Hi,
following the instructions on cyanogenmod.org, I have flashed CWM (using heimdall), then made a cwm backup of the stock rom, then installed CM10.1.3 stable. Works great.
Now I'm trying to restore my stock backup temporarily because I forgot to export my address book and my text messages (stupid me, I know). Of course, I have made a cwm backup of my CM first.
I wipe everything (factory reset in cwm), then restore my stock backup in cwm, and it goes through smoothly. However, when I reboot, after the Samsung logo there's the boot sound, and the screen goes blank completely. Nothing happens after that.
I can reboot (hold down power button forever), go back to cwm, and restore my CM backup, and everything works perfectly again. But I can't get my stock backup to work.
Can anyone help? Or is there a way to find the address book or text messages in the cwm backup files manually?
Thanks!
kingstah
What firmware was you on? What's you're nandroid bkup firmware?
andrewwright said:
What firmware was you on? What's you're nandroid bkup firmware?
Click to expand...
Click to collapse
You mean Android version? I believe stock was 4.04 (official OTA update quiet some time ago), the cwm Version is 6.06, I think. And CM10.1is Android 4.1.
Best thing you can to get it running is flash stock with Odin and forget about 4.0.4 nandroid. You see the 4.0.4 firmware has a bug which may brick you're phone. Don't factory reset whatever you do. Can you not mount as USB is recovery and get the data that way.?
andrewwright said:
Best thing you can to get it running is flash stock with Odin and forget about 4.0.4 nandroid. You see the 4.0.4 firmware has a bug which may brick you're phone. Don't factory reset whatever you do. Can you not mount as USB is recovery and get the data that way.?
Click to expand...
Click to collapse
Sorry, I just checked again, cwm is this, so JB 6.0.2.9:
http://cmw.cmfs.me/c1/recovery/GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar
Regarding Android stock version, I'm not sure if it's 4.0.4 or 4.1.
I can access the nand backup easily, it is on the external SD - is it possible to get the address book out of the nand directly?
Thanks so much...
I'd concentrate on getting the phone up and running first as once you have a working phone, the options for recovering ur data get that much easier......example....I believe you can use titanium backup to retrieve data from nandroids.......
And as @andrewwright says.....stay away from 4.0.4
This might be my S2, or it might be my W...but it's definitely CM
Got it. What I did was
0) Make a complete cwm nandroid backup.
1) Restore only the /data partition of my old cwm nandroid backup using cwm, then stay in cwm recovery and copy my old contacts database to my computer:
Code:
adb pull /data/data/com.android.providers.contacts/databases/contacts2.db
2) Use the dump-contacts2db script from the awesome project at https://github.com/stachre/dump-contacts2db to dump a vcf file from contacts2.db.
3) Restore the cwm nandroid backup made in 0).
4) Copy the vcf file to my phone and import it in contacts.
I found awesome advice here: http://android.stackexchange.com/questions/7851/restore-only-part-of-nandroid-image
and here: http://www.droidwiki.de/Datenwiederherstellung#Kontakte
Nice work and great feed back. Add solved to thread title. :thumbup:
Sent from my GT-I9300 using xda app-developers app
Related
My current CWM is giving me errors mounting /system and /data, and I can't restore my nandroid backup.
Anyway to do it using another CWM (link, please), or any way at all? So far, everything I've read says another CWM version won't work (well, that and there aren't many choices on our device).
EDIT: Fixed it by doing a clean install and using Titanium Backup to restore from my nandroid backup.
GermainZ said:
My current CWM is giving me errors mounting /system and /data, and I can't restore my nandroid backup.
Anyway to do it using another CWM (link, please), or any way at all? So far, everything I've read says another CWM version won't work (well, that and there aren't many choices on our device).
Click to expand...
Click to collapse
Your /system, /data and /cache are in rfs or ext4?
I just used ODIN to go back to the stock ROM, so that might have changed something.
Currently:
Code:
/dev/stl9 [b][u]/system rfs[/b][/u] ro,relatime,vfat,log_off,check=no,gid/uid/rwx,iocharset=cp437 0 0
/dev/stl11 [b][u]/data rfs[/b][/u] rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=cp437 0 0
Cache seems nonexistent.
