Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
thesm said:
Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
Click to expand...
Click to collapse
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
PureMind0 said:
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
Click to expand...
Click to collapse
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
thesm said:
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
Click to expand...
Click to collapse
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
PureMind0 said:
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
Click to expand...
Click to collapse
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
thesm said:
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
Click to expand...
Click to collapse
Ask here
http://forum.xda-developers.com/showthread.php?t=1846277
Sent from my GT-I9100 using Tapatalk 2
Related
I have a Samsung Galaxy Ace S5830i. I had no problem with rooting it, and am able to use Superuser and other root apps perfectly, but when i try to flash CWM on it, either from the ROMManager app, or from a zip file, it only displays CWM immediately after i flash it, but then the moment i press Reboot Now,and go back to the Recovery, i notice that it has reverted to the stock recovery. I have tried many different CWM recovery files, but it always works only for that one time, and then reverts to stock after reboot. I am using a stock ROM since i cannot flash Cyanogenmod until i get CWM to 'stick'. What do i do?
danny2104 said:
I have a Samsung Galaxy Ace S5830i. I had no problem with rooting it, and am able to use Superuser and other root apps perfectly, but when i try to flash CWM on it, either from the ROMManager app, or from a zip file, it only displays CWM immediately after i flash it, but then the moment i press Reboot Now,and go back to the Recovery, i notice that it has reverted to the stock recovery. I have tried many different CWM recovery files, but it always works only for that one time, and then reverts to stock after reboot. I am using a stock ROM since i cannot flash Cyanogenmod until i get CWM to 'stick'. What do i do?
Click to expand...
Click to collapse
its normal .......
we also use this cwm recovery [ it is known as temporary recovery ]
use it for flashing roms......no problem......
or
u can flash hell fusions kernel which include cwm as default recovery..........
also u can install rafeal's kernel which ve 3 variants [ cwm , rz , stock recovery] , choose acc. to ur need.....
abhi922 said:
also u can install rafeal's kernel which ve 3 variants [ cwm , rz , stock recovery] , choose acc. to ur need.....
Click to expand...
Click to collapse
NOOB. CWM and RZR need partitions in EXT4.
daxanh said:
NOOB. CWM and RZR need partitions in EXT4.
Click to expand...
Click to collapse
u should need to know how to respect others...........so ultimately u r a noob here who even dont know how to talk.......
Flashed Successfully
abhi922 said:
u should need to know how to respect others...........so ultimately u r a noob here who even dont know how to talk.......
Click to expand...
Click to collapse
I ended up using Simplicity v5 with Hell Fusion's Kernel. Thanks for the ROM Abhi922!
This basically solved my issue. Thanks for all your help guys!
We know who's noob
U daxanh
Starts a rom and discontinues it just after an update within two or three days
Sorry guys I killed my ace I think he would have committed a suicide cos ur a bad developer
Ohh I got a new one
Then starts a rom I think miui and discontinues it also after a update
Sorry guys I can't continue it
don't know why
Spamming the development section
Sorry for the flaming but he started not on me but on a great developer who's rom is the best here (sorry for claiming that too)
Sent from my GT-S5830i using xda premium
daxanh said:
NOOB. CWM and RZR need partitions in EXT4.
Click to expand...
Click to collapse
There is a better word. Newbie......try using that from now on please. And its a valid question asked at the wrong place...thats about it.
sent from GT S5830i. Running on Fraudcom Chipset.
Hi guys.
First sorry for my english.
I need your help solving the problem.
I must say that my knowledge is very basic.
Yesterday I downloaded the latest nightly build from cm site (cm-10.2-20130827-nightly-i9100)
After the download complete i tried to boot into recovery to wipe data/factory reset and cache and start flashing the rom But with no Success.
The device won't boot into recovery.
I read somewhere a post saying you should choose app and adb option under developer options\root access but still no success after changing this option.
One more question please
I downloaded the supersu app from the play store and each time it remind me the need to update the su binary each time i choose continue it faild to update.
find the kernel fixed by codeworkx in the cm thread or flash dorimanx kernel with odin ( there is one in .tar in the download list).
k2vmars said:
find the kernel fid by codeworkx in the cm thread or flash dorimanx kernel with odin ( there is one in .tar in the download list).
Click to expand...
Click to collapse
Can you post please a direct link and a guide ?
I forgot to mention that now I'm running cm-10.2-20130824 after flashing previous cm 10.2 builds with no problem.
