[KERNEL][4.4.3] ★☆ Kangaroo Kernel ☆★ 21 OCT | v072 | 3.4.104 - One (M7) Original Android Development

Kangaroo Kernel for the HTC One GSM: Sense ROMs
Linux 3.4.104+, with many features and improvements from Linux 3.12 and 3.14
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For android 4.4.3 Sense ROMs
Based off HTC 6.09.401.5 sources for 4.4.3 Sense
Code:
* Standard disclaimer:
* Your warranty is now void. Use at your own risk.
* In other words: It is your choice to use this software,
* I am not responsible for any damage or problems!
Naming convention
KANGAROO KERNEL MKIV IS FOR 4.4.3 ONLY (it will have _443 at the end of the filename)
JOEY AOSP CM (ckxxx): AOSP/CM based ROMs depreciated
JOEY GPE (post 4): sense based 4.4.2 and GPE 4.4.2 depreciated
KANGAROO KERNEL SENSE (kkxxx): sense based 4.4.2 ROMs and GPE only depreciated
Click to expand...
Click to collapse
Features:
Compiled with latest Linaro Christopher83 Linaro 4.9.1 toolchain
Better performance and battery savings due to the use of more efficient algorithms and updated, optimized code
Kernel is aimed at reducing heat while saving battery and increasing performance over stock
IN DEPTH FEATURE LIST IN CHANGELOG AND ON GIT
Better to look at changelog cause I miss things when I try to condense it
CPU governors (italics for default): ondemand, preservative, smartmax, optimax, performance, userspace, msm-dcvs, powersave
io sched: no-op, deadline, CFQ, BFQ, FIOPS
KANGAROO CONTROL SCRIPT IN POST #3
Can be used to control all options, plus more
Click to expand...
Click to collapse
Installation:
1. Download kernel
2. Reboot to recovery
3. Backup
*if you come from faux or tbalden please reflash your rom, you don''t need a wipe. They have some trickery with their own hotplugs so they have reomved mpdecision, so without reflashing your phone will be stuck on quad core*
4. Flash kernel
5. Reboot
*Please let it sit for ~10 mins before judging as it will need to settle down. Do not judge battery life unless you've run it through at least 3+ cycles after flashing*
Click to expand...
Click to collapse
DISCLAIMERS:
1) Excessive under/overvolting can cause damage to the internal parts of your phone. It can cause the phone's lifespan to deteriorate quickly so make sure you know boundaries
2) If you OC'ed/OV'ed/UV'ed and now are in a boot loop or your phone is slow, or acting weird or just died - it means your phone does not like the changes. Voltage control is for those who know what the risks are, know what they are doing and know how to fix it. Perhaps when you change these, test them for an hour or so before setting on boot
3) Any changes to the phone, including flashing the kernel itself is done at your own risk.
4) Every phone is differentt
5) Please DO NOT use any task killers (or additional init.d scripts), they DO NOT improve performance/battery. The kernel is designed to be used with stock settings: my settings and anything else can cause problems
Click to expand...
Click to collapse
Download latest version:
http://forum.xda-developers.com/showthread.php?t=2564895&page=662#post56167960
If you want logo options:
http://forum.xda-developers.com/showpost.php?p=54759427&postcount=5140
Previous versions (4.4.2):
http://www.androidfilehost.com/?w=files&flid=15247
Previous 4.4.3 version found in my changelog links. They are attached to each changelog post
Sauce: https://github.com/poondog/kangaroo-m7-mkIV
*Please do not re upload without permission, I like to count downloads*
Changelog will be in post 2
What is not coming via requests:
- replacement for mpdecision
- additional useless governors
- aroma
- anything useless: this kernel was made for me and I shared it with a few people until now
Click to expand...
Click to collapse
With thanks to (in no particular order)
franciscofranco
faux123
anarkia1976/ak
imoseyon
flar2
teamseven
n3ocort3x
morfic
maxwen
labodj
ktoonsez
tpbklake
janarp
szezso
Synthetic.Nightmare
ZeroInfinity
Sabermod team
Stratosk
Lens-F
Savoca
tiny4579
neniick
geko95gek
Click to expand...
Click to collapse
XDA:DevDB Information
Kangaroo Kernel, Kernel for the HTC One
Contributors
poondog
Kernel Special Features:
Version Information
Status: Stable
Created 2013-12-11
Last Updated 2014-10-20