EDIT: Just so I'm not misunderstood. I still want to restore my nandroid backup. I only flashed stock from ODIN so I could use my phone.
GermainZ said:
I just used ODIN to go back to the stock ROM, so that might have changed something.
Currently:
Code:
/dev/stl9 [b][u]/system rfs[/b][/u] ro,relatime,vfat,log_off,check=no,gid/uid/rwx,iocharset=cp437 0 0
/dev/stl11 [b][u]/data rfs[/b][/u] rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=cp437 0 0
Cache seems nonexistent.
EDIT: Just so I'm not misunderstood. I still want to restore my nandroid backup. I only flashed stock from ODIN so I could use my phone.
Click to expand...
Click to collapse
Hmm . . . but when you create a backup which recovery you used? RZR, CWM 5.0.2.8 or CWM 5.0.2.6 temp?
Alucard1989pl said:
Hmm . . . but when you create a backup which recovery you used? RZR, CWM 5.0.2.8 or CWM 5.0.2.6 temp?
Click to expand...
Click to collapse
I feel kind of stupid not looking at the nandroid backup now that I just did.
When I did the backup, my system/cache/data were in ext4 format.
Also, I did it using rafael's permanent CWM, so I think that would be 5.0.2.8.
Fixed the issue by flashing Rafael's latest kernel (E3 version) then using temp CWM to restore.
Didn't really fix anything as I think I soft bricked my phone again.
EDIT: Fixed it by doing a clean install and using Titanium Backup to restore from my nandroid backup.
U can use cwm 5.0.4 that type of version which is still there in android development section.that is good.
Sent from my Galaxy Ace i using xda premium
GermainZ said:
Fixed the issue by flashing Rafael's latest kernel (E3 version) then using temp CWM to restore.
Didn't really fix anything as I think I soft bricked my phone again.
EDIT: Fixed it by doing a clean install and using Titanium Backup to restore from my nandroid backup.
Click to expand...
Click to collapse
That's a boot partition error
Flash firmware through Odin and don't forget to tick re-partition
Sometimes just flashing Boot loader file fixes everything
Edit:
Sorry
Didn't saw you fixed it
GermainZ said:
My current CWM is giving me errors mounting /system and /data, and I can't restore my nandroid backup.
Anyway to do it using another CWM (link, please), or any way at all? So far, everything I've read says another CWM version won't work (well, that and there aren't many choices on our device).
EDIT: Fixed it by doing a clean install and using Titanium Backup to restore from my nandroid backup.
Click to expand...
Click to collapse
I had the same problem...when i flashed the latest kernel with permanent CWM. I did the same. Did a clean install then flashed the e3 kernel. I guess clean install requires a new stock kernel to be flashed over it...to solve the issue
.
Sent from something which calls itself an Ace with an I.
Problems restoring a nandroid backup
Hi,
I hope it's ok to post my troubles just right here. Sorry for any inconvenience.
my phone is a XT910 with Android 2.3.6 my phone is rooted and I needed to go back to factory settings.
I have never experimented with any other roms. the stock rom (factory settings) work ok.
Now I try to restore a backup I made with "online-nandroid". Rom manager says CWM 3+ is used for my phone.
When I try to get int recovery mode, the screen stops with a driangle with an exclamation mark in it.
the only way to move on is to press vol up and vol down. That's how I get to a menu.
unfortunately I can't choose one of the two options:
- Android system recovery <3e>
and
- Android system recovery utility
a yellow
qe1/1
appears
as well.
I stuck - please help.
da.cappo said:
Hi,
I hope it's ok to post my troubles just right here. Sorry for any inconvenience.
my phone is a XT910 with Android 2.3.6 my phone is rooted and I needed to go back to factory settings.
I have never experimented with any other roms. the stock rom (factory settings) work ok.
Now I try to restore a backup I made with "online-nandroid". Rom manager says CWM 3+ is used for my phone.
When I try to get int recovery mode, the screen stops with a driangle with an exclamation mark in it.
the only way to move on is to press vol up and vol down. That's how I get to a menu.
unfortunately I can't choose one of the two options:
- Android system recovery <3e>
and
- Android system recovery utility
a yellow
qe1/1
appears
as well.
I stuck - please help.
