Hey all,
So, I've encountered multiple issues with my Archos 80 g9 lately.
Since I've had it for 2 years now, I know it has it's charming defects from time to time, but all of those were easy to fix.. until now.
Somehow, there is a dysfunction at the charger entry: My tablet only charges if the charger is slightly 'bent' to the left, which isn't so much of a problem on its own, but every time I want to use the device while its charging it keeps 'connecting' and 'disconnecting' the charger. I noticed that if this happens five or six times in a row, the device completely freezes, or just becomes extremely slow. I just don't want to open it up until I'm sure what is wrong.
Also, when I turned of the device last week, like a million times before (it was about 80% charged, btw) it just didn't want to turn on the day after. While I was pretty sure its battery wasn't drained I still tried to charge it: the green led turns on, and that's it.
No other sign of life, no reboot possible, the screen doesnt turn on and as soon as I remove the charger the led turns off and still nothing happens.
Any thoughts on this?
Regards,
mielman
It has been said before that the charger ports on these are not the best thought out. Apparently only held in place by the solder of the pins and nothing else. What it sounds like to me is that the solder joints on yours is starting to become undone. I've heard they are not the easiest to resolder for a DIY repair unless you're really good at it.
As far as the not waking up.. Are you sure the tablet is turning off all the way? I'm using a custom rom on my 101 g9 turbo and I notice that every so often the tablet won't turn off all the way... ie the power LED is still on even though the screen is blank. I have to hold in the power button to force it to turn off.
Djirin said:
It has been said before that the charger ports on these are not the best thought out. Apparently only held in place by the solder of the pins and nothing else. What it sounds like to me is that the solder joints on yours is starting to become undone. I've heard they are not the easiest to resolder for a DIY repair unless you're really good at it.
Click to expand...
Click to collapse
Then opening up the device it is.
As far as the not waking up.. Are you sure the tablet is turning off all the way? I'm using a custom rom on my 101 g9 turbo and I notice that every so often the tablet won't turn off all the way... ie the power LED is still on even though the screen is blank. I have to hold in the power button to force it to turn off.
Click to expand...
Click to collapse
Yeah, I'm pretty sure it is, since even holding the power butting for approximately 20 seconds doesnt change a thing.
I just ran into the same issue, what have you managed to do ?
white-energy said:
I just ran into the same issue, what have you managed to do ?
Click to expand...
Click to collapse
Sorry, kinda killed the thread since I forgot to check for any replies.
So far I haven't really been trying to fix the problem, but since I've just bought a new phone charger I thought I might as well give it a try to charge the Archos with it.
I'll check for any changes in a few hours, if nothing changed, I might aswell disassemble it, then I'll notify you what the problem is.
Related
Hey there,
I have my Vibrant for a good year now since it came out pretty much. Last week it just stopped charging out the blue. The battery is completely empty and shows a thermometer with a warning sign and stops charging seconds after its plugged in. So I assumed it might be a battery malfunction and I got my spare battery in as soon as I came home and tried charging - same problem. I think it is highly unlikely that both batteries fail at the same time. Therefore, I assume there is something wrong with the temp sensor in the phone. I saw a few people have a similar problem with the epic 4G, but the discussion got really side tracked by other issues. My phone is rooted, but I was running stock froyo, so that shouldn't be the problem or should it?
I just wanna know if anybody had the same problems and if there is a quick solution, I google and forum searched a while but as soon as you throw in the term battery it gets spammed with battery life discussions.I just checked my files I have on the phone, apparently I have the premium insurance - does that mean I just can go to the next Tmo store and get a replacement? Any feedback is greatly appreciated.
Phill
Well for your problem, i suggest you try a different rom and see if the problem persists... maybe its a bug
And as for insurance, you mail the phone in and pay a deductible, which should be like 135$ or so. They send you a refurb.. or if you say it wus lost, you dont have to mail in phone
Sent from a cell tower to the XDA server to you.
thanks for the quick reply. Is there a way to reflash without a battery?
