hi..is there anybody can help me...
i got phone model 'ninetology insight' i9430.
it got brick during flash because usb disconnect..it doesn't shows anything...even charging..no display anything..cant turn it on..
hope somebody can help me with this problem..
can you get into bootloader or recovery, or see it via adb?
pavlpavel said:
can you get into bootloader or recovery, or see it via adb?
Click to expand...
Click to collapse
nope..
cant connect to pc either..when i try plug in using usb, nothing happen..
can help me how to connect to pc? thank you
Tab Bricked....Help
I used Swingtel HelloTab 16GB it bricked stuck on Boot LOGO
its CHIP is E720_SIGN & Processor is Qualcomm Powered Intelligent
pleas help me to install CWM & ROM Mathod
its not going to boot recovery MODE
its only BOOT with Vol+ & Power Button in DOWNLOAD MODE and
BOOT into Vol- & power Button in Fastboot Mode
how to Boot into recovery Mode Please HELP
I hope this helps, it happends to me when the 1st-5th time i install the Img file using LiveSuite
try to install USBDeview here the link ->tomsguidedotcom/us/download/USBDeview,0313-13254dothtml
(just retype the dot = "." , can post link here coz im new.
1. open Device Manager and USBDeview
2. click on "Created Date" on upper right of the program
3. uninstall all USB driver the date after the port hud driver (VID_1f3a_PID_efe8) on USBDeview. wait for the Device manager to install the important driver u accidentally uninstall.
4. hold power botton for at least 30 sec
5. run livesuit.exe, select your img file. connect the usb to the PC or laptop
6. while hold volume up insert the usb cable in the andriod device you have.
7. while holding the volume key, press power botton at least 2 sec, 4-5 times.
8.if unknow device show just install manually the usb driver in the livesuit folder using Device Manager (Update DriverSoftware->Browse my 9. Computer for Driver Software-> Let me Pick from the list of device -> Have Disk -> Browse (Go to the LiveSuit Folder click the *.inf driver in usb driver folder) just click ok
9. w8 for the LiveSuit to react. if nothing happend, reapeat Step 4.
10 click on "Created Date" on upper right of USBdeview, check if port hud driver (VID_1f3a_PID_efe8) turn "GREEN" mean conneted . this you click "Yes" on the LiveSuit option given.
Hope This one Help. Good luk!
rkillahph said:
I hope this helps, it happends to me when the 1st-5th time i install the Img file using LiveSuite
try to install USBDeview here the link ->tomsguidedotcom/us/download/USBDeview,0313-13254dothtml
(just retype the dot = "." , can post link here coz im new.
1. open Device Manager and USBDeview
2. click on "Created Date" on upper right of the program
3. uninstall all USB driver the date after the port hud driver (VID_1f3a_PID_efe8) on USBDeview. wait for the Device manager to install the important driver u accidentally uninstall.
4. hold power botton for at least 30 sec
5. run livesuit.exe, select your img file. connect the usb to the PC or laptop
6. while hold volume up insert the usb cable in the andriod device you have.
7. while holding the volume key, press power botton at least 2 sec, 4-5 times.
8.if unknow device show just install manually the usb driver in the livesuit folder using Device Manager (Update DriverSoftware->Browse my 9. Computer for Driver Software-> Let me Pick from the list of device -> Have Disk -> Browse (Go to the LiveSuit Folder click the *.inf driver in usb driver folder) just click ok
9. w8 for the LiveSuit to react. if nothing happend, reapeat Step 4.
10 click on "Created Date" on upper right of USBdeview, check if port hud driver (VID_1f3a_PID_efe8) turn "GREEN" mean conneted . this you click "Yes" on the LiveSuit option given.
Hope This one Help. Good luk!
Click to expand...
Click to collapse
i already try your method..but seems nothing happen...still my android cant connect to pc..
i just only need to connect to pc only..only that way i can solve my problem..thanks anyway..
sigh..
i think because i flash a wrong recovery then my phone brick...
xhitgirlx said:
i think because i flash a wrong recovery then my phone brick...
Click to expand...
Click to collapse
*is there any indication in ur device manager that u are connected wen u plug in the device?
