when i install a new custom rom on htc one x on intalling a zip file from recovery mod and installation is complete then i restart the phone and then hi could not load that rom and could not run recovery mod. install the recovery mod again and again butt it could not open in recovery mod plz tell the solution of it plz
shakeel_javed86 said:
when i install a new custom rom on htc one x on intalling a zip file from recovery mod and installation is complete then i restart the phone and then hi could not load that rom and could not run recovery mod. install the recovery mod again and again butt it could not open in recovery mod plz tell the solution of it plz
Click to expand...
Click to collapse
Did you try to wipe data/factory reset?
eduds said:
Did you try to wipe data/factory reset
yes i try it butt the result is same
Click to expand...
Click to collapse
shakeel_javed86 said:
eduds said:
Did you try to wipe data/factory reset
yes i try it butt the result is same
Click to expand...
Click to collapse
when i go in bootloader and run tu recovery mode it show recovery mode half of a second and restart plz tell the solution of it
Click to expand...
Click to collapse
Related
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
blindox said:
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
Click to expand...
Click to collapse
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
+1
That would be my guess, the recovery.
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
live4nyy said:
+1
That would be my guess, the recovery.
Click to expand...
Click to collapse
ltdanno360 said:
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Be sure to let us know if it worked in case anyone else with the same issue can find the answer much easier.
blindox said:
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
Click to expand...
Click to collapse
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
blindox said:
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Click to expand...
Click to collapse
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
hello my friend,
i just made the WIPE CACHE AND WIPE DALVIK CACHE and the install of the ROM.
When i saw the screen NEUTRINO I was happy, until the time the ''system loading" getting black out for a couple seconds and then come right back. I knew there was something wrong.
Now I will make the process again with the factory data reset and then i will post what happened
Thanks
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
Yes, romracer is recommended. It is the only recovery that is specifically developed for the Atrix 4G. You could also try the TRWP Recovery but romracer's recovery is proven to work well and recommended by most.
Glad everything worked out.
blindox said:
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
Click to expand...
Click to collapse
Hey Guys i was wondring why i am getting stuck in bootloop *Boot Animation* i Wiped Cache Dalvik and Even Factory Reset And Went To Stock Rom And Tried To Flash it Again But Nothing Works Tried Dirty Unicorns Rom Same As Cyangeon Mod
I was able To use it first i got my Mobile The SGS 3 I9300 but after Changing Roms it's no longer working Stuck in BootLoop Please Help Me Please i Want Cyangeon Mod Again
AboEl-WaFa said:
Hey Guys i was wondring why i am getting stuck in bootloop *Boot Animation* i Wiped Cache Dalvik and Even Factory Reset And Went To Stock Rom And Tried To Flash it Again But Nothing Works Tried Dirty Unicorns Rom Same As Cyangeon Mod
I was able To use it first i got my Mobile The SGS 3 I9300 but after Changing Roms it's no longer working Stuck in BootLoop Please Help Me Please i Want Cyangeon Mod Again
Click to expand...
Click to collapse
Try to flash a new recovery or another rom .... look here http://forum.xda-developers.com/showthread.php?t=2577629
actually i tried
Superuzzu said:
Try to flash a new recovery or another rom .... look here http://forum.xda-developers.com/showthread.php?t=2577629
Click to expand...
Click to collapse
actually i tried to do that used TWRP Latest And CWM Latest Used Dirty UNicorns Rom and used the CM Still The same Problem :\
Any Help Guyes
Please Guyes AnyOne Help Me
Please Help Me Guyes IF You Didn't Who Should Help e :\
AboEl-WaFa said:
Please Help Me Guyes IF You Didn't Who Should Help e :\
Click to expand...
Click to collapse
Usual reason is faulty firmware or user not following the instructions .
In recovery format sdcard system data and cache boot to download mode flash stock rom
Read the faqs and guides .
Fails then you need a service centre repair .
JJEgan said:
Usual reason is faulty firmware or user not following the instructions .
In recovery format sdcard system data and cache boot to download mode flash stock rom
Read the faqs and guides .
Fails then you need a service centre repair .
Click to expand...
Click to collapse
I Didnt Try That But if i deleted the Sd and Cache and all these things Can the device get in the Download Mod And Recovery ??
AboEl-WaFa said:
I Didnt Try That But if i deleted the Sd and Cache and all these things Can the device get in the Download Mod And Recovery ??
Click to expand...
Click to collapse
Hey friend try this http://forum.xda-developers.com/showthread.php?t=2187081
AboEl-WaFa said:
Hey Guys i was wondring why i am getting stuck in bootloop *Boot Animation* i Wiped Cache Dalvik and Even Factory Reset And Went To Stock Rom And Tried To Flash it Again But Nothing Works Tried Dirty Unicorns Rom Same As Cyangeon Mod
I was able To use it first i got my Mobile The SGS 3 I9300 but after Changing Roms it's no longer working Stuck in BootLoop Please Help Me Please i Want Cyangeon Mod Again
Click to expand...