I don't see it as a bad thing. If your phone gets too hot and keeps charging that's going to burn something inside. When my phone won't charge I know I have let it down. So it can cool down. But to fix your problem reboot the phone. You can keep charging it after it boots up
Sent from my SGH-T959 using Tapatalk
pro1st said:
thanks for the quick reply. Is there a way to reflash without a battery?
Click to expand...
Click to collapse
As long as your phone can run successfully for a couple minutes, i dont see why not
Sent from a cell tower to the XDA server to you.
Mine did something similar. I picked it up after putting it on the charger. It was hot and would not come on. I unplugged it and let it cool off for a while and it cleared up.
I got that message once...
Vibrant was in a car dock, with power.
It was *HOT* out and sun was hitting the back of the unit. (A/C on of course)
Google Navigation was running (display brightness max)
Google Listen was running
Bluetooth was passing music to a speakerphone
When I run the phone with that setup, the charger can't even keep up with the phone power needs. The battery level slowly drops. No question the phone is working hard.
This was a true heat issue... I removed the charger and turned off the display to let it cool off a bit. (I was almost home).
So the question again, is your phone hot or is it a false reading?
Robert
Hey,
I am sorry I didn't clarify the actual battery temp. It is normal - so its neither in the sun or in a too cold spot when I try charging it. The phone probably runs for one for a few seconds before turning off so there is no chance of the battery stats wipe. I think I will try to find an external charger and try to charge the batteries this way to have enough juice for flashing a new rom. Thanks for all the replies!
Does it charge the battery with the phone off? If not, I don't think a new ROM will help.
Hey there! Wondering if you got around to solving this. I've got a Vibrant doing the same exact thing. Battery being cool it sais that is overheating. Did changing the ROM solved it or not?
c0olcast said:
Hey there! Wondering if you got around to solving this. I've got a Vibrant doing the same exact thing. Battery being cool it sais that is overheating. Did changing the ROM solved it or not?
Click to expand...
Click to collapse
Sorry for resurrecting an old thread, but a resolution never seemed to be made here. Has anybody found a fix to this?
As of yesterday, my wife is having the same issue with my old Vibrant phone which she now uses. It's flashed with Bionix V 1.3.1 and Tigerblood overclock to 1.2ghz. This could be the issue, the Tiger Blood overclock, but I'm not sure. I'm out of the country for three weeks and currently she's left with a dud of a phone that keeps giving her the temperature warning in the triangle when plugged in while the phone is powered off followed by it stop charging. When she turns it on, she gets to the SD card check and then the phone completely freezes. Once in a while it's able to stay on for a minute or so before freezing, but more often than not the phone does not fully turn on and just goes frozen after a few seconds, sometimes at the Tigerblood logon screen before making it to the desktop. Me being 4000 miles away doesn't make it easier to help her but I've recommended she leave the phone unplugged, battery out for the night to see what happens. I also told her to take off her silicon case thinking maybe that has something to do with the overheating. Well after 7 hours of her letting it sit to cool off like that, with the case off, she plugged it back in and is having the same issues as yesterday. Absolutely no progress made. One of her colleagues said she should try leaving the phone in rice confused:) so she's giving that a go and another guy in a phone shop who she went to for advice after work said that the motherboard might need replacing. I'm convinced all it needs is to have the Tigerblood removed or reflash a rom onto it but there's really no knowing unless I have it in my hand.
Is there any quick fix to this problem without having to do all that? Surely there must be a way to charge the phone without it heating up and freezing up. She's tried plugging it into different rooms, on her laptop, etc, none seem to get rid of the temperature problem. I've had the phone since August 2010 and never had any issues with it. I also never once saw that temperature error message so was taken aback when she showed me it over skype. I just upgraded to the S3 and gave her the phone 2 weeks ago, but surely it shouldn't just die out just like that? Thought the Vibrants were made tougher than that?
Any help would be greatly appreciated. Much thanks in advance
Its most probably a kernel issue or a bug in the rom; so the only way to find out is to flash another kernel/rom..
P.s Vibrants are rock solid
Sent from my SGH-T959 using xda app-developers app
Update- Phone doesn't even turn on anymore, no signs of life
danny_extremex said:
Its most probably a kernel issue or a bug in the rom; so the only way to find out is to flash another kernel/rom..
