[Q] ODIN Fails to update GS3 with 4.3 XXUGMK6 - Galaxy S III Q&A, Help & Troubleshooting

I did check everything from the beginning and did all the necessary steps. I tried out like three times but this is all I get.(Phone works fine though)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:0/025> File analysis..
<ID:0/025> SetupConnection..
<ID:0/025> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

anyone???

Just on the developing mode and then flash..i have that problem.my phone got brick or apply 3 to 4 times again..i hope it will work..I will suggest not to apply 4.3 it is buggy, lockscrren delay and gallery problem..
Sent from my GT-I9300 using xda app-developers app

Related

[Q] How do I downgrade custom ICS to official ICS?

Hi!
I;m on wanamlite 4.0.4 and siyah kernel wanting to have it back on official Philippines ICS 4.0.3
what i had done:
1. wipe/factory reset thru cwm
2. download in sam : I9100DXLPF
3. odin 1.85 & 3.04
and then this appears:
<ID:0/018> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100DXLPF_I9100OLBLPF_I9100DXLPB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Complete(Write) operation failed.
<ID:0/018> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
now i can't open the phone for other details of the phone like kernels etc.
what had probably happened? or do i miss something?
please help. Thanks in advance!!
which odin did you use.
try the other one to see if it works.
Cosmic Blue said:
which odin did you use.
try the other one to see if it works.
Click to expand...
Click to collapse
tried on 1.85, 1.87, 3.04
i downloaded a different country from thailand, still the same having this codes:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100DXLPF_I9100OLBLPF_I9100DXLPB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Complete(Write) operation failed.
<ID:0/018> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
i should only tick the "pda" then select the .md5 file right?
yes. that is correct.
try redownloding the rom, you may have a corrupt file.
Cosmic Blue said:
yes. that is correct.
try redownloding the rom, you may have a corrupt file.
Click to expand...
Click to collapse
ok i have it working, but i had a problem, the camera, it only has a black screen when taking pictures and videos, but when viewing them they are captured and video playback doesn't work.
what would be the problem?
^
...known bug for official ICS 4.0.4
...flashed siyah,dorimanx,speedmod that has fixed for camera bug. you can check their changelogs for the correct version.

samsung gt-b5512 stuck at white screen after inserting wrong firmware

heloo sir i am new to this forum and my problem is that my samsung gt-b5512 stucks at white screen during booting when i press the power button
this happens due to wrong firmware flashing of another galaxy y model and after then when i flashed it with the right firmware files of b5512 this below message occurs .so sir please help me because i know you can
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_B5512JXLA1_REV00.tar.md5 is valid.
<OSM> PDA_B5512JPLA3_REV00.tar.md5 is valid.
<OSM> MODEM_B5512JXLA1_REV00.tar.md5 is valid.
<OSM> GT-B5512-MULTI-CSC-OJPLA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
viouseds was
please anybody help me

samsung gt-b5512 stuck at white screen after inserting wrong firmware

heloo sir i am new to this forum and my problem is that my samsung gt-b5512 stucks at white screen during booting when i press the power button
this happens due to wrong firmware flashing of another galaxy y model and after then when i flashed it with the right firmware files of b5512 this below message occurs .so sir please help me because i know you can
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_B5512JXLA1_REV00.tar.md5 is valid.
<OSM> PDA_B5512JPLA3_REV00.tar.md5 is valid.
<OSM> MODEM_B5512JXLA1_REV00.tar.md5 is valid.
<OSM> GT-B5512-MULTI-CSC-OJPLA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)

[Q] S3 rooting + flashing, not working in Odin (PIT error)

