I have a galaxi nexus, I proceeded by setting the phone to the installation of 11 cm. It appears the face of cyano with the wheel turning, grinding a bit 'then turns off. I attached the battery charger. What should I do? Sorry for my english
Rooted
I have a Samsung Galaxy Exhibit SGH-T599N rooted with Cydiaimpactor and I dont think a recovery mod installed. In recovery at the top it says android stock recovery and I want to install clockwork mod or teamwin modrecovery. I tried clockwork with Odin but it keeps failing. Could someone help me with this cause I have some apps I want to really try but this is holding me back from using ROM toolbox. If I have one of these already installed then how can I tell?
erycauti said:
I have a galaxi nexus, I proceeded by setting the phone to the installation of 11 cm. It appears the face of cyano with the wheel turning, grinding a bit 'then turns off. I attached the battery charger. What should I do? Sorry for my english
Click to expand...
Click to collapse
Do factory reset and wipe cache and dalvik cache.
If not working, downlaod stock firmware and flash it with Odin.
Did you happen to try flashing clockwork with rom manager from the play store?
https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager
♢NoteIII♢
No. Dont know how. I'll try now............. Upon looking I can't see my phone on the list of compatible ROMs for CWM. I hear that cwm works on my phone but dont know how to I stall. Don't wanna brick again. Tried with original. And got stuck on startup screen.
Sent from my SGH-T599N using xda app-developers app
It's not the ROM that needs to be compatible, it's the device. Below is a link of the entire list of devices that are compatible with the clockwork recovery
http://www.clockworkmod.com/rommanager
And this is the link of the entire list of compatible devices twrp.
http://teamw.in/twrp_view_all_devices
If your device is not on either of these lists , that means it is not officially supported. Does not mean it is not available. A developer may have compiled a copy specifically for your device. In which case, if you look at the "Original Android development" forums for your device it would be there. If you cannot find it there, it probably does not exist.
♢NoteIII♢
OK bro, took me some time but found and flashed CWM to my Samsung galaxy exhibit t599n. Now my dilemma is that when I try to flash recovery I loop back to CWM recovery screen. Tried to install Cerberus from Rom Manager and used the in app flash tool. It installed and when I clicked reboot. It just kept going to the recovery screen. Thanks too for the advice earlier. That really helped. Now, please help me to avoid this looping. I think I may be doing something wrong or leaving out something.
Sent from my SGH-T599N using xda app-developers app
Related
Anyone know if, or when there will be support for these players for clockworkmod recovery? when I run it, I have a choice of fifteen different Samsung smartphone/tabs come up when prompted to "confirm phone model" However, none show an option for these players.
there will be soon im sure..this is still a newer device so it will be a bit. CWM-Rom Manager from the market does not support the player/s at this time. more then likely a dev will create a custom recovery instead. i wouldn't mess with CWM from the market unless it is annouced that Koush supports it.
Sent from my Slider SL101 using xda premium
There's nothing as of yet. I wouldn't be surprised to see something eventually. I had tried things myself to try to get it on the device, but it got stuck in a boot loop :/ .
I flashed cwm for the i9000 with no luck. It said it completed successfully, but went to the stock recovery. Bummer.
If I knew how to do a custom recovery I'd work on it for sure. I just don't want to brick it....
InGeNeTiCs said:
I flashed cwm for the i9000 with no luck. It said it completed successfully, but went to the stock recovery. Bummer.
If I knew how to do a custom recovery I'd work on it for sure. I just don't want to brick it....
Click to expand...
Click to collapse
That's interesting! The i9000 is in the list of available choices.
i would love to see cwm on the player 5.0. this is the only thing holding me back from making themes and roms for this device. i know how to package roms, but when it comes to anything deeper then that i get lost.
but i would love to learn and help to port cwm to the players
I have read pages and pages of solutions but none worked for me, there was always a problem so I decided to post it here.
My Transformer Prime is bricked. I was on build 9.x.x.28, unlocked and rooted. Had recovery on and installed cyanogenmod 9 rc1. But then the cgm9 got stuck on the boot screen for like 6h so I decided to wipe the device because I thought (stupid) that I would be able to just boot ICS after. Now I am stuck in the eee pad screen or I can go to the screen with the usb logo and wipe data... I just did something that removed ClockWork Recovery and the android logo on the screen with the usb and wipe data...
When I still had CWR, I played around with it and I think I deleted everything in the internal memory... just fyi... if any other info is needed feel free to ask.