P.s Vibrants are rock solid
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Will be looking into reflashing another kernel/rom when I get home in a few weeks time, but it must be noted that the phone has been showing no signs of life for the last few days now. After letting it sit out for 7 hours on the first night, battery out and everything, she went to plug it in the following morning and this time absolutely no notification came up. Not even a lighting up of the phone or anything. No signs of life at all. Every time she hit the power button nothing occurred. The phone still heats up and after a few minutes while plugged in and gets very hot to the touch again but no matter how many times she attempts to turn it on, nothing happens.. She's tried plugging it into her computer via usb, into electric sockets in other rooms, even in the bathroom in one of the 115 volt electric shaver outlets in the bathroom (we live in the UK currently), and none of these ideas worked. Still no signs of life. It has been this way for three days now and is frustrating as I can offer no advice to her to get the phone to turn on anymore.
What on earth can be the problem? Has this happened to anyone before? And is there a fix to this or can we consider the phone to be a paperweight at this point?
polosprt009 said:
Will be looking into reflashing another kernel/rom when I get home in a few weeks time, but it must be noted that the phone has been showing no signs of life for the last few days now. After letting it sit out for 7 hours on the first night, battery out and everything, she went to plug it in the following morning and this time absolutely no notification came up. Not even a lighting up of the phone or anything. No signs of life at all. Every time she hit the power button nothing occurred. The phone still heats up and after a few minutes while plugged in and gets very hot to the touch again but no matter how many times she attempts to turn it on, nothing happens.. She's tried plugging it into her computer via usb, into electric sockets in other rooms, even in the bathroom in one of the 115 volt electric shaver outlets in the bathroom (we live in the UK currently), and none of these ideas worked. Still no signs of life. It has been this way for three days now and is frustrating as I can offer no advice to her to get the phone to turn on anymore.
What on earth can be the problem? Has this happened to anyone before? And is there a fix to this or can we consider the phone to be a paperweight at this point?
Click to expand...
Click to collapse
Some kernels require a certain amount of power to fully boot the phone up and will not charge until it has 5% battery or so. I personally think her battery may be unable to hold a charge or like I said before it doesn't have enough juice to boot the phone because of the kernel. There is a way to charge the battery with the phone off. You can use ANY kind of usb cord, I used an old printer usb cable when I had to do this. All you do is cut off the side that is not usb and strip the positive and negative wires(red and black), then place the stripped wires on the positive and negative connectors on the back of the phone and insert the battery (make sure it's a snug fit). Plug the usb end into your pc and charge the battery that way, DO NOT let charge for over 2 minutes at a time. Wait five minutes and do it again if you have to. If she gets it to boot up, I would definitely flash a new kernel first to see if thats how the problem originated.
Sent from my SGH-T959 using xda premium
So I put my prime on my bed (it was on and working but closed in its dock) and proceeded to move my sheets to get in bed. The amount of static electricity it created was amazing (its been very cold and dry here) I didn't really think anything of it. I've shocked my prime touching it many times, however its completely dead. I have tried everything I could find in any post but it basically come down to this.
I let the unit charge fully and the green light comes on, but no matter what buttons I press and hold it never once vibrates (held power over 2 mins), nor does it show anything in device manager.
I was rooted and unlocked, I did the wheele nvflash thing more than a couple months ago. I have also hardware modified my device with external antenna for the WiFi when i got it less than a year ago.
i'm pretty sure i'm screwed but just looking for anything that might help.
mystkrh said:
So I put my prime on my bed (it was on and working but closed in its dock) and proceeded to move my sheets to get in bed. The amount of static electricity it created was amazing (its been very cold and dry here) I didn't really think anything of it. I've shocked my prime touching it many times, however its completely dead. I have tried everything I could find in any post but it basically come down to this.
I let the unit charge fully and the green light comes on, but no matter what buttons I press and hold it never once vibrates (held power over 2 mins), nor does it show anything in device manager.
I was rooted and unlocked, I did the wheele nvflash thing more than a couple months ago. I have also hardware modified my device with external antenna for the WiFi when i got it less than a year ago.
i'm pretty sure i'm screwed but just looking for anything that might help.
