This is the Q&A Thread for Team Blackout eXtreme Sense5 ROMPlease ask all general questions here.
Beta 1 Now available
Beta 1 is now available check the discussion thread HERE
Do you flash a kernel for the beta or no?
TigerArmor15 said:
Do you flash a kernel for the beta or no?
Click to expand...
Click to collapse
yes you need to flash the included boot image for the beta build
cstayton said:
yes you need to flash the included boot image for the beta build
Click to expand...
Click to collapse
Where's the boot image located because I tried to flash the ROM and I didn't get past the boot screen?
TigerArmor15 said:
Where's the boot image located because I tried to flash the ROM and I didn't get past the boot screen?
Click to expand...
Click to collapse
extract the boot.img from the downloaded zip
make sure you have sdk tools installed
from a command prompt in the platform_tools folder
fastboot flash boot boot.img
fastboot erase cache
fastboot reboot
EDIT: make sure you reboot your device to bootloader (fastboot USB)
How does the RC2 work? If this is my first time using this rom do I have to install both RC1 and RC2?
Yes install RC1 reboot go through the initial setup then reboot to recovery and flash RC2 without wiping as the name implies it is a patch
Sent from my HTC One X+ using xda app-developers app
dev options
I can't seem to locate the developer options...I found the unknown sources, but in 4.1 I had a bunch of other options for a variety of things that I can't seem to find anymore. am I just missing them or are they gone?
gokun said:
I can't seem to locate the developer options...I found the unknown sources, but in 4.1 I had a bunch of other options for a variety of things that I can't seem to find anymore. am I just missing them or are they gone?
Click to expand...
Click to collapse
go to Settings --> About --> Software Information --> More:
Click on build number (roughly 7 to 8 times) you'll see a message that says "you are now a developer"
an voila you have the dev options back in settings
cstayton said:
go to Settings --> About --> Software Information --> More:
Click on build number (roughly 7 to 8 times) you'll see a message that says "you are now a developer"
an voila you have the dev options back in settings
Click to expand...
Click to collapse
Doh! totally forgot about that....it's pretty much exactly the same way I had got them 4.1. thanks, that got me sorted!
AVRCP 1.3 support?
Got a new car, and my One X+ doesn't sync the artist/track info to the stereo while playing music. Google says the phone needs to support AVRCP 1.3 in the bluetooth stack. Do we know if that is part of this ROM?
robbadler said:
Got a new car, and my One X+ doesn't sync the artist/track info to the stereo while playing music. Google says the phone needs to support AVRCP 1.3 in the bluetooth stack. Do we know if that is part of this ROM?
Click to expand...
Click to collapse
this is an issue with android 4.2.2 you can post in the google code thread found here http://code.google.com/p/android/issues/detail?id=48321&sort=-id&colspec=ID%20Type%20Status%20Owner%20Summary%20Stars it mentions the nexus but does apply to all 4.2.2
robbadler said:
Got a new car, and my One X+ doesn't sync the artist/track info to the stereo while playing music. Google says the phone needs to support AVRCP 1.3 in the bluetooth stack. Do we know if that is part of this ROM?
Click to expand...
Click to collapse
a little more info on this:
There’s no denying that the switch to Broadcom’s Bluetooth stack in Android 4.2 has created some stressful situations for frequent users of the short range networking technology. The added attention also raised awareness for some features that are woefully lacking in the OS, something that other OEMs have been working to resolve independently. To a round of applause during the Best Practices for Bluetooth Development session, Sara Sinclair Brody announced Google will finally address two of the most popular requests. Beginning with API level 18, Android will officially support Bluetooth Low Energy (BLE) and AVRCP 1.3.
original article posted here http://www.androidpolice.com/2013/05/15/bluetooth-low-energy-and-avrcp-1-3-coming-to-android-with-api-level-18/
Xposed Framework
Just got everything flashed and it looks great. One thing though. Do I need to factory reset and go through setup again to get the Xposed framework installer, or is there somewhere else I can find it?
Plaguen0g said:
Just got everything flashed and it looks great. One thing though. Do I need to factory reset and go through setup again to get the Xposed framework installer, or is there somewhere else I can find it?
Click to expand...
Click to collapse
its included in the options to flash otherwise gogle search to download the installer
Screen auto-rotate bug?
Howdy,
I got the framework installed by re-flashing, which was no big deal. I was like "hey Sense 5 doesn't suck now".
I'm having one little issue though, which is that I can't get the screen to rotate when I'm in a browser. I've tried Dolphin and Chrome. I was worried that I might've tweaked something in the Sense 5 toolbox, but I can't find anything that seems like it might be related.
Help?
Plaguen0g said:
Howdy,
I got the framework installed by re-flashing, which was no big deal. I was like "hey Sense 5 doesn't suck now".