*what usb cable are u using? try using another usb cable with complete pins.
rkillahph said:
*is there any indication in ur device manager that u are connected wen u plug in the device?
*what usb cable are u using? try using another usb cable with complete pins.
Click to expand...
Click to collapse
i try already another usb cable..nothing happen also..i dont know why..
it's like when you plug in your device to the pc nothing happen...
it means no device connected at the pc.
i think no body can help me in this situation..even the developers...thank you.:good:
Related
Im trying to unlock Sony xperia sola rite now.... it wont stay on fastboot mode ( volume up + plug usb) when i press volume up, the light strip turns blue for a second or two, but then goes into charging while shutdown mode... I chek *#*#7378423#*#* -- Service info > Configuration > Rooting Status it says - YES// I try USB debugging ON and OFF... I try to stay on fastboot with my home pc windows 7 and my notebook windows vista..Battery 95-100% charged... What i do wrong?
Do you have installed drivers properly?
Try reinstall drivers and try different USB port.
xbeda said:
Do you have installed drivers properly?
Try reinstall drivers and try different USB port.
Click to expand...
Click to collapse
how can i install drivers without connecting device?
I solved the problem)
1) Open device manager in windows
2) Connect usb cable to your phone pushing vol up button
3) Device manager will show you fastboot device for 2-3 sec (before the phone go to charge mode) Right click on fastboot device and install drivers from C:\Android\sdk\extras\google\usb_driver
4) Reconnect usb cable pushing volup button
I have the same problem but I dont know if cuz my PC is way too slow. I dont even have a chance for it to show up But I know it connected cuz of the alert sound.
---------- Post added at 08:50 AM ---------- Previous post was at 08:27 AM ----------
Haha I solved my problem by installing the driver in safe mode. Things went much quicker here )
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
Do you know u are GENIUS !!!
i have been trying to get my phone in fast boot mode for the last 3 weeks then then i changed the "System Varibales" in my Windows & ( 64Bit) and then tried your above method AND ... volaaaa it works ... in a flash it works then the pone is in Fastboot mode .
( Device : Sony Xperia Sola 2012 without upgrade to .654)
Don't call me the genius, I found the solution using google
I just wrote a quick summary of it.
Nerre said:
I just wrote a quick summary of it.
Click to expand...
Click to collapse
...which was enormously helpful. Thanks!! (Can't push the thanks button as I don't have enough posts yet.
BTW, I used the method with the Xperia Go, so obviously the method is not limited to a particular model.
It works
Really helpful!
Hey
I can't even know where will the fastboot device appear to change driver. What can I do? My sola goes in charge mode very quickly I plugged my usb cable in almost 100 times and tried everything.
Okay, I'm totally lost. When I hold volume down button "s1boot download" appers in device manager, but it can't install a proper driver. I know I need s1boot fastboot and hold volume up button but it doesn't appears. Only the portable device with an H:/ partition
Make sure phone is OFF
While plugging in the USB cable, hold and keep holding the UP VOLUME key
You will hear a system sound played
Do all these while you have Device Manager on screen
Exclamation mark appears on the ADB driver icon
Chose the option to look for the driver in your hard disk - point to where the drivers are.
If using Win8 then you need to disable signing of drivers first (search on net how to)
So far you managed to do this or not?
ricstc said:
Make sure phone is OFF
While plugging in the USB cable, hold and keep holding the UP VOLUME key
You will hear a system sound played
Do all these while you have Device Manager on screen
Exclamation mark appears on the ADB driver icon
Chose the option to look for the driver in your hard disk - point to where the drivers are.
If using Win8 then you need to disable signing of drivers first (search on net how to)
So far you managed to do this or not?
Click to expand...
Click to collapse
Hey, nothing is working for me. I did the steps above, but with no chance to install any driver. At the driver manager, the s1boot fastboot-thing is showing up for some seconds and then disappear. i can't change the driver or install the new one.
Any suggestions? I want to change to cm9 so much, because the stock rom really sucks...it is slow and buggy
Edit: I found this post http://forum.xda-developers.com/showthread.php?t=1554632 and it works for me!!!
Edit 2: It seems, that you have to do this steps everytime you flash the boot.img to the phone.
