Hi,
i bought a Samsung Galaxy S3 GT-I9300 about two months ago, it's a Spanish device. I think the device came with 4.0.1 update of ICS, some weeks after buying it got 4.0.4 update and then using CF-Root 6.4 and Odin 1.85 managed to get root access so i was able to install busybox and UMS application from xda forums. So everything was working fine. Then, about 3 days ago i got an update notification which showed me a message which said "Updates will be provided in the request order preference" or something like this, i tried to update a few times more but no luck, i always got the same messages so i thought i had to wait for 4.1 update to get published but anyway everything was working fine.
The curious thing is yesterday ( August 25, 2012), when i woke up i noticed a firmware update was ready to be installed so went through it (without uninstalling CF-Root 6.4, supersu, etc.) but the strange thing was, after the update completed fine, went to settings to check the version and i saw it still/again was 4.0.4 version of ICS. Also noticed Google Play Books and Google Play Movies got installed so on one hand it seemed everything went fine cause new apps were there and everything worked as expected but on the other hand i think i already had 4.0.4 update installed on the device. Till that point one can think i got confused on the versions i got installed before the update and no major problem here. After that, as i already had root access on the device, i went to check if i still could run UMS app but it complained about missing root access so as i did before that last Android update took CF-Root 6.4 and Odin 1.85 to flash the device and get root access again (Without removing any previous install of CF-Root, super su, busybox, etc. ) but had no luck, so now it's not possible for me get root access again but i'm also still wondering how is it possible that today's update left the phone with the same Android version as before the update.
The only explanation i can find is the phone came with 4.0 version, first update got me to 4.0.1 and today's update guided me to the 4.0.4 but i'm still wondering why root access is not working as it should.
So my questions are, did i got confused about each version update? Then why can't i get root access again just repeating the same first process?
When opening busybox i can read "Not Enough Free Space in /system". Opening /system directory with Root Explorer i can read 1.05GB used, 436.39MB free. Is it right /system directory takes up to 1GB of the space? Why Busybox thinks there is 0.0MB free there?
Hope someone can help. Thanks in advanced!
Thousands of posts say OTA updates may fail if the phone is rooted .
Usual is to fail part way through an update ..
Suggest wipe the phone flash stock rom with Odin then root .
jje
JJEgan said:
Thousands of posts say OTA updates may fail if the phone is rooted .
Usual is to fail part way through an update ..
Suggest wipe the phone flash stock rom with Odin then root .
jje
Click to expand...
Click to collapse
Thanks a lot for the info. Am i going to loose installed apps, system settings, etc when doing the suggested process? Do i really need to wipe the phone before flashing the phone? I suppose i can find stock rom for my model here in the forums. Thanks!!
Hi,
i'm looking for a stock firmware for my SGS3 BaseBand I9300XXLH1 but i'm not able to find it. I think the firmware which came with my phone is unbranded and from Spain. But the question which i'm wondering is, do i really need to flash the phone? Isn't possible to solve the issue in another manner? After updating through OTA the rooted device, what's supposed to went wrong?
Lastly, what's wrong on updating a stock rooted firmware using Phone/Android update system? Don't understand how doing that can break the phone forcing me to wipe data and flash the phone.
Hope someone can help. Thanks a lot!
PD: After rebooting the phone in recovery mode i can see stock recovery has been installed with last update. Hope someone can make a bit of sense about it all. Thanks in advanced.
sibok said:
Hi,
i'm looking for a stock firmware for my SGS3 BaseBand I9300XXLH1 but i'm not able to find it. I think the firmware which came with my phone is unbranded and from Spain. But the question which i'm wondering is, do i really need to flash the phone? Isn't possible to solve the issue in another manner? After updating through OTA the rooted device, what's supposed to went wrong?
Lastly, what's wrong on updating a stock rooted firmware using Phone/Android update system? Don't understand how doing that can break the phone forcing me to wipe data and flash the phone.
Hope someone can help. Thanks a lot!
PD: After rebooting the phone in recovery mode i can see stock recovery has been installed with last update. Hope someone can make a bit of sense about it all. Thanks in advanced.