I'm having one little issue though, which is that I can't get the screen to rotate when I'm in a browser. I've tried Dolphin and Chrome. I was worried that I might've tweaked something in the Sense 5 toolbox, but I can't find anything that seems like it might be related.
Help?
Click to expand...
Click to collapse
go to settings -- displays, gestures and buttons and make sure auto -rotate screen is checked.
cstayton said:
go to settings -- displays, gestures and buttons and make sure auto -rotate screen is checked.
Click to expand...
Click to collapse
That's the first place I went, and it was checked. Call me crazy, but I'm going to try this (probably overkill):
Uncheck the box
Reboot
Check the box
Reboot
:cyclops:
Plaguen0g said:
That's the first place I went, and it was checked. Call me crazy, but I'm going to try this (probably overkill):
Uncheck the box
Reboot
Check the box
Reboot
:cyclops:
Click to expand...
Click to collapse
Nope. Still won't rotate my Touchdown email, Chrome, or Dolphin. Any ideas?
Related
heres the stock rooted deodexed ver of the latest ruu. added in wireless tether
https://beta.androidfilehost.com/?fid=9390034591667978449
Chg log from AP Features/Enhancements
01. Global support enabled
Issues Resolved
01. Let’s Golf 2 v1.2.1
02. Skype video call – color incorrect
03. Lockup
04. Mobile Hotspot shows incorrect number of devices
05. Time displayed after powering off and then right back on
06. BUA+ read requests
07. BUA+ not displaying in Landscape mode
08. Data stall
09. Mobile IM removed
10. Guided tour video can now be found in “Basic Set-up and Usage Videos”
11. Location settings pop-up removed
12. Data widget updated
13. IPv6 default set to “Enabled”
14. VMM version updated to 0.37
15. Static IP
16. VVM notification in “all Messages” tab after deleting
17. VCAST Music – removed MP3 purchase references
Whooooooo yea, def gonna try it out. See if my roshan sim works.
awesome work!
So is this newer than 3.14.605.12...?
I don't want to be a smartass but yes. 4.*.*.* is newer than 3.*.*.*.
bkhorn said:
I don't want to be a smartass but yes. 4.*.*.* is newer than 3.*.*.*.
Click to expand...
Click to collapse
I know it was a dumb question but I thought 3.xxx was the latest ota so I was surprised that there was even a newer one out...
jonbar87 said:
I know it was a dumb question but I thought 3.xxx was the latest ota so I was surprised that there was even a newer one out...
Click to expand...
Click to collapse
so was everyone else lol
Do you have the firmware files from this update? Didn't see firmware.zip in the file you provide.
Sent from my ADR6425LVW using xda app-developers app
izzaeroth said:
heres the stock rooted deodexed ver of the latest ruu. added in wireless tether
https://beta.androidfilehost.com/?fid=9390034591667978449
Click to expand...
Click to collapse
is this for flash in recovery? or hboot?
Flash n recovery. DSB has firmware files on his thread or grab the ruu from AP
Sent from my ADR6425LVW using xda premium
After flashing this ROM, the phone reboots to the white HTC screen and stays there. Any help figuring out what I did wrong would be appreciated.
anyone having this issues
my default browser is keep showing Precise Location Unavailable
and google Talk showing off line and it will not go on line
i have done clear cash and clear data reboot the phone...
PLEASE HELP
HTC Rezound Rooted
beleynn said:
After flashing this ROM, the phone reboots to the white HTC screen and stays there. Any help figuring out what I did wrong would be appreciated.
Click to expand...
Click to collapse
I did mine from a full wipe. Are you current on the firmware as well?
tracker01 said:
my default browser is keep showing Precise Location Unavailable
and google Talk showing off line and it will not go on line
i have done clear cash and clear data reboot the phone...
PLEASE HELP
HTC Rezound Rooted
Click to expand...
Click to collapse
Is it just the browser that cant get a location or is it maps and other gps apps too? not sure about y gtalk is showing offline.. mine seems to be working. ill look into it if i can
tracker01 said:
my default browser is keep showing Precise Location Unavailable
and google Talk showing off line and it will not go on line
i have done clear cash and clear data reboot the phone...
PLEASE HELP
HTC Rezound Rooted
Click to expand...
Click to collapse
Go into ur browser setting and turn on enable location. Mine did same till I did that
Sent from my ADR6425LVW using xda premium
looks good op. Thanks for the .2 deodexed version!
Where is the firmware for this that we can download?
honestly i flashed the ruu first to get the stuff updated
izzaeroth said:
honestly i flashed the ruu first to get the stuff updated
Click to expand...
Click to collapse
Just flahed ruu' flaxshing trhis now ill let you kniow how it turns out.
Could someone with a Jelly Bean ROM, or more specifically Slim Bean on their Vibrant tell me if their voice search works as it should.
Mine listens to what I have to say, loads up the browser, but doesn't actually initiate the search?
FWIW, all other voice actions work, eg: "Send text to xyz" or "Call xyz Home" etc...
