I tried to make the internal memory swap adb method found on the forum, but the command adb devices stuck. I tried to restart and nothing, I removed the power cord and still not finished, I removed the USB cable and so died. I put the power cord back but never lit, illuminates only when connecting the USB cable, I managed to get into recovery mode, I managed to install firmware restarted and the screen remained black. the idea is that it is powered only by the USB port, which led me to do? has anyone happened to that? Thank you!
Related
Hi all... i got my V for a month and now it is not charging anymore. neither from the ac adapter nor my computer usb..and my computer couldnt detect my phone is plug to the USB port....just nothing pops out. The debugging mode status icon, and the storage icon is not shown on my phone.
basically... i tried everything i found on Google...
reboot my phone, pop out the battery, change cable[from other optimus V], changed battery, different ports on my computer, different computer, different AC adapter, different SD card, format my SD card, factory reset, and the last thing i tried is to rooted my phone and flash with a I.H.O CM7.1 ROM.
no hope at all; however, when i plugged to the usb port or the ac adapter, then i take out the battery.. the phone does power up and say required battery....
so, if anyone had this problem before and solved it.. please help me out. between, i cant return the phone anymore.. it is over a month.
forgot to mention... it is the second time this charging issue happened. the first time, it fixed itself after i plugged into the PC, windows recognized it, and installed the drivers. [well, i already installed the driver before this happened, because i was doing some coding and debugging]
this time.... windows is doing nothing, no message pop out, no new driver found.. just nothing. and my phone doesn't shows the debugging icon on the status bar even thought i ticked the debugged mode On, and connected to the usb.
sorry for my bad grammar =[
maybe see if your pc recognizes it while rebooted into recovery.
you could also try removing all the lg and Android drivers in device manager (select show hidden devices to get at them) and then plugging the phone into the pc again.
or use a Ubuntu "live cd" to check the connectability... micro$oftware is uppity, my kid's windoze computer doesn't like my v, although it used to see it fine.
I've also read that toggling debugging, disconnecting and reconnecting the cable, then toggling usb debugging again can help.
also, froyo roms are supposed to go to a charge mode when turned off but still plugged in.
Hi guys, i realy need your help, my phone is dead.
My I9100 worked fine for two years, I flashed lots of custom firmwares by Odin. Half a moth ago, when I was going to sleep, I plugged in the charger as usually, and noticed, that it started beeping occasionally. On the display it indicated smth like: Charging... than Not Charging... than Charging and so on.
I thought that I plugged the charger incorrectly and replugged it, but it didn't helped. I was very tired and just simply turned the soud off and left the phone charging. In the morning it indicated that it is charging even when the charger was unplugged.
So I've flashed the firmware - no help, than kernel from stock to fillz - no help , than siyah than again to stock - no help. All flashings were maid via CWM. I realized that flashing will not help when I turned off the phone and it was indicating that it is charging.
I decided not to do anythig. Only USB mode didn't worked because when you want to use your phone as USB you should open the apropriate mode on the phone than there will be smth like : plug the USB data cable to enter the USB data transfer mode. I couldn't do this because my phone thought that the cable is already plugged. In forums i've got hints that my micro usb should be cleaned or small board should be replaced. So i decided to clean it. I disassembled the phone and cleaned that board with micro USB. Than turned on the phone, and connected the cable. Phone recognized it and I managed to transfer files from pc to phone. From this point I can say that all terminals on micro USB are ok.
When i unplugged the cable, phone thought that it is plugged((
The most awful part:
I decided to flash it one more time and go to stock via backup made by CWM a year ago.
But during this process the phone made a reboot by itself and after that there was no loading. I can see only name of the device and thats it.
No recovery. Only download mode.
When i connect it to PC in download mode, there is a sound that USB is connected but the device is Unknown. There is no any information about this device in dev manager on PC. I tried two USB cables, all usb ports, two laptops, all versions of USB drivers for my phone.
Earlier, drivers worked well, but now i can't understand where is the problem: Is the problem still connected with my micro usb port or i just erased boot sector and it is already brick.
I gave my phone to service center, they told that they can't help me with this. They say that usb is ok, we don't know why it is not detecting by pc.
Can the board replacement help in this issue or maybe i can do smth. in linux with my device ??? I'll appreciate any suggestions.
Yesterday I talked to representatives of service center and they told me that the problem is that internal memory is damaged and they cant flash the phone.
I took the phone and tried to flash it via Heimdall with brick fix pit.
After using this pit file, the phone was flashed normally and even turned on normally.
