Related
I have been reading around here a few hours, but I haven't found exactly what I'm looking for, So I thought I'd ask.
Here is what I have:
Safestrap version:3.65
Baseband Version: I545VRUAME
Kernel: 3.4.0-690088
Build Number: JDQ39.I545VUAME7
Rooted Stock Rom running 4.2.2
I am looking to update to 4.4.x, and be rooted.
Preferable to have CM, but not necessary.
Do need root, for a few of the tweaks/apps I use every day.
I have seen that there are odin files to upgrade to 4.4.3 directly, but it seems cloudy whether or not it can actually be rooted after that.
I like the way safe strap has rom slots, but due to the large size of the roms, I could really only use one at a time any way. (what I am saying is that SS isn't necessary, just what I already know.)
Thank you, so much in advance.
aron7676 said:
I have been reading around here a few hours, but I haven't found exactly what I'm looking for, So I thought I'd ask.
Here is what I have:
Safestrap version:3.65
Baseband Version: I545VRUAME
Kernel: 3.4.0-690088
Build Number: JDQ39.I545VUAME7
Rooted Stock Rom running 4.2.2
I am looking to update to 4.4.x, and be rooted.
Preferable to have CM, but not necessary.
Do need root, for a few of the tweaks/apps I use every day.
I have seen that there are odin files to upgrade to 4.4.3 directly, but it seems cloudy whether or not it can actually be rooted after that.
I like the way safe strap has rom slots, but due to the large size of the roms, I could really only use one at a time any way. (what I am saying is that SS isn't necessary, just what I already know.)
Thank you, so much in advance.
Click to expand...
Click to collapse
You need to read the stickie in the general forum before you brick your phone... Not sure how you missed it.
sent via safestrap 3.72 and echo v25.1! !
Well I followed the instructions in this post (which was stickied) http://forum.xda-developers.com/showthread.php?t=2720163
and now all I am getting is "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help. "
Tried rebooting into download mode, and into recovery, neither would come up.
Anyone have some advice?
I would post in the forum I linked but I dont have enough posts under my belt to post in that category.
Oh, and in the top left side of the screen in red letters I see Secure Fail: kernel
Aaron
Got back into download mode.
Trying to flash I545VRUFNC5-AIO-incl-modem-hlos-nobootloaders-gogolie.tar again in the AP slot in odin.
Failed again.
Same Results as listed above.
now downloading the "The Complete Package - Absolutely everything you'll need in one .rar file."
Help upgrading from ME7 to NC5
I have the same problem as Aaron, Want to get to Rooted NC5
Can anyone let me to right post, Info etc........
I have been looking now for 3 Days Brick my phone 3 times :crying:
Thanks
To root on nc5, Google towelroot and install it. Open the app and just click make it rain to root
I need to Get to NC5, I'm Stuck on ME7..... I could take the OTA update, is this what You"all recommend ?
Everything I trey I get Bricked, I have to odin the ME7 Tar to un-brick
Capaints said:
I need to Get to NC5, I'm Stuck on ME7..... I could take the OTA update, is this what You"all recommend ?
Everything I trey I get Bricked, I have to odin the ME7 Tar to un-brick
Click to expand...
Click to collapse
You can't use OTA unless the phone is totally stock. You can upgrade by odin-flashing the no-wipe or full-wipe NC5 tar files that are in their own thread in the Android Development section
joshm.1219 said:
You can't use OTA unless the phone is totally stock. You can upgrade by odin-flashing the no-wipe or full-wipe NC5 tar files that are in their own thread in the Android Development section
Click to expand...
Click to collapse
Right now I'm completely Stock " odin ME7 full wipe tar" I have tried to odin to NC5 But No Luck, gets Bricked, have tried a few different files....
maybe You know a NC5 Full wipe or ??? I can odin to ?
I watched a couple YouTube videos on the Upgrade to Rooted NC5 with Super SU and still No Luck......
Need Help, Take the OTA update ? Thx
Capaints said:
Right now I'm completely Stock " odin ME7 full wipe tar" I have tried to odin to NC5 But No Luck, gets Bricked, have tried a few different files....
maybe You know a NC5 Full wipe or ??? I can odin to ?
