[Q] Lag when i unlock screen, Samsung GT-I9300 - Galaxy S III Q&A, Help & Troubleshooting

Hello everyone. I flashed Android Revolution HD 40.0 on my Samsung GT-I9300 international, everything works fine, just i have an incredible delay on unlocking screen.
If i don't use phone for 15 minutes or more he will unlock with a lag of 5-10 seconds or so.
When i was on Android Revolution HD 32 i didn't have this problem. So, please either someone give a tip on how to solve that, or give a link where i can find Android Revolution HD 32. I did google for it before posting here, it appears that is no place to download it from.

flruleu said:
Hello everyone. I flashed Android Revolution HD 40.0 on my Samsung GT-I9300 international, everything works fine, just i have an incredible delay on unlocking screen.
If i don't use phone for 15 minutes or more he will unlock with a lag of 5-10 seconds or so.
When i was on Android Revolution HD 32 i didn't have this problem. So, please either someone give a tip on how to solve that, or give a link where i can find Android Revolution HD 32. I did google for it before posting here, it appears that is no place to download it from.
Click to expand...
Click to collapse
ARHD 40 is based on a bugged release. To resolve the delay you can install a rom based on mk6 (i suggest you to wait s4 revolution v12) or install another kernel over your rom. In this case i suggest you GoogyMax kernel which allow to resolve all my problem

thank you.

Related

[Q] Android revolution hd 6.3.1,big size and hd video songs lagging and getting stuck

Hi, i have recently flashed my htc desire hd with Android revolution Hd 6.3.1 custom ROM, here is the link
http://forum.xda-developers.com/showthread.php?t=840040
Everything is woking great since i have flashed it, except for the video part. Before flashing my phone could play vvideos of of any size say 200 0r 400 mb without lagging. But after the flashing the same videos do not play. i have tried almost all the known players, i have also formatted my sd card. other than that the Rom seems to have no problem. Could anyone please help
sanjayvks said:
Hi, i have recently flashed my htc desire hd with Android revolution Hd 6.3.1 custom ROM, here is the link
http://forum.xda-developers.com/showthread.php?t=840040
Everything is woking great since i have flashed it, except for the video part. Before flashing my phone could play vvideos of of any size say 200 0r 400 mb without lagging. But after the flashing the same videos do not play. i have tried almost all the known players, i have also formatted my sd card. other than that the Rom seems to have no problem. Could anyone please help
Click to expand...
Click to collapse
I had ARHD 6.3.1 installed once, never had this issue.
Your best bet is to post either in the dev thread or in the rom's Q&A thread.
Could you suggest a more better rom than this one as you have already used this one for htc desire hd
Figured it out
Upgraded to 7.0.0 and also figured out the the video issues.

[Q] Serious Issue with the Boot Screen :( Please Help

Hello
I installed the KANG ROM found in the following thread [ROM][KANG]CM9 ICS 10.1 WiFi Preview 02/08/12 and the boot screen seems to refresh/scroll endlessly. Once the lock screen comes up (which scrolls endlessly as well), if I press the power button to turn screen off and then switch it back on, the display is stable.
I use the Korean Version SHW-M380W (Galaxy Tabl 10.1 Wifi 32GB). I tried Galaxy Task Slim 13.1 and other ICS Roms found on XDA, but the result is same.
Can someone please let me know a fix for this?
Thank you so much.
Ping
Ping...
Doesn't anyone else face this issue?
I don't think it supports the korean tab
Hmm I saw that if I restore /boot from stock image backup in HC 3.2 this issue was solved. Tried and tested it and worked fine. But when I upgrade to ICS, there is no /boot to restore from. Just tried it with the Hc 3.2 /boot and the system hanged.
Probably different ramdisks as ics kang is based of devices they own and custom via the model as the Korean tab is not part of it you may need to request or hope someone donates one to them, and if it was the official update of ics it would work but these are custom made builds based off the source ics package given by Google so it isn't an official update like HC3. 2
Sent from my GT-P7500 using Tapatalk
Thanks
Thank you for your reply.
have you tried romans?
Romans
You mean the AOKP one right? Yeah, I have tried it, but the same issue
I mean, the one from here: http://forum.aokp.co/page/releases
Build 28 to be specific. Strangely, the same (screen jumping) issue was there with CWM as well. And pershoot was kind enough to make a new CWM just for Korean tab. I wonder what changed though (Am quite a newbie to rooting and stuff, so dont really know where to go to)
The pershoots CWM which fixed a screen jumping issue for CWM (not for boot screen though) is found here: http://forum.xda-developers.com/showthread.php?t=1360588
Thanks bro.
So its all fixed?
Oops, I missed the whole point Actually, I had tried that after the [ROM][KANG]CM9 ICS 10.1 WiFi Preview 02/08/12 version, but the issue persisted. Its only with the bootscreen that this issue exists. Once we go to the lock screen, the issues still exists, but a screen off -> screen on (using the power key) quickly restores the screen back to the non-fluctuating version.
Wait, why havent you used kang by Roman? Its already coming to 4.0.4
Build 29
Thanks Misledz: I tried out Build 29 located in the following page:
http://forum.aokp.co/page/releases
Still the problem persists
I think you need a clean wipe, like generally wipe everything off it, a factory reset and stock firmware flash, then see if it persists.
Only this solution worked for me on EU version:
http://forum.xda-developers.com/showthread.php?t=1555984
Tried that but still no luck
snpetit said:
Only this solution worked for me on EU version:
http://forum.xda-developers.com/showthread.php?t=1555984
Click to expand...
Click to collapse
I guess I have the same recovery. The issue is not with the scrolling recovery, but with the scrolling lock screen. Did it get fixed for you as well? Am using AOKP build 30.
Thank You!!!!
snpetit said:
Only this solution worked for me on EU version:
http://forum.xda-developers.com/showthread.php?t=1555984
Click to expand...
Click to collapse
Thank you so very much!! The issue which was bothering me for the last three months is now solved. Life saver..

