Related
Hey there, please someone run a tcpdump while the OTA update on the mini and send me the log. Because now my phone is still sending, but maybe i'm able to work on further till the phone arrives
Thanks
Bin4ry
X10 mini PRO comes out of the store with the latest firmware 1.1.А.0.8.
and can't be udated Over-the-air :-(
But X10 mini (may be) comes with 1.0.А.1.036
Any idea how to force update Over-the-air, if firmware already latest?
May be tcpdump of update over PcCompanion can help?
yep i know, but i we can crossflash X10 mini firmware to X10 mini pro (keyboard will not work). But now i'm searching for a x10 mini user who is making a tcpdump until i get the device to do it on my own
The faster someone helps the faster you get root
Regards
EDIT:
No way to force the update :/
SE is always using ssl-sha1 crypting in their communication with fota servers. We already tryed to guess the right chat but no luck. For now we can only dump the mainpath to fota.package and then we know it for all firmwares
PC-Comp. won't help, cause i'm working on dmclient. I think i have found the key to root a few hours ago. Now we need fota and firmware dump to roll back to the rom where fota updates from
Ок.
I already found the way to revert my firmware to previous 1.0.A.1.36 firmware.
1.1.А.0.8 -> 1.0.A.1.36 = completed
But now it's UK firmware and loose my Russian Warranty
But OTA update not available im my region :'(
OTA over WLAN is always available, because it only knows firmware version.
Hmm if not it weird.
So you are now on UK firmware?
Try to go into OTA Settings -> Networks -> WLAN Only
Then search again, if you got it:
tcpdump -D
-> you will get interfaces
tcpdump -w dump.log -I *INTERFACENUMBER*
Thanks
Bin4ry
NO!
I think it looks at SIM card, operator or IMEI.
OTA update not available :-(
Yes it now UK firmware – Google Voice works perfectly (it can't works in my country).
Phone Software version:
1235-3408_1.0.A.1.36
GENERIC - user
File System Version:
WORLD-1-8_1.0.A.1.36
S1 Boot version
1229-3593 R8A026
ETS Software version
1234-7269_1S_18
Customization version
1237-0392_R6A
Memory card
1236-3496_R9A
Content version
PA12
Type Number
AAD-3880069-BV
Click to expand...
Click to collapse
Way to revert:
Use debranding procedure.
And quick copy 2 files between SEUS download firmware from SE and load it to phone.
UPD: But SEUS says now that Update available!
UPD2: OTA can't find network without SIM installed!
hmmm, okay thanks for trying. Then we have to find somebody who is willing to do and for whom OTA is available :/
But many thanks for trying
Regards
Bin4ry
How to do that
Hi, I guess I may do what you ask for. I've tried udpated the phone using OTA. It told me I already have the latest software installed, so it OTA should be available by my guess.
What is the exact way to get the dump. I have no idea where tu put the commands in. I've left Win Mobile a few days ago (after 6 years) and I'm very new to Android
Regards,
Radek
Yes, update phone using OTA is clearly possible, here is a part of the message from a member of esto forum : "I upgraded yesterday to 1.1.A.08 in India on OTA and got two fresh apps installed, Roller Coaster & Backup/Restore." can see here (last message on the page) : http://www.esato.com/board/viewtopic.php?topic=194074&start=705
If you got this message there is not OTA for you :/
Some people here claimed that there is OTA, thats because it requested someone of them to capture it with tcpdump.
Regards
Bin4ry
Darkbidule said:
Yes, update phone using OTA is clearly possible, here is a part of the message from a member of esto forum : "I upgraded yesterday to 1.1.A.08 in India on OTA and got two fresh apps installed, Roller Coaster & Backup/Restore." can see here (last message on the page) : http://www.esato.com/board/viewtopic.php?topic=194074&start=705
Click to expand...
Click to collapse
If we can get the information from the service menu from this chaps phone we can hopefully recreate the link
I created a new thread to request this informations .... Maybe this time the right users answer
Regards
Bin4ry
MarylandCookie said:
If we can get the information from the service menu from this chaps phone we can hopefully recreate the link
Click to expand...
Click to collapse
This user got update:
Phone Software Version:
1235-3408_1.1.A.0.8
GEBERIC - user
File System Version:
WORLD-1-8_1.1.A.0.8
German User!
Regards
Bin4ry
May be this will help: device booting log
<5>[ 0.000000] Linux version 2.6.29 ([email protected]) (gcc version 4.2.1)
#1 PREEMPT Sun Apr 25 11:26:30 2010
<4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
<4>[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: QCT MSM7x27 SURF
<6>[ 0.000000] Partition (from atag) system -- Offset:160 Size:670
<6>[ 0.000000] Partition (from atag) cache -- Offset:7d0 Size:190
<6>[ 0.000000] Partition (from atag) appslog -- Offset:ffe Size:2
<6>[ 0.000000] Partition (from atag) userdata -- Offset:960 Size:69e
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 55296
<7>[ 0.000000] free_area_init_node: node 0, pgdat 804de1c8, node_mem_map 805fb000
<7>[ 0.000000] Normal zone: 432 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 54864 pages, LIFO batch:15
<6>[ 0.000000] allocating 524288 bytes at 80800000 (a00000 physical) for kernel ebi1 pmem arena
<6>[ 0.000000] allocating 15159296 bytes at 80eac000 (10ac000 physical) for mdp pmem arena
<6>[ 0.000000] allocating 8880128 bytes at 81d21000 (1f21000 physical) for adsp pmem arena
<6>[ 0.000000] allocating 16777216 bytes at 82599000 (2799000 physical) for gpu1 pmem arena
<6>[ 0.000000] allocating 1048576 bytes at 83599000 (3799000 physical) for fb
<6>[ 0.000000] allocating 2097152 bytes at 83700000 (3900000 physical) for KGSL
<6>[ 0.000000] L210 cache controller enabled
<4>[ 0.000000]
<4>[ 0.000000] [KDUMP] Successfully reserved Crashk Memory
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 54864
<5>[ 0.000000] Kernel command line: mem=216M androidboot.hardware=delta
msm_hsusb.pid=0x3137 console=ttyMSM2 serialno=xxxxx console=ttyMSM0 startup=0x00000001
<3>[ 0.000000] Unknown boot option `androidboot.hardware=delta': ignoring
<6>[ 0.000000] USB serial number: xxxxx
<7>[ 0.000000] startup_reason_setup: 0x1
<4>[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
<4>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000280] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000920] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.016915] Memory: 216MB = 216MB total
<5>[ 0.016948] Memory: 168704KB available (4628K code, 1296K data, 140K init)
<6>[ 0.017291] Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)
<4>[ 0.230310] Mount-cache hash table entries: 512
<6>[ 0.230871] CPU: Testing write buffer coherency: ok
<6>[ 0.233743] net_namespace: 296 bytes
<6>[ 0.234665] NET: Registered protocol family 16
<6>[ 0.236738] socinfo_init: v3, id=43, ver=0.0, raw_id=0, raw_ver=0, hw_plat=0
<6>[ 0.236760] acpu_clock_init()
<6>[ 0.236925] L val: PLL0: 50, PLL1: 12, PLL2: 62
<6>[ 0.237055] ACPU running at 600000 KHz
<6>[ 0.237071] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
<6>[ 0.237098] 0 19200 -1 1 19200 1 30720 -1 -1 -1 1 4 3
<6>[ 0.237123] 1 120000 0 8 60000 2 61440 -1 -1 -1 5 4 3
<6>[ 0.237150] 2 122880 1 2 61440 2 61440 1 -1 -1 5 4 3
<6>[ 0.237175] 3 200000 2 6 66667 3 61440 1 2 -1 5 4 6
<6>[ 0.237200] 4 245760 1 1 122880 2 61440 1 2 3 7 -1 6
<6>[ 0.237225] 5 320000 0 3 160000 2 160000 1 2 3 7 -1 6
<6>[ 0.237250] 6 400000 2 3 133333 3 160000 5 4 3 7 -1 8
<6>[ 0.237276] 7 480000 0 2 160000 3 160000 5 4 6 -1 -1 8
<6>[ 0.237301] 8 600000 2 2 200000 3 200000 7 -1 6 -1 -1 -1
<6>[ 0.237320] Shared PLL control available.
<6>[ 0.237333] 5 scaling frequencies supported.
<7>[ 0.274038] msm_mddi_hitachi_display_device_init
<7>[ 0.274426] msm_mddi_samsung_display_device_init
<7>[ 0.274635] msm_mddi_toshiba_display_device_init
<6>[ 0.275236] console [oops-1] enabled
<4>[ 0.291785] bio: create slab <bio-0> at 0
<6>[ 0.293121] msm_i2c_probe
<6>[ 0.293233] msm_i2c_probe: clk_ctl 315, 400000 Hz
<6>[ 0.296706] Bluetooth: Core ver 2.15
<6>[ 0.297058] NET: Registered protocol family 31
<6>[ 0.297075] Bluetooth: HCI device and connection manager initialized
<6>[ 0.297096] Bluetooth: HCI socket layer initialized
<6>[ 0.299913] NET: Registered protocol family 2
<6>[ 0.300103] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<7>[ 0.300196] Switched to high resolution mode on CPU 0
<6>[ 0.300596] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.300911] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.301081] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.301100] TCP reno registered
<6>[ 0.301290] NET: Registered protocol family 1
<6>[ 0.301893] checking if image is initramfs... it is
<6>[ 0.593413] Freeing initrd memory: 684K
<6>[ 0.595695] smd probe
<6>[ 0.595718] smd_core_init()
<6>[ 0.595801] smd_core_init() done
<6>[ 0.596068] smd_alloc_channel: cid 0 fifo found; size = 8192
<6>[ 0.596091] smd_alloc_channel() 'DS' cid=0
<6>[ 0.597035] smd_alloc_channel: cid 1 fifo found; size = 8192
<6>[ 0.597060] smd_alloc_channel() 'DIAG' cid=1
<6>[ 0.597440] smd_alloc_channel: cid 2 fifo found; size = 8192
<6>[ 0.597465] smd_alloc_channel() 'RPCCALL' cid=2
<6>[ 0.597868] smd_alloc_channel: cid 7 fifo found; size = 32768
<6>[ 0.597891] smd_alloc_channel() 'DATA1' cid=7
<6>[ 0.598321] smd_alloc_channel: cid 8 fifo found; size = 8192
<6>[ 0.598343] smd_alloc_channel() 'DATA2' cid=8
<6>[ 0.598766] smd_alloc_channel: cid 9 fifo found; size = 8192
<6>[ 0.598788] smd_alloc_channel() 'DATA3' cid=9
<6>[ 0.599191] smd_alloc_channel: cid 10 fifo found; size = 8192
<6>[ 0.599215] smd_alloc_channel() 'DATA4' cid=10
<6>[ 0.599628] smd_alloc_channel: cid 11 fifo found; size = 32768
<6>[ 0.599651] smd_alloc_channel() 'DATA5' cid=11
<6>[ 0.600021] smd_alloc_channel: cid 12 fifo found; size = 32768
<6>[ 0.600045] smd_alloc_channel() 'DATA6' cid=12
<6>[ 0.600485] smd_alloc_channel: cid 13 fifo found; size = 32768
<6>[ 0.600506] smd_alloc_channel() 'DATA7' cid=13
<6>[ 0.600940] smd_alloc_channel: cid 17 fifo found; size = 8192
<6>[ 0.600963] smd_alloc_channel() 'DATA11' cid=17
<3>[ 0.601380] smd_alloc_channel: cid 38 does not exist
<6>[ 0.601401] smd_alloc_channel: cid 39 fifo found; size = 8192
<6>[ 0.601421] smd_alloc_channel() 'DAL00' cid=39
<6>[ 0.601813] smd_alloc_channel: cid 40 fifo found; size = 8192
<6>[ 0.601835] smd_alloc_channel() 'DATA5_CNTL' cid=40
<6>[ 0.602243] smd_alloc_channel: cid 41 fifo found; size = 8192
<6>[ 0.602265] smd_alloc_channel() 'DATA6_CNTL' cid=41
<6>[ 0.602646] smd_alloc_channel: cid 42 fifo found; size = 8192
<6>[ 0.602670] smd_alloc_channel() 'DATA7_CNTL' cid=42
<6>[ 0.603630] SMD Control Port Driver Initialized.
<6>[ 0.604486] SMD: ch 2 CLOSED -> OPENING
<6>[ 0.604610] SMD: ch 2 OPENING -> OPENED
<3>[ 0.605335] Using very old AMSS modem firmware.
<3>[ 0.605383] Using very old AMSS modem firmware.
<6>[ 0.605916] [adsp:adsp.c:adsp_init] rs3000000a:00010000 -- 0
<6>[ 0.609846] [msm-audio:audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.609876] [msm-audio:audpp.c:audpp_probe] Number of concurrency supported 7
<6>[ 0.609903] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.609921] [msm-audio:audpp.c:audpp_probe] queueid:13
<6>[ 0.609936] [msm-audio:audpp.c:audpp_probe] decid:0
<6>[ 0.609953] [msm-audio:audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.609970] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.609991] [msm-audio:audpp.c:audpp_probe] queueid:14
<6>[ 0.610006] [msm-audio:audpp.c:audpp_probe] decid:1
<6>[ 0.610021] [msm-audio:audpp.c:audpp_probe] nr_codec_support:5
<6>[ 0.610038] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.610055] [msm-audio:audpp.c:audpp_probe] queueid:15
<6>[ 0.610071] [msm-audio:audpp.c:audpp_probe] decid:2
<6>[ 0.610086] [msm-audio:audpp.c:audpp_probe] nr_codec_support:5
<6>[ 0.610106] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.610125] [msm-audio:audpp.c:audpp_probe] queueid:16
<6>[ 0.610140] [msm-audio:audpp.c:audpp_probe] decid:3
<6>[ 0.611198] [msm-audio:audpp.c:audpp_probe] nr_codec_support:4
<6>[ 0.611218] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.611241] [msm-audio:audpp.c:audpp_probe] queueid:17
<6>[ 0.611256] [msm-audio:audpp.c:audpp_probe] decid:4
<6>[ 0.611271] [msm-audio:audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.627273] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 0.627285] tick = 161731
<6>[ 0.627290] stamp = 18371725
<4>[ 0.627323] /home/hudsonslave/root/workspace/offbuild_param_deckard1_0_release_caf_matrix/
HUDSON_PRODUCT/robyn/HUDSON_VARIANT/user/label/
BUILDNODE/kernel/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 0.628021] proximity-sensor: proximity_probe called.
<6>[ 0.628586] Registered semc device: proximity-sensor
<6>[ 0.628605] proximity-sensor: driver installation succeeded
<6>[ 0.641741] ashmem: initialized
<6>[ 0.643300] fuse init (API version 7.11)
<4>[ 0.643923] yaffs May 12 2010 22:12:25 Installing.
<6>[ 0.643985] msgmni has been set to 331
<6>[ 0.644051] io scheduler noop registered
<6>[ 0.644066] io scheduler anticipatory registered (default)
<6>[ 0.644856] msm_fb_probe: phy_Addr = 0x3799000 virt = 0x8e200000
<6>[ 0.646640] MDP HW Base phy_Address = 0xaa200000 virt = 0x8e100000
<6>[ 0.647323] primary mddi base phy_addr = 0xaa600000 virt = 0x8e00c000
<6>[ 0.659028] MDDI: Hitachi: Found display with cell ID = 0xfd, module ID = 0x2,
revision ID = 0x20, driver ID = 0x13
<6>[ 0.662831] FrameBuffer[0] 240x320 size=307200 bytes is registered successfully!
<6>[ 0.663513] Registered led device: lcd-backlight
<6>[ 0.684138] diagfwd initializing ..
<6>[ 0.684456] SMD: ch 1 CLOSED -> OPENING
<6>[ 0.684475] diag opened SMD port; r = 0
<6>[ 0.684560] SMD: ch 1 OPENING -> OPENED
<6>[ 0.684825] diagchar initializing ..
<6>[ 0.685311] diagchar initialized
<6>[ 0.685545] [drm] Initialized drm 1.1.0 20060810
<6>[ 0.685633] msm_serial: detected port #2
<6>[ 0.685736] msm_serial.2: ttyMSM2 at MMIO 0xa9c00000 (irq = 11) is a MSM
<6>[ 0.685855] msm_serial: console setup on port #2
<6>[ 0.685880] console [ttyMSM2] enabled
<6>[ 1.533379] msm_serial: driver initialized
<6>[ 1.535949] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 1.544018] msm_serial_hs module loaded
<6>[ 1.551528] brd: module loaded
<6>[ 1.555713] loop: module loaded
<6>[ 1.556083] pmem: 1 init
<6>[ 1.557169] pmem_adsp: 0 init
<6>[ 1.559469] pmem_gpu1: 0 init
<3>[ 1.563249] pmic-lightsensor: registered.
<6>[ 1.566681] SEMC_Systemconnector: Successfully initialized.
<6>[ 1.573843] Registered semc device: vibrator
<6>[ 1.575488] msm_pmic_vibrator version 0.1 loaded
<6>[ 1.580086] semc_power: Loading...
<6>[ 1.583503] bq24180: Setting up HW
<6>[ 1.586909] bq24180: Probing
<6>[ 1.589724] bq24180: Starting watchdog reset
<6>[ 1.594721] bq24180: BQ24180 not initialized by boot SW
<6>[ 1.599184] bq24180: Stopping watchdog reset
<6>[ 1.603738] bq24180: Found HW BQ24180 revision 0x01.
<6>[ 1.609509] bq24180: Set init values
<6>[ 1.611966] bq24180: Setting charger voltage to 0 mV
<6>[ 1.616998] bq24180: Setting charger current to 0 mA
<6>[ 1.621856] bq24180: Disable charger
<6>[ 1.625506] bq24180: Set safety timer to 0 minutes
<6>[ 1.630826] semc_pwr_pltf: Setting up platform
<3>[ 1.635348] power_supply battery: driver failed to report `status' property
<3>[ 1.642773] bq24180: Charger Ready
<6>[ 1.655369] PPP generic driver version 2.4.2
<6>[ 1.655963] PPP Deflate Compression module registered
<6>[ 1.659039] PPP BSD Compression module registered
<6>[ 1.663778] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256)
(6 bit encapsulation enabled).
<6>[ 1.673376] CSLIP: code copyright 1989 Regents of the University of California.
<6>[ 1.681729] rmnet0 (): not using net_device_ops yet
<6>[ 1.686136] rmnet1 (): not using net_device_ops yet
<6>[ 1.691033] rmnet2 (): not using net_device_ops yet
<6>[ 1.695803] Linux video capture interface: v2.00
<7>[ 1.813333] msm_camdrv: <<<<<<<<<< Camera vendor [0] >>>>>>>>>>>
<7>[ 1.813353] msm_camdrv: <<<<<<<<<< Camera revision[12307] >>>>>>>>>>>
<3>[ 1.930343] bq24180: Charger Ready
<6>[ 2.272261] msm_nand: phys addr 0xa0a00000 dmac 0x7
<6>[ 2.272399] allocated dma buffer at ffa1d000, dma_addr ccaf000
<6>[ 2.277611] status: e00020
<6>[ 2.280014] nandid: 5510bc20 maker 20 device bc
<6>[ 2.284563] ONFI probe : Found an ONFI compliant device NANDCBR4N9BZBC5
<6>[ 2.291658] Found a supported NAND device
<6>[ 2.295636] NAND Id : 0x5510bc20
<6>[ 2.298936] Buswidth : 16 Bits
<6>[ 2.302074] Density : 512 MByte
<6>[ 2.305273] Pagesize : 2048 Bytes
<6>[ 2.308571] Erasesize: 131072 Bytes
<6>[ 2.312053] Oobsize : 64 Bytes
<6>[ 2.315168] 2nd_bbm : 0
<6>[ 2.317686] CFG0 Init : 0xa85408c0
<6>[ 2.321254] CFG1 Init : 0x0004745e
<6>[ 2.324803] ECCBUFCFG : 0x00000203
<5>[ 2.328374] Creating 4 MTD partitions on "msm_nand":
<5>[ 2.333329] 0x000002c00000-0x00000fa00000 : "system"
<5>[ 2.339611] 0x00000fa00000-0x000012c00000 : "cache"
<5>[ 2.344109] 0x00001ffc0000-0x000020000000 : "appslog"
<5>[ 2.349089] 0x000012c00000-0x00001ffc0000 : "userdata"
<6>[ 2.354544] msm_hsusb_rpc_connect: rpc connect success vers = 10001
<3>[ 2.359533] msm_chg_rpc_connect: connect compatible failed
<6>[ 2.365201] usb_set_composition: composition set to product id = 3137
<6>[ 2.371554] phy info257)
<6>[ 2.374684] usb_probe() io=8e01a000, irq=47, dma=ffa1e000(cca4000)
<6>[ 2.380594] Created the sysfs entry successfully
<6>[ 2.385101] Created the functions sysfs entry successfully
<6>[ 2.391774] usb_function_register: name = 'adb', map = 1
<6>[ 2.396276] usb_function_register: name = 'mass_storage', map = 4
<6>[ 2.402186] usb_set_composition: composition set to product id = 3137
<3>[ 2.409271] msm_hsusb_is_serial_num_null: rpc call success
<3>[ 2.414694] msm_hsusb_send_serial_number: rpc call failed! error: -22
<3>[ 2.421243] msm_hsusb_send_productID: rpc call success
<6>[ 2.425584] msm_hsusb: functions bound. starting.
<6>[ 2.430314] usb_bind_func() (mass_storage)
<3>[ 2.434568] usb_start: pm_app_rpc connect failed
<6>[ 2.439526] usb_function_register: name = 'diag', map = 0
<6>[ 2.444514] msm_hsusb_phy_reset
<6>[ 2.448373] usb_function_register: name = 'modem', map = 2
<6>[ 2.453144] usb_function_register: name = 'nmea', map = 3
<6>[ 2.458578] usb_function_register: name = 'ethernet', map = 5
<6>[ 2.465061] synaptics_load_rmi4_func_regs: Func:f11_2D Query_Base:0x7a Cmd_Base:0x59 Ctrl_Base:0x26 Data_Base:0x18
<6>[ 2.475183] synaptics_load_rmi4_func_regs: Func:f08_BIST Query_Base:0x78 Cmd_Base:0x58 Ctrl_Base:0x20 Data_Base:0x15
<6>[ 2.485694] synaptics_load_rmi4_func_regs: Func:f01_RMI Query_Base:0x63 Cmd_Base:0x57 Ctrl_Base:0x1e Data_Base:0x13
<6>[ 2.601839] synaptics_ts_probe: nbr_panels:1 nbr_fingers:1 data_size:5
<6>[ 2.602733] synaptics_ts_probe: fw_rev:17 max_x:1632 max_y:2156
<6>[ 2.608656] synaptics_ts_probe: max_x 1632, max_y 2156
<6>[ 2.613771] synaptics_ts_probe: inactive_x 0 0, inactive_y 0 0
<6>[ 2.619574] synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0
<6>[ 2.625904] input: synaptics-rmi-touchscreen as /devices/virtual/input/input0
<6>[ 2.633146] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
<6>[ 2.641888] GPIO Matrix Keypad Driver: Start keypad matrix for robyn_keypad in interrupt mode
<6>[ 2.650031] input: robyn_keypad as /devices/virtual/input/input1
<7>[ 2.656608] RTC Registering with rs30000048:00010000
<7>[ 2.657676] msm_rtc: dev (254:0)
<6>[ 2.657724] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
<7>[ 2.664044] msm_rtc_secure: dev (254:1)
<6>[ 2.664064] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc_secure as rtc1
<6>[ 2.672664] i2c /dev entries driver
<6>[ 2.677203] input: compass as /devices/virtual/input/input2
<6>[ 2.730606] Bosch Sensortec Device detected!
<6>[ 2.730618] BMA150/SMB380 registered I2C driver!
<6>[ 2.733861] register_chrdev
<6>[ 2.736793] class_create ok
<6>[ 2.739681] BMA150 device create ok
<6>[ 2.743949] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.747311] Bluetooth: HCI H4 protocol initialized
<6>[ 2.752108] Bluetooth: HCI BCSP protocol initialized
<6>[ 2.757029] Bluetooth: HCILL protocol initialized
<7>[ 2.761731] bluetooth_power_init
<7>[ 2.761814] bt_power_probe
<6>[ 2.763421] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,113 dma 8
<6>[ 2.768574] mmc0: 8 bit data mode disabled
<6>[ 2.772693] mmc0: 4 bit data mode enabled
<6>[ 2.776648] mmc0: polling status mode disabled
<6>[ 2.781116] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[ 2.787411] mmc0: Slot eject status = 0
<6>[ 2.791244] mmc0: Power save feature enable = 1
<6>[ 2.795749] mmc0: DM non-cached buffer at ffa20000, dma_addr 0x0cddc000
<6>[ 2.802356] mmc0: DM cmd busaddr 0x0cddc000, cmdptr busaddr 0x0cddc300
<6>[ 2.809724] lm3530 probing
<6>[ 2.815201] Registered semc device: lm3530-led
<6>[ 2.815973] lm3530 0-0036: version 0.1 loaded
<6>[ 2.820609] Adding I2C driver for LM35300)
<6>[ 2.824564] msm_pmic_flash_led probing
<6>[ 2.832014] Registered semc device: spotlight
<6>[ 2.832858] Registered semc device: flashled
<6>[ 2.836891] msm_pmic_flash_led version 0.1 loaded
<6>[ 2.845868] logger: created 64K log 'log_main'
<6>[ 2.846371] logger: created 256K log 'log_events'
<6>[ 2.856069] logger: created 64K log 'log_radio'
<6>[ 2.862094] Advanced Linux Sound Architecture Driver Version 1.0.18a.
<4>[ 2.868554] No device for DAI CODEC_DAI
<4>[ 2.868644] No device for DAI CPU_DAI
<3>[ 2.875876] msm_soc: create pcms
<6>[ 2.876268] asoc: CODEC_DAI <-> CPU_DAI mapping ok
<3>[ 2.878413] msm_soc: ALSA MSM Mixer Setting
<6>[ 2.884941] ALSA device list:
<6>[ 2.885529] #0: msm-audio (MSM-CARD)
<6>[ 2.889313] TCP cubic registered
<6>[ 2.892486] NET: Registered protocol family 17
<6>[ 2.896921] Bluetooth: L2CAP ver 2.13
<6>[ 2.900586] Bluetooth: L2CAP socket layer initialized
<6>[ 2.905568] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 2.910071] Bluetooth: SCO socket layer initialized
<6>[ 2.917104] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.920104] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.924936] Bluetooth: RFCOMM ver 1.11
<6>[ 2.928651] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.933988] Bluetooth: BNEP filters: protocol multicast
<6>[ 2.939153] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.945766] RPC: Registered udp transport module.
<6>[ 2.949766] RPC: Registered tcp transport module.