Click to expand...
Click to collapse
Get your firmware from here http://www.samfirmware.com/
then use odin to flash it, I had the same problem
Baseband is modem not firmware.
jje
Sent from my GT-I9300 using xda premium
Thanks to both for your answers. Maybe it's stupid but i'm some what more peaceful knowing other people also happened the same issue although it still feels very weird. All i did is flashing with CF-Root 6.4.
I've been looking for the stock firmware which is supposed to came with my phone at sammobile site but i'm not able to find it, although at that point ( where the phone got the same update twice, 4.0.4 ) i don't think i can trust the information provided by the phone. Under phone settings i can see Model Number is GT-l9300 and Base Band Version is i9300XXLH1 but i can't find it no sammobile site. What i find at sammobile site is I9300XXBLH1 ( notice B letter ) but i think that before this weird behaviour happened the phone showed Base Band Version I9300XXBLFB.
Is it all possible or the weird one is me?
Kickasskev, did you got 4.0.4 update twice?
Thanks again to all!
REPEAT BASEBAND IS NOT FIRMWARE nor is it firmware version .
To locate firmware try CHECKFUS .
Or stock providers roms from the sticky on XDA .
jje
sibok said:
Hi,
i bought a Samsung Galaxy S3 GT-I9300 about two months ago, it's a Spanish device. I think the device came with 4.0.1 update of ICS, some weeks after buying it got 4.0.4 update and then using CF-Root 6.4 and Odin 1.85 managed to get root access so i was able to install busybox and UMS application from xda forums. So everything was working fine. Then, about 3 days ago i got an update notification which showed me a message which said "Updates will be provided in the request order preference" or something like this, i tried to update a few times more but no luck, i always got the same messages so i thought i had to wait for 4.1 update to get published but anyway everything was working fine.
The curious thing is yesterday ( August 25, 2012), when i woke up i noticed a firmware update was ready to be installed so went through it (without uninstalling CF-Root 6.4, supersu, etc.) but the strange thing was, after the update completed fine, went to settings to check the version and i saw it still/again was 4.0.4 version of ICS. Also noticed Google Play Books and Google Play Movies got installed so on one hand it seemed everything went fine cause new apps were there and everything worked as expected but on the other hand i think i already had 4.0.4 update installed on the device. Till that point one can think i got confused on the versions i got installed before the update and no major problem here. After that, as i already had root access on the device, i went to check if i still could run UMS app but it complained about missing root access so as i did before that last Android update took CF-Root 6.4 and Odin 1.85 to flash the device and get root access again (Without removing any previous install of CF-Root, super su, busybox, etc. ) but had no luck, so now it's not possible for me get root access again but i'm also still wondering how is it possible that today's update left the phone with the same Android version as before the update.
The only explanation i can find is the phone came with 4.0 version, first update got me to 4.0.1 and today's update guided me to the 4.0.4 but i'm still wondering why root access is not working as it should.
So my questions are, did i got confused about each version update? Then why can't i get root access again just repeating the same first process?
When opening busybox i can read "Not Enough Free Space in /system". Opening /system directory with Root Explorer i can read 1.05GB used, 436.39MB free. Is it right /system directory takes up to 1GB of the space? Why Busybox thinks there is 0.0MB free there?
Hope someone can help. Thanks in advanced!
Click to expand...
Click to collapse
0. Remove all root apps from your phone.
1. Back up your rooted rom in cWM.
2. Use triangle away to get rid of the traingle.
3. Format system and cache.
4. Flash an official rom.
5. You should have all your apps + settings on a stock rom without the status being 'modified'.
victorator said:
0. Remove all root apps from your phone.
1. Back up your rooted rom in cWM.
2. Use triangle away to get rid of the traingle.
3. Format system and cache.
4. Flash an official rom.
5. You should have all your apps + settings on a stock rom without the status being 'modified'.
Click to expand...
Click to collapse
I've used checkfus and now i know my firmware.