Any help appreciated!
pderkay said:
I have read pages and pages of solutions but none worked for me, there was always a problem so I decided to post it here.
My Transformer Prime is bricked. I was on build 9.x.x.28, unlocked and rooted. Had recovery on and installed cyanogenmod 9 rc1. But then the cgm9 got stuck on the boot screen for like 6h so I decided to wipe the device because I thought (stupid) that I would be able to just boot ICS after. Now I am stuck in the eee pad screen or I can go to the screen with the usb logo and wipe data... I just did something that removed ClockWork Recovery and the android logo on the screen with the usb and wipe data...
When I still had CWR, I played around with it and I think I deleted everything in the internal memory... just fyi... if any other info is needed feel free to ask.
Any help appreciated!
Click to expand...
Click to collapse
If ure able to get into the download mode u could reflash astock rom or a recovery image to restore ure phone
if this doenst work try ro push a firmware via adb
this may also be interesting for ure purpose:
http://forum.xda-developers.com/showthread.php?t=1706918
Thank you, i'll try later and let you know. But can I install a rom from support.asus.com? Or does it have to be modified in any way?
Sent from my GT-P1000 using xda app-developers app
Didnt work. Pushed recovery and rom with fastboot but when i restart, there is no way to get to recovery. Instead it goes straight to the screen with the wipe data and usb icon. No android icon.
Sent from my GT-P1000 using xda app-developers app
pderkay said:
Didnt work. Pushed recovery and rom with fastboot but when i restart, there is no way to get to recovery. Instead it goes straight to the screen with the wipe data and usb icon. No android icon.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
whats about trying to flash a bootimage via odin?
Thanks, I will try it tonight. My main problem is that I don't have the android icon when I get to the screen with fast boot and wipe data. I wasn't able to find anyone thread with that problem so I don't know what that means. When I push clockwork recovery with fastboot it says ok in fastboot on my computer and the blue bar on my prime is full but then when I reboot the tablet, and I try to get to recovery it wouldn't give me the option and instead goes straight to the fastboot menu.
Could you give me any instructions how to do it with odin and what files I need?
Thank you
BestBuy rocks
Thanks guys but I just went to BestBuy and they told me I can pickup a replacement at another store tomorrow morning. The only question they asked me was what is wrong with it and I said it wouldn't boot. I don't know if that's normal practice or I'm just lucky that the guy didn't care or know that I voided my warranty...
Noob here, please bear with me:
Updated my I577 to ICS, then rooted it using this thread: http://forum.xda-developers.com/showthread.php?t=1806118
Worked like a charm, then I picked up ROM Toolbox Lite from PlayStore, which worked fine until I tried to change themes.
Somehow, it got to where boot was stuck at vendor logo. Unfortunately I did not Nandroid backup in time, but I was able to do a Kies backup before rooting, so not worry about the data loss at this time.
Used CWM5, did davlik & cache wipes, factory resets several times, no dice. No stock ROM available so I tried this:
http://forum.xda-developers.com/showpost.php?p=30444507&postcount=6
(flashed system tar through ODIN) Hanged at "system.img.ext4".
Here's where I'm at now:
-- Boot looping at second Samsung logo
-- ODIN 1.85 still reads device at port
-- Battery indicator visible when plugged in & power off.
-- Still able to get to cwm recovery 5.5.0.4
So, IS IT SOFT BRICKED OR HARD BRICKED?
Bonus Question: Is it unbrickable?
Any input or answers are GREATLY appreciated, and a fix will most likely be monetarily compensated through Paypal.
Black-wolf, j3r3goss, or shabbypenguin if you see this, your input is certainly appreciated as well!
Its soft bricked. Hard brick means there is no life at all and won't even power on (through software).
Any soft brick is unbrickable, the only nonunbrickable brick is a hard brick (which is rare)
Sent from my MB508 using xda premium
If you can get into Clockwork Mod Recovery still then select wipe data (Do this twice), then select whipe cache (Do this twice), next select factory reset (Do this twice), finally go back and select reboot system. This should unbrick your phone for you
Sent from my SCH-I535 using xda premium
shimp208 said:
If you can get into Clockwork Mod Recovery still then select wipe data (Do this twice), then select whipe cache (Do this twice), next select factory reset (Do this twice), finally go back and select reboot system. This should unbrick your phone for you
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
This.
If you can get into recovery you're only in shallow water
Sent from my MB508 using xda premium
Something's changed
THANKS so far for the input!
