Related
Use it at your own risk!
This mod is NOT for XXJPM!
It has been made from the framework files of a JPQ and JPS, so on an odexed JPM rom it causes bootloop!
It's for XXJPQ and XXJPS.
So it wont make the Browser.apk crash like the older 5 Lockscreen Mod did it.
(Check out the last part of this post!)
(You must be rooted and know how to push files to the phone. And one more thing: first of all you should check the free space in /system (e.g. if you use RootExplorer), especially on the odexed roms.)
5 Lockscreen Mod and Extended Power Menu for Odexed XXJPQ and XXJPS.
5 Lockscreen Mod and Extended Power Menu for Deodexed XXJPQ and XXJPS.
(Framework-res.apk and Settings.apk are stock themed.)
Android LockScreen for odexed/deodexed JPS/JPQ* rom and also for odexed XWJPK is attached below.
* 'android.policy' has been made from JPS, but it works on JPQ too
HOW-TO:
5 Lockscreen Mod
It’s started from the point you have flashed a clean, stock JPS or JPQ via Odin: the device is already booted and you have unplugged the USB cable from it.
Getting root access
- Go to ’Settings > Applications > Development’ and enable ’USB debugging’
- Plug the USB cable back into the phone > run SuperOneClick.exe > press ’Root’ and wait
- When the ’Test?’ dialogue is popped up, say ’Yes’ > you can close SuperOneClick
- Your device has been rooted
- Directly after these steps, do the followings:
Pushing modified files to the phone
- Download the suitable zip for your odexed or deodexed JPQ or JPS rom
- Extract the downloaded zip
- Navigate into the extracted folder
- Run ’push_5lckscr....bat’ and wait*, your device will have rebooted
- Modded files are already pushed to the phone, now you can use your favourite lockscreen and the extended power menu
Of course there are other methods, RootExplorer etc.
*If you are on an odexed rom and see something like this in cmd: "failed to copy 'system\framework/framework.odex' to '/system/framework/framework.odex': No space left on device" and "rm failed for /system/framework/framework.jar, No such file or directory", don't panic, it's normal due to the low free space.
History:
Hi again! Now I have come with a very nice and well known mod. However this one is for people who want to have the 5 Lockscreen Mod and Extended Power menu, but don't want to have a deodexed rom!
So you can download this mod for your odexed XXJPQ/XXJPS from above. I've just realized that the only reason for me to deodex a rom is because of those damn lockscreens and the extended power menu. But I could not find this mod for odexed roms, so I had to odex it by myself.
---
Hello to All, I've attached an android.policy.odex for those who want stock Android lockscreen on their odex XWJPK.
---
Hi All!
After I had deodexed a stock (only rooted) XXJPQ rom, I tried to apply the 5 lockscreen mod on it. Seemed like everything was good... But when I had opened the "Internet", it force-closed immediately (nor factory reset didn't help).
So I had started to search the reason of this issue. After a while I figured out that the FCing of the Internet app was because of the "non-JPQ" framework.jar. So I took the JPQ's framework.jar and added a .smali file to its classes.dex what is necessary for the extended power menu (com\android\internal\app\ShutdownThread.smali).
The result: working 5 lock screen mod with extended power menu on JPQ without crashing of the Internet app!
If interested, you can download it from here. Framework-res.apk and Settings.apk are stock themed files, so you can delete that lines from the batch... Actually, the relevant file is the framework.jar.
Try 5lockscreen mod
mY custom rom has stock lockscreen :L
Stock lockscreen for stock XWJPI and XXJPQ: http://www.megaupload.com/?d=SNJ3ZI17
Credits by Halco
Here is the way to add Stock lockscreen on a firmware.
But care, on this step :
4. Replace the contents of this method with the attached file getLockScreenMode.txt.
Dont do this, juste replace on you method getLockScreenMode()Lcom :
PuzzleLock by TapLock
GlassLock by TapLock
Then follow the rest of the steps
I tried this tutorial with XWJPK, but when I try to deodex the file I always get this error:
Code:
Error occured while loading boot class path files. Aborting.
org.jf.dexlib.Util.ExceptionWithContext: Cannot locate boot class path file core
.odex
at org.jf.dexlib.Code.Analysis.ClassPath.loadBootClassPath(ClassPath.jav
a:237)
at org.jf.dexlib.Code.Analysis.ClassPath.initClassPath(ClassPath.java:14
5)
at org.jf.dexlib.Code.Analysis.ClassPath.InitializeClassPathFromOdex(Cla
ssPath.java:110)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:98)
at org.jf.baksmali.main.main(main.java:278)
Can you help me, please?
Which file do you try to deodex? Do you mean all of them? In that case, I use this one, so I recommend. It always works for me. Sorry, but I don't understand exactly the source of your problem (maybe I'm too tired)... What's your goal at all? 5 lockscreen mod on a deodexed XWJPK?