I did everything. I installed the driver but when I hold volume up while plug in usb, the led does not turn to BLUE. It turns pink or purple, some kind of colour. What should I do guys? I've gone mad.
Thanks
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
Thanks a ton!!!
i wasted my whole day trying it!
just hit this thread!!
will reply if it works!
---------- Post added at 06:32 PM ---------- Previous post was at 06:10 PM ----------
srivmanu said:
Thanks a ton!!!
i wasted my whole day trying it!
just hit this thread!!
will reply if it works!
Click to expand...
Click to collapse
Does't work!!
help someone??:crying::crying:
Doesnt work for me either. I tried everything for hours, but i only see a purple LED for a few seconds and then the phone mode changes into charging.
All drivers are installed.
Flashtool doesnt recognize the Sola either.
Is there a way to flash a recovery without having the Sola bootloader unlocked?
Greetings
still no fastboot
device manager opened
phone off, holding vol. up plugging in usb
NOTHING happens on computer no sound, device manager doesn't refreshes, no purple led on the phone, just enters charging quickly
tried another usb port
tried to enter fastboot from flashtool,
tried to enter with command adb reboot bootloader / adb reboot fastboot
NOTHING happens just reboots normally
So I don't have a clue what's going on there, may the fastboot disappeard or broken?
BUT I used the fastboot for a couple weeks ago in this computer in this usb port, since that I tried some rom does it matter?
BL Locked
Win7 x64
pl explain in detail
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
pl explain in detail.im a novice and i want to update to ICS in ma Sola....but fastboot driver installtion failed in my W 7 (64 bit):crying::crying::crying:
Solution
For those who still dont get it to work by "Nerre's" method.
The procedure will be same. You have to download latest android_winusb.inf file. I couldnt get it to work bcz of this. I was using the file from sony site. It was giving me some certificate error. Then I used the lates file downloaded from sdk kit. Then this procedure worked.
Make sure to choose "Android Boot loader Interface" after you select ...winusb.inf file. Then before clicking next, reconnect your device in fastboot mode.
Hope this helps someone.
I'm trying to unlock my booloader, but every time I enter on fastboot mode, the phone restarts. What am I doing wrong ?
The drivers arnt installed? My laptop said new device detected and I had to manually pick the drivers
Sent from my LT26i using Tapatalk 2
Ben36 said:
The drivers arnt installed? My laptop said new device detected and I had to manually pick the drivers
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
I believe so. My laptop says nothing now, and the cellphone just restart
Prepare like this before connecting your phone in fastboot mode:
go into device manager and keep the window open
now put your device in fastboot mode
there will be a new unknown device showing up at the top(mostly S1 boot device or something)
right click it, and select properties, then go to update drivers and manually point to the drivers you downloaded and extracted: http://bit.ly/As9FaT
install them.
if it doesnt work don't panic, dont close the window but get back to the properties of S1 Boot device and click on update drivers and point to the directory where the .inf file is stored.
now connect your phone until the blue LED shows up again and press the button to install the drivers QUICKLY, repeat this several times until it works!
Install theses drivers : (link sent by MP because of forum restrictions ... )
Deconnect your Xperia from your pc.
Shutdown your Xperia.
Hold the "volume Up" button and connect your Xperia to your pc. The LED may become blue and stay : your Xperia is now in "fasboot mod".
realfelix said:
Prepare like this before connecting your phone in fastboot mode:
go into device manager and keep the window open
now put your device in fastboot mode
there will be a new unknown device showing up at the top(mostly S1 boot device or something)
right click it, and select properties, then go to update drivers and manually point to the drivers you downloaded and extracted: http://bit.ly/As9FaT
install them.
if it doesnt work don't panic, dont close the window but get back to the properties of S1 Boot device and click on update drivers and point to the directory where the .inf file is stored.
now connect your phone until the blue LED shows up again and press the button to install the drivers QUICKLY, repeat this several times until it works!
Click to expand...
Click to collapse
I did this, but the laptop said: Windows could not find the driver software for the device. And the phone restarts =/
That's what happens...
I really need to unlock my bootloader to install CM10 ???
