Charger plug "seal" is broken...how do I replace? - Sony Xperia Z Ultra

hello all,
I'll keep it short and sweet--
The little black seal inside the charger plug, that plugs into the phone is broken..now the plug will not properly close and the phone is no longer waterproof. how do I go about replaced that one seal?
Thanks a lot!
http://i3.sinaimg.cn/IT/cr/2013/0712/3303698089.jpg
(I know that image is NOT of the charger or even of a z ultra..but I am just trying to give reference to the black plug I am talking about)
Thanks a lot!

Hi you got the water seals around the connector, so the phone still water proof. If the cover is broken replace it by a new one
Sent from my X506-3G using xda app-developers app

grosmouton said:
Hi you got the water seals around the connector, so the phone still water proof. If the cover is broken replace it by a new one
Sent from my X506-3G using xda app-developers app
Click to expand...
Click to collapse
Hmm okay..thanks.
Where can I go to buy the connected then? Also, how would I install the connector? It is installed inside the phone...

If the connector is broken you need to open the phone for replacing
Sent from my X506-3G using xda app-developers app

grosmouton said:
If the connector is broken you need to open the phone for replacing
Sent from my X506-3G using xda app-developers app
Click to expand...
Click to collapse
Well, the connector isn't physically broken...just the seal inside the connector. What must I do then?
Also, where would I buy phone pieces for the z ultra?

http://forum.xda-developers.com/showthread.php?t=2556705

Related

Micro USB scratches

Does anyone else notice that the stock micro USB cable pins (the 2 pins that hold the plug in place) stick out too much and will scratch the battery cover leaving 2 obvious dents overtime?
Don't know what you mean. I don't see any pins. Took.the back cover off as well. All looks ok.
Sent from my GT-I9300 using xda premium
Give it a month. Those pins will dissapear inside the connector. Happens with all microusb plugs real quick.
Sent from my LG-P920 using xda premium
I have the same problem. Generic microusb does not fit.
Edit: Had problems whith my elcheapo Chinese from ebay. Bought another elcheapo cable in Sweden and it works perfect.
Sent from my GT-I9300 using XDA

Touch scr

Hi, my touchscreen is useless when my charger or headphones is plugged in on my S X S. It thinks I'm touching everywhere on the bottom of the screen. When nothing is connected then it's 100% fine. Anyone else having these problems?
Sent from my LT26i using xda app-developers app
sindrefs said:
Hi, my touchscreen is useless when my charger or headphones is plugged in on my S X S. It thinks I'm touching everywhere on the bottom of the screen. When nothing is connected then it's 100% fine. Anyone else having these problems?
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
I had this on my arc if I connected it to my laptop. Never did figure it out.
Sent from my XperiaS via transwarp conduit.
sindrefs said:
Hi, my touchscreen is useless when my charger or headphones is plugged in on my S X S. It thinks I'm touching everywhere on the bottom of the screen. When nothing is connected then it's 100% fine. Anyone else having these problems?
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Your charger and/or cable are not original - am I right?
Stenlius said:
Your charger and/or cable are not original - am I right?
Click to expand...
Click to collapse
I kind of thought that was the issue. My arc was not on a standard lead.
My XperiaS is on standard cable and does not have this problem.
Sent from my XperiaS via transwarp conduit.
I just had this problem today when connected to an Audio Technica headphone. Maybe there are some short circuit happened that caused this problem?
Sent from my iPad using Tapatalk HD
No, you are not right. Original charger and headphones
Sent from my LT26i using xda app-developers app
sindrefs said:
No, you are not right. Original charger and headphones
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Defective cable perhaps. Just tried my XperiaS cable in my arc and it appears fine.
Sent from my XperiaS via transwarp conduit.
Can't be, cables are new
sindrefs said:
Can't be, cables are new
Click to expand...
Click to collapse
New doesn't mean they aren't defective.
It means it has a flaw made in production, not that they are old or worn.
I have this same problem. No matter what I plug in. It can be charger, aux cable, headphones. All the same effect. It long presses stuff at the bottom. Meaning the 3 capacitive buttons, 4 app shortcuts on launcher and usually the space bar. It's truly annoying
shmoejoe said:
New doesn't mean they aren't defective.
It means it has a flaw made in production, not that they are old or worn.
Click to expand...
Click to collapse
Can't be that ALL of my cables; new ones, original ones, old originals, old non originals are broken!
@kekkle; then we are two <3
Sent from my LT26i using xda app-developers app
sindrefs said:
Can't be that ALL of my cables; new ones, original ones, old originals, old non originals are broken!
@kekkle; then we are two <3
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Maybe if you used any accessory other than sony could bricked your phone.
Sent from my LT26i using Tapatalk 2
Not likely
Sent from my LT26i using xda app-developers app
*shrugs*
well since it seems only a few people are experiencing it, I don't think it's a normal issue with the device...
I switch between Sony/BB/Whatever I have laying around for cables all the time and have never experienced this issue (along with various headphone cables: Sennheiser, Sony). It sounds like a device fault :/.
Have you by chance posted something on the Sony forums about it?
sindrefs said:
Hi, my touchscreen is useless when my charger or headphones is plugged in on my S X S.
Click to expand...
Click to collapse
This issue is normal when the charger is plugged in, but I've never heard it in conjunction with headphones.
It is because of very low parasitic currents which occur if you connect your device with the mains (= charge it).
If the transformer is of high quality, those currents are near zero and of course it's also a cable issue. Small manufacturing tolerances can cause high impacts on that.
Seems people are having this problem with multiple Xperia devices and with this app:
https://play.google.com/store/apps/details?id=org.metalev.multitouch.visualizer2
You can clearly notice the problem. Multitouch itself hardly works when plugged in, doesn't even register 2 fingers. But when unplugged it recognizes 7 fingers!
I FOUND THE POSSIBLE CAUSE AND SOLUTION FOR IT!!
In my case I removed the shatterproof sheet that is preinstalled because I stupidly scratched it. I failed at putting on 2 (two!) screenprotectors. So I decided to call it off and use it without a protector.
When testing with the Multi-touch app, you clearly see a difference in behavior when connected to the charger, headphones or any other device.
First I tried with a small piece of cloth between my screen and finger and saw great improvement. I had some old Nintendo DS screen protectors lying around and tested with those too on my screen. And surprise surprise. All problems were gone.
So my tip to all for this is:
Try a screenprotector on first as it might fix your problem!
DAMN! Why did I remove mine??
Edit: I'm getting the exact same result
Sendt from my Xperia S using the XDA app
I am also experiencing this issue..and this is annoying. VERY VERY ANNOYING!
I play games on my phone like all the time and damn i cnt do it with the charger connected!
Its a deal breaker for me