Click to expand...
Click to collapse
This may or may not help but I had it once where my prime would not turn back on.
I took it out of the dock and plugged the power cable directly into the tablet and then held the power button and it powered up with full charge in it.
Yours does sound like a short issue but it's worth a go.
flumpster said:
This may or may not help but I had it once where my prime would not turn back on.
I took it out of the dock and plugged the power cable directly into the tablet and then held the power button and it powered up with full charge in it.
Yours does sound like a short issue but it's worth a go.
Click to expand...
Click to collapse
Nope but thanx for the help
Has anyone ever seen one that wouldn't vibrate before?
Hey guys, it's been awhile since I asked a question, but here I am, lol.
In a nutshell, I'm pretty sure something in my device (hardware) is fried, but I thought I'd see if anyone knows better.
The problem is my device seems to be sending power out of the usb port, and doesn't connect to the pc or recognize it is charging correctly.
This also applies to download mode (windows says device has malfunctioned) and when powered off (there is no battery that shows up when plugged in). In order to power back on after turning it off, I have to remove the battery, then reinsert it while holding down the power. I can't think of much that could have caused this, other than I was visiting places with high humidity levels. One unusual thing that happened before this started was my device rebooted into safe mode when playing bad piggies. That was really weird since I have tried booting into safe mode before, but thought samsung must have disabled it for some reason. I have already tried wiping data and flashing a new kernel/rom. Obviously I can't re-partition since I can't connect to my computer in download mode. What do you guys think? I think it is time for a new device.
EDIT: I should mention that it started behaving normally yesterday for about 5 minutes, but then it went back to this.
iJimaniac said:
...
In a nutshell, I'm pretty sure something in my device (hardware) is fried, but I thought I'd see if anyone knows better.
The problem is my device seems to be sending power out of the usb port...
Click to expand...
Click to collapse
I'm 99.9% sure that under normal conditions that an Android device should never power the USB port. Source of speculation. If it is indeed powering the USB, then you've either got a really wonky firmware installed, or some sort of hardware issue. I'd try to make sure that it's sending power out before going further (especially if you can't charge it, the battery will be dead soon). After this test, I'd keep the battery out for a while, just to be sure it's not going to short anything.
One thing I've noticed in my tinkering is that taking a device apart, then putting it back together again can mysteriously fix problems (although 75% of the time the fix is temporary). If you suspect water damage, opening it up and letting it air out might help. I want to say there are certain cleaners that are great for cleaning up any water spots that might be shorting things out, but I've never had to try myself.
That's all I can think of right off. Good luck.
Dr. Cyanide said:
I'm 99.9% sure that under normal conditions that an Android device should never power the USB port. Source of speculation. If it is indeed powering the USB, then you've either got a really wonky firmware installed, or some sort of hardware issue. I'd try to make sure that it's sending power out before going further (especially if you can't charge it, the battery will be dead soon). After this test, I'd keep the battery out for a while, just to be sure it's not going to short anything.
One thing I've noticed in my tinkering is that taking a device apart, then putting it back together again can mysteriously fix problems (although 75% of the time the fix is temporary). If you suspect water damage, opening it up and letting it air out might help. I want to say there are certain cleaners that are great for cleaning up any water spots that might be shorting things out, but I've never had to try myself.
That's all I can think of right off. Good luck.
Click to expand...
Click to collapse
Yeah, I'm working on taking it apart right now. With my limited experience on electronics, I would be willing to bet it's a capacitor that's gone bad somewhere. That wouldn't be a problem on a desktop since I could just solder a new one in, but I don't think I have the skill to do something in such a small scale, not to mention I don't think you can even buy them that small.
The same thing happened to me, and I had to send it in for repair. Luckily, I was still in warranty. Also, are you sure it's not the charger cord?
TheKryptonite said:
The same thing happened to me, and I had to send it in for repair. Luckily, I was still in warranty. Also, are you sure it's not the charger cord?
Click to expand...
Click to collapse
I've tried multiple cables, and I'm unfortunately out of warranty.