---

Changelog: sense kernel
Changelog will go here
4.4.3 Sense kernel:
Code:
*****v072*****21 October*****
.cleaned up MAKEFILE kernel build flags
.some power efficiency enhancement patches, picked from NVIDIA for a15 devices (for greater battery life)
.reverted some msm_hsic_wakelock patches to try to reduce wakelocks (to improve standby times)
.introduce userspace voltage control (min is 650mV)
.some upstream patches for compression
.optimize memcpy for cortex-A15 to memutils (xboxfanj, this is for overall efficiency)
.some Cortex-A15 optimization patches from NVIDIA
.more minor under the hood stuff as always
http://forum.xda-developers.com/showthread.php?t=2564895&page=662#post56167960
*****v068*****04 October*****
.Update toolchain to Linaro 2014.09 4.9.2 for a15 chipsets by Christopher83
.some updates to SELINUX (to do with security)
.introduce OPTIMAX governor (see below)
.introduce PRESERVATIVE governor (see below)
.introduce SMARTMAX governor (see below)
.GPU overclocking (see below)
.imported ULTRASOUND_B sound drivers (see below)
.upstream Linux update to 3.4.104
.allow stock EXFAT and CRYPTO modules to work (thx to bgcngm from dual sim m7, this is experiemental since idk if it works)
http://forum.xda-developers.com/showthread.php?t=2564895&page=636#post55825791
*****v058*****14 September
.shorten some wakelocks (for better sleeping)
.some more tweaks for better overall battery and performance
.upstream fixes and improvements to TOPOLOGY drivers (to do with queuing of tasks to individual cores, from Linaro)
.optimize TOPOLOGY further for Krait devices (neobuddy89)
.introduce BFQ IOSCHED v7r5
.introduce FIOPS IOSCHED (default)
.enable ILLINOIS to be set as default, and set it default for TCP
.introduce LINARO POWER EFFICIENT WORKQUEUES (heaps of battery savings)
.some fixes to bluetooth
.upstream backports to EVENTPOLL subsystem from 3.14+ (Efficient event retrieval implementation, thx neobuddy)
.fix some more compile warnings for better optimized code (cl3kener)
.drop i2c clock a bit more (to save battery, ref. @zeroblade1984/Samsung/OPPO
.remove some more debug (less energy waste)
.strip most debug from modules, reduce size by 90%
.enable all sleep states, based on 4.4.2 kernel tests (for better battery especially in sleep)
.remove depreciated sched sysfs since they are removed up upstream kernels and don't really do anything
.some LINARO ARM code improvements
.update to HTC 6.09.401.5 kernel source (not much really lol, a few internet related fixes)
.introduce USB FAST CHARGE (flar2, off by default)
.cleanup some HTC junk
.some improvements to LOWMEMORYKILLER from moto/upstream (to do with multitasking)
.some improvements to ONDEMAND governor for better power savings with no smoothness loss
.fixed USB DAC audio (Thanks @hq5 for testing)
.introduce KEXEC_HARDBOOT aka MULTIROM (still needs patched RAMDISK, I do not include this)
.fix compass on Sprint and Verizon (brymaster5000)
.add some more doge
http://forum.xda-developers.com/showpost.php?p=55423362&postcount=5983
*****v045*****6 September*****
.2w: change feedback slightly, now it doesn't vibrate heaps on sweep2sleep
.further updated workqueue (for better battery and efficiency)
.some network tweaks
.heaps of "under the hood" improvements (lead to better efficiency for speed/battery)
.reduce internal USB wakelocks to improve battery
.patched kernel futex vulnerability (from CM, for security)
.compress with LZ4 for faster boot speeds and built with latest binary
.updated all compressors to latest versions
.add lower GPU frequencies and scale to them (for better battery)
.upstream backports to OOM handler from 3.16+ (related to memory use, see here https://www.kernel.org/doc/gorman/ht...rstand016.html)
.optimized deadline scheduler for better use on flash
.quad core cpu stats (faux123)
.lower max i2c clock to 384MHz to save some juice, no negative effects in testing
.some general code fixes and improvements
.enable ILLINOIS tcp algorithm and set default
.enable NTFS r/w support
http://forum.xda-developers.com/showthread.php?t=2564895&page=582#post55259490
*****v027*****30 August*****
.massive improvements to the workqueue, synced with AOSP+ (franciscofranco)
.BCM4335: attempt to decrease wakelocks
.signature tweaks to SLIMBUS (me/zeroinifity)
.msm: memutils: memcpy, memmove, copy_page optimization from motorola
.use freezable blocking calls kernel wide (for more efficiency and less waste of resources, comes from upstream android)
.slimmed down kernel, stripped of some things it doesn't need
.removed some more debugging
.much under the hood tweaks (wow)
http://forum.xda-developers.com/showpost.php?p=55136831&postcount=5636
*****v021*****22 August*****
.2w: default to sweep2wake and doubletap2wake on
.backport RANDOM and RANDOM32 drivers from Linux 3.16. FULL port, not just a few patches
.patch all the way to Linux 3.4.103 latest. These include bugfixes, enhancements that have been seen fit to be merged into the mainline 3.4.y kernel
.scale L2 and CPU in sync, up to 1134MHz where the L2 maxes out. Results in smoothness at higher freqs and battery saving at lower
.begin to work on workqueue, for now just a few fixes
.drop all CPU voltages by 50mV for battery improvement and heat reduction
.begin to tweak kernel to be cooler and leaner
http://forum.xda-developers.com/showthread.php?p=54976133#post54976133
*****v006*****5 August*****
.patch upstream to 3.4.25
.introduce all 2w features from Kangaroo Kernel 4.4.2, including dt2w, s2w, bi-directional etc
.button backlight notifications (tbalden)
.tweak makefile flag optimizations based on our testing on 4.4.2 Sense
.some minor fixes and enhancements
.disabled systemrw protection (Tiny4579)
http://forum.xda-developers.com/showthread.php?p=54619213&highlight=update#post54619213
*****v001*****29 July*****
.few compiler tweaks based on what worked well on 4.4.2 kernel
.some minor code optimizations and fixes
.compile with Christopher83 Linaro 4.9.1 2014.07 toolchain
.vfp with neon hard optimization levelz
http://forum.xda-developers.com/showpost.php?p=54454303&postcount=4973

---

Recommended settings
Recommended settings: balance between performance and battery
Trickstermod recommended
TCP congestion: ILLINOIS
Read ahead buffer: 128
IO scheduler: FIOPS(default settings)
CPU min freq: 384MHz
CPU max freq: 1728MHz
CPU governor: ondemand (default settings)
mpdecision: on
GPU gov: ondemand
GPU max freq: 487.5MHz
VOLTAGES: default, since its been tried and tested
PNPMGR: on
Click to expand...
Click to collapse
Officially supported ROMs (the kernel is tested on these)
.ViperOne 7.0.0 (6.09.401.5 base)
.MaximusHD 44.0 (6.09.401.5 base)
Click to expand...
Click to collapse
__________________________________________________________________
--------------------------------------------------------------------------------------------------------------
OFFICIAL KANGAROO KERNEL INIT.D SCRIPT: ALL YOUR NEEDS ON BOOT WITHOUT THE NEED OF AN APP!
HUGE thanks to Headless_monkeyhunta96, hit his thanks button!
DOWNLOAD IT FROM HERE
If you're gonna use the script.. Leave the name intact and give credits to poondog/headless_monkeyhunta96 where due
Click to expand...
Click to collapse