Can u explain me what can go wrong ?
Link;OTA Problems
Rasra said:
Can you post please a direct link and a guide ?
I forgot to mention that now I'm running cm-10.2-20130824 after flashing previous cm 10.2 builds with no problem.
Can u explain me what can go wrong ?
Click to expand...
Click to collapse
Had the same problem yesterday: Auto-Update seems to be broken, if you apply an update downloaded OTA (even when coming from an older 10.2 Nightly), you can't get into recovery anymore:
Download the newest .tar (9.34) here:
http://dorimanx.shine.sk/
and flash it using ODIN
(insert .tar at PDA)
H3llwar said:
Had the same problem yesterday: Auto-Update seems to be broken, if you apply an update downloaded OTA (even when coming from an older 10.2 Nightly), you can't get into recovery anymore:
Download the newest .tar (9.34) here:
and flash it using ODIN
(insert .tar at PDA)
Click to expand...
Click to collapse
hi H3llwar.
1. Which update are you talking about? I did not do any update.
2. Is required to perform additional actions before flashing the kernel?
3. which odin ver should i use? 3.XX ? 1.85 ?
4. after flashing the kernel should i flash a custom rom again ?
thanks
Rasra said:
hi H3llwar.
1. Which update are you talking about? I did not do any update.
2. Is required to perform additional actions before flashing the kernel?
3. which odin ver should i use? 3.XX ? 1.85 ?
4. after flashing the kernel should i flash a custom rom again ?
thanks
Click to expand...
Click to collapse
1. There's an OTA update function which I used. Obviously, you didn't, it seems to be the nightly thats broken.
2. No, just flash it via ODIN
3. 3.XX worked just fine for me (changed to SlimBean yesterday as CM 10.2 seems too buggy for the moment)
4. You can flash just Dorimanx 9.34.tar, CM 10.2 & recovery should be acessible afterwards
Keep in mind that CM 10.2 and most other ROMs replace the kernel you currently have, if you want to flash another Custom ROM, flash 1. Rom.zip, 2. Gapps.zip & 3. Kernel.zip
H3llwar said:
1. There's an OTA update function which I used. Obviously, you didn't, it seems to be the nightly thats broken.
2. No, just flash it via ODIN
3. 3.XX worked just fine for me (changed to SlimBean yesterday as CM 10.2 seems too buggy for the moment)
4. You can flash just Dorimanx 9.34.tar, CM 10.2 & recovery should be acessible afterwards
Keep in mind that CM 10.2 and most other ROMs replace the kernel you currently have, if you want to flash another Custom ROM, flash 1. Rom.zip, 2. Gapps.zip & 3. Kernel.zip
Click to expand...
Click to collapse
Thank you very much for your help !
After flashing dorimanx kernel via odin was able to boot into recovery mode and flash the rom.
And yes the rom is very buggy maybe i will flash other rom meanwhile.
How is the slimbean rom ?
Rasra said:
Thank you very much for your help !
After flashing dorimanx kernel via odin was able to boot into recovery mode and flash the rom.
And yes the rom is very buggy maybe i will flash other rom meanwhile.
How is the slimbean rom ?
Click to expand...
Click to collapse
It's great!!!
Stable, fast, good battery life with shipped kernel, and just 81MB. I don't miss any feature that CM or AOKP have and it doesn't get bricked when installing Head Soccer like XenonHD does :victory:
Give it a try!
[Solved]
H3llwar said:
It's great!!!
Stable, fast, good battery life with shipped kernel, and just 81MB. I don't miss any feature that CM or AOKP have and it doesn't get bricked when installing Head Soccer like XenonHD does :victory:
Give it a try!
[Solved]
Click to expand...
Click to collapse
hi mate.
i really want to try the slimbean rom but for doing that i need your help (you r my private teacher )
The latest slimbean version appears on the official site is JB 4.22 built 8.
What actions it takes when you downgrade from cm 4.3 to slimbean 4.2.2 etc ?
Rasra said:
hi mate.
i really want to try the slimbean rom but for doing that i need your help (you r my private teacher )
The latest slimbean version appears on the official site is JB 4.22 built 8.
What actions it takes when you downgrade from cm 4.3 to slimbean 4.2.2 etc ?
Click to expand...
