[ZU_GPe][Kernel] Advanced Stock Kernel with Dual Recovery {v03}[20141019] - Sony Xperia Z Ultra

[ info ]
So here is an Advanced Stock kernel with DUAL Recoveries for the Sony Z Ultra Google Play Edition!!
[ note on ZU GPE bootloader ]
so i have done some testing on a users device and here is what i found:
there are signature verification issues if u try and flash a modified OTA zip
even after unlocking bootloader we cant flash custom recovery to internal recovery (FOTAKernel partition)
i have tried:
Code:
fastboot flash recovery recovery.img
and
Code:
fastboot flash FOTAKernel recovery.img
it flashes correctly but device still goes to standard recovery
then i tried with rooted device and directly DDed onto the FOTAKernel partition, the device never entered that recovery
so i am guessing tht Sony has blocked access to the FOTAKernel partition for flashing custom recoveries
only option remaining... use the old recovery in boot kernel system...
[ credits / special thanks ]
Koush - for the brilliant work & coding on CWM recovery
CyanogenMod and FreeXperia Team (especially jerpelea) for too many things *
Dees_Troy for TWRP
@Phil3759 for PhilZ recovery
@krabappel2548 - for the recovery ramdisks for ZU
special thanks to [b @BLOWNCO[/b] for helping out with testing and risking their devices for the sake of development!!! and NO, their devices was NOT damaged during testing
ME for creating this for u guys!
[ Requirements ]
ONLY FOR Z Ultra Google Play Edition!
Bootloader unlocked
working fastboot
STOCK GPE ROM
4.4.4 - KTU84P.S1.3061 - v03
4.4.3 - KTU84L.S1.3056 - v02
4.4.2 - KOT49H.S2.2052- v01
[ features ]
DUAL RECOVERY SUPPORT!
customized PhilZ recovery v6.58.4!
standard TWRP recovery v2.8.0.1!
standard CWM recovery v6.0.4.7! (only v01 & v02)
TIP: if u are experiencing very slow backup in CWM do this
[ WARNING ]
THIS RECOVERY IS STILL IN TESTING... MAKE SURE THAT U HAVE UR COMPLETE DATA BACKED-UP (INCLUDING INTERNAL STORAGE/SDCARD DATA)
THIS IS MENT ONLY FOR STOCK SONY 4.4.2 GPE ROM FIRMWARE or ROMS BASED ON THAT FIRMWARE...
[ known issues ]
i dont know you test out and let me know
[ how to flash this kernel ] (via fastboot)
download the kernel image
flash the kernel image using fastboot:
Code:
fastboot flash boot boot.img
reboot from fastboot
Code:
fastboot reboot
the device should now start booting
to enter recovery follow the instructions given below
[ how to enter recovery ]
when you see the GOOGLE logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key for CWM & VOLUME DOWN key for TWRP
[ donations ]
if u feel that this work has helped u OR u think that the work i put into making this is worthy of donations, then click on the following link for buying me some coffee/beer/etc
PAYPAL DONATION LINK
OR
you can buy one of my awesome apps from Play Store!
[ download links ]
PLEASE DO NOT MIRROR MY FILES
NEW:
Advance Stock Kernel with Dual Recovery v03 (FW: 4.4.4 GPE - KTU84P.S1.3061)
MD5HASH: 134e9c074c59550c02ae261c67f502f6
OLD:
Advance Stock Kernel with Dual Recovery v02 (FW: 4.4.3 GPE - KTU84L.S1.3056)
MD5HASH: feef01bfb1d843d08355a4f8a5e15bf8
Advance Stock Kernel with Dual Recovery v01 (FW: 4.4.2 GPE - KOT49H.S2.2052) { MIRROR }
MD5HASH: 8a19cbe3e65bda9b44fb8a155f5ecf39
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
enjoy!!!

props to doomlord thanks for your work on this :good::good:

this will surely help here
great work as usual

Awesome! I can't use it myself (Xperia), but it's awesome to have a new kernel for the GPe. Speaking of GPe, you should make that "only for GPe" warning a little bigger and redder. Do not underestimate the stupidity of some people.

It works on 'c6833' GPE. Thanks!

LordManhattan said:
Awesome! I can't use it myself (Xperia), but it's awesome to have a new kernel for the GPe. Speaking of GPe, you should make that "only for GPe" warning a little bigger and redder. Do not underestimate the stupidity of some people.
Click to expand...
Click to collapse
abuihsan said:
It works on 'c6833' GPE. Thanks!
Click to expand...
Click to collapse
lol...
What's so advanced with this kernel except the recovery?
Sent from my C6806_GPe using Tapatalk

@Reb0rn
The fact that it gives you proper recoveries incorporated into stock kernel... It's a naming system I have followed for some time now...
Sent from my C6902 using xda app-developers app

Can we overclock with this kernel ?
Thanks

@DooMLoRD
Could you provide OCing options to this kernel ?
With open Bootloader it was always my dream to OC + UV the stunning GPE Edition.
It would be wonderful to have this option, it would be really mad ocing the Adreno 330 while joining full X-Reality and Sony Sound enhancements.
Plzz *-*

pablodelouis said:
Can we overclock with this kernel ?
Thanks
Click to expand...
Click to collapse
No.
cCclown said:
@DooMLoRD
Could you provide OCing options to this kernel ?
With open Bootloader it was always my dream to OC + UV the stunning GPE Edition.
It would be wonderful to have this option, it would be really mad ocing the Adreno 330 while joining full X-Reality and Sony Sound enhancements.
Plzz *-*
Click to expand...
Click to collapse
No.
I dont have this device with me, I have posted this kernel as a "thank you" for the community since i used the files form this device... but i wont be developing for this device as i dont have it with me...
and yes if a new update of OS/kernel comes I will keep updating this advanced stock kernel...