Upon disassembling and cleaning with rubbing alcohol, it seemed to be working properly, with the exception of computer connection. However, I plugged it into a DC car charger (leaving the charger itself unplugged from an outlet), and the light came on again (which is what I was talking about when I said it was sending power out), and now it is acting weird again. I guess I'll take it apart and clean it again...
iJimaniac said:
I've tried multiple cables, and I'm unfortunately out of warranty.
Upon disassembling and cleaning with rubbing alcohol, it seemed to be working properly, with the exception of computer connection. However, I plugged it into a DC car charger (leaving the charger itself unplugged from an outlet), and the light came on again (which is what I was talking about when I said it was sending power out), and now it is acting weird again. I guess I'll take it apart and clean it again...
Click to expand...
Click to collapse
honestly, i cannot begin to fathom what could be causing this. it seems to me samsing paid more attention to the charging port then say amazon did on the first gen kindle.
i do however, wish you the best of luck and hope you somehow manage to fix it
iJimaniac said:
I've tried multiple cables, and I'm unfortunately out of warranty.
Upon disassembling and cleaning with rubbing alcohol, it seemed to be working properly, with the exception of computer connection. However, I plugged it into a DC car charger (leaving the charger itself unplugged from an outlet), and the light came on again (which is what I was talking about when I said it was sending power out), and now it is acting weird again. I guess I'll take it apart and clean it again...
Click to expand...
Click to collapse
See! Told you taking it apart and putting it back together again works... temporarily. :silly:
You're right, that does sound like power going out. Which would be super cool for powering, say, a micro USB laser pointer, but it's not so great when it should be charging. Can you double check with another device that the charger doesn't light up normally? I know my wife's laptop charger has a LED that stays on for a long time after it's been unplugged from the wall, sipping off of power left in the charger. It could be something similar with your charger.
Just a though... if power is only suppose to go into the device, then wouldn't it be reasonable to assume to that there would be a diode forcing power to only go one way? Or does it need to cycle power back to the charger? IDK, but it might be worth looking to see if something looks missing.
I read somewhere that if the battery voltage gets too low i.e. battery is totally flat, a current will flow from the device to the charger so this may be what's going on here. I didn't really understand the post as I was just whizzing through the thread, but i think the solution was to charge the device for many hours until the battery voltage was high enough for normal charging to occur. I'll try and locate the post, but it might take a while
Sent from my Nexus 7 using XDA Premium HD app
@iJimaniac if all of these suggestions dont work, there is the possibility to just buy another battery and a battery charger and keep switching out the batteries when they die
Maybe @henk5066 would know something about this?
From what it sounds like, your power circuit is fried and is not directing power correctly this means that you're probably going to have to replace the mainboard. however don't worry. you can get one from a player with a broken screen on ebay for about 10 $. I can p.m. you some links to products on eBay with main board working and not screen and I can post a video on YouTube that shows you how to replace the board. it's actually rather quite easy. I don't get why most people don't do that and instead buy a new one. let me know if that helps
Sent from my YP-G1 using xda app-developers app
henk5066 said:
From what it sounds like, your power circuit is fried and is not directing power correctly this means that you're probably going to have to replace the mainboard. however don't worry. you can get one from a player with a broken screen on ebay for about 10 $. I can p.m. you some links to products on eBay with main board working and not screen and I can post a video on YouTube that shows you how to replace the board. it's actually rather quite easy. I don't get why most people don't do that and instead buy a new one. let me know if that helps
Sent from my YP-G1 using xda app-developers app
Click to expand...
Click to collapse
Wow, I didn't realize a broken player is so cheap. I'll look into it, and instructions won't be needed; I've already fully dissasembled my device many times in the past, just for kicks.
Edit: could you send me those links? I'm having a hard time finding very many under $25, which is still a good price I suppose.
the broken player it's self is cheap (0.99$ if your lowest bidder and win) it is shipping that makes up for most of the cost. Just make sure you get one that says powers on, that is the main indicator that the main board is still good.
