Hi all,
I have search of various thread on custom rom for android 4.2.2 & I am not asking anyone to build a custom ROM for this tablet but I just want to ask some recommendations.
I have a Korea Tablet (not Samsung) but MPGIO QM101 which I got online from the website www.mpgio.com
QM101 tablet is similar to SANEI / AMPE tablet
the specs for my tablet is
A7 Quad core31
DDR3 2G with built in 16G ROM..
[email protected] which is a 8CORE CPU
Type: Tablet PC
Screen Size: 10"
Processor Manufacture: AllWinner
Processor Type: Coretex A7
Touch Screen Type: Capacitive Screen
Display resolution: 1280x800
Battery Life: 7000mH
Feature: Wifi,Webcams,Multi Touch,HDMI,G Sensor,Camera
Operating System: Android 4.1.1
Brand Name: MPGIO
Model Number: QM101
I have previously upgraded from 4.1.1 to 4.2.2 official rom from their websites but I just need Bluetooth dongle to work through.
anyone can recommend any custom rom which can put the Bluetooth dongle to work on this tablet?
current system : Android 4.2.2
Kernel is 3.3 (not 3.2)
SDK 3.2
Website to ROM build : http://www.mpgio.com/solution/?c=5/34&p=2&uid=252
Someone please reply!
Thank you
n_w_asg
Thank you
anyone?
Related
Hi, being my first post, I apologize if I describe my problem in omit some important information.
I recently purchased a tablet of Inno-Hit, precisely the model 0707A Golem. Description of the tablet:
IHA-C0707A
Operating System ANDROID 4.0
Processor: Allwinner A13 - Cortex A8 -1.2 GHz
Display 7 "16:9 800 x 480 pixels, Capacitive Touch Screen
Front Camera 0.3 Mpixel
Wi-Fi IEEE 802.11 b / g
Support external 3G sticks (not supplied) via OTG
Internal Memory 512 MB DDR +4 GB ROM
HW version softwinners
Kernel version 3.0.8 + YISHION @ YISHION # 202
Now I would like to know from you how to create a custom rom, but did not find anywhere a rom modified for that tablet.
It is start with the basics. Can anyone help me?
I have to start from the recovery. how do I create a modified?
TooL8790 said:
Hi, being my first post, I apologize if I describe my problem in omit some important information.
I recently purchased a tablet of Inno-Hit, precisely the model 0707A Golem. Description of the tablet:
IHA-C0707A
Operating System ANDROID 4.0
Processor: Allwinner A13 - Cortex A8 -1.2 GHz
Display 7 "16:9 800 x 480 pixels, Capacitive Touch Screen
Front Camera 0.3 Mpixel
Wi-Fi IEEE 802.11 b / g
Support external 3G sticks (not supplied) via OTG
Internal Memory 512 MB DDR +4 GB ROM
HW version softwinners
Kernel version 3.0.8 + YISHION @ YISHION # 202
Now I would like to know from you how to create a custom rom, but did not find anywhere a rom modified for that tablet.
It is start with the basics. Can anyone help me?
I have to start from the recovery. how do I create a modified?
Click to expand...
Click to collapse
may be you can start with this http://forum.xda-developers.com/showthread.php?t=2281656
and do search in xda there are a lot of guides for building a rom
Hi, friends ...
I have a tablet brand Orange Cool Thing, which configuration is as follows:
Processor Rockchip RK2928 Cortex A9, 4GB ROM, 512MB DDR3, Android 4.1.1.
That occurs for models with the same configuration, but with Cortex A8, the manufacturer provides a Jellybean 4.2.2.
Therefore, I would like to make available a custom ROM based on Jellybean 4.2.2 or higher, which can support my humble equipment.
Details of the printed circuit board:
M707-RK2928-V04-0228
EM2928-758A
7.780.1106
VER. 03
PCB=1.0MM
Since now, thank you!
Hi I support your cause
My tab is iball slide 6309i
RK2928 Jellybean 4.1.1
1GB DDR3 RAM
Cortex A9 single core
Bluetooth
If you get the solution please inform
i have a quantum wave android tablet 10.1
model number: Q-WAVEA100MBK
O.S: ANDROID 4.2.2
processor: arm cortex A9 1.0Ghz
RAM: 1GB DDR3
yesterday after booting it up it hasn't gone after the android logo screen and shows a black screen after that.i tried finding a firmware to flash it again but i couldn't.could someone please tell me where could i find the firmware for it
Hello All!
New to Porting Roms but I'm curious to whether this would be possible.
I currently own the THL W11:
Specs:
CPU: MTK6589T Cortex A7 Quad Core 1.5GHz
GPU: PowerVR SGX 544
RAM: 2Gb
ROM: 32Gb
Display: 1920 x 1080, 441 PPI
Android Version is: 4.2.1 JOP40D
MIUI Version: 4.8.29
Kernal: 3.4.5
I have successfully flash the THL W11 MIUI 5 rom found on this Forum onto the phone.
I have installed Cygwin + Android Kitchen in preparation of Porting ROMS.
Here is my question:
I would really like to update my THL W11 to Android 4.4 KitKat as well as flash MIUI 6 onto the phone. Is this at all possible, if so how?
If it is not possible, could someone explain to me why?
Obviously don't want to brick my phone!
Any response is appreciated!
Have a nice day.
FigBird
up to 10 post hix,up for everyone
Guys, I need your help. My colorfly ct132 tablet is soft bricked and I have found some roms on baidu.com. The problem is that I cannot download those roms to see if they will work. Does anyone here knows trick or owns a baidu account to help me download these roms to revive my tablet?! Thanks in advance
UPDATE: I somehow managed to download few roms, but every single one of them is in chinese and after installing touchscreen doesnt properly work.
Device specs:
Model - Colorfly CT132 Q Tiny Quad Core 13.3 Inch Tablet
CPU - Allwinner A31 Quad Core
System - Android 4.1
RAM - 2GB
Capacity - 16GB
Screen - 13.3 Inch Capacitive touch screen
Resolution - 1280*800
Extend Card - Support TF card up to 128GB
Camera - Front 2.0Mp
Back - 2.0Mp
WIFI - Wifi IEEE 802.11 b/g/n
Bluetooth - Yes
Gravity Sensor - Yes
3G - Not Build in
And here is my question, can anybody suggest me different rom compatible with my tablet?
Seems that nobody knows the answer. Can anyone help me build rom for my tablet, I know you guys can do that ... Android 4.2.2, firmware version: 3.0_20130610, kernel: 3.3.0 [email protected] #59
I managed to install similar rom and everything works except touchscreen. Does anyone know how to find right touscreen drivers for this tablet?