<6>[ 2.954894] clock_late_init() disabled 15 unused clocks
<6>[ 2.960904] input: 7k_handset as /devices/virtual/input/input3
<6>[ 2.967043] smsm_entry 7, new intr_mask 0
<6>[ 2.969453] smsm_entry 6, new intr_mask 0
<6>[ 2.973643] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>[ 2.994258] [drm] Initialized kgsl 2.0.0 20090810 on minor 0
<6>[ 2.994918] msm_v4l2: msm_v4l2_init
<6>[ 2.998974] rs30000048:00010000 rs30000048:00010000: setting system
clock to 2010-06-26 06:06:05 UTC (1277532365)
<6>[ 3.008203] Freeing init memory: 140K
<6>[ 3.120511] usb_lpm_enter: usb in low power mode
<6>[ 3.120628] hsusb: IDLE -> OFFLINE
<3>[ 3.171403] init: /init.rc: 218: invalid option 'busybox'
<3>[ 3.172109] init: /init.delta.rc: 74: ignored duplicate definition of service 'qmuxd'
<4>[ 3.233606] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[ 3.236084] mmc0: new SD card at address aaaa
<6>[ 3.250378] mmcblk0: mmc0:aaaa SU02G 1.84 GiB
<6>[ 3.250734] mmcblk0: p1
<6>[ 3.363538] yaffs: dev is 32505856 name is "mtdblock0"
<6>[ 3.363658] yaffs: passed flags ""
<4>[ 3.366456] yaffs: Attempting MTD mount on 31.0, "mtdblock0"
<4>[ 3.476239] yaffs: restored from checkpoint
<4>[ 3.476386] yaffs_read_super: isCheckpointed 1
<6>[ 3.479724] yaffs: dev is 32505859 name is "mtdblock3"
<6>[ 3.484386] yaffs: passed flags ""
<4>[ 3.487751] yaffs: Attempting MTD mount on 31.3, "mtdblock3"
<4>[ 3.573716] yaffs: restored from checkpoint
<4>[ 3.585258] yaffs_read_super: isCheckpointed 0
<6>[ 3.591041] yaffs: dev is 32505857 name is "mtdblock1"
<6>[ 3.591156] yaffs: passed flags ""
<4>[ 3.593948] yaffs: Attempting MTD mount on 31.1, "mtdblock1"
<4>[ 3.601418] yaffs: restored from checkpoint
<4>[ 3.603759] yaffs_read_super: isCheckpointed 1
<3>[ 3.635841] init: execve /sbin/checkabortedflash
<3>[ 3.653221] init: waitpid return (PID = 1051)
<3>[ 3.653339] init: child process exited normally
<3>[ 3.741036] init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<3>[ 3.772914] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>[ 3.894298] SMD: ch 40 CLOSED -> OPENING
<6>[ 3.894483] SMD: ch 40 OPENING -> OPENED
<6>[ 3.897733] SMD: ch 41 CLOSED -> OPENING
<6>[ 3.900471] SMD: ch 41 OPENING -> OPENED
<6>[ 3.905264] SMD: ch 42 CLOSED -> OPENING
<6>[ 3.908278] SMD: ch 42 OPENING -> OPENED
<6>[ 4.492636] bq24180: Set charger safety limit voltage to 4200 mV
<6>[ 4.494706] bq24180: Set charger safety limit current to 650 mA
<6>[ 4.496751] bq24180: Set charge current termination to 200 mA
<6>[ 4.504173] proximity-sensor (th_set): threshold=27
<6>[ 4.509206] proximity-sensor (hyst_set): hysteresis=8
<6>[ 5.448834] [msm-audio:snd.c:snd_ioctl] snd_agc_ctl 1
<6>[ 5.456164] warning: `Mixer Thread fo' uses 32-bit capabilities (legacy support in use)
<6>[ 5.458816] [msm-audio:snd.c:snd_ioctl] snd_set_device 29 1 1
<6>[ 5.468999] [msm-audio:snd.c:snd_ioctl] snd_set_device 29 1 0
<6>[ 5.477079] [msm-audio:snd.c:snd_ioctl] snd_set_volume 26 0 7
<6>[ 5.477841] [msm-audio:snd.c:snd_ioctl] snd_set_volume 27 0 7
<6>[ 5.480276] [msm-audio:snd.c:snd_ioctl] snd_set_volume 28 0 7
<6>[ 5.481043] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 7
<6>[ 5.481694] [msm-audio:snd.c:snd_ioctl] snd_set_volume 30 0 7
<6>[ 5.482381] [msm-audio:snd.c:snd_ioctl] snd_set_volume 31 0 7
<6>[ 5.483063] [msm-audio:snd.c:snd_ioctl] snd_set_volume 32 0 7
<6>[ 5.483968] [msm-audio:snd.c:snd_ioctl] snd_set_volume 33 0 7
<6>[ 5.484656] [msm-audio:snd.c:snd_ioctl] snd_set_volume 34 0 7
<6>[ 5.485271] [msm-audio:snd.c:snd_ioctl] snd_set_volume 35 0 7
<6>[ 5.485914] [msm-audio:snd.c:snd_ioctl] snd_set_volume 36 0 7
<6>[ 5.486613] [msm-audio:snd.c:snd_ioctl] snd_set_volume 37 0 7
<6>[ 5.487503] [msm-audio:snd.c:snd_ioctl] snd_set_volume 56 0 7
<6>[ 5.488218] [msm-audio:snd.c:snd_ioctl] snd_set_volume 38 0 7
<6>[ 5.488899] [msm-audio:snd.c:snd_ioctl] snd_set_volume 39 0 7
<6>[ 5.489566] [msm-audio:snd.c:snd_ioctl] snd_set_volume 40 0 7
<6>[ 5.490268] [msm-audio:snd.c:snd_ioctl] snd_set_volume 41 0 7
<6>[ 5.491174] [msm-audio:snd.c:snd_ioctl] snd_set_volume 42 0 7
<6>[ 5.491911] [msm-audio:snd.c:snd_ioctl] snd_set_volume 43 0 7
<6>[ 5.492576] [msm-audio:snd.c:snd_ioctl] snd_set_volume 44 0 7
<6>[ 5.493266] [msm-audio:snd.c:snd_ioctl] snd_set_volume 45 0 7
<6>[ 5.493894] [msm-audio:snd.c:snd_ioctl] snd_set_volume 46 0 7
<6>[ 5.494801] [msm-audio:snd.c:snd_ioctl] snd_set_volume 47 0 7
<6>[ 5.495534] [msm-audio:snd.c:snd_ioctl] snd_set_volume 48 0 7
<6>[ 5.496211] [msm-audio:snd.c:snd_ioctl] snd_set_volume 49 0 7
<6>[ 5.496873] [msm-audio:snd.c:snd_ioctl] snd_set_volume 50 0 7
<6>[ 5.497539] [msm-audio:snd.c:snd_ioctl] snd_set_volume 51 0 7
<6>[ 5.498448] [msm-audio:snd.c:snd_ioctl] snd_set_volume 52 0 7
<6>[ 5.499248] [msm-audio:snd.c:snd_ioctl] snd_set_volume 53 0 7
<6>[ 5.499889] [msm-audio:snd.c:snd_ioctl] snd_set_volume 54 0 7
<6>[ 5.500524] [msm-audio:snd.c:snd_ioctl] snd_set_volume 55 0 7
<6>[ 10.442193] pmem: successful request for physical address of pmem region id 3,
offset 41521152, len 4194304
<6>[ 10.500393] misc kgsl: firmware: requesting yamato_pm4.fw
<6>[ 10.510956] misc kgsl: firmware: requesting yamato_pfp.fw
<3>[ 10.512303] init: untracked pid 1153 exited
<3>[ 10.516329] init: untracked pid 1156 exited
<6>[ 33.928733] request_suspend_state: wakeup (3->0) at 33928558408
(2010-06-26 06:06:36.429746690 UTC)
<6>[ 35.140503] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 5
<6>[ 35.340956] [msm-audio:snd.c:snd_ioctl] snd_set_volume 29 0 7
<6>[ 36.830411] bq24180: Strange HW behaviour. Got safety timer fault but HW timer is disabled.
<3>[ 36.830448] bq24180: Charger Ready
<3>[ 37.130403] bq24180: Charger Ready
<6>[ 37.960528] input: systemconnector as /devices/virtual/input/input4
<7>[ 38.090198] SEMC_PHF (Interrupt handler) Status changed. Headset is not inserted
<6>[ 38.090639] semc_power: Disabling DCOUT. Current: 1000
<6>[ 52.121653] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 52.121664] tick = 1932058
<6>[ 52.121671] stamp = 50413832199208961
<6>[ 52.130404] rs30000048:00010000 rs30000048:00010000: setting system
clock to 2010-06-26 06:06:54 UTC (1277532414)
<3>[ 57.796259] binder: release proc 1527, transaction 6042, not freed
<6>[ 143.176619] [msm-audio:audmgr.c:audmgr_rpc_thread] start
<6>[ 143.184273] [msm-audio:audio_out.c:audio_enable]
<6>[ 143.184304] [msm-audio:audmgr.c:audmgr_enable] session 0x80532ca0
<6>[ 143.185274] [msm-audio:audmgr.crocess_audmgr_callback] rpc READY handle=0x00000000
<6>[ 143.185678] [msm-audio:audmgr.c:audmgr_rpc_thread] rpc_reply status 0
<6>[ 143.237589] [msm-audio:audmgr.crocess_audmgr_callback] rpc CODEC_CONFIG
volume=0x00000406
<6>[ 143.239933] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] INIT_INFO Event
<6>[ 143.240533] [adsp:adsp.c:msm_adsp_get] opening module AUDPPTASK
<6>[ 143.241208] [adsp:adsp.c:msm_adsp_get] module AUDPPTASK has been registered
<6>[ 143.241234] [adsp:adsp.c:msm_adsp_enable] enable 'AUDPPTASK'state[0] id[17227122]
<6>[ 143.242614] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] rpc event=0, proc_id=2,
module=17227122, image=0
<6>[ 143.243199] [adsp:adsp.c:handle_adsp_rtos_mtoa_app] module AUDPPTASK: READY
<6>[ 143.244721] [msm-audio:audpp.c:audpp_dsp_event] ENABLE
<6>[ 143.244749] [msm-audio:audio_out.c:audio_dsp_event] CFG_MSG ENABLE
<3>[ 143.244831] [adsp:adsp.c:__msm_adsp_write] failed to write queue 140, retry
<3>[ 143.244886] [adsp:adsp.c:__msm_adsp_write] failed to write queue 140, retry
<6>[ 146.284549] [msm-audio:audio_out.c:audio_dsp_event] PCMDMAMISSED 32
<6>[ 149.222186] [msm-audio:audio_out.c:audio_disable]
<6>[ 149.222828] [msm-audio:audio_out.c:audio_dsp_event] CFG_MSG DISABLE
<6>[ 149.222931] [msm-audio:audpp.c:audpp_dsp_event] DISABLE
<6>[ 149.223009] [msm-audio:audpp.c:audpp_disable] Received CFG_MSG_DISABLE from ADSP
<6>[ 149.223061] [adsp:adsp.c:msm_adsp_disable] disable 'AUDPPTASK'
<6>[ 149.226809] [adsp:adsp.c:msm_adsp_disable_locked] disable interrupt
<6>[ 149.226864] [adsp:adsp.c:msm_adsp_put] closing module AUDPPTASK
<6>[ 149.226948] [msm-audio:audmgr.c:audmgr_disable] session 0x80532ca0
<6>[ 149.230789] [msm-audio:audmgr.c:audmgr_rpc_thread] rpc_reply status 0
<3>[ 149.241483] [msm-audio:audmgr.crocess_audmgr_callback] DISABLED
Bin4ry said:
This user got update:
Phone Software Version:
1235-3408_1.1.A.0.8
GEBERIC - user
File System Version:
WORLD-1-8_1.1.A.0.8
German User!
Regards
Bin4ry
Click to expand...
Click to collapse
I take it he has a generic handset or does he have a provider handset?
*edit*
Just tried with no luck
*double post*
No OTA in Spain as well
Tried with Movistar, but it was already in 11A08 and said "already in latest version"; debranded to 10A136 and tried again but no luck,same message trought OTA. Update detected in SEUS from 10A136 to 11A08, updated succefully to debranded version.
Could it be that OTA examines both the Fyle System Version and Software Version? I entered service menu and the data was:
Phone Software Version
1235-3408_1.0.A.1.36
GENERIC - user
File System Version
WORLD-1-8_1.1A.0.8
So it seems that the software version was downgraded, but it kept the 11A08 in file system. Checking it in Settings-> About the Phone it was still marked as 11A08 Compilation.
Sorry for the long post, maybe it's all a nonsense, but just trying to get the OTA info I stepped into this and seemed curious... I'll keep checking.
Good luck for everybody!!
So I've seen plenty of topics about other phones but had a difficult time finding anything regarding the HTC legend. I've already soldered my USB to micro USB and took a blade to a micro usb charger cord.
What I'm unsure about is how to tell if I went into USB host mode or not using the micro usb input I've got. It didn't have any noticable resistor on it, this is from a wall to phone charger if that matters.
I'm using Cyanogenmod 7.0 RC2
From what it looks like there's only the solder points for that + and - wires
Picture of micro usb input: http://i42.tinypic.com/116i493.jpg
Everything in one happy picture(do not click if bad soldering makes you cry): http://i41.tinypic.com/2ykxbtu.jpg
When I connected a mouse I don't use to see if the light would come on but that wasn't promising. I removed the micro usb when the little skateboarding startup logo showed and waited for the phone to start, when I plugged in my device dmesg only showed some ALS lines, which from short searching revealed it was something regarding GSM, but nothing regarding a mouse or anything about device.
Now I'm not expecting to use a USB mouse I want to use a USB keyboard(roll-up ) I just don't have a USB keyboard right now to really test.
Thanks for your time.
I compiled the kernel ver 2.6.25 for htc legend (cyanogen 7.2 rom), applied the hack from Sven Killing, hacked a home made cable for usb host mode and tested keyboard and mouse and both work fine!
I made some changes on the kernel (Kconfig and ehci-msm7201.c / .h), if somebody need it i can upload my kernel.
my kernel dmesg:
...
<6>[ 0.260314] [DISP]mdp_probe: initialized
<6>[ 0.260986] usbcore: registered new interface driver usbfs
<6>[ 0.261322] usbcore: registered new interface driver hub
<6>[ 0.261688] usbcore: registered new device driver usb
<6>[ 0.262207] msm_i2c_probe
<6>[ 0.262542] msm_i2c_probe: clk_ctl 315, 400000 Hz
<6>[ 0.264587] Bluetooth: Core ver 2.15
<6>[ 0.264862] NET: Registered protocol family 31
<6>[ 0.265075] Bluetooth: HCI device and connection manager initialized
<6>[ 0.265441] Bluetooth: HCI socket layer initialized
<6>[ 0.265838] Switching to clocksource gp_timer
<6>[ 0.267547] NET: Registered protocol family 2
<6>[ 0.267944] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.268798] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.269531] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.270294] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.270507] TCP reno registered
<6>[ 0.270874] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.271087] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.271697] NET: Registered protocol family 1
<6>[ 0.272155] Unpacking initramfs...
<6>[ 0.291229] Freeing initrd memory: 144K
...
<6>[ 0.692687] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.692871] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 0.694946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[ 0.695343] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
<7>[ 0.695678] usb_hcd_msm7201_probe()
<7>[ 0.695861] initializing MSM7201/QSD8X50/MSM7227 USB Controller
<6>[ 0.716461] msm_hsusb msm_hsusb: Qualcomm MSM7201/QSD8X50/MSM7227 On-Chip EHCI Host Controller
<6>[ 0.716888] msm_hsusb msm_hsusb: new USB bus registered, assigned bus number 1
<7>[ 0.717132] msm_hsusb msm_hsusb: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
<7>[ 0.717620] msm_hsusb msm_hsusb: park 0
<7>[ 0.717834] msm_hsusb msm_hsusb: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 0.718261] msm_hsusb msm_hsusb: irq 47, io mem 0xa0800000
<6>[ 0.737243] hub 1-0:1.0: USB hub found
<6>[ 0.737457] hub 1-0:1.0: 1 port detected
<4>[ 0.738037] ------------[ cut here ]------------
<4>[ 0.738433] WARNING: at kernel/irq/manage.c:290 enable_irq+0x5c/0xb4()
<4>[ 0.738616] Unbalanced enable for IRQ 47
<4>[ 0.738983] Modules linked in:
<4>[ 0.739410] [<c00359e8>] (unwind_backtrace+0x0/0xf0) from [<c0072068>] (warn_slowpath_common+0x4c/0x64)
<4>[ 0.739807] [<c0072068>] (warn_slowpath_common+0x4c/0x64) from [<c0072100>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 0.740203] [<c0072100>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00aa6a4>] (enable_irq+0x5c/0xb4)
<4>[ 0.740417] [<c00aa6a4>] (enable_irq+0x5c/0xb4) from [<c0275714>] (usb_hcd_msm7201_probe+0x25c/0x30c)
<4>[ 0.740814] [<c0275714>] (usb_hcd_msm7201_probe+0x25c/0x30c) from [<c0245e44>] (platform_drv_probe+0x18/0x1c)
<4>[ 0.741210] [<c0245e44>] (platform_drv_probe+0x18/0x1c) from [<c0244fb8>] (driver_probe_device+0xa8/0x158)
<4>[ 0.741607] [<c0244fb8>] (driver_probe_device+0xa8/0x158) from [<c02450c8>] (__driver_attach+0x60/0x84)
<4>[ 0.741973] [<c02450c8>] (__driver_attach+0x60/0x84) from [<c024480c>] (bus_for_each_dev+0x48/0x84)
<4>[ 0.742370] [<c024480c>] (bus_for_each_dev+0x48/0x84) from [<c0244144>] (bus_add_driver+0x9c/0x21c)
<4>[ 0.742584] [<c0244144>] (bus_add_driver+0x9c/0x21c) from [<c0245398>] (driver_register+0xa8/0x138)
<4>[ 0.742980] [<c0245398>] (driver_register+0xa8/0x138) from [<c0019938>] (ehci_hcd_init+0xac/0x108)
<4>[ 0.743377] [<c0019938>] (ehci_hcd_init+0xac/0x108) from [<c0030384>] (do_one_initcall+0x5c/0x1b0)
<4>[ 0.743743] [<c0030384>] (do_one_initcall+0x5c/0x1b0) from [<c0008410>] (kernel_init+0xb0/0x16c)
<4>[ 0.744140] [<c0008410>] (kernel_init+0xb0/0x16c) from [<c00318a8>] (kernel_thread_exit+0x0/0x8)
<4>[ 0.744384] ---[ end trace a88e7bb8f2db6923 ]---
<6>[ 0.745025] android init
<6>[ 0.745269] android_probe pdata: c0537a70
<6>[ 0.745635] f_adb init
<6>[ 0.745819] android_register_function adb
<6>[ 0.746032] f_mass_storage init
<6>[ 0.746276] fsg_probe pdev: c0537bd8, pdata: c05383bc
<6>[ 0.746795] android_register_function usb_mass_storage
<6>[ 0.746978] f_rndis init
<6>[ 0.747314] android_register_function rndis
<6>[ 0.747650] f_accessory init
<6>[ 0.747863] android_register_function accessory
<3>[ 0.748626] msm_i2c msm_i2c.0: error, status c8 (20,E4,00)(20,F4,00)(cnt:1,pos:0)
<3>[ 0.749053] msm_i2c msm_i2c.0: Error during data xfer (-5) (20,E4,00)
<6>[ 0.856872] synaptics_ts_probe: Product Major Version 1
<6>[ 0.857421] synaptics_ts_probe: Product Minor Version 3
<6>[ 0.857940] synaptics_ts_probe: product property 2
<6>[ 0.858642] synaptics_ts_probe: device control 81
<6>[ 0.859191] synaptics_ts_probe: interrupt enable 1
<6>[ 0.877288] synaptics_ts_probe: 0xe0: 1 1 1 2 1 3 0 0
<6>[ 0.896911] synaptics_ts_probe: Sensor properties 701
<6>[ 0.976715] synaptics_ts_probe: max_x 3668, max_y 5460
<6>[ 0.976928] synaptics_ts_probe: inactive_x -11 -11, inactive_y -11 -11
<6>[ 0.977294] synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0
<6>[ 0.977508] synaptics_ts_probe: margin_pixel_left: 0, margin_pixel_right: 0, margin_pixel_top: 0, margin_pixel_bottom: 0
<6>[ 0.977874] synaptics_ts_probe: ts_raw_width: 3646, ts_raw_height: 5438
....
<6>[ 2.079620] [KEY] GPIO Matrix Keypad Driver: Start keypad matrix for legend-keypad in interrupt mode
<6>[ 2.080291] [KEY] GPIO Input Driver: Start gpio inputs for legend-keypad in interrupt mode
<6>[ 2.081024] input: legend-keypad as /devices/virtual/input/input3
<6>[ 2.082214] input: lightsensor-level as /devices/virtual/input/input4
<6>[ 2.082977] [LS][CM3602] set_ls_kvalue: ALS calibrated als_kadc=0x6da50053
<6>[ 2.083160] [LS][CM3602] set_ls_kvalue: als_kadc=0x53, als_gadc=0xc0
<6>[ 2.083374] [LS][CM3602] ls_table: data[0] , data[0] = 0, 0
<6>[ 2.083740] [LS][CM3602] ls_table: data[1] , data[1] = 0, e
<6>[ 2.083953] [LS][CM3602] ls_table: data[2] , data[2] = 0, 21
<6>[ 2.084320] [LS][CM3602] ls_table: data[3] , data[3] = 0, 5f
<6>[ 2.084503] [LS][CM3602] ls_table: data[4] , data[4] = 0, 85
<6>[ 2.084869] [LS][CM3602] ls_table: data[5] , data[5] = 0, ab
<6>[ 2.085083] [LS][CM3602] ls_table: data[6] , data[6] = 0, d1
<6>[ 2.085449] [LS][CM3602] ls_table: data[7] , data[7] = 1, 2d
<6>[ 2.085632] [LS][CM3602] ls_table: data[8] , data[8] = 1, 73
<6>[ 2.086029] [KEY] gpio_keys_scan_keys: key 1-116, 0 (20) changed to 0
<6>[ 2.086242] [LS][CM3602] ls_table: data[9] , data[9] = 3, ff
<7>[ 2.088623] __capella_cm3602_power: Turn the capella_cm3602 power on
<6>[ 2.089141] using input dev h2w headset for key reset
<6>[ 2.089538] using input dev legend-keypad for key reset
<6>[ 2.090332] input: curcial-oj as /devices/virtual/input/input5
<6>[ 2.090881] using input dev curcial-oj for key reset
<3>[ 2.092376] curcial_oj_poweronJower status ok
<6>[ 2.140625] OpticalJoystick Device ID: 0d
<6>[ 2.143493] OJ Driver: Revision : 02
<6>[ 2.146240] OJ: driver loaded
<6>[ 2.147460] using rtc device, msm_rtc, for alarms
<6>[ 2.147857] rs30000048:00010004 rs30000048:00010004: rtc core: registered msm_rtc as rtc0
<6>[ 2.148468] AKM8973 compass driver: init
<6>[ 2.149536] input: compass as /devices/virtual/input/input6
<6>[ 2.150421] [FLT]adp1650 Led Flash driver: init
<4>[ 2.150848] [CAM]s5k4e1gx_init
<4>[ 2.151123] [CAM]__s5k4e1gx_probe
<6>[ 2.151336] [CAM]s5k4e1gx_vreg_enable camera vreg on
<3>[ 2.151672] [CAM]sensor platform_data didnt register
<3>[ 2.151885] [CAM]__s5k4e1gx_probe fail sensor power on error
<6>[ 2.152404] [CAM]sctrl.node 0
<4>[ 2.152587] [CAM]s5k4e1gx_sensor_probe()
<6>[ 2.152832] [CAM]s5k4e1gx_probe called!
<6>[ 2.203308] [CAM]s5k4e1gx_probe successed! rc = 0
<6>[ 2.203552] [CAM]s5k4e1gx s->node 0
<6>[ 2.249176] [CAM]s5k4e1gx_sensor_init(): reseting sensor.
<6>[ 2.250305] [CAM]sensor_lc_disable=0
<4>[ 2.334533] [CAM]sensor evt version : 0x10
<4>[ 2.334716] [CAM]use analog_settings_evt3
<6>[ 2.345367] s5k4e1gx_sysfs_init : kobject_create_and_add
<6>[ 2.345581] s5k4e1gx_sysfs_init : sysfs_create_file
<6>[ 2.346893] device-mapper: uevent: version 1.0.3
<6>[ 2.347534] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
<6>[ 2.348144] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.348358] Bluetooth: HCI H4 protocol initialized
<6>[ 2.348724] Bluetooth: HCILL protocol initialized
<7>[ 2.349731] msmsdcc_platform_status_irq: 102
<6>[ 2.349945] mmc0: Slot status change detected (0 -> 1)
<4>[ 2.350402] legend_sdslot_switchvdd::vdd=00000000 sdslot_vdd=ffffffff
<6>[ 2.350769] legend_sdslot_switchvdd: Disabling SD slot power
<4>[ 2.350982] off:MCI_Power=00000000
<4>[ 2.351165] off:MCI_Power=00000000
<6>[ 2.353820] mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,102 dma 8
<6>[ 2.354003] mmc0: Platform slot type: SD
<6>[ 2.354370] mmc0: 4 bit data mode enabled
<6>[ 2.354583] mmc0: 8 bit data mode disabled
<6>[ 2.354766] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 100000000 Hz
<6>[ 2.355133] mmc0: Slot eject status = 0
<6>[ 2.355346] mmc0: Power save feature enable = 1
<6>[ 2.355712] mmc0: DM non-cached buffer at ffa4a000, dma_addr 0x25669000
<6>[ 2.355895] mmc0: DM cmd busaddr 0x25669000, cmdptr busaddr 0x25669300
<7>[ 2.356689] Registered led device: amber
<7>[ 2.357055] Registered led device: green
<7>[ 2.357360] Registered led device: button-backlight
<6>[ 2.357757] microp_led_probe: succeeded
<6>[ 2.358612] usbcore: registered new interface driver usbhid
<6>[ 2.359008] usbhid: USB HID core driver
<6>[ 2.359741] logger: created 64K log 'log_main'
<6>[ 2.360076] logger: created 256K log 'log_events'
<6>[ 2.360565] logger: created 64K log 'log_radio'
<6>[ 2.360900] logger: created 64K log 'log_system'
<6>[ 2.361511] GACT probability NOT on
<6>[ 2.361724] Mirror/redirect action on
<6>[ 2.361938] u32 classifier
<6>[ 2.362121] Actions configured
<6>[ 2.362487] Netfilter messages via NETLINK v0.30.
<6>[ 2.362792] nf_conntrack version 0.5.0 (4653 buckets, 18612 max)
<4>[ 2.363464] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 2.363677] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 2.364044] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[ 2.364654] ctnetlink v0.93: registering with nfnetlink.
<6>[ 2.365112] xt_time: kernel timezone is -0000
<6>[ 2.365661] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.366210] arp_tables: (C) 2002 David S. Miller
<6>[ 2.366485] TCP cubic registered
<6>[ 2.367309] NET: Registered protocol family 10
<6>[ 2.368255] lo: Disabled Privacy Extensions
<6>[ 2.369659] Mobile IPv6
<6>[ 2.370025] IPv6 over IPv4 tunneling driver
<6>[ 2.370910] sit0: Disabled Privacy Extensions
<6>[ 2.371887] ip6tnl0: Disabled Privacy Extensions
<6>[ 2.372406] NET: Registered protocol family 17
<6>[ 2.372650] NET: Registered protocol family 15
<6>[ 2.373229] Bluetooth: L2CAP ver 2.14
<6>[ 2.373413] Bluetooth: L2CAP socket layer initialized
<6>[ 2.373626] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 2.373992] Bluetooth: SCO socket layer initialized
<6>[ 2.374328] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.374694] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.374877] Bluetooth: RFCOMM ver 1.11
<6>[ 2.375091] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.375457] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.376251] clock_late_init() disabled 20 unused clocks
<6>[ 2.376617] [Port list] init()
<6>[ 2.376892] [Port list] Virtual Address for port_list: [f8185a38]
<6>[ 2.377258] [Port list] Physical Address for port_list: [185A38]
<4>[ 2.378417] legend_wifi_init: start
<6>[ 2.379028] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>[ 2.381317] rs30000048:00010004 rs30000048:00010004: setting system clock to 2012-07-25 19:15:10 UTC (1343243710)
<4>[ 2.381774] Warning: unable to open an initial console.