^^^^^what he said

cCclown said:
@DooMLoRD
Could you provide OCing options to this kernel ?
With open Bootloader it was always my dream to OC + UV the stunning GPE Edition.
It would be wonderful to have this option, it would be really mad ocing the Adreno 330 while joining full X-Reality and Sony Sound enhancements.
Plzz *-*
Click to expand...
Click to collapse
A dualbootkernel with tweaks is being developed. So just hang tight
Sent from my C6806_GPe using Tapatalk

Reb0rn said:
A dualbootkernel with tweaks is being developed. So just hang tight
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
...cool^^

Reb0rn said:
A dualbootkernel with tweaks is being developed. So just hang tight
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
When you say dualbootkernel, true dualboot for multirom support? Or are you referring to something else. I'd love to dualboot my GPe with the GPe SW and Stock SW. I like a lot of Sony's features, specifically the camera and the DLNA support.

On C6833 with GPe ROM, It appears that when the Phil's Rcevery is used to install the ROM, I get an infinite set of reboots whilst it is seting up the ROM for the first time. However, On the dual Dual Recovery, when I use the TWRP, all seems fine. Just thought I make the developers aware. Other functions of Phil's Recovery appear to be functionig really well. Overall, i am happy with the efford and it is about time we give our XZU the treatment it deserves.

AWFRONT said:
On C6833 with GPe ROM, It appears that when the Phil's Rcevery is used to install the ROM, I get an infinite set of reboots whilst it is seting up the ROM for the first time. However, On the dual Dual Recovery, when I use the TWRP, all seems fine. Just thought I make the developers aware. Other functions of Phil's Recovery appear to be functionig really well. Overall, i am happy with the efford and it is about time we give our XZU the treatment it deserves.
Click to expand...
Click to collapse
Philz recovery is not included in this...
As recommended in the OP please use the recovery in the kernel provided to flash!
Sent from my C6902 using xda app-developers app

Going to give this a try since revolution kernel didn't flash on my GPE device. Here goes nothing.

FYI -- Cyanogenmod ROMs think that the device is a honami (Z1). Flashing CM11 in either Clockword or TWRP errors out with "this package is for c6808, c6806_gpe, togari, togari_gpe devices; this is a honami".
Was pulling my hair out for hours until I found a post by a kind soul who also saw this issue.
http://forum.cyanogenmod.com/topic/88520-z-ultra-gpe/

chefp said:
FYI -- Cyanogenmod ROMs think that the device is a honami (Z1). Flashing CM11 in either Clockword or TWRP errors out with "this package is for c6808, c6806_gpe, togari, togari_gpe devices; this is a honami".
Was pulling my hair out for hours until I found a post by a kind soul who also saw this issue.
http://forum.cyanogenmod.com/topic/88520-z-ultra-gpe/
Click to expand...
Click to collapse
Yep, known issue with some of our recoveries, only on the stock ROMs though, comes from using Z1's recovery images in the repacked boot.img.
Now that you have a ZU GPe make sure to NEVER flash a Sony FTF to it

blueether said:
Yep, known issue with some of our recoveries, only on the stock ROMs though, comes from using Z1's recovery images in the repacked boot.img.
Now that you have a ZU GPe make sure to NEVER flash a Sony FTF to it
Click to expand...
Click to collapse
Thanks for the tip! I'm a stock Android kinda guy and don't even want to touch Sorny's hacked up version

Related

[KERNEL][PLAY][GSM/CDMA] DooMKernel [Rel:v03][Dt:15/MAY][FW:ICSBeta]