Stoked with this ROM (2.9) now that I've sorted out a lot of intricacies, but still finding a few bugs...
Thanks in advance. :cyclops:
Try installing the JB4.2 gapps instead: http://d-h.st/sPL (this patch makes gps stop working on SlimBean rom)
You can also do this manually:
Delete the /system/lib/Velvet.apk and the /system/lib/libgoogle_recognizer_jni.so.
Reboot, then install Google Search from the Play Store.
Sent from my Galaxy Nexus
eksasol said:
Try installing the JB4.2 gapps instead: http://d-h.st/sPL
You can also do this manually:
Delete the /system/lib/Velvet.apk and the /system/lib/libgoogle_recognizer_jni.so.
Reboot, then install Google Search from the Play Store.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Flashed the file and it fully broke search and also broke the clock LOL. Had to Nandroid back.
I'll try the manual method...
EDIT - I actually don't have either of those two files in /system/lib ??
Just flashed the newly released Slim Bean 3.0 and all is fixed. This makes me very happy :laugh:
The Velvet.apk is the actual Google Search app, usually in /system/app if its installed permanently in the system. The lib file is in the /system/lib folder, without it Google Search will not work. When you install Google Search app from the PlayStore, it extract the lib folder to an appropriate folder.
But anyway good that you solved the issue.
eksasol said:
But anyway good that you solved the issue.
Click to expand...
Click to collapse
Thanks!
Yep, Slim 3.0 fixed this issue, but broke my GPS which has been solid on every ROM this phone has run up to this point. Not sure what happened there?
I was thinking of trying out Paranoid, no reason not to now! :laugh:
Install this GPS patch and you're good to go. This and performing the hardware fix made my Vibrant have better signal than my Galaxy Nexus and the XPeria Play which also has GLONASS: http://forum.xda-developers.com/showpost.php?p=33844820
Sent from my Galaxy Nexus
Thanks man. I already have that patch flashed. It does make some difference, without it I now don;t even get the GPS icon come up in the notification bar. With the patch the icon comes up (with the dot flashing) but zero sats in sight/in use
I'm kind of stuck now, this ROM is perfect apart from GPS, I can Nandroid back to 2.9, it had solid GPS but a few other problems, I've also tried flashing Paranoid and CM10 and both come unglued with a status 7 error I can.t get past
I don't have any problem with it on my Vibrant and Galaxy Nexus. Can you try wiping data and cache, then format /system partition, then reflash everything.
To flash other roms you need them to have the compatible version of CWM. So flash the rom once and you will get Status 7, don't reboot but flash it again immediately and it should reboot the phone into a boot loop. Then pull battery and boot back into CWM, you will be in a new version of CWM. Flash the rom the third time and it should work.
Sent from my Galaxy Nexus
Thanks...
I can never get to the bootloop stage, just the status 7 over and over. It's a bit odd.
I've managed to get pretty much this same conversation going in 2 places now, what a spammer
wendleburger said:
Thanks...
I can never get to the bootloop stage, just the status 7 over and over. It's a bit odd.
I've managed to get pretty much this same conversation going in 2 places now, what a spammer
Click to expand...
Click to collapse
If you must, Odin back to stock, update it to CM7, then to ICS Passion rom, then to a JB rom.
Or you can just flash a kernel first, reboot recovery and flash the ROM. I would try semaphore 2.5.0v
???
Good point, that should work.
Sent from my Galaxy Nexus
eksasol said:
Good point, that should work.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Thanks guys, I'll try that when I get a chance. Later today hopefully.
samsgun357 said:
Or you can just flash a kernel first, reboot recovery and flash the ROM. I would try semaphore 2.5.0v
???
Click to expand...
Click to collapse
That did it. Kernel flashed straight in and then the ROM just punched its way straight in :cyclops:
I don't quite understand why flashing the bare kernel first should make a difference but it certainly does.
And hello GPS! Went from dead in the water to locking within 10 seconds indoors?
Safe to say I'll be sticking with this ROM unless I find something really broken in it.
Thanks Guys.
The error was because of recovery mismatch. Some people don't get the error from it, it will just flash a d bootloop. Flashing the kernel first, gives you the proper recovery version.
???
Sprint Moto X [XT1056] Stock ROMS
By using any of these you agree that I am not responsible for ANYTHING that can or may happen to your phone
Click to expand...
Click to collapse
Like this guy said:
iKrYpToNiTe said:
Word to the wise if you don't know how to use RSDLite or Fastboot to restore your phone then leave this thread now please!
Click to expand...
Click to collapse
-----------------------------------------------------------------
KIT KAT 4.4.4
System Version: 212.44.28
Software update 08/2014
Code:
[B]DETAILED ENHANCEMENTS:[/B]
Android™ 4.4.4, KitKat® - Android 4.4.4, KitKat, is the latest release of the Android platform. This release includes several stability, framework and security fixes in addition to accuracy improvements to the power profile.