Sry, but I don't understand you exactly, too
I tried this Tutorial and therefore I need android.policy.odex and so a odexed framework, right?
But I'm sorry, at this topic I'm totally new at this topic. It would be nice if you could upload the modded files for JPK...
I am using stock rom jpm rooted by default..i want this 5 lock screen..
Can I get that..?
Please tell me the step by step procedure..
Sent from my GT-I5800 using XDA App
JPM is no problem!
You can use Kitchen 2.0!
GalaxyDrei said:
JPM is no problem!
You can use Kitchen 2.0!
Click to expand...
Click to collapse
Please give me the link to download kitchen 2
Sent from my GT-I5800 using XDA App
Sry, it was deleted...
I think it also should work with Kitchen 3.0...
Ask benzyniarz1
GalaxyDrei said:
I tried this tutorial with XWJPK, but when I try to deodex the file I always get this error:
Code:
Error occured while loading boot class path files. Aborting.
org.jf.dexlib.Util.ExceptionWithContext: Cannot locate boot class path file core
.odex
at org.jf.dexlib.Code.Analysis.ClassPath.loadBootClassPath(ClassPath.jav
a:237)
at org.jf.dexlib.Code.Analysis.ClassPath.initClassPath(ClassPath.java:14
5)
at org.jf.dexlib.Code.Analysis.ClassPath.InitializeClassPathFromOdex(Cla
ssPath.java:110)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:98)
at org.jf.baksmali.main.main(main.java:278)
Can you help me, please?
Click to expand...
Click to collapse
You got this error because when you tried to deodex android.policy, you forgot to pull all the .odex files from /system/framework. For some reason it is not enough to pull only the android.policy.odex
No, I pulled the whole framework, so I can't understand why I get this error!
Strange... By the way, I've uploaded the modified file you asked for.
Thanks a lot
Is there any tutorial about pushing this to the phone? I didnt see it anywhere...
I will update my first post as soon as I have enough time. It will be a few days since now I have to work...
Hi,
Can you make a only Android Lockscreen for XXJPS? I dislike the Extended Powermenu and the Option of more lockscreens, but only want Android Lock.
Hopefully someone can provide me that!
Stylooo
Nice job could you please post some basic instructions for porting this to some other stock(odexed) rom I know how about compiling and decompiling using smali etc just tell me which files to edit .
Sent from my GT-I5800 using Tapatalk
Flashlight Quick Toggle Mod TW 4.4.2 NE4 ( De-Odexed )
[FONT="]This mod was made for the Sprint L600 Mega and is for the [/FONT][FONT="]STOCK[/FONT][FONT="] TW ROM 4.4.2 NE4. I do not recommend flashing to a Custom Rom as the ROM may contain other special permissions/policies ( if added ) that the Rom Developer may have implemented or even may have been required to add so the Custom Rom may run or function properly. [/FONT][FONT="]
[/FONT][FONT="]DISCLAIMER:[/FONT]
[FONT="]By YOU, the USER, flashing this file or manually pasting to modify your Android System, YOU understand and know what YOU are doing. I nor anyone will be held liable nor responsible for YOUR doing if your phone bricks. As always, as is suggested by many and myself, please make sure you perform a complete[/FONT]
[FONT="]NANDROID BACKUP[/FONT]
[FONT="]before flashing and/or modifying your OS or the mentioned stock .jar file. I also suggest YOU keep a separate copy of the stock .jar file handy, like in your External SDcard, if the phone decides not to boot up. Knowing this, YOU assume all responsibility for what happens as YOU, the USER, know and comprehend what YOU are doing and understand the consequences or severity of damages that can be brought to your [/FONT][FONT="]device by flashing or modifying your OS incorrectly. [/FONT]
[FONT="]You[/FONT][FONT="] Have Been Warned !![/FONT][FONT="][/FONT]
[FONT="]What's Needed/Recommended:[/FONT]
[FONT="]Rooted Devise [/FONT][FONT="]( to extract the needed files Manually for backup )[/FONT][FONT="]
[/FONT][FONT="]Custom Recovery [/FONT][FONT="]( TWRP or CWMR/PhilZ for Flashing the ZIP )[/FONT][FONT="]
[/FONT][FONT="]Aroma File Browser/Explorer[/FONT][FONT="] ( type browser in CWMR/PhilZ Recovery to manually move the files )[/FONT][FONT="]
[/FONT][FONT="]If you can do it via ADB Commands then all power to you.....[/FONT]
[FONT="]I am providing [/FONT][FONT="]BOTH[/FONT][FONT="] stock Modded Sprint [/FONT][FONT="]( SystemUI.apk )[/FONT][FONT="] and [/FONT][FONT="]( SecSettings.apk )[/FONT][FONT="] files [/FONT][FONT="]below.[/FONT]
Flashlight Toggle Zip Flashable zip ( Tested - Not working - Removed )
SecSettings.apk
SystemUI.apk [FONT="]
[/FONT]
[FONT="]What To Do:[/FONT]