<6>[ 2.382202] Freeing init memory: 160K
<3>[ 2.386505] init: /init.legend.rc: 1: invalid command 'device'
<4>[ 2.447052] legend_sdslot_switchvdd::vdd=00000011 sdslot_vdd=00000000
<6>[ 2.447509] legend_sdslot_switchvdd: Setting level to 2900
<4>[ 2.452728] on:MCI_Power=00000042
<4>[ 2.458099] on:MCI_Power=00000043
<6>[ 2.508544] yaffs: dev is 32505859 name is "mtdblock3" rw
<6>[ 2.508758] yaffs: passed flags ""
<7>[ 2.509155] yaffs: Attempting MTD mount of 31.3,"mtdblock3"
<4>[ 2.546569] legend_sdslot_switchvdd::vdd=00000010 sdslot_vdd=00000011
<6>[ 2.546936] legend_sdslot_switchvdd: Setting level to 2850
<7>[ 2.692291] yaffs: restored from checkpoint
<7>[ 2.693237] yaffs_read_super: isCheckpointed 1
<6>[ 2.697631] yaffs: dev is 32505861 name is "mtdblock5" rw
<6>[ 2.698059] yaffs: passed flags ""
<7>[ 2.698272] yaffs: Attempting MTD mount of 31.5,"mtdblock5"
<4>[ 2.756988] mmc0: high speed mode but max_dtr = 50000000
<4>[ 2.757629] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[ 2.758026] mmc0: new high speed SDHC card at address 80e6
<6>[ 2.758819] mmcblk0: mmc0:80e6 SU08G 7.40 GiB
<6>[ 2.759674] mmcblk0: p1
<7>[ 2.856689] block 195 is bad
<7>[ 2.889587] block 408 is bad
<7>[ 2.995269] block 1089 is bad
<7>[ 4.499725] yaffs_read_super: isCheckpointed 0
<6>[ 4.500366] yaffs: dev is 32505860 name is "mtdblock4" rw
<6>[ 4.500579] yaffs: passed flags ""
<7>[ 4.500915] yaffs: Attempting MTD mount of 31.4,"mtdblock4"
<7>[ 4.594360] yaffs_read_super: isCheckpointed 0
<3>[ 5.087188] init: service 'console' requires console
<6>[ 5.102844] [Port list] Add port [5555]
<6>[ 5.103179] [Port list] [1] = 5555
<6>[ 5.295257] warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>[ 5.380798] [SMD]SMD: ch 0 0 -> 1
<6>[ 5.381103] [SMD]SMD: ch 0 1 -> 2
<6>[ 5.389373] [SMD]SMD: ch 39 0 -> 1
<6>[ 5.389648] [SMD]SMD: ch 39 1 -> 2
<6>[ 5.389862] qmi: smd opened
<6>[ 5.390686] qmi: ctl: wds use client_id 0x01
<6>[ 5.391693] [SMD]SMD: ch 40 0 -> 1
<6>[ 5.391937] [SMD]SMD: ch 41 0 -> 1
<6>[ 5.392150] [SMD]SMD: ch 40 1 -> 2
<6>[ 5.392486] qmi: smd opened
<6>[ 5.392700] [SMD]SMD: ch 41 1 -> 2
<6>[ 5.392913] qmi: smd opened
<6>[ 5.393707] qmi: ctl: wds use client_id 0x01
<6>[ 5.393920] qmi: ctl: wds use client_id 0x01
<6>[ 6.343536] [AUD][snd.c:snd_ioctl] snd_set_device 1 1 1
<6>[ 6.344940] [AUD][snd.c:snd_rpc_thread] snd_rpc_thread() start
<6>[ 6.345306] [AUD][snd.c:snd_rpc_thread] snd: rpc_reply status 0
<6>[ 6.347076] [AUD][snd.c:snd_ioctl] snd_set_volume 256 0 5
<6>[ 6.348754] [AUD][snd.c:snd_rpc_thread] snd: rpc_reply status 0
<6>[ 12.975891] [DISP]msmfb: pan_update in state(1)
<6>[ 12.975891] [DISP]msmfb: full update starting
<6>[ 13.022674] [DISP]msmfb: full update completed
<6>[ 13.022918] [DISP]msmfb: turning on panel
<6>[ 13.023132] [DISP]lcdc_unblank: ()
<7>[ 13.023498] oled_panel_unblank type 0
<7>[ 13.023681] already unblank
<6>[ 13.158996] msm_kgsl: initilized dev=1 mmu=on
<7>[ 13.230957] [LS][CM3602] lightsensor_ioctl: get enabled status: 0
<6>[ 13.231597] [PS][CM3602] capella_cm3602_disable
<7>[ 13.231964] [PS][CM3602] capella_cm3602_disable: already disabled
<6>[ 13.232177] [PS][CM3602] capella_cm3602_disable
<7>[ 13.232360] [PS][CM3602] capella_cm3602_disable: already disabled
<2>[ 13.481384] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.481872] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.482208] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<3>[ 13.489410] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<2>[ 13.496582] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.497070] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.497467] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0004924b
<3>[ 13.498870] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<2>[ 13.569274] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.569671] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0002724b
<3>[ 13.570648] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<2>[ 13.756134] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<2>[ 13.756591] kgsl kgsl: |kgsl_mh_intrcallback| mmu page fault interrupt: 0000024b
<3>[ 13.756927] kgsl kgsl: |kgsl_ioctl_sharedmem_free| invalid gpuaddr 000000a3
<6>[ 20.758483] [BATT] SMEM_BATT: get_batt_info: batt_id=4, batt_vol=3704, batt_temp=347, batt_current=1, eval_current=0, level=34, charging_source=0, charging_enabled=0, full_bat=1300000, over_vchg=0 hv_enabled=0 at 20751727586 (2012-07-25 19:15:28.862563728 UTC)
<6>[ 20.759552] [BATT] SMEM_BATT: get_batt_info: batt_id=4, batt_vol=3704, batt_temp=347, batt_current=1, eval_current=0, level=34, charging_source=0, charging_enabled=0, full_bat=1300000, over_vchg=0 hv_enabled=0 at 20752795701 (2012-07-25 19:15:28.863631844 UTC)
<6>[ 20.813812] [VIB] er.ServerThread(parent:zygote): vibrates 0 msec
<6>[ 21.683471] [AUD][snd.c:snd_ioctl] snd_set_volume 256 0 4
<6>[ 21.685272] [AUD][snd.c:snd_rpc_thread] snd: rpc_reply status 0
<6>[ 22.412597] [VIB] er.ServerThread(parent:zygote): vibrates 0 msec
<6>[ 22.425964] [VIB] Thread-43(parent:zygote): vibrates 1 msec
<6>[ 22.427124] [ATS][set_vibration][successful]
<6>[ 22.427368] [VIB]vibrator_timer_func
<7>[ 22.432891] [LS][CM3602] lightsensor_ioctl: set value = 1
<6>[ 22.432922] [LS][CM3602] lightsensor_enable
<6>[ 22.436004] request_suspend_state: wakeup (3->0) at 22428485397 (2012-07-25 19:15:30.540084479 UTC)
<4>[ 22.442443] set_backlight_level:11
<6>[ 22.448455] [VIB] Thread-43(parent:zygote): vibrates 21 msec
<6>[ 22.450683] [ATS][set_vibration][successful]
<6>[ 22.469848] [VIB]vibrator_timer_func
<6>[ 22.764556] [LS][CM3602] ALS value: 0x0, level: 1 #
<6>[ 24.199127] [GSNR] Gsensor enable
<4>[ 24.610534] set_backlight_level:27
<6>[ 31.914062] [CAM]led_ril_status_value = 0
<6>[ 31.914398] phone_call_status_store: phone_call_status 0
<6>[ 31.914672] [CAM]led_ril_status_value = 0
<6>[ 31.915069] phone_call_status_store: phone_call_status 0
<6>[ 33.601135] [email protected], 4102
<6>[ 33.606445] [VIB] WindowManagerPo(parent:zygote): vibrates 0 msec
<6>[ 33.638183] [VIB] Thread-60(parent:zygote): vibrates 10 msec
<6>[ 33.639495] [ATS][set_vibration][successful]
<6>[ 33.648406] [VIB]vibrator_timer_func
<6>[ 33.668975] [VIB] Thread-60(parent:zygote): vibrates 30 msec
<6>[ 33.670318] [ATS][set_vibration][successful]
<6>[ 33.699432] [VIB]vibrator_timer_func
<6>[ 33.785430] [email protected], 3759
<6>[ 34.171966] [VIB] WindowManagerPo(parent:zygote): vibrates 0 msec
<6>[ 34.184417] [VIB] Thread-61(parent:zygote): vibrates 10 msec
<6>[ 34.185485] [ATS][set_vibration][successful]
<6>[ 34.194824] [VIB]vibrator_timer_func
<6>[ 34.215423] [VIB] Thread-61(parent:zygote): vibrates 30 msec
<6>[ 34.216613] [ATS][set_vibration][successful]
<6>[ 34.245849] [VIB]vibrator_timer_func
<6>[ 46.455596] [KEY] gpiomatrix: key 158, 2-0 (33-42) changed to 1
<6>[ 46.455993] [ATS][press_back][complete]
<6>[ 46.695861] [KEY] gpiomatrix: key 158, 2-0 (33-42) changed to 0
<6>[ 60.297607] Release 'boot-time' no_halt_lock
<7>[ 83.004089] msm_hsusb msm_hsusb: GetStatus port 1 status 8c001002 POWER sig=se0 CSC
<7>[ 83.077819] msm_hsusb msm_hsusb: GetStatus port 1 status 84001403 POWER sig=k CSC CONNECT
<6>[ 83.357788] usb 1-1: new low speed USB device using msm_hsusb and address 2
<7>[ 83.417724] msm_hsusb msm_hsusb: port 1 high speed
<7>[ 83.418640] msm_hsusb msm_hsusb: GetStatus port 1 status 84001405 POWER sig=k PE CONNECT
<6>[ 83.541931] input: USB-compliant keyboard as /devices/platform/msm_hsusb/usb1/1-1/1-1:1.0/input/input7
<7>[ 83.543029] usb 1-1: link qh8-0601/c61abca0 start 1 [1/2 us]
<6>[ 83.547912] using input dev USB-compliant keyboard for key reset
<6>[ 83.628845] generic-usb 0003:062A:0201.0001: input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-msm_hsusb-1/input0
<6>[ 83.720245] input: USB-compliant keyboard as /devices/platform/msm_hsusb/usb1/1-1/1-1:1.1/input/input8
<7>[ 83.725402] usb 1-1: link qh8-0601/c8fdf520 start 2 [1/2 us]
<6>[ 83.725982] using input dev USB-compliant keyboard for key reset
<6>[ 83.753570] generic-usb 0003:062A:0201.0002: input: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-msm_hsusb-1/input1
<6>[ 84.002807] [BATT] M2A_RPC: cable_update: USB at 83995563030 (2012-07-25 19:16:32.106887454 UTC)
<6>[ 84.003417] [BATT] htc_cable_status_update: 0 -> 1
<6>[ 84.003631] [USB] msm_hsusb_set_vbus_state: 1
<6>[ 157.127685] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 1
<6>[ 157.346679] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 0
<6>[ 165.024993] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 1
<6>[ 165.180328] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 0
<6>[ 202.730560] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 1
<6>[ 202.885864] [KEY] gpiomatrix: key 139, 0-1 (35-41) changed to 0
Hey guys and gals,
You probably have seen me around posting some kernels here and there and lurking in other threads.
As you know Cyanogen posted Prima_Wlan drivers on his github for use with his CM10 rom and kernels.. I have brought this into a sense based kernel in hopes of being able to produce a usable .ko for wifi. I have finally got it building with linaro 4.6.2 (wish it was 4.7.2). I am at an impass of my C knowledge and knowledge of android reaching its capacity with little to no resources to guide my efforts thus far.
I will not post source to these drivers as I do not wish to offend XDA or break the rules here. (we can figure something out if you would like to help in regards to getting you source) LIKE I SAID ITS ON GITHUB....
With that being said after being built successfully im running into module loading errors now
The following errors are occuring
Version 3.1.7.2
Code:
3>[ 49.242942] prima_wlan: driver load failure
<4>[ 49.355379] prima_wlan: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 49.358950] kmemleak: Trying to color unknown object at 0xbf648000 as Grey
<4>[ 49.359133] [<c010c8ec>] (unwind_backtrace+0x0/0x12c) from [<c01b5234>] (load_module+0x8a4/0x1544)
<4>[ 49.366915] [<c01b5234>] (load_module+0x8a4/0x1544) from [<c01b5f14>] (sys_init_module+0x40/0x190)
<4>[ 49.367343] [<c01b5f14>] (sys_init_module+0x40/0x190) from [<c0105ec0>] (ret_fast_syscall+0x0/0x30)
<6>[ 49.711796] prima_wlan: loading driver v3.1.7.16
<2>[ 49.748115] VOS ASSERT in vos_open Line 370
<4>[ 49.748298] ------------[ cut here ]------------
<4>[ 49.748969] WARNING: at drivers/staging/prima/CORE/VOSS/src/vos_api.c:370 vos_open+0x1bc/0x3d0 [prima_wlan]()
<4>[ 49.749244] Modules linked in: prima_wlan(C+) kineto_gan
<4>[ 49.749610] [<c010c8ec>] (unwind_backtrace+0x0/0x12c) from [<c017f13c>] (warn_slowpath_common+0x4c/0x64)
<4>[ 49.749763] [<c017f13c>] (warn_slowpath_common+0x4c/0x64) from [<c017f16c>] (warn_slowpath_null+0x18/0x1c)
<4>[ 49.750404] [<c017f16c>] (warn_slowpath_null+0x18/0x1c) from [<bf720038>] (vos_open+0x1bc/0x3d0 [prima_wlan])
<4>[ 49.751258] [<bf720038>] (vos_open+0x1bc/0x3d0 [prima_wlan]) from [<bf667774>] (hdd_wlan_startup+0x1a0/0x87c [prima_wlan])
<4>[ 49.751960] [<bf667774>] (hdd_wlan_startup+0x1a0/0x87c [prima_wlan]) from [<bf80a06c>] (hdd_module_init+0x6c/0x13c [prima_wlan])
<4>[ 49.752418] [<bf80a06c>] (hdd_module_init+0x6c/0x13c [prima_wlan]) from [<c0100550>] (do_one_initcall+0x94/0x164)
<4>[ 49.752601] [<c0100550>] (do_one_initcall+0x94/0x164) from [<c01b5f44>] (sys_init_module+0x70/0x190)
<4>[ 49.752754] [<c01b5f44>] (sys_init_module+0x70/0x190) from [<c0105ec0>] (ret_fast_syscall+0x0/0x30)
<4>[ 49.752937] ---[ end trace da227214a82491c5 ]---
<3>[ 49.789623] prima_wlan: driver load failure
tried with version 3.20.2
Code:
<4>[ 4104.489302] prima_wlan: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 4104.493666] kmemleak: Trying to color unknown object at 0xbf003000 as Grey
<4>[ 4104.493849] [<c010c8ec>] (unwind_backtrace+0x0/0x12c) from [<c01b5234>] (load_module+0x8a4/0x1544)
<4>[ 4104.494093] [<c01b5234>] (load_module+0x8a4/0x1544) from [<c01b5f14>] (sys_init_module+0x40/0x190)
<4>[ 4104.494276] [<c01b5f14>] (sys_init_module+0x40/0x190) from [<c0105ec0>] (ret_fast_syscall+0x0/0x30)
<6>[ 4104.785288] prima_wlan: loading driver v3.2.0.2
<3>[ 4104.792094] [0:10569:E :CTL] WCTS_OpenTransport: smd_named_open_on_edge failed with status -19
<2>[ 4104.792247] [0:10569:F :CTL] WDI_Init: Failed to open WCTS transport
<3>[ 4104.792399] [0:10569:E :WDA] WDI Init failed
<3>[ 4104.792491] [0:10569:F :VOS] vos_open: Failed to open WDA module
<2>[ 4104.792644] VOS ASSERT in vos_open Line 370
<4>[ 4104.792735] ------------[ cut here ]------------
<4>[ 4104.793620] WARNING: at drivers/staging/prima/CORE/VOSS/src/vos_api.c:370 vos_open+0x260/0x528 [prima_wlan]()
<4>[ 4104.793773] Modules linked in: prima_wlan(C+) kineto_gan
<4>[ 4104.794231] [<c010c8ec>] (unwind_backtrace+0x0/0x12c) from [<c017f13c>] (warn_slowpath_common+0x4c/0x64)
<4>[ 4104.794414] [<c017f13c>] (warn_slowpath_common+0x4c/0x64) from [<c017f16c>] (warn_slowpath_null+0x18/0x1c)
<4>[ 4104.794994] [<c017f16c>] (warn_slowpath_null+0x18/0x1c) from [<bf10045c>] (vos_open+0x260/0x528 [prima_wlan])
<4>[ 4104.795879] [<bf10045c>] (vos_open+0x260/0x528 [prima_wlan]) from [<bf02d804>] (hdd_wlan_startup+0x2a4/0xc60 [prima_wlan])
<4>[ 4104.796611] [<bf02d804>] (hdd_wlan_startup+0x2a4/0xc60 [prima_wlan]) from [<bf23c0b4>] (hdd_module_init+0xb4/0x1fc [prima_wlan])
<4>[ 4104.797039] [<bf23c0b4>] (hdd_module_init+0xb4/0x1fc [prima_wlan]) from [<c0100550>] (do_one_initcall+0x94/0x164)
<4>[ 4104.797222] [<c0100550>] (do_one_initcall+0x94/0x164) from [<c01b5f44>] (sys_init_module+0x70/0x190)
<4>[ 4104.797313] [<c01b5f44>] (sys_init_module+0x70/0x190) from [<c0105ec0>] (ret_fast_syscall+0x0/0x30)
<4>[ 4104.797466] ---[ end trace da227214a82492b2 ]---
<3>[ 4104.797741] [0:10569:F :HDD] hdd_wlan_startup: vos_open failed
<3>[ 4104.802776] [0:10569:F :HDD] hdd_module_init: WLAN Driver Initialization failed
<3>[ 4104.802929] prima_wlan: driver load failure
here is a successful load on stock version: v3.1.0.24p27
Code:
354.714939] prima_wlan: module license 'Proprietary' taints kernel.
<4>[ 354.715031] Disabling lock debugging due to kernel taint
354.996917] [WLAN] prima_wlan: loading driver v3.1.0.24p27-htc-63
<4>[ 354.719273] kmemleak: Trying to color unknown object at 0xbf003000 as Grey
<4>[ 354.719426] [<c010c2d0>] (unwind_backtrace+0x0/0x11c) from [<c01b006c>] (sys_init_module+0x858/0x1afc)
<4>[ 354.719914] [<c01b006c>] (sys_init_module+0x858/0x1afc) from [<c0105d20>] (ret_fast_syscall+0x0/0x30)
<6>[ 354.996917] [WLAN] prima_wlan: loading driver v3.1.0.24p27-htc-63
<6>[ 354.997070] [WLAN] vos_preOpen+
<6>[ 355.005920] [SMD] SMD: ch 7 0 -> 1, state: 0
<6>[ 355.008759] [SMD] SMD: ch 7 1 -> 2, state: 1
<6>[ 355.026522] [WLAN] [0:5551:I :SAP] WLANSAP_SetChannelRange:startChannel 1,EndChannel 11,Operatingband:0
<6>[ 355.026766] [WLAN] hdd_update_config_dat: apStartChannelNum = 1, apEndChannelNum = 11 apOperatingBand = 0
<6>[ 355.027132] [WLAN] [0:5551:F :HDD] hdd_update_config_from_nv: mac address [18:87:96:8c:f8:2e]
<6>[ 355.232229] [K][PM] CPU1: msm_pm_power_collapse: change clock rate (old rate = 0)
<6>[ 355.313261] prima_wlan: WCNSS WLAN version 0.0.2.0
<6>[ 355.313352] prima_wlan: WCNSS software version M8960AAAAANAAW1031120A
<6>[ 355.313779] prima_wlan: WCNSS hardware version WCN v3.0 IRIS v2.0 with 48MHz XO
<6>[ 355.313963] [WLAN] hdd_post_voss_start_config 3083 Set LI 1 to HDD Context DoneSQOS old = cc54e000 , dev = cc54e000
<6>[ 355.314695] [WLAN] [0:5555:E :WDA] WDA_PWR_SAVE_CFG req in wrong state 1
<6>[ 355.321532] [WLAN] register_wlan_suspend
<6>[ 355.321715] [WLAN] prima_wlan: driver loaded
<4>[ 355.321867] [WLAN] before finishing init+
<4>[ 355.321959] [WLAN] after finishing init+
<6>[ 355.329742] [WLAN] Rcvd eWNI_PMC_ENTER_IMPS_RSP success
<6>[ 355.343659] [WLAN] Rcvd eWNI_PMC_EXIT_IMPS_RSP with status = 0
<6>[ 355.347871] [WLAN] Rcvd eWNI_PMC_ENTER_IMPS_RSP success
<6>[ 355.579459] [TP][email protected],922
<6>[ 355.778544] [TP][email protected],442
<6>[ 355.851548] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[ 355.852830] [WLAN] Set country code: US
<6>[ 356.162856] [WLAN] iw_set_dynamic_mcbc_filter: Set MC BC Filter Config request: 3
<6>[ 356.265252] [WLAN] Set country code: US
<6>[ 356.265405] [WLAN] [0:5555:E :CTL] Received WDI_ProcessKeepAliveRsp Callback from HAL
<6>[ 356.265893] [WLAN] [0:5566:F :HDD] iw_set_band_config: band value 0 violate INI settings 1
<6>[ 356.351838] [LS][cm3629] get_ls_adc_value: raw adc = 0x9C, ls_calibrate = 0
<6>[ 356.351930] [cm3629] set_lsensor_range: low_thd = 0x18, high_thd = 0x15a
<6>[ 356.352327] [LS][cm3629] report_lsensor_input_event: ADC=0x07F, Level=4, l_thd = 0x18, h_thd = 0x15a
<6>[ 356.367587] [WLAN] iw_set_dynamic_mcbc_filter: Set MC BC Filter Config request: 3
<6>[ 356.463116] [WLAN] Rcvd eWNI_PMC_ENTER_IMPS_RSP success
<6>[ 356.473889] [WLAN] Connecting to 00:1d:7e:d2:ed:0b
<6>[ 356.477430] [WLAN] [0:5555:E :CTL] Received WDI_ProcessKeepAliveRsp Callback from HAL
<6>[ 356.479963] [WLAN] Rcvd eWNI_PMC_EXIT_IMPS_RSP with status = 0
<6>[ 356.499618] [WLAN] Authenticated with BSS
<6>[ 356.511094] [WLAN] hdd_AssociationCompletionHandler+
<6>[ 356.511124] [WLAN] connected to 00:1d:7e:d2:ed:0b
<6>[ 356.511460] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[ 356.512925] [WLAN] hdd_AssociationCompletionHandler reset assoc_timeout_counter
<6>[ 356.604913] [K] binder: release 5245:5257 transaction 110563 in, still active
<6>[ 356.604913] [K] binder: send failed reply for transaction 110563 to 5576:5593
<6>[ 356.782786] [WLAN] [0:5555:E :CTL] Received WDI_ProcessKeepAliveRsp Callback from HAL
<6>[ 363.365389] [WLAN] Rcvd eWNI_PMC_ENTER_BMPS_RSP with status = [email protected]:/ #
very similiar errors but im unsure of the actual nature of the errors other than tha VOS is failing to open a WDA module (wich was built with the driver)
Any input would be greatly welcomed by ALL kernel devs on the 8960 platform. I am starting this in hopes to spark some creativity i have not yet thought of.
Making some slight headway
luigi311 said:
Is the answer 5? Yea sorry way to complex for me XD
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I appreciate the nice words guys but would really like to focus on development in this thread
<4>[ 354.715031] Disabling lock debugging due to kernel taint
^^^
i wonder if this is effecting the driver from loading i also have been looking in the wifi wcnss folder to see if the atlerations i made to allow building are keeping it from actually working..
Z
When I first ported prima from cm for komodo I did all the work flashed it and no wifi. Cm changed things on the rom side which allowed it to work. So maybe a rom dev could help. That other kernel with prima wlan built from source works on sense but not aosp so to me it's a rom side conflict.
Sent from my EVO using Tapatalk 2
can someone who knows ROM's post a list of the files needed to support wifi rom side other than the *.ko file in /system/lib/modules
there has to be some stuff in /system/bin/ and /system/lib/ that supports wifi
heres a few that i can think of I'm sure theres more in framework ill take a deeper look and see what else I can find
system/etc/wifi
apstacon.conf
hostapd_default.conf
WCNSS_qcom_cfg_default
wpa_supplicant.conf
system/lib
libwifiscanner.so
libwpa_client.so
system/bin
wpa_cli
wpa_supplicant
steal25 said:
heres a few that i can think of I'm sure theres more in framework ill take a deeper look and see what else I can find
system/etc/wifi
apstacon.conf
hostapd_default.conf
WCNSS_qcom_cfg_default
wpa_supplicant.conf
system/lib
libwifiscanner.so
libwpa_client.so
system/bin
wpa_cli
wpa_supplicant
Click to expand...
Click to collapse
When i get back to my machine, I will get to some theory testing about the wifi drivers i have
i was patching upstream and the stock drivers broke after 3.0.20+
i want to patch up to at leats 3.0.50 for us and bring other features to the device that breaks wifi
mmmmmm fun time tonight
steal25 said:
heres a few that i can think of I'm sure theres more in framework ill take a deeper look and see what else I can find
system/etc/wifi
apstacon.conf
hostapd_default.conf
WCNSS_qcom_cfg_default
wpa_supplicant.conf
system/lib
libwifiscanner.so
libwpa_client.so
system/bin
wpa_cli
wpa_supplicant
Click to expand...
Click to collapse
so this yielded a slightly less ammount of complaint from the kernel
but this line sticks out at me
Code:
<6>[ 101.405341] prima_wlan: loading driver v3.1.7.16
<2>[ 101.413093] VOS ASSERT in vos_open Line 370
<4>[ 101.413184] ------------[ cut here ]------------
<4>[ 101.413947] WARNING: at drivers/staging/prima/CORE/VOSS/src/vos_api.c:370 vos_open+0x1bc/0x3d0 [prima_wlan]()
that corresponds to
Code:
if (!VOS_IS_STATUS_SUCCESS(vStatus))
{
/* Critical Error ... Cannot proceed further */
VOS_TRACE( VOS_MODULE_ID_VOSS, VOS_TRACE_LEVEL_FATAL,
"%s: Failed to open WDA module", __func__);
VOS_ASSERT(0);
goto err_sched_close;
}
notice in the HTC release version its VOSOPEN+
so i had a AOSP tester try my newer prima_wlan drivers
they loaded up first try on his AOSP rom
but on our sense rom they fail to load regardless of using the wifi dependancies of the AOSP rom
something else is going on deeper in the rom
I have this error with Razr HD too.