Thanks for the step by step tips, but my phone is not rooted so i cannot use cwm, triangleapp and so. I. Annot also remove cwm manager nor supersu. I suppose i'll have to flash stock firmware first of all. Am i right?
Pretty strange, first time i rooted the device through cf-root6.4 it run flawlessly, but now i had to remove the battery after flashing ( while device was on ) and enter into recovery mode by hand which started the rooting process.
Thanks!
Hi, appreciate this is my first post and thus my question will be regarded with a certain amount of skepticism.. am only posting cos I think my issue is unusual and have not been able to find a similar question/answer through my searches on this forum
Basically, the issue is I rooted my Galaxy S3 (GT-I9300) a month or so ago, installed clockwork mod and superuser etc,. however I held off flashing a ROM because I figured my OTA jellybean update was imminent and wanted to see what the touchwiz jellybean looked like before installing Cyanogen or another ROM. wasn't sure if the OTA would come thru once I shed the stock ROM
So I waited for weeks for the OTA (am on Orange, now Everything Everywhere, in the UK) and have not received it.. last week I went onto Kies and saw there was a new firmware update, so I updated thru Kies thinking that might be what was needed to receive the OTA JB update. updated the firmware but still no JB update - however, now when I check my root status on Root Checker, or try to use any app that requires root, I'm told that I don't have "proper" root access.
My question is updating the firmware over Kies, did that mess up my root access.. am I now unrooted? (this doesn't seem correct) It seems to me I am in a limbo of sorts - not properly rooted anymore, but not fully unrooted either. I want to root the thing again so I can install cyanogen or supernexus, and I would appreciate advice on what to do - should I do a factory reset and then root again as before, or will this cause issues.. was just gon soldier ahead and do it but aware that this may cause problems if my phone already has files from the previous attempt on there.. for example the SGS3 toolkit V.6.0.0 I'm using says not to proceed with its root operations on a phone "that's already rooted" so am hesitant to proceed. Any advice would be appreciated. cheers
You've lost root with the update, just root again and it's all good.
I need some "fresh" information. All the threads Ive seen are dated back to july 2012.....
anyway... I just unrooted my phone b/c I was curious about updates to software and firmware (OTA).
It is my understanding that b/c I unrooted it auto-updated (not sure if it did or not). Is it possible to root again? (Ive tried using the tar files used for the original root, but it doesnt seem to work)
c601999 said:
I need some "fresh" information. All the threads Ive seen are dated back to july 2012.....
anyway... I just unrooted my phone b/c I was curious about updates to software and firmware (OTA).
It is my understanding that b/c I unrooted it auto-updated (not sure if it did or not). Is it possible to root again? (Ive tried using the tar files used for the original root, but it doesnt seem to work)
Click to expand...
Click to collapse
you'll likely need updated odin files to root the newer software version. i'd suggest using odin to install recovery directly and then flash a custom rom such as cm10 or cm10.1.
Greetings,
Is there a way to locate the OTA update files from Verizon?
Background: I have a Pantech Marauder phone. It was previously rooted with ICS Root Unlocker 1.0. I'm an obvious noob, and I accepted the OTA update. I no longer have root, and I haven't been able to find any tools to tips that work anymore.
Idea: Build a custom ROM from the update if I can find the file.
I was thinking about trying my hand at putting together a custom ROM since I can't locate any for Pantech Marauder. There are several online requests for stock ROMs; however, those requests are unanswered. I was thinking that if I could at least get my hands on the update that was pushed to my phone then perhaps I could work with that following some guides for building custom ROMs.
Is there a way to find the OTA update file location online? Perhaps from Verizon for manual download (I've searched) or Google Code? I tried looking on my phone for the file; however, without root, I couldn't find it. I tried using file browsers and searching for files such as "update" and file types such as ZIP. I also tried search for S910LVWD211F.D1 (the update).
Or, am I completely out to lunch on this one?
Same here
Would be sweet to see a custom Rom
Hello. I have done quite a bit of searching, just can't find a similar enough post to tag on some questions. Sorry if this has been asked...but I did look over a month of posts, and google searching.