You have two choices on installing the .apk files. You can either Flash the ZIP in your Custom Recovery or you can use some form of File Explorer via in Custom Recovery ( like the [FONT="]Aroma File Explorer[FONT="] for CWMR [/FONT][FONT="]) or other means to copy & paste or push the .apk files to [/FONT][FONT="]system/priv-app/[/FONT][FONT="]. If you decide to do this manually, you will then need to set the file permissions to the modified apk files to[/FONT][FONT="] 0644 [/FONT][FONT="]and/or [/FONT][FONT="]check mark off[/FONT][FONT="] as the picture provided below shows using the method chosen through the root permissions it provides. You can rename the stock .apk files with " .bak " at the end so you don't have to delete them from the priv-app folder if you so choose. You will also need to add the “[/FONT][FONT="]Flashlight[/FONT][FONT="]” value in your settings.db file located in data\data\com.android.providers.settings\databases described in the link [/FONT][FONT="]here[/FONT][FONT="] . After just clear " [/FONT][FONT="]cache[/FONT][FONT="] " and " [/FONT][FONT="]dalvik cache[/FONT][FONT="]"ONLY after flashing or manually pasting the mod if you so choose.[/FONT][/FONT]
[FONT="]Words of caution[/FONT][FONT="].....[/FONT][FONT="]if you attempt to do this manually and are still actively booted in your Android OS while modifying or deleting the .apk file/s, there may be a chance that your phone will immediately reboot and you will not be able to boot into the OS and remain stuck as the apk’s is/are no longer visible to your OS. This is why you need to do this before booting up like in recovery.[/FONT]
[FONT="]Other Galaxy Mega Variants[/FONT][FONT="] - [/FONT][FONT="]Disclaimer[/FONT][FONT="]:[/FONT]
[FONT="]I do not know if this will work on other carriers/models as they all are different and can or will have different permissions/policies set forth so you will be trying at your own risk. The .apk files are easily modified and the required files are easily found by searching the forums as I have. If these .apk file worked for a different Samsung Galaxy Mega devise then please advise me and give proper credit. Use, extract, exhume, etc the files as you choose or please. [/FONT][FONT="]================================================== =================[/FONT][FONT="]
Thanks and credits go out to :[/FONT]
[FONT="]@rompnit
@tdunham
@CNexus[/FONT]
[FONT="]for the How-Too's, find’s and files needed for this MOD and the help provided. If I missed someone please PM me or let me know.....[/FONT]
[FONT="]&
Google & Samsung.......
[/FONT][FONT="]
[/FONT][FONT="]
[/FONT][FONT="]Enjoy! [/FONT][FONT="]
[/FONT][FONT="]More Stock TW mods for the Sprint Mega L600 are sure to come![/FONT]
If anyone can test the flashable zip and/or check the updater-script to make sure it will back up the apk's and write the values in for you please do so and check back please.
I thought on stock rom you can toggle flash light while screen is off. just hold volum up botton
Yes4g4me said:
I thought on stock rom you can toggle flash light while screen is off. just hold volum up botton
Click to expand...
Click to collapse
I don't remember having the ability to turn it on or off in my settings with KitKat 4.4. The only way I knew was to use Xposed App to do so. I rather use an actual Toggle built in the stock System located in the Pull Down section.
Zip flash did work getting a update error
dyra502 said:
Zip flash did work getting a update error
Click to expand...
Click to collapse
What type of update error? Also did or did not flash? Thanks.
May end up just making this as a manual push mod instead of flashing.
DarkAngel said:
What type of update error? Also did or did not flash? Thanks.
May end up just making this as a manual push mod instead of flashing.
Click to expand...
Click to collapse
update -binary error and i try to push it to and a no go. but i also had my hotspot unlock that may be the reason it not working
dyra502 said:
update -binary error and i try to push it to and a no go. but i also had my hotspot unlock that may be the reason it not working
Click to expand...
Click to collapse
You had the hotspot mod done on the Mega?
DarkAngel said:
You had the hotspot mod done on the Mega?
Click to expand...
Click to collapse
yes and it works for sprint
dyra502 said:
yes and it works for sprint
Click to expand...
Click to collapse
Oh nice. Was it the same as the Note 2 or Galaxy S4/5? Also was this on KK NE4 and do you mind sharing the services.jar file from your Mega?
The HotSpot Mod should not affect the flashlight quick toggle. You did also edit the setting.db file as well correct and add Flashlight; to the line right?