I watched a couple YouTube videos on the Upgrade to Rooted NC5 with Super SU and still No Luck......
Need Help, Take the OTA update ? Thx
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2735172
Use this full wipe file and follow Surge's instructions. If you're using Odin 3.10 and having trouble, try rolling back to 3.09
joshm.1219 said:
http://forum.xda-developers.com/showthread.php?t=2735172
Use this full wipe file and follow Surge's instructions. If you're using Odin 3.10 and having trouble, try rolling back to 3.09
Click to expand...
Click to collapse
Thank You Joshm, that did it ! First try and Now on NC5
Now I need to Root it and load Safe Strap :good:
Capaints said:
Thank You Joshm, that did it ! First try and Now on NC5
Now I need to Root it and load Safe Strap :good:
Click to expand...
Click to collapse
Ok I just bought an S4 that is on ME7 and is Bone Stock. I need to get it to NC5 as well.
Can I use the Full Wipe File to get me to where I need to be? Just Want to do this the safe way.
---------- Post added at 01:54 PM ---------- Previous post was at 12:54 PM ----------
Ok I got impatient and tried this: http://forum.xda-developers.com/show....php?t=2735172
as was suggested up above. Luckily it worked first time out of the box and had Zero issues.
Thanks Guys!
i have a note 2 sch-i605 that is stuck at verizion logo what fiirmware & files do i need to reset this phone back to factory settings with odin? i also noticed in recovery mode i get failed to mount /efs error
No One has any idea's? ive tryed a few files with odin but always same thing stuck at verizon logo and will not go any were after that
cricket1969 said:
i have a note 2 sch-i605 that is stuck at verizion logo what fiirmware & files do i need to reset this phone back to factory settings with odin? i also noticed in recovery mode i get failed to mount /efs error
Click to expand...
Click to collapse
If you haven't found it yet, Droidstyle's guide should help you restore your phone. You can find the guide here: http://forum.xda-developers.com/showthread.php?p=34891181
Depending on what firmware version you were on (4.1.2, 4.3, or 4.4.2) you will want to restore the phone back to that firmware version that you were on. If you were on 4.4.2... then you can't downgrade down to 4.3 or any earlier firmware versions. Same goes for 4.3..can't downgrade to earlier builds. There are bootloader security measures in place that prevent downgrading.
I think Droidstyle's 4.1.2 firmware link is down.... so you can get 4.1.2 from XDA developer imnuts thread (under VRAMC3/Mirror 2) at this link: http://forum.xda-developers.com/showthread.php?p=35265728.
You can also get all the firmware files at Sammobile by clicking on this hyperlink HERE.
Hope this helps.
im on the nd7 firmware currently im thinking its the newest out so which one can i down grade to?
cricket1969 said:
im on the nd7 firmware currently im thinking its the newest out so which one can i down grade to?
Click to expand...
Click to collapse
Unfortunately... if you are on ND7, then you cannot downgrade... it will fail in Odin every time because of bootloader security measures that prevent reverting back to earlier firmware versions.
If you were on 4.4.2, then you can download the firmware for 4.4.2 ND7 from Sammobile and use Droidstyle's Restore guide to flash the 4.4.2 firmware (including the step of flashing the pit file). His guide should still work to help you restore the phone.
After the ODIN flash is complete and you see a pass message in Odin, then power the phone off and boot the phone back up into stock recovery. Then do a factory reset to make sure your getting everything wiped... as I don't believe Odin wipes everything thoroughly.