Click to collapse
It isn't different from any other ROM change because SlimBean ships with its own kernel and dorimanx supports both 4.3 and 4.2 ROMs:
In Recovery Mode:
1. Wipe data
2. Wipe cache
3. Flash Rom.zip
(Optional: 4. Flash Dorimanx 9.39.zip)
Hi friend
googled but, looks something different to ..
Im getting installation aborted status 7 during installation of kitkat
ROMs like cm-11-20140101-INFECTED-i9100 and super nexus
The same above rom has been flashed before worked well and no problem, now not able flash
tried using recovery.. original CWM apolo kernal(CWM), Philz kernal(CWM) and even TWRP
and deleted asserts in rom update scrip file still error status 7
But the thing is i can flash NeatROM lite using above Recovery
Im little scared i think it has been bricked?
Please help regarding above error
thippesh said:
Hi friend
googled but, looks something different to ..
Im getting installation aborted status 7 during installation of kitkat
ROMs like cm-11-20140101-INFECTED-i9100 and super nexus
The same above rom has been flashed before worked well and no problem, now not able flash
tried using recovery.. original CWM apolo kernal(CWM), Philz kernal(CWM) and even TWRP
and deleted asserts in rom update scrip file still error status 7
But the thing is i can flash NeatROM lite using above Recovery
Im little scared i think it has been bricked?
Please help regarding above error
Click to expand...
Click to collapse
its not bricked, if it was bricked you can't even start the phone so no worries.
first make sure your phone is a gt9100, if it is try to flash something else (just for a test), or download a other rom, like slimsaber. Please give a report back :highfive:
You flash the CWM 6.0.4.5 (KK Compatible)?
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Dampierre said:
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Click to expand...
Click to collapse
Exatcly. I raccomanded flash a KK ROM from CM 10.2 / ROM based-on-10.2
COMMON PROBLEM !
1. if your in TWRP install blazing kernal to get the lower version of cwm
2. if your getting error on cwm flash an older version CM 10.2
3. that's it fixed
4. or if your in cm 10.2 and still getting error in the sense corrupted download
hope it helps :good:
Dampierre said:
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Click to expand...
Click to collapse
Thank you all everyone to your kind replies and helping me out this problem,
has been solved by first flashing the gustavo's Kitkat kernel or kitkat Compatible Kernal
after that i can flash the KK rom
thanks thank you guys
-Marco said:
Exatcly. I raccomanded flash a KK ROM from CM 10.2 / ROM based-on-10.2
Click to expand...
Click to collapse
Does this mean I have to install ROM from CM 10.2?
This means I have to clean all my data n cache 1st. Thn install CM 10.2?
Thn clear data n cache again?
Thn install the Kit Kat ROM n GApps?
Yep
This recovery is more or less useless now. Files will still be hosted though.
ClockworkMod Recovery
Samsung Galaxy SII GT-I9100
All right guys im just going to keep this real nice and simple. Purpose of thread:
Latest CWM Recovery
Kit Kat 4.4 ROM Installation Compatible
Centralized Place to Put The Latest Recoveries
Just a heads up. This is NOT meant to be used as a kernel. I compiled these recoveries from source and only the recovery module is built therefore YOUR PHONE WILL NOT BOOT COMPLETELY AS THERE IS NO KERNEL. I made these recoveries so that users can flash
From ICS/JB to KK with ease
Flash This Over DorimanX Kernel So That You Can Update Your Kit Kat ROM
And Resolve Status 7 Errors When Flashing Kit Kat ROMs On A Out-Dated CWM Recovery
How To Use:
To Flash a Kit Kat ROM From a Out-Dated Recovery CWM Version Less Then 6.0.4.4:
Flash This CWM Recovery File (Does Not Matter Which Version You Pick Just Take The Latest) And Reboot Back Into Recovery Via The Option In The Advanced Menu
You Should Now Have A Grey Coloured Recovery With Version 6.0.4.X
Follow ROM Installation Guide From ROM Thread
Recovery Versions
Click The Numbers To Download e.g. 6.0.4.6
6.0.4.6 (Compiled From CM10.2 JB 4.3.1 Soruce)
6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST)
Thanks For Reading :good:
P.S. This is my first thread in the Galaxy SII forum
XDA:DevDB Information
ClockWorkMod Recovery For SGSII GT-I9100, Kernel for the Samsung Galaxy S II
Contributors
-Grift-, cyanogen
Kernel Special Features: Kit Kat Compatible CWM
Version Information
Status: Stable
Current Stable Version: 6.0.4.7
Stable Release Date: 2014-01-29
Created 2014-01-29
Last Updated 2014-08-16
good job! but i have to ask is Stweaks compatible?