I think the problem is here:
Code:
[0:2714:E :CTL] WCTS_OpenTransport: smd_named_open_on_edge failed with status -19
The error -19 is -ENODEV (No such device).
smd_named_open_on_edge is defined in arch/arm/mach-msm/smd.c
---------- Post added at 11:32 AM ---------- Previous post was at 11:18 AM ----------
setting sys/module/smd/parameters/debug_mask to 1, kernel shows this on dmesg:
smd_open('WLAN_CTRL', dfadd280, bf34689c)
so is passing by the first -ENODEV inside the smd_named_open_on_edge function.
Maybe this is causing the problem (code from smd.c):
Code:
/* one final check to handle closing->closed race condition */
ch = smd_get_channel(name, edge);
if (!ch)
return -ENODEV;
epinter said:
I have this error with Razr HD too.
I think the problem is here:
Code:
[0:2714:E :CTL] WCTS_OpenTransport: smd_named_open_on_edge failed with status -19
The error -19 is -ENODEV (No such device).
smd_named_open_on_edge is defined in arch/arm/mach-msm/smd.c
---------- Post added at 11:32 AM ---------- Previous post was at 11:18 AM ----------
setting sys/module/smd/parameters/debug_mask to 1, kernel shows this on dmesg:
smd_open('WLAN_CTRL', dfadd280, bf34689c)
so is passing by the first -ENODEV inside the smd_named_open_on_edge function.
Maybe this is causing the problem (code from smd.c):
Code:
/* one final check to handle closing->closed race condition */
ch = smd_get_channel(name, edge);
if (!ch)
return -ENODEV;
Click to expand...
Click to collapse
but when i flash the same kernel module on AOSP it loads up first time no problem
so there is something more going on
Zarboz said:
but when i flash the same kernel module on AOSP it loads up first time no problem
so there is something more going on
Click to expand...
Click to collapse
I have an error during boot (occurs during module's first initialization): "Invalid MAC addresses in NV, autogenerated". Every module initializations ,except the first one which occurs during boot, gives me the error messages from previous post.
Maybe the problem is with the firmware file or config file.
epinter said:
I have an error during boot (occurs during module's first initialization): "Invalid MAC addresses in NV, autogenerated". Every module initializations ,except the first one which occurs during boot, gives me the error messages from previous post.
Maybe the problem is with the firmware file or config file.
Click to expand...
Click to collapse
i wonder....
it is most likely the firmware
epinter said:
I have an error during boot (occurs during module's first initialization): "Invalid MAC addresses in NV, autogenerated". Every module initializations ,except the first one which occurs during boot, gives me the error messages from previous post.
Maybe the problem is with the firmware file or config file.
Click to expand...
Click to collapse
did you set your riva to be forced into insecure mode?
Zarboz said:
did you set your riva to be forced into insecure mode?
Click to expand...
Click to collapse
Yes.
if I use the WCNSS_cfg.dat and WCNSS_qcom_cfg.ini from the driver and the WCNSS_qcom_wlan_nv.bin from /persist, I get the following error (everytime I try to insmod):
<3>[ 398.332336,0] [0:1826:E :CTL] Failed to start device with status eHAL_STATUS_FAILURE(5)
<3>[ 398.332397,0] [0:1826:F :WDA] WDA_wdiStartCallback: WDI_Start() failure reported
<3>[ 398.332519,0] [0:1826:E :CTL] Device Error detected code: 3 - transitioning to stopped state
<3>[ 398.332641,0] [0:1823:E :WDA] WDA_start: WDI_Start() failure detected
<3>[ 398.332702,0] [0:1823:E :VOS] vos_start: Failed to start WDA
<3>[ 398.332824,0] [0:1823:F :HDD] hdd_wlan_startup: vos_start failed
<3>[ 398.394384,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.394506,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.394567,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.394689,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.394750,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.394872,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.394964,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.395025,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.395147,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.395208,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.395330,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.395391,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.395482,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.395605,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.395666,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.395788,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.395849,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.395940,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.396032,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.396123,0] [0:1823:E :VOS] vos_list_destroy: list not initialized
<3>[ 398.414619,0] [0:1823:F :HDD] hdd_module_init: WLAN Driver Initialization failed
<3>[ 398.414741,0] wlan: driver load failure
Click to expand...
Click to collapse
I didn't try the firmware/wcnss.* from Xperia T yet ...
I upgraded the driver to 3.2.0.2, all the error messages are exactly the same.
epinter said:
Yes.
if I use the WCNSS_cfg.dat and WCNSS_qcom_cfg.ini from the driver and the WCNSS_qcom_wlan_nv.bin from /persist, I get the following error (everytime I try to insmod):
I didn't try the firmware/wcnss.* from Xperia T yet ...
I upgraded the driver to 3.2.0.2, all the error messages are exactly the same.
Click to expand...
Click to collapse
what device are yo using?
Zarboz said:
what device are yo using?
Click to expand...
Click to collapse
Razr HD XT925
epinter said:
Yes.
if I use the WCNSS_cfg.dat and WCNSS_qcom_cfg.ini from the driver and the WCNSS_qcom_wlan_nv.bin from /persist, I get the following error (everytime I try to insmod):
I didn't try the firmware/wcnss.* from Xperia T yet ...
I upgraded the driver to 3.2.0.2, all the error messages are exactly the same.
Click to expand...
Click to collapse
where did you find these files at ?
i cannot locate them in what i have to work with
Zarboz said:
where did you find these files at ?
i cannot locate them in what i have to work with
Click to expand...
Click to collapse
Here you can find the prima driver and its firmware:
https://www.codeaurora.org/gitweb/external/wlan/?p=prima.git;a=summary
My phone has the /persist partition, there I have the WCNSS_qcom_wlan_nv.bin.
epinter said:
Here you can find the prima driver and its firmware:
https://www.codeaurora.org/gitweb/external/wlan/?p=prima.git;a=summary
My phone has the /persist partition, there I have the WCNSS_qcom_wlan_nv.bin.
Click to expand...
Click to collapse
as per your suggestion i downgraded to the 3.1.1.14 drivers and made the couple mods you have in your git to allow loading
as well as insecure pl_riva
Code:
13.572501] wcnss_wlan triggered by userspace
<6>[ 13.610987] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.610987] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.611017] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.614771] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.614802] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.614802] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.688844] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.688875] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.688875] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.697909] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.697909] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.697939] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.747352] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.747352] [USBDIAG] diagchar_ioctl:kworker/u:3(parent:kthreadd): tgid=109
<6>[ 13.747382] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.759774] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.759774] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.759804] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.759804] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.814497] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.814497] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.814558] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.814558] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.814558] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.841904] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.841904] [USBDIAG] diagchar_ioctl:kworker/u:3(parent:kthreadd): tgid=109
<6>[ 13.841934] [USBDIAG] diagchar_ioctl:kworker/u:3(parent:kthreadd): tgid=109
<6>[ 13.841934] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.871661] [SMD] smd_alloc_channel() 'DS' cid=0 size=08192, [Stream mode]
<6>[ 13.872791] [SMD] smd_alloc_channel() 'DATA1' cid=26 size=08192, [Package mode]
<6>[ 13.873432] [SMD] smd_alloc_channel() 'DATA2' cid=27 size=08192, [Package mode]
<6>[ 13.874133] [SMD] smd_alloc_channel() 'DATA3' cid=28 size=08192, [Package mode]
<6>[ 13.874866] [SMD] smd_alloc_channel() 'DATA4' cid=29 size=08192, [Package mode]
<6>[ 13.875507] [SMD] smd_alloc_channel() 'DATA11' cid=30 size=08192, [Stream mode]
<6>[ 13.927086] [SMD] smd_alloc_channel() 'DATA40' cid=31 size=08192, [Package mode]
<6>[ 13.928490] [SMD] smd_alloc_channel() 'DATA5_CNTL' cid=32 size=01024, [Package mode]
<6>[ 13.931390] [SMD] smd_alloc_channel() 'DATA6_CNTL' cid=33 size=01024, [Package mode]
<6>[ 13.931939] [SMD] smd_alloc_channel() 'DATA7_CNTL' cid=34 size=01024, [Package mode]
<6>[ 13.933312] [SMD] smd_alloc_channel() 'DATA8_CNTL' cid=35 size=01024, [Package mode]
<6>[ 13.934014] [SMD] smd_alloc_channel() 'DATA9_CNTL' cid=36 size=01024, [Package mode]
<6>[ 13.934777] [SMD] smd_alloc_channel() 'DATA12_CNTL' cid=37 size=01024, [Package mode]
<6>[ 13.935754] [SMD] smd_alloc_channel() 'DATA13_CNTL' cid=38 size=01024, [Package mode]
<6>[ 13.936487] [SMD] smd_alloc_channel() 'DATA14_CNTL' cid=39 size=01024, [Package mode]
<4>[ 13.941858] [BAMDMUX] handle_bam_mux_cmd: dropping invalid LCID 10 reserved 0 cmd 4 pad 0 ch 10 len 0
<4>[ 13.941919] [BAMDMUX] handle_bam_mux_cmd: dropping invalid LCID 11 reserved 0 cmd 4 pad 0 ch 11 len 0
<6>[ 13.942652] [SMD] smd_alloc_channel() 'DATA15_CNTL' cid=40 size=01024, [Package mode]
<6>[ 13.943628] [SMD] smd_alloc_channel() 'DATA16_CNTL' cid=41 size=01024, [Package mode]
<6>[ 13.944422] [SMD] smd_alloc_channel() 'DATA40_CNTL' cid=42 size=01024, [Package mode]
<6>[ 13.993895] [SMD] SMD: ch 32 0 -> 1, state: 0
<6>[ 13.993926] [SMD] smd_pkt_open: DATA5_CNTL open success return 0
<6>[ 13.998290] [SMD] SMD: ch 32 1 -> 2, state: 1
<6>[ 14.501693] [SMD] SMD: ch 33 0 -> 1, state: 0
<6>[ 14.501693] [SMD] smd_pkt_open: DATA6_CNTL open success return 0
<6>[ 14.504990] [SMD] SMD: ch 33 1 -> 2, state: 1
<6>[ 14.508286] [SMD] SMD: ch 34 0 -> 1, state: 0
<6>[ 14.508286] [SMD] smd_pkt_open: DATA7_CNTL open success return 0
<6>[ 14.511643] [SMD] SMD: ch 34 1 -> 2, state: 1
<6>[ 14.526445] [SMD] SMD: ch 35 0 -> 1, state: 0
<6>[ 14.526476] [SMD] smd_pkt_open: DATA8_CNTL open success return 0
<6>[ 14.529742] [SMD] SMD: ch 35 1 -> 2, state: 1
<6>[ 14.534228] [SMD] SMD: ch 36 0 -> 1, state: 0
<6>[ 14.534228] [SMD] smd_pkt_open: DATA9_CNTL open success return 0
<6>[ 14.534869] [SMD] SMD: ch 36 1 -> 2, state: 1
<6>[ 14.538257] [SMD] SMD: ch 37 0 -> 1, state: 0
<6>[ 14.538257] [SMD] smd_pkt_open: DATA12_CNTL open success return 0
<6>[ 14.541797] [SMD] SMD: ch 37 1 -> 2, state: 1
<6>[ 14.544758] [SMD] SMD: ch 38 0 -> 1, state: 0
<6>[ 14.544758] [SMD] smd_pkt_open: DATA13_CNTL open success return 0
<6>[ 14.547535] [SMD] SMD: ch 38 1 -> 2, state: 1
<6>[ 14.552418] [SMD] SMD: ch 39 0 -> 1, state: 0
<6>[ 14.552418] [SMD] smd_pkt_open: DATA14_CNTL open success return 0
<6>[ 14.555714] [SMD] SMD: ch 39 1 -> 2, state: 1
<6>[ 14.634213] wcnss_wlan triggered by userspace
<6>[ 16.242148] [AUD] snd_soc_qdsp6: msm_pcm_routing_process_audio: reg 2 val 0 set 1
<6>[ 16.242179] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.242606] [SMD] SMD: ch 14 0 -> 1, state: 0
<6>[ 16.242759] [SMD] SMD: ch 14 1 -> 2, state: 1
<6>[ 16.242759] apr_tal: SMD_EVENT_OPEN
<6>[ 16.277277] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.277277] [AUD] q6asm: q6asm_open_write: change to HTC_POPP_TOPOLOGY
<6>[ 16.317320] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.348023] [SMD] smd_close(apr_audio_svc)+
<6>[ 16.348054] [SMD] smd_close(apr_audio_svc)-
<6>[ 16.348054] [AUD] soc_pcm_close(), set runtume null
<6>[ 16.348084] [AUD] soc_pcm_close(), set runtume null
<6>[ 16.348115] [SMD] SMD: ch 14 2 -> 4, state: 0
<6>[ 16.374210] [AUD] snd_soc_qdsp6: msm_pcm_routing_process_audio: reg 2 val 0 set 0
<6>[ 16.467297] [WCNSS]wcnss_post_bootup: Cancel APPS vote for Iris & Riva
<6>[ 16.467602] [WCNSS]RIVA driver version=1.01
<6>[ 16.590691] mdp4_overlay_req2pipe: pipe=c0d77ec0 ndx=3 num=2 zorder=2 mixer 0 format = b
<6>[ 16.680177] [AUD] snd_soc_qdsp6: msm_pcm_routing_process_audio: reg 2 val 0 set 1
<6>[ 16.680177] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.680482] [SMD] SMD: ch 14 0 -> 1, state: 0
<6>[ 16.683168] [SMD] SMD: ch 14 1 -> 2, state: 1
<6>[ 16.683198] apr_tal: SMD_EVENT_OPEN
<6>[ 16.683229] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.683259] [AUD] q6asm: q6asm_open_write: change to HTC_POPP_TOPOLOGY
<6>[ 16.709964] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.714207] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.714237] [AUD] q6adm: adm_open: Port ID 16384, index 15
<6>[ 16.721654] [AUD] q6adm: adm_matrix_map: session 0x1 path:1 num_copps:1 port_id[0]:16384
<6>[ 16.725499] [AUD] q6adm: send_adm_cal: Audproc cal sent for port id: 16384, path 0
<6>[ 16.725591] [AUD] q6adm: send_adm_cal: Audvol cal not sent for port id: 16384, path 0
<6>[ 16.768838] [AUD] board_elite_audio: msm8960_spkramp_event() name = Ext Spk Bottom Pos, 2
<6>[ 16.768838] [AUD] board_elite_audio: msm8960_spkramp_event() name = Ext Spk Bottom Neg, 2
<6>[ 16.782389] [AUD] snd_soc_qdsp6: msm_dai_q6_trigger:port:16384 cmd:1 dai_data->status_mask = 0
<6>[ 16.782389] [AUD] q6afe: afe_port_start_nowait: 16384 96000
<6>[ 23.792827] [VIB_PWM]pm8xxx_vib_enable vibrate period: 0 msec
<6>[ 23.792827] [VIB_PWM]pm8xxx_vib_set_off
<6>[ 24.055943] [SMD] SMD: ch 8 0 -> 1, state: 0
<6>[ 24.058751] [SMD] SMD: ch 8 1 -> 2, state: 1
<6>[ 24.214405] call alarm, type 0, func alarm_triggered+0x0/0xa0, 1353964110002000000 (s 1353964110002000000)
<6>[ 24.229909] [LED]pm8xxx_led_gpio_set, bank:1, brightness:0
<6>[ 24.230093] [LED]pm8xxx_led_blink_store: bank 1 blink 0
<6>[ 24.230276] [LED]Setting amber off_timer to 0 min 0 sec +
<6>[ 24.230398] [LED]pm8xxx_led_gpio_set, bank:0, brightness:0
<6>[ 24.230550] [LED]pm8xxx_led_blink_store: bank 0 blink 0
<6>[ 24.230734] [LED]Setting green off_timer to 0 min 0 sec +
<6>[ 24.619533] [SMD] smd_close(APPS_RIVA_BT_CMD)+
<6>[ 24.619533] [SMD] smd_close(APPS_RIVA_BT_CMD)-
<6>[ 24.619899] [SMD] SMD: ch 8 2 -> 4, state: 0
<6>[ 24.626186] [SMD] SMD: ch 8 0 -> 1, state: 0
<6>[ 24.626186] [SMD] SMD: ch 9 0 -> 1, state: 0
<6>[ 24.626216] [SMD] SMD: ch 8 1 -> 2, state: 1
<6>[ 24.626216] [BT] hci_smd_notify_event: opening HCI-SMD channel :APPS_RIVA_BT_CMD
<6>[ 24.626247] [SMD] SMD: ch 9 1 -> 2, state: 1
<6>[ 24.626247] [BT] hci_smd_notify_data: opening HCI-SMD channel :APPS_RIVA_BT_ACL
<6>[ 24.823897] acc_open
<6>[ 24.823927] acc_release
<4>[ 24.885212] prima_wlan: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 24.888264] kmemleak: Trying to color unknown object at 0xbf000000 as Grey
<4>[ 24.888295] [<c010dbe4>] (unwind_backtrace+0x0/0x138) from [<c0252140>] (paint_ptr+0x7c/0x1e0)
<4>[ 24.888325] [<c0252140>] (paint_ptr+0x7c/0x1e0) from [<c01d2768>] (load_module+0xbe8/0x22dc)
<4>[ 24.888325] [<c01d2768>] (load_module+0xbe8/0x22dc) from [<c01d3ea0>] (sys_init_module+0x44/0x19c)
<4>[ 24.888356] [<c01d3ea0>] (sys_init_module+0x44/0x19c) from [<c0106aa0>] (ret_fast_syscall+0x0/0x30)
<3>[ 24.930932] init: cannot find '/system/bin/amploader', disabling 'amp_load'
<6>[ 25.243827] prima_wlan: loading driver v3.1.1.14
<6>[ 25.250083] [SMD] SMD: ch 7 0 -> 1, state: 0
<6>[ 25.252922] [SMD] SMD: ch 7 1 -> 2, state: 1
<6>[ 25.253074] [SMD] smsm_change_state b29
<3>[ 25.260216] [0:658:F :HDD] hdd_module_init: WLAN Driver Initialization failed
<3>[ 25.260247] prima_wlan: driver load failure
<6>[ 25.516831] [AUD] q6adm: adm_close port_id=16384 index 15
<6>[ 25.518876] [PM] CPU1: msm_pm_power_collapse: change clock rate (old rate = 0)
<6>[ 25.521593] [AUD] soc_pcm_close(), set runtume null
<6>[ 25.521623] [AUD] q6afe: afe_close: port_id=16384
<6>[ 25.524980] [AUD] snd_soc_qdsp6: msm_dai_q6_shutdown: dai_data->status_mask = 1
<6>[ 25.524980] [AUD] soc_pcm_close(), set runtume null
<6>[ 25.533679] [AUD] board_elite_audio: msm8960_spkramp_event() name = Ext Spk Bottom Pos, 0
<6>[ 25.537738] [AUD] board_elite_audio: msm8960_spkramp_event() name = Ext Spk Bottom Neg, 0
<6>[ 25.546894] [AUD] snd_soc_qdsp6: msm_pcm_routing_process_audio: reg 2 val 0 set 0
<6>[ 26.277704] [VIB_PWM]pm8xxx_vib_enable vibrate period: 0 msec
<6>[ 26.277704] [VIB_PWM]pm8xxx_vib_set_off
<6>[ 26.289485] [VIB_PWM]pm8xxx_vib_enable vibrate period: 1 msec
<6>[ 26.289516] [VIB_PWM]pm8xxx_vib_set_on
<6>[ 26.290523] [VIB_PWM]pm8xxx_vib_timer_func
<6>[ 26.290553] [VIB_PWM]pm8xxx_vib_set_off
<6>[ 26.318083] request_suspend_state: wakeup (3->0) at 26310847387 (2012-11-26 21:08:32.105842616 UTC)
<6>[ 26.321257] [LS][cm3629] lightsensor_open
<6>[ 26.321287] [LS][cm3629] lightsensor_ioctl LIGHTSENSOR_IOCTL_ENABLE, value = 1
<6>[ 26.321287] [PS][cm3629] capella_pl_sensor_lpm_power: leave lmp,OK
<6>[ 26.337311] [LS][cm3629] lightsensor_enable
<6>[ 26.341461] [VIB_PWM]pm8xxx_vib_enable vibrate period: 21 msec
<6>[ 26.341492] [VIB_PWM]pm8xxx_vib_set_on
<6>[ 26.362490] [VIB_PWM]pm8xxx_vib_timer_func
<6>[ 26.362520] [VIB_PWM]pm8xxx_vib_set_off
<6>[ 26.509018] [LS][cm3629] get_ls_adc_value:resume 1
<6>[ 26.509385] [LS][cm3629] get_ls_adc_value: raw adc = 0x13, ls_calibrate = 0
<6>[ 26.509385] [cm3629] set_lsensor_range: low_thd = 0x17, high_thd = 0x159
<6>[ 26.509659] [LS][cm3629] report_lsensor_input_event: ADC=0x04C, Level=3, l_thd = 0x17, h_thd = 0x159
<6>[ 26.539996] [LS][cm3629] get_ls_adc_value: raw adc = 0x13, ls_calibrate = 0
<6>[ 26.540027] [cm3629] set_lsensor_range: low_thd = 0x1, high_thd = 0x16
<6>[ 26.540302] [LS][cm3629] report_lsensor_input_event: ADC=0x013, Level=2, l_thd = 0x1, h_thd = 0x16
<4>[ 26.601861] MPL-accODR: 31250
<7>[ 26.601922] [GSNR][MPU3050][TIMERIRQ]stop_timerirq: data->period = 0, data->run = 0
<7>[ 26.617305] [GSNR][MPU3050][TIMERIRQ]start_timerirq: data->period = 200
<7>[ 26.640317] [GSNR][MPU3050][TIMERIRQ]stop_timerirq: data->period = 200, data->run = 1
<7>[ 26.657439] [GSNR][MPU3050][TIMERIRQ]start_timerirq: data->period = 200
<4>[ 26.657591] MPL-accODR: 31250
<6>[ 26.674561] [LS][cm3629] get_ls_adc_value: raw adc = 0x4D, ls_calibrate = 0
<6>[ 26.674561] [cm3629] set_lsensor_range: low_thd = 0x17, high_thd = 0x159
<6>[ 26.674835] [LS][cm3629] report_lsensor_input_event: ADC=0x04E, Level=3, l_thd = 0x17, h_thd = 0x159
<7>[ 26.734381] [GSNR][MPU3050][TIMERIRQ]stop_timerirq: data->period = 200, data->run = 1
<6>[ 26.775431] [LED]pm8xxx_led_current_set, bank:6, brightness:60
<7>[ 26.775858] [DISP] mipi_dsi_set_backlight+:bl=96
<6>[ 26.775888] [DISP] brightness orig=96, transformed=55
<6>[ 27.351686] [LED]pm8xxx_led_gpio_set, bank:1, brightness:1
<6>[ 27.351960] [LED]pm8xxx_led_blink_store: bank 1 blink 0
<6>[ 27.352174] [LED]Setting amber off_timer to 0 min 0 sec +
<6>[ 27.352266] [LED]pm8xxx_led_gpio_set, bank:0, brightness:0
<6>[ 27.352418] [LED]pm8xxx_led_blink_store: bank 0 blink 0
<6>[ 27.352601] [LED]Setting green off_timer to 0 min 0 sec +
<6>[ 27.377384] [USBDIAG] diagchar_open:LocationManager(parent:zygote): tgid=492
<6>[ 28.100839] call alarm, type 1, func alarm_triggered+0x0/0xa0, 1353909600888000000 (s 1353909600888000000)
<6>[ 28.107187] call alarm, type 1, func alarm_triggered+0x0/0xa0, 1353909600888000000 (s 1353909600888000000)
<4>[ 29.016419] prima_wlan: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 29.045627] kmemleak: Trying to color unknown object at 0xbf000000 as Grey
<4>[ 29.045658] [<c010dbe4>] (unwind_backtrace+0x0/0x138) from [<c0252140>] (paint_ptr+0x7c/0x1e0)
<4>[ 29.045658] [<c0252140>] (paint_ptr+0x7c/0x1e0) from [<c01d2768>] (load_module+0xbe8/0x22dc)
<4>[ 29.045688] [<c01d2768>] (load_module+0xbe8/0x22dc) from [<c01d3ea0>] (sys_init_module+0x44/0x19c)
<4>[ 29.045688] [<c01d3ea0>] (sys_init_module+0x44/0x19c) from [<c0106aa0>] (ret_fast_syscall+0x0/0x30)
<6>[ 29.833816] prima_wlan: loading driver v3.1.1.14
<3>[ 29.894033] [1:966:E :CTL] WCTS_OpenTransport: smd_named_open_on_edge failed with status -19
<2>[ 29.894063] [1:966:F :CTL] WDI_Init: Failed to open WCTS transport
<3>[ 29.894124] [1:966:E :WDA] WDI Init failed
<3>[ 29.894124] [1:966:F :VOS] vos_open: Failed to open WDA module
<2>[ 29.894124] VOS ASSERT in vos_open Line 370
<4>[ 29.894124] ------------[ cut here ]------------
<4>[ 29.894613] WARNING: at drivers/staging/prima/CORE/VOSS/src/vos_api.c:370 vos_open+0x30c/0x64c [prima_wlan]()
<4>[ 29.894613] Modules linked in: prima_wlan(C+)
