I was running Cyanogenmod 10.2 official (stable build) on my GS3. I decided to flash Paranoid Android 3.99 RC2.
Followed the procedures correctly, did as follows:
Factory reset
Wipe cache
Wipe dalvik cache
I then flashed the Paranoid Android rom, but didn't flash the gapps package.
Everything seemed to work fine, except the WiFi didn't connect to the networks. I tried several networks, but it failed to connect.
It asks for the password, once entered, it says "Saved" and that's it. It doesn't connect.
Can anyone please help me get rid of the problem? I googled, but I didn't find anyone having a similar problem.
Do I need to flash gapps to make WiFi work properly, or is it something else causing the problem?
{no username()} said:
I was running Cyanogenmod 10.2 official (stable build) on my GS3. I decided to flash Paranoid Android 3.99 RC2.
Followed the procedures correctly, did as follows:
Factory reset
Wipe cache
Wipe dalvik cache
I then flashed the Paranoid Android rom, but didn't flash the gapps package.
Everything seemed to work fine, except the WiFi didn't connect to the networks. I tried several networks, but it failed to connect.
It asks for the password, once entered, it says "Saved" and that's it. It doesn't connect.
Can anyone please help me get rid of the problem? I googled, but I didn't find anyone having a similar problem.
Do I need to flash gapps to make WiFi work properly, or is it something else causing the problem?
Click to expand...
Click to collapse
Have u tried reflashing? Or manually pressing connect?
Sent from my GT-I9300.
Give a thank if i helped you.
Tried re-flashing several times, its giving the same problem
Sent from my Nexus 4 using xda app-developers app
{no username()} said:
Tried re-flashing several times, its giving the same problem
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Manually connecting? Try flashing gapps with the rom?
Sent from my GT-I9300.
Give a thank if i helped you.
I've tried connecting to several networks. I even tried connecting to my mobile hotspot (which didn't require a security pin), it gave the same error.
I haven't tried flashing gapps. Do you think flashing gapps would work?
Sent from my Nexus 4 using xda app-developers app
{no username()} said:
I've tried connecting to several networks. I even tried connecting to my mobile hotspot (which didn't require a security pin), it gave the same error.
I haven't tried flashing gapps. Do you think flashing gapps would work?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Idk. Its worth a try though. If it still doesn't work. It maybe ur network adapter.
Sent from my GT-I9300.
Give a thank if i helped you.
Are you talking about the network adapter on the phone? If you are, I re-flashed the Cyanogenmod 10.2 and it started working again. WiFi even worked on the stock rom flawlessly.
Sent from my Nexus 4 using xda app-developers app
{no username()} said:
Are you talking about the network adapter on the phone? If you are, I re-flashed the Cyanogenmod 10.2 and it started working again. WiFi even worked on the stock rom flawlessly.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Then shld be a bad download of paranoid android. Cos i used the version u tried to use and it was working.
Sent from my GT-I9300.
Give a thank if i helped you.
Do you think Cyanogenmod, which I'm upgrading from, causing problem?
Sent from my Nexus 4 using xda app-developers app
{no username()} said:
Do you think Cyanogenmod, which I'm upgrading from, causing problem?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Well tat might be the problem. Try gg to stock then to pa
Sent from my GT-I9300.
Give a thank if i helped you.
{no username()} said:
I was running Cyanogenmod 10.2 official (stable build) on my GS3. I decided to flash Paranoid Android 3.99 RC2.
Followed the procedures correctly, did as follows:
Factory reset
Wipe cache
Wipe dalvik cache
I then flashed the Paranoid Android rom, but didn't flash the gapps package.
Everything seemed to work fine, except the WiFi didn't connect to the networks. I tried several networks, but it failed to connect.
It asks for the password, once entered, it says "Saved" and that's it. It doesn't connect.
Can anyone please help me get rid of the problem? I googled, but I didn't find anyone having a similar problem.
Do I need to flash gapps to make WiFi work properly, or is it something else causing the problem?
Click to expand...