-------[ UPDATE ]-------
DooMKernel v03 released! changelog posted here
-------[ UPDATE ]-------
[ intro ]
hello guys! here is the FIRST custom kernel for Official Sony ICS Beta!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
incase u need to go back to stock kernel, i suggest u try my Advanced Stock Kernel for ICS-Beta...
[ special thanks to ]
Blagus
zdzihu
aZuZu
jerpelea
Thank you guys for ur help! this would not have been possible without ur help!
[ disclaimer ]
OVERCLOCKING CAN BE DANGEROUS! U RISK THE HARDWARE GETTING DAMAGED!
PROCEED WITH CAUTION! U HAVE BEEN WARNED!
I AM NOT TO BE HELD RESPONSIBLE IF U DAMAGE UR PHONE / SPILL UR COFFEE / MISS UR ALARMS / ANY OTHER CALAMITY/MISHAP
[ WARNING ]
"Partition SDCard" option in CWM5 WILL WIPE UR SDCARD!!!
official kernel sources are not available.. We are using the kernel sources which are meant for ARC modifying, patching them to work on PLAY... So a few bugs are expected...
THERE ARE NO GRAPHICS BUGS LIKE THE PREVIOUS LEAKS/PORTS
[ features ]
same as my ARC kernel
[ credits for features ]
visit my ARC kernel thread
[ requirements ]
stock SE ICS Beta FW* (i havent tested on other ROMs so i cannot guarantee that it will work on them!)
bootloader unlocked
working fastboot
[ how to install this kernel ]
download the boot.img & modules update.zip
save the boot.img in the folder with fastboot binaries (fastboot.exe files)
save the modules update.zip to sdcard (on phone)
power down device
start device in fastboot mode
use the following command to flash the boot.img
Code:
fastboot flash boot boot.img
reboot phone and enter recovery
flash the wifi modules update.zip for my kernel
reboot phone and enjoy the kernel
[ how to enter recovery ]
entry key is the BACK button
there are multiple notifications to tell u when to press the entry key:
LED will light up to BLUE
the phone will vibrate when its waiting for keypress
thats it you should now enter my custom recovery
[ how to use/navigate in recovery ]
BACK button to GO BACK
SEARCH button to SELECT
HOME button to GO UP
MENU button to GO DOWN
OR
On-Screen Navigation Buttons
FOR OVERCLOCKING
start SetCPU/NoFrills CPU Control app on ur device (or any other app which supports overclocking) (u may get a popup asking for SuperUser permissions, click ok/yes/allow)
now slowly increase the MAX slider to the right (one notch at a time) to increase the maximum frequency limit
DO NOT JUMP TO THE LAST POSSIBLE FREQUENCY
SLOWLY increase the frequency one notch at a time and do stability/testing for few hours
[ donations ]
if u feel that this work has helped u OR u think that the work i put into making this is worthy of donations, then click on the following link for buying me some coffee/beer/etc
PAYPAL DONATION LINK
[ sources ]
https://github.com/DooMLoRD/Xperia-2011-Kernel-2.6.32.9/tree/ics
If you use any of my sources/patches kindly send me a p.m. on XDA letting me know that you are using them, also credit me in ur kernel thread/OP and link back to this thread!
[ download links ]
< NEW >
v03:
[PLAY][GSM/CDMA] DooMKernel ICS BETA v03
MD5HASH: 208ea2081585e9dc16eb39257e9a2be1
Wifi Modules for v01 kernel onwards
MD5HASH: 5e9ee519fe8a3ed2fe91d19c6a92bc3a
< OLD >
v02:
[PLAY][GSM/CDMA] DooMKernel ICS BETA v02 [2.0Ghz version only]
MD5HASH: 7b2e5139979d7cf5529a42d53bcbd8b5
[PLAY][GSM/CDMA] DooMKernel ICS BETA v02 [1.6Ghz version only] (will show up as #1002)
MD5HASH: f945b82efa5debfe1f42da0a6d4609b3
Wifi Modules for v01 kernel onwards
MD5HASH: 5e9ee519fe8a3ed2fe91d19c6a92bc3a
v01:
[PLAY][GSM/CDMA] DooMKernel ICS BETA v01 [2.0Ghz version only]
MD5HASH: 3b58a740844a02b3df8305c09cbd4683
[PLAY][GSM/CDMA] DooMKernel ICS BETA v01 [1.6Ghz version only] (will show up as #1001)
MD5HASH: 9be2b87daec194bd325f3cf0421b65c9
Wifi Modules for v01 kernel onwards
MD5HASH: 5e9ee519fe8a3ed2fe91d19c6a92bc3a
[ DooMKernel Signature banners!!! ]
If you like to use my kernels and u want to show the world that u use it/love it , then you can add this banner to you signature!!!
Just copy the following code and paste it in you USER CP under "Edit Signature":
HTML:
[URL="http://forum.xda-developers.com/showthread.php?t=1573184"][IMG]http://icxperia.com/doomlord/doomkernel-sig.png[/IMG][/URL]