---

Joey Kernel CM for HTC One
Joey Kernel CM for HTC One
CM/AOSP based ROMs​
android_kernel_htc_msm8960 core from CM​
Features:
Compiled with latest Linaro Christopher83 Linaro 4.9.1 toolchain
Better performance and battery savings due to the use of more efficient algorithms and optimized code
Optimized configuration: stripped of wasteful debug and things that are useless on android phones
Patched to latest upstream Linux 3.4.y
Build/memory optimizations
CPU undervolted by 50mV
Userspace voltage control
msm_thermal from showp1984 tuned for med-cool
Advanced TCP algorithms (westwood default)
Backports from CAF/upstream
Stripped a lot of debugging
memutils: memcpy, memmove, copy_page optimization (moto)
enhancements and fixes from motorola open source repos
out of memory and memcontroller updated from Linux 3.14+ (neobuddy)
kernel mode NEON
use freezable blocking calls (faux123/CAF for improved efficiency and battery savings)
generic strnlen_user() function used in many instances
compressed with LZ4
L2 clocks synced with CPU clocks
Linaro Power Efficient Workqueues
slimbus backport from Nexus 5
CAF updates to slimbus
slimbus OC MKII+some more tweaks (Poondog/ZeroInfinity)
ported HTC ONDEMAND, PERFLOCK, ADAPTIVE TUNING, IDLE STATS and PNPMGR for optimium battery and smoothness
CPU governors (italics for default): preservative, conservative, smartmax, ondemand, performance
io sched: no-op, deadline, CFQ, ROW, FIOPS
Click to expand...
Click to collapse
Download latest version:
http://forum.xda-developers.com/showpost.php?p=54132749&postcount=4432
see here for more details:
http://forum.xda-developers.com/showthread.php?p=53561527
http://forum.xda-developers.com/showpost.php?p=54132749&postcount=4432
Kernel sauce:
https://github.com/poondog/android_kernel_htc_msm8960
Changelog:
Code:
*****14 July*****
.continue porting of HTC perflock, adaptive tuning, idle_stats (me/htc)
.merge upstream CM kernel
.merge upstream CAF
.some device specific changes from CM
*****21 June*****'
.bumped readahead to 512kb max
.build with new toolchain 2014.06 Christopher83 Linaro 4.9.1
.Update to latest 3.4.94
.squashed some build warnings
.improve cpuidle from Kangaroo Kernel logic
.merge with latest CM, includes many driver updates
.begin port of PNPMGR from Sense source (tiny4579)
.port HTC ondemand gov from Sense source complete with multiphase and all HTC goodness. Uses input boost interface hoocked with cpufreq. Results in more smoothness and better battery in comparison to CAF ondemand due to boost freqs (me/HTC)
.update vibrator drivers from Sense source (me/HTC)
.some fixes from Kangaroo Kernel
.improved boot time by init to max (moto)
.backported SLIMBUS from Nexus 5 source
.merged CAF updates for Slimbus for the latest drivers, minus the qmi parts which we don't have hardware for
.slimbus tweaks are back (me/Zeroinfinity)
*****15 June*****
.so update
.introduce Linaro Power Efficient workqueues
.upstreamed oom to Linux 3.14+
.sync with latest CM/CAF
.sync with latest kernel.org 3.4.93
.introduce BFQ-v7r4-3.4 with Early Queue Merge
.introduce FIOPS scheduler core
.some enhancements to the block subsystem (to do with scheduling)
.add 3 phase BRICKED thermal, used defaults from Kangaroo Kernel (thx showp1984)
.introduce userspace voltage control (same implementation in Kangaroo Kernel, from myfluxi)
.introduce PRESERVATIVE cpu governor, sync with latest and Kangaroo defaults
.Introduce SMARTMAX cpu gov, also synced with latest and Kangaroo defaults
.squash conservative governor from upstream as used in Kangaroo
.build with Christopher83 4.9.1 2014.05 toolchain with build flags from Kangaroo
.motorola memory enhancements
.bumped readahead max to 512kb
.introduce slimbus OC from Kangaroo Kernel
.sync L2 clocks and CPU clocks up to 1134MHz
.drop voltages by 50mV
.much under the hood stuff that I can't write in english
.wow