DarkAngel said:
Oh nice. Was it the same as the Note 2 or Galaxy S4/5? Also was this on KK NE4 and do you mind sharing the services.jar file from your Mega?
The HotSpot Mod should not affect the flashlight quick toggle. You did also edit the setting.db file as well correct and add Flashlight; to the line right?
Click to expand...
Click to collapse
yes I,m on ne4 and here what i flash and that was it
dyra502 said:
yes I,m on ne4 and here what i flash and that was it
Click to expand...
Click to collapse
Thank you sir. I will look into modding the services.jar for this. Also there should not be a problem for you to push these to your system, set permission to the files and then reboot. Also have to make sure you modify your settings.db file so it will show up in your toggles.
Hi All !!
I was using this ROM for quite a while, thought i'll share my work with you all.
This is for i9200, But i am not sure if it would work for i9205.
Its based of stock i9200 i9200XXUDNK1 KitKat 4.4.2 from sammobile.com.
Its a mixture of Odexed and deodexed.
==============================================
The S5 features it has are,
Systemui of S5
Note 4 launcher (actually S5 launcher, i just themes the page navigator icons to look like Note 4)
Lockscreen of Note4
Settings of S5
Note 4 weather
Some S5 apps like Magazine, Group play, Group Camcoder, S5 gallery, S5 music, S5 contacts and dialer, SPlanner, SVoice, Voice Recorder, etc etc..
===============================================
Oops! lot of Note 4 mentioned above, but mainly its all got from S5.
Currently i am trying to search forums on how to make an Update.zip Rom so that you can all just flash it.
All i have now is just a backup of my Rom which i made using PhilzTouch 6.48
Please see the screen shots. attached.
Internet connection is slow.. so please gimme time to upload.
Will post the links soon on mediafire.
ROM Download Link & steps to flash
ROM Links and Steps to flash.
Modem and Boot.img included in the download links.
Two methods:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
First Method
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
==================================================================================
1: Download the Backup named "2015-01-16.07.49.38_KOT49H.I9200XXUDNK1.7z" from Mediafire using the link below.
Link = https://www.mediafire.com/folder/qrtmbymle0c0d/Bevin_ROMs
The file has an extension 7z.
Extract the folder inside the zip file using 7Zip to your desktop.
Make sure the contents are extracted to a folder with the name " 2015-01-16.07.49.38_KOT49H.I9200XXUDNK1 " on your desktop
There are totally 12 files inside " 2015-01-16.07.49.38_KOT49H.I9200XXUDNK1 " folder.
2: Download PhilzTouch recovery version 6.48 and flash it
Reboot to the Phiztouch recovery and go to philzsettings-> uncheck md5 verification (thanks to Fredo2000)
3: Backup your current ROM (full backup - if in case anythin goes wrong) to sdcard or external sdcard (sdcard1).
4: Reboot to your current rom and connect your phone to the computer.
5: Now from your computer... Go to Computer->locate your phone-> go to memory card->clockwordmod folder->backup folder->paste here (the folder " 2015-01-16.07.49.38_KOT49H.I9200XXUDNK1 ) which was extracted on your desktop.
6: Reboot phone to Philz Recovery.
Click Wipe Factory Reset -> Clean to install a new ROM.
Click Backup and Restore - Restore from sdcard1
you should see the rom you pasted from your desktop here.
Restore 2015-01-16.07.49.38_KOT49H.I9200XXUDNK1 ROM
7: Reboot phone
8: Phone will boot with the new Lollipop Screen.
9: Wait for a minute till everythin looks fine and then go to settings add wifi networks and add account - Google
10: All the S5 customization will be intact in this method.
==================================================================================
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Second Method
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
===================================================================================
1: Download the CWM Flashable zip ROM named " S5ROMforMEGAi9200_17Jan2014.zip " from the below link
Link : https://www.mediafire.com/folder/qrtmbymle0c0d/Bevin_ROMs
2: Reboot to PhilzTouch Recovery
3: Wipe Factory Reset Phone -> clean to install a New ROM
4: Install Zip -> install from sdcard/sdcard1 -> S5ROMforMEGAi9200_17Jan2014.zip and flash.
5: Reboot to recovery again.
6: Re-root system using Philz touch miscellaneous settings.
7: setup wizard comes up and proceed till you get to the home screen.
8: You will find the navigation bar. Do not disable it in build.prop instead follow step 9.
9: Install Xposd Framework apk (search it and download it from google), open the app, install framework. reboot.
10: Install GravityBox KK apk from the download section of xposd app. Install it. Enable it in modules. Restart
11: go to gravitybox app reduce the size of the navbar to like 0 or 1 .. prefered is 0 using the slider.