[ for modders/themers/others ]
hey guys here i am attaching a template update.zip which has been tested to work on the recovery provided here... u can add ur stuff to that file and edit the updater-script so that the u can flash ur files via this recovery...
basically it contains the correct combination of update-binary & mounting syntax...
this file is NOT required for normal/general users
TEMPLATE UPDATE.ZIP (v1)
cheers!
DooM, not the first custom kernel, mine was released like two seconds before yours.
But you get the credit, with the hints
Keiran
KeiranFTW said:
DooM, not the first custom kernel, mine was released like two seconds before yours.
But you get the credit, with the hints
Keiran
Click to expand...
Click to collapse
ok... dont u use our FXP sources for ur kernel? then u are already using part of my work as base
anyways enjoy!
praise the lord!
DooMLoRD said:
ok... dont u use our FXP sources for ur kernel? then u are already using part of my work as base
anyways enjoy!
Click to expand...
Click to collapse
yes I do
You da best dog:d
was just waiting for your kernel just before I could flash ICS! =)
So I plug in my phone flash 42ftf, then the rest can all be done on flashtool right? Fastboot with flashtool?
Sent from my R800at using XDA Premium
2ghz boots & runs on R800x (did not try overclocking, tho)
paxChristos said:
2ghz boots & runs on R800x (did not try overclocking, tho)
Click to expand...
Click to collapse
wifi is not working for me.
frogot to flash wifi enable fix . working now
fma965 said:
wifi is not working for me.
Click to expand...
Click to collapse
even with the Wifi Modules ?
hitman980206 said:
So I plug in my phone flash 42ftf, then the rest can all be done on flashtool right? Fastboot with flashtool?
Sent from my R800at using XDA Premium
Click to expand...
Click to collapse
FlashTool currently only supports flashing kernel... We are working on adding capability to flash system.img and userdata.img
paxChristos said:
2ghz boots & runs on R800x (did not try overclocking, tho)
Click to expand...
Click to collapse
Great! I have started work on patching GB CDMA kernel too... Might release it in a few hours or in a day or two depending on how much time it takes...
fma965 said:
wifi is not working for me.
Click to expand...
Click to collapse
Did u edit build.prop to "enable" WiFi?
WiFi working fine here... Check screenshot... Is anyone else facing same issue?
Sent from my LT18i using XDA
DooMLoRD said:
FlashTool currently only supports flashing kernel... We are working on adding capability to flash system.img and userdata.img
Sent from my LT18i using XDA
Click to expand...
Click to collapse
Thanks you saved me a great deal of headache. I'll have to figure out the rest :beer:
Sent from my R800at using XDA Premium
yh forgot to flash wifi enable fix / build.prop edit
working now
Wifi and OC working great here, ICS is perfect now. Thanks Doomlord!
hitman980206 said:
Thanks you saved me a great deal of headache. I'll have to figure out the rest :beer:
Sent from my R800at using XDA Premium
Click to expand...
Click to collapse
If you van flash a kernel with Fastboot, you can flash the other two things.
I have a couple of questions, first relating to the Kernel, I flashed the wifi fix and the Wifi still doesn't turn on for me, how can I edit the build.prop to enable it?
second is, does this Official Beta rom not have Google apps pre-installed? Also I don't have Android Market or the Play Shop
Thanks for your help
Yourmama said:
I have a couple of questions, first relating to the Kernel, I flashed the wifi fix and the Wifi still doesn't turn on for me, how can I edit the build.prop to enable it?
second is, does this Official Beta rom not have Google apps pre-installed? Also I don't have Android Market or the Play Shop
Thanks for your help
Click to expand...
Click to collapse
All ur questions are already answered on the official release thread...
Sent from my LT18i using XDA
Nice work DooMLoRD
Can you add the wifi line to the default.prop in the RAMDisk, so people don't have to edit the build.prop themselves?
Nice job with this! Everything working here except superuser, just seems to crash. Any ideas on what the problem might be and how I can fix it?

