Hello everyone i have a qilive 97r, an auchan rebrand of archos platinum 97b. The platinum 97 was a rebrand of onda v972. What rebrand is this? And there is a custom rom for this tablet? I can't find anything.
Here's the spec
cpur: 1.6 GHz Quad-Core/RK3188
RAM: 2GB
Armazenamento: 8GB (expansível até 64 GB – cartão microSD)
screen: 9.7"multitouch 2048x1536 px – IPS technology
Sistema operativo: Android ™ 4.2.2 Jelly Bean
Camara: Frontal e Traseira de 2MegaPixeis
Ligações: Porta micro USB / Combo jack (3.5 mm) / USB 2.0 / saida mini HDMI
Material de fabrico: Alumínio
i will update this post:
is a modified rebrand of aoson m30q
the mods are camera 2mpx instead of 5 and internal storage of 8gb instead of 16
is a good tablet but the software, almost stock, sucks very bad. I mean, ram consumption, some lag with no reason and something else. I'm trying to do something with tools but i think it will need a new kernel\rom to work good. It has a very good potential
Hello, I bought the same Qilive 97r but I couldn't speed it up properly. Have you found any solution? I've looked at almost all posts about this tab and the Archos 97 platinum HD but also nothin' to do... I really hope can someone port an almost DECENT rom on this powerful device
GarbeVR said:
Hello, I bought the same Qilive 97r but I couldn't speed it up properly. Have you found any solution? I've looked at almost all posts about this tab and the Archos 97 platinum HD but also nothin' to do... I really hope can someone port an almost DECENT rom on this powerful device
Click to expand...
Click to collapse
come here man
http://forum.xda-developers.com/showthread.php?t=2310818
oma ported kitkat on this tablet, just install and do the fixes
Thanks a lot mannn [emoji41]
Hmmm okay but... I read all the posts and I can't find some Infos.
First: with those fix will the qilive be quite stable?
Second: To install OMA should I unlock bl or is already unlocked by default? (Probably a stupid question IMHO)
But most important... Should I flash via fastboot or should I use some other whitchcrafts?
I will smash the thanks button if can anybody help my "noobage" [emoji24]
GarbeVR said:
Hmmm okay but... I read all the posts and I can't find some Infos.
First: with those fix will the qilive be quite stable?
Second: To install OMA should I unlock bl or is already unlocked by default? (Probably a stupid question IMHO)
But most important... Should I flash via fastboot or should I use some other whitchcrafts?
I will smash the thanks button if can anybody help my "noobage" [emoji24]
Click to expand...
Click to collapse
hi, with the fix apparently everything work, even camera and rotation. The oma roms are provided with tools, drivers and instructions, it's easy to use it.
I recommend use windows 7 to install due to driver issues with rockchip and windows 8-8.1
Ok so should I only follow the instruction.txt file?
yes. I have annoyed oma for weeks for confirm
Ahahahah ok thanks a lot!! [emoji5]
EDIT: Which "KK" should I choose? Are both 4.4.2 and 4.4.4 quite smooth? I'm not sure about which one to choose...
Still no answ...
i'm using omni rom 4.4.4 but i always choose the last version
Thanks a lot :good::good:
Related
Hi, I recently bought the MAJESTIC / Audiola TAB-192 as a cheap alternative to a real tab :laugh: . I have trouble in finding a custom ROM for it or at least an official update to another android version (now it's 4.0.4) because it's an italian brand and there's no technical support (everything on their website is "under construction"). I really need to do something because it can get laggy and sometimes the screen flashes in a pink background ( i don't know how to explain this) and it gets annoying.
Here are the specs on the box:
4GBs of intern memory
9" Multi-touch screen
1,2 GHz Cortex A8 processor
512Mb DDR3 RAM
GPU : Mali 400 MHz
OS: Android 4.0.4 Ice Cream Sandwich
Hope that someone could help me. Thanks in advance
LE: Is there any compatible ROM that could suit my device?
anybody?!
ROM majestic TAB 192
salutgabi said:
Hi, I recently bought the MAJESTIC / Audiola TAB-192 as a cheap alternative to a real tab :laugh: . I have trouble in finding a custom ROM for it or at least an official update to another android version (now it's 4.0.4) because it's an italian brand and there's no technical support (everything on their website is "under construction"). I really need to do something because it can get laggy and sometimes the screen flashes in a pink background ( i don't know how to explain this) and it gets annoying.