But in the phone info menu I saw no any data about internal memory. (It was damaged and required format). I tried format through phone menu and it did nothing.
I decided to flash the phone via Odin with normal 16 GB pit file and had a bad luck. I experienced freez during repartition. After this, phone is a complete brick.
When I connect it to PC without battery pressing vol down and rower buttons it connects as unknown device but there is nothing on the phone display. No recavery no download mode. Nothing - just reflection of my frustrated face).
Currently i'm tring to make a Jtag, maybe it'll put it in the download mode, but hope is dying....
I've herad somewhere that it is possible to put it in the download mode in linux. If somone did this, could you please give me the contact of this person?
Hi all,
I am in desperate need of ya'llz help! Recently I followed the following instructions to the dot:
http://forum.xda-developers.com/showthread.php?t=2703774
in order to get root on 10.4.1.B.0.109. I ended up, like the author of the thread, in the so called bootloop. Tried everything and eventually managed to get out and restored to root 4.1.2. Thats where I am now.
The tablet works fine, however i am unable to connect to my pc with USB and also unable to charge via the charger. The tab is not detected in my computer, nor PC companion. Mass storage mode nor media mode work. I tried swapping cables, same.
The only thing I am able to get working through USB is charging when the tab is powered off, which means that the USB port is not broken.
I was thinking that updating would fix the problem, so I tried updating directly from the System update in the tab. It downloads 109, then restarts to install it, comes back with: "Could not install"!
Now my tab is not detected on my PC when its on, what to do ? How to update/Fix the USB problem!?
Any help is greatly appreciated!
Update
Ok I realized that the plugged cable only makes the red LED on the left light up, and when i click the power button, I see the battery picture in the display. Showing half charged. But the actual charge is not increasing.
Unplugging the USB, turns off the LED!
Help!
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
put your sd card in an adapter, put that in your pc and copy a zip with a full rom on it, put it back in your tablet and install the rom? Or try a different usb cable, maybe it's broken
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
hold power + Vol+ to reset device and after that try to connect to pc to flash in flashtool.
Thanx
Hi guys,
thanks for the replies. Ive tried those already. Ive tried all different types of roms. The problem is that you need a restore image such as dual recovery on the tablet. Its rooted but there is not way to install a recovery image on it, without using a computer. And since it wont connect to the PC, no way..
:/
hi. so my problem is that my phone does not turn on, i cant go to recovery or do hard reset. the phone react when i plug it in PC without battery, but its always connect and disconnect over and over again. i have downloaded the omap drivers and instaled it. now i have in the device manager a OMAP4430 FastBoot USB device. by the drivers was a fastboot emulator. but when i will flash rom, kernel or recovery a just get partition does not exist. can someone help me please? srry for english.
Does your phone not turn on at all when holding down the power button? If it boots up, and gets stuck on a loop or has an error message, that is different. But if it doesn't turn on at all, then your battery is dead or something is wrong with your phone's hardware. If you connect your phone to the PC (with the battery on), does it at least show a light? Or does it boot up at all when you hold the power button? If it doesn't show a light or boot up, it is not your battery, but your phone's hardware. Your phone might have been dropped or water inside it or it was microwaved? I know it sounds silly, but something happened to the phone physically. Now if you connect it to the PC and you see a light but it never boots, your device is bricked. Not accusing you, but you might have tried rooting it or writing over a partition on your phone which caused to brick. Also, try typing in fastboot devices. If it shows up a device, that means it is connected. Cheers!
No the phone does not turn on and it shows nothing, even when i put it on charger. If i connect to pc with battery after i installed the omap driver it just connect and disconnect over and over again, windows make this sound when you connect and disconnect something. I have flashed a new rom. It has worked but after some time its stoped. So i have try flashed it again but i could not get in recovery. A files was missing and after i try flashing thhe recovery its just dead. I can connect it just with the fastboot emulator because it's don't connect when i just put it on pc. I must connect it without battery wait 4 sec and then put the battery back. Than i can see in the emu my phone but not able flash anything because of partition does not exist
Hi,
My girlfriends tablet HTC Flyer has craked screen, and touchscreen is not working. Tried to plug in the OTG solution, but its not working at all.
Whenever I plug the usb to PC, it shows that device is not recognized. I have already installed ADB, but command ADB Devices does not give any results. So i can't go any further that way. But maybe there is other solution that you know? Tried lot of things already, and I'm slowly running out of ideas what to do. Whenever I plug the usb when in recovery mode (Power and volume down) there is text saying HBOOT USB PLUG, after couple minutes it changes to normal HBOOT.