Click to collapse
Same problem here with fusion aosp rom. Anyone got a solution for this? My house wifi work flawless with other rom but with liquid and fusion rom after inserting wpa key it says saved but cant connect...
I had the same issue and it worked after I flashed this fix...
http://forum.xda-developers.com/showpost.php?p=44385381&postcount=28&nocache=1&z=7811971486080438
I think its an issue with CM 10.2 carried over to PA.
Related
This is the pre-alpha thread of OmniROM for the Samsung Galaxy Note 2 (i605). More information can be found here.
This build is very bare bones at the moment. Don't let flashing this now turn you down from trying it again in the future, a lot of changes are coming soon. I would still consider this much more of a tester than a daily driver unless bare bones is your style. The rom is very smooth and fast though probably for that very same reason.
Source:
https://github.com/omnirom
https://gerrit.omnirom.org/#/q/status:open,n,z
https://github.com/omnirom-slickrick
What doesn't work:
You tell me!
Installation method:
Wipe all if coming from another rom
Flash OmniROM
Flash GApps
Reboot
This rom does not come with root by default. Flash SuperSU in recovery if you want root!
Flash at your own risk! No one else is responsible if your device bursts into flames
To try out multiwindow, go to recents and long press an app. Click add to split view and repeat to add another app. Keep in mind its still buggy at the moment
Have fun and enjoy!
For "pre-alpha" this is a very solid stripped to the basics AOSP ROM. Obviously features like customizing and themes will get added in but for now this is pretty good. Basic stuff like wifi, bluetooth, phone, etc are working on my end here. Looking forward to seeing where this ROM goes. Will be keeping my eyes on this.
Excited to see this come together.
Sent from my SCH-I605 using xda app-developers app
Wish I could get this working on T-Mobile. Zip fails in recovery. Any ideas? TIA
Sent from my SGH-T889 using xda app-developers app
dagod80 said:
Wish I could get this working on T-Mobile. Zip fails in recovery. Any ideas? TIA
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I tried messing with the updater script to match that of a tmobile note2, but didnt work
I really want to try this :crying:
Boo so excited for 4.3... my socks are wet
ssmr2t said:
I tried messing with the updater script to match that of a tmobile note2, but didnt work
I really want to try this :crying:
Click to expand...
Click to collapse
There's a working art version on RootzWiki
Sent from my GT-N7105 using xda app-developers app
im definitely excited about seeing this rom come rogether in the future! thanks Rick!
I am not able to get data on this rom.
I have Baseband version Unknown.
As mentioned here, I made sure I am using the latest TWRP... Any ideas?
Taken from here...
Pilatus47 said:
Try to flash the last Rom with the working baseband. And then flash Omni.
Saludos
Click to expand...
Click to collapse
Dirty flash on top of an existing rom with working data? I will try over CM 10.2 to see if that works.
Update: That was a no go. Stuck at boot...
R-Rizzo said:
Are you flashing any LTE fix zip?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
I am afraid I have not seen that zip. Is it the one found here?
Update: Tried this and the apns-conf.xml from slick_rick found here just to see if it would resolve the issue but still a no go...
Click to expand...
Click to collapse
PapaJohnMc said:
I am not able to get data on this rom.
I have Baseband version Unknown.
As mentioned here, I made sure I am using the latest TWRP... Any ideas?
Taken from here...
Click to expand...
Click to collapse
yeah i couldn't get data to show up, but I'm okay with that the rom was definitely smooth and I'll have to try it out again soon. thank you Rick! you kick ass like always
That's weird that data isn't working. If you can grab a logcat please.
Sent from my Nexus 7 using Tapatalk 4
slick_rick said:
That's weird that data isn't working. If you can grab a logcat please.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Here is what I have. I haven't done a logcat in quite some time. Hope this helps!
Thanks
This is my daily driver so I am flashing back to CM 10.2 for now... Gotta be accessible.
slick_rick said:
That's weird that data isn't working. If you can grab a logcat please.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I'll have to restore my nan and run a log.
EDIT: here's my logcat @slickrick
EDITdos: if that's not enough I'll run another logcat just let me know!