I rooted my s4 and installed twrp a long time ago used the phone for a little while then stashed it away. It had the following rom installed I545VRVFNC5 stock root oder I believe it was 4.4.2. The other night I installed flash fire and attempted to flash I545_OC1_Stock_rooted_rom mdk. It flashed ok but now I'm getting the verizon warning message and I can't bypass. I can no longer boot into twrp. I think the bootloader is still unlocked, padlock is unlocked upon boot. How do I get myself out of this message?
looneyk said:
I rooted my s4 and installed twrp a long time ago used the phone for a little while then stashed it away. It had the following rom installed I545VRVFNC5 stock root oder I believe it was 4.4.2. The other night I installed flash fire and attempted to flash I545_OC1_Stock_rooted_rom mdk. It flashed ok but now I'm getting the verizon warning message and I can't bypass. I can no longer boot into twrp. I think the bootloader is still unlocked, padlock is unlocked upon boot. How do I get myself out of this message?
Click to expand...
Click to collapse
Try to Odin back to MDK, if you had TWRP... If that doesn't work, nc5. You can't do custom ROM's like Cynanogenmod, but you have a limited amount of freedom with safestrap.
looneyk said:
I rooted my s4 and installed twrp a long time ago used the phone for a little while then stashed it away. It had the following rom installed I545VRVFNC5 stock root oder I believe it was 4.4.2. The other night I installed flash fire and attempted to flash I545_OC1_Stock_rooted_rom mdk. It flashed ok but now I'm getting the verizon warning message and I can't bypass. I can no longer boot into twrp. I think the bootloader is still unlocked, padlock is unlocked upon boot. How do I get myself out of this message?
Click to expand...
Click to collapse
The open padlock means the firmware you have installed is custom and not stock, doesn't mean your boot loader is unlocked. I would simply boot into download mode and re-image your device back to MDK, if that's where you were. What's your current boot loader version?
looneyk said:
I rooted my s4 and installed twrp a long time ago used the phone for a little while then stashed it away. It had the following rom installed I545VRVFNC5 stock root oder I believe it was 4.4.2. The other night I installed flash fire and attempted to flash I545_OC1_Stock_rooted_rom mdk. It flashed ok but now I'm getting the verizon warning message and I can't bypass. I can no longer boot into twrp. I think the bootloader is still unlocked, padlock is unlocked upon boot. How do I get myself out of this message?
Click to expand...
Click to collapse
Sent from my SCH-I545
SnyderGuy said:
The open padlock means the firmware you have installed is custom and not stock, doesn't mean your boot loader is unlocked. I would simply boot into download mode and re-image your device back to MDK, if that's where you were. What's your current boot loader version?
Sent from my SCH-I545
Click to expand...
Click to collapse
I am using an MDK S4.
I can bit to room, but cannot reboot to recovery.
Corrupted recovery after update via TWRP app.
How exactly, do I re-image my device back to MDK?
Do I use this stock MDK ROM? http://forum.xda-developers.com/gal...ment/rom-i545oc1-5-0-1-100-stock-mdk-t3097902
Do I put it in the BL or AP box in ODIN?
No, that is a ROM. You need the stock official software.
http://forum.xda-developers.com/showthread.php?t=2289325
SHOULD be that one...
Put that in AP
XxD34THxX said:
No, that is a ROM. You need the stock official software.
http://forum.xda-developers.com/showthread.php?t=2289325
SHOULD be that one...
Put that in AP
Click to expand...
Click to collapse
I just read it all. Looks like fun!
I sure would like to know what I did wrong. I only used the TWRP app to update TWRP.
pizza_pablo said:
I just read it all. Looks like fun!
I sure would like to know what I did wrong. I only used the TWRP app to update TWRP.
Click to expand...
Click to collapse
That I cannot answer since I do not have MDK. My assumption is a corrupted download of TWRP or a partial install that was interrupted for some reason.
XxD34THxX said:
That I cannot answer since I do not have MDK. My assumption is a corrupted download of TWRP or a partial install that was interrupted for some reason.
Click to expand...
Click to collapse
That may have been the case, since my connection was weak.
I'm just about to do the deed and I checked phone info and the bootloader is now I545VRUFNK4, vice MDK.
Here I go....
Well....I tried these to .tar files with no luck:
http://www.rwilco12.com/downloads.p...Galaxy S4 (Verizon) (SCH-I545)/Stock ROMs/TAR
https://www.androidfilehost.com/?fid=22979706399752783
I did get the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Now, I no longer have the option to cancel Download Mode and bot ROM.