HDMI Video Transmission?

I assume it is the same as an MHL connector. My questions are 1) Does it also charge your phone so it doesn't die if you're trying to watch a movie on an HDTV and 2) For the following product linked below, what is that small connector for that's next to the part that plugs into the back of your TV? I see that the other end of it plugs into your phone but can't figure out what the 3rd connector is for.
http://www.focalprice.com/MA0034W/H...A_US_MA0034W&gclid=CLP26c2NsbECFeUaQgodU1UAvA
1. Yes it will charge
2. Its for the power supply
Sent from my GT-I9300 using xda app-developers app
popoylagmay said:
2. Its for the power supply
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hmm so you would plug the charger into that one?
Wot ever you do don't buy one of them cables you've put a link to.I already brought the exact same of eBay.and trust me they don't work with Samsung galaxy s3.the only ones the work are genuine Samsung.because the genuine had 19 pins in cable and the one has like 16 or some thing like that.but trust me don't buy it
Sent from my GT-I9300 using xda app-developers app
aquariex24 said:
Hmm so you would plug the charger into that one?
Click to expand...
Click to collapse
indeed
candyman993 said:
Wot ever you do don't buy one of them cables you've put a link to.I already brought the exact same of eBay.and trust me they don't work with Samsung galaxy s3.the only ones the work are genuine Samsung.because the genuine had 19 pins in cable and the one has like 16 or some thing like that.but trust me don't buy it
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Even the one used for galaxy note doesnt work on sgs3 and when you buy one it should have this code.*(EPL-3FHUBEGSTD). Yeah ebay is scary
Sent from my GT-I9300 using xda app-developers app
-Reserved-

Wireless charging S3

Hey so i bought a back cover on ebay....
http://cgi.ebay.com/ws/eBayISAPI.dll...:eek:U:US:3160
and i got it today, I place it on a HP touchpad stand but it doesn't charge, is there something i'm missing like a setting or something? or do i have a defective back?
The item said it has been removed ...
Sent from my S3 using Tapatalk2
polska2180o said:
Hey so i bought a back cover on ebay....
http://cgi.ebay.com/ws/eBayISAPI.dll...:eek:U:US:3160
and i got it today, I place it on a HP touchpad stand but it doesn't charge, is there something i'm missing like a setting or something? or do i have a defective back?
Click to expand...
Click to collapse
not sure, but have you tried it on the palm touchstone rather than the touchpad touchstone?
also... are you using a case? if so, you might have a case that's too thick
Sent from my GT-I9300 using xda app-developers app
http://www.ebay.com/itm/Blue-Wireless-Charger-Charge-Battery-Door-Cover-Samsung-Galaxy-i9300-S3-New-/350622158060?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D13832%26meid%3D4132117564669415434%26pid%3D100015%26prg%3D1085%26rk%3D1%26sd%3D350622158060%26
Here is another link...i have not tried it on a stone as i don't have one and they are the same thing/
the touchpad touchstone charges slightly differently than the palm and potentially it might not make the receiver not want to initiate the connection.
also, are you using a case? if so, is it thicker than 4mm?
Sent from my GT-I9300 using xda app-developers app
mputtr said:
the touchpad touchstone charges slightly differently than the palm and potentially it might not make the receiver not want to initiate the connection.
also, are you using a case? if so, is it thicker than 4mm?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
ummm took case of to test but no luck. I hear what you are saying about the chargers but obviously this is designed to be independent of the brand but follow the same standard which all those chargers do along with the energizers etc of the world.
actually... between the three known inductive charging standards, they're not really compatible at all. Powermat claims to be providing qi support in the future but none of them currently work on the other's product.
Sent from my GT-I9300 using xda app-developers app

DNA No Sound from load speaker already replace charge flex still no sound

Need help.
Replaced Charger port flex cable and speaker still have no sound.
What could be causing this issue.
I lareadt hard resey and installed latest RUU still nothing
It's possible that one of the connections is lose or may have ripped. Check that all the cables are firmly secure and in place.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Jaggar345 said:
It's possible that one of the connections is lose or may have ripped. Check that all the cables are firmly secure and in place.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks for replay already check socket with maginify glass all joints and pins look fine.
It's either the other flex cable or mainboard issue... I should be receiving another parts phone in a few days and will better at narrowing down the problem.

Categories

Resources