I was able to nandroid out of the loop, but now it's back to my original problem--it keeps booting to the "Rethink Possible" AT&T screen & freezing.
Any ideas? I'm thinking I'm gonna be outta luck until I get my hands on a legit Gingerbread Stock tar.
Did you whipe cache, whipe data and preform a factory reset like we suggested? Preforming a nandroid restore won't get you out of your phone hanging on the at&t logo.
Sent from my SCH-I535 using xda premium
Samsung Galaxy Ace GT-S5830i brick
hey there im a noob to all this but i registered to see if someone here could give me advice.
i tried to flash a new rom on my phone (see title) and it doesnt do a thing anymore...
i rooted it and tried to put Retribution beta_2 on it and itlooked to be working till it rebooted..
all i got was the startup screen with galaxy ace gt-s5830i.
i looked around and i found that i could use download mode and odin 1 click download to put in a new rom.
so i tried that and it looked to be working but it stalled at end of install and now it doesnt even turn on anymore...
HELP!!!
hope someone knows whats up and can give me some advice.
i hope i didnr hardbrick it like i saw in this thread...
Emil.warm said:
hey there im a noob to all this but i registered to see if someone here could give me advice.
i tried to flash a new rom on my phone (see title) and it doesnt do a thing anymore...
i rooted it and tried to put Retribution beta_2 on it and itlooked to be working till it rebooted..
all i got was the startup screen with galaxy ace gt-s5830i.
i looked around and i found that i could use download mode and odin 1 click download to put in a new rom.
so i tried that and it looked to be working but it stalled at end of install and now it doesnt even turn on anymore...
HELP!!!
hope someone knows whats up and can give me some advice.
i hope i didnr hardbrick it like i saw in this thread...
Click to expand...
Click to collapse
Are you able to get into recovery mode? Did you flash a custom recovery such as TWRP or Clockwork Mod Recovery?
Samsung Galaxy Ace GT-S5830i brick -
shimp208 said:
Are you able to get into recovery mode? Did you flash a custom recovery such as TWRP or Clockwork Mod Recovery?
Click to expand...
Click to collapse
Hi thanks for your response to my problem,
yes i flashed a custom recovery from clockwork and i rooted it. i cant get in to recovery mode.
after i did that i tried flashing custom rom like i said before but after reboot it didnt do anything.
i just got the startscreen and found that i could use download mode and odin to flash original rom.
i used 1 click downloader from Odin and it started to recover my rom,but at the end it stalled.
after that happened i couldnt do anything anymore.
i thought it was totally dead but i just saw that when i connect to my comp it says unknown device..
im an idiot for trying this stuff without the knowledge..it looked easy in descriptions
but i found different descriptions how to do it..
i cant put links in my posts yet cause i am new..
i used the 1st one.. but after that didnt work i found that other 1 and that is little different...
.android.gs/update-galaxy-ace-s5830i-retribution-gingerbread-2-3-6
.technostall.com/samsung-galaxy-ace-s5830i-installing-retribution-custom-rom-firmware
i hope i have given you enough info
greets Emil
Hmm today i found out smth new,i installed some samsung drivers and now my phone is recognized as a samsung android phone-android composite adb interface its says in device mananger on my laptop.
All Fixed!
shimp208 said:
Did you whipe cache, whipe data and preform a factory reset like we suggested? Preforming a nandroid restore won't get you out of your phone hanging on the at&t logo.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I did all that, but the one thing that finally nailed it was formatting my internal SD. I also formatted my external one, but I don't even think I put it back in the phone.
So, if anybody's reading this in the future, and you're still stuck after wiping the cache, wiping Davlik & performing factory reset,
FORMAT THE SD!
And flash this through Odin: http://forum.xda-developers.com/showpost.php?p=31765274&postcount=59
Huge thanks to j3r3goss!! :good::good::good:
Main Exhilarate thread here:
http://forum.xda-developers.com/showthread.php?t=1926253
Soft bricked my galaxy s4
gagdude said:
Its soft bricked. Hard brick means there is no life at all and won't even power on (through software).
Any soft brick is unbrickable, the only nonunbrickable brick is a hard brick (which is rare)
Sent from my MB508 using xda premium
Click to expand...