<4>[ 29.894643] [<c010dbe4>] (unwind_backtrace+0x0/0x138) from [<c0193f88>] (warn_slowpath_common+0x50/0x11c)
<4>[ 29.894674] [<c0193f88>] (warn_slowpath_common+0x50/0x11c) from [<c0194070>] (warn_slowpath_null+0x1c/0x24)
<4>[ 29.894857] [<c0194070>] (warn_slowpath_null+0x1c/0x24) from [<bf008838>] (vos_open+0x30c/0x64c [prima_wlan])
<4>[ 29.895345] [<bf008838>] (vos_open+0x30c/0x64c [prima_wlan]) from [<bf0dc364>] (hdd_wlan_startup+0x300/0xb44 [prima_wlan])
<4>[ 29.895803] [<bf0dc364>] (hdd_wlan_startup+0x300/0xb44 [prima_wlan]) from [<bf2410e4>] (hdd_module_init+0xe4/0x238 [prima_wlan])
<4>[ 29.895986] [<bf2410e4>] (hdd_module_init+0xe4/0x238 [prima_wlan]) from [<c0100568>] (do_one_initcall+0x34/0x174)
<4>[ 29.896017] [<c0100568>] (do_one_initcall+0x34/0x174) from [<c01d3ed0>] (sys_init_module+0x74/0x19c)
<4>[ 29.896047] [<c01d3ed0>] (sys_init_module+0x74/0x19c) from [<c0106aa0>] (ret_fast_syscall+0x0/0x30)
<4>[ 29.896047] ---[ end trace da227214a82491c0 ]---
<3>[ 29.896200] [1:966:F :HDD] hdd_wlan_startup: vos_open failed
<3>[ 29.937494] [1:966:F :HDD] hdd_module_init: WLAN Driver Initialization failed
<3>[ 29.937524] prima_wlan: driver load failure
this part jumped out to my eyes
Code:
<4>[ 24.885212] prima_wlan: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 24.888264] kmemleak: Trying to color unknown object at 0xbf000000 as Grey
<4>[ 24.888295] [<c010dbe4>] (unwind_backtrace+0x0/0x138) from [<c0252140>] (paint_ptr+0x7c/0x1e0)
<4>[ 24.888325] [<c0252140>] (paint_ptr+0x7c/0x1e0) from [<c01d2768>] (load_module+0xbe8/0x22dc)
<4>[ 24.888325] [<c01d2768>] (load_module+0xbe8/0x22dc) from [<c01d3ea0>] (sys_init_module+0x44/0x19c)
<4>[ 24.888356] [<c01d3ea0>] (sys_init_module+0x44/0x19c) from [<c0106aa0>] (ret_fast_syscall+0x0/0x30)
<3>[ 24.930932] init: cannot find '/system/bin/amploader', disabling 'amp_load'
also now data is broken
Zarboz said:
as per your suggestion i downgraded to the 3.1.1.14 drivers and made the couple mods you have in your git to allow loading
as well as insecure pl_riva
Code:
13.572501] wcnss_wlan triggered by userspace
<6>[ 13.610987] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.610987] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.611017] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.614771] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.614802] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.614802] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.688844] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.688875] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.688875] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.697909] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.697909] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.697939] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.747352] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.747352] [USBDIAG] diagchar_ioctl:kworker/u:3(parent:kthreadd): tgid=109
<6>[ 13.747382] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.759774] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.759774] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.759804] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.759804] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.814497] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.814497] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.814558] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.814558] [USBDIAG] diagchar_ioctl:kworker/u:1(parent:kthreadd): tgid=61
<6>[ 13.814558] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.841904] [USBDIAG] diag_smd_cntl_send_req: MODEM_PROC
<6>[ 13.841904] [USBDIAG] diagchar_ioctl:kworker/u:3(parent:kthreadd): tgid=109
<6>[ 13.841934] [USBDIAG] diagchar_ioctl:kworker/u:3(parent:kthreadd): tgid=109
<6>[ 13.841934] diag: incomplete pkt on Modem CNTL ch
<6>[ 13.871661] [SMD] smd_alloc_channel() 'DS' cid=0 size=08192, [Stream mode]
<6>[ 13.872791] [SMD] smd_alloc_channel() 'DATA1' cid=26 size=08192, [Package mode]
<6>[ 13.873432] [SMD] smd_alloc_channel() 'DATA2' cid=27 size=08192, [Package mode]
<6>[ 13.874133] [SMD] smd_alloc_channel() 'DATA3' cid=28 size=08192, [Package mode]
<6>[ 13.874866] [SMD] smd_alloc_channel() 'DATA4' cid=29 size=08192, [Package mode]
<6>[ 13.875507] [SMD] smd_alloc_channel() 'DATA11' cid=30 size=08192, [Stream mode]
<6>[ 13.927086] [SMD] smd_alloc_channel() 'DATA40' cid=31 size=08192, [Package mode]
<6>[ 13.928490] [SMD] smd_alloc_channel() 'DATA5_CNTL' cid=32 size=01024, [Package mode]
<6>[ 13.931390] [SMD] smd_alloc_channel() 'DATA6_CNTL' cid=33 size=01024, [Package mode]
<6>[ 13.931939] [SMD] smd_alloc_channel() 'DATA7_CNTL' cid=34 size=01024, [Package mode]
<6>[ 13.933312] [SMD] smd_alloc_channel() 'DATA8_CNTL' cid=35 size=01024, [Package mode]
<6>[ 13.934014] [SMD] smd_alloc_channel() 'DATA9_CNTL' cid=36 size=01024, [Package mode]
<6>[ 13.934777] [SMD] smd_alloc_channel() 'DATA12_CNTL' cid=37 size=01024, [Package mode]
<6>[ 13.935754] [SMD] smd_alloc_channel() 'DATA13_CNTL' cid=38 size=01024, [Package mode]
<6>[ 13.936487] [SMD] smd_alloc_channel() 'DATA14_CNTL' cid=39 size=01024, [Package mode]
<4>[ 13.941858] [BAMDMUX] handle_bam_mux_cmd: dropping invalid LCID 10 reserved 0 cmd 4 pad 0 ch 10 len 0
<4>[ 13.941919] [BAMDMUX] handle_bam_mux_cmd: dropping invalid LCID 11 reserved 0 cmd 4 pad 0 ch 11 len 0
<6>[ 13.942652] [SMD] smd_alloc_channel() 'DATA15_CNTL' cid=40 size=01024, [Package mode]
<6>[ 13.943628] [SMD] smd_alloc_channel() 'DATA16_CNTL' cid=41 size=01024, [Package mode]
<6>[ 13.944422] [SMD] smd_alloc_channel() 'DATA40_CNTL' cid=42 size=01024, [Package mode]
<6>[ 13.993895] [SMD] SMD: ch 32 0 -> 1, state: 0
<6>[ 13.993926] [SMD] smd_pkt_open: DATA5_CNTL open success return 0
<6>[ 13.998290] [SMD] SMD: ch 32 1 -> 2, state: 1
<6>[ 14.501693] [SMD] SMD: ch 33 0 -> 1, state: 0
<6>[ 14.501693] [SMD] smd_pkt_open: DATA6_CNTL open success return 0
<6>[ 14.504990] [SMD] SMD: ch 33 1 -> 2, state: 1
<6>[ 14.508286] [SMD] SMD: ch 34 0 -> 1, state: 0
<6>[ 14.508286] [SMD] smd_pkt_open: DATA7_CNTL open success return 0
<6>[ 14.511643] [SMD] SMD: ch 34 1 -> 2, state: 1
<6>[ 14.526445] [SMD] SMD: ch 35 0 -> 1, state: 0
<6>[ 14.526476] [SMD] smd_pkt_open: DATA8_CNTL open success return 0
<6>[ 14.529742] [SMD] SMD: ch 35 1 -> 2, state: 1
<6>[ 14.534228] [SMD] SMD: ch 36 0 -> 1, state: 0
<6>[ 14.534228] [SMD] smd_pkt_open: DATA9_CNTL open success return 0
<6>[ 14.534869] [SMD] SMD: ch 36 1 -> 2, state: 1
<6>[ 14.538257] [SMD] SMD: ch 37 0 -> 1, state: 0
<6>[ 14.538257] [SMD] smd_pkt_open: DATA12_CNTL open success return 0
<6>[ 14.541797] [SMD] SMD: ch 37 1 -> 2, state: 1
<6>[ 14.544758] [SMD] SMD: ch 38 0 -> 1, state: 0
<6>[ 14.544758] [SMD] smd_pkt_open: DATA13_CNTL open success return 0
<6>[ 14.547535] [SMD] SMD: ch 38 1 -> 2, state: 1
<6>[ 14.552418] [SMD] SMD: ch 39 0 -> 1, state: 0
<6>[ 14.552418] [SMD] smd_pkt_open: DATA14_CNTL open success return 0
<6>[ 14.555714] [SMD] SMD: ch 39 1 -> 2, state: 1
<6>[ 14.634213] wcnss_wlan triggered by userspace
<6>[ 16.242148] [AUD] snd_soc_qdsp6: msm_pcm_routing_process_audio: reg 2 val 0 set 1
<6>[ 16.242179] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.242606] [SMD] SMD: ch 14 0 -> 1, state: 0
<6>[ 16.242759] [SMD] SMD: ch 14 1 -> 2, state: 1
<6>[ 16.242759] apr_tal: SMD_EVENT_OPEN
<6>[ 16.277277] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.277277] [AUD] q6asm: q6asm_open_write: change to HTC_POPP_TOPOLOGY
<6>[ 16.317320] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.348023] [SMD] smd_close(apr_audio_svc)+
<6>[ 16.348054] [SMD] smd_close(apr_audio_svc)-
<6>[ 16.348054] [AUD] soc_pcm_close(), set runtume null
<6>[ 16.348084] [AUD] soc_pcm_close(), set runtume null
<6>[ 16.348115] [SMD] SMD: ch 14 2 -> 4, state: 0
<6>[ 16.374210] [AUD] snd_soc_qdsp6: msm_pcm_routing_process_audio: reg 2 val 0 set 0
<6>[ 16.467297] [WCNSS]wcnss_post_bootup: Cancel APPS vote for Iris & Riva
<6>[ 16.467602] [WCNSS]RIVA driver version=1.01
<6>[ 16.590691] mdp4_overlay_req2pipe: pipe=c0d77ec0 ndx=3 num=2 zorder=2 mixer 0 format = b
<6>[ 16.680177] [AUD] snd_soc_qdsp6: msm_pcm_routing_process_audio: reg 2 val 0 set 1
<6>[ 16.680177] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.680482] [SMD] SMD: ch 14 0 -> 1, state: 0
<6>[ 16.683168] [SMD] SMD: ch 14 1 -> 2, state: 1
<6>[ 16.683198] apr_tal: SMD_EVENT_OPEN
<6>[ 16.683229] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.683259] [AUD] q6asm: q6asm_open_write: change to HTC_POPP_TOPOLOGY
<6>[ 16.709964] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.714207] [AUD] board_elite_audio: elite_get_q6_effect_mode: mode 0
<6>[ 16.714237] [AUD] q6adm: adm_open: Port ID 16384, index 15
<6>[ 16.721654] [AUD] q6adm: adm_matrix_map: session 0x1 path:1 num_copps:1 port_id[0]:16384
<6>[ 16.725499] [AUD] q6adm: send_adm_cal: Audproc cal sent for port id: 16384, path 0
<6>[ 16.725591] [AUD] q6adm: send_adm_cal: Audvol cal not sent for port id: 16384, path 0
<6>[ 16.768838] [AUD] board_elite_audio: msm8960_spkramp_event() name = Ext Spk Bottom Pos, 2
<6>[ 16.768838] [AUD] board_elite_audio: msm8960_spkramp_event() name = Ext Spk Bottom Neg, 2
<6>[ 16.782389] [AUD] snd_soc_qdsp6: msm_dai_q6_trigger:port:16384 cmd:1 dai_data->status_mask = 0
<6>[ 16.782389] [AUD] q6afe: afe_port_start_nowait: 16384 96000
<6>[ 23.792827] [VIB_PWM]pm8xxx_vib_enable vibrate period: 0 msec
<6>[ 23.792827] [VIB_PWM]pm8xxx_vib_set_off
<6>[ 24.055943] [SMD] SMD: ch 8 0 -> 1, state: 0
<6>[ 24.058751] [SMD] SMD: ch 8 1 -> 2, state: 1
<6>[ 24.214405] call alarm, type 0, func alarm_triggered+0x0/0xa0, 1353964110002000000 (s 1353964110002000000)
<6>[ 24.229909] [LED]pm8xxx_led_gpio_set, bank:1, brightness:0
<6>[ 24.230093] [LED]pm8xxx_led_blink_store: bank 1 blink 0
<6>[ 24.230276] [LED]Setting amber off_timer to 0 min 0 sec +
<6>[ 24.230398] [LED]pm8xxx_led_gpio_set, bank:0, brightness:0
<6>[ 24.230550] [LED]pm8xxx_led_blink_store: bank 0 blink 0
<6>[ 24.230734] [LED]Setting green off_timer to 0 min 0 sec +
<6>[ 24.619533] [SMD] smd_close(APPS_RIVA_BT_CMD)+
<6>[ 24.619533] [SMD] smd_close(APPS_RIVA_BT_CMD)-
<6>[ 24.619899] [SMD] SMD: ch 8 2 -> 4, state: 0
<6>[ 24.626186] [SMD] SMD: ch 8 0 -> 1, state: 0
<6>[ 24.626186] [SMD] SMD: ch 9 0 -> 1, state: 0
<6>[ 24.626216] [SMD] SMD: ch 8 1 -> 2, state: 1
<6>[ 24.626216] [BT] hci_smd_notify_event: opening HCI-SMD channel :APPS_RIVA_BT_CMD
<6>[ 24.626247] [SMD] SMD: ch 9 1 -> 2, state: 1
<6>[ 24.626247] [BT] hci_smd_notify_data: opening HCI-SMD channel :APPS_RIVA_BT_ACL
<6>[ 24.823897] acc_open
<6>[ 24.823927] acc_release
<4>[ 24.885212] prima_wlan: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 24.888264] kmemleak: Trying to color unknown object at 0xbf000000 as Grey
<4>[ 24.888295] [<c010dbe4>] (unwind_backtrace+0x0/0x138) from [<c0252140>] (paint_ptr+0x7c/0x1e0)
<4>[ 24.888325] [<c0252140>] (paint_ptr+0x7c/0x1e0) from [<c01d2768>] (load_module+0xbe8/0x22dc)
<4>[ 24.888325] [<c01d2768>] (load_module+0xbe8/0x22dc) from [<c01d3ea0>] (sys_init_module+0x44/0x19c)
<4>[ 24.888356] [<c01d3ea0>] (sys_init_module+0x44/0x19c) from [<c0106aa0>] (ret_fast_syscall+0x0/0x30)
<3>[ 24.930932] init: cannot find '/system/bin/amploader', disabling 'amp_load'
<6>[ 25.243827] prima_wlan: loading driver v3.1.1.14
<6>[ 25.250083] [SMD] SMD: ch 7 0 -> 1, state: 0
<6>[ 25.252922] [SMD] SMD: ch 7 1 -> 2, state: 1
<6>[ 25.253074] [SMD] smsm_change_state b29
<3>[ 25.260216] [0:658:F :HDD] hdd_module_init: WLAN Driver Initialization failed
<3>[ 25.260247] prima_wlan: driver load failure
<6>[ 25.516831] [AUD] q6adm: adm_close port_id=16384 index 15
<6>[ 25.518876] [PM] CPU1: msm_pm_power_collapse: change clock rate (old rate = 0)
<6>[ 25.521593] [AUD] soc_pcm_close(), set runtume null
<6>[ 25.521623] [AUD] q6afe: afe_close: port_id=16384
<6>[ 25.524980] [AUD] snd_soc_qdsp6: msm_dai_q6_shutdown: dai_data->status_mask = 1
<6>[ 25.524980] [AUD] soc_pcm_close(), set runtume null
<6>[ 25.533679] [AUD] board_elite_audio: msm8960_spkramp_event() name = Ext Spk Bottom Pos, 0
<6>[ 25.537738] [AUD] board_elite_audio: msm8960_spkramp_event() name = Ext Spk Bottom Neg, 0
<6>[ 25.546894] [AUD] snd_soc_qdsp6: msm_pcm_routing_process_audio: reg 2 val 0 set 0
<6>[ 26.277704] [VIB_PWM]pm8xxx_vib_enable vibrate period: 0 msec
<6>[ 26.277704] [VIB_PWM]pm8xxx_vib_set_off
<6>[ 26.289485] [VIB_PWM]pm8xxx_vib_enable vibrate period: 1 msec
<6>[ 26.289516] [VIB_PWM]pm8xxx_vib_set_on
<6>[ 26.290523] [VIB_PWM]pm8xxx_vib_timer_func
<6>[ 26.290553] [VIB_PWM]pm8xxx_vib_set_off
<6>[ 26.318083] request_suspend_state: wakeup (3->0) at 26310847387 (2012-11-26 21:08:32.105842616 UTC)
<6>[ 26.321257] [LS][cm3629] lightsensor_open
<6>[ 26.321287] [LS][cm3629] lightsensor_ioctl LIGHTSENSOR_IOCTL_ENABLE, value = 1
<6>[ 26.321287] [PS][cm3629] capella_pl_sensor_lpm_power: leave lmp,OK
<6>[ 26.337311] [LS][cm3629] lightsensor_enable
<6>[ 26.341461] [VIB_PWM]pm8xxx_vib_enable vibrate period: 21 msec
<6>[ 26.341492] [VIB_PWM]pm8xxx_vib_set_on
<6>[ 26.362490] [VIB_PWM]pm8xxx_vib_timer_func
<6>[ 26.362520] [VIB_PWM]pm8xxx_vib_set_off
<6>[ 26.509018] [LS][cm3629] get_ls_adc_value:resume 1
<6>[ 26.509385] [LS][cm3629] get_ls_adc_value: raw adc = 0x13, ls_calibrate = 0
<6>[ 26.509385] [cm3629] set_lsensor_range: low_thd = 0x17, high_thd = 0x159
<6>[ 26.509659] [LS][cm3629] report_lsensor_input_event: ADC=0x04C, Level=3, l_thd = 0x17, h_thd = 0x159
<6>[ 26.539996] [LS][cm3629] get_ls_adc_value: raw adc = 0x13, ls_calibrate = 0
<6>[ 26.540027] [cm3629] set_lsensor_range: low_thd = 0x1, high_thd = 0x16
<6>[ 26.540302] [LS][cm3629] report_lsensor_input_event: ADC=0x013, Level=2, l_thd = 0x1, h_thd = 0x16
<4>[ 26.601861] MPL-accODR: 31250
<7>[ 26.601922] [GSNR][MPU3050][TIMERIRQ]stop_timerirq: data->period = 0, data->run = 0
<7>[ 26.617305] [GSNR][MPU3050][TIMERIRQ]start_timerirq: data->period = 200
<7>[ 26.640317] [GSNR][MPU3050][TIMERIRQ]stop_timerirq: data->period = 200, data->run = 1
<7>[ 26.657439] [GSNR][MPU3050][TIMERIRQ]start_timerirq: data->period = 200
<4>[ 26.657591] MPL-accODR: 31250
<6>[ 26.674561] [LS][cm3629] get_ls_adc_value: raw adc = 0x4D, ls_calibrate = 0
<6>[ 26.674561] [cm3629] set_lsensor_range: low_thd = 0x17, high_thd = 0x159
<6>[ 26.674835] [LS][cm3629] report_lsensor_input_event: ADC=0x04E, Level=3, l_thd = 0x17, h_thd = 0x159
<7>[ 26.734381] [GSNR][MPU3050][TIMERIRQ]stop_timerirq: data->period = 200, data->run = 1
<6>[ 26.775431] [LED]pm8xxx_led_current_set, bank:6, brightness:60
<7>[ 26.775858] [DISP] mipi_dsi_set_backlight+:bl=96
<6>[ 26.775888] [DISP] brightness orig=96, transformed=55
<6>[ 27.351686] [LED]pm8xxx_led_gpio_set, bank:1, brightness:1
<6>[ 27.351960] [LED]pm8xxx_led_blink_store: bank 1 blink 0
<6>[ 27.352174] [LED]Setting amber off_timer to 0 min 0 sec +
<6>[ 27.352266] [LED]pm8xxx_led_gpio_set, bank:0, brightness:0
<6>[ 27.352418] [LED]pm8xxx_led_blink_store: bank 0 blink 0
<6>[ 27.352601] [LED]Setting green off_timer to 0 min 0 sec +
<6>[ 27.377384] [USBDIAG] diagchar_open:LocationManager(parent:zygote): tgid=492
<6>[ 28.100839] call alarm, type 1, func alarm_triggered+0x0/0xa0, 1353909600888000000 (s 1353909600888000000)
<6>[ 28.107187] call alarm, type 1, func alarm_triggered+0x0/0xa0, 1353909600888000000 (s 1353909600888000000)
<4>[ 29.016419] prima_wlan: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 29.045627] kmemleak: Trying to color unknown object at 0xbf000000 as Grey
<4>[ 29.045658] [<c010dbe4>] (unwind_backtrace+0x0/0x138) from [<c0252140>] (paint_ptr+0x7c/0x1e0)
<4>[ 29.045658] [<c0252140>] (paint_ptr+0x7c/0x1e0) from [<c01d2768>] (load_module+0xbe8/0x22dc)
<4>[ 29.045688] [<c01d2768>] (load_module+0xbe8/0x22dc) from [<c01d3ea0>] (sys_init_module+0x44/0x19c)
<4>[ 29.045688] [<c01d3ea0>] (sys_init_module+0x44/0x19c) from [<c0106aa0>] (ret_fast_syscall+0x0/0x30)
<6>[ 29.833816] prima_wlan: loading driver v3.1.1.14
<3>[ 29.894033] [1:966:E :CTL] WCTS_OpenTransport: smd_named_open_on_edge failed with status -19
<2>[ 29.894063] [1:966:F :CTL] WDI_Init: Failed to open WCTS transport
<3>[ 29.894124] [1:966:E :WDA] WDI Init failed
<3>[ 29.894124] [1:966:F :VOS] vos_open: Failed to open WDA module
<2>[ 29.894124] VOS ASSERT in vos_open Line 370
<4>[ 29.894124] ------------[ cut here ]------------
<4>[ 29.894613] WARNING: at drivers/staging/prima/CORE/VOSS/src/vos_api.c:370 vos_open+0x30c/0x64c [prima_wlan]()
<4>[ 29.894613] Modules linked in: prima_wlan(C+)
<4>[ 29.894643] [<c010dbe4>] (unwind_backtrace+0x0/0x138) from [<c0193f88>] (warn_slowpath_common+0x50/0x11c)
<4>[ 29.894674] [<c0193f88>] (warn_slowpath_common+0x50/0x11c) from [<c0194070>] (warn_slowpath_null+0x1c/0x24)
<4>[ 29.894857] [<c0194070>] (warn_slowpath_null+0x1c/0x24) from [<bf008838>] (vos_open+0x30c/0x64c [prima_wlan])
<4>[ 29.895345] [<bf008838>] (vos_open+0x30c/0x64c [prima_wlan]) from [<bf0dc364>] (hdd_wlan_startup+0x300/0xb44 [prima_wlan])
<4>[ 29.895803] [<bf0dc364>] (hdd_wlan_startup+0x300/0xb44 [prima_wlan]) from [<bf2410e4>] (hdd_module_init+0xe4/0x238 [prima_wlan])
<4>[ 29.895986] [<bf2410e4>] (hdd_module_init+0xe4/0x238 [prima_wlan]) from [<c0100568>] (do_one_initcall+0x34/0x174)
<4>[ 29.896017] [<c0100568>] (do_one_initcall+0x34/0x174) from [<c01d3ed0>] (sys_init_module+0x74/0x19c)
<4>[ 29.896047] [<c01d3ed0>] (sys_init_module+0x74/0x19c) from [<c0106aa0>] (ret_fast_syscall+0x0/0x30)
<4>[ 29.896047] ---[ end trace da227214a82491c0 ]---
<3>[ 29.896200] [1:966:F :HDD] hdd_wlan_startup: vos_open failed
<3>[ 29.937494] [1:966:F :HDD] hdd_module_init: WLAN Driver Initialization failed
<3>[ 29.937524] prima_wlan: driver load failure
this part jumped out to my eyes
Code:
<4>[ 24.885212] prima_wlan: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 24.888264] kmemleak: Trying to color unknown object at 0xbf000000 as Grey
<4>[ 24.888295] [<c010dbe4>] (unwind_backtrace+0x0/0x138) from [<c0252140>] (paint_ptr+0x7c/0x1e0)
<4>[ 24.888325] [<c0252140>] (paint_ptr+0x7c/0x1e0) from [<c01d2768>] (load_module+0xbe8/0x22dc)
<4>[ 24.888325] [<c01d2768>] (load_module+0xbe8/0x22dc) from [<c01d3ea0>] (sys_init_module+0x44/0x19c)
<4>[ 24.888356] [<c01d3ea0>] (sys_init_module+0x44/0x19c) from [<c0106aa0>] (ret_fast_syscall+0x0/0x30)
<3>[ 24.930932] init: cannot find '/system/bin/amploader', disabling 'amp_load'
also now data is broken
Click to expand...
Click to collapse
get your stock .ko and run a strings, try to find the version inside it.
Then you can search in caf for the right version.
You will need to enable the debug in prima driver, include the BUILD_DEBUG_VERSION in Makefile
Hello
SKotreboval by som apoň originál firmware z vašich tabletov kto má tento. Na stránkach MyAudio
EN: I need original Firmware(ROM) from this tablet. On product website
Code:
ht tp:// slovensky. myaudioworld. com/mysupport/firmware/series-1016-dcc/
SK:som nasiel nejake "firmware" ktoré sú vo forme 5001.img a 5002.img avšak zverejnený oficiálny návod nefunguje (vám fungoval? ako ste postupovali?)
EN: i find some Firmware, but they are as 5001.img - but official instructions for use is bad ( was good for you? sa me how to pls)
SK:nejakým spôsobom som moj odpalil a nepomaha ani recovery.(trochu som sa hral a nemal som zalohu)
EN: I damaged original fimware(ROM), and recovery is not functional (I have no backup)
SKrípadne ak sa niekto hral s firmware a má nejaký funkčný inštalovateľný z SD a pod.....
EN: If someone has good firmware(ROM) fully functional, instalable from SD an so on. send me please.
SK:Možno by mi pomohol jednoduchý príkaz cez terminál
EN: Maybe will help command from terminal
Code:
ht tps:// docs .google. com/file/d/0BxgPttaVjg4gdklzN0tINlRCZWs/edit?usp=sharing
SK: a poslat mi komplet čo vypísal
EN: send me please what it show
Code:
dmesg
SK: Neni treba root.
EN: Root is not needed
SK: Ak chete root :
EN: If you want root:
Code:
ht tps:// docs. google. com/file/d/0BxgPttaVjg4gdl83TFdCb0h4WWc/edit?usp=sharing
SK: Ak ho máte rootnutý tak skusiť
EN: If you have it rooted please try
ROM DUMP
Code:
htt ps:// docs. google. com/file/d/0BxgPttaVjg4gVV9nLUNnWmtDMVk/edit?usp=sharing
SK: a poslať mi vzniknutý priečinok.
EN: and send me created output folder
SK: A teraz dôvod prečo to potrebujem
Vadil mi na tablete gtalk tak som ho zmazal a spôsobilo to že už som na nom nenaštartoval system.
tak som hladal nejaku možnosť preinštalovania nakolko mi ani recovery nepomohol.
Vyskúšal som tieto Firmware alebo ROm či jak to nazvať
EN: Why i need it?
I delete Gtalk and android crashed
I try those Firmawares(ROMs) :
Code:
ht tps:// docs. google. com/file/d/0BxgPttaVjg4gSnBsNjBScnZ5X0k/edit?usp=sharing
https://docs. google. com/file/d/0BxgPttaVjg4gZEdjTjJYQUJTT1k/edit?usp=sharing
SK:systém nabehol
dokonca aj android jelly bean
ale nefunguje dotykovka... nejak zlý ovládač alebo zle zdetekovanie.
EN: System is going, (jelly bean too) , BUT touch screen is not functional, bad driver or bad detected.
SK:Z mojho dmesg je zjavne že dotykovka proste nenabehne.. preto by možno stačil aj dmesg výpis a skúsil by som nastaviť tu inštalačku ROm tak aby nainštaloval správny ovládač.. ale neviem sa pohnúť. ak je niekto viac znalý v problematike tak prosím help.
moj dmesg vypíše:
EN: From my dmesg we see that touch screen has problems. Is there someone who can help what to do? maybe edit tryed ROMs will help.