Camera - Improved image quality - Improved camera image quality including better consistency of exposure, more realistic flash coloring, improved photos in low light conditions using front camera.
Camera - Pause video recording - Added the ability to pause video recording with a convenient pause/resume button on the viewfinder.
Updated Phone dialer - Updated Phone dialer with a new graphical layout and colors to improve consistency and usability.
Motorola Alert application - New Motorola Alert application sends periodic alerts with your location to your selected contacts. Now available for download from the Google Play Store.
ROM LINK
212.44.28
md5: d1fb4c2259855abf74dfadbad5ccdbc2
FIRMWARE LINK
LINK
-----------------------------------------------------------------
BIG thanks to:
iKrYpToNiTe
chad.goodman
NineInchNails
Rizal Lovins
ibanez7
motofirmware.center
JustCMH
HOT-SPOT UNLOCK:
iKrYpToNiTe said:
All you have to do is add net.tethering.noprovisioning=true to your build.prop file and then you can remove or freeze the entitlement check app if you want to. Sprint model requires ro.mot.tether_dun_required to change from 1 to 0.
For people who don't want to mess with modifying their build.prop file or use xposed. I made an app which requires Root, that will run a setprop command to bypass the check until you reboot. If you want it to last after a reboot you can select apply of boot to run the command after every reboot. This was tested and confirmed by cvhovey thanks to him for testing it for me, since I have free tethering. This is my first app so I hope you Enjoy it! I want to say thanks to jcase's slapmymoto and the developer of adaway, I used their github sources as references when I couldn't get something working. Also androidicons for the icon template, and Poliva for setpropex, and jduck for getting setpropex working on KitKat.
Download Links
v1.2 http://www.androidfilehost.com/?fid=23501681358557764(v1.2 is signed with a different key than v1.0/v1.1 so it will display a msg box telling you this just click okay)
Click to expand...
Click to collapse
RECOVERY LINKS
CWM Advanced Edition- PhilZ Touch
TWRP
SUPERUSER LINKS
SuperSU
CWM Superuser (Koush)
DID YOU MAKE AN EXPENSIVE BRICK?
[HOW-TO] Resurrecting A Bricked Moto X
FEW WAYS TO GET BACK TO STOCK
Easy Guide to Restore Stock Firmware on Moto X using RSD Lite
Moto X Toolkit v1.4.3 [Backup/Restore,Drivers,Return to stock,Root,Bootani]
Script FlashFirmware (simple and safe method to flash firmware)
Getting a moto x back to stock on mac os x
BAD BATTERY DRAIN LATELY? TRY THIS
hardware reset of the processor and terminates all running commands
LEAVING THIS HERE IN CASE I FORGET HOW TO TAKE A DUMP
Code:
[B]dd if=/dev/block/platform/msm_sdcc.1/by-name/system of=/sdcard/System.img.ext4
dd if=/dev/block/platform/msm_sdcc.1/by-name/boot of=/sdcard/Boot.img[/B]
Thanks for this! Thanks soo much for the hard work!
FINALLY! The first rom for the Sprint variant :').... I Love you! haha.
They are both up. md5's should be posted right, they were manually entered. I'm carving pumpkins with the boys, so........hopefully all is good. If not, let me know and I'll attack it when able to.
AbstractXart said:
FINALLY! The first rom for the Sprint variant :').... I Love you! haha.
Click to expand...
Click to collapse
pfft, and mine was what?
looks good gokart
shabbypenguin said:
pfft, and mine was what?
looks good gokart
Click to expand...
Click to collapse
Just trying to get things going...lol. Didn't see anything for Sprint ver, must have missed yours? BTW....I seen a shabby looking penguin on a program to turn system.img into system files in the kithcen......is that you?
gokart2 said:
Just trying to get things going...lol. Didn't see anything for Sprint ver, must have missed yours? BTW....I seen a shabby looking penguin on a program to turn system.img into system files in the kithcen......is that you?
Click to expand...
Click to collapse
nah, the last big script i did for people was teh first nexus toolkit, nowadays i hop around trying to help out unloved devices (hence teh name of the team i made Official Unloved Devices Hit Squad ). people needed this anyways, my stock rom was based on the pre-ota camera fix apparently. i had considered getting this phone on republic wireless so i wanted to scope out how development was coming, saw nothing was going on and figured id help out .
shabbypenguin said:
pfft, and mine was what?
looks good gokart
Click to expand...
Click to collapse
Wha?! I never saw it Shabby. My bad, let me rephrase,
FINALLY! The second rom for the Sprint variant :').... I Love you! haha.
Hey guys, I just wanted to update and say it won't boot on the Verizon dev edition like the T-mobile rom will. It freezes for me on the Moto Earth boot animation. Noo! Well darn, I was wanting to try the sprint rom to see if I could get google wallet tap to pay working on my vzw dev phone since no one has figured out how to make tap to pay work on the non-sprint variants.
