[Q] Please Help! i need TS for Allwinn A13 KB901 - Android Q&A, Help & Troubleshooting

which TS I have to take? Touch does not work anymore. Please Help.
[email protected]:/ # "lsmod"
"lsmod"
device 26862 0 - Live 0x00000000
rtl8150 10305 0 - Live 0x00000000
mcs7830 7581 0 - Live 0x00000000
qf9700 9152 0 - Live 0x00000000
asix 24601 0 - Live 0x00000000
sun5i_csi0 34042 0 - Live 0x00000000
gc0308 16888 1 - Live 0x00000000
camera 53105 1 sun5i_csi0, Live 0x00000000
videobuf_dma_contig 6243 1 sun5i_csi0, Live 0x00000000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0x00000000
cedarx 11869 0 - Live 0x00000000
mali 200007 29 - Live 0x00000000
ump 34213 11 mali, Live 0x00000000
nand 225000 8 - Live 0x00000000
[email protected]:/ #
---------------------------------
CPU Info:
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun5i
Revision : a13b
Serial : 04417dac31303030504d583616254209

Related

CyanogenMod 10 for Allwinner a13 [08/28/13] touchscreen is not working

i have installed [ROM] CyanogenMod 10 for Allwinner a13 [08/28/13] by AnonFBI in my a13 tab, but my touchscreen is not working, i dont have the original ROM pleas help me ... these are the details
[email protected]:/ $ su
[email protected]:/ # lsmod
8188eu 581006 0 - Live 0x00000000
rtl8150 10305 0 - Live 0x00000000
mcs7830 7581 0 - Live 0x00000000
qf9700 9152 0 - Live 0x00000000
asix 24601 0 - Live 0x00000000
sun5i_csi0 33255 0 - Live 0x00000000
cedarx 11869 0 - Live 0x00000000
ov5640 31583 0 - Live 0x00000000
mt9m112 15359 0 - Live 0x00000000
gt2005 19412 0 - Live 0x00000000
gc0308 18408 1 - Live 0x00000000
videobuf_dma_contig 6251 1 sun5i_csi0, Live 0x00000000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0x00000000
mma7660 6857 0 - Live 0x00000000
mxc622x 6088 0 - Live 0x00000000
mecs 4078 0 - Live 0x00000000
bma250 7545 0 - Live 0x00000000
dmard06 11119 0 - Live 0x00000000
ft5x_ts 44577 0 - Live 0x00000000
mali 150572 8 - Live 0x00000000
ump 48978 27 mali, Live 0x00000000
hid_sony 2377 0 - Live 0x00000000
hid_gaff 2817 0 - Live 0x00000000
[email protected]:/ # getevent
add device 1: /dev/input/event4
name: "Logitech Logitech USB Optical Mouse"
could not get driver version for /dev/input/mouse0, Not a typewriter
add device 2: /dev/input/event3
name: "ecompass_data"
add device 3: /dev/input/event2
name: "ft5x_ts"
add device 4: /dev/input/event0
name: "sun4i-keyboard"
could not get driver version for /dev/input/mice, Not a typewriter
add device 5: /dev/input/event1
name: "axp20-supplyer"
someone Please help me...

[Q] Please Help. Allwinner A13 Touchscreen TS?

which TS I have to take? Touch does not work anymore. Please Help.
[email protected]:/ # "lsmod"
"lsmod"
device 26862 0 - Live 0x00000000
rtl8150 10305 0 - Live 0x00000000
mcs7830 7581 0 - Live 0x00000000
qf9700 9152 0 - Live 0x00000000
asix 24601 0 - Live 0x00000000
sun5i_csi0 34042 0 - Live 0x00000000
gc0308 16888 1 - Live 0x00000000
camera 53105 1 sun5i_csi0, Live 0x00000000
videobuf_dma_contig 6243 1 sun5i_csi0, Live 0x00000000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0x00000000
cedarx 11869 0 - Live 0x00000000
mali 200007 29 - Live 0x00000000
ump 34213 11 mali, Live 0x00000000
nand 225000 8 - Live 0x00000000
[email protected]:/ #
---------------------------------
CPU Info:
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun5i
Revision : a13b
Serial : 04417dac31303030504d583616254209