Click to collapse
Flash the stock touchwiz ROM in Odin and make sure that works, if it does you probably downloaded the wrong ROM or something like that. If it doesn't work, repair center or a new mobo.
EDIT: You could try wiping everything in "mounts and storage" with CWM
i had cyangeon mod but decided to get back to the stock Rom And It Worked 100% and when i decided to Go Back To Cyangeon Mod It Got Stuck In BootLoop Wiped Cache And Dalvik And Factory Reset Still Stuck at the BootLoop
Went Back To Stock Rom And It Worked 100% Tried Dirty Unicorns Rom And It's Also Stuck In Boot Loop I Don't Know What Is The Problem :\ Can any One Help Me To Fix That
AboEl-WaFa said:
i had cyangeon mod but decided to get back to the stock Rom And It Worked 100% and when i decided to Go Back To Cyangeon Mod It Got Stuck In BootLoop Wiped Cache And Dalvik And Factory Reset Still Stuck at the BootLoop
Went Back To Stock Rom And It Worked 100% Tried Dirty Unicorns Rom And It's Also Stuck In Boot Loop I Don't Know What Is The Problem :\ Can any One Help Me To Fix That
Click to expand...
Click to collapse
Ur title is misleading first of all. The way u described it is tat u are stuck in cm rom. But u are stuck on stock. And try the cyanogenmod installer.
Sent from my GT-I9300.
Give a thank if i helped you.
I'm facing the same problem any solutions?
AboEl-WaFa said:
Can any One Help Me To Fix That
Click to expand...
Click to collapse
I believe the best option for that kind of jumping from one rom to another is to use newset philz touch recovery and follow the procedure each time you want to flash smth new:
1. Copy your new rom to internal sd card
2. enter the recovery
3. Wipe data/factory reset => clean to install a new rom.
4. install new rom from zip
It's worked for me so far.
JellyYogurt said:
Ur title is misleading first of all. The way u described it is tat u are stuck in cm rom. But u are stuck on stock. And try the cyanogenmod installer.
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
i mean that only stock roms work on my Phone and Cyangeon Mod Gets Stuck u get it now ??
AboEl-WaFa said:
i mean that only stock roms work on my Phone and Cyangeon Mod Gets Stuck u get it now ??
Click to expand...
Click to collapse
Yes its usually user error .
Read the instructions again .
mickay1982 said:
I believe the best option for that kind of jumping from one rom to another is to use newset philz touch recovery and follow the procedure each time you want to flash smth new:
1. Copy your new rom to internal sd card
2. enter the recovery
3. Wipe data/factory reset => clean to install a new rom.
4. install new rom from zip
It's worked for me so far.
Click to expand...
Click to collapse
Oh My God Oh My God Bro You Are a Life Saver <3 After Searching For 3 Days Finally SomeOne Who Can Help Thank You Again <3
AboEl-WaFa said:
Oh My God Oh My God Bro You Are a Life Saver <3 After Searching For 3 Days Finally SomeOne Who Can Help Thank You Again <3
Click to expand...
Click to collapse
no problem, glad I could help
mickay1982 said:
I believe the best option for that kind of jumping from one rom to another is to use newset philz touch recovery and follow the procedure each time you want to flash smth new:
1. Copy your new rom to internal sd card
2. enter the recovery
3. Wipe data/factory reset => clean to install a new rom.
4. install new rom from zip
It's worked for me so far.
Click to expand...
Click to collapse
You saved my life thank you man :victory::good:
i was firstly having custom recovery of lew.! and the custom rom lewa..!
i suddenly found a cynagen mod of nokia x in this forum..!
so i imediately created lewa backup of the system! and flash the new cynagen mod in my nokia x.!
but it stucks at boot loader.! :/ please fix dis up :/
then i found dat twrp or cwm custom recovery is needed so i just restored the backup and through flashify app i just changed my recovery to twrp.!
now i tried to flash the cynagenmod but still the same boot loop error :/ pls fix dis..!!
then i wanted to go back to my lewa recovery earlier created.! but it is not showing in my restore tab in twrp.!
then i thought to reinstall the lewa and den install the lewa recovery and den restore my data..!
but now when i flash a error come.. not successfull.! ::crying::crying::crying::crying::crying: pls any body can fix dis?
please help me out :/ i cant even flash new rom other than cynagen :'( n cant even recover from twrp :"( pls help me out
Few questions to be able to help out:
Is custom recovery starts correctly?
Did you clear all cache, and restore factory in custom recovery?
yes bro
mhsshark said:
Few questions to be able to help out:
Is custom recovery starts correctly?
Did you clear all cache, and restore factory in custom recovery?
Click to expand...
Click to collapse
yes bro custom recovery starts correctly.!
yes i have restored factpry settings cleared all cache
bunty7866 said:
yes bro custom recovery starts correctly.!
yes i have restored factpry settings cleared all cache
Click to expand...
Click to collapse
You can always go back to stock ROM and then install lewa
Hello
Im bored by using android 4.2 from many years, i want something new in my device
im tired of finding how to install cyanogen in lenovo A680
i dont know from where i can get working stock ROM of Lenovo A680
and i dont know how can i port rom perfectly
i hope you can help me !