Here are the specs on the box:
4GBs of intern memory
9" Multi-touch screen
1,2 GHz Cortex A8 processor
512Mb DDR3 RAM
GPU : Mali 400 MHz
OS: Android 4.0.4 Ice Cream Sandwich
Hope that someone could help me. Thanks in advance
LE: Is there any compatible ROM that could suit my device?
Click to expand...
Click to collapse
you can search for any " M901 " 4.0.4 ROM as " allwinner " or any other china product but....
you have to be sure that the ROM is made for 9 inches tablet
i will attach you a ROM that worked with me perfectly right on the same " majestic TAB192 "
stable ICS 4.0.4 ROM working perfectly fine
sorry to not respond before but i just saw the post
4shared.com
/file/ecDfkpI8/L090-1.
html?
sorry i am new i cant post full link
you have to collect it
thanks brother but you didnt wrote the method to flash the firmware into majestic tab 192
Thank you very much for your help. The problem was solved thanks to you. @shakeelajmal : You need to flash it with LiveSuit. it's easy
My friend give me this tablet to install the Play store. I don't have much experience with tablets and android in general, but I like to experiment so I flashed the tablet with the firmware posted by Future-Gate. Everything went ok, except the wifi that cannot be turned on (the switch stay "on" for a few seconds and then return to "off").
I usually search for info by myself (I revived an almost dead Galaxy S3 some months ago) but at the moment I'm panicked because the tablet is not mine and cannot find much informations.
On another thread I read that it could be a recovery problem (?) or a kernel problem. Somebody could point me on how to check/fix/workaround those problems?
Thank you.
Somebody with this tablet could please make a rom dump? I flashed it without backing up
thank you for the rom. it works well, except for the wifi. might have something to do with the drivers perhaps? i'm not very good with android.
I tried a lot of custom roms and they either worked fine and the wifi wasnt working, or the wifi was working but a lot of other things didn't work. Yours seems to be the best and smoothest, but the broken wifi makes makes the tablet useless. Please help
pls can you help me with the link to get your tab working again, I have an audiola that needs recovery
Hi All,
I have recently purchased this gorgeous looking android mini PC with camera. It is running ICS. Wondering if any one aware of a jellybean upgrade or a custom ROM made for this? Following are the specs:
1 Model No: HD2
2 CPU: ARM Cortex-A8, Boxchip/Allwinner A10
3 GPU Mail-400MP*1
4 OS Android 4.0.4
5 RAM 1GB DDR3
Thanks
Firmware?
Hi!
I have one and it only works for a week!
It really don't works very well (lags, bugs, hangs...) but now is only black screen!
Do you have any idea where to find firmnware?
A greeting!
EDIT:
The firware is in the Veidoo web, I can't test it couse mine is back to Honkong.
Enybox EU 2000 Allwinner A10
EDDIE_MUTANTE said:
Hi!
I have one and it only works for a week!
It really don't works very well (lags, bugs, hangs...) but now is only black screen!
Do you have any idea where to find firmnware?
A greeting!
EDIT:
The firware is in the Veidoo web, I can't test it couse mine is back to Honkong.
Click to expand...
Click to collapse
Hi,
i own the same one. Still have no problems with it. The only thing i was wondering about ist an preconfigured Skype Account i can not delete. I tried to reset to factory settings but it did not work. I really would like to delete this Account or better reset the model to have a clean version of android on it. I am still looking for a matching rom. Did you find one?
The firmware you can download here
enybox.com/En/news/class/
can you tell me how you reseted your device. there is a smale hole on the right side for reset but when i push it nothing happens and when i try to install the mentioned firmware it is saying no new firmware necessary.
Would be nice to get some answers.
Good luck so far
Sorry, I have recived one second HD2 and works worst that the first one at last I have my money back and buy one Rikomagic 802IIIS. There is one HD2 dual core that maybe works... to reset you have to download firmware from veidoo and follow the instructions, you will need one microSD greater than 2GB. But I think that Skype kepps the same. Hope you will have more luky that mee!
Hi,
I was wondering if anyone with a Ramos i8/i9 has experimented with other custom roms and/or are aware of any stable roms that worked well with this Intel driven device ?
Thank you !
I have bought the Ramos i8 tablet (Have not received it yet though) and I am interested in testing custom roms as well. It has similar hardware with the Ramos i9 for which there are some custom roms around already (I think) so I suppose it could be ported from there (?)
There is an androidx86 project that has already released a 4.4 KitKat android for x86 devices (netbooks etc.) Could something like that be used in Ramos i8, i9 or similar Intel processor devices somehow? I suppose the install process is the hardest part...