[ROM][All Bootloader][B.1.54]Xperiance Lite v1.0 [27/12]

After the huge success of my rom Xperiance Lite in the Xperia U Section as well as quite a few requests for bringing it to GO, I decided to let Xperia GO users also enjoy the party Hope you guys like it I dont have the phone myself so if you encounter any bugs, please mention in detail along with F/w
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Overview​
This rom combines the style of the Xperia UI while removing the bloat that Sony shovels along with it to provide an experience unmatched! Only the best of Xperia features have survived in my purge of Sony's firmware This rom is to be installed on STOCK Sony F/w Only ! (ie, 6.1.1.B.1.10 or 6.1.1.B.1.54) Depending on the base firmware, you might encounter bugs as such and not directly related to the rom (Yes, Im referring mostly to the broken tethering in B.1.54 )
Click to expand...
Click to collapse
Features
Bloatware removed
Pre-rooted
Build.prop tweaks
init.d Support Added
Custom Font Added
Custom Boot Animation & Charging Animation by Chukubdu
CWM Touch Recovery by Atis112
Fast GPS Lock
Governors by AndyX
Gmail 4.2
Theming By Chukubdu
Thunderbolt Script by Pikachu01
Xperia GX Launcher by serajr​
Click to expand...
Click to collapse
Mods will work fine but due to the large no. of tweaks I added, some Performance scripts might clash with them, reducing performance or even causing system instability.. So I suggest asking me first if a script might clash before installing it
Installation Instructions
Stock ICS Rom (With no Rooted edits/Mods) : Flash zip via CWM ( Factory Reset.etc is automatically taken care of ) then Wipe Cache
Stock ICS Rom With Mods or Custom Rom : Flash Stock FTF, and then flash with CWM and wipe Cache
For Devices running a custom Kernel, Please flash CustomKernelSupport.zip via CWM before booting! Note: This zip file only makes sure there is no clashes,etc and doesnt allow running a Custom Kernel On a Bootloader-Locked Device Also, Install the Kernel & the stock FTF first, before you flash the ROM & CustomKernelSupport else you might lose Root access.Im looking into a fix for this now, but till then, I believe you can just reroot it with Bin4ry method ( or alternatively, reinstall again in the order I just gave)
Addons Package
The Addons Package contains the following mods which I recommend you do install. However, I want this ROM to be fast and simple,while allowing customization options for the end-user. For this reason, I have included these mods as an Additional zip which is an optional Install.
Just flash via CWM and Reboot! You can flash directly after installing the rom or later after booting it up
AC!D Audio Engine by Team AC!D
Cybershot Experience 4.7 by Rizal Lovins
InfiniteView Mod by reaper61616
Jellybean 4.2 Keyboard
Xperia T Statusbar by destroyy
Click to expand...
Click to collapse
This Rom is made so awesome by the Mods by the Following Developers ! So A Big Thanks To them !
AlenKing - X-Clean ROM
AnDyX - Governors
Atis112 - CWM Recovery
Chukudu - Alot of GFX & Theming
destroyy for Xperia T Statusbar
Pikachu01 - Thunderbolt Script
reaper61616 for InfiniteView Mod
Rizal Lovins For Cybershot Experience 4.7
serajr - Xperia GX Launcher
Team AC!D For AC!D Audio Engine ​
Click to expand...
Click to collapse
Also a Huge Thanks To Chukudu for making me the Boot & Charging Animations and the Signatures And Also to ILoveXperia for helping me test my beta version
Be Sure to Restart Phone On First Boot !!!
Download :
Xperiance Lite v1.0
Addons Package v1.0
Custom Kernel Support
Cosmic Flow Style BootAnimation for Xperiance Lite by M4ST3R-V Coming soon
Have a heart ! Support my Dev work with a hit of Thanks button Its free and it gives me a sense of happines knowing people like my work
Click to expand...
Click to collapse
Coming to an Xperia Near You !!
:good::good: If you like my ROM, please Hit the Thanks Button also Comments and PMs regarding ROM performance and suggestions are welcome And if you like any mod especially, make sure to thank the Original Developer as well :good::good:
Screenshots
Screenshots are from same rom on an Xperia U. If someone could upload a few new screens,would be nice
Charging Animation :
Note: Attached below are Static Images but the Actual ones are Animated
Default Boot Animation by Chukubdu :
Bonus Boot Animation By M4ST3R-V
Changelog :
v1.0 ( 27/12/2012 )
First Release
Hints For Better Performance/Battery
There isnt much to post here since I already included most of them in the rom itself But here goes!
1) Go to Settings>Development Options and Change Animation and Transition Speed to 0.5x
2) Download NoFrills CPU Control and change Governor to Lulzactiveq and Scheduler to SIO. Tick the 'Set On Boot' Option
Thanks for releasing a new ROM for xgo! I'll try it tomorrow after my work.
Thank you, I would be happy to try you rom but its to complicated for me to move all the way from Munjeni custom Rom with his v14 Custom Kernel+memory_tweaks (excellent platform ). You asked by default to installed it on STOCK Sony F/w Only.
xperia_88 said:
Thank you, I would be happy to try you rom but its to complicated for me to move all the way from Munjeni custom Rom with his v14 Custom Kernel+memory_tweaks (excellent platform ). You asked by default to installed it on STOCK Sony F/w Only.
Click to expand...
Click to collapse
Sorry about that mate I thought it's alot easier to just flash this after stock than making everyone download the entire Rom (200+ mb each time ) Ill do that in future for people with other roms though Thanks for the advice
so, we flash stock rom, then we install cwm recovery(munjenis kernel) and then we install your rom?
cool. btw does it have any battery tweaks?
Yup That pretty much sums it up Yeah enough to improve battery by noticeable amounts Plus Custom Governors.. I suggest you switch to lulzactiveq with SIO immediately
Min3r said:
Yup That pretty much sums it up Yeah enough to improve battery by noticeable amounts Plus Custom Governors.. I suggest you switch to lulzactiveq with SIO immediately
Click to expand...
Click to collapse
Why do you suggest that? What does it do?
Sent from my ST27i using xda app-developers app
I think AnDyX's thread explains it far better than I could Just check out the links in his first post about What Governors are and how they affect Performance.etc
Simple explanation though : Governor and Scheduler control the speed and functioning of the Processor and I/O Cycles respectively. To control those is to control the entire processing speed and battery usage in one go You get the picture
i got stuck at the sony logo after flashing this.
You did flash CustomKernelSupport.zip didnt you ?
Min3r said:
You did flash CustomKernelSupport.zip didnt you ?
Click to expand...
Click to collapse
Yes
Sent from my ST27i using xda app-developers app
Can you retry with a Stock Kernel installed ? Then we could isolate the issue
Min3r said:
Can you retry with a Stock Kernel installed ? Then we could isolate the issue
Click to expand...
Click to collapse
Stock doesn't have cwm in it...
So I used munjenis kernel for cwm
Sent from my ST27i using xda app-developers app
There are alot of CWMs here that can be installed for Stock dude Check out atis's CWM..
its for locked bootloaders, and i have unlocked bootloader...
CWM for locked bootloader works fine on Unlocked too bro Dont worry, I wont make such a silly mistake
Min3r said:
CWM for locked bootloader works fine on Unlocked too bro Dont worry, I wont make such a silly mistake
Click to expand...
Click to collapse
Hmm ok I will try this later then
Sent from my ST27i using xda app-developers app
I just notice that there is problem in installing apk manually, through flashtool, through backup restored, min3r any idea? sorry been busy with my holiday and now only can online through phone..:silly:

[SP][ROM][4.3]{LEAK} Sony JellyBean Firmware: 12.1.A.0.256 (UnlockedBootloaders ONLY)

DooMLoRD said:
since the official 4.3 FW is now released I will be closing this thread!
cheers and enjoy the official release!
regards,
DooMLoRD
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
[ info ]
Hello friends,
so after the sneak peak, i present to you leaked Sony 4.3 JellyBean Firmware 12.1.A.0.256 for the Xperia SP (C5302/C5303)...
this firmware was ment for developer (brown) devices but i was able to get it to boot on production devices...
huge thanks to Sony devs for such a polished and fast firmware! by the looks of things official roll out is near!
hope you guys are happy that you donated the phone to me! i can work on such stuff as i have the device in hand
THIS IS FOR UNLOCKED BOOTLOADERS ONLY!
[ NOTICE ]
since this is an internal testing firmware, do not expect to see the same features on the official final release... some things could be added while others removed...
[ screenshots ]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
most screenshots are posted here ​
[ WARNING ]
PLEASE DO NOT CROSSFLASH THIS ROM+KERNEL... this is ment only for C5302/C5303 (Xperia SP)... please do not flash it on other variants....
THIS IS AN LEAKED ROM
FEW THINGS ARE EXPECTED NOT TO WORK
THIS IS POSTED JUST SO THAT USERS CAN ENJOY THE UPCOMING FEATURES AND OTHER DEVS CAN HELP IN FIXING THE ISSUES
MORE THINGS WILL FOLLOW AS AND WHEN I/OTHERS CAN GET THEM TO WORK
DO NOT ASK FOR FURTHER UPDATES/ETA OF OFFICIAL RELEASE
please backup all data, including internal SDCARD data before flashing this ROM
[ why has this been posted? ]
DooMLoRD said:
many devs can use the libs to improve existing/work-in-progress ROMs...
many themers can start porting to ROMs/devices...
many users will get a feel of whats in store for the JB update...
Click to expand...
Click to collapse
[ features ]
Easy to flash update.zip via recovery
Prerooted and busybox installed (buggy, easy fix, will be published later) [FIX]
recovery is NOT included (for now) [FIX]
new kernel with recovery available! check here AFTER flashing ROM
[ whats not working? ]
you tell me!
please report other things as and when you find them
[ requirements ]
unlocked bootloader
previously on stock .253/.254 JB ROM or roms based on that [since some components of THIS rom contain files from those firmwares]
supplied ROM
any existing kernel with recovery
[ how to install ]
download the ROM and save it on SDCARD
reboot device into recovery
flash the ROMs update.zip (this will take some time)
No need to wipe data in recovery!
thats it now reboot device
first boot will take time
power down device
enter fastboot mode
flash advanced stock kernel posted here to get working recovery & to fix root!
enjoy!
[ donations ]
if u feel that this work has helped u OR u think that the work i put into making this is worthy of donations, then click on the following link for buying me some coffee/beer/etc
PAYPAL DONATION LINK
OR
you can buy one of my awesome apps from Play Store!
[ download link ]
kindly DO NOT MIRROR MY FILES!!!
SP-4.3_leak_256-DooMLoRD.zip (MIRROR1)
MD5HASH: 3fcfadd6764ed6b74e517c1e0f2799bd { 705 MB (73,95,27,194 bytes) }
Dont forget to download the advanced stock kernel posted here! this is to be flashed AFTER flashing the ROM!
i understand that everyone is really happy about this but please dont flood this thread with "thank you" posts... there is a "Thanks" button, use that... and there is always an option to donate or buy one of my awesome apps from Play Store! :angel:
READ THE FULL THREAD BEFORE ASKING ANY QUERIES OR REPORTING ANY BUGS/ISSUES
ENJOY!!!
Advanced Stock Kernel with recovery!
so guys here is a new kernel with CWM recovery for this leaked ROM...
[ instructions for flashing kernel ]
download kernel from link given below
save kernel in folder containing fastboot
reboot device into fastboot mode
Code:
adb reboot bootloader
flash kernel to boot partition via fastboot
Code:
fastboot flash boot kernel.elf
reboot from fastboot
Code:
fastboot reboot
device should now start booting
thats it!
[ how to enter recovery ]
when you see the Sony bootlogo, the BLUE LED will light up & the device will have a short vibration
keep TAPPING the VOLUME UP key to enter CWM 6.0.4.6
[ how to fix root ]
once you have done the above instructions
download the latest SuperSU update.zip from: http://download.chainfire.eu/supersu
save it on sdcard of device
reboot into recovery
flash the supersu update.zip
reboot from recovery into OS
root should now be fixed!
[ download link ]
Advanced Stock Kernel for 4.3 leak v01
regards,
DooMLoRD
Awesome, already downloading :good:
Wow DoomLord, you are awesome! Downloading. Thanks for all!
Can i flash it on CWM Locked Bootloader, @DooMLoRD
Levered said:
Can i flash it on CWM Locked Bootloader, @DooMLoRD
Click to expand...
Click to collapse
As he mentioned,only for Unlocked Bootloaders
Levered said:
Can i flash it on CWM Locked Bootloader, @DooMLoRD
Click to expand...
Click to collapse
READ The OP guys UNLOCKED BOOTLOADER ONLY.. :good::good:
yeahhhh Doomlord you rock...
i've waited this long, and when its time to try 4.3
thanks guys :good: :fingers-crossed:
Ben Ling said:
As he mentioned,only for Unlocked Bootloaders
Click to expand...
Click to collapse
dosimple12 said:
READ The OP guys UNLOCKED BOOTLOADER ONLY.. :good::good:
Click to expand...
Click to collapse
thanks, im just want confirmation method..
Levered said:
thanks, im just want confirmation method..
Click to expand...
Click to collapse
maybe someone can prepair tft file for who has locked BL in a short time
Levered said:
thanks, im just want confirmation method..
Click to expand...
Click to collapse
when the person who has posted it after LOTS of testing, has clearly indicated that ITS ONLY FOR UNLOCKED BOOTLOADERS, that what more confirmation do you want?
krump_lee said:
maybe someone can prepair tft file for who has locked BL in a short time
Click to expand...
Click to collapse
sure give me the secret certificates/signatures and I will prepare an FTF for you
DooMLoRD said:
when the person who has posted it after LOTS of testing, has clearly indicated that ITS ONLY FOR UNLOCKED BOOTLOADERS, that what more confirmation do you want?
sure give me the secret certificates/signatures and I will prepare an FTF for you
Click to expand...
Click to collapse
i hope you will make ftf too:good:
DooMLoRD said:
\sure give me the secret certificates/signatures and I will prepare an FTF for you
Click to expand...
Click to collapse
how to get that doom??
Nice, i'm going to test it
Thanks you very much Señor DoomLord
sanzNya said:
how to get that doom??
Click to expand...
Click to collapse
Don't you understand? Only Sony can create .SIN files that then are magically converted into a .ftf
sanzNya said:
how to get that doom??
Click to expand...
Click to collapse
You can't unless you work at Sony...
Sent from my Nexus 7 using xda app-developers app
Finally Android 4.3 come for our xperia SP...
Unless the new version of Android under the Sony rule and, not to be too annoyed to Sony for all eternity!
BIG THANKS DooMLoRD...
How can I fix the SuperSU? It says the binary is not installed
wiping doubt
hi.. u said No need to wipe data in recovery!
then, should I wipe cache, system and dalvik cache, but not data?
Reboot and show sony logo again and again...
waiting-waiting to start-up...help me