Click to collapse
Hey, total noob here but Im having problems with my Galaxy S4 so I was on this thread looking for a fix.I have an AT&T Galaxy s4 (SGH-I337) and I just rooted my phone and installed clockworkmod recovery. I went to backup and then when I rebooted it freezes at the AT&T logo. Ive wiped data/factory reset, wiped caches, etc ive done everything and it freezes at the same spot. I have no ROMS as I had just rooted, just stock 4.2.2. Then I saw a vid on how to unroot/unbrick and it was working perfectly until it went to reboot.(I downloaded 4.2.2 firmware for my model phone) I used ODIN and it said pass then when it was rebooting it froze in the exact same spot (also instead of the normal bootup it still had the "custom" and an unlocked lock that Ive had since I rooted) and now I cant enter recovery mode. It starts booting but then freezes when the blue letters come on! Now even when I try to turn it on normally it freezes at the samsung logo (with unlocked lock and "custom")Please help! I would greatly appreciate it!
Ok, so I was about to install custom ROM to a unrooted SGS2 phone, I didn't have a computer so I decided to root my phone installing cwm.zip through stock recovery and then installing su and busybox via cwm. then I backed everything up, downloaded a custom ROM with a custom kernel and cwm touch recovery with it. I went to stock recovery again and installed cwm.zip to get to cwm recovery and first made a nandroid backup and then installed the custom ROM. It turned off while it was on aroma installer and now it doesn't go on. Is it bricked? is there anything I can do?
Sent from my GT-I9300 using xda app-developers app
is it because I was trying to install a custom ROM through temporary Cwm? any help is appreciated. My girlfriends phone )
Sent from my GT-I9300 using xda app-developers app
If you can get to download mode or recovery then try flashing the from again
Preferably use Odin by getting to download mode
Sent from my GT-I9100 using xda app-developers app
jokerrrrrrr said:
If you can get to download mode or recovery then try flashing the from again
Preferably use Odin by getting to download mode
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I can't get anywhere.. and I assume I can't do anything even if I get it plugged on a computer? if it doesn't go to Odin or stock recovery or no where at all what are my chances? bricked I guess. BTW will anyone at Samsung know that I tried flashing my phone if I take it to be fixed? I mean if it doesn't go on, don't they have to replace everything and they would never even know that i tried to flash it?
Sent from my GT-I9300 using xda app-developers app
You soft-bricked it maybe...
Did you try booting up your phone pressing the POWER + HOME + VOL UP keys? If it boots into recovery, then just do a nandroid restore...
If you're just concerned with bringing the phone back to life... Boot up your phone pressing POWER + HOME + VOL DOWN keys. It will show you a green n' black menu, then press VOL UP. It will then show an Android robot with "downloading" written below. Now just connect it to your PC (I hope you already installed drivers for S2) and start ODIN. (Make sure KIES is off)
Use a .tar.md5 or .tar(or any other format) file(or files depending on your firmware) and put it in the respective box. Leave the tickboxes as they are and DO NOT use a .pit file AND DON'T TICK repartition.
Click start flash and your phone should boot up on the stock ROM again!
Just trying to help you!
Do you camera is hot ? If yes "I THINK IT"S MAYBE HARDBRICK ?"
Can you buy the Usb jig or do it ?
Paulius7 said:
Do you camera is hot ? If yes "I THINK IT"S MAYBE HARDBRICK ?"
Can you buy the Usb jig or do it ?
Click to expand...
Click to collapse
I'm guessing also its hardbrick, don't know what is USB jig? if it is hardbrick, is there anything at all I can do? it doesn't go to Odin or recovery or nowhere, i can't get the screen on at all.
Sent from my GT-I9300 using xda app-developers app
With USB jig Your phone go to Download mode without VOLUME+POWER AND MENU BUTTONS
P.S. Hardbrick is Motherboard damage.(Or maybe you install rom it's not for you galaxy ?)
P.S.S. I haved a CPU damaged so it's not working(I can't boot up it like you) i go to gurante i they fix that.
P.S.S.S. http://forum.xda-developers.com/showthread.php?t=1891197
Paulius7 said:
With USB jig Your phone go to Download mode without VOLUME+POWER AND MENU BUTTONS
P.S. Hardbrick is Motherboard damage.(Or maybe you install rom it's not for you galaxy ?)
P.S.S. I haved a CPU damaged so it's not working(I can't boot up it like you) i go to gurante i they fix that.
P.S.S.S. http://forum.xda-developers.com/showthread.php?t=1891197
Click to expand...