I didn't want to do anything in Kies, for fear of taking an OTA.
Do I have any options?
Even just taking an OTA and selling a former MDK treasure?
This seems to be happening a lot. A LOT. Before you try kies, go into device manager and uninstall the Samsung USB drivers. Then download the DRIVERS ONLY from Sammobile/Samsung. THEN use Odin with a full wipe and repartition of MDK. If you get the same message again, then you have lost the MDK bootloader, and will have to repeat the process with an nc5 tar, which will loose custom ROMs, but you will have root and safestrap.
XxD34THxX said:
This seems to be happening a lot. A LOT. Before you try kies, go into device manager and uninstall the Samsung USB drivers. Then download the DRIVERS ONLY from Sammobile/Samsung. THEN use Odin with a full wipe and repartition of MDK. If you get the same message again, then you have lost the MDK bootloader, and will have to repeat the process with an nc5 tar, which will loose custom ROMs, but you will have root and safestrap.
Click to expand...
Click to collapse
OK. So I am going to uninstall Kies, just for safety sake. Uninstall the Samsung PC drivers. Reinstall the PC drivers.
Use ODIN to flash this http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung%20Galaxy%20S4%20%28Verizon%29%20%28SCH-I545%29/Stock%20ROMs/TAR in the AP box. Sacrifice a chicken and dance with snakes.
What do you think may have caused the bootloader to change?
At this point I guess any use of the phone will be a positive and somehow retaining MDK will be a miracle.
Thanks, for your assistance, as I am at a loss, at this point!
that is a .gz, so make sure to unip it/ delete that extension so Odin can use it.
My assumption is you may have accidently flashed the entire nk4, not just one with the MDK stuff still in.
XxD34THxX said:
that is a .gz, so make sure to unip it/ delete that extension so Odin can use it.
My assumption is you may have accidently flashed the entire nk4, not just one with the MDK stuff still in.
Click to expand...
Click to collapse
I used the link file, from my last post.
After I unzip it, delete the " .gz "
Got it. Thanks, again!
XxD34THxX said:
that is a .gz, so make sure to unip it/ delete that extension so Odin can use it.
My assumption is you may have accidently flashed the entire nk4, not just one with the MDK stuff still in.
Click to expand...
Click to collapse
So I just looked at the computer file and there was no .gz extention on the file I flashed thru ODIN.
It was not zipped, either.
On the xda page that you link, there was another choice on thier link. It was titled "one click". It is an .exe, titled "SCH-I545_MDK_562219_Stock_Restore.exe" .
What could ODIN do with this?
The other file I found, that I tried, but no change, was titled "VRUAMDK_NoWipe.tar.md5" .
Do you have any other suggestions,please?
Use the Full wipe in this thread:
http://forum.xda-developers.com/showthread.php?t=2301259
If that does not fix anything you have either
A)Hard Brick(unlikely since the device is semi-working)
B) lost MDK.
XxD34THxX said:
Use the Full wipe in this thread:
http://forum.xda-developers.com/showthread.php?t=2301259
If that does not fix anything you have either
A)Hard Brick(unlikely since the device is semi-working)
B) lost MDK.
Click to expand...
Click to collapse
I used this one, the other night, with no change, but this time I will delete Kies and phone drivers, then reinstall phone drivers, before ODIN.
You're a champ!
XxD34THxX said:
Use the Full wipe in this thread:
http://forum.xda-developers.com/showthread.php?t=2301259
If that does not fix anything you have either
A)Hard Brick(unlikely since the device is semi-working)
B) lost MDK.
Click to expand...
Click to collapse
Do I remove the .md5 extension as well as the .gz and just leave the .tar on the end?
ETA: Well, I tried removing both extensions and ODIN would not take it. Received error pop up.
I tried, with no success, ODIN flashing the full wipe and no wipe tars, with no success.
Giving up for the night.