12 That will get rid of the navigation bar (this is important for the dialer) and wil stil have the overflow menu enabled everywhere.
13: download AppSettings from xposed app under download section and install it. enable it in the modules section. reboot.
14: open App settings app and look for contacts.
15: change the dpi from 0 to 320 and save (this is important for the phone dialer to become full screen)
16: thats pretty much you have to do. everythin else is present already in the ROM.
17: to explore the various features.. long press the notification toggle icons.. it ll open a new menu which is not present in the settings.
18: using xposd app you can download even floating windows to make windows float like note 4.
===================================================================================
Some of the Apps are preloaded as I like it that way. You can uninstall them as you please.
This ROM has no bugs so far, so if you do find bugs - I will be happy to fix them and release another ROM later on.
If you Factory Reset your phone, you might lose certain customizations done on XPosed Framework. (Hence i suggest you not to unless you know what you are doing)
====================================================================================
If something does not work fine related to network bluetooth or Wifi (most unlikely) - Flash XXDNK1 modem.
====================================================================================
:good:
This ROM is stock Samsung ROM i9200XXUDNK1 (latest release of 4.4.2 from samsung) with S5 built in apps.
I use the stock baseband (modem) i9200XXUDNK1 and have face no issues so far.
Features of this ROM - Unlike any other
Things you will notice on this ROM
=======================================================================
1: I made a unique tweak with air view turned on, Thers always a feedback on the screen whereever your finger moves be it lockscreen or any other window.
2: Power Saving in Settings shows Different options and Power Saving in Notification Toggle shows greyscale options.
3: Viper audio to boost the Audio output.
4: 31 toggles. Even S5 doesn't have so many toggles. But 31 looks best for our big screen.
5: funcitonal Quick connect and SFinder.
6: Watch on remote control on notification panel when turned on.
7: Life Companion (smaller font)
8: First available Ported Note 4 look launcher with no stupid pullup app to screw with it.
9: Note 4 weather widget (fully transparent)
10: Group Camcoder works
11: All the Apps are updated to their latest release.
12: Device Status - Official (but do not update)
13: No branding what so ever. I dint do it as i hate it when i have to see others Name or their logos on my phone. Its so annoying!!
14: Double tap the staus bar to sleep
15: 4 way reboot options
16: Haptic feedback enabled by default with sound for air view.(power saving can disable it)
17: Android Version shows 4.4.4 (but its just a tweak)
18: S5 icons on settings and S5 settings.. all working.. no bugs!!
19: First working S5 keyboard for our phones with all working functionality.
20: Some awesome things i did to the ROM that i am forgetting right now to mention.
21: I did no tweaks to the performance of the ROM as I dont wanna play with that part. You can do it yourself.
22: Floating windows and all other tweaks are part of XPOSD
=======================================================================
Why didn't i share this earlier?
I was too busy flashing lollipop ROMs..and just realised this was better than everythin else.
So, spent more time fixin problems on the phone and now i share my work with all of you.
Hope you Enjoy my ROM as i do - but then it really doesn't matter to me if you do not.
If you dislike my work, just remember that no one ever shared a stupid S5 ROM before while all the other phones like S3 s4 and Note 2 Note 3 etc all had developers making S5 and note4 roms for these devices and none for us.
Feel free to rip my ROM apart and do whatever you want with it.
Thanks to Blekota for his Samsung S3 ROM. It made my Mega alive!!
Thanks to unclefab too.
You don't need to make a zip if you are rooted.
From your phone, open your android terminal and type:
su
dd if=/dev/block/mmcblk0p20 of=/sdcard/system.img
Wait a bit, after a while you'll have your system.img in your sdcard (but make sure you have sufficient storage as it's a pretty big file).
Then, to anyone wanting to push it on one's phone, put the img file on your sd and type:
su
dd if=/sdcard/system.img of=/dev/block/mmcblk0p20
You can do it from adb too, just type adb shell before su.
If the phone doesn't boot after flashing the img you'll have to wipe wipe data and cache.
Did you keep the original boot.img or did you flash the S5's?
In case you used the S5's boot.img and want to add it to your rom, type this:
dd if=/dev/block/mmcblk0p13 of=/sdcard/boot.img
@bevinabraham :
my connection is pretty slow too so I'd like to ask you 2 questions before I attempt to download:
1-did you replace the whole system/app and the whole system/framework folders?
2-how is the multi windows function? Any difference compared to the stock Mega 4.4.2?
Do you have that note 4 feature that enables to resize full screen windows from the screen edges (swiping down from either top left or top right)?
The proper way is to use an android kitchen (e.g. http://forum.xda-developers.com/showthread.php?t=633246) but it seems that may be out of your wheel house. There are also ways to make a full update zip of your ROM via nandroid and some play store apps.