I have a Note 3 from September, rooted in October...not sure how I got it done...but I jumped the gun and unrooted it with SU thinking I would be able to OTA to 4.4.2. Nope!
So, I am stuck on 4.3.
My big question is how can I get to 4.4.2 with OUT starting over on the phone.
I guess this is a backup question. I have some settings turned on that indicate that a back up is going somewhere, but I can't confirm, and I don't know what all is backed up.
Pictures are backed up, but I would hate to lose them. They are on SD card anyway...so I realize I could take the card out, but something I read suggested I might lose even the micro-simm card contents. Not sure how that would be possible.
But what about things like Quick Notes, and S Note, and Contacts, and all of my apps that I have installed, and settings for those apps.
When I rooted back in October, it worked with out disrupting anything.
How can I get that to happen now WITH an upgrade to 4.4.2 AND getting it rerooted?
If I can't upgrade with out wiping it clean, I am probably going to stay put. So, then what is the best way to root to get "Wifi Tether Router" back working...as it is the only thing I need the phone rooted for.
Finally, what is the difference between NC5 and NC5D. I saw a recent post of somebody else asking it...but none of the replies gave an answer.
Thanks for any feedback.
I don't know if this will help, but you can give it a try. First, you might want to consider that you are where most of us are trying to get back to ( i.e. 4.3 with no KNOX !!! ). Ok, I would go to Samsung Firmware, and download the latest version of 4.4.2 NC5 to your PC. I would backup that copy of 4.3 on your device to your sdcard then if have an ext sdcard copy it there, or copy that backup to your pc. Most of your Pics and data should be in that backup, that you can copy back later with a file explorer like Root Explorer. Now do a factory wipe. Then take the NC5 zip you got from sammie and extract it to a file on your desktop this will change it to a .tar file. Find a copy of Odin v1.85 don't use the 3.09 version on the Samsung website if possible. Cool, reboot your device into download mode, start odin, plug in your device to your PC. Now, load that extracted file on your desktop into PDA odin, and click start. It will take minute to read Md5 then start installing. You will lose root and recovery !!! Your new bootloader will have KNOX 0x0. So, you will have to start over with the root process, but isn't that half the FUN !!! Chainfires v1.94 supersu will root NC5. As for the difference between NC5 and NC5D, It is my understanding they are the same. The D stands for a version of NC5 that was used by Samsung employees ( i.e. programmers and developers ) in the development of NC5. :fingers-crossed::fingers-crossed:
Lokerd, I see you have read my response. Great!!! I would add the you can root 4.4.2 NC5 several ways. As I said above Chainfires v1.94 SuperSu, and One click autoroot, and Towelroot for 4.4.2. All should root your device without tripping KNOX. However, as soon as you flash a new custom recovery like TWRP or Philz CWM ( my favorite ) it will trip KNOX. If you are out of warranty no biggie, besides you need a custom recovery if you want to get back to your 4.3 backup. ( By the way remember you need the same recovery (i.e. TWRP or CWM ) that you made the 4.3 backup with, now on NC5 just a newer version. This will make it easier to recover the 4.3 backup later. They say the most popular recoveries will recover each others backups, but that is rarely the case.
jimzweb1 said:
First, you might want to consider that you are where most of us are trying to get back to ( i.e. 4.3 with no KNOX !!! ).
Click to expand...
Click to collapse
Thanks for taking the time to reply! And to reply with such a nice well though out steps.
So...I should NOT being trying to upgrade? I can do that...just reroot and be done with this. I really don't want to risk having to lose info I have put on the phone, etc. A few new features is not going to be worth it. But, reading about improved 4g and wifi performance. Wifi calling is not important to me. But it would be nice to have the camera on the lock screen...but I bet I could find something that would do that the rooted phone I had.
So, let me ask this. If I do not care about KNOX, is the process you outlined above any easier?
Thanks!
Drew
lokerd said:
Thanks for taking the time to reply! And to reply with such a nice well though out steps.
So...I should NOT being trying to upgrade? I can do that...just reroot and be done with this. I really don't want to risk having to lose info I have put on the phone, etc. A few new features is not going to be worth it. But, reading about improved 4g and wifi performance. Wifi calling is not important to me. But it would be nice to have the camera on the lock screen...but I bet I could find something that would do that the rooted phone I had.