---

Kangaroo Kernel MKIII for 4.4.2 Sense
(depreciated)
RIP​
Kangaroo Kernel for the HTC One GSM: Sense ROMs
Linux 3.4.103+, with many features and improvements from Linux 3.12 and 3.14
For android 4.4.2 Sense ROMs
Based off HTC 5.11.401.10 sources for 4.4.2 Sense
Code:
* Standard disclaimer:
* Your warranty is now void. Use at your own risk.
* In other words: It is your choice to use this software,
* I am not responsible for any damage or problems!
Naming convention
KANGAROO KERNEL SENSE (kkxxx): sense based 4.4.2 ROMs and GPE only
JOEY AOSP CM (ckxxx): AOSP/CM based ROMs--> every rom not based on Sense or GPE
JOEY GPE (post 4): sense based 4.4.2 and GPE 4.4.2 depreciated
KANGAROO KERNEL MKIV IS FOR 4.4.3 ONLY (it will have _443 at the end of the filename)
Click to expand...
Click to collapse
Features:
Compiled with latest Linaro Christopher83 Linaro 4.9.1 toolchain
Better performance and battery savings due to the use of more efficient algorithms and optimized code
Optimized configuration: stripped of wasteful debug and things that are useless on android phones
Patched to latest upstream Linux 3.4.y
Build/memory optimizations
Utilize all possible CPU sleep states
CPU undervolted by 50mV
Overclock GPU to 487MHz
Userspace voltage control
CPU stats (quad core)
custom thermal driver for optimum control over cpu temperature and throttle
powersaver cpu cap in-kernel to cap max freq without disabling pnpmgr
Scheduler improveents
Slimbus OC!
Audio tweaks and improvements
ULTRASOUND_A from latest CAF source
Advanced TCP algorithms (westwood default)
GPU tweaks, underclocked with freqs 27, 128, 200, 320, 400, 487MHz
Increased GPU BUS bandwidth
Backports from CAF/upstream
Stripped a lot of debugging
SELINUX up to date with latest Google source
memutils: memcpy, memmove, copy_page optimization (moto)
enhancements and fixes from motorola open source repos
msm: dma: upstreamed to CAF
kernel RANDOM number generator from Linux 3.16+ (dorimanx)
out of memory and memcontroller updated from Linux 3.14+ (neobuddy)
eventpoll updated to Linux 3.14+
ext4: upstreamed to latest CAF
qdsp6v2 audio format drivers from latest CAF
mm: optimized KSM
upstreamed random32 drivers to Linux 3.16+
kernel mode NEON
update/ optimize mutex functions (faux123/CAF for improved multitasking
use freezable blocking calls (faux123/CAF for improved efficiency and battery savings)
generic strnlen_user() function used in many instances
support kernel side for f2fs (Samsung--> needs ramdisk support, see your rom "chef")
implement kexec_hardboot aka multirom support in kernel (again needs ramdisk support)
tcp small queues, early retransmit, auto corking, speed tweaks
reduced wifi wakelocks
2w options (s2w, dt2w, l2m etc: flar2, default s2s/dt2w bottom of screen)
bi-directional sweep2wake
compressed with LZ4 binary r120
L2 clocks synced with CPU clocks
BUS tweaks and updates
reduced HSIC wakelocks
Linaro Power Efficient Workqueues
Linaro CPU topology, updated and enhanced for Krait CPUs
USB force fast charge
slimbus OC MKII+some more tweaks (Poondog/ZeroInfinity)
MORE IN DEPTH FEATURE LIST IN CHANGELOG AND ON GIT
CPU governors (italics for default): preservative, conservative, smartmax, ondemand, performance, userspace, msm-dcvs, powersave
io sched: no-op, deadline, CFQ, ROW, FIOPS, BFQ, SIO
KANGAROO CONTROL SCRIPT IN POST #3
Can be used to control all options, plus more
Click to expand...
Click to collapse
Installation:
1. Download kernel
2. Reboot to recovery
3. Backup
*if you come from faux or tbalden please reflash your rom, you don''t need a wipe. They have some trickery with their own hotplugs so they have reomved mpdecision, so without reflashing your phone will be stuck on quad core*
4. Flash kernel
5. Reboot
*Please let it sit for ~10 mins before judging as it will need to settle down. Do not judge battery life unless you've run it through at least 3+ cycles after flashing*
Click to expand...
Click to collapse
DISCLAIMERS:
1) Excessive under/overvolting can cause damage to the internal parts of your phone. It can cause the phone's lifespan to deteriorate quickly so make sure you know boundaries
2) If you OC'ed/OV'ed/UV'ed and now are in a boot loop or your phone is slow, or acting weird or just died - it means your phone does not like the changes. Voltage control is for those who know what the risks are, know what they are doing and know how to fix it. Perhaps when you change these, test them for an hour or so before setting on boot
3) Any changes to the phone, including flashing the kernel itself is done at your own risk.
4) Every phone is differentt
5) Please DO NOT use any task killers (or additional init.d scripts), they DO NOT improve performance/battery. The kernel is designed to be used with stock settings: my settings and anything else can cause problems
Click to expand...
Click to collapse
Download latest version:
http://forum.xda-developers.com/showthread.php?p=54937723
All previous versions:
http://www.androidfilehost.com/?w=files&flid=15247
Sauce: https://github.com/poondog/kangaroo-m7-mkIII
*Please do not re upload without permission, I like to count downloads*
Changelog will be in post 2
What is not coming via requests:
- replacement for mpdecision
- additional useless governors
- aroma
- anything useless: this kernel was made for me and I shared it with a few people until now
Click to expand...
Click to collapse
With thanks to (in no particular order)
franciscofranco
faux123
anarkia1976/ak
imoseyon
flar2
teamseven
n3ocort3x
morfic
maxwen
labodj
ktoonsez
tpbklake
janarp
szezso
Synthetic.Nightmare
ZeroInfinity
Sabermod team
Stratosk
Lens-F
Savoca
tiny4579
neniick
geko95gek
Click to expand...
Click to collapse
Code:
CHANGELOG:
*****v138*****20 August*****
.patch to upstream 3.4.103
.overclock the GPU to 487MHz. I added an extra step, not replaced what we had (see below)
.disable some more debug (less wastage of energy for greater battery life)