Thanks for your efforts. Download link?
EDIT: Found it
edd89 said:
good job! but i have to ask is Stweaks compatible?
Click to expand...
Click to collapse
Its just the recovery module no use for stweaks :angel:
spectator123 said:
Thanks for your efforts. Download link?
Click to expand...
Click to collapse
Woa you guys are fast.. Just added
haha yes we are buddy keep up the good work
tried to flash this via CWM...does not work. am i doing anything wrong?
how do i install it normaly?
QuAn64m said:
tried to flash this via CWM...does not work. am i doing anything wrong?
how do i install it normaly?
Click to expand...
Click to collapse
Was there a error code?
Edit: Wait hold on you are using a GT-I9100G?????? This is only for the Exynos Galaxy SII GT-I9100/P/M/T
-Grift- said:
Was there a error code?
Click to expand...
Click to collapse
code 7 :-/
---------- Post added at 04:51 PM ---------- Previous post was at 04:29 PM ----------
QuAn64m said:
code 7 :-/
Click to expand...
Click to collapse
oops...my fault...i use a sgs2 G version. sorry !
can i flash this recovery on jb stock recovery??
scorpion.hbs said:
can i flash this recovery on jb stock recovery??
Click to expand...
Click to collapse
No you cannot but the fastest way to get from stock 4.1.2 to Kitkat 4.4 is to
1. Download this into external SDcard
2. Download my recovery and what ever ROM+Files you need into internal/external
3. Flash first file in stock recovery
4. Flash my recovery, reboot back into recovery
5. Wipe data+cache (factory reset)
6. Flash the ROM+Files
7. Reboot
:good:
@Grift, must say have been following your work/posts for sometime now and find/enjoy the way you can explain a lot of ( detail ) clearly without using many too English words. haha.
Thank you very much for this post & code CWM kk compatible.
foot note/tip. upgrade/flash Direct from ICS404 to KKat is possible But the user Must Format /system /data /cache within CWM Kkat as normal factory reset doesn't work for such a big version jump.(my thoughts/theory only).
Usual warning Nandroid backup First as all Rom data Lost doing it this way.
Copy of request below if possible. @Grift. If possible can you release a Temporary version of your (CWM kitkat with out kernel).
Similar to what Philz was releasing for GT i9100.
Reason for request. Is at moment Dorimanx kernel has older cwm. So when I flash permanent CWM kk compatible then re-flash Dori it can break 2nd ROM boot access/entry.
Therefore if possible a Temp version of what you are doing/releasing would be Perfect for my & others dualboot kitkat problems.
Thanks in advance bmad.
Barry Mad said:
@Grift, must say have been following your work/posts for sometime now and find/enjoy the way you can explain a lot of ( detail ) clearly without using many too English words. haha.
Thank you very much for this post & code CWM kk compatible.
foot note/tip. upgrade/flash Direct from ICS404 to KKat is possible But the user Must Format /system /data /cache within CWM Kkat as normal factory reset doesn't work for such a big version jump.(my thoughts/theory only).
Usual warning Nandroid backup First as all Rom data Lost doing it this way.
Copy of request below if possible. @Grift. If possible can you release a Temporary version of your (CWM kitkat with out kernel).
Similar to what Philz was releasing for GT i9100.
Reason for request. Is at moment Dorimanx kernel has older cwm. So when I flash permanent CWM kk compatible then re-flash Dori it can break 2nd ROM boot access/entry.
Therefore if possible a Temp version of what you are doing/releasing would be Perfect for my & others dualboot kitkat problems.
Thanks in advance bmad.
Click to expand...
Click to collapse
Will take a look into it:good:
@-Grift-
How much space is needed to compile a recovery in ubuntu? All, do I need trees used for building roms?
Aiko0923 said:
@-Grift-
How much space is needed to compile a recovery in ubuntu? All, do I need trees used for building roms?
Click to expand...
Click to collapse
I believe you do need the sources. From what I see you work on the Desire HD (Ace) ? Either you download the sources and compile from there or you can try Koush's CWM builder ( just search CWM builder on google ). As for source code Cm10.2 source can be upwards of 10GB easily. For the DHD im not sure if you guys have official CM11 source?