So, let me ask this. If I do not care about KNOX, is the process you outlined above any easier?
Thanks!
Drew
Click to expand...
Click to collapse
Well, if you are out of warranty, and you don't care about KNOX go ahead and upgrade. But, consider this: One, so where clear the only reason for the 4.3 backup is to get to your pics and data at a later time. Here is a link about trying to go back http://forum.xda-developers.com/showthread.php?t=2630514 Once you install 4.4.2 NC5 ( this will include a new kernel, bootloader, baseband, and OS ) you CANNOT go to back to 4.3. If you try to install the 4.3 backup after you have upgraded to NC5 you will soft brick your phone. Then, there's KNOX what is KNOX, KNOX is security software written by the NSA for Samsung. Now I'm not saying its spyware, but Samsung is !!! You can go to Samsung's website and all the info about KNOX you need is there.
To answer your last question, no. You have to go through all the motions.
If it was me, knowing what I know now. I would stay at 4.3, install an engineering bootloader (read up on bootloaders they are not forgiving if you mess up ) then try to upgrade basebands. Here is a link for NAB engineering bootloader which should be 4.3, http://forum.xda-developers.com/showthread.php?t=2655674 Here is the link for a NC5 baseband, http://forum.xda-developers.com/showthread.php?t=2701837 I believe this will improve your 4G lte.
Last, what I'm running. I run Note 3 "Sprint" 4.4.2 NC5 ( no choice bought the device new with that OS, voided my warranty the second day I owned it ). Rooted with Philz CWM recovery ( hltespr v 6.12.9 ) KNOX disabled and removed. I definitely like 4.4.2 NC5 a lot better than 4.3 my daughters Note 3 had 4.3 before I upgraded to 4.4.2 and rooted it. Here is my XDA website http://forum.xda-developers.com/showthread.php?t=2770729 so if you do upgrade this is a good place to start.
Ok. Sorry for more noob questions.
Ok, the only thing I want to ensure is that I don't lose things like S Note, Action Memo, Contacts, Pictures, apps installed. I just don't want to redo everything. Basically, I just want to upgrade the operating system and have everything up and running like it was...just new OS. Is that possible? I understand what you are saying about not being able to use the back up. I guess I just don't understand if I can upgrade this phone with out having to start back over with everything.
I am not out of warranty (purchased October 2013), but I don't see that it would be a problem. I normally don't break or drop my phone...although I did drop it and picked up a nick a few weeks ago. It was unusual circumstances. Point is...I guess I will worry about warranty issues if that comes up. On the other hand, the home button is a getting a little finicky, so I avoid it...using swipe down, and a notification toggle to go to Home whenever possible.
I don't understand the difference between bootloader vs. flashing vs. upgrading basebands vs. rooting as opposed to those other things. it doesn't help that there are multiple ways to do each of the above.
I think I am in over myhead.
Can you help me figure out what I had done before...as it was working pretty good. I Rooted it to get root access, but not sure how I did it. It was easy, and it didn't erase anything. I think I simply used Odin. Attached is a screenshot of a folder of stuff that I might have used. Can you tell what root method I used?
I think I am just going to go back to what I had...and still with 4.3. I actually looked at my wife's identical phone that is on 4.4.2 and other than wifi calling, I don't see the camera on lock screen, so I don't really think I should be messing with stuff I can't wrap my mind around trying to get to 4.4.2.
lokerd said:
Ok. Sorry for more noob questions.
Ok, the only thing I want to ensure is that I don't lose things like S Note, Action Memo, Contacts, Pictures, apps installed. I just don't want to redo everything. Basically, I just want to upgrade the operating system and have everything up and running like it was...just new OS. Is that possible? I understand what you are saying about not being able to use the back up. I guess I just don't understand if I can upgrade this phone with out having to start back over with everything.