Click to expand...
Click to collapse
Wrong section
If you are mounting error, is a corrupted partition.
Flash a ROM with Bootloader File (BOOT_... or DefaultCalBootWithData), select pit and repartition
10 hours after i tried using the swapper 2...my galaxy s3 GT-I9300 rebooted suddenly and got stuck in the galaxy s3 logo. I was rooted and had sotmax v14 running on it. I flashed it several times with that ROM and also cm 10.1 from the sd card. Then i flashed it with a stock ROM using odin. I had access to download mode and recovery mode. In the stock recovery mode it showed something like "E:/eror mounting efs((invalid arguement)).
I have very little knowledge about flashing and i do not even know what EFS is and thus i dont remember of taking a backup of that efs. I flashed it with CF root to access CWM recovery. Now in CWM recovery when i chose sd car it says
"E:cant mount sd card" and when i tried to mount efs it displayed "error mounting efs".
I have been trying hard for 2 days with little food. Any help would be highly appreciated. Help me. What should i do now?? Iam stuck on the galaxy s3 logo no matter what i do...i tried everything factory reset wipe data cache etc etc. please help!!!!
please help i have the same problem when i try to restore my efs folder
i have access to download mode and costum recovery but the phone is all time in bootloop in the logo of samsung galaxy s3 gt i9300
just restore the efs backup you've made. if you didn't, try restoring any nandroid backups, maybe they have efs included. if that doesn't work, try looking in the sdcard for some files that have "efs" in the name, some kernels back it up automatically. use adb to view the files (Google it). if that doesn't work, try flashing a stock rom and factory resetting from recovery.
and that is absolutely everything you can do.
Glebun said:
just restore the efs backup you've made. if you didn't, try restoring any nandroid backups, maybe they have efs included. if that doesn't work, try looking in the sdcard for some files that have "efs" in the name, some kernels back it up automatically. use adb to view the files (Google it). if that doesn't work, try flashing a stock rom and factory resetting from recovery.
and that is absolutely everything you can do.
Click to expand...
Click to collapse
thanks for your help my problem is solved by flashing a stock rom 4.0.4 with odin but i have cheked the phone bootloader update option
good, make sure to hit "thanks"
Glebun said:
just restore the efs backup you've made. if you didn't, try restoring any nandroid backups, maybe they have efs included. if that doesn't work, try looking in the sdcard for some files that have "efs" in the name, some kernels back it up automatically. use adb to view the files (Google it). if that doesn't work, try flashing a stock rom and factory resetting from recovery.
and that is absolutely everything you can do.
Click to expand...
Click to collapse
The main problem is I am not able to access the sdcard as it says sdcard cannot be mounted. I remember to have made backups with ROM manager but i dont have access to it. I had ICS 4.04 running on it when i purchased the phone. I tried flashing the phone with two compatible ROMs from Sammobile.com which are jellybean ROMs and factory resetting it, but that did not help too. Are those the stock ROM for the galaxy S3 or should I flash it with ICS 4.04??? Please help me. Thanks in advance!!!!
vijay005100 said:
The main problem is I am not able to access the sdcard as it says sdcard cannot be mounted. I remember to have made backups with ROM manager but i dont have access to it. I had ICS 4.04 running on it when i purchased the phone. I tried flashing the phone with two compatible ROMs from Sammobile.com which are jellybean ROMs and factory resetting it, but that did not help too. Are those the stock ROM for the galaxy S3 or should I flash it with ICS 4.04??? Please help me. Thanks in advance!!!!
Click to expand...
Click to collapse
Were you able to fix the problem?
Please help !!
Quote:
Originally Posted by Glebun View Post
just restore the efs backup you've made. if you didn't, try restoring any nandroid backups, maybe they have efs included. if that doesn't work, try looking in the sdcard for some files that have "efs" in the name, some kernels back it up automatically. use adb to view the files (Google it). if that doesn't work, try flashing a stock rom and factory resetting from recovery.
and that is absolutely everything you can do.