I have a xperia S and I'm trying to install CM10 on it, but I just cant unlock my bootloader. Every time I enter on fastboot mode, the phone restarts, and I dont succed trying to install the usb drivers because the phone restarts and the pc says "the windows could not find the driver software for the device. I was using ICS 4.0.4 but I downgrade to GB thinking the problem is the rom. =/
please help me, I really need CM10
conanjf said:
I have a xperia S and I'm trying to install CM10 on it, but I just cant unlock my bootloader. Every time I enter on fastboot mode, the phone restarts, and I dont succed trying to install the usb drivers because the phone restarts and the pc says "the windows could not find the driver software for the device. I was using ICS 4.0.4 but I downgrade to GB thinking the problem is the rom. =/
please help me, I really need CM10
Click to expand...
Click to collapse
what you gotta do is this..
download http://www.mediafire.com/?lt8ghch95u5abgo
If you open it, there are 2 zip files.
1. open drivers.zip
2. extract it somewhere
3. open device manager (or whatever it's called in English windows)
4. connect your Xperia S in fastboot mode (volume up and plug in USB)
5. in less them 3 seconds, hit right button on S1(something device with exclamation mark)
6. select "update drivers"
7. select somewhere\x64\usbwin folder
8. hit ok.
at this time your Xperia S will be allready out of fastboot mode.
9. wait for windows to install drivers
10. wait another couple of seconds, and plug Xperia S in fastboot mode again
If I've helped you, hit the thanks button
Harsh7689 said:
what you gotta do is this..
download http://www.mediafire.com/?lt8ghch95u5abgo
If you open it, there are 2 zip files.
1. open drivers.zip
2. extract it somewhere
3. open device manager (or whatever it's called in English windows)
4. connect your Xperia S in fastboot mode (volume up and plug in USB)
5. in less them 3 seconds, hit right button on S1(something device with exclamation mark)
6. select "update drivers"
7. select somewhere\x64\usbwin folder
8. hit ok.
at this time your Xperia S will be allready out of fastboot mode.
9. wait for windows to install drivers
10. wait another couple of seconds, and plug Xperia S in fastboot mode again
If I've helped you, hit the thanks button
Click to expand...
Click to collapse
I did this a lot of times, but the pc says, windows could not find the drivers and immediately the phone restarts to charging mode =/
How can it be ??
Do 1 thing, keep your device manager opened, connect the phone in FASTBOOT mode and as soon as the Driver icon appears, update driver manually !! It's okay if the phones disconnects.. Once the drivers are installed, connect the phone again..
Harsh7689 said:
How can it be ??
Do 1 thing, keep your device manager opened, connect the phone in FASTBOOT mode and as soon as the Driver icon appears, update driver manually !! It's okay if the phones disconnects.. Once the drivers are installed, connect the phone again..
Click to expand...
Click to collapse
PC says: Windows could not find the driver software. And nothing happens =/ See the print
READ what i have written properly..!!
Harsh7689 said:
READ what i have written properly..!!
Click to expand...
Click to collapse
I did man! But the driver doesnt install, that's the problem =/
I downgrade mt firmware to GB and tried to flashboot in another pc and it works.
conanjf said:
I downgrade mt firmware to GB and tried to flashboot in another pc and it works.
Click to expand...
Click to collapse
Okay!!
Congrats
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
hey guys this is the new thread as the previous thread can not be monitored now as the owner of that thread @Ivan93tm don't have xperia go anymore
so here i start
requirements
Download and install JDK tools form Java here.
Download SDK android from this site.
usb_driver.zip - 8.68 MB
for installing the new sdk in windows 8
extract the sdk to a convenient place
run sdk manager and download Extras file "google usb drivers".
if sdk manager don't run then follow these steps
open sdk/tools/android.bat with your favorite editor.
find this code
set java_exe=
call lib\find_java.bat
if not defined java_exe goto :EOF
then replace this with
set java_exe="D:\Program Files\Java\jdk1.7.0_07\bin\java.exe" (make sure you give your java.exe file path)
save android.bat then run android.bat as administrator and you are done your sdk will run.
now follow the steps
go to settings in windows 8 then go to general then in advanced setup click restart now.
then go to troubleshoot --> Advanced option --> Startup settings --> Restart.
then you will get a window with some options choose number 7. Disable Driver Signature Enforcement.