Here is the link to the project:
http://www.android-x86.org/releases/releasenote-4-4-rc1
FYI I already asked in their group and there is a problem with the drivers of the PowerVR GPU. They are proprietary so it is not supported by androidx86.
Since there is no forum subsection for the i9 I could not post but I have some custom stuff running on my i9. I was asking the Slatedroid community if they wanted a release (which I could work on polishing) however not if only a few people will use it and help it keep going.
http://www.slatedroid.com/topic/103929-ramos-i9-custom-rom/
seven2099 said:
Since there is no forum subsection for the i9 I could not post but I have some custom stuff running on my i9. I was asking the Slatedroid community if they wanted a release (which I could work on polishing) however not if only a few people will use it and help it keep going.
http://www.slatedroid.com/topic/103929-ramos-i9-custom-rom/
Click to expand...
Click to collapse
Hi Seven I'm quite keen on experimenting and would love to give ur concoction a try and I'm sure panpapad would too...
and what better place to share it than on XDA as it might draw other devs to help contributed.
Thanks heaps if you do share it on here...! :victory:
im very interested
Hey seven2099. I'm very interested in a custom rom. Was trying to post on the slatedroid forum but have to wait for the damn approval before I can post. So soon ill be n there with you. I was also wondering if anyone as found a custom recovery which works on the i9.
Hey guys! Sure I'd like to experiment with custom roms but I got the Ramos i8 not i9 tablet. It has very similar specs but still its a different tablet. So if anyone wants to work on i8 I can test .
Ramos i9 post-root issue
Hi guys,
Total newbie here.
Can anyone provide assistance on a root gone wrong?
Long story short: bought Ramos i9, rooted it in order to remove all the Chinese apps, and now no sound is coming through the speakers (only headphones).
Have tried rebooting, factory reset, and a second root. No luck.
Adb I used is adt-bundle-windows-x86_64-20140321. I tried Nexus 4 drivers after the second root, still nothing.
Any suggestions or help would be much appreciated!
Cheers,
P
Ramos i9 firmware-Update goes wrong
Hi, I have a problem with my Ramos i9.
I have loaded and run the latest firmware from the ramos.com.cn website. After I start the Update-Process the screen goes black and the device will not boot again. I think I install the wrong firmware for a Ramos i9 with GPS. Can somebody help me to reinstall the firmware by using a Windows-PC. Thanks!
Firmware Ramos i9
Hi seven2099;
Can you help me? I have a problem with my Ramos i9.
I have loaded and run the latest firmware from the ramos.com.cn website. After I start the Update-Process the screen goes black and the device will not boot again. I think I install the wrong firmware for a Ramos i9 with GPS.
I can connect the ramos to my PC but I have no idea to reinstall the firmware by using a Windows-PC.
Thanks! HolgerE
Hi Seven2099,
This tab is rebranded and sold as digiflip xt901 in India. Please share some of your ideas on firmware mods for this.
Thanks
Suren
Hi everybody I have Ramos i8 branded as polypad i8 in Turkey.
I research whether there is another ramos i8 that is branded diffrently in an another country.
I have found one in india.
called Digiflip Pro XT 801 Tablet and with sim card Digiflip Pro XT811 Tablet.
XT 801 and XT 811 are the same configuration except 3G.
There are some who achieved to update XT811 to kitkat(4.4) but what about XT801(i8) ?
Here is link:
http://forum.xda-developers.com/general/general/kitkat-firmware-update-procedure-t2984011?nocache=1
Is it worth to try? What do you think.
Edit:
Not working becuse has different Rom.
Not try.
---
No you cant......the firmware of xt801 is different from xt811......this may brick your device
-----------------------------------------------------------------------
XT801 AND XT811 ARE BELOW:
http://www.flipkart.com/digiflip-pr...+801&ref=3611d2f4-3535-4134-874c-c65858747453
http://www.flipkart.com/digiflip-pr...&otracker=__compare_Digiflip_Pro_XT811_Tablet
interested
+1 for ramos i9 custom rom
+1
panpapad said:
There is an androidx86 project that has already released a 4.4 KitKat android for x86 devices (netbooks etc.) Could something like that be used in Ramos i8, i9 or similar Intel processor devices somehow? I suppose the install process is the hardest part...
Here is the link to the project:
http://www.android-x86.org/releases/releasenote-4-4-rc1
Click to expand...
Click to collapse
The Dell Venue 3830 tablet (8 and 7 inch-3730) is to my knowledge the only z2580 based android tablet that has an official kitkat release.