Click to collapse
where can I get a USB jig? I don't know if my motherboard is broken, it doesn't turn on at all, screen stays off what ever I press. and even if a put the charger in. in the evening I will have a computer and I can connect it to my PC but I assume that there is nothing I can do anyways because I can't just turn the phone on. I was trying to install a custom ROM with a temporary CWM recovery. didn't have cwm yet installed but I assumed it will be installed at the same time I install the rom because it included it. so if I have hard bricked my phone and I take it to be repaired, will they see I have tried to flash the phone? will it be fixed with guarantee?
Sent from my GT-I9300 using xda app-developers app
But you Flash rom REALLY FOR YOUR PHONE ? And i think next time you need to root the phone and Then install.I say maybe it's CPU is broken so you can go in gurantee and ask them for Repair. I don't know if you hard brick if they Fix but i think They did.
I say look into this thread http://forum.xda-developers.com/showthread.php?t=1891197 You can see countury and city so borrow form you contury and if can City
Paulius7 said:
But you Flash rom REALLY FOR YOUR PHONE ? And i think next time you need to root the phone and Then install.I say maybe it's CPU is broken so you can go in gurantee and ask them for Repair. I don't know if you hard brick if they Fix but i think They did.
I say look into this thread http://forum.xda-developers.com/showthread.php?t=1891197 You can see countury and city so borrow form you contury and if can City
Click to expand...
Click to collapse
Yes I'm sure I was installing a right ROM meant for my phone. The resurrection remix 3.0.9 for I9100. this is what I did exactly.
1. went to stock recovery
2. installed CWM.zip from external SD card.
3. Got into temporary CWM recovery and then made a nandroid backup with success.
4. tried to wipe data but got stuck and rebooted my phone. It was now stuck in the galaxy logo.
5. I went to stock recovery again to install CWM.zip and this time I straight installed the resurrection remix and I got into Aroma installer and everything went fine until on 50% the phone turned off and now doesn't go on.
P.S. I was still on Stock ROM and kernel and recovery when trying to do this. Was using a temporary CWM recovery to install a custom ROM and kernel. I had root access already.
P.S2 I put the charger in and it doesn't even show the battery icon, nothing. and yes the camera is getting hot. Is it a hard brick / dead brick or what ever you call it? if I take it to guarantee, will they fix it or will they be able to see that I damaged my phone myself? thanks
P.S3 can the USB jig work on this problem also?
Sent from my GT-I9300 using xda app-developers app
If it soft bricked i think JTAG will help you
But if not try this:
Try to change battery MAYBE THAT HELP i don't now i gueses(Sorry bad english) i don't know really
Try this:
Step one would be the Jig
Step two would be a paid for JTAG repair
Step three would be a paid for service centre repair
And try to get out battery for about 1 hour
http://forum.xda-developers.com/showthread.php?t=1661909
I will do this when I get home from work, thanks a lot for all the advice.
If anyone has other suggestions, please help. thanks.
Sent from my GT-I9300 using xda app-developers app
andresantos said:
Yes I'm sure I was installing a right ROM meant for my phone. The resurrection remix 3.0.9 for I9100. this is what I did exactly.
1. went to stock recovery
2. installed CWM.zip from external SD card.
3. Got into temporary CWM recovery and then made a nandroid backup with success.
4. tried to wipe data but got stuck and rebooted my phone. It was now stuck in the galaxy logo.
5. I went to stock recovery again to install CWM.zip and this time I straight installed the resurrection remix and I got into Aroma installer and everything went fine until on 50% the phone turned off and now doesn't go on.
P.S. I was still on Stock ROM and kernel and recovery when trying to do this. Was using a temporary CWM recovery to install a custom ROM and kernel. I had root access already.
P.S2 I put the charger in and it doesn't even show the battery icon, nothing. and yes the camera is getting hot. Is it a hard brick / dead brick or what ever you call it? if I take it to guarantee, will they fix it or will they be able to see that I damaged my phone myself? thanks
P.S3 can the USB jig work on this problem also?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
You said The resurrection remix 3.0.9 for I9100 I9100 ist the Samsung Galaxy S2!! Not S3
kaboma said:
You said The resurrection remix 3.0.9 for I9100 I9100 ist the Samsung Galaxy S2!! Not S3
Click to expand...
Click to collapse
I know, I'm trying to flash my girlfriends galaxy s2
Sent from my GT-I9300 using xda app-developers app
andresantos said:
I know, I'm trying to flash my girlfriends galaxy s2
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Ohh, ok I see :laugh::laugh:
@kaboma
Next time Read carrefully and you see it
@andresantos
How the going with the phone ?