EDIT: I just looked on ebay, aparantly the person i bought my new board is out of the 4.0 player. and it looks like there is however one with a 9.99$ bid. you could raise it and get the player but that is the cheapest you will get. i will pm you a link to it.
I had the same problem
I had the same problem, what i did was, instead of charging it with the original charger, i charged it with my nexus 10 charger in download mode all through the night, and the next day it would have about 80 percent charge and it was in the system, but it drained quick when i would unplugged it, so i repeat the same procedure over several days until get to 100% and scince then i have had no problems with my SGP, hopefully i helped you
Hell.Knight said:
I had the same problem, what i did was, instead of charging it with the original charger, i charged it with my nexus 10 charger in download mode all through the night, and the next day it would have about 80 percent charge and it was in the system, but it drained quick when i would unplugged it, so i repeat the same procedure over several days until get to 100% and scince then i have had no problems with my SGP, hopefully i helped you
Click to expand...
Click to collapse
Interesting, i thought the devices could not charge in download mode.
On the subject of odd charging behavieor, has anyone noticed that when plugged in running cyanogenmod overclocked to 1200mhz, the micro usb port area on the player gets rather hot?
henk5066 said:
Interesting, i thought the devices could not charge in download mode.
On the subject of odd charging behavieor, has anyone noticed that when plugged in running cyanogenmod overclocked to 1200mhz, the micro usb port area on the player gets rather hot?
Click to expand...
Click to collapse
I haven't noticed excessive heat in that area.
Sent from my YP-G1 using Tapatalk 4 Beta
lg e970 battery does not charge. when plugged into charger, few things happen
1. power button light blinks and then screen comes on(blank) and light stops blinking.
2. when power button is pressed once, black and white battery charging indicator shows for a few seconds and then screen goes blank, power button light starts blinking again. this loops.
3. when power button is pressed for a longer time, lg logo shows for a second and then screen goes blank again.
4. all this while the phone heats up rapidly, especially the screen and battery connector.
please help:crying:
ajaybala said:
lg e970 battery does not charge. when plugged into charger, few things happen
1. power button light blinks and then screen comes on(blank) and light stops blinking.
2. when power button is pressed once, black and white battery charging indicator shows for a few seconds and then screen goes blank, power button light starts blinking again. this loops.
3. when power button is pressed for a longer time, lg logo shows for a second and then screen goes blank again.
4. all this while the phone heats up rapidly, especially the screen and battery connector.
please help:crying:
Click to expand...
Click to collapse
This exact thing happened to me about a month ago. Whats happening is your battery is basically dead/at 0% or 1%. When you try and charge it the phone gets hot so it's not gonna charge.
What i did was literally put the phone on ice. You gotta get a bowl big enough to put a bunch of ice in, then put some kind of layer over that. Like a bag or foil. Something to keep your phone from getting wet. Now sit your phone on top of the ice and plug it into the charger. The phone is gonna slow charge and it'll take a couple hours to charge 4 or 5%. Wait 3 hours while keeping it on ice/charging it. Then take it off the charger and it should turn on. Now put it back on the charger and it'll charge normally. Idk how much of this made sense to you, but this worked for me after trying many other things.
Thank you so much. you have helped revive a dead phone. I followed your instructions to the letter and after three and a half hours found the phone to have charged to 60%.
The ice really worked. The heat wasn't allowing it to charge.
Sent from my E7 using XDA Premium 4 mobile app
ajaybala said:
Thank you so much. you have helped revive a dead phone. I followed your instructions to the letter and after three and a half hours found the phone to have charged to 60%.
The ice really worked. The heat wasn't allowing it to charge.
Sent from my E7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm glad yours worked out but my case is a little different. One night I was playing games for hours and hours and while I had the charger connected so it wont die on me and when I started to notice that it's getting pretty hot, I put it down and its still charging and let it charge overnight. When I woke up the phone won't turn on anymore. When I hold the power for a long time it would start blinking but the screen won't turn on or anything and when I let go of the power button it will stop blinking, power + volume up or down combinations has not effect or whatsoever.