or you can do it through cmd lines.
open cmd as administrative.
type "bcdedit /set testsigning on" and restart PC
and when bellow steps are done then at the end type this type "bcdedit /set testsigning off" in cmd and restart PC
power off you phone.
go to control panel --> system and Security --> System --> Device manager.
now connect your phone in fastboot mode i.e connecting to usb while holding the volume + button
USE USB 2.0 ONLY.
now S1 fast boot device is appear click fastly on it and update driver.
now when phone turn in normal mode unplag phone (keep open update driver windows).
select driver from folder
then select "chose manualy from a list of driver in computer".
browse from disk and select "android_winusb.inf" from "...\android-sdk\extras\google\usb_driver" and select "android bootloader interface.
before click next plug again the phone in fastboot mode.
click next and your done.
EDIT :
For WINDOWS 8.1
just update your windows from store
or download from here
credits to @Ivan93tm
One had success with different method:
http://forum.xda-developers.com/showthread.php?p=45550695#post45550695
ChikeD said:
One had success with different method:
http://forum.xda-developers.com/showthread.php?p=45550695#post45550695
Click to expand...
Click to collapse
he used flashtool but flashtool doesn't work for all including me i tried installing driver using flashtool in bot win7 and win8 but failed and finally i choose this method
garvitdelhi said:
he used flashtool but flashtool doesn't work for all including me i tried installing driver using flashtool in bot win7 and win8 but failed and finally i choose this method
Click to expand...
Click to collapse
Didn't work for him either before he followed the procedure.
ChikeD said:
Didn't work for him either before he followed the procedure.
Click to expand...
Click to collapse
ok cool but i have the driver right now i am going to try that method on another pc if it gives success then i am going to add that method also using his permission
garvitdelhi said:
ok cool but i have the driver right now i am going to try that method on another pc if it gives success then i am going to add that method also using his permission
Click to expand...
Click to collapse
I don't think he is the one posted if first, ask him where he found it.
I can't install because "S1 fast boot device" doesn't show up. The only thing that show up in Device Manager for me is "Unknown USB Device (Device Failed Enumeration). Does anyone know what this means?
registradus said:
I can't install because "S1 fast boot device" doesn't show up. The only thing that show up in Device Manager for me is "Unknown USB Device (Device Failed Enumeration). Does anyone know what this means?
Click to expand...
Click to collapse
Are you connecting your phone in fastboot mode .. ? and are you using usb 2.0 port
garvitdelhi said:
Are you connecting your phone in fastboot mode .. ? and are you using usb 2.0 port
Click to expand...
Click to collapse
Yeah I've tried everything. Connects fine normally.
tried
different USB ports, 2.0 and 3.0
enabling USB debugging mode
uninstalling drivers
Light on phone turns green, but then just goes into charging mode.
I'm on Windows 8 64
registradus said:
Yeah I've tried everything. Connects fine normally.
tried
different USB ports, 2.0 and 3.0
enabling USB debugging mode
uninstalling drivers
Light on phone turns green, but then just goes into charging mode.
I'm on Windows 8 64
Click to expand...
Click to collapse
green...??? it must be voilet or blue while pluging in your phone your phone must be switched off and then connect to usb whole pressing the volume up key not down
garvitdelhi said:
green...??? it must be voilet or blue while pluging in your phone your phone must be switched off and then connect to usb whole pressing the volume up key not down
Click to expand...
Click to collapse
Really? I've got Xperia U, PC Companion tells me to press volume down...
---------- Post added at 05:45 AM ---------- Previous post was at 05:35 AM ----------
garvitdelhi said:
green...??? it must be voilet or blue while pluging in your phone your phone must be switched off and then connect to usb whole pressing the volume up key not down
Click to expand...
Click to collapse
Tried holdin volume up instead, light goes blue, but still get "USB device not recognised"
green is for flashmode and voilet is for fastboot mode and try with volume up button pcc uses flashmode so it tells you to put with volume down and did your phone is detected by pcc if not try installing pcc again and then disable windows verification and then try again
Tried holdin volume up instead said:
Expriece the same bug (
anyone can help me, Everything is installed. PC Companion, Drivers, Flashtool
Click to expand...