Since there are so many different z2580 devices out there without updates newer than 4.2.2 it would be a great project for many people (including me) to see if that Dell rom can be ported and optimized for other z2580 devices.
My major issue is ram on my 1GB z2580 tablet (only ~200mb free after clean reboot). A kitkat update would in many ways solve that issue and make the tablet a solid useable device. (No my kernel does not support swap.) The cpu is quite fast and a shame to waste.
Edit: Asus Zenfone 5 and 6 are both Intel z2580 devices with official kitkat updates, (and cyanogenmod seems to be supported, surprisingly). Their roms could be useful for the z2580 community. Possibly moreso than the Dell Venue since reports show the kitkat firmware to have some stability issues for some people.
/s
Good news.
When i ask ramos firm, they said that they will issue new rom as soon as intel issue a rom apropriote for x86.
They blamed intel for not issuing new rom app to x86.
For more ram you should use greenify. It makes the ram free up to 460 mb.
And not to mention nova launcher with dcikonz theme.
iordanoFF said:
Hi guys,
Total newbie here.
Can anyone provide assistance on a root gone wrong?
Long story short: bought Ramos i9, rooted it in order to remove all the Chinese apps, and now no sound is coming through the speakers (only headphones).
Have tried rebooting, factory reset, and a second root. No luck.
Adb I used is adt-bundle-windows-x86_64-20140321. I tried Nexus 4 drivers after the second root, still nothing.
Any suggestions or help would be much appreciated!
Cheers,
P
Click to expand...
Click to collapse
I had the same problem before after flashing the firmware that was provided by the rebranded manufactor Condor Ctab890Ri
no sound from speakers just headphones works
To resolve this problem i flash it with firmware of freetab 9000 ips icg
and here it is :
freetab.eu/softy/ENG/Tablets/FreeTAB_9000_IPS_ICG/Firmware/Android_4.2.2/PZPN/Firmware_9000_PZPN_android_4.2.2.rar
BYe
HolgerE said:
Hi seven2099;
Can you help me? I have a problem with my Ramos i9.
I have loaded and run the latest firmware from the ramos.com.cn website. After I start the Update-Process the screen goes black and the device will not boot again. I think I install the wrong firmware for a Ramos i9 with GPS.
I can connect the ramos to my PC but I have no idea to reinstall the firmware by using a Windows-PC.
Thanks! HolgerE
Click to expand...
Click to collapse
Mayb your device is ramos i9 3g not the normal one if 3g i can help u root it or provide u the official firmware
Hello everyone,
I'm new here
So there is this new tablet I bought : it's a 10.1" IPS ( 1280x800) capacitif with an RK3188 (1.6 GHz) chip, 1 GB of RAM and 16Gb Memory.
It came with a preinstalled 4.2 Android version.
I was just wondering if there is a chance I could upgrade it to 4.4.2 via an official firmware or a ROM.
Thanks in advance.
PS : (I'm new the ROM world).
PS 2 : The name of the tablet is ACCENT Nomade 3G
UP
INJAZ ....? same problem here dude !
anas_nih said:
INJAZ ....? same problem here dude !
Click to expand...
Click to collapse
Same here. I can't find ROMs anywhere for it.
any root for this tablet ?
http://forum.xda-developers.com/showthread.php?t=2310818
Be sure to use the correct kernel for your device. The kernel archive is on the first page.
Myself and others aren't able to get Wi-Fi or Bluetooth working right now, but perhaps you'll be more lucky.
Rom for Accent Nomade10
Please, help me to repair my tablet Accent Nomade10. it's been six weeks what is down. I was unable to find a compatible rom a flasher.
Thank you in advance.
Q&A for RK2918 Tab Odys-Loox rocks with CyanogenMod 10 / 10.1!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Alcatel T10 Upgrade
tinko975 said:
finally, i did my alcatel t10 working right..
flashed it with Oma_Odys_Loox_JB_CM10_4.1.2_v1.2, used Oma_CM10_intSD_to_NAND_OTG_fix and Oma_CM10_v1.2_Format_NAND with JK-CM10-Pascal2-oc1104_20121203 kernel. no bugs, no rotations and cpu oc 1.1 ghz..
tnx, but we want cm11..
Click to expand...
Click to collapse
Hi!
I saw your post regarding your alcatel t10 being upgraded to jellybean..
can you please guide me on how to do it and what are the items that i need to install..
Thanks!
i forgot it, sorry.. now is stock rom on that device..
Hi Oma,
Can you please help me determine what are the things that I need to download in order for me to upgrade my Alcatel T10.