[ROM][UB]Android 4.4.2 KOT49H Google Play Edition - Root/Busybox/Tweaked (1/16/14)

Stock Android 4.4.2 KOT49H for Sony Xperia Z Ultra LTE/HSPA+
-Made from full system/boot dump of Google Play Edition Z Ultra 4.4.2 KOT49H.S2.2052
-Rooted with SuperSU by Chainfire
-Busybox installed
-Odexed (for ART compatibility)
-otacerts removed to hopefully disable future OTAs
Requirements
-LTE Sony Xperia Z Ultra (C6833/C6806)
-HSPA+ Sony Xperia Z Ultra (C6802)
-Be on 4.3 firmware (.290 or .136)
-Unlocked Bootloader
Features
-Stock Android 4.4.2 w/ Google Apps
-ART capability
-Tap to Pay (Google Wallet)
-X-Reality in Display Settings
-Dual Recovery (Clockwork & TWRP) built into boot.img - Tweaked Version only
-SD Card Write Permissions enabled - Tweaked Version only
Credits
-Chainfire, for SuperSU (working on 4.4.2)
-DooMLoRD, for the initial ZIP from which this port was made
-DooMLoRD, for the stock GPe kernel w/ recoveries packed in
Changelog
-Android 4.4.2 features can be found (here)
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions
-Fastboot flash boot.img w/ recovery (use CM boot.img, or comparable)
-Reboot into recovery (holding vol down at Sony logo)
-Factory Reset
-Flash ROM (do not flash gapps packages, gapps are already included)
Quickest Way to install ROM if not on .290
bigxie said:
The best and fastest course of action, if you're unlocked, is to do the following:
1. Use flashtool to FTF to .290, uncheck wipe data & cache, check exclude system + kernel (this literally saves like 10 minutes)
2. Reboot into the bootloader and flash CM boot.img or GPe advanced recovery
3. Reboot and enter recovery by holding volume down when the LED turns purple
4. Flash the ROM, do a factory reset
5. Reboot
Click to expand...
Click to collapse
Downloads
Tweaked Edition:
MD5 (bigxie_togari_GPe_KOT49H_tweaked-signed.zip) = 6a98ea07139074c7f5cf48ddd6e63e9d
http://d-h.st/TPG - Dev-Host (Thanks, LordManhattan!)
http://goo.im/devs/bigxie/togari/bigxie_togari_GPe_KOT49H_tweaked-signed.zip - Goo.im
Stock Edition
MD5 (bigxie_togari_GPe_KOT49H_odexed-signed.zip) = 21e5ac076c947200cdb7c76b3987798a
http://goo.im/devs/bigxie/togari/bigxie_togari_GPe_KOT49H_odexed-signed.zip - Goo.im
Kernels
ChillyChan packed the stock kernel with a newer philz recovery and TWRP available here:
http://forum.xda-developers.com/showpost.php?p=49565501&postcount=337
FAQ
Q: How can I get the launcher from the Nexus 5 that has Google Now on the leftmost pane on this ROM?
A: Install the Google Now Launcher from the Play Store: https://play.google.com/store/apps/details?id=com.google.android.launcher
Q: Does Apt-X work on the GPe ROM?
A: No, it looks like Sony did not bake Apt-X support into the GPe ROM. Perhaps they will add it to a future update (much like HTC later added IR support to the One GPe)
The following issues are both addressed in the tweaked version of GPe ROM available in OP
Q: I lost my recovery, how do I get it back?
A: This ROM contains the stock GPe kernel, which does not include recovery. If you need it, you can flash DooMLoRD's GPe recovery with dual recovery found here: http://forum.xda-developers.com/showthread.php?t=2579005
Q: I can't write to my external SD card. Is this a bug?
A: No, this is the behavior Google intended. If you want to bypass it, refer to the following thread: http://forum.xda-developers.com/showthread.php?t=2574730
will aptx bluetooth still work
locked or unlocked bootlaloader?
Sent from my C6833 using XDA Premium HD app
hykhleif said:
will aptx bluetooth still work
Click to expand...
Click to collapse
I can't test this. Not sure if Sony retained it in the GPe or not.
chacho_2me said:
locked or unlocked bootlaloader?
Sent from my C6833 using XDA Premium HD app
Click to expand...
Click to collapse
Unlocked only. I've updated the OP to be more clear.
Sent from my Nexus 5 using Tapatalk
Can flash it with 6802 ?
WFT? Finaly a GPE ROM - must flash this ASAP
"Wie geil ist das denn"
Holy... Must. Flash. Now.
And just yesterday i installed Monx firmware and thought it's over.
TimeTurn said:
WFT? Finaly a GPE ROM - must flash this ASAP
"Wie geil ist das denn"
Click to expand...
Click to collapse
Flashing as we speak. Thank you thank you OP!!!
What baseband is needed?
Sent from my Xperia Z Ultra using Tapatalk
---------- Post added at 11:53 AM ---------- Previous post was at 11:50 AM ----------
Wonderful work btw
Sent from my Xperia Z Ultra using Tapatalk
Q2V said:
Can flash it with 6802 ?
Click to expand...
Click to collapse
You can try, he wrote that HSPA+ only might work as well.
OMG this rom is EPIC. This is why I bought this device. A little patience and we were rewarded. Many many many thanks to OP and all involved for this effort. Rom is clean and smooth. Many thanks on behalf of all XZU owners!
bigxie said:
Stock Android 4.4.2 KOT49H for Sony Xperia Z Ultra LTE
-Made from full system/boot dump of Google Play Edition Z Ultra 4.4.2 KOT49H.S2.2052
-Rooted with SuperSU by Chainfire
-Busybox installed
-Odexed (for ART compatibility)
.....
Features
-Stock Android 4.4.2 w/ Google Apps
-ART capability
-Tap to Pay (Google Wallet)
-X-Reality in Display Settings
....
Click to expand...
Click to collapse
Hi, can confirm that everything seems work, maybe only ART as when I switched it from Dalvic, the phone reboot but it still use Dalvic..
anyway thanks for bringing this flashable zip.
CptAwesomeTT said:
OMG this rom is EPIC. This is why I bought this device. A little patience and we were rewarded. Many many many thanks to OP and all involved for this effort. Rom is clean and smooth. Many thanks on behalf of all XZU owners!
Click to expand...
Click to collapse
Did you flash it? So, share with us some features you found.
How about antutu marks?
Speederoff said:
Did you flash it? So, share with us some features you found.
How about antutu marks?
Click to expand...
Click to collapse
Yes I flashed it. This is a stock version of Android, completely clean and default. You won't find any CM features here. Only customization is Sony's X reality toggle (see OP for screenshot). I'm not into phone benchies but i'm running Antutu now....
Edit: benchmark pics added
Dose c6833 GSM work?
Dose c6833 GSM work?
chbjftjy said:
Dose c6833 GSM work?
Click to expand...
Click to collapse
Mine is a 6833 and gsm with 3g data works perfectly. Don't have LTE so can't test that.
So no bugs whatsoever? Fully working version
Can it be true?
Which boot.img are you referring to? Are you meaning the one inside the zip file (extract and flash separately first)?
Fastboot flash boot.img w/ recovery
Click to expand...
Click to collapse
LTE and gsm works as it should BTW. .290 baseband is needed.
Sent from my C6806_GPe using Tapatalk
---------- Post added at 12:52 PM ---------- Previous post was at 12:51 PM ----------
Lol... It says 290 on op. Sorry for missing that.
Sent from my C6806_GPe using Tapatalk
Thank you for this!
Sent from my C6802 using XDA Premium 4 mobile app

[KERNEL][D6603/D6653/D6643] AndroPlusKernel v72 [DISCONTINUED]