My dmesg:
<1>[ 5.492059] wmt.sd2.param = 0:0
<1>[ 5.495873] Default wmt.sd3.param = 0:0
<1>[ 5.500390] do not have set uboot enviroment: wmt.init.rc
<7>[ 5.505914] Registered led device: lcd-backlight
<6>[ 5.510061] usbcore: registered new interface driver usbhid
<6>[ 5.515545] usbhid: USB HID core driver
<6>[ 5.520424] log enable:FF, setting:FF
<6>[ 5.524161] logger: created 256K log 'log_main'
<6>[ 5.528718] logger: created 256K log 'log_events'
<6>[ 5.533440] logger: created 64K log 'log_radio'
<6>[ 5.538052] GPS: mt3326_gps_power: Switching GPS device on
<6>[ 5.543461] GPS: mt3326_gps_power: ignore power control: 1
<6>[ 5.548913] GPS: mt3326_gps_probe: Registering chardev
<6>[ 5.554118] GPS: mt3326_gps_probe: major: 246, minor: 0
<6>[ 5.559465] GPS: mt3326_gps_probe: Done
<6>[ 5.563251] BTHWCTL: alloc bthwctl: 245:0
<6>[ 5.567733] BTHWCTL: Bluetooth hardware control driver initialized
<6>[ 5.574718] usbcore: registered new interface driver snd-usb-audio
<6>[ 5.588430] WMT_SOC: dai_name=i2s, codec_name=vt1603
<4>[ 5.596553] wmt_pdm_init: pcm_clk_src=73500
<4>[ 5.596559]
<6>[ 5.602926] VT1602: vt1602 string not found
<6>[ 5.607548] wmt.audio.i2s = vt1603:0
<6>[ 5.615507] WMT_SOC: create WMT-HWDEP 0 success
<6>[ 5.619993] mount_thread
<6>[ 5.625106] asoc: VT1603 <-> wmt-i2s.0 mapping ok
<4>[ 5.690401] buf_area = ffde0000, buf_addr = 32810000buf_area = ffd3c000, b
uf_addr = 32814000
<6>[ 5.698569] asoc: HWDAC <-> wmt-pdm.0 mapping ok
<6>[ 5.705486] ALSA device list:
<6>[ 5.708381] #0: WMT_SOC
<4>[ 5.711731] default disable oprofile
<6>[ 5.715477] nf_conntrack version 0.5.0 (12987 buckets, 51948 max)
<6>[ 5.723649] NF_TPROXY: Transparent proxy support initialized, version 4.1.
0
<6>[ 5.730528] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 5.737621] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 5.742955] TCP cubic registered
<6>[ 5.746714] NET: Registered protocol family 10
<6>[ 5.751925] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 5.757353] IPv6 over IPv4 tunneling driver
<6>[ 5.761834] NET: Registered protocol family 17
<6>[ 5.766607] NET: Registered protocol family 15
<6>[ 5.771622] Bluetooth: RFCOMM TTY layer initialized
<6>[ 5.778068] Bluetooth: RFCOMM socket layer initialized
<6>[ 5.783324] Bluetooth: RFCOMM ver 1.11
<6>[ 5.786987] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 5.792273] Bluetooth: BNEP filters: protocol multicast
<6>[ 5.797472] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 5.805831] L2TP core driver, V2.0
<6>[ 5.809370] PPPoL2TP kernel driver, V2.0
<6>[ 5.813204] L2TP IP encapsulation support (L2TPv3)
<6>[ 5.818205] L2TP netlink interface
<6>[ 5.821558] L2TP ethernet pseudowire support (L2TPv3)
<6>[ 5.828702] L2TP debugfs support
<6>[ 5.832419] lib80211: common routines for IEEE802.11 drivers
<7>[ 5.838542] lib80211_crypt: registered algorithm 'NULL'
<6>[ 5.838552] VFP support v0.3: implementor 41 architecture 3 part 30 varian
t 9 rev 3
<6>[ 5.847145] ThumbEE CPU extension supported.
<5>[ 5.851866] Registering SWP/SWPB emulation handler
<6>[ 5.858031] input: kpadPower as /devices/virtual/input/input0
<4>[ 5.865118] [wmt_pm_init] id = 0x0, act = 0x1, bitmap = 0x6, ctl = 0xfe110
042, oc = 0xfe110082, od = 0xfe1100c2
<4>[ 5.875889] [wmt_pm_init] var define var_wake_en=1 var_wake_param=408001
<4>[ 5.882677] [wmt_pm_init] battery_used = 3
<6>[ 5.887464] PMC: WonderMedia Power Management driver
<4>[ 5.892537] PMC: Power button is configured as soft power
<4>[ 5.898238] [wmt_pm_init] power_on = 100 resume = 100 power_up = 100
<6>[ 5.905367] Can not find uboot env wmt.misc.param
<4>[ 5.910110] SD0 Host Clock 382812Hz
<6>[ 5.914246] Mali DRM initialize, driver name: mali_drm, version 2.1
<6>[ 5.920710] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
<4>[ 5.927980] Vt1609 touchscreen driver disabled.
<6>[ 5.934359] wmt-rtc wmt-rtc.0: setting system clock to 2013-03-06 13:51:31
UTC (1362577891)
<6>[ 5.943968] Freeing init memory: 180K
<4>[ 5.951254] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oo
m_score_adj instead.
<6>[ 6.043877] yaffs: dev is 32505866 name is "mtdblock10" rw
<6>[ 6.049288] yaffs: passed flags ""
<7>[ 6.052655] yaffs: yaffs: Attempting MTD mount of 31.10,"mtdblock10"
<7>[ 6.120439] yaffs: yaffs_read_super: is_checkpointed 1
<6>[ 6.120743] yaffs: dev is 32505868 name is "mtdblock12" rw
<6>[ 6.126153] yaffs: passed flags ""
<7>[ 6.129521] yaffs: yaffs: Attempting MTD mount of 31.12,"mtdblock12"
<7>[ 6.213933] yaffs: block 191 is bad
<7>[ 6.763771] yaffs: yaffs_read_super: is_checkpointed 0
<6>[ 6.763954] yaffs: dev is 32505867 name is "mtdblock11" rw
<6>[ 6.769369] yaffs: passed flags ""
<7>[ 6.772737] yaffs: yaffs: Attempting MTD mount of 31.11,"mtdblock11"
<7>[ 6.776632] yaffs: yaffs_read_super: is_checkpointed 1
<4>[ 6.801544] Uncor Ecc Err 0_th, on page 0x13828 fail., cur_try_time=-1
<4>[ 6.809506] Uncor Ecc Err 1_th, on page 0x13828 fail., cur_try_time=0
<4>[ 6.817395] read retry PASS cur_try_times=1
<4>[ 6.825528] Uncor Ecc Err 0_th, on page 0x13827 fail., cur_try_time=1
<4>[ 6.833413] read retry PASS cur_try_times=2
<4>[ 6.841893] Uncor Ecc Err 0_th, on page 0x1382a fail., cur_try_time=2
<4>[ 6.849840] Uncor Ecc Err 1_th, on page 0x1382a fail., cur_try_time=3
<4>[ 6.856956] read retry PASS cur_try_times=4
<4>[ 6.890837] UMP: UMP device driver loaded
<4>[ 6.934001] Mali: Mali device driver loaded
<6>[ 7.075362] [wmt-vd] WonderMedia HW decoder driver inited
<6>[ 7.084773] [wmt-lock] init ok, major=242, minor=1
<6>[ 7.097948] [wmt-vd] jdec Request IRQ 64 Ok.
<6>[ 7.102145] [wmt-vd] jdec registered major 236 minor 1
<6>[ 7.111142] [wmt-vd] mpeg2 registered major 236 minor 2
<6>[ 7.120189] [wmt-vd] mpeg4 registered major 236 minor 3
<6>[ 7.129287] [wmt-vd] divx registered major 236 minor 4
<6>[ 7.138294] [wmt-vd] h263 registered major 236 minor 8
<6>[ 7.167623] [wmt-vd] h264 registered major 236 minor 5
<6>[ 7.175695] [wmt-vd] vc1 registered major 236 minor 7
<6>[ 7.183105] [wmt-vd] rv registered major 236 minor 6
<6>[ 7.206193] [wmt-vd] vpx Request IRQ 88 Ok.
<6>[ 7.210310] [wmt-vd] vpx registered major 236 minor 9
<7>[ 7.221249] [wmt-ve] videoencoder_init: create video encoder proc
<4>[ 7.221261] start register videoencoder_driver
<4>[ 7.225967] *****NOW start videoencoder probe function!!*****
<6>[ 7.231852] [wmt-ve] veinfo.prdt_virt =0xffd00000,veinfo.prdt_phys =0x32a6
0000
<6>[ 7.238998] [wmt-ve] prob /dev/wmt-ve major 236, minor 0, prdt ffd00000/32
a60000, size 100 KB
<4>[ 7.247486] register videoencoder_driver done
<6>[ 7.251805] [wmt-ve] WonderMedia HW encoder driver inited
<6>[ 7.264022] [wmt-ve] encoder->irq_num = 87,encoder->isr = 0xbf0a62a8
<6>[ 7.270413] [wmt-ve] wmt-h264enc Request IRQ 87 Ok.
<6>[ 7.275237] [wmt-ve] wmt-h264enc registered major 236 minor 18
<4>[ 7.318073] wmt_vid_i2c_probe()
<3>[ 7.325354] WonderMedia CMOS camera register OK
<4>[ 7.657136] Uncor Ecc Err 0_th, on page 0x27ff0 fail., cur_try_time=4
<4>[ 7.665092] read retry PASS cur_try_times=5
<4>[ 7.689184] Uncor Ecc Err 0_th, on page 0x27fee fail., cur_try_time=5
<4>[ 7.697484] Uncor Ecc Err 1_th, on page 0x27fee fail., cur_try_time=6
<4>[ 7.705109] read retry PASS cur_try_times=-1
<3>[ 7.717347] init: try to config ril modem type...
<3>[ 7.721823] init: ril is not enable...Uncor Ecc Err 0_th, on page 0x2573c
fail., cur_try_time=-1
<4>[ 7.769700] Uncor Ecc Err 1_th, on page 0x2573c fail., cur_try_time=0
<4>[ 7.777596] read retry PASS cur_try_times=1
<3>[ 7.989003] init: cannot find '/system/etc/install-recovery.sh', disabling
'flash_recovery'
<3>[ 8.233007] init: cannot find '/system/etc/init.sh', disabling 'system_ini
t'
<3>[ 8.350094] android_usb: already disabled
<6>[ 8.354709] adb_bind_config
<6>[ 8.357444] usb_ep_autoconfig try to find ep1in-bulk
<6>[ 8.362447] usb_ep_autoconfig found ep1in-bulk
<6>[ 8.366953] usb_ep_autoconfig try to find ep2out-bulk
<6>[ 8.372070] usb_ep_autoconfig found ep2out-bulk
<6>[ 8.376846] udc: gri wmt_pullup()
<6>[ 8.380088] udc: gri pullup_enable()
<6>[ 8.385135] warning: `adbd' uses 32-bit capabilities (legacy support in us
e)
<6>[ 8.392382] adb_open
<6>[ 8.555107] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 8.638176] android_usb gadget: high speed config #1: android
<6>[ 8.643884] rndis ooooo 24
<6>[ 8.646556] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 8.906307] rndis xxxxx 24
<6>[ 9.350776] usbcore: registered new interface driver cdc_acm
<6>[ 9.356380] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
<6>[ 9.469677] USB Serial support registered for GSM modem (1-port)
<6>[ 9.475907] usbcore: registered new interface driver option
<6>[ 9.481418] option: v0.7.2:USB Driver for GSM modems
<1>[ 9.535094] [is_mc32x0]: Find mc3230(mCube g-sensor).
<6>[ 9.542536] input: g-sensor as /devices/virtual/input/input1
<4>[ 9.567353] offser gain = 482 474 418 528 256 688======================
<4>[ 9.567361]
<4>[ 9.567364] ft5406-touch reslx=600, resly=1024, Interrupt GP1, bit1, Rese
t GP0, bit4
<6>[ 9.768922] input: ft5406-touch as /devices/virtual/input/input2
<4>[ 9.793322] ERR:ft5x0x_i2c_rxdata_67:msg i2c read error: -5
<4>[ 9.798824] ERR:ft5x0x_read_data_157:read_data i2c_rxdata failed: -5
<1>[ 9.986959] [dump_kpad_devinfo]: =========================================
==========
<1>[ 9.994639] [dump_kpad_devinfo]: kpad id:baseboard devnum:1
<1>[ 10.000172] [dump_kpad_devinfo]: dev[0] type:rc_1
<1>[ 10.005104] [dump_kpad_devinfo]:
<1>[ 10.008390] [dump_kpad_devinfo]: key number:5
<1>[ 10.012810] [dump_kpad_devinfo]: key0:9e(158),
<1>[ 10.017152] [dump_kpad_devinfo]: key1:8b(139),
<1>[ 10.021655] [dump_kpad_devinfo]: key2:73(115),
<1>[ 10.026157] [dump_kpad_devinfo]: key3:72(114),
<1>[ 10.030666] [dump_kpad_devinfo]: key4:66(102),
<1>[ 10.035167] [dump_kpad_devinfo]:
<1>[ 10.038638] [dump_kpad_devinfo]: longkey num:0
<1>[ 10.043142] [dump_kpad_devinfo]: =========================================
==========
<6>[ 10.053519] input: keypad as /devices/virtual/input/input3
<4>[ 10.430673] fan GEIO_STOP_LOGO
<6>[ 10.433659] [Boot Animation] animation_stop
<4>[ 10.776949] [VPP] rx user pid 0x55
<4>[ 12.439302] mc_write:3--0
<4>[ 12.442012] mc_write:3--0
<4>[ 12.520929] [INFO] {wmt_vid_open}: vid_i2c_gpio_en 0x00000000
<4>[ 12.527775] cmos_init_gc0308 2560 1936
<4>[ 12.626609] cmos_release()
<4>[ 12.629423] [INFO] {wmt_vid_open}: vid_i2c_gpio_en 0x00000000
<4>[ 12.659689] cmos_init_yacd511 2560 1936
<4>[ 12.663553] cmos_release()
<6>[ 12.932817] [INFO] VPU Firmware Version =>
<6>[ 12.932823] product : | version : 0002.0000.00000008
<6>[ 12.932829]
<6>[ 12.947243] [INFO] msvd_dec_open(h264) bf057d54 (index 0 inUse 1)
<6>[ 12.954723] [INFO] Profile 0x4d Level 0x15 Interlace AspectRateio 0x0
<4>[ 13.060117] mc_write:3--5
<6>[ 13.064871] [INFO] VPU Firmware Version =>
<6>[ 13.064877] product : | version : 0002.0000.00000008
<6>[ 13.064883]
<6>[ 13.079297] [INFO] msvd_dec_open(h264) bf057d54 (index 0 inUse 1)
<6>[ 13.086704] [INFO] Profile 0x4d Level 0x15 Interlace AspectRateio 0x0
<4>[ 22.439434] Uncor Ecc Err 0_th, on page 0x2567e fail., cur_try_time=1
<4>[ 22.447430] Uncor Ecc Err 1_th, on page 0x2567e fail., cur_try_time=2
<4>[ 22.455322] read retry PASS cur_try_times=3
<1>[ 33.393832] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 0
<4>[ 33.399504] skip adjust backlight at the first time
<4>[ 33.404539] mc_write:1--0
<6>[ 33.419512] request_suspend_state: wakeup (3->0) at 33849036002 (2013-03-0
6 13:51:58.986161334 UTC)
<1>[ 33.430339] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 154
<4>[ 33.440196] mc_write:1--60
<6>[ 34.008832] acc_open
<6>[ 34.011157] acc_release
<4>[ 34.303820] Uncor Ecc Err 0_th, on page 0x25800 fail., cur_try_time=3
<4>[ 34.310838] read retry PASS cur_try_times=4
<4>[ 40.754027] mc_write:3--0
<3>[ 40.778421] binder: release proc 162, transaction 90, not freed
<3>[ 40.784294] binder: release proc 162, transaction 5047, not freed
<6>[ 40.884850] yaffs: dev is 32505869 name is "mtdblock13" rw
<6>[ 40.890290] yaffs: passed flags ""
<7>[ 40.893639] yaffs: yaffs: Attempting MTD mount of 31.13,"mtdblock13"
<7>[ 41.008158] yaffs: yaffs_read_super: is_checkpointed 1
<4>[ 44.126783] Uncor Ecc Err 0_th, on page 0x27fbc fail., cur_try_time=4
<4>[ 44.275513] read retry PASS cur_try_times=5
<4>[ 44.493885] Uncor Ecc Err 0_th, on page 0x27fbe fail., cur_try_time=5
<4>[ 44.524878] Uncor Ecc Err 1_th, on page 0x27fbe fail., cur_try_time=6
<4>[ 44.533376] read retry PASS cur_try_times=-1
<4>[ 46.592229] Uncor Ecc Err 0_th, on page 0x43944 fail., cur_try_time=-1
<4>[ 46.610250] Uncor Ecc Err 1_th, on page 0x43944 fail., cur_try_time=0
<4>[ 46.630067] read retry PASS cur_try_times=1
<4>[ 46.910741] Uncor Ecc Err 0_th, on page 0x43946 fail., cur_try_time=1
<4>[ 46.918700] Uncor Ecc Err 1_th, on page 0x43946 fail., cur_try_time=2
<4>[ 46.926723] read retry PASS cur_try_times=3
<4>[ 48.368608] Uncor Ecc Err 0_th, on page 0x25900 fail., cur_try_time=3
<4>[ 48.376529] read retry PASS cur_try_times=4
<4>[ 333.801387] Uncor Ecc Err 0_th, on page 0x25b00 fail., cur_try_time=4
<4>[ 333.809262] Uncor Ecc Err 1_th, on page 0x25b00 fail., cur_try_time=5
<4>[ 333.817127] Uncor Ecc Err 2_th, on page 0x25b00 fail., cur_try_time=6
<4>[ 333.824996] Uncor Ecc Err 3_th, on page 0x25b00 fail., cur_try_time=-1
<4>[ 333.832908] read retry PASS cur_try_times=0
<4>[ 333.840808] Uncor Ecc Err 0_th, on page 0x25b00 fail., cur_try_time=0
<4>[ 333.848720] Uncor Ecc Err 1_th, on page 0x25b00 fail., cur_try_time=1
<4>[ 333.856625] Uncor Ecc Err 2_th, on page 0x25b00 fail., cur_try_time=2
<4>[ 333.864500] Uncor Ecc Err 3_th, on page 0x25b00 fail., cur_try_time=3
<4>[ 333.871615] read retry PASS cur_try_times=4
<1>[ 633.830513] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 150
<4>[ 633.836406] mc_write:1--58
<1>[ 633.846984] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 147
<4>[ 633.852891] mc_write:1--57
<1>[ 633.866863] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 144
<4>[ 633.872757] mc_write:1--56
<1>[ 633.886870] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 141
<4>[ 633.894230] mc_write:1--55
<1>[ 633.903615] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 138
<4>[ 633.909819] mc_write:1--54
<1>[ 633.920203] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 135
<4>[ 633.926096] mc_write:1--52
<1>[ 633.936835] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 132
<4>[ 633.942719] mc_write:1--51
<1>[ 633.953646] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 129
<4>[ 633.959562] mc_write:1--50
<1>[ 633.970201] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 126
<4>[ 633.976094] mc_write:1--49
<1>[ 633.986882] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 123
<4>[ 633.992769] mc_write:1--48
<1>[ 634.006991] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 120
<4>[ 634.013487] mc_write:1--47
<1>[ 634.026882] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 117
<4>[ 634.032772] mc_write:1--45
<1>[ 634.046842] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 114
<4>[ 634.054196] mc_write:1--44
<1>[ 634.063611] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 111
<4>[ 634.069806] mc_write:1--43
<1>[ 634.080537] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 108
<4>[ 634.086431] mc_write:1--42
<1>[ 634.096848] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 105
<4>[ 634.102729] mc_write:1--41
<1>[ 634.113656] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 102
<4>[ 634.119662] mc_write:1--40
<1>[ 634.130198] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 100
<4>[ 634.136083] mc_write:1--39
<1>[ 641.271927] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 0
<1>[ 641.277631] [lcd_brightness]lcd turn off <--
<4>[ 641.283652] mc_write:1--0
<6>[ 641.292736] request_suspend_state: sleep (0->3) at 641722369336 (2013-03-0
6 14:02:06.859382668 UTC)
<4>[ 641.405636] -------------> do auto suspend
<3>[ 2132.167123] init: untracked pid 1061 exited
[email protected]:/ $
Click to expand...
Click to collapse
SK:dikes
ENG:thank you
ROM
SK:
Dnes som nasiel origo ROM
Ale nepodarilo sa mi to nahodit ani podla instrukcii
ENG: Today I find original shipped ROM. But, I have problem with upgrade it by the instructions.
Anyone knowns how to make jelly bean working?
Any one?..
So I managed to Unlock my GT-810 Bootloader through
Settings | About | Tapping BUILD # morethan 7x | Enabled ADB/USB Debugging | OEM Unlock | Rebooting via POWER Button + "Vol UP" | fastboot oem unluck
Click to expand...
Click to collapse
Automatically followed by a full Factory wipe (It's compulsary)
WIth several attempts creating a unsecured boot.img
with ro.secure set to 0 and booting it via
fastboot boot recovery.img
Click to expand...
Click to collapse
My Initial attempts were failures (Not that my succeeding one were success) and simply reverts to the FASTBOOT mode.
fastboot boot unsecboot.img
Click to expand...
Click to collapse
Indicates boot.img was executed and validated but reverts to fastboot mode.
Considering it was from stock boot.img from Acer's AVOLO zip, I courageously did a
Fastboot boot unsecboot.img
Click to expand...
Click to collapse
Same Results. Still a good thing that it boots the system normally. As I check on my default.prop, it still indicates ro.secure as 1,. so the Flashing did not kick in or was ineffective.
______________________________________
So the I searched through possible TWRP/CMW Recoveries based on Intel Cherry Trail
I found one for testing @ https[:]//drive.google.com/file/d/0B67Q-LsaF0w0WmxPZ0YxTl9PTWc/view?usp=sharing
But flashing the TWRP from above linksI thought was one step closer.
I was even able to create backups thru the tethered Recovery.
Note when I indicated TETHERED, the FBRL did not work on all T1~4
Instead, I simply boot via FASTBOOT BOOT found-Recovery.img
Click to expand...
Click to collapse
And to make the found-Recovery image work is to use a powered OTG cable and a mouse.
Since the Touchscreen does not work, but notice on my Snap-shots a cursor, where I am able to navigate.
Challenge: Flashing latest superSu.zip works as if there is no issue.
But as soon as I reboot the device - it just stays on the Boot Logo.
DMESG on my Linux indicates USB host has been triggered but neither it was FASTBOOT or ADB
So key is, I DID NOT or WILL NOT Flash any recovery. (There is no STOCK-RECOVERY.img anywhere)
I was able to unbrick via going to it's stock recovery POWER + VOL Down (key closer to power button)
Download the Avolo zip from acer support, save it to my SD and flash it through the stock recovery.
Predator Survives and works to test another set of Rooting tools.
____________________________________________
Using the TWRP from the link above, I tried to edit the contents via Unpacking and repacking with Commandlines merged from the stock and onto the Host TWRP
I do understand that there are more stuff to be done in here and I am willing to get helped.
____________________________________________
It still boots on TWRP but is unable to mount File systems other than my SD card, complete failure or worse, purely expiremental as I repacked the Recovery after adding a couple of files as I read on some Tuts
So I added or replaced the files from Stock into the CUSTOM TWRP
#copied
fstab
uevent.rc
uevebt.rolex.rc
#Later I realize those *.rc's was not called somewhere as the Recovery loads bia Fastboot BOOT command.
____________________________________________
SO MAY I HEREBY REQUEST if anyone can try to PORT Acer Predator 8 Stock boot.img with TWRP.
____________________________________________
Thank you in advance.
Reconnaissance done prior to dwelling for the Root:
Here are more info for the given device.
#Build.prop
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.boot.fake_battery=0
ro.frp.pst=/dev/block/by-name/android_persistent
ro.sf.lcd_density=320
persist.intel.ogl.username=Developer
persist.intel.ogl.debug=/data/ufo.prop
persist.intel.ogl.dumpdebugvars=1
ro.ufo.use_msync=1
ro.ufo.use_coreu=1
wifi.interface=wlan0
config.disable_cellcoex=1
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
ro.modules.location=/system/lib/modules
ro.zygote=zygote64_32
ro.dalvik.vm.native.bridge=libhoudini.so
persist.sys.usb.config=mtp
ro.adb.secure=1
dalvik.vm.dex2oat-Xms=64m
dalvik.vm.dex2oat-Xmx=512m
dalvik.vm.image-dex2oat-Xms=64m
dalvik.vm.image-dex2oat-Xmx=64m
Source: AVOLO.zip from Support site, File is extracted from Boot.img "umkbootimg"
Partition Logs (coming from TWRP log on Boot)
Partition Logs:
/boot | /dev/block/mmcblk0p3 | Size: 30MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p3
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/cache | /dev/block/mmcblk0p9 | Size: 484MB Used: 1MB Free: 483MB Backup Size: 1MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p9
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: auto
Backup_Method: files
/factory | /dev/block/mmcblk0p14 | Size: 5MB Used: 0MB Free: 5MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped IsPresent
Primary_Block_Device: /dev/block/mmcblk0p14
Display_Name: Factory
Storage_Name: Factory
Backup_Path: /factory
Backup_Name: factory
Backup_Display_Name: Factory
Storage_Path: /factory
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/config | /dev/block/mmcblk0p13 | Size: 3MB Used: 0MB Free: 3MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p13
Display_Name: config
Storage_Name: config
Backup_Path: /config
Backup_Name: config
Backup_Display_Name: config
Storage_Path: /config
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p11 | Size: 23383MB Used: 1194MB Free: 22074MB Backup Size: 1194MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media/0
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p11
Crypto_Key_Location: /factory/userdata_footer
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media/0
Current_File_System: ext4
Fstab_File_System: auto
Backup_Method: files
MTP_Storage_ID: 65537
/misc | /dev/block/mmcblk0p6 | Size: 1MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p6
Display_Name: Misc
Storage_Name: Misc
Backup_Path: /misc
Backup_Name: misc
Backup_Display_Name: Misc
Storage_Path: /misc
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/recovery | /dev/block/mmcblk0p4 | Size: 30MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p4
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/system | /dev/block/mmcblk0p8 | Size: 4920MB Used: 2272MB Free: 2647MB Backup Size: 2272MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p8
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/usb_otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usb_otg
Backup_Name: usb_otg
Backup_Display_Name: USB-OTG
Storage_Path: /usb_otg
Current_File_System: auto
Fstab_File_System: auto
Backup_Method: files
MTP_Storage_ID: 65538
/external_sd | /dev/block/mmcblk1p1 | Size: 30424MB Used: 10225MB Free: 20198MB Backup Size: 10225MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Display_Name: MicroSD
Storage_Name: MicroSD
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: MicroSD
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65539
Extracting STOCK BOOT.IMG
unmkbootimg version 1.2 - Mikael Q Kuisma <[email protected]>
Kernel size 7762368
Kernel address 0x10008000
Ramdisk size 1541367
Ramdisk address 0x11000000
Secondary size 0
Secondary address 0x10f00000
Kernel tags address 0x10000100
Flash page size 2048
Board name is ""
Command line "loglevel=8 androidboot.hardware=rolex firmware_class.path=/system/etc/firmware i915.fastboot=1 memmap=4M$0x5c400000 oops=panic panic=10 vga=current i915.modeset=1 drm.vblankoffdelay=1 bootboost=1 pm_suspend_debug=1 pstore.backend=ramoops"
This image is built using standard mkbootimg
Extracting kernel to file zImage ...