I've been reading threads about upgrading its firmware to Jellybean but it came to a point that I got confused and really don't know what are the stuffs that I need in order to upgrade my tab to jellybean.
I am new to this kind of stuff and I will appreciate if you can also provide me the step by step guide on how to upgrade may to tab to jellybean..
Thanks in advance!
If you never did this there are very big possibility that will btick device.. I tried several roms but return to stock debloated and rooted.
Problems with generic RK2918 ICS tablet
Hi all!!
I'm new to this forum (and pretty much to Android scene in general), so please, be lenient with me in case I unadvertedly infringe any forum norm. The matter is, I've been looking for some info about a generic RK2918 tablet I bought about 2 years ago, to no avail. As of late, the device is acting strangely (random reboots and/or stuttering running apps that it managed effortlessly a couple months ago...). I'd like to know how to flash it, as well as which rom I should install in order to make my tablet reach its maximum potential. I've heard great things about Oma's CM 10.1 AOSP roms, but I don't know which one would suit my device best.
My device's specs go as follows:
The tablet is a IMD "|97D", a 9.7" inch, 4:3 aspect ratio screen running under Android ICS 4.03
RK 2918 CPU at 1.2 GHz
1 GB DDR3 memory
16 GB NandFlash
max 32GB microSD support
WIFI 802.11 b/g/n support
G-Sensor
dual micro USB, one of them OTG
10 point capacitive screen with IPS 1024 * 768 resolution
2MP front and back cameras
The device is currenly running under its default firmware (i.e. no root access). Any help and/or piece of advice on how to proceed would be extremely welcome. Thanks in advance!!
Sir Oma,
I flashed this rom to my Alcatel One Touch T10, CrewRKTablets_RK29_AOSP_4.2.2_r1_v1.3_20130714 with stock kernel 308 Alcatel T10 and
applied CrewRKTablets_AOSP_4.2.2_Format_NAND_fix. It is pretty stable however the battery status monitoring is not working. I have also
tried the other kernels said to be compatible with T10 notably the Pascal2 kernels. They seemed to work Ok but the screen display was
off-center, display was leaning to the right side of the screen. Same result when using the other stock kernel 308 Alcatel T10_2.
My only concern is the battery status monitoring, it remains stationary all through the whole hours of tablet use. Charging detection
is also not working. The rom however can detect the current battery status only when rebooting. I did try to apply the akku fixes for
JB and CM10, (though not intended for the AOSP rom) none worked. It ended up in bootloops.
Can you suggest a battery fix intended for CrewRKTablets_RK29_AOSP_4.2.2_r1_v1.3_20130714 rom? Of all the JB 4.2.2 offering found
at CrewRKTablets site, this rom proved to be useful and stable to my Alcatel One Touch T10 tablet. There are some minor function
issues like display resize "fit to standard screen" option, it does not work. Camera image is upside down. But I guess to a standard
user (like me) these function should not pose a serious problem as installing and running apps intended for JB 4.2.2 works smoothly.
Thank You and More Power!
@ tinko75, tried the BQ-pascal kernels too but to no good.
Hello,
I´ve got the neo X7 and because my sis and i want to use it and i have heard that you can choose between two accounts at this ROM i want to installt it.
I have the s4mini with CyanogenMod 12 but about that i´m clear but with the Neo X7 i have no Idea how that works... so can anyone explain me how to install it (maybe a step for step Instruction)
The Tablet is in a originally condition (there is no CWM or anything else. So i need all...
Thanks in advance
and I´m sry for my bad Englisch but i´m from Germany and just at school.
greetings by Kainze
Arnova 10b g3
Hi,
i've installed the CM10.1 v1.21 rom on my arnova 10b g3.
I've some batterye issue... i've tested the akku fix but informations are only updated after reboot but not in real time...
I haven't installed other fix... Do i need some specefic fix for my arnova?
Regards,
OtolizZ
---------- Post added at 11:38 AM ---------- Previous post was at 11:13 AM ----------
Hi,
i've installed the CM10.1 v1.21 rom on my arnova 10b g3.
I've some batterye issue... i've tested the akku fix but informations are only updated after reboot but not in real time...
i've also some issues with the TouchScreen... it seems to be not well calibrated, i've to touch the screen just under the spot i want to...
I haven't installed other fix... Do i need some specefic fix for my arnova?
Regards,
OtolizZ
Bricked Pmp5097
After flashing my PMP5097 cm10 I got bricked device. At startup tablet defined as "unknow device", but the screen is black
Help, please
Sorry for my english