I booted the deodex version just fine on my vzw Dev edition. I wiped my data and wiped cached before flashing. I didn't try g wallet
Sent from my XT1060 using xda app-developers app
skiwong20 said:
I booted the deodex version just fine on my vzw Dev edition. I wiped my data and wiped cached before flashing. I didn't try g wallet
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
YES!!!! It worked!!! LOL. Anyway, have you/anyone noticed anything when trying to alter the stock boot.img? Seems like anything I tried (not a whole bunch really) with the kernel/boot.img made it non-bootable? Pretty much if it hits the bootloader unlocked screen and doesn't vibrate.....its a no go? Wondering if theres some type of checksum for the boot.img? Not too sure about wallet ATM. Don't really use it, and this is based off the OTA so....I'd assume it should be fine? I remember some stuff way back on this, may have to step back and see if there's something to utilize. This isn't my first rodeo.....but it's the first one I've entered.:laugh:
gokart2 said:
YES!!!! It worked!!! LOL. Anyway, have you/anyone noticed anything when trying to alter the stock boot.img? Seems like anything I tried (not a whole bunch really) with the kernel/boot.img made it non-bootable? Pretty much if it hits the bootloader unlocked screen and doesn't vibrate.....its a no go? Wondering if theres some type of checksum for the boot.img? Not too sure about wallet ATM. Don't really use it, and this is based off the OTA so....I'd assume it should be fine? I remember some stuff way back on this, may have to step back and see if there's something to utilize. This isn't my first rodeo.....but it's the first one I've entered.:laugh:
Click to expand...
Click to collapse
what command are you using to pack the boot.img?
skiwong20 said:
I booted the deodex version just fine on my vzw Dev edition. I wiped my data and wiped cached before flashing. I didn't try g wallet
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
Yeah I wipe three times before flashing and I wiped cache and dalvik again before booting. I wonder what the issue is. I downloaded the odex and not deodex but I don't see it being the difference between booting and freezing. Hmm. I'm back on the T-Mobile rom now. I'll have to try again with the deodex tomorrow
shabbypenguin said:
what command are you using to pack the boot.img?
Click to expand...
Click to collapse
Was just using the kitchen tool. Anytime I touched the boot.img it wouldn't boot up..... Or it would not vibrate at the splash screen, boot up, but not "see" user touches on the screen. Acted like the digitizer was totally off. Something I noticed is if it vibrates at the splash, it was good. No vibrate, definitely something would be wrong. Going to take my time with it next week.
jimmypop13 said:
Yeah I wipe three times before flashing and I wiped cache and dalvik again before booting. I wonder what the issue is. I downloaded the odex and not deodex but I don't see it being the difference between booting and freezing. Hmm. I'm back on the T-Mobile rom now. I'll have to try again with the deodex tomorrow
Click to expand...
Click to collapse
I recommend wiping system and data too and trying. Just make a backup first. And/or try using your normal boot.img instead of the one in the zip.
gokart2 said:
Was just using the kitchen tool. Anytime I touched the boot.img it wouldn't boot up..... Or it would not vibrate at the splash screen, boot up, but not "see" user touches on the screen. Acted like the digitizer was totally off. Something I noticed is if it vibrates at the splash, it was good. No vibrate, definitely something would be wrong. Going to take my time with it next week.
Click to expand...
Click to collapse
i take it then you arent packing the Device tree file to the boot.img.
http://pastebin.com/tSGxTmYq save this script, run it against stock boot.img. youll get a DTB.img, extract your boot.img, edit what you want in ramdisk or swap zimages. then use a modified mkbootimg to include the dtb file as part of it all
gokart2 said:
Was just using the kitchen tool. Anytime I touched the boot.img it wouldn't boot up..... Or it would not vibrate at the splash screen, boot up, but not "see" user touches on the screen. Acted like the digitizer was totally off. Something I noticed is if it vibrates at the splash, it was good. No vibrate, definitely something would be wrong. Going to take my time with it next week.
I recommend wiping system and data too and trying. Just make a backup first. And/or try using your normal boot.img instead of the one in the zip.
Click to expand...
Click to collapse
I got the sprint deodex rom booting on my vzw dev edition doing like you said. But sadly I found google wallet would not work. It just sat saying "finishing up a few things." So I guess unfortunately there is a hardware issue preventing wallet from working on the non-sprint variants. That sucks!!!
I don't understand why but I noticed between the t-mobile, verizon, and sprint roms that the signal bars are slightly different on every one. Sprint's seems to be stretched out a little more and have an extra bar or two. I hate all of them though because the grey has some funky white lines through it where the separations are instead of being solid grey. I don't know what was wrong with the stock android signal bars that none of the carriers wanted them
I have a question regarding safestrap, can I use it to unlock my bootloader and just flash this to my nand? I dont want to waste my space on rom slots :\
d4mi3n said:
I have a question regarding safestrap, can I use it to unlock my bootloader and just flash this to my nand? I dont want to waste my space on rom slots :\
Click to expand...