Extracting root filesystem to file initramfs.cpio.gz ...
All done.
---------------
To recompile this image, use:
mkbootimg --kernel zImage --ramdisk initramfs.cpio.gz --cmdline 'loglevel=8 androidboot.hardware=rolex firmware_class.path=/system/etc/firmware i915.fastboot=1 memmap=4M$0x5c400000 oops=panic panic=10 vga=current i915.modeset=1 drm.vblankoffdelay=1 bootboost=1 pm_suspend_debug=1 pstore.backend=ramoops' -o new_boot.img
---------------
.:
boot.img
dir.txt
initramfs.cpio.gz
mnt
origlog.txt
zImage
./mnt:
charger
data
default.prop
dev
file_contexts
fstab
init
init.aosp.rc
init.environ.rc
init.rc
init.recovery.rolex.rc
init.rolex.rc
init.rolex.usb.rc
init.trace.rc
init.usb.rc
init.zygote32.rc
init.zygote64_32.rc
intel_prop.cfg
lib
proc
property_contexts
res
rfkill_bt.sh
sbin
seapp_contexts
selinux_version
sepolicy
service_contexts
sys
system
thermal_lite
ueventd.rc
ueventd.rolex.rc
verity_key
ls: cannot open directory './mnt/data': Permission denied
./mnt/dev:
./mnt/lib:
modules
./mnt/lib/modules:
emu_eeprom.ko
./mnt/proc:
./mnt/res:
images
vidt_sign.bin
./mnt/res/images:
charger
./mnt/res/images/charger:
battery_0.png
battery_1.png
battery_2.png
battery_3.png
battery_4.png
battery_5.png
battery_fail.png
battery_low.png
battery_scale.png
battery_temp.png
ls: cannot open directory './mnt/sbin': Permission denied
./mnt/sys:
./mnt/system:
_______________________
#FSTAB
# ----------------- BEGIN MIX-IN DEFINITIONS -----------------
# Mix-In definitions are auto-generated by mixin-update
##############################################################
# Source: device/intel/mixins/groups/boot-arch/efi/fstab
##############################################################
# Android fstab file.
# <src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
/dev/block/by-name/android_system /system ext4 ro wait,verify
/dev/block/by-name/android_cache /cache ext4 noatime,nosuid,nodev,errors=panic wait,check
/dev/block/by-name/android_data /data ext4 noatime,nosuid,nodev,discard,noauto_da_alloc,errors=panic wait,check,encryptable=/dev/block/by-name/android_metadata
/dev/block/by-name/android_boot /boot emmc defaults defaults
/dev/block/by-name/android_recovery /recovery emmc defaults defaults
/dev/block/by-name/android_misc /misc emmc defaults defaults
/dev/block/by-name/android_bootloader /bootloader emmc defaults recoveryonly
/dev/block/by-name/android_bootloader2 /bootloader2 emmc defaults recoveryonly
/dev/block/by-name/android_persistent /persistent emmc defaults defaults
/dev/block/by-name/android_metadata /metadata emmc defaults defaults
##############################################################
# Source: device/intel/mixins/groups/config-partition/enabled/fstab
##############################################################
/dev/block/by-name/android_config /config ext4 noatime,nosuid,nodev,errors=panic wait,check
##############################################################
# Source: device/intel/mixins/groups/storage/sdcard-mmcblk1-4xUSB-sda-emulated/fstab
##############################################################
*/block/sd* auto vfat defaults voldmanaged=usbdisk:auto
*/block/mmcblk1* auto vfat defaults voldmanaged=sdcard1:auto
/dev/block/mmcblk1p1 /sdcard vfat defaults recoveryonly
##############################################################
# Source: device/intel/mixins/groups/factory-partition/enabled/fstab
##############################################################
/dev/block/by-name/android_factory /factory ext4 rw wait
# ------------------ END MIX-IN DEFINITIONS ------------------
/dev/block/zram0 none swap defaults zramsize=536870912
---------------
#Full Dump/Backup using TWRP
total 3604370
-rwxrwxrwx 1 oem oem 1605437440 Oct 18 00:02 system.ext4.win000
-rwxrwxrwx 1 oem oem 1255762944 Oct 17 23:59 data.ext4.win
-rwxrwxrwx 1 oem oem 764068352 Oct 18 00:04 system.ext4.win001
-rwxrwxrwx 1 oem oem 31457280 Oct 17 23:56 boot.emmc.win
-rwxrwxrwx 1 oem oem 31457280 Oct 18 00:00 recovery.emmc.win
-rwxrwxrwx 1 oem oem 1048576 Oct 17 23:59 misc.emmc.win
-rwxrwxrwx 1 oem oem 892928 Oct 17 23:57 cache.ext4.win
-rwxrwxrwx 1 oem oem 733042 Oct 18 00:05 recovery.log
-rwxrwxrwx 1 oem oem 2560 Oct 17 23:57 config.ext4.win
-rwxrwxrwx 1 oem oem 65 Oct 17 23:59 data.info
-rwxrwxrwx 1 oem oem 65 Oct 18 00:04 system.info
-rwxrwxrwx 1 oem oem 59 Oct 17 23:57 cache.info
-rwxrwxrwx 1 oem oem 53 Oct 17 23:57 config.info
-rwxrwxrwx 1 oem oem 53 Oct 18 00:05 system.ext4.win000.md5
-rwxrwxrwx 1 oem oem 53 Oct 18 00:05 system.ext4.win001.md5
-rwxrwxrwx 1 oem oem 52 Oct 18 00:00 recovery.emmc.win.md5
-rwxrwxrwx 1 oem oem 50 Oct 17 23:57 config.ext4.win.md5
-rwxrwxrwx 1 oem oem 49 Oct 17 23:57 cache.ext4.win.md5
-rwxrwxrwx 1 oem oem 48 Oct 17 23:56 boot.emmc.win.md5
-rwxrwxrwx 1 oem oem 48 Oct 17 23:59 data.ext4.win.md5
-rwxrwxrwx 1 oem oem 48 Oct 18 00:00 misc.emmc.win.md5
drwxrwxrwx 1 oem oem 0 Oct 18 09:40 Extracts
-rwxrwxrwx 1 oem oem 0 Oct 18 09:57 list.txt
I also tried Flashing the Stock Avolo zip file for Acer support via TWRP and got Error, unable to recognize or is unable to execute BIOS update
Click to expand...
Click to collapse
#Fastboot getvar all
(bootloader) serialno: 96791262
(bootloader) board: Insyde Cherry Trail FFD CherryTrail
(bootloader) device-state: unlocked
(bootloader) boot-state: ORANGE
(bootloader) firmware: INSYDE Corp. V1.08
(bootloader) product-name: Cherry Trail Tablet
(bootloader) secureboot: yes
(bootloader) off-mode-charge: 1
(bootloader) unlocked: yes
(bootloader) secure: no
(bootloader) partition-type:factory: ext4
(bootloader) partition-size:factory: 0x0000000000A00000
(bootloader) partition-type:config: ext4
(bootloader) partition-size:config: 0x0000000000800000
(bootloader) partition-typeersistent: ext4
(bootloader) partition-sizeersistent: 0x0000000000100000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:userdata: 0x00000005D4E00000
(bootloader) partition-type:data: ext4
(bootloader) partition-size:data: 0x00000005D4E00000
(bootloader) partition-typeE2: none
(bootloader) partition-sizeE2: 0x0000000000A00000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:cache: 0x000000001F400000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:system: 0x0000000140000000
(bootloader) partition-type:metadata: none
(bootloader) partition-size:metadata: 0x0000000001000000
(bootloader) partition-type:misc: none
(bootloader) partition-size:misc: 0x0000000000100000
(bootloader) partition-typeE1: none
(bootloader) partition-sizeE1: 0x0000000000A00000
(bootloader) partition-type:recovery: none
(bootloader) partition-size:recovery: 0x0000000001E00000
(bootloader) partition-type:boot: none
(bootloader) partition-size:boot: 0x0000000001E00000
(bootloader) partition-type:bootloader2: none
(bootloader) partition-size:bootloader2: 0x0000000006400000
(bootloader) partition-type:bootloader: vfat
(bootloader) partition-size:bootloader: 0x0000000006400000
(bootloader) max-download-size: 0x0000000018000000
(bootloader) battery-voltage: 4086mV
(bootloader) version-bootloader: kernelflinger-02.11-10e7456
(bootloader) product: rolex
all:
finished. total time: 0.077s
So I finally am able to flash an Unsecured boot.img, am able to exexute "adb root"
With my linux, Konsole indicates
"restarting as Root"
But I guess the tablet still setup a persistent reset for unroot ADB, but I am able to obtain these info from ADB as root (Kinda)
"adb shell getprop ro.debuggable" 1
"adb shell cat /proc/partitions"
major minor #blocks name
254 0 524288 zram0
179 0 30539776 mmcblk0
179 1 102400 mmcblk0p1
179 2 102400 mmcblk0p2
179 3 30720 mmcblk0p3
179 4 30720 mmcblk0p4
179 5 10240 mmcblk0p5
179 6 1024 mmcblk0p6
179 7 16384 mmcblk0p7
179 8 5242880 mmcblk0p8
179 9 512000 mmcblk0p9
179 10 10240 mmcblk0p10
179 11 24459264 mmcblk0p11
179 12 1024 mmcblk0p12
179 13 8192 mmcblk0p13
179 14 10240 mmcblk0p14
179 48 4096 mmcblk0rpmb
179 32 4096 mmcblk0boot1
179 16 4096 mmcblk0boot0
179 64 31166976 mmcblk1
179 65 31162880 mmcblk1p1
Click to expand...
Click to collapse
I will now commence Dumping these partitions and guess which one is Recovery
If I am able to dump these as IMG's, then I would unpack to check also will again RUN Fastboot boot Recovery.img
To check if it does gets me into STOCK recovery, this way We will now have a STOCK-Recovery image!
Dmesg from ADB with Stock ROM
<6>[ 0.000000] Initializing cgroup subsys cpuset
<6>[ 0.000000] Initializing cgroup subsys cpu
<6>[ 0.000000] Initializing cgroup subsys cpuacct
<5>[ 0.000000] Linux version 3.14.37-x86_64+ ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Fri Dec 11 12:05:05 CST 2015
<6>[ 0.000000] Command line: console=null androidboot.bootreason=unknown androidboot.serialno=81086752 g_ffs.iSerialNumber=81086752 loglevel=8 androidboot.hardware=rolex firmware_class.path=/system/etc/firmware i915.fastboot=1 memmap=4M$0x5c400000 oops=panic panic=10 vga=current i915.modeset=1 drm.vblankoffdelay=1 bootboost=1 pm_suspend_debug=1 pstore.backend=ramoops
<6>[ 0.000000] e820: BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000070ffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000071000000-0x0000000071ffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000072000000-0x0000000072aeafff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000072aeb000-0x0000000072af3fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000072af4000-0x00000000762f3fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x00000000762f4000-0x0000000076c03fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000076c04000-0x0000000076d03fff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x0000000076d04000-0x0000000076d43fff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x0000000076d44000-0x0000000077ffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fff60000-0x00000000ffffffff] reserved
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] e820: user-defined physical RAM map:
<6>[ 0.000000] user: [mem 0x0000000000000000-0x000000000008efff] usable
<6>[ 0.000000] user: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
<6>[ 0.000000] user: [mem 0x0000000000090000-0x000000000009ffff] usable
<6>[ 0.000000] user: [mem 0x0000000000100000-0x000000001fffffff] usable
<6>[ 0.000000] user: [mem 0x0000000020000000-0x00000000201fffff] reserved
<6>[ 0.000000] user: [mem 0x0000000020200000-0x000000005c3fffff] usable
<6>[ 0.000000] user: [mem 0x000000005c400000-0x000000005c7fffff] reserved
<6>[ 0.000000] user: [mem 0x000000005c800000-0x0000000070ffffff] usable
<6>[ 0.000000] user: [mem 0x0000000071000000-0x0000000071ffffff] reserved
<6>[ 0.000000] user: [mem 0x0000000072000000-0x0000000072aeafff] usable
<6>[ 0.000000] user: [mem 0x0000000072aeb000-0x0000000072af3fff] reserved
<6>[ 0.000000] user: [mem 0x0000000072af4000-0x00000000762f3fff] usable
<6>[ 0.000000] user: [mem 0x00000000762f4000-0x0000000076c03fff] reserved
<6>[ 0.000000] user: [mem 0x0000000076c04000-0x0000000076d03fff] ACPI NVS
<6>[ 0.000000] user: [mem 0x0000000076d04000-0x0000000076d43fff] ACPI data
<6>[ 0.000000] user: [mem 0x0000000076d44000-0x0000000077ffffff] usable
<6>[ 0.000000] user: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
<6>[ 0.000000] user: [mem 0x00000000fea00000-0x00000000feafffff] reserved
<6>[ 0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
<6>[ 0.000000] user: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
<6>[ 0.000000] user: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
<6>[ 0.000000] user: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
<6>[ 0.000000] user: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
<6>[ 0.000000] user: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
<6>[ 0.000000] user: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
<6>[ 0.000000] user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
<6>[ 0.000000] user: [mem 0x00000000fff60000-0x00000000ffffffff] reserved
<6>[ 0.000000] efi: EFI v2.40 by INSYDE Corp.
<6>[ 0.000000] efi: ACPI 2.0=0x76d43014 SMBIOS=0x76403000
<6>[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
<6>[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000002000) (0MB)
<6>[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000002000-0x000000000008f000) (0MB)
<6>[ 0.000000] efi: mem03: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
<6>[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009f000) (0MB)
<6>[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
<6>[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000279000) (1MB)
<6>[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000000279000-0x0000000001000000) (13MB)
<6>[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x00000000029cb000) (25MB)
<6>[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x00000000029cb000-0x0000000020000000) (470MB)
<6>[ 0.000000] efi: mem10: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
<6>[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000020200000-0x0000000028000000) (126MB)
<6>[ 0.000000] efi: mem12: type=4, attr=0xf, range=[0x0000000028000000-0x00000000283f0000) (3MB)
<6>[ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x00000000283f0000-0x000000003fffc000) (380MB)
<6>[ 0.000000] efi: mem14: type=2, attr=0xf, range=[0x000000003fffc000-0x0000000040000000) (0MB)
<6>[ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x0000000040000000-0x000000006e000000) (736MB)
<6>[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000006e000000-0x000000006e020000) (0MB)
<6>[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x000000006e020000-0x000000007071e000) (38MB)
<6>[ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x000000007071e000-0x0000000071000000) (8MB)
<6>[ 0.000000] efi: mem19: type=0, attr=0xf, range=[0x0000000071000000-0x0000000072000000) (16MB)
<6>[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000072000000-0x000000007276a000) (7MB)
<6>[ 0.000000] efi: mem21: type=1, attr=0xf, range=[0x000000007276a000-0x0000000072aeb000) (3MB)
<6>[ 0.000000] efi: mem22: type=5, attr=0x800000000000000f, range=[0x0000000072aeb000-0x0000000072af4000) (0MB)
<6>[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x0000000072af4000-0x0000000072bf2000) (0MB)
<6>[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x0000000072bf2000-0x0000000072bf4000) (0MB)
<6>[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x0000000072bf4000-0x0000000073909000) (13MB)
<6>[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x0000000073909000-0x000000007390a000) (0MB)
<6>[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x000000007390a000-0x0000000073ca2000) (3MB)
<6>[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x0000000073ca2000-0x00000000752f4000) (22MB)
<6>[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000752f4000-0x0000000075ef4000) (12MB)
<6>[ 0.000000] efi: mem30: type=3, attr=0xf, range=[0x0000000075ef4000-0x00000000762f4000) (4MB)
<6>[ 0.000000] efi: mem31: type=5, attr=0x800000000000000f, range=[0x00000000762f4000-0x0000000076384000) (0MB)
<6>[ 0.000000] efi: mem32: type=6, attr=0x800000000000000f, range=[0x0000000076384000-0x0000000076604000) (2MB)
<6>[ 0.000000] efi: mem33: type=0, attr=0xf, range=[0x0000000076604000-0x0000000076c04000) (6MB)
<6>[ 0.000000] efi: mem34: type=10, attr=0xf, range=[0x0000000076c04000-0x0000000076d04000) (1MB)
<6>[ 0.000000] efi: mem35: type=9, attr=0xf, range=[0x0000000076d04000-0x0000000076d44000) (0MB)
<6>[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x0000000076d44000-0x0000000077bd5000) (14MB)
<6>[ 0.000000] efi: mem37: type=2, attr=0xf, range=[0x0000000077bd5000-0x0000000077bd6000) (0MB)
<6>[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x0000000077bd6000-0x0000000078000000) (4MB)
<6>[ 0.000000] efi: mem39: type=12, attr=0x8000000000000000, range=[0x00000000e0000000-0x00000000e4000000) (64MB)
<6>[ 0.000000] efi: mem40: type=11, attr=0x8000000000000000, range=[0x00000000fea00000-0x00000000feb00000) (1MB)
<6>[ 0.000000] efi: mem41: type=11, attr=0x8000000000000000, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
<6>[ 0.000000] efi: mem42: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
<6>[ 0.000000] efi: mem43: type=11, attr=0x8000000000000001, range=[0x00000000fed03000-0x00000000fed04000) (0MB)
<6>[ 0.000000] efi: mem44: type=11, attr=0x8000000000000000, range=[0x00000000fed06000-0x00000000fed07000) (0MB)
<6>[ 0.000000] efi: mem45: type=11, attr=0x8000000000000000, range=[0x00000000fed08000-0x00000000fed0a000) (0MB)
<6>[ 0.000000] efi: mem46: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed1d000) (0MB)
<6>[ 0.000000] efi: mem47: type=11, attr=0x8000000000000000, range=[0x00000000fed80000-0x00000000fedc0000) (0MB)
<6>[ 0.000000] efi: mem48: type=11, attr=0x8000000000000000, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
<6>[ 0.000000] efi: mem49: type=11, attr=0x8000000000000000, range=[0x00000000fff60000-0x0000000100000000) (0MB)
<6>[ 0.000000] SMBIOS 2.8 present.
<7>[ 0.000000] DMI: Insyde Cherry Trail Tablet/Cherry Trail FFD, BIOS V1.08 05/07/2015
<7>[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
<7>[ 0.000000] MTRR default type: uncachable
<7>[ 0.000000] MTRR fixed ranges enabled:
<7>[ 0.000000] 00000-9FFFF write-back
<7>[ 0.000000] A0000-FFFFF write-protect
<7>[ 0.000000] MTRR variable ranges enabled:
<7>[ 0.000000] 0 base 0FFF80000 mask FFFF80000 write-protect
<7>[ 0.000000] 1 base 0FFF60000 mask FFFFE0000 write-protect
<7>[ 0.000000] 2 base 000000000 mask F80000000 write-back
<7>[ 0.000000] 3 base 07E000000 mask FFE000000 uncachable
<7>[ 0.000000] 4 base 07D000000 mask FFF000000 uncachable
<7>[ 0.000000] 5 base 07C800000 mask FFF800000 uncachable
<7>[ 0.000000] 6 base 07C400000 mask FFFC00000 uncachable
<7>[ 0.000000] 7 disabled
<6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<6>[ 0.000000] Scanning 1 areas for low memory corruption
<7>[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672
<6>[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
<7>[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
<7>[ 0.000000] BRK [0x026f8000, 0x026f8fff] PGTABLE
<7>[ 0.000000] BRK [0x026f9000, 0x026f9fff] PGTABLE
<7>[ 0.000000] BRK [0x026fa000, 0x026fafff] PGTABLE
<6>[ 0.000000] init_memory_mapping: [mem 0x75c00000-0x75dfffff]
<7>[ 0.000000] [mem 0x75c00000-0x75dfffff] page 2M
<7>[ 0.000000] BRK [0x026fb000, 0x026fbfff] PGTABLE
<6>[ 0.000000] init_memory_mapping: [mem 0x74000000-0x75bfffff]
<7>[ 0.000000] [mem 0x74000000-0x75bfffff] page 2M
<6>[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
<7>[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
<7>[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
<6>[ 0.000000] init_memory_mapping: [mem 0x20200000-0x5c3fffff]
<7>[ 0.000000] [mem 0x20200000-0x5c3fffff] page 2M
<6>[ 0.000000] init_memory_mapping: [mem 0x5c800000-0x70ffffff]
<7>[ 0.000000] [mem 0x5c800000-0x70ffffff] page 2M
<6>[ 0.000000] init_memory_mapping: [mem 0x72000000-0x72aeafff]
<7>[ 0.000000] [mem 0x72000000-0x729fffff] page 2M
<7>[ 0.000000] [mem 0x72a00000-0x72aeafff] page 4k
<7>[ 0.000000] BRK [0x026fc000, 0x026fcfff] PGTABLE
<6>[ 0.000000] init_memory_mapping: [mem 0x72af4000-0x73ffffff]
<7>[ 0.000000] [mem 0x72af4000-0x72bfffff] page 4k
<7>[ 0.000000] [mem 0x72c00000-0x73ffffff] page 2M
<6>[ 0.000000] init_memory_mapping: [mem 0x75e00000-0x762f3fff]
<7>[ 0.000000] [mem 0x75e00000-0x761fffff] page 2M
<7>[ 0.000000] [mem 0x76200000-0x762f3fff] page 4k
<7>[ 0.000000] BRK [0x026fd000, 0x026fdfff] PGTABLE
<6>[ 0.000000] init_memory_mapping: [mem 0x76d44000-0x77ffffff]
<7>[ 0.000000] [mem 0x76d44000-0x76dfffff] page 4k
<7>[ 0.000000] [mem 0x76e00000-0x77ffffff] page 2M
<6>[ 0.000000] RAMDISK: [mem 0x00100000-0x00278fff]
<7>[ 0.000000] ACPI: RSDP 0000000076d43014 000024 (v02 INSYDE)
<7>[ 0.000000] ACPI: XSDT 0000000076d43120 0000C4 (v01 INSYDE INSYDE 00000003 01000013)
<7>[ 0.000000] ACPI: FACP 0000000076d3e000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000)
<7>[ 0.000000] ACPI: DSDT 0000000076d1f000 019B13 (v02 INSYDE INSYDE 00000003 ACPI 00040000)
<7>[ 0.000000] ACPI: FACS 0000000076cb8000 000040
<7>[ 0.000000] ACPI: UEFI 0000000076d42000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
<7>[ 0.000000] ACPI: UEFI 0000000076d40000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
<7>[ 0.000000] ACPI: HPET 0000000076d3d000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
<7>[ 0.000000] ACPI: LPIT 0000000076d3c000 000104 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
<7>[ 0.000000] ACPI: APIC 0000000076d3b000 00006C (v03 INSYDE INSYDE 00000003 ACPI 00040000)
<7>[ 0.000000] ACPI: MCFG 0000000076d3a000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
<7>[ 0.000000] ACPI: PRAM 0000000076d39000 000030 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
<7>[ 0.000000] ACPI: SSDT 0000000076d1e000 0006A0 (v01 INSYDE CpuDptf 00000003 ACPI 00040000)
<7>[ 0.000000] ACPI: SSDT 0000000076d1a000 003018 (v01 INSYDE DptfTab 00000003 ACPI 00040000)
<7>[ 0.000000] ACPI: SSDT 0000000076d19000 000058 (v01 INSYDE LowPwrM 00000003 ACPI 00040000)
<7>[ 0.000000] ACPI: SSDT 0000000076d18000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000)
<7>[ 0.000000] ACPI: SSDT 0000000076d17000 000290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000)
<7>[ 0.000000] ACPI: SSDT 0000000076d16000 00017A (v01 INSYDE ApTst 00003000 ACPI 00040000)
<7>[ 0.000000] ACPI: CSRT 0000000076d3f000 00014C (v00 INSYDE INSYDE 00000003 ACPI 00040000)
<7>[ 0.000000] ACPI: BCFG 0000000076d15000 000139 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
<7>[ 0.000000] ACPI: OEM1 0000000076d14000 000040 (v01 INSYDE INSYDE 00000005 ACPI 00040000)
<7>[ 0.000000] ACPI: PIDV 0000000076d13000 0000DC (v02 INSYDE INSYDE 00000002 ACPI 00040000)
<7>[ 0.000000] ACPI: RSCI 0000000076d12000 00002C (v01 INSYDE INSYDE 00000000 ACPI 00040000)
<7>[ 0.000000] ACPI: FPDT 0000000076d11000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<7>[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006f200000-ffff880070dfffff] on node 0
<7>[ 0.000000] Zone ranges:
<7>[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
<7>[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
<7>[ 0.000000] Normal empty
<7>[ 0.000000] Movable zone start for each node
<7>[ 0.000000] Early memory node ranges
<7>[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
<7>[ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
<7>[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
<7>[ 0.000000] node 0: [mem 0x20200000-0x5c3fffff]
<7>[ 0.000000] node 0: [mem 0x5c800000-0x70ffffff]
<7>[ 0.000000] node 0: [mem 0x72000000-0x72aeafff]
<7>[ 0.000000] node 0: [mem 0x72af4000-0x762f3fff]
<7>[ 0.000000] node 0: [mem 0x76d44000-0x77ffffff]
<7>[ 0.000000] On node 0 totalpages: 483141
<7>[ 0.000000] DMA zone: 56 pages used for memmap
<7>[ 0.000000] DMA zone: 400 pages reserved
<7>[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
<7>[ 0.000000] DMA32 zone: 6664 pages used for memmap
<7>[ 0.000000] DMA32 zone: 479143 pages, LIFO batch:31
<6>[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
<6>[ 0.000000] Reserving Intel graphics stolen memory at 0x7ce00000-0x7edfffff
<6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
<6>[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<6>[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>[ 0.000000] ACPI: IRQ0 used by override.
<7>[ 0.000000] ACPI: IRQ2 used by override.
<7>[ 0.000000] ACPI: IRQ9 used by override.
<6>[ 0.000000] Using ACPI (MADT) for SMP configuration information
<6>[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
<6>[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
<7>[ 0.000000] nr_irqs_gsi: 131
<6>[ 0.000000] e820: [mem 0x7ee00000-0xdfffffff] available for PCI devices
<6>[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
<6>[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880075c00000 s77440 r8192 d20864 u524288
<7>[ 0.000000] pcpu-alloc: s77440 r8192 d20864 u524288 alloc=1*2097152
<7>[ 0.000000] pcpu-alloc: [0] 0 1 2 3
<7>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 476021
<5>[ 0.000000] Kernel command line: console=null androidboot.bootreason=unknown androidboot.serialno=81086752 g_ffs.iSerialNumber=81086752 loglevel=8 androidboot.hardware=rolex firmware_class.path=/system/etc/firmware i915.fastboot=1 memmap=4M$0x5c400000 oops=panic panic=10 vga=current i915.modeset=1 drm.vblankoffdelay=1 bootboost=1 pm_suspend_debug=1 pstore.backend=ramoops
<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<7>[ 0.000000] Memory: 1824812K/1932564K available (10233K kernel code, 2304K rwdata, 5168K rodata, 1360K init, 1384K bss, 107752K reserved)
Click to expand...