XxD34THxX said:
This seems to be happening a lot. A LOT. Before you try kies, go into device manager and uninstall the Samsung USB drivers. Then download the DRIVERS ONLY from Sammobile/Samsung. THEN use Odin with a full wipe and repartition of MDK. If you get the same message again, then you have lost the MDK bootloader, and will have to repeat the process with an nc5 tar, which will loose custom ROMs, but you will have root and safestrap.
Click to expand...
Click to collapse
I woke up in the middle of the night and something popped into my head and I couldn't get back to sleep, so here we go....
The phone was on Echoe v49 which is Lollipop and I didn't like it. So I decided to go to the last Echoe version that was KitKat, v34.
I flashed this https://www.androidfilehost.com/?fid=95747613655044521 Which apparently is T-Mobile based, and the v20 international patch.
What popped into my head was that maybe my phone was thinking it was a T-Mobile S4, because I picked the wrong kernel. At the time everything seemed to work, except sending SMS. I could make phone calls and receive SMS.
This is was got me out of bed. I went to my notes for the Aroma install, to see what kernel I chose. I recalled picking the stock kernel, which may have been T-Mobile, but my notes say that I picked KTOONES kerenel in Aroma and in the Patcher, picked ADD VZW FILES AND BUILD PROP and NO KERNEL.
I was thinking that I had put a VZW version of TWRP onto a "T-Mobile" S4, getting me stuck to bootup in Download mode only, but still able to cancel Download and boot to system. Then I ODINed the VZW MDK stock firmware and am now with either Download mode or the yellow PC connected to phone screen, with the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I woke up thinking that maybe I had a T=mobile kernel and when I lost TWRP and only had stock recovery, downloaded the VZW version of TWRP on top of T=Mobile install. But the note makes it look like I would have been OK as far as the phone thinking it was a VZW S4.
Sorry if rambling, just trying to pass as many details and thoughts as possible.
Do I have any options, now?
I downloaded the stuff to do Heimdall One Click and was thinking about trying that route, with a file named "SCH-I545_MDK_562219_Stock_Restore.exe"
I have a 32GB MDK VZW SCH-i545 S4 that is running fine on ECHOE v29. Can I copy anything from that phone and flash in ODIN to recover the 16GB (was MDK) VZW SCH-i545 that is stuck on Download mode only?
Is there any way to flash a NANDROID via ODIN or some other program from a PC thru ODIN?
hmmm.. The Ktoonez kernal works on any s4. But if you flashed T mobile Files, which I don't think was the case since you flashed the Verizon stuff... I have never used Heimdall, so I can't comment on that. I don't know what to say. There might be a way to make a debrick image... Someone more experienced will have to help, sorry.
XxD34THxX said:
hmmm.. The Ktoonez kernal works on any s4. But if you flashed T mobile Files, which I don't think was the case since you flashed the Verizon stuff... I have never used Heimdall, so I can't comment on that. I don't know what to say. There might be a way to make a debrick image... Someone more experienced will have to help, sorry.
Click to expand...
Click to collapse
No need to apologize! You have helped all you can. I appreciate it greatly!
I just want to ensure that I exhaust ALL possibilities of recovering the MDK, before I throw in the Kies upgrade towel.
I wonder if I'll get in hot water for starting a new thread.....
Warning: VRUGOC1 is impervious to previous bootloader bypass methods, and cannot be downgraded. Proceed with caution.
I managed to hose my phone while rooting it somehow, so I had to track down the factory image for I545VRUGOC1 / I545VZWGOC1. To actually flash it, I had to use Odin 3.10.6 rather than 3.09 for some reason, which is available in the links below. I also replaced Odin's SS_DL.dll with the one from the zip that contains the tar file, but I'm not sure if that was necessary.