.disable F2FS, who even knew it was here anyway
.updates to kernel processes from CAF/upstream
.lower max i2c clock to 384KHz, to save battery
.minor updates to ONDEMAND gov from tiny4579/stratosk
.import ULTRASOUND audio drivers from latest CAF. We are using ULTRASOUND_A, made for msm8960 (improves audio playback)
http://forum.xda-developers.com/showthread.php?p=54937723
*****v132*****12 August*****
.cleaned up touchscreen drivers and removed whitespaces
.build version is changed slightly to show kangaroo kernel mkiii, to differentiate between 4.4.3
.cleaned up thermal drivers since last release
.some changes to thermal algorithm to be more reliable and more accurate
.tuned thermal for a bit cooler (see below)
.remove some debugging in sched (less wasted energy)
.misc optimizations/updates for compression/decompression (more reliable, ref. cl3kener git)
.misc optimizations/updates for CPUFREQ
.updated RANDOM32 driver from Linux 3.16.y kernel
.updated RANDOM driver from Linux 3.16.y kernel (see below, ref. dorimanx git)
.ported new random driver for use on m7 s600 (me)
.cleaned up vibrator driver (more optimized and usable code now)
.lower default 2w vibration to 18, down from 20
.SMARTMAX: use new relation_C to better choose frequencies
.PRESERVATIVE: use new relation_C to better choose frequencies
.upstream improvements to kernel sync drivers (effects general operations, and io related things)
.upstream improvements to sched (will effect general performance and battery)
.updated LZ4 kernel compression binary to r120
.merge upstream Linux kernel 3.4.102
http://forum.xda-developers.com/showthread.php?t=2564895&page=527#post54771268
*****v122*****26 July*****
.thermal: bring in new thermal driver. Seems to have better control over freqs compared to before. Butchered it. Now we have some weird roo thermal beast. See below. (myfluxi, me)
.introduce powersaver cap for limiting cpu max freq (me, see below)
.patch to upstream 3.4.99 (kernel.org)
.2w: rewrote this is some places. Add support for bi-directional sweep2wake and sweep2sleep (thx @Savoca for a few pointers and the idea, flar for the original code, see below)
.compile with new toolchain 4.9.1 Christopher83 2014.07
.disable HTC write protection (thx Tiny)
.clean up some drivers of unneeded code
http://forum.xda-developers.com/showpost.php?p=54408387&postcount=4819
*****v116*****18 July*****
.update BFQ-v7r5 I/O sched for 3.4 complete with Early Queue Merge
.tune smartmax tunables for more battery (thx @Rad Ryan)
.fixed sound issues from v110
.merge upstream Linux 3.4.98
.updates to lz4 kernel side code
.updated to lzo kernel side
.new freq relation for Ondemand gov adapted for HTC Ondemand(stratosk, see below)
.tune deadline iosched for better performance (myfluxi)
.some updates merged from Nexus 7 L preview
http://forum.xda-developers.com/showpost.php?p=54226594&postcount=4555
*****v110*****8 July*****
.backported futex updates and fixes (for vulnerability, cred kernel.org/CM)
.some fixes for gpu
.updates to Linaro topology
.add Krait specific topology values (for cpu efficiency, neobuddy89)
.fix all audio bugs. ALL OF THEM
.mutex enhancements from v085 (CAF)
.disabled some useless govs, you won't even notice them missing :P
.enable all PM sleep states (see below)
.updated installer script for all devices. Delete thermal and thermal backup files on flash *IF YOU FLASH ANOTHER KERNEL REFLASH ROM FIRST* (thx @Ser35) Remember we have custom kernel side thermal manager so all g
.update LZ4 binary to latest r119 (to do with kernel compression)
.patch to latest Linux 3.4.97
http://forum.xda-developers.com/showpost.php?p=53972164&postcount=4222
*****v100*****23 June*****
.base 5.11.401.10 (m7ul-3.4.10-g3c4bd25 )
.throttle earlier
.fixed audio bugs
.import conservative gov from 3.15+
.patch to 3.4.94
.update toolchain to latest 2014.06 4.9.1 Christopher83
.some under the hood stuff
.revert some stuff from v085 since it caused issues
http://forum.xda-developers.com/showpost.php?p=53611734&postcount=3948
*****v085*****8 JUNE*****
.misc updates to congestion stuff and sched (for greater efficiency and battery)
.fix bluetooth for Sprint and Verizon (thx Brymaster)
.thermal: a bit cooler on the higher phases
.cpufreq: ported CONSERVATIVE gov from Linux 3.14+ (stratosk, kernel.org)
.improvements to memory model section of kernel (to do with processing stuff)
.mutex enhancements from CAF
.update SELINUX from 4.4.3 google source (kernel side security)
.some misc updates from google 4.4.3 source
.under the hood stuff (see git)
http://forum.xda-developers.com/showthread.php?p=53243483
*****v077*****31 MAY*****
.updates to msm_bus for better performance, particularly in gaming
.support Sprint and Verizon (will link their threads later)
.enabled all thermal devices
.support 3 phase bricked msm_thermal (showp1984)
.port thermal to our setup
.setup thermal for pretty cool: see below
.support more TCP algorithms (for data congestion control)
http://forum.xda-developers.com/showpost.php?p=53047467&postcount=3372
*****v068*****26 MAY*****
.build with Linaro CR83 2014.05 4.9.1 toolchian (update from last months)
.upstream to Linux 3.4.91 (kernel.org)
.added preservative governor latest version, tweaked for m7 (bedalus, me)
.added smartmax governor, set m7 defaults (maxwen, me)
.added easter eggs
.reverted dubious sched changes that brought small stutter
.reverted cpuidle to stock to fix sleep times and battery (sorry )
.some misc fixes
.updated BFQ-v7r4 I/O sched for 3.4
.add Early Queue Merge (EQM) to BFQ-v7r4 for 3.4.0
http://forum.xda-developers.com/showthread.php?p=52912948
*****v059*****18 MAY*****
.idle the gpu properly
.decrease mmc wakelocks and time to enter deep sleep (tripnraver)
.update latest caf topology (to do with CPU behavior, Linaro/Synthetic.Nightmare)
.update lz4 compression binary to r117 and some tweaks to compression
.reduce wifi wakelock by a lot (Imoseyon, me)