[L5 II-e455f]Two modules enable on same time

Can it be this issue fixing wifi on L5 II??!
Code:
wlan_mt6620 301840 0 - Live 0x00000000
mtk_wmt_wifi 2036 0 - Live 0x00000000
mtk_fm_priv 8088 0 - Live 0x00000000 (P)
mtk_fm_drv 105996 1 mtk_fm_priv, Live 0x00000000
mtk_stp_bt 39192 0 - Live 0x00000000
mtk_stp_gps 36560 0 - Live 0x00000000
mtk_stp_uart 21096 0 - Live 0x00000000 (P)
mtk_stp_wmt 338104 9 wlan_mt6620,mtk_wmt_wifi,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0x00000000
mtk_hif_sdio 16536 2 wlan_mt6620,mtk_stp_wmt, Live 0x00000000
devinfo 832 0 - Live 0x00000000 (P)
sec 94904 0 - Live 0x00000000 (P)
vcodec_kernel_driver 25452 0 - Live 0x00000000
m4u 103644 14 - Live 0x00000000
ccmni 16112 0 - Live 0x00000000
ccci 112832 17 ccmni, Live 0x00000000
ccci_plat 113932 2 ccmni,ccci, Live 0x00000000
mtk_drvb 1216 0 - Live 0x00000000
mtklfb 20160 0 - Live 0x00000000
pvrsrvkm 191456 51 mtklfb, Live 0x00000000
Can it be this issue fixing wifi on L5 II
reiseb said:
Can it be this issue fixing wifi on L5 II??!
Code:
wlan_mt6620 301840 0 - Live 0x00000000
mtk_wmt_wifi 2036 0 - Live 0x00000000
mtk_fm_priv 8088 0 - Live 0x00000000 (P)
mtk_fm_drv 105996 1 mtk_fm_priv, Live 0x00000000
mtk_stp_bt 39192 0 - Live 0x00000000
mtk_stp_gps 36560 0 - Live 0x00000000
mtk_stp_uart 21096 0 - Live 0x00000000 (P)
mtk_stp_wmt 338104 9 wlan_mt6620,mtk_wmt_wifi,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0x00000000
mtk_hif_sdio 16536 2 wlan_mt6620,mtk_stp_wmt, Live 0x00000000
devinfo 832 0 - Live 0x00000000 (P)
sec 94904 0 - Live 0x00000000 (P)
vcodec_kernel_driver 25452 0 - Live 0x00000000
m4u 103644 14 - Live 0x00000000
ccmni 16112 0 - Live 0x00000000
ccci 112832 17 ccmni, Live 0x00000000
ccci_plat 113932 2 ccmni,ccci, Live 0x00000000
mtk_drvb 1216 0 - Live 0x00000000
mtklfb 20160 0 - Live 0x00000000
pvrsrvkm 191456 51 mtklfb, Live 0x00000000
Click to expand...
Click to collapse
as to be use this code?

[Q] Help Can you help compile the kernel and make manifest to CM11?

hi,Can you help me make the device tree (manifest) ?, for my device to compile CM 11
i downloaded CM11 repo and Kernel repo, so far
question, first compile the kernel? or CM11?
I got this info from the kernel / proc / cpuinfo
Code:
Processor : ARMv7 Processor rev 4 (v7l)
processor : 0
BogoMIPS : 1810.42
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 4
Hardware : sun7i
Revision : 0000
Serial : 08030600555648488086805116516601
github.com/amery/linux-sunxi/tree/import/lichee-3.3/a20-dev
linux-sunxi.org/A20
add lsmod info
Code:
[email protected]:/ # lsmod
8188eu 694234 0 - Live 0x00000000
zet6221 8962 0 - Live 0x00000000
stk8312 22576 0 - Live 0x00000000
switch_gpio 5852 0 - Live 0x00000000 (C)
cdc_ether 2906 0 - Live 0x00000000
rtl8150 8154 0 - Live 0x00000000
mcs7830 4947 0 - Live 0x00000000
qf9700 5167 0 - Live 0x00000000
usbnet 12504 3 cdc_ether,mcs7830,qf9700, Live 0x00000000
sunxi_csi0 28833 0 - Live 0x00000000
sp0838 14513 1 - Live 0x00000000
sp0718 13308 0 - Live 0x00000000
sp2518 14698 1 - Live 0x00000000
camera 42860 1 sunxi_csi0, Live 0x00000000
videobuf_dma_contig 3816 1 sunxi_csi0, Live 0x00000000
videobuf_core 15283 2 sunxi_csi0,videobuf_dma_contig, Live 0x00000000
device 26405 0 - Live 0x00000000
mali 184186 49 - Live 0x00000000 (O)
ump 29980 11 mali, Live 0x00000000 (O)
hdmi 22078 0 - Live 0x00000000
lcd 5314 0 - Live 0x00000000
disp 258528 14 mali,hdmi,lcd, Live 0x00000000
nand 132508 8 - Live 0x00000000 (O)
so i investigate
A20 max fre 800Mhz to 912Mhz
and
cpu Via WM8650 800MHZ +300MHZ
Tablet TechPad c981

[Q] Help FaastJB v2. gsensor not working

Here is my lsmod
8188eu 767523 0 - Live 0x00000000
8192cu 666125 0 - Live 0x00000000
mxc622x 6310 0 - Live 0x00000000
mecs 4078 0 - Live 0x00000000
mma7660 7248 0 - Live 0x00000000
gslx680 309072 0 - Live 0x0000000
device 26862 0 - Live 0x00000000
rtl8150 10305 0 - Live 0x00000000
mcs7830 7581 0 - Live 0x00000000
qf9700 9152 0 - Live 0x00000000
asix 24601 0 - Live 0x00000000
sun5i_csi0 34042 0 - Live 0x00000
gc0308 16888 1 - Live 0x00000000
camera 53105 1 sun5i_csi0, Live 0
videobuf_dma_contig 6243 1 sun5i_
videobuf_core 20242 2 sun5i_csi0,
cedarx 11869 0 - Live 0x00000000
mali 200007 62 - Live 0x00000000
ump 34213 19 mali, Live 0x0000000
nand 225000 10 - Live 0x00000000
Click to expand...
Click to collapse
and here is my getevent
[email protected]:/ # getevent
getevent
add device 1: /dev/input/event3
name: "ecompass_data"
add device 2: /dev/input/event2
name: "gslx680"
add device 3: /dev/input/event0
name: "sun4i-keyboard"
could not get driver version for /dev/input/mice, Not a typewriter
add device 4: /dev/input/event1
name: "axp20-supplyer"
Click to expand...
Click to collapse
my gsensor is mxc622x.ko please help
i backup my original msx622x.ko

Categories

Resources