---------
thanks for your help my problem is solved by flashing a stock rom 4.0.4 with odin but i have cheked the phone bootloader update option
---------
:crying::crying:
I have got the exact same problem with my S3 GT-I9300, phone bootloop, error mounting efs after flashing omega rom aokp. Can you please explain in detail
which stock rom 4.0.4 you used ?
which odin version you used because I am finding that it is greyed out on every flashing of rom that I did ?
any other detail you think I should know coz I am quite new to this flashing stuff.
Thanks
Thanks you !!!
YESS i tried flashing the stock rom i was previously on cm10.2(andriod 4.3) now im stuck in a bootloop do i have to flash the gapps also?please urgent please reply
gmat11 said:
YESS i tried flashing the stock rom i was previously on cm10.2(andriod 4.3) now im stuck in a bootloop do i have to flash the gapps also?please urgent please reply
Click to expand...
Click to collapse
Try reading the stickies in general forum, follow the instructions on how to return to stock.
Hi Everyone,
Every time I restore a sammy JB install from recovery it always hangs on the bootscreen and never boots up. I was wondering if anyone has had this issue before or its something that I'm doing wrong
When restoring I always run an odin flash using mobile odin and root it with philz. I then delete all the system folders, wipe cache etc and restore.
If i used a different kernel to backup the install i will install that kernel before restoring.
I've tried several roms such as neatrom, Alliance and Wanam but get the same result. CM/AOSP roms restore ok.
If anyone has any suggestions it would be much appreciated.
Many thanks
Question since you state you using philz kernel why dont you use his CWM to backup and restore your backups instead of Odin mobile.
iT comes as part of the kernel http://forum.xda-developers.com/showthread.php?t=1877270
Nyssa1104 said:
Question since you state you using philz kernel why dont you use his CWM to backup and restore your backups instead of Odin mobile.
iT comes as part of the kernel http://forum.xda-developers.com/showthread.php?t=1877270
Click to expand...
Click to collapse
Thanks for your reply.
I only use mobile odin to flash official firmware so its a fresh start before installing a rom.
I've tried to restore from philz before but had the same problem. Normally use Dorimanx.
I myself had no probles with Mobile odin pro of CWM in Philz kernals and since Philz kernal this tends to be the normal backup or flashing aid for me. Since I have a Micro SD card install back up and roms are place on this..
by the way Im using SuperSUPro and not Superuser for root.
symondo12 said:
Hi Everyone,
Every time I restore a sammy JB install from recovery it always hangs on the bootscreen and never boots up. I was wondering if anyone has had this issue before or its something that I'm doing wrong
When restoring I always run an odin flash using mobile odin and root it with philz. I then delete all the system folders, wipe cache etc and restore.
If i used a different kernel to backup the install i will install that kernel before restoring.
I've tried several roms such as neatrom, Alliance and Wanam but get the same result. CM/AOSP roms restore ok.
If anyone has any suggestions it would be much appreciated.
Many thanks
Click to expand...
Click to collapse
I have a possible solution just flash entire original rom(the one you are going to restore) once, then restore your nandroid backup, clear cache/dalvik, reboot. I have a hunch on the problem that it might be caused by another roms /preload partition data (our nandroid backup won't usually backup it by default so it actually never gets wiped or overwritten)
Edit :I forgot to mention a factory reset at the beginning.
Sent from my GT-I9100 using xda app-developers app
Hi guys. I wanted to go back from cm10.1 to stock 4.1.2 and did a nandroid backup with cwm 6.0.2.7 touch and saved my data also with titanium backup.
After flashing stock JB I couldnt find the titanium backups anymore which I realized are stored on internal card so after wiping everything my data is gone. Ja I know my fault. But then I thought I can just restore the nandroid backup I just made to have everything how it was before, but after doing it my screen stopped at the samsung galaxy s3 screen and didnt boot anymore.
Of course I made the backup with 6.0.2.7 and restored it with th same version, but I dont get why its not booting correctly :S
After that I thought I just root the stock phone and flash cm10.1 and try to restore again but it also didnt help.
thax in advance
galaxy s3 gt I9300
clown85 said:
Hi guys. I wanted to go back from cm10.1 to stock 4.1.2 and did a nandroid backup with cwm 6.0.2.7 touch and saved my data also with titanium backup.