Click to collapse
wellwits said:
Expriece the same bug (
anyone can help me, Everything is installed. PC Companion, Drivers, Flashtool
Click to expand...
Click to collapse
Have you tried what the OP says?
Try installing the drivers from flashtool with the steps in this post?
Good day is this woking on wndows 8.1 too ??
On my Windows 8.1 64-bit at step 8 it doesn't recognize it as S1 fastboot device.
When I select android_winusb.inf and click OK, it says the folder specified doesn't contain a compatible driver for my device, make sure it is designed to work with Windows x64-based systems.
So I can't. ;(
2Radon said:
On my Windows 8.1 64-bit at step 8 it doesn't recognize it as S1 fastboot device.
When I select android_winusb.inf and click OK, it says the folder specified doesn't contain a compatible driver for my device, make sure it is designed to work with Windows x64-based systems.
So I can't. ;(
Click to expand...
Click to collapse
same problem with my windows 8.1 64bit
Ok So i must sty on win 8
not working
im on win 8.1 & not worked for me
now in win Xp not working too
i think flash ic is damaged
usb not recognized in win xp in flash & fastboot mod :crying: :crying:
same problem here. device manager displays unknwon device and wont accept the .inf - file...
hi,
As is thred name - can't go to download mode - after connecting to PC phone is bootlooping into system
Help
borda01 said:
hi,
As is thred name - can't go to download mode - after connecting to PC phone is bootlooping into system
Help
Click to expand...
Click to collapse
What do you want to do?
Flash rom inne flash tool
borda01 said:
Flash rom inne flash tool
Click to expand...
Click to collapse
Your phone is not powering down ?
Lenovo P780 is flashed by powering down.
You power down the phone, prepare to flash and when you are ready just plug the USB cable with the phone powered down.
That is it.
That not works, phone is powered down, but after connecting cable is powering on into system...
borda01 said:
That not works, phone is powered down, but after connecting cable is powering on into system...
Click to expand...
Click to collapse
Try this:
When the procedure to flash is ready, with the USB cable connected press the red button and keep the button pressed, then press download in SP Flash Tool and release the button. Do all this in this order. Tell me what is going on?
The flash should start.
stympy said:
Try this:
When the procedure to flash is ready, with the USB cable connected press the red button and keep the button pressed, then press download in SP Flash Tool and release the button. Do all this in this order. Tell me what is going on?
The flash should start.
Click to expand...
Click to collapse
Phone is booting, sp flash tool "searching"
Phone has TWRP installed, but I can't install any ROM - error appears
borda01 said:
Phone is booting, sp flash tool "searching"
Phone has TWRP installed, but I can't install any ROM - error appears
Click to expand...
Click to collapse
What firmware do you have installed now?
stympy said:
what firmware do you have installed now?
Click to expand...
Click to collapse
(vibeui_v2.0_1443_7.25.1_st)
In device manager phone is detected as MT65XX preloader in about 5 seconds - after that it bootloops.
EDIT:
solution:
Open "Device Manager" on your Windows PC.
Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
Click to expand...
Click to collapse
borda01 said:
In device manager phone is detected as MT65XX preloader in about 5 seconds - after that it bootloops.
Click to expand...
Click to collapse
I understand now. Your computer does not recognize your phone. The drivers are not installed at all or correctly.
Download the drivers from here and install them. The drivers are at the bottom of the page.
To flash use only the sp flash tools from here.
Small tutorial to install the drivers:
I think was someting like this:
1. First install the .exe file. Reboot PC.
2. Now plug the phone to the PC and new hardware wizard will appear. Unplug the USB cable.
3. Now power off the phone.
4. Again plug the phone this time powered off.
5. At this time in Device Manager appears for a second or two not in USB area, in ports area something with.. MTK65xx...
6. Click very fast on it because that will dessapear fast.
7. After you clicked on it all you have to do is update driver, and voila you have drivers installed and now all you have to do is to flash you ROM.
Hope this will help you.
Good luck.
What is a newest version of TWRP for P780?
borda01 said:
What is a newest version of TWRP for P780?
Click to expand...
Click to collapse
For normal layout is TWRP 2.8.4.0 rev.2 and for + layout is 3.0.2-7.