Sent from my GT-I9205 using Tapatalk
unclefab said:
You don't need to make a zip if you are rooted.
From your phone, open your android terminal and type:
su
dd if=/dev/block/mmcblk0p20 of=/sdcard/system.img
Wait a bit, after a while you'll have your system.img in your sdcard (but make sure you have sufficient storage as it's a pretty big file).
Then, to anyone wanting to push it on one's phone, put the img file on your sd and type:
su
dd if=/sdcard/system.img of=/dev/block/mmcblk0p20
You can do it from adb too, just type adb shell before su.
If the phone doesn't boot after flashing the img you'll have to wipe wipe data and cache.
@bevinabraham :
my connection is pretty slow too so I'd like to ask you 2 questions before I attempt to download:
1-did you replace the whole system/app and the whole system/framework folders?
2-how is the multi windows function? Any difference compared to the stock Mega 4.4.2?
Do you have that note 4 feature that enables to resize full screen windows from the screen edges (swiping down from either top left or top right)?
Click to expand...
Click to collapse
Hi,
Actually thats not what i am trying to do.
How to people get the starting new set up wizard etc when you just flash a rom? how do i export all the folders such as the whole system folder with the boot.img in it into a update.zip?
any code for that?
To answer your second question..
I did not replace the whole System APP PrivAPP and the framework folders as its a larger resolution that ours..
So, I just ported only a few files from the system app and a few files from the priv app and a lot of lib and etc files and twframework files.
Then i modded the stock frameworkres.apk file from the framework folder with the s5 frameworkres,apk .
So its pretty much the whole that we see outside is all of s5 stuff..but everythin under it which we cant see (are the stock functions)
and its not themed if thats what u meant.. the lockscreen is of note4..
The floating windows i got using Xposed framework. i can resize it..
The multiwindow is stock multi window.. from the DNK1 rom.. its slightly diff that the old ones i guess as u can add and edit items,.
AndroidSlave said:
The proper way is to use an android kitchen (e.g. http://forum.xda-developers.com/showthread.php?t=633246) but it seems that may be out of your wheel house. There are also ways to make a full update zip of your ROM via nandroid and some play store apps.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Yes.. i ll try this.. i saw it in the recovery of PhilzTouch.. to clone the ROM.
trying it now.
The boot.img, if I understood well you kept the one from the mega so you can forget that part.
Then, there's no need for any starting wizzard, people just flash your system.img and get whatever tweaks you put inside, that's it.
You can of course use android kitchen, but the method I gave you is by far the easiest and the fastest.
Nowadays I use this method, I make my rom the way I like it and add this or that, then I make an .img image ready for flashing, and I only use android kitchen if I need to edit my boot.img.
Lat but not least, once you have a system.img you can pass it through 3 commands and make it an odin flashable file for people that aren't rooted.
Reagrding note 4, I'm not interested in lockscreen stuff, I just wanted to know if the multi windows function in your rom is the same than in the stock mega Kk or if it has new features.
unclefab said:
The boot.img, if I understood well you kept the one from the mega so you can forget that part.
Then, there's no need for any starting wizzard, people just flash your system.img and get whatever tweaks you put inside, that's it.
You can of course use android kitchen, but the method I gave you is by far the easiest and the fastest.
Nowadays I use this method, I make my rom the way I like it and add this or that, then I make an .img image ready for flashing, and I only use android kitchen if I need to edit my boot.img.
Click to expand...
Click to collapse
oh okay.. i guess i ll do this then.
thanks.
Right now its still creating an update zip...but i can see a line that says system.ext4.tar.a
so..probably thats not what i expected.
i ll use your method..
thanks a lot.
wow pls port to gti9205. me to try port this to gti9205
djraz said:
wow pls port to gti9205. me to try port this to gti9205
Click to expand...
Click to collapse
I am onot sure if it would work on i9205, but then there is no reason why it should not work as this rom does not have the baseband/modem file etc.. just the boot and the system.
hy man . used base stock MegaKatI9205Deodex v18 and added s5 apps features so work nex apps : svoice,calculator bug layout, loockscreen partiality, launcher partiality bug icons, and can't change wallaper, file manager, calculator bug layout, music player, video player,group palyer,browser,album,bootscreen, app manager but not work keyboard.. gallery don't work.. so now i need fix next bug. layout. so i need redit dpi
s5 rom for mega
Uploading my Rom to mediafire.
Will post the links soon by tomorrow afternoon.
bevinabraham pls share with me ur systemui.apk ,tw or launcher4,loockscreen,dialer+contacts,secsettings,camera. u used for ur porting..and keyboard. because i have somproblem with this files for my porting.. pls send me and reply
djraz said:
bevinabraham pls share with me ur systemui.apk ,tw or launcher4,loockscreen,dialer+contacts,secsettings,camera. u used for ur porting..and keyboard. because i have somproblem with this files for my porting.. pls send me and reply
Click to expand...