Click to collapse
Honestly have no clue about SS. I would have to say no. No sure what needs to be done for it to be SS flashable.
Added 4.4 links. Thank abiezer for letting me link to his deodex 4.4 build HERE!
I plan on adding the SPRINT specific firmwares, and more in due time.
Hello World,
I have been on pac_quincyatt-nightly for a while now, my last version/update was pac_quincyatt-nightly-20140710 and had camera issues (resolved) but screen flickering, which XDA helped me and mentioned go into developer options and check HW Overlay box....having similar issue in latest update but not as bad. Flickers when using keyboard on any app, and wallpaper flickers.
1. how to keep HW overlay option permanently checked?
2. Anyone else have random freezing? (I leave roms/settings stock and close/exit unused apps constant)
sincerely,
The Noob
Pac_QuincyATT-Nightly-20140825
4.4.4RC-1
3.0.101-Cyanogenmod-g21fdfb2 (Monday 25 aug 14)
hehe figured out how to get developer options by accident honest truth...
si1entONE said:
Hello World,
I have been on pac_quincyatt-nightly for a while now, my last version/update was pac_quincyatt-nightly-20140710 and had camera issues (resolved) but screen flickering, which XDA helped me and mentioned go into developer options and check HW Overlay box....having similar issue in latest update but not as bad. Flickers when using keyboard on any app, and wallpaper flickers.
1. how to keep HW overlay option permanently checked?
2. Anyone else have random freezing? (I leave roms/settings stock and close/exit unused apps constant)
sincerely,
The Noob
Pac_QuincyATT-Nightly-20140825
4.4.4RC-1
3.0.101-Cyanogenmod-g21fdfb2 (Monday 25 aug 14)
hehe figured out how to get developer options by accident honest truth...
Click to expand...
Click to collapse
Download and flash this in recovery.. http://forum.xda-developers.com/showthread.php?t=2741733
Its an aroma installer with many options..one being disable he overlays..FYI..uber kernel never ran great for me with PAC nightlies. So I just stuck with original kernel during aroma install.
Don't forget to thank pollution.
Gil81 said:
Download and flash this in recovery.. http://forum.xda-developers.com/showthread.php?t=2741733
Its an aroma installer with many options..one being disable he overlays..FYI..uber kernel never ran great for me with PAC nightlies. So I just stuck with original kernel during aroma install.
Don't forget to thank pollution.
Click to expand...
Click to collapse
Thank you for the link, directions are simple a little to simple to be true. I installed what I wanted and even flashed cache as it was an option. A noob I am and now I have "the process com.android.phone has stopped" now I can not get rid of it. Going back into recovery and see what I can do. Last resort a whole device reflash and then install this patch piece by piece (I only selected what is needed 3 items).
si1entONE said:
Thank you for the link, directions are simple a little to simple to be true. I installed what I wanted and even flashed cache as it was an option. A noob I am and now I have "the process com.android.phone has stopped" now I can not get rid of it. Going back into recovery and see what I can do. Last resort a whole device reflash and then install this patch piece by piece (I only selected what is needed 3 items).
Click to expand...
Click to collapse
Reflash the ROM of choice..clean install ( wipe cache, dalvik cache, data, and system ) not internal or external sdcard.
Let ROM boot and chill for about ten minutes..then reboot recovery and flash pollution aroma. Don't flash the uber kernal..or any other. Just pick disable hw overlays and a boot animation, if you want. Then pick clear cache and dalvik and reboot. Should be good to go. Let me know how it goes.
si1entONE said:
Thank you for the link, directions are simple a little to simple to be true. I installed what I wanted and even flashed cache as it was an option. A noob I am and now I have "the process com.android.phone has stopped" now I can not get rid of it. Going back into recovery and see what I can do. Last resort a whole device reflash and then install this patch piece by piece (I only selected what is needed 3 items).
Click to expand...
Click to collapse
Gil is giving some solid advice. The only thing I might add is flashing the rom once by itself, then flash the rom again with the gapps. you can get 2 different results from 2 different flashes. It merely helps embed the rom in a bit better.
I rarely have issues with my cleanliness.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
SAC23 PORTED MOAR N3
tdunham & rompnit
… Proudly Present …
[M]other [O]f [A]ll [R]oms ..aka.. MOAR
Take control of your phone
OP HOST LINK
MY MIRROR HOST LINK # 1
MY ANDROID FILE HOST # 2
MD5 74ad7725fa79dabfb7853fce52b614e1
WHATS BROKEN
CAMERA S5
GUYS MAKE SURE IF IT DOESENT BOOT JUST REMOVE BATTERY AND REBOOT U MAY HAVE TO DO IT 2 TIMES BUT IT WILL BOOT[/SIZE]
Click to expand...