[Q] compatible rom for karbonn smart tab 3 blade

Greetings to All,
I have got this 7 inch tablet that goes by the name "karbonn smart tab 3 blade".
This has neuclear evb board with ingenic cross kernel.
It features ics 4.0.4. However I am looking for a way
to backup the stock rom and also looking for other compatible rom if there is any.
The reason is that the stock rom is incapable of using video and voice feature in google talk. I know there are other softwares capable
of doing that but the major pain is that the google plus app has stopped working. It started going in a never ending login loop and then
it simply crashed. This crash happened after I installed a non stock talk apk .
Any help with the backup process and compatible rom is highly appreciated.
JB Sucks
xda.supratim said:
Greetings to All,
I have got this 7 inch tablet that goes by the name "karbonn smart tab 3 blade".
This has neuclear evb board with ingenic cross kernel.
It features ics 4.0.4. However I am looking for a way
to backup the stock rom and also looking for other compatible rom if there is any.
The reason is that the stock rom is incapable of using video and voice feature in google talk. I know there are other softwares capable
of doing that but the major pain is that the google plus app has stopped working. It started going in a never ending login loop and then
it simply crashed. This crash happened after I installed a non stock talk apk .
Any help with the backup process and compatible rom is highly appreciated.
Click to expand...
Click to collapse
DId u find any? cause I updayed to jelly bean and it hangs like hell and has loads of bugs!

[Q] Allsharecast dongle

Hi Guys,
I have a question, what a surprise
Im trying to get my allsharecast dongle to run for 4 days now and still its not working.
The system:
Samsung galaxy s3
Android 4.1.2
Boeffla Kernel (3.0 beta 7)
Ultima Rom (tried on v13 now v14)
TouchWizz
I have tried different things. Samsung Stock Kernel (Instelled with the Rom insteller - Not working)
I have tried Triangle away, because I have seen some posts where people say it worked with it. - Not working
Also I have tried omega rom v.44? I dont know exactly (Android 4.1.2)
Before a new rom or kernel I did always full-wipe.
Now my question is. Is it possible or not to get the Dongle run with a custom.rom?
If yes, what rom and what should I.exactly do?
(This is the first time I run a cfw on my sgs3, so I do not really have much experience, so I really need a step by step description )
I know this is not the first time people are asking about the dongle and cfw, but I really didn't find any detailed information about if its working or not and what to do if it still always disconnects.
Hope you can help me
Bye, Haris
Read this : http://forum.xda-developers.com/showthread.php?t=1872278
Sent from my Nexus 7 (2013)

[Q] Sony Xperia Active CM10 No Camera

Hey there guys,
I recently hit a problem on rooting and installing cm10 on an Xperia Active.
Here the actual facts:
Android 4.1.2,
CyanogenMod: 10-20131006-NGIHTLY-satsuma,
Kernel- Version: 2.6.32.61-MESA-HYBRID-v4.8 (seems to be the only kernel working since I receive a black screen using the kernel delivered in the cm10 Rom from above)
So here the Problem: There is no camera app on the device right now. Installing the Honami- Camera doesn't work either.
Any ideas? I'm pretty new in this Rooting/ Custom- ROM stuff, so please don't kill me if the solution is obvios.
Regards glu
super.glu said:
Hey there guys,
I recently hit a problem on rooting and installing cm10 on an Xperia Active.
Here the actual facts:
Android 4.1.2,
CyanogenMod: 10-20131006-NGIHTLY-satsuma,
Kernel- Version: 2.6.32.61-MESA-HYBRID-v4.8 (seems to be the only kernel working since I receive a black screen using the kernel delivered in the cm10 Rom from above)
So here the Problem: There is no camera app on the device right now. Installing the Honami- Camera doesn't work either.
Any ideas? I'm pretty new in this Rooting/ Custom- ROM stuff, so please don't kill me if the solution is obvios.
Regards glu
Click to expand...
Click to collapse
Hey,
me again. Fixed the problem by installing the "Googleeditioncamera" Thought it wasn't working, but I just forgot to reboot. Hope someone can use this information some day.
regards glu

Categories

Resources