Hi,
I've got a question about the Samsung Galaxy S3 (i9300). Before this issue it was completely original (not rooted or anything like that).
A few dags ago the phone didn't start. The battery was full (of course), the Samsung logo (with the device type etc, not the animated logo) appeared but it did nothing else. I've waited a long time, and still nothing has happened. So I Googled a lot on many sites on how to fix this problem.
I ended up with the solution 'Flash the stock ROM', so I went to sammobile (and later to samsung-updates.com) to find the original stock ROM, created by Samsung.
I found it, and tried to flash it (I put the phone in download mode (device info in the left upper corner), and the downloadmode is enabled, and I received a notification in Odin (I tried v1.85 and I'm using v3.09 right now) that says 'Added'.
This stock ROM (flashing-process) didn't work so I kept on Googling and found some solutions. I've downloaded custom ROM's and tried to download ClockworkMod recovery (I wanted to install this so I could wipe the phone and reinstall the stock ROM). Unfortunatly it didn't work.
This is the error that I get from Odin (when trying to flash the Stock ROM):
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBUGNL1_I9300ZTOUGNK2_I9300UBUGNK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Erase...
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried to install CWM Recovery with Odin, but I ended up with another error (as you can see in the PNG file that I uploaded with this thread).
Can anyone help me with restoring this phone to factory settings (and stock ROM)?
Thanks in advance!
Explanation for the screenshots (uploaded to this thread):
screen1.png: different files that I tried since the first ones didn't work (PIT files, ROM'S and CWM Recovery).
screen2.png: attempt to flash Stock ROM.
screen3.png: error after flashing Stock ROM.
screen4.png attempt to install CWM Recovery.
Seems, that you must rebuild your partitions. Look here.
rp158 said:
Seems, that you must rebuild your partitions. Look here.
Click to expand...
Click to collapse
Hi,
Thanks for your reply.
I downloaded the ZIP file from Mega, and unpacked in (and configurated it exactly like in his screenshot), but I can't find the PIT file.
Any idea where I can find that?
Without the PIT file I'm getting an error.
When I download another PIT file from the internet for this device, I get this error: (FYI: I tried 3 different PIT files):
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 1992)
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks in advance!
CB95 said:
Hi,
Thanks for your reply.
I downloaded the ZIP file from Mega, and unpacked in (and configurated it exactly like in his screenshot), but I can't find the PIT file.
Any idea where I can find that?
Without the PIT file I'm getting an error.
When I download another PIT file from the internet for this device, I get this error: (FYI: I tried 3 different PIT files):
Thanks in advance!
Click to expand...
Click to collapse
There are two versions 4.1.2 and 4.3 the pit file is in the 4.1.2 download but can be used on both roms
tallman43 said:
There are two versions 4.1.2 and 4.3 the pit file is in the 4.1.2 download but can be used on both roms
Click to expand...
Click to collapse
Hi,
Thanks for your quick reply. I really appreciate it.
I downloaded the 4.1 version en copied the mx.pit file to the 4.3 directory.
When I configure everything exactly like the screenshot (in the other thread, link is in first post in this thread), I still get an error:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I attached an screenshot of my Odin configuration, could you please take a look at that?
Thanks in advance!
CB95 said:
Hi,
Thanks for your quick reply. I really appreciate it.
I downloaded the 4.1 version en copied the mx.pit file to the 4.3 directory.
When I configure everything exactly like the screenshot (in the other thread, link is in first post in this thread), I still get an error:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I attached an screenshot of my Odin configuration, could you please take a look at that?
Thanks in advance!
Click to expand...
Click to collapse
Yep it failed on Re-Partition (pit file) looks like you may need service repair. Try using Odin 1.85 from here >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 << If fails service repair recommended.
tallman43 said:
Yep it failed on Re-Partition (pit file) looks like you may need service repair. Try using Odin 1.85 from here >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 << If fails service repair recommended.
Click to expand...
Click to collapse
Thanks for your reply.
What do you mean by that (service repair)?
Should I use Odin 1.85 to flash it, or do you mean that the phone is broken and need to be repaired by Samsung?
Another question: in Odin 3.09 there is an option (checkbox) that says 'NAND Erase', should I check this while following the tutorial (first reply on this thread)?
Thanks!
CB95 said:
Thanks for your reply.
What do you mean by that (service repair)?
Should I use Odin 1.85 to flash it, or do you mean that the phone is broken and need to be repaired by Samsung?
Another question: in Odin 3.09 there is an option (checkbox) that says 'NAND Erase', should I check this while following the tutorial (first reply on this thread)?
Thanks!
Click to expand...
Click to collapse
DO NOT CHECK NAND ERASE!!
Service repair ie get Samsung or a service repair shop to fix it.
tallman43 said:
DO NOT CHECK NAND ERASE!!
Service repair ie get Samsung or a service repair shop to fix it.
Click to expand...
Click to collapse
Thanks for your reply.
I tried to flash it with Odin 1.85, and I got the following error:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I tried to flash the firmware version 4.1.3, I got this error (Odin 1.85):
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So it looks like I should contact a repair center.
Anyway, thank you all for your replies and help, I appreciate it!

stuck in bootloop 10.1v

I have an 10.1v, which is unlocked and rooted and has been running on isis rom. I haven´t used it for about one year and now wanted to flash the cyanogenmod. Because I haven´t used it for so long, I started with a factory whipe.
But since then my 10.1v is stuck in a bootloop. I still can get into download mode so I tried to flash the stockrom via odin... Odin is checking the files and this is what happens:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_P7100BUKC8.tar.md5 is valid.
<OSM> PDA_SIGNED_HRI83_BUKDF.tar.md5 is valid.
<OSM> MODEM_HRI83_BUKDF_REV_03.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
so nothing acutally is flashed and I don´t know why... anybody who can help me? Thank you!

Categories

Resources