So I decided to connect it to my laptop thinking that maybe it got brick and I'll restore with LGNPST but it won't even recognize the phone, no matter what button combinations I make. So I was thinking maybe the battery was bad so I bought a new battery, removed the screws &cover but when I installed the new battery the damn thing still won't turn on. So now I'm thinking maybe it's the charging port, I have replaced the charging/mic module as well and went through all the trouble of disassembling the phone BUT IT STILL WON'T TURN ON!
I don't know if this method will work but it won't hurt I guess but considering I have replaced the battery already and the phone had already cooled-down since it's been days that I can't turn it on. ANYONE OUT THERE CAN SHED SOME LIGHT PLEASE!
farewell LOG
well for trying almost everything even to the point of replacing parts I guess it's time for me to say goodbye to my beloved LG Optimus G. It's sad coz this phone is pretty powerful and good looking too, I dont even think I've unlocked the full potential of this phone but it served pretty damn well and unfortunately I think it's out of warranty already since I've had it for almost 2 years now.
So Sayunara LGOG!
yhe2x said:
well for trying almost everything even to the point of replacing parts I guess it's time for me to say goodbye to my beloved LG Optimus G. It's sad coz this phone is pretty powerful and good looking too, I dont even think I've unlocked the full potential of this phone but it served pretty damn well and unfortunately I think it's out of warranty already since I've had it for almost 2 years now.
So Sayunara LGOG!
Click to expand...
Click to collapse
I could probably help with your problem too if it's not too late. This same thing happened to my mom's phone(She has the LG Optimus G as well) My first guess was to replace her motherboard. I ordered her another optimus g from EBay that had a cracked screen and cracked back for $40(make sure it's an unlocked phone). The internal hardware was all in working order. I simply replaced the motherboard in hers with the one from Ebay, and it worked. If you haven't gotten rid of the phone yet you could try this. I found a teardown guide on youtube that made it really easy to remember where to disconnect and reconnect everything to the motherboard. The only downside to this is it's basically a new phone and anything not stored on your sd card will be gone. It's like a factory reset.
hey mate, wow I didnt think anyone would reply to my post anymore.. thanks for replying, anyway no I havent gotten rid of it yet though I already got a Galaxy S5 if I can fix it soon I can still return the S5 coz right now I'm not happy with it coz of the locked bootloader.
I was actually thinking of doing that since I've already gone through all troubles of replacing the mic/charging port module so why not just continue experimenting on it. I will follow your advice but do you know anywhere or anyone else I can find just like the one you got?
Your advice is greatly appreciated, thanks
Hi there, XDA folks!
Mario here with some phone problems..
I have a CDMA Evo 3D running on the stock ROM.
The phone's charging cable was shorting out ever since I bought it (got it 2nd hand). I had to wiggle it in order to get the phone charging.
I gave it to my girlfriend to use it for taking pictures n whatnot while outside of town. She returned it kinda Rambo-ish; the front of the phone basically fell apart.. the front metal grill surrounding it, at least.
Phone worked fine, except for the cable shorting out even more. My laptop shut down every time that happened, so I'm quite sure that's not what caused the problem I'll be explaining later on in this thread.
So let's get to the point, shall we?
My phone was really low on battery, something within the range of 2-5%. I tried charging it, but the wires shorted out again and the laptop died on me.. again, and again, and again..
I couldn't really bother with fiddling around with it until it starts, so I just unplugged it and left it that way.
The phone sat for a few days, my (main) laptop broke, so I decided to give the good ol' Facebook Messenger a go.. sadly, the phone would not turn on or start charging.
I removed the shrink-like wrap around the wires of the USB cable, cut the bad parts and twisted the color-matching wires in order. Sadly, the phone would still not charge.
I tried with another (self-made) USB cable... no luck whatsoever. Just to clarify; the blue wire on the one the phone comes with is ground, right? If not that could of caused the problem, since I connected the blue wire on the mini-usb to the black one on a standard USB plug.
I tried juicing the phone up a tad bit by running 5V on the battery for 15 minutes or so.. didn't really bother going for more, since it's kinda hard to keep 2 wires pressed against the battery for more than that. The phone powered up, but the display did not. There was the low battery sound, volume keys were functional, vibrating feedback was okay.. hell, the phone even took a screenshot when I pressed power button + volume down!