.patch upstream to Linux 3.4.90
.disabled some crap from defconfig to make the kernel leaner
.complete backport of CPUIDLE from Linux 3.14 (see below)
.some device map fixes
http://forum.xda-developers.com/showpost.php?p=52736996&postcount=2964
*****v044*****9 MAY*****
.implement hashtable introduced in 2e41ba2df20f986b8ae722b9979a57e3ffe31f68 for moar drivers (efficiency)
.merged many rwsem patches from mainline Linux (to improve rw semaphores)
.userspace voltage control (myfluxi, see below)
.minor sound driver update
.build with Christopher83 Linaro 4.9.1 toolchain by default now
.cpufreq drivers rewritten in some places to be more logical and efficient (Linaro)
.some minor tcp tweaks (releted to data use)
.more tweaks to slimbus (see below)
.patch to 3.4.89
http://forum.xda-developers.com/showthread.php?p=52518763
*****v040*****2 MAY*****
.slimbus updates backported from latest CAF 3.5 for msm (audio playback)
.out of memory and memcontroller updated from Linux 3.14+ ((for multitasking/battery, thx neobuddy)
.enhancements to lowmemorykiller (improved multitasking)
.SLIMBUS overclocking MKII (see below) Poondog/@ZeroInfinity
.2W: updates from flar (not including gestures)
.cpuidle: update functions from CAF/Linaro for better idle
.update eventpoll to Linux 3.14+ too (Efficient event retrieval implementation, thx neobuddy)
.update BFQ iosched to v7r3 (fiops still default)
.remove some armv7 specifications
.some makefile changes
.patch upstream to 3.4.88
*****v033*****25 APR*****
.sched/fair: Optimize find_busiest_queue()
.sched/fair: Optimize cgroup pick_next_task_fair()
.USB Fast Charge (Chad Froebel, Motley, Flar2: default is off)
.update some qdsp6v2 audio format drivers to latest CAF
.WORKQUEUE: introduce Linaro Power Efficient Workqueues system wide (Linaro)
.backported 3.12+ kernel scheduler features/fixes/enhancements (faux123/kernel.org for better multitasking etc)
.more under the hood stuff (see git)
.reduce memory usage by input driver
.some kernel enhancements and fixes from motorola (Synthetic.Nightmare/Motorola)
.remove old slimbus drivers.
.ported slimbus drivers from HTC m8/Nexus 5 (same driver)
*****v027*****18 APR*****
.compressed kernel with LZ4 compression. Theoretically much faster decompression speeds, lossless compression. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO
.enable automatic process group scheduling
.overall stats: fix for quad core (faux123)
.Introduce BFQ-v7r2 scheduler for 3.4
.Introduce ROW scheduler and tune to franciscofranco values for mako/hammerhead
.Introduce FIOPS scheduler latest version (default scheduler)
.Introduce SIO scheduler
.ASoC: Propagate device HW delay to AFE, add buffer overflow check (aznrice)
.ACPUCLOCK: sync L2 cache speed to CPU speed up until 1134MHz. This improves smoothness by bumping the L2 speed up at required set boost freqs such as 918 and 1026MHz
.SELinux: Reduce overhead of mls_level_isvalid() function call (optimizations to SELinux picked from faux123 git)
.more under thehood code fixes improvements optimizations
.remove some debugging from device configuration
.undervolt all PVS versions by 50mV (should save some battery and heat)
.update to @Christopher83 Linaro 4.8.3 2014.04 toolchain, love your toolchains mate
.patch to Linux 3.4.87 latest
.some patched from mako devs to decrease the HSIC wakelock
*****v022*****11 APR*****
.patch to latest linux upstream 3.4.86 (kernel.org/gregkh, 3.4.y maintainer)
.kgsl: Fix Z180 memory leak
.2W: set dt2w default to fullscreen
.update/ optimize mutex functions (faux123/CAF for improved multitasking)
.use freezable blocking calls (faux123/CAF for improved efficiency and battery savings)
.generic strnlen_user() function used in many instances
.time: update some functions of timekeeping.c to latest CAF
.support kernel side for f2fs (Samsung--> needs ramdisk support, see your rom "chef")
.implement kexec_hardboot aka multirom support in kernel (again needs ramdisk support)
.implement memory optimizations into makefile (sparksco/sabermod team, this was the change in SEMEM test)
.add tcp small queues, early retransmit, auto corking, speed tweaks (anarkia1976, to do with networks/internet etc)
.board: reset to stock HTC spec, make thermal kick in earlier
.leds: set blink button notifications default
.build: replaced timeconst.pl with a bc script
.updater-script: tweaked progress bar, set permissions and delete system/lib/modules
*****v015*****7 APR*****
.msm: dma: upstreamed to CAF
.kernel random gen driver updated to Linux 3.14+ (faux123)
.ext4: upstreamed to latest CAF (mrg666/CAF)
.ASoC: increase buffer sizes for low latency audio playback
.block/partitions: optimize memory allocation in check_partition()
.mm: optimized KSM
.upstreamed random32 drivers to latest CAF to work with ext4 updates
.kernel mode NEON
.Enable NEON optimized crypto routines
.2w options (s2w, dt2w, l2m etc: flar2, default s2s/dt2w bottom of screen)
.build: add build flags simplified version with -O2 optimization (used to be -Os) as per testing. (stratosk)
.fixed boot issues for the people who had problems
*****v009*****1 APR*****
.optimizations to SLUB
.memutils: memcpy, memmove, copy_page optimization (from motorola: speed and battery)
.set LOAD_FREQ 4*HZ+61
.remove some more kernel debugging which is wastefuil for us
.switch do_fsync() to fget_light()
.increase BUS at lowest GPU freq
.some makefile tweaks
.Patch to upstream 3.4.20
.entropy tweaks in random (Imoseyon leankernel)
.some GPU tweaks from CM including scale GPU from 128MHz to 400 (instead of 200 min now)
*****v004*****29 MAR*****
.build with Linaro 2014.03 toolchain optimized for cortex a15 by @Christopher83.. he is a beast :P
.build optimizations in makefile and arch/arm/makefile
.some fixes for improved battery and performance (overall efficiency)
.removed a lot of debugging (wasteful when there are no issues to debug :P)
.some fixes to acpuclock-krait