Click to collapse
This is the first of many guides I will be posting and keeping up with.
It will be utilized for Q&A FAQ and HOW TO so we can keep the development thread for development purposes.
Post your questions and Myself or other knowledgeable users of Sac23 ROMS will answer as quickly as possible.
So ......
FAQ:
what do i do if its not booting on start up A- pull battery then restart.(IF YOU HAVE A REMOVABLE BATTERY)
after booting im getting a services have stopped wait or close A- pull the battery and restart.(IF YOU HAVE A REMOVABLE BATTERY)
the tweaks open then close help? A- need to deny super user for it then go in and change what u want then re enable superuser for it
how to install
install like u would any rom then wait for 2 min ( if wont boot )
pull battery and restart then you'll see optimizing apk's count down.(IF YOU HAVE A REMOVABLE BATTERY)
***Guys This Is A Port So remember it will have small glitches here and there but all in all should be stable ***
For starters HOW TO INSTALL a ROM by SAC23
Installing with TWRP (View All Supported Devices>>> Find TWRP for your device):
Philz can be used and I will post instructions for it later https://www.mediafire.com/folder/qc3z1c59s8g03/PHILZ
This assumes that you ALREADY have TWRP Recovery installed on your phone and you know how to use it.
Download the ROM of choice...move it onto the EXT SD CARD.
VERY IMPORTANT>>> Move all music, pics, important data from internal storage to the ext SD card and/or to your pc, etc. because during this process, the internal will be completely erased.
Recommended Method to Flash SACS Custom ROMS using TWRP
Boot into TWRP
Select Wipe > Advanced Wipe
Select Dalvik, System, Data, Internal Storage, and Cache. Swipe to Wipe (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Select Format Data, Type YES, Press GO. (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Swipe to Factory Reset. (do this THREE TIMES)
Go back to MAIN menu and STOP HERE !!!!! READ NEXT STEP CAREFULLY....
[*]Select REBOOT INTO RECOVERY mode and Swipe to Install Super User. DO NOT REBOOT INTO SYSTEM!
[*]AFTER THE PHONE REBOOTS INTO RECOVERY:
NOW proceed with installing The ROM
Select Install Zip, Drill down to Sac23's Rom you want to flash, and Swipe to install.
Follow on screen instructions (if there are any).
When prompted, REBOOT SYSTEM.
THE FIRST BOOT WILL TAKE A MINIMUM OF 20 MINUTES..... SOME DEVICES EVEN LONGER...
.
.
HAVE PATIENCE
When the Home Screen appears and it is obvious that the install has completed, allow the phone to settle for another 10 minutes BEFORE you begin setting up your personal preferences and accounts.
If everything seems normal, set your phone up and profit.
IF IT WON'T BOOT....(IF YOU HAVE A REMOVABLE BATTERY)...try pulling battery and replacing battery then restart phone and you should see "Android Updating"
After setting up your personal info and you are now ready, the first thing you should always do after flashing any ROM is to go to settings, system updates, and refresh/update your PRL & PROFILE then reboot the phone. Second thing is go to settings, more networks, mobile networks, network mode, and select LTE/CDMA.
saved 1
New Recovery update for NOTE 3
bigbiff said:
Can you test http://techerrata.com/bigbiff/openrecovery-twrp-2.8.5.0-hltespr.img.tar
If it works well I will push it out.
Click to expand...
Click to collapse
wormy987123 said:
Booted up made back up and was able to restore. Anything else you want tested?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
saved 2
For future use
saved 3
For future use
saved 4
For future use
saved 5
For future use
Cannot install as OP describes.
Only way I've found is to flash @sac23 TWLP 5.0 V2 then dirty flash MOAR LP.
Biggest issue I've found, to make this not a daily driver is when calling, other people on line cannot hear a word you're saying.
Back to N4 port.
Nickitt said:
Cannot install as OP describes.
Only way I've found is to flash @sac23 TWLP 5.0 V2 then dirty flash MOAR LP.
Biggest issue I've found, to make this not a daily driver is when calling, other people on line cannot hear a word you're saying.
Back to N4 port.
Click to expand...
Click to collapse
@Nickitt
We are working in the incall issue with @sac23
Just out of curiosity. With this being an S5 port and if anyone remembers the original S5 port. Anyone having issues with the mic. and sound issues. Have you guys messed with any of the sound options in mod control? Like normal, loud, extreme sound mods. Not sure if @sac changed them, if he did not then when trying them on the note 3 it will break the mic. because they are meant for the S5. Just asking. I have been running this since this afternoon and have had many calls today and no issues here. I have not messed with the sound mods.
fsunoles101 said:
Just out of curiosity. With this being an S5 port and if anyone remembers the original S5 port. Anyone having issues with the mic. and sound issues. Have you guys messed with any of the sound options in mod control? Like normal, loud, extreme sound mods. Not sure if @sac changed them, if he did not then when trying them on the note 3 it will break the mic. because they are meant for the S5. Just asking. I have been running this since this afternoon and have had many calls today and no issues here. I have not messed with the sound mods.
