cache/ reset device to the factory settings
Boot back into recovery and wipe data, that should work
Hope I could help!
familyguy59 said:
I'll tell you what you did, you flashed a kernel (w. recovery) via Odin.
Click to expand...
Click to collapse
Wrong. Cf-root does not contain a kernel.
Sent from my GT-I9300 using xda premium
My god,
You guys are lifesavers! Thanks so much for helping out the "NOOB" I don't want to make a new thread in regards to this but perhaps someone can lead me in the right direction?
I am going back to the stock ics 4.0.4 firmware w/ touchwiz and I'm just wondering when I do that is there anything else I need to do to "UNVOID" my warranty? I have a 1 year manufacturer from samsung and I have a 1 year by ensquared.com (They don't care if you brick it, they can fix it) but just incase I go with samsung how can I make it look "legit" again, and can I get stock updates from my carrier when they come again or will I have to from now on update by finding the firmware online
Sgs3 flash
Hello, I'am a "Noob" as well.
I would like to jump in on this forum with question on flashing and rooting the SGS3. I am currently working with one that is on the sprint network and would like to flash it to the Verizon prepaid Network. I have been searching since about 12:30 CST. I have downloaded ODIN 3.o.4 and I9300XXBLH1_I9300.......zip file ( I think this is only for unrooting.)
My Questions are if someone could either prepare me or route me to. Where I can get a step by step tutorial ,for beginners, on how to :
_ROOT ( If this is necessary to do before flashing)the SGS3 on 4.0.4
and
--FLASHing SGS3 Sprint to Verizon PP
I really would appreciate all the help I can get I have been watching tutorials and reading forums all afternoon but know one wants to jump right out and say Here is how to flash the sprint SGS3 to Verizon PP Lots of nice stuff on here and youtube on how to root and unroot. but my main concern is how to flash the network. iam looking for something like::
STEP 1...
STEP2..
ETC..
Here is my email [email protected] or I would except insight right form here .
Hello first time rooting this phone. Its a SGH-I777. I used the guide from galaxys2root.com/. At first it didnt work because my computer didnt recongnize my phone. I tried a different computer and it seemed successful until it rebooted. When the phone rebooted it did nothing but stay on the first screen. I still have the ability to get into Odin mode(download mode), but that is it. When i put the phone in download mode and use Odin it allows me to download the "zimage" but after rebooting it is the same exact thing. I have tried the one click root, one click factory restore. Tried restoring it on Kies. and nothing work took it to a store and the guy said he tried but it would stop in the middle of the download the only option i had with him was purchasing a new mother board for $80. Does anyone have a solution that can help me fix my phone.
Before i attempted to root it, it had OS 2.3.6 with kernal 2.6.35.7.
Go to the development section and read the stickies. There you will find stock rooted packages you can flash with Odin.
Sent from my SGH-I777 using xda premium
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
jmula said:
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
Click to expand...
Click to collapse
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
creepyncrawly said:
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
Click to expand...
Click to collapse
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
jmula said:
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
Click to expand...
Click to collapse
The next thing I would suggest is to try and flash the UCKH7 full stock package with bootloaders. However, as the dropbox links in the download repository are currently suspended, you will have to download it from SamFirmware. To be able to download, you will need to register for free if you havn't already. Search sgh-i777 in the upper right hand corner of the page, then download the I777UCKH7 version. Let us know if that will flash.
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
jmula said:
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
Click to expand...
Click to collapse
Flash a .tar version of a custom kernel with Odin. I always use an old siyah.tar, but that's just me. There are other methods floating around but that's the quickest and easiest for me. I think there's an old entropy dd.tar around somewhere too. But just flash it through Odin and you're good to go, assuming you flashed one for your version of android. If you just want to get into recovery to flash something this works as well.
There may be links to tar versions of the kernels in creepy's sig I don't remember offhand.
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
jmula said:
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
Click to expand...
Click to collapse
Give up???
I personally don't think flashing a kernel with odin is the best way to root. It increments the flash counter, for one thing, though I'm not sure how many people care about that anymore. I would suggest that you use the stock plus root package to root the phone with odin. See the links in my sig.
Guide... did someone say guide?
Feeling the pain....
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
judib said:
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
Click to expand...
Click to collapse
The ExynosAbuse application is the only practical way to root 4.0.4 without changing base. You can download it as an attachment in the OP of the developer's thread, but read through the thread first to understand its limitations and risks.
Alternatively, you could flash 4.0.3 plus root from the development forum. If you choose that route, please read the thread to understand how to install a custom kernel, which is recommended whether you plan to install a custom firmware or not. The custom kernel will contain ClockworkMod Recovery so you can flash the firmware of your choice if you wish.
There are really several routes you could choose. All of them work. Another would be to flash back to stock Gingerbread plus root. For that see my guide How to Flash Custom Binaries Without Ever Incrementing the Flash counter!! (link in sig)
Hmmmmm..
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
b0bb said:
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
Click to expand...
Click to collapse
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Phalanx7621 said:
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Click to expand...
Click to collapse
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
b0bb said:
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
Click to expand...
Click to collapse
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
creepyncrawly said:
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
Click to expand...
Click to collapse
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
b0bb said:
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
Click to expand...
Click to collapse
Not at all. I want people to help others here. I want you to help other here as well. But it is important to post only accurate information. Inaccurate information can cause someone to do the wrong action. So I always correct misinformation.