Hi
For install ROM anywere(cyanogen/MIU/Stock):
Put the firmware(ROM.zip) archive to SD-card,
Switch off your phone
get into recovery (You need to CWM: forum.xda-developers. com/android/general/rooting-twrp-cwm-lenovo-a680-row-t3036490 ):
- Go to the backup and restore, create a backup of the current state of your machine,
- Wipe Data / Factory Reset -> delete all user data
- Wipe Cache Partition -> Wipe cache
- Advanced -> Wipe Dalvik Cache -> Wipe Dalvik Cache
Next Install zip from sdcard -> choose zip from sdcard -> Select the firmware and install and reboot.
OR: Install Stock Rom and put ROOT for unistall apps system, and install Theme/Xposed Modules.
maxnuk said:
For install ROM anywere(cyanogen/MIU/Stock):
Put the firmware(ROM.zip) archive to SD-card,
Switch off your phone
get into recovery (You need to CWM: forum.xda-developers. com/android/general/rooting-twrp-cwm-lenovo-a680-row-t3036490 ):
- Go to the backup and restore, create a backup of the current state of your machine,
- Wipe Data / Factory Reset -> delete all user data
- Wipe Cache Partition -> Wipe cache
- Advanced -> Wipe Dalvik Cache -> Wipe Dalvik Cache
Next Install zip from sdcard -> choose zip from sdcard -> Select the firmware and install and reboot.
OR: Install Stock Rom and put ROOT for unistall apps system, and install Theme/Xposed Modules.
Click to expand...
Click to collapse
Thanks for those step by step answer.!
sure i will follow your step when i will install ROM
oh well, can you tell me from where i can get Cyanogen for Lenovo A680 ?
Do you test: youtu.be/RyVakGPT11I
but I'm not sure...(Backup!)
maxnuk said:
Do you test: youtu.be/RyVakGPT11I
but I'm not sure...(Backup!)
Click to expand...
Click to collapse
Thanks for your help
but according to comments, it seems fake rom ,full of bugs! better I Should not try
hey can you tell me how can I port rom and make it compatible with my device?
I'm interested into cyanogen ,I already downloaded both cyanogen 12.1 and 13
I want to make it compatible with my device
I'll be thankful to you
Port rom... you have very bugs. But, to port rom: https://wiki.cyanogenmod.org/w/Doc:_porting_intro
Ideally you get a ready-rom, like the settings of your device and change.
maxnuk said:
Port rom... you have very bugs. But, to port rom: https://wiki.cyanogenmod.org/w/Doc:_porting_intro
Click to expand...
Click to collapse
I'm Sorry if I bother you
wow your answer is Really so awesome
im going to read all the contents!
Thanks Really!
Your specs: Chipset:Mediatek MT6582 // GPU: Mali-400MP2 // 4 GB Rom, 1 GB RAM.
Try: http://www.mtkroms.com/2016/02/marshmallow-cyanogenmod-13-for-mt6582.html
maxnuk said:
Your specs: Chipset:Mediatek MT6582 // GPU: Mali-400MP2 // 4 GB Rom, 1 GB RAM.
Try: http://www.mtkroms.com/2016/02/marshmallow-cyanogenmod-13-for-mt6582.html
Click to expand...
Click to collapse
you are the boss!
Really your answer is interesting
soon I'll be downloading it
but I afraid little bit, Because just 2 day ago I tried to flash custom rom and it stuck at booting logo
I was unable to boot into recovery too
then I give it to service center, and then my device working today
XD You need not have gone ... Boot loop, that always happens..
maxnuk said:
XD You need not have gone ... Boot loop, that always happens..
Click to expand...
Click to collapse
Haha Thanks dude...hey do you know how can I flash custom rom in computer? using emulators?
so that I can test whether rom is working Fine or not, so that I can avoid risk on my device
Do you have skype ?
maxnuk said:
Do you have skype ?
Click to expand...
Click to collapse
yes I've
Do you use Smart Phone Flash tool ?
maxnuk said:
Do you use Smart Phone Flash tool ?
Click to expand...
Click to collapse
I know how to use it, but I didn't used,Because last time I tried to flash rom using TWRP
you know What was Good wrong?
I did wipe cache and data, after that, I tried to install custom rom zip, and I found it's corrupted!
so, I ended up with bricking my device
that's why I want to flash rom in computer first!! Haha
when you bricked your phone, you could not get into TWRP ?
maxnuk said:
when you bricked your phone, you could not get into TWRP ?
Click to expand...
Click to collapse
yes right!! and even I was unable to get into recovery mode using key combination
just use that Smart Phone Flash tool..
maxnuk said:
just use that Smart Phone Flash tool..
Click to expand...
Click to collapse
Oh Thanks for that.. sure I'll use it next time...but still I afraid of bricking! do you have any idea how can I flash custom rom in computer emulator? so I can make sure rom is working Fine or not
I do not know. I recommend you not flash rom.