Any progress on the data issue? I tried again and still a no-go on data.
Thanks!
sorry to bring up a semi old thread, but i wonder if because i flashed omni using twrp 2.6.3.0 that's why i didn't have data... ima try with cwm and see if i have data then
EDIT: yup that didn't fix my radio issues..
Data working
When I did a normal flash with or without gapps no data & SU and "unknown baseband". Flash rom then gapp, then SU let boot, then boot back into TWRP & make a backup in TWRP only of "system" and "data". Flash CM 10.2 nightly & gapps allow data to lock and also open maps and allow GPS to lock. Reboot back into TWRP & restore the previous Omni / gapps / SU backup. Wipe dalvik & cache, reboot and everything should be good to go.
The rom has been very stable with no reboots & multi window works well.
The only issue I have experienced is a buzzing sound on call bluetooth on callers side until complete connection occurs.
Looking Good!
sent from Note 2 i605 running Omnirom pre-alpha with data.
Bluetooth
dturneys said:
When I did a normal flash with or without gapps no data & SU and "unknown baseband". Flash rom then gapp, then SU let boot, then boot back into TWRP & make a backup in TWRP only of "system" and "data". Flash CM 10.2 nightly & gapps allow data to lock and also open maps and allow GPS to lock. Reboot back into TWRP & restore the previous Omni / gapps / SU backup. Wipe dalvik & cache, reboot and everything should be good to go.
The rom has been very stable with no reboots & multi window works well.
The only issue I have experienced is a buzzing sound on call bluetooth on callers side until complete connection occurs.
Looking Good!
sent from Note 2 i605 running Omnirom pre-alpha with data.
Click to expand...
Click to collapse
I wiped cache and dalvik rebooted and reconnected bluetooth and everything is good.
dturneys said:
When I did a normal flash with or without gapps no data & SU and "unknown baseband". Flash rom then gapp, then SU let boot, then boot back into TWRP & make a backup in TWRP only of "system" and "data". Flash CM 10.2 nightly & gapps allow data to lock and also open maps and allow GPS to lock. Reboot back into TWRP & restore the previous Omni / gapps / SU backup. Wipe dalvik & cache, reboot and everything should be good to go.
The rom has been very stable with no reboots & multi window works well.
The only issue I have experienced is a buzzing sound on call bluetooth on callers side until complete connection occurs.
Looking Good!
sent from Note 2 i605 running Omnirom pre-alpha with data.
Click to expand...
Click to collapse
This worked for me! Thanks!
Sorry
Sorry, I am going to be "that guy" who proves my ignorance. I would love having the OMNI rom on my i605, but I couldn't get data or voice working. I saw the whole thing about backing up and restoring but I could not get that to work either. Are you working on a 4.3 or 4.4 release?
Thanks
I've had no luck with KitKat getting provisioned properly. Every time it shows no MIN or Mdn out prl. I can flash back to twrp and restore slimbean and have no connection issues. I've successfully flashed stock mc3 in cwm and gotten service then tried cm11 and no luck.
Anyone have any suggestions?
Use cwm recovery for kitkat
Sent from my SCH-I605 using XDA Premium 4 mobile app
Use CWM
nikhil.kdhand said:
Use cwm recovery for kitkat
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I did. I was in twrp on slimbean. Flashed CWM touch, booted into CWM recovery. From there I factory reset and wiped system. Flashed CM11, PA_GAPPS 4.4 12/12/13 and had no service. Flashed Beans stock mc3 in CWM and had signal. Then tried CM11 again after having service in CWM with stock. At this point I'm back in TWRP with Slimbean.
Thanks in advance!
Hope you are using cm11 which is 2611 built
Sent from my SCH-I605 using XDA Premium 4 mobile app
cm11
nikhil.kdhand said:
Hope you are using cm11 which is 2611 built
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I previously had the same issue with the 2611 build and I'd now happening on the 12-9 build
Same Issue
Currently having the issue, i am always stuck in roaming and after surfing the web about the issue following some other phone guides as well i am still having the issue, after flashing kitkat, still no service. I also went back to stock and reset the phone as well, also tried doing a refresh on the antenna as well still no cigar.
problem solved!
joshsikora said:
Currently having the issue, i am always stuck in roaming and after surfing the web about the issue following some other phone guides as well i am still having the issue, after flashing kitkat, still no service. I also went back to stock and reset the phone as well, also tried doing a refresh on the antenna as well still no cigar.