Click to collapse
Hi,
I just saw ur S5 sway ROm for i9205.
Congrats dude.
So both i9200 and i9205 will have the S5 rom features. Awesome
i got the apps frm here
http://forum.xda-developers.com/showthread.php?t=2690997
pls share me this files.. because u some files edit and putt in ur rom.. so i need them for mi pack pls.i write u in pm message
Hey man..(bevinabraham)... This becomes fantastic certainly!! If it can hardly wait for my Mega to the S5. To make Mega
Micha71 said:
Hey man..(bevinabraham)... This becomes fantastic certainly!! If it can hardly wait for my Mega to the S5. To make Mega
Click to expand...
Click to collapse
Hi thanks dude.
Wait for 24 hours.. i ll reach office tomorrow and upload the ROM (they have fast internet connection)
Good luck with your ROM :good:
blekota pls support me djraz and bevinabraham to recompile file system ui, dialer+call e secsettings.calculatyor and tw layout display..
HI all
It's for the 3830 model i'm not sure if work on any other device
Few months ago I finally could change my tablet's battery icons so I want to share with you if you want to try
You need:
-A cwm backup only if a fc appears (then reboot in recovery, advanced restore, restore system)
-Xposed gravitybox module working (it's no necesary but is for avoid the bug appears
-a rom that works (for easy way) I recommend deodexed I cannot remember if works on odexed roms
-Rooted and knowledge about flashing through fastboot (for hard way)
If I miss something I will edit
This mod allows you to change the battery icons of your tablet and works, but it has 1 bug that I don't know if can be solved:
this is the thread where i found how to do the mod
The bug is that gravitybox can't change the color of the battery icon, but you can change the battery icon and this includes the color so it's not a big problem.
I'll try to ask for support at least for the screen freeze, but for now i'll tell you the method for installing it
There are 2 ways:
------->First of all have an updated backup if something goes wrong you need to restore!<---------
Then download my modded apk i'will attach all of they
easy way
is modifying a .zip file (you can do it even in your tablet but is slower and you need like 1.7 Gb free. In computer use zip editor I.e. Winrar)
1.- Extract somewhere in you computer,tablet
2.- Once made it erase systemui.apk and systemui.odex (if is odexed)from extracted directory/system/priv-app
3.- add my modded apk
4.-create zip ( recompile the files that you extracted)
5.- flash it in cwm recovery like a fresh rom
You can also edit the zip without extracting just go to the directory erase the files that I metion below then add my systemui.apk modded and wait for finish then do step 5.-
hard way
is when you don't want to break your head with you computer or you don't have it or don't want to use etc.
1.-locate my modded systemui.apk with a root Explorer then copy or cut
2.- go to root/system/priv-app/
3.- select systemui.apk and systemui.odex and erase them (maybe give you constant fc so you need precision and be patient
4.- paste my systemui.apk
5.- set permissions to rw-r-r (I'll attach a screenshot for how to do it)
6.- reboot and if you're lucky your battery icons will change wothout fc's
If you have fc from step 3.- this will take you a while only continue
If works go to NOTE 1 for avoid the bug and everything will go fine
Maybe hard way is too much
I attach only those that work maybe I need suggestions about the charging animations
problems check post 2
NOTE 2:
tis mod also allow to modules to change the battery icons with an xposed module xbattery themer If I not wrong. Also a theme compatible can change your battery icons maybe is a problem but is not a bug this is normal
NOTE 3
The first screenshot is v1.5 from attached zip then v2.0 and then 2.5
There are 2 versions In v2.0 only changes the charhging anim
Not working?
I'm not guarantee that work on your tablet but maybe there are mistakes
1.- check the permissions don't follow the image the root explorers aren't the same
If really doesn't work you need to restore a backup or flash a non-modded rom
The problem may be caused in odexed roms so you need to deodex and try again
for those that don't have a cwm recovery
If you don't have a recovery use fastboot and flash a stock .Img.gz rom
(turn off your tablet, boot in fastboot)
(fastboot flash system drag and drop file to command prompt, enter)
Or use the tethered cwm recovery for backup-restore your current rom
It's at your own risk and I'm not responsible for damages but it's too much it's only an apk
There is dual boot thread, I'm still without test it but if you have it and the dualboot allow you to go to the root of the tablet you can overwrite the apk for a non-modded skipping the steps but again i'm not sure if this is possible
I have some doubtss......mighht be a noob doubt
Will it work in 4.4.2???
Will i get any problm...later like force closing???
I dont have a cw recovery now
So cant flash unsigned files
Sent from my Venue 8 3830
rinshid said:
I have some doubtss......mighht be a noob doubt
Will it work in 4.4.2???