After flashing stock JB I couldnt find the titanium backups anymore which I realized are stored on internal card so after wiping everything my data is gone. Ja I know my fault. But then I thought I can just restore the nandroid backup I just made to have everything how it was before, but after doing it my screen stopped at the samsung galaxy s3 screen and didnt boot anymore.
Of course I made the backup with 6.0.2.7 and restored it with th same version, but I dont get why its not booting correctly :S
After that I thought I just root the stock phone and flash cm10.1 and try to restore again but it also didnt help.
thax in advance
galaxy s3 gt I9300
Click to expand...
Click to collapse
try philz recovery.
sriram231092 said:
try philz recovery.
Click to expand...
Click to collapse
It says in all the steps E:failed archive external sd
is it a problem to rstore from external sd card? so shall I just try to put it on internal?
Worth trying if you have no backup of it .
jje
Just to make it sure. I root my s3 installing stock jb, then I flash cwm with odin and install su.zip from sd card. always get root access. is it a problem for cwm to flash it first before having root access to the phone???
clown85 said:
Just to make it sure. I root my s3 installing stock jb, then I flash cwm with odin and install su.zip from sd card. always get root access. is it a problem for cwm to flash it first before having root access to the phone???
Click to expand...
Click to collapse
CWM doesn't work without root access. Have you tried to install a complete new stock ROM from Sammobile.com? Even though this doesn't recover your data, your phone might work again.
Endiej said:
CWM doesn't work without root access. Have you tried to install a complete new stock ROM from Sammobile.com? Even though this doesn't recover your data, your phone might work again.
Click to expand...
Click to collapse
My phone works just fine. The problem is to flash the cm10.1 nandroid backup successful to get my internal sd memory back.
btw I tried to copy the backup to internal sd but then it says md5 sum mismatch god damn it..... I just wanna have my internal sd card files back. grrrrrrrr
If you have Phil's recovery use the aroma file manager to find and move the back up so it can be seen as I'm guessing you are suffering the sd/0/0 etc problem
slaphead20 said:
If you have Phil's recovery use the aroma file manager to find and move the back up so it can be seen as I'm guessing you are suffering the sd/0/0 etc problem
Click to expand...
Click to collapse
I guess Im just ****ed... I tried moving it with aroma and then it says error again. its just possible for me to restore the nandroid with cwm which I originally had and just from external sd and even then the logfile says everything is fine just restoring system is an error. that sucks cuz I cant boot the phone then to get access to my internal space via usb
or is there another possibility to restore internal card to get access????
Have you changed recovery versions between creating the backup and trying to restore it?
slaphead20 said:
Have you changed recovery versions between creating the backup and trying to restore it?
Click to expand...
Click to collapse
of course not.
its just weird that I can restore everything exept for this cm10.1 backup. I made already a stock jb backup and I could easily restore this one :S but it doesnt help me anymore.....
Endiej said:
CWM doesn't work without root access
Click to expand...
Click to collapse
Yes it does. Recovery and root are completely unrelated. Read the root guides.
Step 1 - flash recovery via odin
Step 2 - flash su zip via recovery
CWM can flash zips, backup and restore without root access to android. Root access is within android only
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
Yes it does. Recovery and root are completely unrelated. Read the root guides.
Step 1 - flash recovery via odin
Step 2 - flash su zip via recovery
CWM can flash zips, backup and restore without root access to android. Root access is within android only
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Okay thats what I was thinking before hand... I got another idea. can I flash a working ROM like 10.1 and then go to cwm advanced recovery and restore data instead of the whole nandoid system???
clown85 said:
Okay thats what I was thinking before hand... I got another idea. can I flash a working ROM like 10.1 and then go to cwm advanced recovery and restore data instead of the whole nandoid system???
Click to expand...
Click to collapse
You can try.
Sent from my GT-I9300 using Tapatalk 2
I have the feeling that my cwm 6.0.2.7 version creates corrupt backups al the time. I just set my phone up with cm10.1 and immediately did a backup on it. I tried to restore it and while restoring it says
Erasing boot before restore...
restoring boot image...
restoring system...
restoring data...
.android_secure.img not found skipping restore of /sdcard..............
restore complete funny funny
please tell me that there is a way to rescue this
clown85 said:
I have the feeling that my cwm 6.0.2.7 version creates corrupt backups al the time. I just set my phone up with cm10.1 and immediately did a backup on it. I tried to restore it and while restoring it says
Erasing boot before restore...
restoring boot image...
restoring system...
restoring data...