Hope this helps anyone else from who's stuck
TAR
https://mega.nz/#!T0tTDZKA!tIw4ebWEWhsTJWTbyWVx9e07aSBSc_1_Xm2mWWkdu8I
Mirror: http://upple.it/4b1331ec4f4dd04e/VZW-I545VRUGOC1-20150502144520.zip
Slower / crappier mirrors I found in case the above doesn't work:
http://rapidgator.net/file/6f4fd8106796c1bba92dd20a7b5a5c51
http://uploaded.net/file/zcbqwyz5
Odin
http://odindownload.com/download/Odin3_v3.10.6.zip
Mirror: https://mega.nz/#!qh9UTJ6Q!gLDkj2xwXRb8Wa2YTbPODpdrhqowK-s6eZjXI_bTrhQ
kd- said:
Warning: VRUGOC1 is impervious to previous bootloader bypass methods. Proceed with caution.
Click to expand...
Click to collapse
Thanks! I found the file here too:
http://d-h.st/LNQV
My question is, I have a Kitkat Verizon phone here, I assume upgrading it restricts custom ROMs that can be loaded to it?
Thanks for another mirror - the more the better
Yes, I don't think any current custom ROMs work with the VRUGOC1 bootloader, etc. FlashFire has worked for a couple experiments I've run (flashing wireless hotspot fix, for example), but I'm hesitant to flash anything more substantial. I have not tried SafeStrap but I have not seen anything about it working yet.
kd- said:
Thanks for another mirror - the more the better
Yes, I don't think any current custom ROMs work with the VRUGOC1 bootloader, etc. FlashFire has worked for a couple experiments I've run (flashing wireless hotspot fix, for example), but I'm hesitant to flash anything more substantial. I have not tried SafeStrap but I have not seen anything about it working yet.
Click to expand...
Click to collapse
muniz_ri has posted a stock, de-odexed (and odexed, too of course) that should work with OC1 bootloader (it doesn't have a bootloader in it, so the current bootloader should stay)
http://forum.xda-developers.com/gal...ment/rom-i545oc1-5-0-1-100-stock-mdk-t3097902
I haven't installed flashfire yet, but i am on OC1 and already went through the rooting process.
Does this boot if I flash it and the NK4 bootloader?
Oishikatta said:
Does this boot if I flash it and the NK4 bootloader?
Click to expand...
Click to collapse
muniz_ri has a tar with the oc1 build and the nk4 bootloader, look in either general or Android development
^^
It's in android development. Only two or three ROMs work on OC1(at most). I only know of one confirmed.
XxD34THxX said:
^^
It's in android development. Only two or three ROMs work on OC1(at most). I only know of one confirmed.
Click to expand...
Click to collapse
muniz has a stock rooted ROM for the oc1 people, which makes sense if you're going from stock. you can flash deodexed ROM and be able to use xposed framework
skepticmisfit said:
muniz has a stock rooted ROM for the oc1 people, which makes sense if you're going from stock. you can flash deodexed ROM and be able to use xposed framework
Click to expand...
Click to collapse
Yep, it works just fine, flashed with FlashFire.
https://docs.google.com/file/d/0B4RU_ZH5QUASaU9LcDJ3WWZfdXM/edit?usp=docslist_api&pli=1 I found it here two
Can somebody please help me? First, my phone is locked and I was in NK1, so I decided to flash OC1 by the flashfire method (I don't remember who's the author of the topic), everything went fine and I started to use lollipop, but then I was about to sell my phone and I went to settings, then factory reset and the phone restarted, wiped data and cache by itself and then turned on, I thought everything was ok, but then it just stayed in the samsung's wizard screen, it never passed from that screen. So, I decided to manually enter recovery and do a factory reset again, but the result was the same. In order to unbrick the phone I had to use odin and install the NC5 original firmware .
So, my question is, If I want to install lollipop and I don't care to stay with an unlockable bootloader I justt need to use this Firmware and install it through odin? Or do I need to have an specific firmware (e.g nc5, nk1) and unlocked bootloader?
bayron_olaff said:
Can somebody please help me? First, my phone is locked and I was in NK1, so I decided to flash OC1 by the flashfire method (I don't remember who's the author of the topic), everything went fine and I started to use lollipop, but then I was about to sell my phone and I went to settings, then factory reset and the phone restarted, wiped data and cache by itself and then turned on, I thought everything was ok, but then it just stayed in the samsung's wizard screen, it never passed from that screen. So, I decided to manually enter recovery and do a factory reset again, but the result was the same. In order to unbrick the phone I had to use odin and install the NC5 original firmware .