.slimBUS OC from my Joey kernel @ZeroInfinity and me
.workqueue fixes
.enabled advanced TCP congestion algorithms (westwood is stock)
Joey Kernel for the HTC One GSM Google Play Edition 4.4.2
(depreciated)
RIP​
Linux 3.4.15+
For android 4.4.2 Google Edition ROMs.. (kk Sense too )
Based off HTC 3.62.1700.1 sources​
Features:
Compiled with latest Linaro 4.8.3 2013.11 toolchain
Baby version of Kangaroo Kernel. Contains most patches and features found in main Kangaroo Kernel.
Better performance and battery savings due to the use of more efficient algorithms and optimized code
Focused on battery life: freqs from 384-1566MHz capped for battery and optimimal performance in normal use.
Power management tweaks
Slightly undervolted: -50mV for PVS 0,1,2,3,4 and -25mV for PVS 5,6,7 (acpuclock identical to kangaroo)
Undervolted L2 clocks
Optimized configuration: stripped of wasteful debug and things that are useless on android phones
Optimized with -Ofast
Compressed with LZ4
CPU stats
CPU freqs cut down to stop confusing the governors etc: there is no point having freqs that are so similar when it behaves the same anyway
Faux sound control
Faux display color control!!!
Support for Multi ROM
Scheduler improvements
Random/entropy tweaks
Linaro power efficient workqueues
Linaro topology
Advanced TCP algorithms (westwood default)
ARM/VFP optimizations
Support for kernel mode NEON
Screen wake options: S2W/DT2W/L2M/L2W etc (flar2 implementation, s2s only is default)
Updated cpuidle
Updated freezer functions
Improvements to ondemand governor
USB fast charge
User voltage control
Optimized deadline IO sched: default
LED blink buttons
GPU improvements, underclocked with freqs 128, 200, 320, 400MHz
Backports from CAF/upstream
SLIMbus OC (me/ZeroInfinity)
SLIMbus updated from upstream
USB fast charge
Upstream updates to SLUB allocator
CPU governors (italics for default): ondemand, performance, conservative, msm-dcvs, smartmax, userspace
io sched: no-op, deadline, cfq
Click to expand...
Click to collapse
See OP for installation and disclaimers
Download latest version:
JoeyKernelGPE_30jan.zip - 8.68 MB
^WARNING THIS IS OLDDDDDDD
For GPE 4.4.2
but working on 4.4 Sense ROMs
*Please do not re upload without permission, I like to count downloads*
Sauce: https://github.com/poondog/joey-m7-GPE/
Changelog: Joey Kernel (4.4.2 GPE)
Code:
*****30 Jan*****
.sync and fsync enhancements
.disable some more debugging
.support LZ4 compression (thx @Synthetic.Nightmare for helping)
.compress zimage by LZ4, results in 9.7mb zimage (large lol) Should boot faster if my theories are correct, because decompression time is a lot less?
.ARM/VFP optimizations, see source for details. Support kernel mode NEON and enabled NEON optimized crypto routines (myfluxi)
.synaptics_3k: Do not hardcode pressure & width (Synthetic.Nightmare)
.synaptics_3k: Improve touchscreen sensitivity (Synthetic.Nightmare)
*****24 Jan*****
.fixup ASYNC_FSYNC declaration in kconfig (if anyone else is compiling.. thx tripnraver)
.backport sched updates from 3.4.77+
.arm: Allow CPU-supported unaligned accesses
.makefile: remove -marm flag, see if it makes any difference in smoothness
.switch back to in kernel thermal control, from tripnraver kernel (CAF/trip)
.made thermal throttle at around 55 degrees, to keep phone cool (its summer here) and battery lasts longer.
.introduce WHEATLEY governor. Ondemand is still default
.add ROW io scheduling algorithm, tune for our devices
.mm: optimizations to io
.mm: optimize Kernel Samepage Merging(KSM)
.mm: Squash a few SLUB commits from CAF
*****19 Jan*****
.undervolt L2 clocks by default by 50mV for better battery
.smoothed out BUS scaling (now uses 266MHz step instead of jumping from 200 -->400
.increase max/reduce min buffer size for playback of audio
.revert to stock thermal. Tweaked it a bit to throttle earlier.. HTC thermal is quite good on battery
.random/entropy tweaks (for better performance and battery, credits imoseyon/anarkia1976)
.fixed sleeping issue.. now it is better than before
*****16 Jan*****
.audio: remove handset pop-noise
.DRIVERS: CPUFREQ: revert to stock GPE ondemand governor, then tweaked it a bit again
.DEFCONFIG: compress with xz (smaller kernel/ faster boot)
.SLIMbus: updates from upstream/CAF
.ASoC: msm: qdsp6: Fix pop noise seen with touch tone during playback
.ALSA: PCM - Add PCM creation API for internal PCMs.
.SELINUX: update to 3.4.76+
.Set default 2w to dt2w, s2s, pocket detect, increase default vibration
.sched: set sched_mc_power_savings to 2 (try to restrict things to one core)
.import crpalmer/flar2 thermal. Thanks to them. Tweaked for battery and extra extra cool.
.remove some debug
.writeback updates from upstream
.remove faux color interface, was troublesome.. some new commits in his repo they don't boot for me :)
Audio, selinux, slimbus, thermal update mostly.. if you were hoping for something else sorry :)
*****8 Jan*****
.dt2w: sync with flar2 kernel, more sensitive, limit to bottom part etc (flar)
.attempted fix for wifi wakelocks (working for me in testing, what was minimal is even less now)
*****2 Jan*****
.Overclocked slimbus to max. This is as high as it goes, its 100% stable in testing with no negative impacts. Brings improvements all around for audio playback etc (thx to @ZeroInfinity and me :icon_bigg)
.Some generic function optimizations (for faster kernel, better battery.. overall improvements to the code, from CAF)
.Add USB Fast Charge (Flar, Motley, Chad Froebel for original mod)
*****28 Dec*****
.optimizations to cacheflush function (minimal under the hood stuff)
.updates to lowmemorykiller from Linux 3.10+ (syntheticnightmare)
*****24 Dec*****
.updated Linaro workqueues (battery savings)
.integrated linaro power efficient workqueues deep in the kernel (battery savings)
.color control
.patch to 3.4.15
.compile -Ofast
.selinux updates
.use Ste98B tunables for smartmax (thx mate)
*****17 Dec*****
.Initial release