I love DooMKernel by DooMLoRD , but he does not have Z3.
So, I started to learn and create custom kernel like DooMKernel.
Please do not ask me to add something, I don't know much about kernel and git right now...
Z3 Dual D6633 need a different kernel.
If you want me to make it, give me your Z3 Dual since I don't want to make kernel not tested on my device...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* banner by MysticEnforcer
juggly.cn and other Japanese website - please do not use this thread as a source.
I have Japanese post at androplus.org
Download from official website
Changelog
What is FOTA kernel recovery?
NOTE: this is old info
Xperia doesn't have recovery partition for user,
but we have FOTA kernel partition for OTA.
Since we have to unlock bootloader and OTA won't work on unlocked,
we can re-use useless FOTA kernel as recovery partition using Dees-Troy's "extract_elf_ramdisk".
With FOTA kernel recovery, you can update your recovery without updating kernel.
For example, TeamWin provides TWRP images of FOTA kernel for Z2:
http://teamw.in/project/twrp2/232
It's for Z2, but we can use main functions such as backup and install on Z3 and other FHD devices,
but device check by some ROM zip will give you wrong result because .prop in image has info for Z2.
Modified version of TWRP 2.8.1.0 image for D6603 is here.
You can flash images to FOTA kernel by fastboot command like
Code:
fastboot flash recovery fotakernel.img
To enter into FOTA recovery, press power key when LED is on.
How to restore DRM functions?
When you unlock bootloader you will lose X-Reality, noise reduction and so on,
but you can restore them!
Original thread is here, but I updated steps for Z3 and Z3 Compact.
1. Download zip from original thread
* Choose KitKat version (for 4.4) or Lollipop version (for 5.0)
2. Place zip in internal or external storage of your device
3. Reboot into recovery and do Factory Reset
4. Reboot into flashmode and flash FTF with Flashtool
Any FTF is OK, but of cource use FTF for same version you are using now.
Wipe: Check APPSLOG and CACHE
Exclude: Don't check
5. Close Flashtool, unplug and plug your phone and reopen Flashtool, then relock bootloader
Click BLU icon to show relock button and click it.
6. Flash FTF (same as 4.)
7. Close Flashtool, unplug and plug your phone and reopen Flashtool, then unlock bootloader
Click BLU icon to show unlock button and click it.
8. Reboot into fastboot mode and flash my kernel
9. Reboot into recovery and install DRM Restore zip
10. Reboot
11. Done!
After doing this, do not restore old data since it will revert DRM restore.
You can restore system with recovery and use Titanium Backup or something to restore app data.
Note: When you flash new ROM (not kernel), you must flash DRM Restore zip.
If you get "net::ERR_NAME_NOT_RESOLVED" when connecting xda,
please disable PrototypeProtection with Titanium Backup or something similar.
How to use F2FS?
Read this:
http://forum.xda-developers.com/xperia-s/s-development/tutorial-migrate-filesystem-to-f2fs-ext4-t3004755
Kernel sources
https://github.com/WedyDQ10/android_kernel_sony_msm8974ac
I should learn how to use git before creating custom kernel...
Credits
DooMLoRD
Faux123
Dees_Troy & TeamWin
Phil3759
Myself5
glocklee
pec0ra
and many other people involved in Z3 development
XDA:DevDB Information
AndroPlusKernel for Z3, Kernel for the Sony Xperia Z3
Contributors
AndroPlus, [#APK_cont]
Source Code: https://github.com/WedyDQ10/android_kernel_sony_msm8974ac
Kernel Special Features:
Version Information
Status: Stable
Created 2014-12-28
Last Updated 2016-04-09
Changelog
Features and changelog
Moved to here
My Kernel settings
Destroyedbeauty's settings for
performance and battery:
http://forum.xda-developers.com/showpost.php?p=62300692&postcount=1553
battery life:
http://forum.xda-developers.com/showpost.php?p=59044835&postcount=380
If I had the Xperia Z3 I would create & support my DooMKernel for it...
Sent from my D6503 using XDA Free mobile app
My suggestion would be to change the top line of your post.
Mainly due to it being a misleading piece of information.
However, great work on creating your kernel, I will be following this.
DooMLoRD said:
If I had the Xperia Z3 I would create & support my DooMKernel for it...
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
wait to get it and support this phone.
I feel you are being a little rude to @DooMLoRD.
Have a look at what this guy does for the community, he is a legend.
Sent from my Xperia Z3
I know the work that is offered DooMLoRD. I respect that.
I have another smart phone (old model) and I had support for good offer there.
I write the translation, sorry if it seemed ugly the previous message. write with good mood.
Updated to v2 - now it's almost same as DooMKernel for Z2.
It's not optimised for Z3, but good enough to have those great features
Hi,
Quick question, And apologies most likely a stupid one.
But does this require root?
Kindest Regards
yes
Issit posqible for 6653 variant of z3?
nansensical said:
Issit posqible for 6653 variant of z3?
Click to expand...
Click to collapse
+1
Same question
Does this work with v 98 in Europe?
Sent from my D6603 using XDA Free mobile app
question about color control
AndroPlus said:
[*]kernel level Color Control -v2
Click to expand...
Click to collapse
About this kernel level color control, how does it different from the default "white balance" tool provided by Sony? Is it able to control Gamma setting?
Thanks,
Claud
Great work! Does this kernel work out of the box with a rooted Z3C? And is D2W supported ? Cheers!
nansensical said:
Issit posqible for 6653 variant of z3?
Click to expand...
Click to collapse
Please test this: v3 for D6653 23.0.A.2.93
nayliz said:
Does this work with v 98 in Europe?
Sent from my D6603 using XDA Free mobile app
Click to expand...
Click to collapse
Difference between .98 and .105 is little, so it will works.
cloud402 said:
About this kernel level color control, how does it different from the default "white balance" tool provided by Sony? Is it able to control Gamma setting?
Thanks,
Claud
Click to expand...
Click to collapse
You can change color temperature with Fauxclock.
I think difference is: white balance - change value to higher, kernel level color control - change value to lower
Fruktsallad said:
Great work! Does this kernel work out of the box with a rooted Z3C? And is D2W supported ? Cheers!
Click to expand...
Click to collapse
Please test this: v3 for D5803 23.0.A.2.105 (should work even if you are on .93 or .98)
DT2W is officially supported by Sony as you know, so it works normally.
I added 2.89GHz overclocking.
v3 for D6603 23.0.A.2.105
Another question, does this kernel works with fauxsound?
nansensical said:
Another question, does this kernel works with fauxsound?
Click to expand...
Click to collapse
No, it reboots automatically when you open or installed Fauxsound...
AndroPlus said:
No, it reboots automatically when you open or installed Fauxsound...
Click to expand...
Click to collapse
Thanks man. The only reason for me to root is fauxsound. Damn...

Categories

Resources