Will i get any problm...later like force closing???
I dont have a cw recovery now
So cant flash unsigned files
Sent from my Venue 8 3830
Click to expand...
Click to collapse
Let me anwer your questions
Yes it's only for 4.4.2
Only if not works you'll have several fc becuase systemui can't start or your wallpaper will be black because system couldn't install the mod during the boot
I posted in post #2 if you don't have cwm recovery
Flash a stock rom in .gz format through fastboot sorry my mistake but as it says will return your system to stock (without xposed and root) so I don't recommend it
Ok:thumbup:
I will test it soon
Sent from my Venue 8 3830
UPDATE!!!
The problem of the screen freeze is gone and the Google search ring displays so you don't need xposed for trying to fix
After all it was a problem in apktool but I found it and the problem and now work perfectly
But I haven't time to make with other battery icons, for now I'll upload the systemui.apk that I'm using also it have other things but hope you like it.
I am sure that now can be decompiled the app and rebuild with other icons and xml.
Sorry for the fast reply I don't have Internet but I needed to reply that the bug has gone
Thought i'd make flashable zip to enable or disable the nav bar.
You don't need to search into the build.prop and change values...the zip does it for you
Working on : A2017X
It's scanning for those "lines" and replaces them with the proper ones. The scripts makes a build.prop backup itself just in case
Don't know if it works on U or CN. As this zip is fairly harmless someone can test, but out of experience the U and CN(don't know for sure) models are stubborn on removing or adding the nav bar...
INSTALL:
1. Download A2017G navbar remover or A2017G navbar enabler EDIT : or the aroma A2017G NavBar Df!nR
2. Put zip into root extSD ( or intSD )
3. Boot into TWRP
4. Install
5. Reboot & Done !
You'll always be able to revert. No worries.
edit 02.12.2018 : also look here as to a complementary method
E N J O Y !
REALLY JUST FOR FUN
I made an aroma installer for the 2 of them. So just choose the one you want
LINK : A2017G Nav Bar Df!nR
^ @ rayster, funny thing you released this mod, it was me who recently opened a forum asking how to remove/hide the navigation bar.
I am still waiting for my Axon to arrive, still unsure what version it is. All I know is I got an sms message saying the package is out for delivery.
Then I'll run the toolkit to unlock the bootloader, gain root and recovery. Finally I will be able to flash your rom.
kanej2006 said:
^ @ rayster, funny thing you released this mod, it was me who recently opened a forum asking how to remove/hide the navigation bar.
I am still waiting for my Axon to arrive, still unsure what version it is. All I know is I got an sms message saying the package is out for delivery.
Then I'll run the toolkit to unlock the bootloader, gain root and recovery. Finally I will be able to flash your rom.
Click to expand...
Click to collapse
Yeah, that day was navbar-day. Thought i made just a flashable zip for it as a sort of excercise. It's just for fun you know
Perhaps today is D-day, right ?
raystef66 said:
Yeah, that day was navbar-day. Thought i made just a flashable zip for it as a sort of excercise. It's just for fun you know
Perhaps today is D-day, right ?
Click to expand...
Click to collapse
Yes, phone received. I got the European G version. I have been trying to unlock the bootloader via the toolkit but keeps failing. I will try manually to unlock the bootloader. Keep getting EDL device is not connected! error.
Does this works on Oreo B01 or B12?
ramnkc said:
Does this works on Oreo B01 or B12?
Click to expand...
Click to collapse
It does. On some it doesn't. Try it. It's harmless and sets 2 values in build.prop.
raystef66 said:
It does. On some it doesn't. Try it. It's harmless and sets 2 values in build.prop.
Click to expand...
Click to collapse
Just flashed and its working!
One more question.... How to make nav bar translucent or transparent background all the time?
Works on U model
Thank you worked on alot of roms!
raystef66 said:
Thought i'd make flashable zip to enable or disable the nav bar.
You don't need to search into the build.prop and change values...the zip does it for you
Working on : A2017X
It's scanning for those "lines" and replaces them with the proper ones. The scripts makes a build.prop backup itself just in case
Don't know if it works on U or CN. As this zip is fairly harmless someone can test, but out of experience the U and CN(don't know for sure) models are stubborn on removing or adding the nav bar...
INSTALL:
1. Download A2017G navbar remover or A2017G navbar enabler EDIT : or the aroma A2017G NavBar Df!nR
2. Put zip into root extSD ( or intSD )
3. Boot into TWRP
4. Install
5. Reboot & Done !
You'll always be able to revert. No worries.
edit 02.12.2018 : also look here as to a complementary method
E N J O Y !
Click to expand...
Click to collapse
Do you have this navigation bar zip file?
Does anyone have this navigation bar zip file?