I am not out of warranty (purchased October 2013), but I don't see that it would be a problem. I normally don't break or drop my phone...although I did drop it and picked up a nick a few weeks ago. It was unusual circumstances. Point is...I guess I will worry about warranty issues if that comes up. On the other hand, the home button is a getting a little finicky, so I avoid it...using swipe down, and a notification toggle to go to Home whenever possible.
I don't understand the difference between bootloader vs. flashing vs. upgrading basebands vs. rooting as opposed to those other things. it doesn't help that there are multiple ways to do each of the above.
I think I am in over myhead.
Can you help me figure out what I had done before...as it was working pretty good. I Rooted it to get root access, but not sure how I did it. It was easy, and it didn't erase anything. I think I simply used Odin. Attached is a screenshot of a folder of stuff that I might have used. Can you tell what root method I used?
I think I am just going to go back to what I had...and still with 4.3. I actually looked at my wife's identical phone that is on 4.4.2 and other than wifi calling, I don't see the camera on lock screen, so I don't really think I should be messing with stuff I can't wrap my mind around trying to get to 4.4.2.
Click to expand...
Click to collapse
Cool, your version of 4.3 should be NAB and no KNOX. If this is the case then you should be able to root, and return back to stock, if you have say a hardware issue with your device and have to return it under warranty. So, according to your last post image on 10/24/2013 you used CF Autoroot, if you want to read up here is the link to that http://forum.xda-developers.com/showthread.php?t=2466423
Now to get to the latest version of CF Autoroot you need to go to ChainFires ( CF ) repository here is the link http://autoroot.chainfire.eu/ just find the model of your phone and click on File to download. Put that file on your desktop, now go to your android downloads copy and paste Odin v1.85 to your desktop. Click on Odin extract, and open it, now click on PDA a box will open, now select desktop and click on CF Auotroot. It should come up in Odin next to PDA. Now boot your device into download mode, then connect to your PC. In the upper left hand box will light up COMM: with some number in green, blue, or yellow doesn't matter just telling you that a connection was made. Now click start on the bottom of Odin, sit back and watch the magic!
When it says pass your done. Now reboot your phone if doesn't do it by itself go to your app drawer and see if SuperSu is there. To install the Recovery just follow the same steps just substitute the recovery .tar file in place of CF Autroot. I see you have ChainFires v1.65 SuperSu the latest version is v2.01 here is the link http://forum.xda-developers.com/showthread.php?t=1538053. If you use CF Autoroot it will probably install the latest version of SuperSu automatically.
I see on 10/25/2013 you downloaded CWM recovery for hltespr ( sprint ) here is the link for Philz CWM http://forum.xda-developers.com/showthread.php?t=2596001 the latest version for sprint is 6.12.9 I don't use his unified all in one recovery version, I use the sprint version, but the choice is yours. :fingers-crossed:
jimzweb1 said:
Cool, your version of 4.3 should be NAB and no KNOX.
Odin v1.85 to your desktop.
Click to expand...
Click to collapse
Thanks for the continued help. Just about ready to reroot the thing.
So, you mention using 1.85...is that only because that is what I have? The latest CF-Auto-Root came with 3.07 but I had already downloaded 3.09 a couple of days ago trying to figure stuff out. I also saw a warning about using the latest Odin...but I think it applied to trying to do the Kindle Fire, which I determined was 3.3 and not able to be rooted with out a special cable, which I have ordered.
Anyway, does it matter if I use the 3.07 that came with the latest version of CF-A-R? Should I use 3.09? Or def stick with 1.85.
EDIT #5: I end up using 1.85 and the original Root, then the new ROOT. So, does it matter that I used the Root from October vs the newest one or older Odin vs. newer? I have it up now, so it is just a matter of tryingt o figure this out.
BTW, I thought I had bricked my phone...went back and read YOUR instruction again, and got it restarted. The instructions on the main CF-A-R thread do not make it very clear.
Thanks a bundle!
Great !!! It doesn't matter which version of Odin you use, as long as it gets the job done. As for CF Autoroot, after your done rooting and boot the device back up. It my take awhile but you will automatically be asked update your apps, and SuperSu will update binarys at that time.