Was it on a 4.0.4 ROM? Did you check if it has a bad chip? ie. is susceptible to the emmc bug before flashing?
That could possibly be the cause, although I cant be sure now unless you have her stock rom/kernel details. And if it is, I'm sorry but AFAIK theres no solution to that yet.
Do try getting hold of a USB jig and trying your luck with that first, though.
Hope it works out :fingers-crossed:
Did you try to wipe ANYTHING on stock 4.0.4 kernel ? if you did, then you've been afected by the emmc brickbug and there's no other way to fix it other than replacing the entire motherboard.
Did you try to put your device in download mode (pressing the power button, home button and volume down key) ? If you can get into it, flash a stock rom and problem solved.
Can you enter recovery mode ?
Next time you try to get cwm, just flash siyah and you'll get the whole package (permanent cwm + root + plenty of features) and only after that try to wipe and install custom roms
@Poroto
HE SAID HE CAN"T GO ANYWHERE.
So it's can be Hardbrick or like (Ram's or CPU or Video card is broken) MAYBE
Because i had i problem with CPU it's can't go anywhere it was problem with CPU
Hi there,
I tried to flash a new rom and it some how is stuck on the reboot screen.
Any help in what to do, would be great!
Thanks!
Pull the battery, put it back. Hold button combo to boot to recovery. Flash the ROM again but do not wipe. Reboot and you should be good.
FFR please list which ROM you are coming from and the ROM you are flashing.
Sent from my SCH-I535 using xda premium
Thanks, for your help!
I ended up taking out the battery, and then rebooting it, and it went to the Recovery mode.
I actually did wiped everything all over again, like you were doing it from the start originally, and it seemed to work fine.
I cant even remember what I was coming from, I had it on my Phone for almost two years, and it was old and the battery life was terrible.
I tried RemlCS-JB its not bad, but I think I am going to try another one. Any suggestions? I have been away from this forum for over a year, so anything recent with good battery life and good GPS is ideal.
The rom did not seem to come with an app downloader such as google play, or Clockwork manager.
Anyone know how to get into reboot recovery mode without clockworkmanager?
When I try to download clockworkmanager online it does not let me really download it.
When I try to install a new Auxura rom it states the following:
It says Installation aborted
Above that, it states please switch Edify scripting
Anyone know, if I have to do something else? I am just doing a normal Clockwork Flash.
I wiped the data/factory set, then tried to install the rom
molson24 said:
When I try to install a new Auxura rom it states the following:
It says Installation aborted
Above that, it states please switch Edify scripting
Anyone know, if I have to do something else? I am just doing a normal Clockwork Flash.
I wiped the data/factory set, then tried to install the rom
Click to expand...
Click to collapse
Did you Odin back to stock before trying to flash a ROM that is a previous version of android? It could cause a lot of problems if you don't Odin back to stock first!
Did you flash gapps on the ROM that you said was missing apps etc?
Gapps is a package of Google apps that devas can't include in the ROM.
I wouldn't use ROM manager, in most ROMs, there is an option to reboot to recovery in power menu. You can also power down and use button combo to boot to recovery.
I highly suggest reading through some of the dev threads for any ROMs you are interested in. It will answer most of your questions and prevent future issues.
Sent from my GT-P5113 using xda premium
Oh yeah, it said to flash GAPPS after, but I never did. Where do you get GAAPS?
No, I dont even have ODIN installed on my computer and all of those drivers, so It is something I do not want to do.
It has been 2 years since, I switched, so I randomly flashed to this new one, but I want to try a different one, but seems to get an error.
Ill try a few other roms to see if they work though.
molson24 said:
Oh yeah, it said to flash GAPPS after, but I never did. Where do you get GAAPS?
No, I dont even have ODIN installed on my computer and all of those drivers, so It is something I do not want to do.
It has been 2 years since, I switched, so I randomly flashed to this new one, but I want to try a different one, but seems to get an error.
Ill try a few other roms to see if they work though.
Click to expand...
Click to collapse
You can get the gapps from the op of the ROM thread or go to www.goo.im/gapps
As far as Odin etc
If you are on an ICS or JB ROM and want to go back to a froyo or GB ROM, you need to odin to stock first.
General rule of thumb, you can flash up but to flash down, Odin to stock first.
Sent from my SCH-I535 using xda premium