Sadly, that didn't solve anything.. even turned on, it would not charge. The 15-minute charge is good for a minute of red blinking light and fancy glowing buttons, nothing more.
Is the phone dead, or should I give it a hour charge directly and see how that goes?
Thanks in advance to everyone who replies!
i think it'll be good if you buy a universal battery charger for phone. so you can charge your battery without plugged to the phone
apinghed said:
i think it'll be good if you buy a universal battery charger for phone. so you can charge your battery without plugged to the phone
Click to expand...
Click to collapse
I am looking for more opinions before I spend cash I don't have on chargers that may not work.
If you or someone else is positive about the display not working because of not enough battery juice, then I'll manually charge the battery for an hour, even though it's uncomfortable as hell to hold 2 wires on the pins for that long.
What's bugging me is that it's not charging once it has just enough juice to power up everything, no display either. I'd like to know if it's doing that, because the battery is too dead to actually start charging up via the phone and whether the display just doesn't work or there's not enough juice for it.
Edit; I bought a chinese charger that charges the battery directly (2pins). The display still does not work and the phone will still not charge via the cable. Could it be a bad cable (and a dead display..)? It seems like the phone itself is responsive - I unlock it, press the "search" button and when I type on the keyboard (that I don't see), it vibrates with every pressed key.
Also, I can hear it taking a screenshot and the volume down/up buttons seem to be working fine.
Dontrememberusername said:
Edit; I bought a chinese charger that charges the battery directly (2pins). The display still does not work and the phone will still not charge via the cable. Could it be a bad cable (and a dead display..)? It seems like the phone itself is responsive - I unlock it, press the "search" button and when I type on the keyboard (that I don't see), it vibrates with every pressed key.
Also, I can hear it taking a screenshot and the volume down/up buttons seem to be working fine.
Click to expand...
Click to collapse
this is exactly what's been going on with my phone as of a few days ago.
checked the time while it was plugged in, unplugged it...screen froze.
hasn't turned back on since.
the buttons on bottom light up, though.
i can take calls, use my unlock pattern (it takes me a few tries now that i can't see anything) and press the search key for google now.
for all intents and purposes...phone's fully functional...except i can't see anything going on.
i brought my phone into a sprint corp store, they changed the top housing for me screen and all for free.
it was really nice.
but, that didn't change anything.
screen still doesn't change anything.
they said the board probably shorted on screen lead.
have you figured anything out?
cipher77 said:
this is exactly what's been going on with my phone as of a few days ago.
checked the time while it was plugged in, unplugged it...screen froze.
hasn't turned back on since.
the buttons on bottom light up, though.
i can take calls, use my unlock pattern (it takes me a few tries now that i can't see anything) and press the search key for google now.
for all intents and purposes...phone's fully functional...except i can't see anything going on.
i brought my phone into a sprint corp store, they changed the top housing for me screen and all for free.
it was really nice.
but, that didn't change anything.
screen still doesn't change anything.
they said the board probably shorted on screen lead.
have you figured anything out?
Click to expand...
Click to collapse
Nope, I'm still in the same situation.
Does yours charge?
My phone isn't recognized by my laptop at all, so I'm guessing something is indeed fried. I don't have the appropriate screwdrivers to open it up and inspect the board, otherwise I'd open it up and check it out.
If you have Torx T5 & T3 screwdrivers you should give it a go - post some decent-res pics over here and I'll at least visually inspect it.
I genuinely don't feel like spending more money for tools n whatnot for a phone that may be permanently dead.. planning on getting a second-hand S4 anyways. Waiting on a student loan and smashing this phone to pieces as soon as I get the cash for a new one. Can try and help out for yours if you manage to open it, though. Could be something as simple as a dead resistor that shouldn't be too hard to replace.
I tried the hillbilly method and hit my phone a few times against a wooden bench, that didn't seem to fix it. Pretty positive something's fried, but I'm also guessing it isn't a viable component, having in mind the phone functions normally, even though the display & usb port don't work.. hell, my phone woke me up at 3AM today, 'cause the alarm went off, lol!