Click to collapse
Acer Predator 8 Gt-810 PARTITION INFORMATION
<7>[ 10.445769] EMU EEPROM version 31
<5>[ 10.446387] audit: type=1400 audit(1476914694.521:4): avc: denied { setattr } for pid=1 comm="init" name="mmcblk0p10" dev="tmpfs" ino=8834 scontext=u:r:init:s0 tcontext=ubject_r:block_device:s0 tclass=blk_file permissive=0
<11>[ 10.446645] init: /dev/hw_random not found
<7>[ 10.466401] SELinux: initialized (dev efivarfs, type efivarfs), uses genfs_contexts
<6>[ 10.477534] bio: create slab <bio-1> at 1
<6>[ 10.487601] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
<7>[ 10.487631] SELinux: initialized (dev dm-0, type ext4), uses xattr
<14>[ 10.487700] fs_mgr: __mount(source=/dev/block/dm-0,target=/system,type=ext4)=0
<4>[ 10.488173] EXT4-fs (mmcblk0p9): Ignoring removed nomblk_io_submit option
<6>[ 10.492476] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 10.492491] SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
<14>[ 10.492529] fs_mgr: check_fs(): mount(/dev/block/by-name/android_cache,/cache,ext4)=0
<14>[ 10.513444] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/android_cache
<14>[ 10.591806] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[ 10.591855] e2fsck: /dev/block/by-name/android_cache: clean, 38/32000 files, 4191/128000 blocks
<6>[ 10.596341] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: errors=panic
<7>[ 10.596368] SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
<14>[ 10.596426] fs_mgr: __mount(source=/dev/block/by-name/android_cache,target=/cache,type=ext4)=0
<4>[ 10.597184] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
<6>[ 10.603487] EXT4-fs (mmcblk0p11): 4 orphan inodes deleted
<6>[ 10.603498] EXT4-fs (mmcblk0p11): recovery complete
<6>[ 10.609467] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 10.609490] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
<14>[ 10.609549] fs_mgr: check_fs(): mount(/dev/block/by-name/android_data,/data,ext4)=0
<14>[ 10.619507] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/android_data
<14>[ 10.637342] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[ 10.637375] e2fsck: /dev/block/by-name/android_data: clean, 3682/1528912 files, 1451691/6114816 blocks
<6>[ 10.640946] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,errors=panic
<7>[ 10.640970] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
<14>[ 10.641015] fs_mgr: __mount(source=/dev/block/by-name/android_data,target=/data,type=ext4)=0
<4>[ 10.641716] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
<6>[ 10.644389] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 10.644403] SELinux: initialized (dev mmcblk0p13, type ext4), uses xattr
<14>[ 10.644440] fs_mgr: check_fs(): mount(/dev/block/by-name/android_config,/config,ext4)=0
<14>[ 10.655660] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/android_config
<14>[ 10.661542] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[ 10.661577] e2fsck: /dev/block/by-name/android_config: clean, 12/512 files, 1072/2048 blocks
<6>[ 10.665029] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: errors=panic
<7>[ 10.665050] SELinux: initialized (dev mmcblk0p13, type ext4), uses xattr
<14>[ 10.665091] fs_mgr: __mount(source=/dev/block/by-name/android_config,target=/config,type=ext4)=0
<6>[ 10.669138] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null)
<7>[ 10.669168] SELinux: initialized (dev mmcblk0p14, type ext4), uses xattr
<14>[ 10.669219] fs_mgr: __mount(source=/dev/block/by-name/android_factory,target=/factory,type=ext4)=0
<6>[ 10.716986] Adding 524284k swap on /dev/block/zram0. Priority:-1 extents:1 across:524284k SS
<11>[ 10.718129] init: Warning! Service acer_dinfo_init needs a SELinux domain defined; please fix!
<7>[ 10.718778] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
<11>[ 10.722918] init: cannot find '/system/bin/bd_prov', disabling 'bd_prov'
<7>[ 10.733697] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
Click to expand...
Click to collapse
pleas backup system\etc download
livedten said:
pleas backup system\etc download
Click to expand...
Click to collapse
deleted
---------- Post added at 02:20 PM ---------- Previous post was at 01:54 PM ----------
arjaylzo said:
Acer Predator 8 Gt-810 PARTITION INFORMATION
Click to expand...
Click to collapse
Downloaded TWRP.img i replaced with stock kernel, changed modules, fstab, and got touchscreen working and all partitions are working, no bugs that i found, i also backed up stock recovery since i booted twrp not flashed, im gonna make the stock rom flashable for twrp now, then an unbloated rom, we now need a development page for our device so it doesnt get messy, ill add twrp link after im 100% its working
I've Finally been able to install my Ported TWRP with Full Functionality (including the EMU.ko file and Touch screen)
Also, through TWRP, I am able to flash the Stock Image file for the tablet.
Here is my Screen -Record https[:]//youtu.be/UpRFqTejF9U
Sorry that I am unable to upload the TWRP-Ported.img file, does not allow me here and my bandwidth is quite limitted.
My next plan is booting a Full GNU Linux, wish me luck.
arjaylzo said:
I've Finally been able to install my Ported TWRP with Full Functionality (including the EMU.ko file and Touch screen)
Also, through TWRP, I am able to flash the Stock Image file for the tablet.
Here is my Screen -Record https[:]//youtu.be/UpRFqTejF9U
Sorry that I am unable to upload the TWRP-Ported.img file, does not allow me here and my bandwidth is quite limitted.
My next plan is booting a Full GNU Linux, wish me luck.
Click to expand...
Click to collapse
For that im certain that you need to access the UEFI to disable secure boot, but first you need to make a backup of the EMMC partitions in order to restore back to android, theres also a few things that can be done to easily dual boot this device with another OS like Ubuntu, accessing UEFI with keyboard and keypressing is impossible since by default the option to enable keyboard is disabled, a way of getting to UEFI is to flash the stock rom on twrp (with edited script to flash and fail on uefi update), and when it fails and goes to shell mode you connect keyboard simply type exit and it shows secure boot option, and option to enter UEFI, from there you can boot whatever you want.. I could try to get reefind (a boot manager allows to dualboot in case u didnt know) but i need root.. i made the unsecboot myself but can never seem to be able to get root working without making the rom unbootable.. can you tell me how you did it?
I managed to get into UEFI, Able to boot several UEFI files such as grub.uefi even Windows bootx64, eventually giving out Errors during Linux Mint/debian and Ubuntu installation. Also cleared security footer in UEFI thereby getting a Prompt to Press +Vol whenever I start. So this time, my boot loader has been unlucked and secure boot is OFF for good
I even was able to FLash these UEFI images. FIrst with Linux, I extracted bootloader.img from the Stock zip coming from acer. Mounted the IMG file (I am using Linux) and replaced loader.img and also replaced efi/boot/bootx64.efi with the Grub.efi
I then unmount the IMG and flash it via
Entering DNX mode
Fastboot boot loader.img
Fastboot flash bootloader bootloader.img(which contains grub.efi)
Viola, I instantly am able to boot to Grub commandline. I am able to map my OTG Flashdrive and Boot vmlinuz and initrd. But later fails.
Turns out, the port to which the USB is under USB3 Only that the 4 pins are setup, not the additional pins for common USB3 pins.
So, as soon as windows Launch the WinPe environment, my OTG powered Hub, USB uefi enabled installer and keyboard shutsdown and stuck on the Welcome WIndows installation.
Same goes for the Linux live installer. As soon as the RootFS is loaded in the Memory and launch the Init process, the USB's quit working leading to "Missing Live squashFS".
So then I resorted with Copying the Linux installers into the /system folder. Yes I have /system RW capability since my tablet has been rooted.
Going back to the Windows Installation. I got an ACPI error. Thereby went into UEFI again and Adjusted ACPI_O5 to O4, was able to get into the welcom Installation. Still, no KB or mouse. An unattended Installation could have helped but I no longer have the resource to create Win10 unAttended plus I'ts hard to setup the Partition as I intend to install it permanently into the MMC or SD card if possible.
Worse, I made adjustment into the UEFI hoping to convert USB3 setting into legacy, As I rebooted my device, I no longer have OTG on Android, SD card no longer mounted. So that concludes that the SD card is also allocated towards the USB bridge.
This calls for a UEFI/BIOS Reset. Which I did. I then Booted TWRP and Sideload the AV0L0 stock image.zip, went through the usual flashing. But was getting error mounting some partitions. I went in and flash instead. This time i'ts slowly getting worse.
I tried re-flashing the tablet using the stock AVOLO.zip file. I thought re-locking bootloader would help since it kinda makes changes into the UEFI. So I did relock the tablet. After re-locking, I flashed the AVOLO and finally ended the life of this one. I went into a Bootloop, though DNX is still accessible. But not a chance to flash UEFI or atleast bootloader. Plus, no KB and OTG working.
I tore apart my Predator 8. Inside was pretty nifty, I removed the Main battery terminal. Let it sit for 15 mins as I smoke in desperation. While the Battery Terminal was removed, I also pressed the Power Button and Kept it press for a minute.
Time to re-assemble. Put back the battery terminal, powered on the unit, went into Recovery (twrp touch enable) plug in FlashDrive.
I've seen my FD was mounted. I was relieved. Plugged in Mouse, I saw my cursor in there. This indicates that I am able to Reset my UEFI. Also kinda Re-calibrated my battery as It was stuck on 25% since I rooted the devices. No it never went up since then. When I check to charge the table, it now showed 100%
Using Intel Flash was one of my option in totally forgetting about Android on this tablet. But, I no longer have Flashing to bootloader capability as during the re-installation of the AVOLO file to get into error, it reboot the Tablet. Thus until the time of my writing, it is rebooting upon showing the crappy Acer logo.
Again, I tore out the tablet. I was hoping the battery was just rather weak being at 4.11V where it's rating is at 4.38V. I will try to charge the unit for couple of hours. Note that when I plug the charger into the tablet, it triggers the tablet to power-on. I am guessing its the part of the AVOLO flash sequence to update bios, but since it has a weak battery, it shutsdown and goes into a loop. But luckly, I am able to charge the tablet without the Android "charger" interface, must have been corrupted by now.
I did check on the battery terminal, made a comparison. It does increases a little bit when I plug the chargers. so so sure is its charging. It's 3 in the morning and has been on this since the other night.
Shame that this tablet has so much potential but lacks the resource. Other Tablet has their respective forums, chuwi and teclas are even better.
Soon I hope that I will sort this out and upload another Video for this device booting into Linux or Windows.
I forgot to mention, I got into the UEFI by deliberately erasing bootloader partition, I was confident that I'de still be able to boot the device via DNX mode and into it's OEM fasboot mode. I got into the shell, typed exit. It then shows me the Setup Utility and Option to boot from device or option to boot from File.
arjaylzo said:
I forgot to mention, I got into the UEFI by deliberately erasing bootloader partition, I was confident that I'de still be able to boot the device via DNX mode and into it's OEM fasboot mode. I got into the shell, typed exit. It then shows me the Setup Utility and Option to boot from device or option to boot from File.
Click to expand...
Click to collapse
it really seems like your just ignoring the replies im giving, please take a bit of time and read replies ive sending, ive ported the TWRP 3.0.2, so its not using the older one, 2.8.7, and i was also able to boot into uefi, i could also try to get something another bootloader very easily to be able to multiboot different OS'es, since my other tablet uses an intel cpu and process is the same, all i need now, is to know how did you root this device? whever i try to root this device it allways falls into a bootloop or if i manualky push files it constantly says binaries need an update and it fails everytime to update.. just tell me how you did it..
---------- Post added at 12:20 AM ---------- Previous post was at 12:14 AM ----------
arjaylzo said:
I managed to get into UEFI, Able to boot several UEFI files such as grub.uefi even Windows bootx64, eventually giving out Errors during Linux Mint/debian and Ubuntu installation. Also cleared security footer in UEFI thereby getting a Prompt to Press +Vol whenever I start. So this time, my boot loader has been unlucked and secure boot is OFF for good
I even was able to FLash these UEFI images. FIrst with Linux, I extracted bootloader.img from the Stock zip coming from acer. Mounted the IMG file (I am using Linux) and replaced loader.img and also replaced efi/boot/bootx64.efi with the Grub.efi
I then unmount the IMG and flash it via
Entering DNX mode
Fastboot boot loader.img
Fastboot flash bootloader bootloader.img(which contains grub.efi)
Viola, I instantly am able to boot to Grub commandline. I am able to map my OTG Flashdrive and Boot vmlinuz and initrd. But later fails.
Turns out, the port to which the USB is under USB3 Only that the 4 pins are setup, not the additional pins for common USB3 pins.
So, as soon as windows Launch the WinPe environment, my OTG powered Hub, USB uefi enabled installer and keyboard shutsdown and stuck on the Welcome WIndows installation.
Same goes for the Linux live installer. As soon as the RootFS is loaded in the Memory and launch the Init process, the USB's quit working leading to "Missing Live squashFS".
So then I resorted with Copying the Linux installers into the /system folder. Yes I have /system RW capability since my tablet has been rooted.
Going back to the Windows Installation. I got an ACPI error. Thereby went into UEFI again and Adjusted ACPI_O5 to O4, was able to get into the welcom Installation. Still, no KB or mouse. An unattended Installation could have helped but I no longer have the resource to create Win10 unAttended plus I'ts hard to setup the Partition as I intend to install it permanently into the MMC or SD card if possible.
Worse, I made adjustment into the UEFI hoping to convert USB3 setting into legacy, As I rebooted my device, I no longer have OTG on Android, SD card no longer mounted. So that concludes that the SD card is also allocated towards the USB bridge.
This calls for a UEFI/BIOS Reset. Which I did. I then Booted TWRP and Sideload the AV0L0 stock image.zip, went through the usual flashing. But was getting error mounting some partitions. I went in and flash instead. This time i'ts slowly getting worse.
I tried re-flashing the tablet using the stock AVOLO.zip file. I thought re-locking bootloader would help since it kinda makes changes into the UEFI. So I did relock the tablet. After re-locking, I flashed the AVOLO and finally ended the life of this one. I went into a Bootloop, though DNX is still accessible. But not a chance to flash UEFI or atleast bootloader. Plus, no KB and OTG working.
I tore apart my Predator 8. Inside was pretty nifty, I removed the Main battery terminal. Let it sit for 15 mins as I smoke in desperation. While the Battery Terminal was removed, I also pressed the Power Button and Kept it press for a minute.
Time to re-assemble. Put back the battery terminal, powered on the unit, went into Recovery (twrp touch enable) plug in FlashDrive.
I've seen my FD was mounted. I was relieved. Plugged in Mouse, I saw my cursor in there. This indicates that I am able to Reset my UEFI. Also kinda Re-calibrated my battery as It was stuck on 25% since I rooted the devices. No it never went up since then. When I check to charge the table, it now showed 100%
Using Intel Flash was one of my option in totally forgetting about Android on this tablet. But, I no longer have Flashing to bootloader capability as during the re-installation of the AVOLO file to get into error, it reboot the Tablet. Thus until the time of my writing, it is rebooting upon showing the crappy Acer logo.
Again, I tore out the tablet. I was hoping the battery was just rather weak being at 4.11V where it's rating is at 4.38V. I will try to charge the unit for couple of hours. Note that when I plug the charger into the tablet, it triggers the tablet to power-on. I am guessing its the part of the AVOLO flash sequence to update bios, but since it has a weak battery, it shutsdown and goes into a loop. But luckly, I am able to charge the tablet without the Android "charger" interface, must have been corrupted by now.
I did check on the battery terminal, made a comparison. It does increases a little bit when I plug the chargers. so so sure is its charging. It's 3 in the morning and has been on this since the other night.
Shame that this tablet has so much potential but lacks the resource. Other Tablet has their respective forums, chuwi and teclas are even better.
Soon I hope that I will sort this out and upload another Video for this device booting into Linux or Windows.
Click to expand...
Click to collapse
I think we need to somehow work togueter, the things you have been making its things ive done very easily, the only thing i wasnt able to do is root the device, other than that, i was able to boot TWRP 3.0.2, the so called unsec boot and few other things, i have an idea that is very safe that will allow to load a bootloader that gives you the power to choose if you want to boot with flash drive, android, or an .img stored on the tablet in order to dualboot android/linux/windows.. But what we dont need is youtube videos just showing you did stuff like that, its unnecessary, and you dont even give any kind of tutorial on how you did it.. if your not going to share anything and keep making useless youtube videos, just tell me how you rooted the device without it getting into a bootloop, and ill do the rest by my own.
Apologies for the lack of tutorial. Honestly I was teasing you, though I might have teased you too much. I am able to revive my tablet and eventually smoked the Display Driver chip. Tablet still boots into Grub (the last bootloader I had to get into the UEFI) and eventually slipped the Aluminum casing and poof, smoke came out of the chip. Moreover, here is how I did it. I will most likely unable to provide you the commandline from Fastboot at the moment as I am using a Diff PC to reply to you.
Key is, I did had a bootloop whenever I flash the ported TWRP recovery if I flash it as .img.
Instead, what I did is simply unpack the Teclast TWRP recovery using umkbootimg. So that gives me three things:
1 initramfs.cpio file
1 zImage file
and the commandline to repack the img.
"But I did not actually repack back to IMG"
I then replace the zImage file from the GT810, this makes the Touchscreen work
So, the secret was:
Fastboot -c fastboot -c 'loglevel=5 androidboot.hardware=cht_ffd firmware_class.path=/system/etc/firmware i915.fastboot=1 memmap=4M$0x5c400000 i915.i915_rotation=1 vga=current i915.modeset=1 drm.vblankoffdelay=1 enforcing=0 androidboot.selinux=permissive console=ttyS0,115200n8 bootboost=1 pm_suspend_debug=1 pstore.backend=ramoops' flash:raw zImage initramfs.cpio.gz boot zImage initramfs.cpio
Click to expand...
Click to collapse
- that should enable you to boot and test the new Recovery, Touch and all the rest should work. also check TWRP log screen for errors. If no error, then you can flash those "two files"
While you have the initramfs, modify the default.prop according to the GT-810's build prop. Especially the part where SKU and all the rest of values are indicated on the GT-810, there is no need to edit those init-RC files. Keep them as is.
Going back to the Flashing. So you have the Following:
1: GT810-initrd file
2: modified initramfs (which has the Gt-810 bulidprop contents pasted into the default.prop)
3: Commandline to repack the Teclast TWRP recovery.
Flashing part. Bear with me as I do not have my PC where I worked, but again, do not flash your TWRP recov as IMG. Rather flash it as RAW, and make sure to flash unsecboot first.
Here are my Root-files:
https://drive.google.com/drive/folders/0B9crbD0LpeifREFIbktQdldIcUU?usp=sharing
Click to expand...
Click to collapse
Make sure to unlock your bootloader. Flash the unsecboot.img first
fastboot flash boot unsecured_boot.img
Click to expand...
Click to collapse
The Fun part
fastboot -c 'loglevel=5 androidboot.hardware=cht_ffd firmware_class.path=/system/etc/firmware i915.fastboot=1 memmap=4M$0x5c400000 i915.i915_rotation=1 vga=current i915.modeset=1 drm.vblankoffdelay=1 enforcing=0 androidboot.selinux=permissive console=ttyS0,115200n8 bootboost=1 pm_suspend_debug=1 pstore.backend=ramoops' flash:raw zImage initramfs.cpio.gz
Click to expand...
Click to collapse
Reboot to Recovery (Power + Vol-UP, its the button closest to the power button)
flash the SU.zip file above.
there your go
I am out to buy another Predator tablet at the moment. Mine is half-gone. Later I'll post more details.
arjaylzo said:
Apologies for the lack of tutorial. Honestly I was teasing you, though I might have teased you too much. I am able to revive my tablet and eventually smoked the Display Driver chip. Tablet still boots into Grub (the last bootloader I had to get into the UEFI) and eventually slipped the Aluminum casing and poof, smoke came out of the chip. Moreover, here is how I did it. I will most likely unable to provide you the commandline from Fastboot at the moment as I am using a Diff PC to reply to you.
Key is, I did had a bootloop whenever I flash the ported TWRP recovery if I flash it as .img.
Instead, what I did is simply unpack the Teclast TWRP recovery using umkbootimg. So that gives me three things:
1 initramfs.cpio file
1 zImage file
and the commandline to repack the img.
"But I did not actually repack back to IMG"
I then replace the zImage file from the GT810, this makes the Touchscreen work
So, the secret was:
- that should enable you to boot and test the new Recovery, Touch and all the rest should work. also check TWRP log screen for errors. If no error, then you can flash those "two files"
While you have the initramfs, modify the default.prop according to the GT-810's build prop. Especially the part where SKU and all the rest of values are indicated on the GT-810, there is no need to edit those init-RC files. Keep them as is.
Going back to the Flashing. So you have the Following:
1: GT810-initrd file
2: modified initramfs (which has the Gt-810 bulidprop contents pasted into the default.prop)
3: Commandline to repack the Teclast TWRP recovery.
Flashing part. Bear with me as I do not have my PC where I worked, but again, do not flash your TWRP recov as IMG. Rather flash it as RAW, and make sure to flash unsecboot first.
Here are my Root-files:
Make sure to unlock your bootloader. Flash the unsecboot.img first
The Fun part
Reboot to Recovery (Power + Vol-UP, its the button closest to the power button)
flash the SU.zip file above.
there your go
I am out to buy another Predator tablet at the moment. Mine is half-gone. Later I'll post more details.
Click to expand...
Click to collapse
Alright, thus thing is a bit messed up. I send comments to you for another thread and then u send to this one its a bit of a mess, but anyway i was hoping that after you buy your tablet again, that you could try this TWRP and maybe try to fix a bug i couldnt fix? (backup folder name keeps changing), its a more updated version of TWRP, it does backup and install stock rom, but backups after being made and if you reboot twrp, twrp changes the folder name (/sdcard/TWRP/BACKUPS/18373829_thesechangeeveryreboot)) which makes it having the problem of transfering the backup to the new folder.. Link: http://forum.xda-developers.com/android/development/acer-predator-8-twrp-3-0-2-t3500801/page1 also i flashed everything with fastboot, and temporarily booted to twrp and made a backup of stock recovery.. also im trying to get refind to work, if we get this it should be very easy to put anything we want in here.. i tried once but forgot to disable secure boot and uefi failed to load refind_x64.efi ill try again this afternoon after i get back from school..
refind
I tried refind as well, tried three of these. The downloadable zip, ISO and I recall and the standalone efi file. With the secure_boot disabled, I only got into the fallback Grub Commandline and refind fails to identify bootable partitions including the EMMC:bootloader, SDCARD (Yes I have flagged by SD as Bootable, even has it's 100mb efi partition itself) and bootable USB via OTG. Couldn't make it work. While using Grub.efi from LInux Iso's works flawlessly. I made a couple of dumps. One of which was SMBIOS and devicetree, well not Android related but handy as I unravel the devices through it's core.
The store I went to no longer has stocks of the tablet at my price-range. Other do have but were 3x the Selling price. So not today, I guess.
Regarding the TWRP latest version you are working onto. I am not sure if it's necessary to have it, the older version worked for me flawlessly, primarily rooting the device, making backup and Instant ADB connection. Oh! Sideload doesn't work but not that much of a drawback.
The later part, the Tablet gets rooted using the old TWRP and I personally can't check as to why the folder changes. I recall, on the old version: the backup you made would create SKU+SystemTimeAndDate as the folder's filename. Thus you'd be able to distinguish which set of backup worked.
BE CAREFULL not to flash the Stock AVOLO firmware very often. Which was one of my perv. I had the instance where the Charging IC and UEFI/Bios chip gets out of sync and thereby the Battery gauge gets wrong Calibration.
I come to Discover how to Reset the UEFI chip as well as the EMMC chip in cases where The USB port gets disabled if you ever decide to tinker the USB configuration and UEFI. Or should there be a need to do so, such as in my case, the unit bootloops in 2sec as soon as the Acer logo and backlight comes on. Turns out that the Bootloader and UEFI update got corrupted. Worse part is, DNX also no longer works.
PLUS, I recommend not to CLEAR the UEFI Security Footer inside the UEFI, this part is Where Acer embedded their RSA security description. This part cannot be recovered and undone. If so, You will have a BootFlag or Notice to Press Vol+ twice whenever the unit is turned on. Well, that is if you go through the route of having android on this device.
But again, given that this is _x64 based hardware, we certainly can boot other os's, part missing on my end is how to go through these OS's installation without the USB3.0 deactivated when WinPe(windows) or InitRamFs(Linux) is executed.
Lastly, I have uploaded and provided a link to DL the Stock Recovery which is 30MB+ using DD from ADB. These Img's are now flashable IMG's.
arjaylzo said:
I tried refind as well, tried three of these. The downloadable zip, ISO and I recall and the standalone efi file. With the secure_boot disabled, I only got into the fallback Grub Commandline and refind fails to identify bootable partitions including the EMMC:bootloader, SDCARD (Yes I have flagged by SD as Bootable, even has it's 100mb efi partition itself) and bootable USB via OTG. Couldn't make it work. While using Grub.efi from LInux Iso's works flawlessly. I made a couple of dumps. One of which was SMBIOS and devicetree, well not Android related but handy as I unravel the devices through it's core.
The store I went to no longer has stocks of the tablet at my price-range. Other do have but were 3x the Selling price. So not today, I guess.
Regarding the TWRP latest version you are working onto. I am not sure if it's necessary to have it, the older version worked for me flawlessly, primarily rooting the device, making backup and Instant ADB connection. Oh! Sideload doesn't work but not that much of a drawback.
The later part, the Tablet gets rooted using the old TWRP and I personally can't check as to why the folder changes. I recall, on the old version: the backup you made would create SKU+SystemTimeAndDate as the folder's filename. Thus you'd be able to distinguish which set of backup worked.
BE CAREFULL not to flash the Stock AVOLO firmware very often. Which was one of my perv. I had the instance where the Charging IC and UEFI/Bios chip gets out of sync and thereby the Battery gauge gets wrong Calibration.
I come to Discover how to Reset the UEFI chip as well as the EMMC chip in cases where The USB port gets disabled if you ever decide to tinker the USB configuration and UEFI. Or should there be a need to do so, such as in my case, the unit bootloops in 2sec as soon as the Acer logo and backlight comes on. Turns out that the Bootloader and UEFI update got corrupted. Worse part is, DNX also no longer works.
PLUS, I recommend not to CLEAR the UEFI Security Footer inside the UEFI, this part is Where Acer embedded their RSA security description. This part cannot be recovered and undone. If so, You will have a BootFlag or Notice to Press Vol+ twice whenever the unit is turned on. Well, that is if you go through the route of having android on this device.
But again, given that this is _x64 based hardware, we certainly can boot other os's, part missing on my end is how to go through these OS's installation without the USB3.0 deactivated when WinPe(windows) or InitRamFs(Linux) is executed.
Lastly, I have uploaded and provided a link to DL the Stock Recovery which is 30MB+ using DD from ADB. These Img's are now flashable IMG's.
Click to expand...
Click to collapse
my twrp does all that too.. one of the only problems is that it backups, but if you reboot the supposed serialnumber(deviceid of /TWRP/BACKUPS/929293/ changes every reboot, if it wasnt for that i guess it would be better than the old one, and supports much better themes.. Also ive tried unpacking system from stock image i can never make it boot.. it never boots.. what could it be?