-Grift- said:
I believe you do need the sources. From what I see you work on the Desire HD (Ace) ? Either you download the sources and compile from there or you can try Koush's CWM builder ( just search CWM builder on google ). As for source code Cm10.2 source can be upwards of 10GB easily. For the DHD im not sure if you guys have official CM11 source?
Click to expand...
Click to collapse
We've got unofficial builds of cm11, and most devs have release pretty stable device and kernel trees. Thanks, 10GB isn't bad at all, but will it require me to setup my Build Environment differently?
Cwm
I'm running cwm version 5.8.1.5 and on stock rom 4.1.2. I am thinking of upgrading to 4.4.2. So can u just explain how to proceed with the recovery installation?
Okay can anyone help me? My odin 3.09 while flashing cwm 6.0.2.9 said reset instead of pass. Then phone turned off. After that I can only access download mode and it shows flash counter 2 times. Any help? Was running stock 4.1.2 rooted.
Sent from my Nexus 4
Sent from my Nexus 4
AndroidReborn said:
Okay can anyone help me? My odin 3.09 while flashing cwm 6.0.2.9 said reset instead of pass. Then phone turned off. After that I can only access download mode and it shows flash counter 2 times. Any help? Was running stock 4.1.2 rooted.
Sent from my Nexus 4
Sent from my Nexus 4
Click to expand...
Click to collapse
Flash this in odin
http://www.dorimanx.shine.sk/Androi...rimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
My rom is stock 4.1.2 and using cwm 6.0.1.5 but i can't flash anything include CWM 6.0.4.7 i back recovery and flash CWM 6.0.4.7 but it's error help please
Sent from my GT-i9100 by Tapatalk Pro ♠
6.0.4.8 is already out
Regards
Hello
I am newbies can you help me for see better. I see Recovery compatibility KitKat for Rom 4.4 but not always.
We must install recovery compatibility KitKat always Rom up 4.4 or if you not specified is not necessary ?
Sorry but I dont speak very well english.
Thank you
Tipunchcalimero said:
Hello
I am newbies can you help me for see better. I see Recovery compatibility KitKat for Rom 4.4 but not always.
We must install recovery compatibility KitKat always Rom up 4.4 or if you not specified is not necessary ?
Sorry but I dont speak very well english.
Thank you
Click to expand...
Click to collapse
1- If you are asking about "how to install a 4.4 custom ROM for your i9100, you need CWM 6.0.4.6 or 6.0.4.7, and the recovery can do the rest for you in terms of flashing and all.
2- If you are looking for a KitKat Compatible recovery, I would rather advise you doing some searching or simply googling "CWM-6.0.4.7-I9100.zip" and downloading it to your SD card in order to flash it.
However, the only way to install the new Kitkat based firmwares for the i9100 imply you to use the latest CWM (or TWRP latest) in order to have support for metadata, and if I didn't answer your question, simply be more specific (your current ROM, OS version, Kernel... etc)
Paul_Kolanjian said:
1- If you are asking about "how to install a 4.4 custom ROM for your i9100, you need CWM 6.0.4.6 or 6.0.4.7, and the recovery can do the rest for you in terms of flashing and all.
2- If you are looking for a KitKat Compatible recovery, I would rather advise you doing some searching or simply googling "CWM-6.0.4.7-I9100.zip" and downloading it to your SD card in order to flash it.
However, the only way to install the new Kitkat based firmwares for the i9100 imply you to use the latest CWM (or TWRP latest) in order to have support for metadata, and if I didn't answer your question, simply be more specific (your current ROM, OS version, Kernel... etc)
Click to expand...
Click to collapse
I have understand and I try again with the lastest CWM or TWRP. I had forgotten to install the latest recovery.
Tank you for your answer
Tipunchcalimero said:
I have understand and I try again with the lastest CWM or TWRP. I had forgotten to install the latest recovery.
Tank you for your answer
Click to expand...
Click to collapse
You're welcome buddy
cuboosh said:
where is this cab located? the ver built into wm6 rom is newer then the retail or so it appears by the build.. so ur saying if we re-install the one built into the rom it will work? if so where is the cab stored.
also.. does neone notice when calls come in thru BT while ur on a call it beeps like 6 times b4 it lets u anwser the call.. i find this rather annoying..its almost like it beeps in echos lol
Click to expand...
Click to collapse
http://d-h.st/gTF
Sent from my GT-I9100 using Tapatalk 2