Click to expand...
Click to collapse
After some thinking, I noticed that the mj9 stock ROM was available. I odin'd back to stock, ran casual, used odin to flash twrp 2.6.3.1, flashed beanstown stock odexed mj9 ROM. After verifying signal, I did factory reset from twrp, and installed sbrissen 12-9 ota 4.4 ROM and gapps 12-13. Success. Going to backup and try slimkat next, but thought I'd update you all.
Hi there,
My SIII i9300 has been rooted and flashed with CM from CM 10.x to 11.x. Hoewever, recently it started to not give any audio during voice calls trough the normal mic. Speakers do work.
So, i've tried reflashing, clearing cache / dalvik etc. To no avail.
I then tried stock rom and for some reason this seems to do the trick.
As i'm not really a great fan of the Samsung bloatware and the 'awesome' skin overlay of samsung i would like to fix this issue.
I also tried some different roms to no avail. ( Also, i installed cm 10.2 because that used to be working fine)
I then tried installing different modems via CWM and ODIN. (BUELK1) and (CEEL1). It's a dutch phone on vodafone.
Any information would be greatly appreciated!
Btw, currently i'm running CM 11 nightly see below. Android 4.4.2
My baceband is currently i9300CEELL1
Kernel version 3.0.64-CM-gb1c5066
CM 11-20140228
greetinges, Volc
Try installing the ROM before wiping everything, including System ( data is recommended, as long as you don't have something important not backed up). And with 4.4 try to use MK6 modem or higher.
Sent from my GT-I9300 using XDA Premium 4 mobile app
?
Andr3y29 said:
Try installing the ROM before wiping everything, including System ( data is recommended, as long as you don't have something important not backed up). And with 4.4 try to use MK6 modem or higher.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi Andry!
Many thanks for your reply. So I should turn back stock, install cm and that mk6 without wiping? I'm not sure if cm will install without the wipe..
The mk6 modem, do you have any clue where to search it?
Regards,volc
volcomoo said:
Hi Andry!
Many thanks for your reply. So I should turn back stock, install cm and that mk6 without wiping? I'm not sure if cm will install without the wipe..
The mk6 modem, do you have any clue where to search it?
Regards,volc
Click to expand...
Click to collapse
I thought you found the modems on www.boeffla-kernel.de . You can find them in the Download section. Also, if you are on CM11 (or any other ROM actually), you should download the ROM tog want to flash on your external SD Card, reboot into recovery, wipe system, cache, dalvik cache and data, flash the ROM, reboot system and use it for a few moments at least ( I would recommend you do that so that you won't get bootloop). Then, reboot into download mode, connect phone to Odin and flash the ROM. I would recommend wipe shading cache and dalvik cache, just for a flawless experience.
Sent from my GT-I9300 using XDA Premium 4 mobile app
I saw this phone firsthand. (Hi volcomoo!)
The roms were flashed OK, double triple quadruple wiping probably wont make any difference.
The weird thing is that with CM installed there seems to be a hardware issue, when we flash the phone back to stock, everything works. I guess the developers will say "logcat or it didn't happen"....
sodeknetters said:
I saw this phone firsthand. (Hi volcomoo!)
The roms were flashed OK, double triple quadruple wiping probably wont make any difference.
The weird thing is that with CM installed there seems to be a hardware issue, when we flash the phone back to stock, everything works. I guess the developers will say "logcat or it didn't happen"....
Click to expand...
Click to collapse
Heuj Sodeknetters
Flashing the MK6 modem didn't work either. Tried dozens of roms. Anyone else might have a clue?
My google foo turned into dust so xda is all i got left ^^
We need to make a logcat of when it fails i guess
I had this problem before when i was runming stock . i just sent with the flow and after a month or so i got fixed by itself .