Click to expand...
Click to collapse
You would be the first person that has flashed this Rom to have working sound/mic in calls. Yes, people can receive and call perfectly fine but when you talk, no one can hear you.
I've flashed this Rom 3 times now differently and messed with some system applications in hopes of fixing this issue myself but to no extent.
If you can actually talk to the other person please tell us how you went about installing. Thanks.
sac23 said:
incoming sound fix test v1
let me know guys
http://www.mediafire.com/download/3ez7uil20zktcjz/moar_incoming_call_sound_fix_test.zip
Click to expand...
Click to collapse
Sent from my SM-G900P
Please try this test for in call hearing loss and report back
rlmiller said:
Sent from my SM-G900P
Please try this test for in call hearing loss and report back
Click to expand...
Click to collapse
Does work for me. Perfect, thank you.
When using automatic brightness it seems at though it goes all the way dim so you'll have to un-check auto and set it to your liking.
When disabling the s finder and quick connect in MOAR settings, it is still there when on the lock screen and you pull the notification bar down.
When pulling s-pen out, you cannot use pen on screen doesn't recognize you're touching the screen with the pen.
It realizes you've pulled it out from the slot but that's about it.
Has anyone have bluetooth working? I haven't been able to get to work.
Jose Reyes said:
Has anyone have bluetooth working? I haven't been able to get to work.
Click to expand...
Click to collapse
Here you go dude. Go here. Download V2 and flash in recovery. Should take care of your Bluetooth issues.
http://forum.xda-developers.com/showthread.php?t=2938607
Anyones phone crashing? Its been happening several times a day. It says something like security watchdog bit.
Sent from my SM-G900P using XDA Free mobile app
fsunoles101 said:
Here you go dude. Go here. Download V2 and flash in recovery. Should take care of your Bluetooth issues.
http://forum.xda-developers.com/showthread.php?t=2938607
Click to expand...
Click to collapse
This patch did not work on my device... thanks Went back to Sac's Note 4 ROM....
Edit: I reflashed the ROM waited until it was completly setup then rebooted and flash this patch and it does work
Working?? It is for me.
Ok so this is what I did, None of this is my work, I took no part in any of this development, I think I just got lucky.
Wipe
Wipe
Wipe
Installed Sacs ported rom V2, no reboot straight back into Recovery
Installed Sacs Moar Port, no reboot straight back into Recovery
Installed Sacs Moar Port fix for the mic problem
Wiped cache and davlik rebooted system
Went thru the entire setup made sure things were good and made a backup
Then I dirty flashed this right over....
http://forum.xda-developers.com/gal...-tw-note-4-port-5-0-1-darklord-rom-1-t3017604
This is the link for the 1.4 file https://mega.co.nz/#!XYw0TArb!7DoNDNHAK-1H0RBcyUMR0qPPtdarKCtR6uA7QTKeiDw
It kept just enough of Sacs rom to work... bluetooth works, data works, S pen works, Camera works, Lte works......
It is no longer a MOAR Rom its a Note 4 Lollipop port with alot of worknig stuff.
I'm about to do it in reverse and see what happens.. wish me luck.
rancherochido said:
Ok so this is what I did, None of this is my work, I took no part in any of this development, I think I just got lucky.
Wipe
Wipe
Wipe
Installed Sacs ported rom V2, no reboot straight back into Recovery
Installed Sacs Moar Port, no reboot straight back into Recovery
Installed Sacs Moar Port fix for the mic problem
Wiped cache and davlik rebooted system
Went thru the entire setup made sure things were good and made a backup
Then I dirty flashed this right over....
http://forum.xda-developers.com/gal...-tw-note-4-port-5-0-1-darklord-rom-1-t3017604
This is the link for the 1.4 file https://mega.co.nz/#!XYw0TArb!7DoNDNHAK-1H0RBcyUMR0qPPtdarKCtR6uA7QTKeiDw
It kept just enough of Sacs rom to work... bluetooth works, data works, S pen works, Camera works, Lte works......
It is no longer a MOAR Rom its a Note 4 Lollipop port with alot of worknig stuff.
I'm about to do it in reverse and see what happens.. wish me luck.
Click to expand...
Click to collapse
Good luck brother let us know how it goes
fsunoles101 said:
Here you go dude. Go here. Download V2 and flash in recovery. Should take care of your Bluetooth issues.
http://forum.xda-developers.com/showthread.php?t=2938607
Click to expand...
Click to collapse
I extracted the missing files from this zip and placed them in the appropriate folders, fixed permissions, rebooted and bluetooth works!
Thanks for the great find!
hey guys can i go to back to a mja modem from nh7 ?