---

...
Slightly undervolted: -50mV for PVS 0,1,2,3,4 and -25mV for PVS 5,6,7
...
Click to expand...
Click to collapse
Hey, mate, great work!
But, if I'm not mistaking, there is no PVS 7 and 0 is worst, whist 6 is best, so undervolting should be other way around?

---

Excuse the question, but it is because the majority of call recording applications are to pay, why developer no supports this feature in HTC one?
Enviado desde mi HTC One mediante Tapatalk

---

donmarkoni said:
Hey, mate, great work!
But, if I'm not mistaking, there is no PVS 7 and 0 is worst, whist 6 is best, so undervolting should be other way around?
Click to expand...
Click to collapse
Cheers
Sorry that was a typo lol
Yes you're right but this is how it has been done:
Since the voltage tables are different for all PVS versions, PVS 0 having the most voltage and 6 the least, 0 can handle -50mV compared to stock and still use more voltage and be stable, while still having more voltage than 6. Pushing 6 to more than what I have already done is risky since it is so low already, on a mass scale and I don't think I will do it unless it is proven stable
edit: https://github.com/poondog/kangaroo-m7-MKII/blob/exp/arch/arm/mach-msm/acpuclock-8064.c
Lo_RaT_PeNaT said:
Excuse the question, but it is because the majority of call recording applications are to pay, why developer no supports this feature in HTC one?
Enviado desde mi HTC One mediante Tapatalk
Click to expand...
Click to collapse
Probably. Looking at his/her sources there are no references to the One. The newest is for mako (Nexus 4)
In my point of view, there is no point for a kernel dev (learning or experienced) to spend time including something (could take hours) just to make someone else's payday when they really did nothing for the One. I might look into it if there is a free version with One support. If not I may be creating bugs for the dev on an unsupported device
In other news, 11 Dec build is up. Enjoy, please leave comments!

---

poondog said:
Cheers
Sorry that was a typo lol
Yes you're right but this is how it has been done:
Since the voltage tables are different for all PVS versions, PVS 0 having the most voltage and 6 the least, 0 can handle -50mV compared to stock and still use more voltage and be stable, while still having more voltage than 6. Pushing 6 to more than what I have already done is risky since it is so low already, on a mass scale and I don't think I will do it unless it is proven stable
edit: https://github.com/poondog/kangaroo-m7-MKII/blob/exp/arch/arm/mach-msm/acpuclock-8064.c
...
Click to expand...
Click to collapse
Oh, yeah, you're right, I understand. I know of different voltages for different PVS, just didn't realized you did it that way. Thanks for clarification.
Cheers!

---

donmarkoni said:
Oh, yeah, you're right, I understand. I know of different voltages for different PVS, just didn't realized you did it that way. Thanks for clarification.
Cheers!
Click to expand...
Click to collapse
No problem! Enjoy the kernel

---

just trying it out

---

rohorubo said:
just trying it out
Click to expand...
Click to collapse
Winky face?
Hope you like it, its been a while in the making.. I thought of stuff for like 6 months and finally when sources were out for 3.62 it started
Been a development ongoing since then
Sent from my Nexus 7 using XDA Premium 4 mobile app

---

Nice to see u here
More awesome kernels for us!!

---

nice to see a kernel from down under any plans for a 4.4 kernel in the near future

---

Trying it out!
Sent from my HTC One using XDA Premium 4 mobile app

---

Woot! Trying and reporting it now!
Thanks for your work!
Sent from my Nexus 7 using Tapatalk

---

There will be a version for 4.4 GPe?
Inviato dal mio HTC One utilizzando Tapatalk

---

very smooth thx!
Sent from my HTC One using Tapatalk 2

---

I think I might make the trip back to 4.3 and give this a try. Thanks for sharing!
Sent from my HTC One using XDA Premium 4 mobile app

---

please post screenshots under trickster mod