So, my question is, If I want to install lollipop and I don't care to stay with an unlockable bootloader I justt need to use this Firmware and install it through odin? Or do I need to have an specific firmware (e.g nc5, nk1) and unlocked bootloader?
Click to expand...
Click to collapse
Yes, that sounds correct. Personally, I wouldn't flash the OC1 factory image unless you have to - I'd flash the NK1 image, which should reset everything, then upgrade to Lollipop using a method that doesn't upgrade the bootloader so whoever gets the phone next can downgrade if they want to.
Can anyone confirm the mega link is a no-wipe oc1 package?
persdata.img doesnt appear in it just making sure.
Edit : been tested it appears to be a no wipe Odin package
Flashed GOF1 by mistake from sammmobile using Odin. Now can't find a root method that works. Tried to flash COF1 using Odin but get fail message. Anyone have any suggestions? I'm really just needing root to get backups restored from TiBu. Much appreciated if anyone has suggestions.
Same here. Looking for a way to root OF1. Tried to downgrade to OC1 using method here:
http://forum.xda-developers.com/gal...-to-update-to-i545of1-5-0-1-keeproot-t3182544
It starts to install, but then fails and soft-bricks the phone and I have to use Repair Assistant get reinstall OF1. Any help to root from OF1 appreciated. TIA
I was able to downgrade to oc1 baseband and build. I got the idea from how I use to jump from android to Tizen on my first generation watch. I ran the of1 md5 and intentionally pulled the cord from my phone about 3/4 of the way through the install. Rebooted and had the white monitors telling me to hook up to kies. Then I loaded the PIT file in Odin, and put I545_OC1_Bootloader.tar.md5 in pda, ticked Re-Partition, Auto Reboot, and Nand Erase All boxes in options, and flashed it. After my bootloader flashed sucessfullly, I ran a stock md5 of the OC1 rom. Once flashed I booted into recovery, wiped cache, wiped system data both two times just to be safe, rebooted and I was on stock OC1 baseband and build ready to root with kingroot.
So you tried to reflash of1 using kies? Would you posible have the files you used to go back?
Thanks, really good idea
HeeyMaan said:
I was able to downgrade to oc1 baseband and build. I got the idea from how I use to jump from android to Tizen on my first generation watch. I ran the of1 md5 and intentionally pulled the cord from my phone about 3/4 of the way through the install. Rebooted and had the white monitors telling me to hook up to kies. Then I loaded the PIT file in Odin, and put I545_OC1_Bootloader.tar.md5 in pda, ticked Re-Partition, Auto Reboot, and Nand Erase All boxes in options, and flashed it. After my bootloader flashed sucessfullly, I ran a stock md5 of the OC1 rom. Once flashed I booted into recovery, wiped cache, wiped system data both two times just to be safe, rebooted and I was on stock OC1 baseband and build ready to root with kingroot.
Click to expand...
Click to collapse
This is exactly what i need. I have just lost root by taking OTA to OF1, and i think what you mentioned might work to get me back to OC1 Rooted until someone comes up with something better. Sound feasible? Does this method only work when you pull the plug like that? still not sure what white monitors is, sorry.
I am on OF1 and was rooted, flashed the stock rooted ROM and it didn't take. I Odin flashed this - http://forum.xda-developers.com/galaxy-s4-verizon/development/odin-i545vrugof1-neutered-bl-t3203361 and it got me back to unrooted OF1. I then went and did the re-root process for OF1 and am back rooted again. I think this file is a stock OF1 image, just doesn't have the bootloader which if you're on OF1 already then you have the OF1 bootloader.
What options do we have if we have the OF1 bootloader.
Sent from my SCH-I545 using Tapatalk
shiz0id said:
What options do we have if we have the OF1 bootloader.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
As far as I know stang5litre has a OF1 compatible ROM and of course the stock deodex ROM/stock ROM. I'm not sure of any past those.