Hope i helped
Sent from my GT-I9300 using xda app-developers app
I tried the CM11 and AOSX, on both of them I am having the same problem. Though I have setted the APN up, the mobile data is not working. I tried the app Tweak APN but not worked either. Is there any fix about this issue or any solution that someone can help? Thanks.
balanced_emotions said:
I tried the CM11 and AOSX, on both of them I am having the same problem. Though I have setted the APN up, the mobile data is not working. I tried the app Tweak APN but not worked either. Is there any fix about this issue or any solution that someone can help? Thanks.
Click to expand...
Click to collapse
Try following:
Go to settings - security - and there you candelete your SIM Pin. After deleting try wether it works or not and if not, boot into CWM and wipe cache, data and dalvik cache
lol98lol98 said:
Try following:
Go to settings - security - and there you candelete your SIM Pin. After deleting try wether it works or not and if not, boot into CWM and wipe cache, data and dalvik cache
Click to expand...
Click to collapse
I am not using any SIM Pin. I tried wiping all many times. Tried a lot of tricks actually. I installed 3 different roms but none of those KitKats worked with mobile data. On Sony Stock based roms I have no problem. I let it to download the internet settings then it works.
I feel so sad that I won't be able to use it
Use the same apn stock rom auto downloads. Copy it word to word from that.
Sent from my Xperia P using Tapatalk
5865998936
Hamza Murad said:
Use the same apn stock rom auto downloads. Copy it word to word from that.
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
Nope, not working again. The mobile data looks like not functioning. It turns on and off so easily. Whenever I turn it on or off on ICS or JB the phone hangs for less than a second, but on KitKat gives the feeling like it is not woking.
Should I flash it over an earlier version of CM like CM10 or something? On the other hand, I format the system.
Just dont know how to get over it.
I tried other CM roms. My mobile data is not working on any of them. It is working on stock and stock based roms. I tried to set the apn settings on stock rom manually and it worked. bu ton cm roms it is not working..
I used to have an X10 mini, it was working fine on all roms. But on this Sola I have this problem.
What is the problem? Is there anyone can help me about it?
Any chance someone can port this for use with our 900P?
http://forum.xda-developers.com/showthread.php?t=3170934
Thanks!
Sent from my hltespr using XDA Free mobile app
sixshooterz said:
Any chance someone can port this for use with our 900P?
http://forum.xda-developers.com/showthread.php?t=3170934
Thanks!
Sent from my hltespr using XDA Free mobile app
Click to expand...
Click to collapse
I've got my phone working on Cricket And have used that rom. I had to edit the build prop for it to flash
Sent from my SM-N910F using Tapatalk
wormy987123 said:
I've got my phone working on Cricket And have used that rom. I had to edit the build prop for it to flash
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
I managed to get it to flash but upon boot, it hung. I tried flashing a KK CM kernel and achieved the same result and restored back to a CM12.1 ROM. I'm going to mess with it a little more tonight.
Thanks for the feedback!
sixshooterz said:
I managed to get it to flash but upon boot, it hung. I tried flashing a KK CM kernel and achieved the same result and restored back to a CM12.1 ROM. I'm going to mess with it a little more tonight.
Thanks for the feedback!
Click to expand...
Click to collapse
I had to restart once, it hung on first boot. After that it booted fine. I ran it for a few hours but not my kinda rom. The CM kernel will hang it's samsung based
Sent from my SM-N910F using Tapatalk
How did you get it to boot?
This ROM boots without issue. No need to change kernels or anything else. That said, after booting I do not have any voice or data services available. I tried restoring the Sprint APN and, although it shows up, I still can't get connected to the Sprint network.
EDIT: Whenever I flash a new ROM, my method is always wipe system, data, dalvik cache, and cache 3 times then reboot to recovery and proceed with flashing as normal. With this ROM, after the first boot it seems to hang. Press and hold power til it reboots then you'll see the MIUI boot animation.
Sent from my hltespr using XDA Free mobile app