.android_secure.img not found skipping restore of /sdcard..............
restore complete funny funny
please tell me that there is a way to rescue this
Click to expand...
Click to collapse
What's up? Does it not boot? Everything you posted above looks normal so can't advise.
I would recommend updating to latest anyway as 6.0.2.7 hasnt got SDS fix.
rootSU said:
What's up? Does it not boot? Everything you posted above looks normal so can't advise.
I would recommend updating to latest anyway as 6.0.2.7 hasnt got SDS fix.
Click to expand...
Click to collapse
No it doesnt boot if I try ro restore the backup I end up seeing Samsung Galaxy S3 screen and thats it....
I just updated to cwm 6.0.3.2 and made a backup and it also showed the above problem but this one restores and boots correctly :S
Another idea is. When I made the first backup with 6.0.2.7 I was also running on yank555 1.6c kernel. Is that important to set up the restore with a running system and this exact kernel? Please tell me what to do if so.
clown85 said:
I just updated to cwm 6.0.3.2 and made a backup and it also showed the above problem but this one restores and boots correctly :S
Click to expand...
Click to collapse
What is "The above problem"? If it restores and boots, its fine.
clown85 said:
Another idea is. When I made the first backup with 6.0.2.7 I was also running on yank555 1.6c kernel. Is that important to set up the restore with a running system and this exact kernel? Please tell me what to do if so.
Click to expand...
Click to collapse
Nandroid backup takes
boot.img (kernel)
system.img (ROM)
userdata.img (Your stuff)
Its okay. Somehow I got the data restored with advanced restoring which didnt work with 6.0.2.7 but with 3.2.
close here.
thanx for your help
Hello.
I'd like to give MIUI a try, but, of course, I'd also like to switch back to my stock ROM if things go wrong or if I don't like MIUI.
How can I backup my entire phone (rooting, Recovery Mode capability and other on-power key-combination-activated features etc etc) and 100% failsafe restore it at any time?
Thanks in advance.
Rooted stock = do a nandroid (CWM) backup which is essentially an 'image' of the phone at the time you make the backup. Try MIUI; don't like it ? Restore the nandroid you took of your rooted stock setup. Sorted (You will need to ensure you backup the contents of your external SD card separately if you have one).
Be careful you don't 'overthink' this, it's really very simple both ways (backup/restore).
My Recovery Mode doesn't have a backup option
MistahBungle said:
Rooted stock = do a nandroid (CWM) backup which is essentially an 'image' of the phone at the time you make the backup. Try MIUI; don't like it ? Restore the nandroid you took of your rooted stock setup. Sorted (You will need to ensure you backup the contents of your external SD card separately if you have one).
Be careful you don't 'overthink' this, it's really very simple both ways (backup/restore).
Click to expand...
Click to collapse
Thanks for prompt response. I took a look at current Recovery Mode menu and it doesn't include a backup/restore option like in http://forum.xda-developers.com/wiki/ClockworkMod_Recovery. It shows only the above:
Code:
Android system recovery <3e>
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
test redbend fota[FS]
-----------------------------------
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC-code : ZVV
Successfully applied multi-CSC.
I've already downloaded Recovery from clockworkmod.com but didn't do anything with it yet.
Sorry if it has already been detailed in another thread, but I didn't find it and I don't know how to make such nandroid backup.
Thanks.
OBackup
I've just downloaded OBackup app from Play store and am doing my backup.
My question is: after I flash MIUI, what are the tools/steps I'll need to restore my backup?
Thank you very much.
That's the stock Android recovery.
OK...
What you need to do is not install CWM separately. That will only persist until you reboot & is designed to allow you to flash whatever rom/kernel you want which will have it's own version of CWM baked into the kernel.
That backup program you're using; no idea as I've never used it.
What I recommend you do is find a custom kernel you like (actually, any custom kernel will do given you're going to flash Miui) which will have CWM. Flash that into your stock setup, then make a nandroid (CWM) backup of your stock setup so you can go back to it if you don't like Miui/whatever else you try (If you restored this & wanted to go back completely stock/unrooted/etc, all you'd need to do is flash a stock kernel). This is what you asked for in your OP. I warned you not to start overcomplicating things, and this is exactly what you're doing.
The kernel supplied with Miui should have CWM, so if you find you don't like it, you should be able to simply restore the backup you made of your stock setup in CWRecovery.
I also very strongly recommend you learn 'the basics' as you seem to be lacking in this knowledge. Flashing stuff/etc without knowing these things leads to busted phones. Read the tutorials/guides stickied near the top of the General section; there's a wealth of information in those.
Hi!
I've a similiar problem with my GT-i9100!
Can I do a restore of my stock ROM (that have android 4.1) if I've install a costum ROM like RootBox that have a different version of android (4.2.2)?
Can my phone brick because there are a differents kernel?
Tnx you all! ^^
Rox666 said:
Hi!
I've a similiar problem with my GT-i9100!
Can I do a restore of my stock ROM (that have android 4.1) if I've install a costum ROM like RootBox that have a different version of android (4.2.2)?
Can my phone brick because there are a differents kernel?
Tnx you all! ^^
Click to expand...
Click to collapse
No it won't brick.
sadekmefti said:
No it won't brick.
Click to expand...
Click to collapse
Hi and tnx for reply!
I've try to do a restore of my sock rom from recovery but it's says to me that there is an error on md5 check sum...
I've install the RootBox ROM in my gt-i9100...but I can't come back to sock from recovery because the stock kernel dosen't work with RootBox's Kernel...
so I've to use odin to flash the stock firmware.......at the origin, my idea didn't comprised use odin because of download mode counter (so that why I did a backup!)...but now I don't have any other way...!
...what a sad story.. XD
Rox666 said:
Hi and tnx for reply!
I've try to do a restore of my sock rom from recovery but it's says to me that there is an error on md5 check sum...
I've install the RootBox ROM in my gt-i9100...but I can't come back to sock from recovery because the stock kernel dosen't work with RootBox's Kernel...
so I've to use odin to flash the stock firmware.......at the origin, my idea didn't comprised use odin because of download mode counter (so that why I did a backup!)...but now I don't have any other way...!
...what a sad story.. XD
Click to expand...
Click to collapse
You can't restore your backup because of a different MD5 SUM which means that your backup has been corrupted.
Flashing a stock ROM or Kernel via ODIN will not increase your flash counter.
Flash NeatROM Lite, this is the best ROM ever, it like stock with additional things.
Sent from GT-I9100 using Tapatalk 4
sadekmefti said:
You can't restore your backmyf a different MD5 SUM which means that your backup has been corrupted.
Flashing a stock ROM or Kernel via ODIN will not increase your flash counter.
Flash NeatROM Lite, this is the best ROM ever, it like stock with additional things.
Sent from GT-I9100 using Tapatalk 4
Click to expand...
Click to collapse
DIO *******************
I will cry...... :'( so the recovery hadn't save well my backup..I read about similar error and I hoped that was thet...
My last chance is use Odin..
Only a question: can I flash the stock rom from recovery renaming the file .tar.md5 in .zip?
Tnx for you for the counsel! I will try thet rom after solving this problem! For now I have changed rom and I'm using MIUI and it works really well!!
Rox666 said:
DIO *******************
I will cry...... :'( so the recovery hadn't save well my backup..I read about similar error and I hoped that was thet...
My last chance is use Odin..
Only a question: can I flash the stock rom from recovery renaming the file .tar.md5 in .zip?
Tnx for you for the counsel! I will try thet rom after solving this problem! For now I have changed rom and I'm using MIUI and it works really well!!
Click to expand...
Click to collapse
You can't flash a stock ROM from recovery by changing .tar.md5 to .zip .
You want to change ROM to Stock, use Mobile Odin to flash a Stock ROM or Flash NeatROM v4.8 Lite.
sadekmefti said:
You can't flash a stock ROM from recovery by changing .tar.md5 to .zip .
You want to change ROM to Stock, use Mobile Odin to flash a Stock ROM or Flash NeatROM v4.8 Lite.
Click to expand...
Click to collapse
Tnx you! I understand what I have to do! I'll try your rom today
Tnx again!!!